Recupero dimensione corrente orgetto per stampa

- aggiornamento info programma.

Constants/ConstIni.vb

@@ -104,6 +104,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
@@ -125,6 +126,7 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
    Public Const K_DRAGRECTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

EgtStoneLib/CamAuto.vb

@@ -149,6 +149,14 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllBridges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
    ' verifico che il contorno passato non sia stato separato
    Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer) As Boolean
       Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)

EgtStoneLib/ConstMach.vb

@@ -158,6 +158,8 @@ Module ConstMach
    Public Const NAME_UNDERDRILL As String = "UnderDrill"
    ' Nome layer preview
    Public Const NAME_PREVIEW As String = "PV"
+   Public Const NAME_BRIDGES As String = "Bridges"
+   Public Const NAME_BRIDGESLINE As String = "BridgeLine"
    ' Info in layer contorno interno per FiloTop
    Public Const INFO_FILOTOP As String = "FiloTop"
    Public Const INFO_ROUNDOFF As String = "RoundOff"
@@ -324,6 +326,9 @@ Module ConstMach
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

EgtStoneLib/CurrentMachine.vb

@@ -1418,7 +1418,7 @@ Friend Property sCurrMillNoTip As String
    ' recupro dalla lista delle macchine l'oggetto associato al nome indicato
    Public Sub GetMachineClass(sMachineName As String)
       For Each Item In OmagOFFICEMap.refMachinePanelVM.MachineList
-         If Item.Name = sMachineName Then
+         If string.Compare(Item.Name, sMachineName, True) = 0 Then
             OmagOFFICEMap.refMachinePanelVM.SelectedMachine = Item
             Exit For
          End If

EgtStoneLib/SplitAuto.vb

@@ -92,11 +92,12 @@ Public Module SplitAuto
                   Mach.m_dStartFreeLen = FREELEN_INF + 1
                   Mach.m_dEndFreeLen = FREELEN_INF + 1
                   Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
+                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
                      EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
                      Mach.m_bEnableInvert = GetEnableInvert(nEntId)
                      EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)

EgtStoneLib/VacuumCups.vb

@@ -444,15 +444,14 @@ Module VacuumCups
          Dim dLen, dAngVertDeg, dAngOrizzDeg As Double
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
-         If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dPreferredRot As Double = m_dPreferredRot
-         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+         If bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
             Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
-         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+         ElseIf bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
             ' se l'orientemanto è orizzontale e la macchina è stata abilitata
             If frMinRect.Orig().y < b3Tab.Center().y Then
                dPreferredRot = m_dPrefVertRotYPlus
@@ -460,6 +459,7 @@ Module VacuumCups
                dPreferredRot = m_dPrefVertRotYMinus
             End If
          End If
+         If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
          While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
@@ -530,6 +530,13 @@ Module VacuumCups
       Return dDist
    End Function
 
+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
    ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
       Dim dX, dY, dZ As Double

EgtStoneLib/VeinMatchingWindow.xaml.vb

@@ -29,6 +29,13 @@ Public Class VeinMatchingWindow
    Private m_locPrev As System.Drawing.Point
    Private m_ptPrev As Point3d
    Private m_ptCen As Point3d
+   ' Gestione rotazione pezzi in fase di Drag
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False
 
    Private Sub Window_Initialized(sender As Object, e As EventArgs)
       ' Assegnazione scena all'host e posizionamento nella PlacePageGrid

InstrumentPanel/PrintPanelV.xaml

@@ -0,0 +1,14 @@
+<EgtFloating:EgtFloatingPanel x:Class="PrintPanelV"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+   IsTopDockable="True" IsBottomDockable="False" IsLeftDockable="False"
+   IsRightDockable="False" Style="{StaticResource ToolBar_EgtFloatingPanel}">
+
+   <Button ToolTip="{Binding PrintToolTip}"
+           Style="{StaticResource ToolBar_Button}"
+           Command="{Binding PrintCommand}">
+      <Image Source="/Resources/InstrumentPanel/Print.png" Stretch="Uniform"/>
+   </Button>
+
+</EgtFloating:EgtFloatingPanel>

InstrumentPanel/PrintPanelV.xaml.vb

@@ -0,0 +1,3 @@
+Public Class PrintPanelV
+
+End Class

InstrumentPanel/PrintPanelVM.vb

@@ -0,0 +1,84 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+Public Class PrintPanelVM
+
+   ' Definizione comandi
+   Private m_cmdPrint As ICommand
+
+   Public ReadOnly Property PrintToolTip As String
+      Get
+         Return "Print shading" & vbCrLf & "Print hidden line (Shift)"
+      End Get
+   End Property
+
+#Region "PrintCommand"
+
+   Public ReadOnly Property PrintCommand As ICommand
+      Get
+         If m_cmdPrint Is Nothing Then
+            m_cmdPrint = New Command(AddressOf Print)
+         End If
+         Return m_cmdPrint
+      End Get
+   End Property
+
+   Public Sub Print(ByVal param As Object)
+      Dim SM_Select As SM = SM.SHADING
+      If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+         SM_Select = SM.HIDDENLINE
+         EgtSetLineAttribs(3)
+      End If
+      Dim printDlg As New PrintDialog
+      Dim sPath = OmagOFFICEMap.refMainWindowVM.MainWindowM.sTempDir & "\Image.png"
+      If printDlg.ShowDialog() Then
+         ' Recupero le dimensioni dell'area di stampa
+         Dim dW As Double = printDlg.PrintableAreaWidth
+         Dim dH As Double = printDlg.PrintableAreaHeight
+         Try
+            ' Creo l'immagine da allegare
+            ' EgtZoom(ZM.ALL, True)
+            ' Prendo l'immagine per la stampa
+            Dim colWhite As New Color3d(255, 255, 255)
+            Dim nImgW As Integer = GetWidthDimProjectV()
+            Dim nImgH As Integer = GetHeightDimProjectV()
+            If Not EgtGetImage(SM_Select, colWhite, colWhite, nImgW, nImgH, sPath) Then
+               ' Error in creating the print image
+               EgtOutLog(EgtMsg(50181))
+               EgtSetLineAttribs(1)
+               Return
+            End If
+            EgtSetLineAttribs(1)
+            'Metodo complesso di stampa che permette di rilasciare il file :
+            'carico la bitmap e la metto in uno stream in memoria
+            Dim stream As System.IO.Stream = New System.IO.MemoryStream()
+            Dim bitmap As System.Drawing.Bitmap = New System.Drawing.Bitmap(sPath)
+            bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Png)
+            bitmap.Dispose()
+            ' la sposto in una BitmapImage
+            Dim bitImage As New System.Windows.Media.Imaging.BitmapImage()
+            bitImage.BeginInit()
+            bitImage.StreamSource = stream
+            bitImage.EndInit()
+            ' la sposto in un Visual Control
+            Dim tmpImg As New Image
+            tmpImg.BeginInit()
+            tmpImg.Source = bitImage
+            'tmpImg.Margin = New Thickness(-100)
+            tmpImg.Stretch = Stretch.Uniform
+            ' ruoto a seconda dell'aspetto della pagina
+            'If (dH > dW And nImgH < nImgW) Or (dH < dW And nImgH > nImgW) Then
+            '   tmpImg.LayoutTransform = New RotateTransform(-90)
+            'End If
+            tmpImg.EndInit()
+            ' eseguo la stampa
+            printDlg.PrintVisual(tmpImg, "Parts Layout")
+         Catch
+            ' Rrror in executing print
+            EgtOutLog(EgtMsg(50182))
+         End Try
+      End If
+   End Sub
+
+#End Region ' PrintCommand
+
+End Class

MachinePanel/MyMachinePanelVM.vb

@@ -95,26 +95,19 @@ Public Class MyMachinePanelVM
       OmagOFFICEMap.SetRefMachinePanelVM(Me)
       ' recupero cartella radice delle macchine
       m_sMachinesRoot = OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot
-      ' trasformo l'elenco dei direttori macchina in una stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
-      Dim sMchRoots As String = m_sMachinesRoot
-
-      '' Carica macchine da cartella delle macchine
-      'For Each MachDir In OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRootList
-      '   sMchRoots &= MachDir & "|"
-      'Next
-      '' rimuovo dalla stringa l'ultimo carattere inserito
-      'sMchRoots = sMchRoots.Remove(sMchRoots.Length - 1, 1)
-
-      ' procedo ad inizializzare la classe → carico la lista "MachineList" che visualizzo per l'inserimento di nuvoi MachGroup
-      Machine.MachineListInit(sMchRoots, MachineList)
-      ' Inizializzo valori visibilità parametri Db utensili e lavorazioni
-      OmagOFFICETMDbParamVisibility.Init()
    End Sub
 
 #End Region    ' CONSTRUCTOR
 
 #Region "METHODS"
 
+   Public Sub Init( sMchRoots As String)
+      ' procedo ad inizializzare la classe → carico la lista "MachineList" che visualizzo per l'inserimento di nuovi MachGroup
+      Machine.MachineListInit(sMchRoots, MachineList)
+      ' Inizializzo valori visibilità parametri Db utensili e lavorazioni
+      OmagOFFICETMDbParamVisibility.Init()
+   End Sub
+
    ''' <summary>
    ''' Execute the Exec.  This method is invoked by the ExecCommand.
    ''' </summary>

MainWindow/MainWindowM.vb

@@ -184,13 +184,6 @@ Public Class MainWindowM
       Directory.CreateDirectory(m_sBackUpDir)
       ' Impostazione path resources dir
       m_sResourcesRoot = m_sDataRoot & "\" & RES_DIR
-      ' Impostazione direttorio per le macchine
-      If GetMainPrivateProfileString(S_MACH, K_MACHINESDIR, "", m_sMachinesRoot) = 0 Then
-         m_sMachinesRoot = m_sDataRoot & "\" & MACHINES_DFL_DIR
-      End If
-
-      ' carico eleco dei direttori
-      If Not String.IsNullOrEmpty(m_sMachinesRoot) Then m_sMachinesRootList.Add(m_sMachinesRoot)
       Dim nIndexDir As Integer = 1
       Dim sCurrMachineDir As String = String.Empty
       While GetMainPrivateProfileString(S_MACH, K_MACHINESDIR & nIndexDir.ToString, "", sCurrMachineDir) <> 0
@@ -199,7 +192,12 @@ Public Class MainWindowM
          End If
          nIndexDir += 1
       End While
-
+      ' Impostazione direttorio (versioni precedenti 2.4i2) per le macchine
+      If GetMainPrivateProfileString(S_MACH, K_MACHINESDIR, "", m_sMachinesRoot) = 0 Then
+         m_sMachinesRoot = m_sDataRoot & "\" & MACHINES_DFL_DIR
+      End If
+      ' Carico il direttorio nell'elenco dei direttori macchina
+      If Not String.IsNullOrEmpty(m_sMachinesRoot) Then m_sMachinesRootList.Add(m_sMachinesRoot)
       ' Impostazione direttorio per toolmakers
       If GetMainPrivateProfileString(S_MACH, K_TOOLMAKERSDIR, "", m_sToolMakersDir) = 0 Then
          m_sToolMakersDir = m_sDataRoot & "\" & TOOLMAKERS_DFL_DIR
@@ -225,8 +223,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2502, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
+                            EgtGetKeyOptions(9423, 2502, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -310,7 +308,7 @@ Public Class MainWindowM
    ' verifico che il nome da inserire non esista già in elenco
    Private Function VerifyMachineIsUnique(sMachDir As String) As Boolean
       For Each sDir As String In m_sMachinesRootList
-         If sDir.ToLower.Trim = sMachDir.ToLower.Trim Then
+         If String.Compare( sDir.Trim().TrimEnd("\"c), sMachDir.Trim().TrimEnd("\"c), True) = 0 Then
             Return False
          End If
       Next

My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")> 
 <Assembly: AssemblyProduct("OmagOFFICE")>
-<Assembly: AssemblyCopyright("Copyright ©  2017-2022 by Egalware s.r.l.")> 
+<Assembly: AssemblyCopyright("Copyright ©  2017-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 'In order to begin building localizable applications, set 
@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.6.1")>
+<Assembly: AssemblyVersion("2.5.2.1")>
-<Assembly: AssemblyFileVersion("2.4.6.1")>
+<Assembly: AssemblyFileVersion("2.5.2.1")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -33,18 +33,22 @@ Public Class MyMachGroupPanelVM
 
    Sub New()
       MyBase.New()
-      ' Recupero la macchina di default
-      Dim sDefaultMachine As String = String.Empty
-      GetMainPrivateProfileString(S_MACH, K_CURRMACH, "", sDefaultMachine)
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefMachGroupPanelVM(Me)
-      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(), sDefaultMachine, BASE_MACH_GROUP & "1")
    End Sub
 
 #End Region    ' CONSTRUCTOR
 
 #Region "METHODS"
 
+   Public Sub Init()
+      ' Recupero la macchina di default
+      Dim sDefaultMachine As String = String.Empty
+      GetMainPrivateProfileString(S_MACH, K_CURRMACH, "", sDefaultMachine)
+      EgtSetCurrMachine(sDefaultMachine)
+      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(), sDefaultMachine, BASE_MACH_GROUP & "1")
+   End Sub
+
    Public Overrides Sub AddMachGroup()
       If NewMachGroup() Then
          ' creo oggetto gruppo creato
@@ -70,7 +74,9 @@ Public Class MyMachGroupPanelVM
          Dim sMachine As String = String.Empty
          EgtGetMachGroupName(nId, sName)
          EgtGetMachGroupMachineName(nId, sMachine)
-         MachGroupList.Add(New MyMachGroup(nId, sName, sMachine, EgtGetFirstNameInGroup(nId, "Opers")))
+         Dim NewMyMachGoup As MyMachGroup = New MyMachGroup(nId, sName, sMachine, EgtGetFirstNameInGroup(nId, "Opers"))
+         NewMyMachGoup.IsValid = VerifyMachExists(sMachine)
+         MachGroupList.Add(NewMyMachGoup)
          If OmagOFFICEMap.refMainWindowVM.MainWindowM.m_SlabDB Then
             Dim sSlabNameDB As String = String.Empty
             EgtGetInfo(nId, INFO_SLABNAME, sSlabNameDB)
@@ -154,6 +160,7 @@ Public Class MyMachGroupPanelVM
       ' Imposto vista solo tavola
       EgtSetMachineLook(MCH_LOOK.TAB)
       CurrentMachine.GetMachineClass(SelectedMachGroup.Machine)
+      If IsNothing(OmagOFFICEMap.refMachinePanelVM.SelectedMachine) Then Return False
       OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
       ' Ricarico la macchina corrente
       InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, SelectedMachGroup.Machine,

MySceneHost/MySceneHostVM.vb

@@ -33,8 +33,15 @@ Public Class MySceneHostVM
          ' Recupero e imposto handle finestra principale
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
+         ' Recupero l'elenco dei direttori radice macchina come stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+         Dim sMchRoots As String = GetMachineBaseDirs()
          ' inizializzo gestore lavorazioni
-         EgtInitMachMgr(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
+         If Not EgtInitMachMgr(sMchRoots, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir) Then
+            EgtOutLog("Error on loading machines roots: " & sMchRoots)
+         End If
+         ' inizializzo gestione più macchine
+         OmagOFFICEMap.refMachinePanelVM.Init(sMchRoots)
+         OmagOFFICEMap.refMachGroupPanelVM.Init()
          Return
       End If
       ' Problemi
@@ -157,6 +164,21 @@ Public Class MySceneHostVM
       MainScene.SetStatusNull()
    End Sub
 
+   Private Function GetMachineBaseDirs() As String
+      ' Trasformo l'elenco dei direttori radice macchina in una stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = ""
+      ' Pulisco eventuali caratteri nascosti: origString.Replace(vbCr, "").Replace(vbLf, "")
+      For Each MachDir In OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRootList
+         MachDir = MachDir.Replace(vbCr, "").Replace(vbLf, "")
+         sMchRoots &= MachDir & "|"
+      Next
+      ' rimuovo dalla stringa l'ultimo carattere "|" inserito
+      sMchRoots = sMchRoots.Remove(sMchRoots.Length - 1, 1)
+      If String.IsNullOrEmpty(sMchRoots) Then sMchRoots = OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot
+      EgtOutLog("Machine root list: " & sMchRoots)
+      Return sMchRoots
+   End Function
+
 #End Region    ' METHODS
 
 #Region "ProjectManager"
@@ -240,7 +262,9 @@ Public Class MySceneHostVM
       ' Creo un contesto separato con gestore lavorazioni per poter spezzettare il progetto
       Dim nCurrCtx As Integer = EgtGetCurrentContext()
       Dim nCtx As Integer = EgtInitContext()
-      EgtInitMachMgr(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
+      ' Recupero l'elenco dei direttori radice macchina come stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = GetMachineBaseDirs()
+      EgtInitMachMgr(sMchRoots, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
       ' Per ogni gruppo di lavoro
       For Each nMchGrpId As Integer In vMchGrps
          ' Carico il progetto
@@ -408,7 +432,9 @@ Public Class MySceneHostVM
       ' Creo un contesto separato con gestore lavorazioni per poter spezzettare il progetto
       Dim nCurrCtx As Integer = EgtGetCurrentContext()
       Dim nCtx As Integer = EgtInitContext()
-      EgtInitMachMgr(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
+      ' Recupero l'elenco dei direttori radice macchina come stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = GetMachineBaseDirs()
+      EgtInitMachMgr(sMchRoots, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
       ' Per ogni gruppo di lavoro
       For Each nMchGrpId As Integer In vMchGrps
          ' Carico il progetto
@@ -801,6 +827,7 @@ Public Class MySceneHostVM
          Case OptionPanelVM.Tabs.NESTING
             OmagOFFICEMap.refNestingTabVM.OnKeyDownScene(sender, e)
          Case OptionPanelVM.Tabs.MACHINING
+            OmagOFFICEMap.refSplitModeVM.OnKeyDownScene(sender, e)
          Case OptionPanelVM.Tabs.SIMUL
       End Select
    End Sub

OmagOFFICE.vbproj

@@ -213,7 +213,11 @@
     <Compile Include="EgtStoneLib\VeinMatchingWindow.xaml.vb">
       <DependentUpon>VeinMatchingWindow.xaml</DependentUpon>
     </Compile>
+    <Compile Include="InstrumentPanel\PrintPanelV.xaml.vb">
+      <DependentUpon>PrintPanelV.xaml</DependentUpon>
+    </Compile>
     <Compile Include="InstrumentPanel\MyInstrumentPanelVM.vb" />
+    <Compile Include="InstrumentPanel\PrintPanelVM.vb" />
     <Compile Include="MachinePanel\MyMachinePanelVM.vb" />
     <Compile Include="MyMachGroupPanel\MyMachGroupPanelVM.vb" />
     <Compile Include="MachinePanel\MachinePanelV.xaml.vb">
@@ -389,6 +393,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="InstrumentPanel\PrintPanelV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="MachinePanel\MachinePanelV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -691,6 +699,9 @@
   <ItemGroup>
     <Resource Include="Resources\TopCommandBar\DxfOut.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\InstrumentPanel\Print.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagOFFICE\OmagOFFICER32.exe

OptionPanel/MachiningTab/SplitModeV.xaml

@@ -69,23 +69,38 @@
          <StackPanel>
             
             <UniformGrid Columns="3" Margin="0,0,0,5">
+                <Grid>
+                   <Button Content="{Binding CutMsg}"
+                           Style="{StaticResource OptionPanel_TextWrapButton}"
+                           Command="{Binding CutCommand}"
+                           Visibility="{Binding CutBtnVisibility}"
+                           Margin="0,0,2.5,0"/>
+                   <ToggleButton Grid.Row="0"
+                           Content="{Binding BridgeMsg}"           
+                           Style="{StaticResource OptionPanel_ToggleWrapButton}"
+                           IsChecked="{Binding BridgeBtn_IsChecked}"
+                           Visibility="{Binding BridgeBtnVisibility}"
+                           Margin="0,0,2.5,0" Padding="0"/>
+                </Grid>
                 
-               <Button Content="{Binding CutMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding CutCommand}"
-                       Visibility="{Binding CutBtnVisibility}"
-                       Margin="0,0,2.5,0"/>
                <Button Content="{Binding CutStartMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding CutStartCommand}"
                        Visibility="{Binding CutStartBtnVisibility}"
                        Margin="2.5,0,2.5,0"/>
-               <Button Content="{Binding CutEndMsg}"
+               <Grid>
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
+                  <Button Content="{Binding CutEndMsg}"
-                       Command="{Binding CutEndCommand}"
+                          Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Visibility="{Binding CutEndBtnVisibility}"
+                          Command="{Binding CutEndCommand}"
-                       Margin="2.5,0,0,0"/>
+                          Visibility="{Binding CutEndBtnVisibility}"
-               
+                          Margin="2.5,0,0,0"/>
+                  <ToggleButton Grid.Row="0"
+                         Content="{Binding BridgeDeleteMsg}"      
+                         Style="{StaticResource OptionPanel_ToggleWrapButton}"
+                         IsChecked="{Binding BridgeDeleteBtn_IsChecked}"
+                         Visibility="{Binding BridgeDeleteBtnVisibility}"
+                         Margin="2.5,0,0,0" Padding="0"/>
+               </Grid>
             </UniformGrid>
 
             <Grid Visibility="{Binding AllExtRedVisibility}">
@@ -144,11 +159,13 @@
                        Command="{Binding OutCenEndCommand}"
                        Visibility="{Binding OutCenEndBtnVisibility}"
                        Margin="0,0,2.5,0" Padding="0"/>
+
                <Button Content="{Binding AllOutEndMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
+                   Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding AllOutEndCommand}"
+                   Command="{Binding AllOutEndCommand}"
-                       Visibility="{Binding AllOutEndBtnVisibility}"
+                   Visibility="{Binding AllOutEndBtnVisibility}"
-                       Margin="2.5,0,2.5,0"/>
+                   Margin="2.5,0,2.5,0"/>
+
                <Button Content="{Binding AllCenEndMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding AllCenEndCommand}"

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -25,6 +25,20 @@ Public Class SplitModeVM
    ' verifico che le lavorazioni selezionate siano omogenee (con lo stesso utensile)
    Private m_bAreHomogeneous As Boolean = False
 
+   ' Id tagli WJ per generazione ponticelli tra due percorsi
+   Private m_nIdSelectedPartWJ_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSideWJ_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedPartWJ_End As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSideWJ_End As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet_End As Integer = GDB_ID.NULL
+   ' Id gruppo Bridges (Nuovo da versione 30/08/2022)
+   Private m_nIdBridgesGroup As Integer = GDB_ID.NULL
+   'Private m_nIdBridgeLineGroup As Integer = GDB_ID.NULL
+   Private m_nIdBridge As Integer = GDB_ID.NULL
+   Private m_ptSrtBridge As New Point3d
+   Private m_ptEndBridge As New Point3d
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Drag
@@ -34,6 +48,8 @@ Public Class SplitModeVM
    Private m_bDragging As Boolean = False
    ' Selected cut
    Private m_nSelected As Integer = GDB_ID.NULL
+   ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
+   Private m_StartEndModifyOnIntCorner As Boolean = False
 
    Private m_ItemList As New ObservableCollection(Of NameIdLsBxItem)
    Public ReadOnly Property ItemList As ObservableCollection(Of NameIdLsBxItem)
@@ -218,6 +234,52 @@ Public Class SplitModeVM
       End Set
    End Property
 
+   Private m_BridgeBtnVisibility As Visibility = Visibility.Hidden
+   Public Property BridgeBtnVisibility As Visibility
+      Get
+         Return m_BridgeBtnVisibility
+      End Get
+      Set(value As Visibility)
+         m_BridgeBtnVisibility = value
+         NotifyPropertyChanged(NameOf(BridgeBtnVisibility))
+      End Set
+   End Property
+
+   Private m_BridgeDeleteBtnVisibility As Visibility = Visibility.Hidden
+   Public Property BridgeDeleteBtnVisibility As Visibility
+      Get
+         Return m_BridgeDeleteBtnVisibility
+      End Get
+      Set(value As Visibility)
+         m_BridgeDeleteBtnVisibility = value
+         NotifyPropertyChanged(NameOf(BridgeDeleteBtnVisibility))
+      End Set
+   End Property
+
+   Private m_BridgeBtn_IsChecked As Boolean = False
+   Public Property BridgeBtn_IsChecked As Boolean
+      Get
+         Return m_BridgeBtn_IsChecked
+      End Get
+      Set(value As Boolean)
+         m_BridgeBtn_IsChecked = value
+         BridgeIsChecked()
+         NotifyPropertyChanged(NameOf(BridgeBtn_IsChecked))
+      End Set
+   End Property
+
+   Private m_BridgeDeleteBtn_IsChecked As Boolean = False
+   Public Property BridgeDeleteBtn_IsChecked As Boolean
+      Get
+         Return m_BridgeDeleteBtn_IsChecked
+      End Get
+      Set(value As Boolean)
+         m_BridgeDeleteBtn_IsChecked = value
+         BridgeDeleteIsChecked()
+         NotifyPropertyChanged(NameOf(BridgeDeleteBtn_IsChecked))
+      End Set
+   End Property
+
 #Region "Messages"
 
    Public ReadOnly Property OnOffMsg As String
@@ -328,6 +390,18 @@ Public Class SplitModeVM
       End Get
    End Property
 
+   Public ReadOnly Property BridgeMsg As String
+      Get
+         Return "Bridge"
+      End Get
+   End Property
+
+   Public ReadOnly Property BridgeDeleteMsg As String
+      Get
+         Return "Delete Bridge"
+      End Get
+   End Property
+
 #End Region    ' Messages
 
    ' Definizione comandi
@@ -367,9 +441,16 @@ Public Class SplitModeVM
 
    Friend Function InitSplitRaw() As Boolean
       m_bActive = True
+      ' aggiorno la visualizzazione dei comandi per generare i bridge
+      m_BridgeBtn_IsChecked = False
+      NotifyPropertyChanged(NameOf(BridgeBtn_IsChecked))
+      m_BridgeDeleteBtn_IsChecked = False
+      NotifyPropertyChanged(NameOf(BridgeDeleteBtn_IsChecked))
       'm_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_nDragInd = -1
       m_nDragType = 0
+      ' verifico se è abilitata la possibiltà di allungare i lati interni
+      m_StartEndModifyOnIntCorner = (GetPrivateProfileInt(S_NEST, K_STARTENDMODIFYONINTCORNER, 0, sMachIniFile) <> 0)
       ' Nascondo eventuali pezzi in parcheggio
       EstCalc.HideParkedParts()
       ' Nascondo eventuale contorno da foto
@@ -433,6 +514,9 @@ Public Class SplitModeVM
 
    Friend Function ExitSplitRaw(Optional bTrueExit As Boolean = True) As Boolean
       m_bActive = False
+      ' eventualmente interrompo la creazione dei ponticelli
+      DeselectWJBridgesPart()
+
       ' Rimuovo evidenziazione e numeri
       RemoveMarkAndNumbers()
       ' Ripristino colori lavorazioni
@@ -777,6 +861,21 @@ Public Class SplitModeVM
          AllReduceBtnVisibility = Visibility.Visible
       End If
 
+      ' gestione bottone per generazione ponticelli
+      If Type = MCH_OY.WATERJETTING Then
+         ' siccome la stessa posizione è occupata da due comandi sovrapposti
+         If CutBtnVisibility = Visibility.Hidden Then
+            BridgeBtnVisibility = Visibility.Visible
+            BridgeDeleteBtnVisibility = Visibility.Visible
+         Else
+            BridgeBtnVisibility = Visibility.Hidden
+            BridgeDeleteBtnVisibility = Visibility.Hidden
+         End If
+      Else
+         BridgeBtnVisibility = Visibility.Hidden
+         BridgeDeleteBtnVisibility = Visibility.Hidden
+      End If
+
    End Sub
 
    Private Function ModifyOtherLeadIn(nI As Integer, nLiOthType As Integer) As Boolean
@@ -1041,6 +1140,45 @@ Public Class SplitModeVM
       EgtSetInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_EAL, dOrigUsal)
    End Sub
 
+   Private Sub BridgeIsChecked()
+      ' eventualmente spengo il comando per eliminare i ponticelli
+      If m_BridgeDeleteBtn_IsChecked Then
+         m_BridgeDeleteBtn_IsChecked = False
+         NotifyPropertyChanged(NameOf(BridgeDeleteBtn_IsChecked))
+      End If
+      ' se deseleziono resetto tutte le variabili
+      If Not m_BridgeBtn_IsChecked Then
+         ' se sono in fase di creazione di un ponticello interrompo
+         DeselectWJBridgesPart()
+         Return
+      End If
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = NAME_BRIDGES
+      Dim nId As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nId <> GDB_ID.NULL Then
+         m_nIdBridgesGroup = nId
+      End If
+      ' se non lo trovo allora lo creo
+      If nId = GDB_ID.NULL Then
+         m_nIdBridgesGroup = EgtCreateGroup(nIdCurrMachGroup)
+         EgtSetName(m_nIdBridgesGroup, NAME_BRIDGES)
+      End If
+   End Sub
+
+   Private Sub BridgeDeleteIsChecked()
+      ' eventualmente spengo il comando per inserire i ponticelli
+      If m_BridgeBtn_IsChecked Then
+         m_BridgeBtn_IsChecked = False
+         NotifyPropertyChanged(NameOf(BridgeBtn_IsChecked))
+      End If
+
+      If Not m_BridgeDeleteBtn_IsChecked Then
+         DeselectWJBridgesPart()
+      End If
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -1833,10 +1971,27 @@ Public Class SplitModeVM
 
             Dim bRepeat As Boolean = False
             Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, CurrentMachine.sMachIniFile), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                  End If
+               End If
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
-               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then Return
+               ' verifico che non sia sull'angolo interno (altrimenti vieto la modifica)
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUsal < -10 * EPS_SMALL) Then
+                  Return
+               End If
                EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
                EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
                UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
@@ -1996,10 +2151,24 @@ Public Class SplitModeVM
             End If
             Dim bRepeat As Boolean = False
             Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, CurrentMachine.sMachIniFile), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                  End If
+               End If
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUeal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
@@ -2138,8 +2307,6 @@ Public Class SplitModeVM
 
 #Region "InvertCommand"
 
-#End Region    ' InvertComman
-
    Public ReadOnly Property InvertCommand As ICommand
       Get
          If m_cmdInvert Is Nothing Then
@@ -2196,10 +2363,248 @@ Public Class SplitModeVM
       Next
    End Sub
 
+#End Region    ' InvertComman
+
 #End Region       ' COMMANDS
 
 #Region "EVENTS"
 
+#Region "BRIDGE"
+
+   Private Sub OnMyMouseDownSceneBridges(sender As Object, e As System.Windows.Forms.MouseEventArgs,
+                                         ByVal IsFirst As Boolean,
+                                         ByRef m_nIdSelectedSideWJ As Integer,
+                                         ByRef m_nIdSelectedWaterJet As Integer,
+                                         ByRef nIdParentPart As Integer)
+
+      ' Acquisisco punto da disegno
+      Dim CurrPoint As New Point3d
+      EgtUnProjectPoint(e.Location, CurrPoint)
+
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If (EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE) AndAlso VerifySideIsAcceptable(nIdMy) Then
+               If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
+                  EgtDeselectObj(m_nIdSelectedSideWJ)
+               End If
+               ' recupero il gruppo della lavorazione associata
+               nIdParentPart = EgtGetParent(nIdParent)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If IsWaterJetting(nIdMy) Then
+                  m_nIdSelectedSideWJ = nIdMy
+                  ' recupero il punto più vicino alla curva passata
+                  If IsFirst Then
+                     EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptSrtBridge)
+                  Else
+                     ' prima di confermare verifico che non ci siano interferenze
+                     EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptEndBridge)
+                     EgtModifyCurveEndPoint(m_nIdBridge, m_ptEndBridge, GDB_RT.GLOB)
+                     If VerifyInterference(m_nIdBridge) Then
+                        OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+                        EgtSetInfo(m_nIdBridge, "PartStart", m_nIdSelectedPartWJ_Srt)
+                        EgtSetInfo(m_nIdBridge, "EntStart", m_nIdSelectedSideWJ_Srt)
+                        EgtSetInfo(m_nIdBridge, "PartEnd", m_nIdSelectedPartWJ_End)
+                        EgtSetInfo(m_nIdBridge, "EntEnd", m_nIdSelectedSideWJ_End)
+                        EgtSetInfo(m_nIdBridge, "Ph", EgtGetCurrPhase())
+                        ' Ricalcolo tutte le lavorazioni
+                        Dim nWarn As Integer = 0
+                        ResetAllMachinings(nWarn)
+                     Else
+                        ' attendo la selezione di un punto valido
+                        m_nIdSelectedSideWJ = GDB_ID.NULL
+                        m_nIdSelectedWaterJet = GDB_ID.NULL
+                        nIdParentPart = GDB_ID.NULL
+                        OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Bridge intersects part", 3, MSG_TYPE.ERROR_)
+                        Return
+                     End If
+                  End If
+                  ' salvo il valore del PreView evidenziato
+                  EgtSetMark(nIdParentPart)
+                  ' EgtSetMark(nIdWJ)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   Private Sub OnMyMouseDownSceneBridgesDelete(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Acquisisco punto da disegno
+      Dim CurrPoint As New Point3d
+      EgtUnProjectPoint(e.Location, CurrPoint)
+
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sGroupName As String = String.Empty
+         Dim sSelName As String = String.Empty
+         ' gruppo di appartenenza
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del gruppo di appartenenza
+         EgtGetName(nIdParent, sGroupName)
+         ' recupero il nome dell'oggetto selezionato
+         EgtGetName(nIdMy, sSelName)
+         If sGroupName.Contains(NAME_BRIDGES) AndAlso sSelName.Contains(NAME_BRIDGESLINE) Then
+            EgtErase(nIdMy)
+            EgtDraw()
+            ' Ricalcolo tutte le lavorazioni
+            Dim nWarn As Integer = 0
+            ResetAllMachinings(nWarn)
+            Return
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   Private Sub OnMyMouseMoveSceneBridges(ptCurr As Point3d)
+      ptCurr.z = m_ptSrtBridge.z
+      ' rappresento il egmento
+      If m_nIdBridge = GDB_ID.NULL Then
+         m_nIdBridge = EgtCreateLine(m_nIdBridgesGroup, m_ptSrtBridge, ptCurr, GDB_RT.GLOB)
+         ' assegno un nome alla linea
+         EgtSetName(m_nIdBridge, NAME_BRIDGESLINE)
+      End If
+      EgtModifyCurveEndPoint(m_nIdBridge, ptCurr, GDB_RT.GLOB)
+      EgtDraw()
+   End Sub
+
+   Private Function VerifyInterference(nIdBridge As Integer) As Boolean
+      ' prima di procedere alla verifica accorco il segmento (solo per sicurezza) 10 * EPS_SMALL
+      Dim dLen As Double
+      EgtCurveLength(nIdBridge, dLen)
+      If dLen > 21 AndAlso Not EgtCurveIsClosed(nIdBridge) Then
+         EgtTrimCurveEndAtLen(nIdBridge, dLen - 10 * EPS_SMALL)
+         EgtTrimCurveStartAtLen(nIdBridge, 10 * EPS_SMALL)
+      End If
+      ' EgtSaveFile("c:\EgtData\OmagOFFICE\Temp\Bridge.nge", NGE.BIN)
+      Dim nIdPart As Integer = GDB_ID.NULL
+      nIdPart = EgtGetFirstPartInRawPart(GetCurrentRaw())
+      While nIdPart <> GDB_ID.NULL
+         Dim nIdRegion As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_REGION)
+         Dim nIdSurf As Integer = EgtGetFirstInGroup(nIdRegion)
+         While nIdSurf <> GDB_ID.NULL
+            If EgtGetType(nIdSurf) = GDB_TY.SRF_FRGN Then
+               ' se la linea bridge interseca la superficie allora restitusco false
+               If EgtCurveWithRegionClassify(nIdBridge, nIdSurf) <> CREGC.OUT Then
+                  EgtExtendCurveStartByLen(nIdBridge, 10 * EPS_SMALL)
+                  Return False
+               End If
+               Exit While
+            End If
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return True
+   End Function
+
+   Private Function VerifySideIsAcceptable(nMyId As Integer) As Boolean
+      Dim dVal As Double = 0
+      ' verifico che l'entità selezionata non contenga questi parametri
+      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE2, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      If EgtGetInfo(nMyId, INFO_ORIG_SIDE_ANGLE, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      ' altrimenti l'entità è accettabile
+      Return True
+   End Function
+
+   ' verifico che il lato selezionato appartenga ad una lavorazione di tipo Waterjet
+   Private Function IsWaterJetting(nMyId As Integer) As Boolean
+      ' verifico che sul lato indicato sia impostato un taglio di tipo WaterJet
+      Dim nMchId As Integer = GDB_ID.NULL
+      For nInd As Integer = 0 To m_MachiningList.Count() - 1
+         nMchId = m_MachiningList(nInd).m_nId
+         Dim nMachiningType As Integer = EgtGetOperationType(m_MachiningList(nInd).m_nId)
+         If nMachiningType = MCH_MY.WATERJETTING Then
+            EgtSetCurrMachining(nMchId)
+            Dim nIndex As Integer = 0
+            Dim nIdSide As Integer = GDB_ID.NULL
+            Dim nSub As Integer = GDB_ID.NULL
+            While EgtGetMachiningGeometry(nIndex, nIdSide, nSub)
+               If nIdSide = nMyId Then
+                  Return True
+               End If
+               nIndex += 1
+            End While
+         End If
+      Next
+      Return False
+   End Function
+
+   Private Sub RefreshMachList()
+      For nI As Integer = 0 To m_MachiningList.Count() - 1
+         ' cancello tutti gli indici di lavorazione presenti nel disegno
+         Dim nNbrId As Integer = GDB_ID.NULL
+         EgtErase(m_MachiningList(nI).m_nNbrId)
+         EgtRemoveInfo(m_MachiningList(nI).m_nId, "NbrId")
+      Next
+      ' Preparo la lista delle lavorazioni
+      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      ' Aggiorno visualizzazione delle lavorazioni
+      For nI As Integer = 0 To m_MachiningList.Count() - 1
+         ' sistemo colore
+         ColorMachining(m_MachiningList(nI))
+         ' assegno nuova numerazione
+         NumberDirectionMachining(nI)
+         ' conto il numero di tipi di lavorazioni
+         CountMachiningType(m_MachiningList(nI), m_nCountSawing, m_nCountWaterjetting, m_nCountOtherMachining)
+      Next
+      ' aggiorno grafica
+      ShowMachiningList()
+      ' aggiorno la visualizzazione
+      EgtDraw()
+   End Sub
+
+   Private Sub DeselectWJBridgesPart()
+      ' se in fase di definzione di un ponticello lo elimino
+      If m_nIdSelectedSideWJ_Srt <> GDB_ID.NULL And m_nIdSelectedSideWJ_End = GDB_ID.NULL And m_nIdBridge <> GDB_ID.NULL Then
+         EgtErase(EgtGetParent(m_nIdBridge))
+      End If
+      m_nIdBridge = GDB_ID.NULL
+      EgtResetMark(m_nIdSelectedPartWJ_Srt)
+      m_nIdSelectedPartWJ_Srt = GDB_ID.NULL
+      EgtDeselectObj(m_nIdSelectedSideWJ_Srt)
+      m_nIdSelectedSideWJ_Srt = GDB_ID.NULL
+      m_nIdSelectedWaterJet_Srt = GDB_ID.NULL
+      EgtResetMark(m_nIdSelectedPartWJ_End)
+      m_nIdSelectedPartWJ_End = GDB_ID.NULL
+      EgtDeselectObj(m_nIdSelectedSideWJ_End)
+      m_nIdSelectedSideWJ_End = GDB_ID.NULL
+      m_nIdSelectedWaterJet_End = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+#End Region    ' Bridge
+
    Friend Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse OmagOFFICEMap.refMachiningTabVM.IsShow Then Return
@@ -2208,6 +2613,31 @@ Public Class SplitModeVM
          Not OmagOFFICEMap.refSceneHostVM.MainScene.IsStatusNull() Then
          Return
       End If
+
+      ' definizione dei ponticelli
+      If m_BridgeBtn_IsChecked Then
+         If m_nIdSelectedPartWJ_Srt = GDB_ID.NULL Then
+            OnMyMouseDownSceneBridges(sender, e, True, m_nIdSelectedSideWJ_Srt, m_nIdSelectedWaterJet_Srt, m_nIdSelectedPartWJ_Srt)
+         Else
+            OnMyMouseDownSceneBridges(sender, e, False, m_nIdSelectedSideWJ_End, m_nIdSelectedWaterJet_End, m_nIdSelectedPartWJ_End)
+            ' aggiorno la visualizzazione delle lavorazioni e la lista
+            RefreshMachList()
+         End If
+         ' se entrambi i pezzi sono stati definiti allora procedo alla deselezione
+         If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL And m_nIdSelectedPartWJ_End <> GDB_ID.NULL Then
+            DeselectWJBridgesPart()
+         End If
+         Return
+      End If
+
+      ' eliminazione dei ponticelli
+      If m_BridgeDeleteBtn_IsChecked Then
+         OnMyMouseDownSceneBridgesDelete(sender, e)
+         ' aggiorno la visualizzazione delle lavorazioni e la lista
+         RefreshMachList()
+         Return
+      End If
+
       ' Reset drag
       m_nDragInd = -1
       m_nDragType = 0
@@ -2296,13 +2726,22 @@ Public Class SplitModeVM
    Friend Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse OmagOFFICEMap.refMachiningTabVM.IsShow Then Return
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+
+      ' definizione dei ponticelli
+      If m_BridgeBtn_IsChecked Then
+         If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL Then
+            OnMyMouseMoveSceneBridges(ptCurr)
+         End If
+         Return
+      End If
+
       ' Se drag non abilitato o in corso
       If m_nDragInd = -1L Or m_bDragging Then Return
       m_bDragging = True
       Dim nOperId As Integer = m_MachiningList(m_nDragInd).m_nId
-      ' Ricavo il punto corrente in coordinate mondo
-      Dim ptCurr As Point3d
-      EgtUnProjectPoint(e.Location, ptCurr)
       ' Ricavo il vettore di movimento e la variazione di lunghezza
       Dim vtMove As Vector3d = ptCurr - m_ptDragPrev
       Dim dDelta = vtMove * m_MachiningList(m_nDragInd).m_vtDir
@@ -2391,6 +2830,12 @@ Public Class SplitModeVM
       End If
    End Sub
 
+   Friend Sub OnKeyDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs)
+      ' Con CANC cancello i pezzi selezionati
+      If (e.KeyData = System.Windows.Forms.Keys.Delete Or e.KeyData = System.Windows.Forms.Keys.Escape) And (m_BridgeBtn_IsChecked Or m_BridgeDeleteBtn_IsChecked) Then
+         DeselectWJBridgesPart()
+      End If
+   End Sub
 #End Region    ' EVENTS
 
    '-----------------------------------------------------------------------------------------------

OptionPanel/NestingTab/NestingTabVM.vb

@@ -31,6 +31,13 @@ Public Class NestingTabVM
    Private m_ptPrev As Point3d
    Private m_vtTotMove As Vector3d
    Private m_dSnapDist As Double = 0
+   ' Gestione rotazione pezzi in fase di Drag
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False
    ' Abilitazioni TrfData e CsvData
    Private m_bTrfData As Boolean = False
    Private m_bCsvData As Boolean = False
@@ -151,7 +158,7 @@ Public Class NestingTabVM
       End Get
       Set(value As Visibility)
          m_CsvData_Visibility = value
-         NotifyPropertyChanged( "CsvData_Visibility")
+         NotifyPropertyChanged("CsvData_Visibility")
       End Set
    End Property
 
@@ -270,7 +277,7 @@ Public Class NestingTabVM
 
    Friend Function InitNesting() As Boolean
       ' Se previsto, abilito bottone VeinMatching
-      If Not IsNothing( OmagOFFICEMap.refMainWindowVM.VeinMatchingWnd) Then
+      If Not IsNothing(OmagOFFICEMap.refMainWindowVM.VeinMatchingWnd) Then
          OmagOFFICEMap.refVeinMatchPanelVM.VeinMatchIsEnabled = True
       End If
       ' Abilitazione TrfData
@@ -280,7 +287,7 @@ Public Class NestingTabVM
       m_bCsvData = Not m_bTrfData And
                    (GetMainPrivateProfileInt(S_COMPO, K_CSVDATA, 0) <> 0)
       ' Se previsto, abilito bottone CsvData
-      CsvData_Visibility = If( m_bCsvData, Visibility.Visible, Visibility.Collapsed)
+      CsvData_Visibility = If(m_bCsvData, Visibility.Visible, Visibility.Collapsed)
       ' Imposto il corretto contesto
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' aggiorno dati del grezzo
@@ -358,7 +365,7 @@ Public Class NestingTabVM
 
    Private Sub AutomaticInsert()
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
-      OmagOFFICEMap.refStatusBarVM.SetOutputMessage( EgtMsg( 90340))       ' Nesting Automatico in corso
+      OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(90340))       ' Nesting Automatico in corso
       Dim bWrongTrf As Boolean = False
       Dim vParts As New List(Of Integer)
       ' Ciclo di pre-inserimento in tavola dei pezzi selezionati
@@ -376,7 +383,7 @@ Public Class NestingTabVM
          End If
          ' Lo preparo in tavola, se possibile
          If PreInsertOnePart(nId) Then
-            vParts.Add( nId)
+            vParts.Add(nId)
          Else
             EgtSetStatus(nId, GDB_ST.ON_)
             VeinMatching.OnDeselectPart(nId)
@@ -391,12 +398,12 @@ Public Class NestingTabVM
       Dim bAligned As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_NEST_ALIGNED, 0, CurrentMachine.sMachIniFile) <> 0)
       EnableReferenceRegion(bAligned)
       ' Eseguo nesting automatico
-      Dim bOpimizeOnX As Boolean = ( GetMainPrivateProfileInt( S_NEST, K_AUTOMATICOPTIMIZE, 2) = 1)
+      Dim bOpimizeOnX As Boolean = (GetMainPrivateProfileInt(S_NEST, K_AUTOMATICOPTIMIZE, 2) = 1)
       Dim bGuillotineMode As Boolean = bAligned
-      Dim nAutomaticMaxTime As Integer = GetMainPrivateProfileInt( S_NEST, K_AUTOMATICMAXTIME, 20)
+      Dim nAutomaticMaxTime As Integer = GetMainPrivateProfileInt(S_NEST, K_AUTOMATICMAXTIME, 20)
-      Dim dPartTime As Double = If( bGuillotineMode, 1.0, 0.5)
+      Dim dPartTime As Double = If(bGuillotineMode, 1.0, 0.5)
-      Dim nMaxTime As Integer = Math.Min( CInt( 2 + dPartTime * vParts.Count()), nAutomaticMaxTime)
+      Dim nMaxTime As Integer = Math.Min(CInt(2 + dPartTime * vParts.Count()), nAutomaticMaxTime)
-      EgtAutomaticPackParts( vParts, bOpimizeOnX, CurrentMachine.bReducedCut, bGuillotineMode, nMaxTime)
+      EgtAutomaticPackParts(vParts, bOpimizeOnX, CurrentMachine.bReducedCut, bGuillotineMode, nMaxTime)
       ' Sistemo i pezzi
       For Each nPartId As Integer In vParts
          ' se pezzo inserito
@@ -404,11 +411,11 @@ Public Class NestingTabVM
             VeinMatching.OnInsertPartInRaw(nPartId)
             ' Eventuale aggiunta solido per taglio da sotto
             UpdateSolidForDrip(nPartId)
-         ' altrimenti rifiutato
+            ' altrimenti rifiutato
-         else
+         Else
             ' Ripristino lo stato originale
-            PreRemoveOnePart( Math.Abs( nPartId))
+            PreRemoveOnePart(Math.Abs(nPartId))
-            VeinMatching.OnDeselectPart( Math.Abs( nPartId))
+            VeinMatching.OnDeselectPart(Math.Abs(nPartId))
          End If
       Next
       ' Aggiorno flag selezionati
@@ -423,6 +430,93 @@ Public Class NestingTabVM
       End If
    End Sub
 
+   Private Sub VerifyMove()
+      If m_bVerify Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Eseguo verifica
+         If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, CurrentMachine.bReducedCut) Then
+            EstCalc.ResetOrderMachiningFlag()
+            ' Non superata riporto alla posizione iniziale
+         Else
+            If m_bFromParking Then
+               OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               PreRemoveOnePart(nMoveId)
+               VeinMatching.OnRemovePartFromRaw(nMoveId)
+            Else
+               EgtMove(nMoveId, -m_vtTotMove)
+               ' Eventuale notifica al VeinMatching
+               If nMoveId = GDB_ID.SEL Then
+                  Dim nId As Integer = EgtGetFirstSelectedObj()
+                  While nId <> GDB_ID.NULL
+                     VeinMatching.OnMovePartInRaw(nId)
+                     nId = EgtGetNextSelectedObj()
+                  End While
+               Else
+                  VeinMatching.OnMovePartInRaw(nMoveId)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+            ' solo se pezzo disposto in tavola
+            If m_bFromParking Then
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+         End If
+         m_bFromParking = False
+      End If
+   End Sub
+
+   Private Sub VerifyRot()
+      ' se comando Shift è stato attivato
+      If m_bKeyLeftShiftPressed Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         If Not EgtVerifyPart(nMoveId, CurrentMachine.bReducedCut) Then
+            Dim ptCen As Point3d
+            If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+            EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), -m_dAngTotal, GDB_RT.GLOB)
+         End If
+      End If
+      ' resetto i valori 
+      m_dStartAng = 0
+      m_dAngTotal = 0
+      m_bStartRot = False
+   End Sub
+
+   ' verifica che la rotazione sia ammessa
+   Private Function RotatePartInsideBond(dAngRotDeg As Double, nIdMove As Integer) As Boolean
+      ' Verifico se ci sono dei pezzi bloccati in rotazione
+      Dim bLockedRot As Boolean = GetLockOnRotation(nIdMove)
+      ' Se tutti i pezzi possono ruotare
+      If Not bLockedRot Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nIdMove, ptCen) Then Return False
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Verifico rotazione complessiva
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
+         If EgtVerifyPart(nIdMove, CurrentMachine.bReducedCut) Then Return True
+         ' Provo rotazione parziale (dopo aver annullato la complessiva)
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
+         Return EgtRotatePart(nIdMove, CurrentMachine.bReducedCut, ptCen, dAngRotDeg)
+      Else
+         Return False
+      End If
+   End Function
+
    Private Function RotateCluster(ByVal dAngRotDeg As Double) As Boolean
       ' Se non ci sono pezzi selezionati, esco
       If EgtGetSelectedObjCount() = 0 Then Return True
@@ -432,7 +526,7 @@ Public Class NestingTabVM
          Dim nId As Integer = EgtGetFirstSelectedObj()
          While nId <> GDB_ID.NULL
             ' Se pezzo con rotazione libera
-            If Not EgtExistsInfo( nId, INFO_PARTROT) Then
+            If Not EgtExistsInfo(nId, INFO_PARTROT) Then
                ' Calcolo il centro di rotazione come centro del pezzo
                Dim ptCen As Point3d
                If Not EgtGetPartPartClusterCenterGlob(nId, ptCen) Then Return False
@@ -466,40 +560,22 @@ Public Class NestingTabVM
             nId = EgtGetNextSelectedObj()
          End While
          Return True
-      ' Altrimenti li ruoto tenendo conto delle collisioni
+         ' Altrimenti li ruoto tenendo conto delle collisioni
       Else
-         ' Verifico se ci sono dei pezzi bloccati in rotazione
+         Return RotatePartInsideBond(dAngRotDeg, GDB_ID.SEL)
-         Dim bLockedRot As Boolean = GetLockOnRotation( GDB_ID.SEL)
-            ' Se tutti i pezzi possono ruotare
-            If Not bLockedRot Then
-            ' Calcolo il centro di rotazione come centro del cluster
-            Dim ptCen As Point3d
-            If Not EgtGetPartPartClusterCenterGlob(GDB_ID.SEL, ptCen) Then Return False
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Verifico rotazione complessiva
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-            If EgtVerifyPart(GDB_ID.SEL, CurrentMachine.bReducedCut) Then Return True
-            ' Provo rotazione parziale (dopo aver annullato la complessiva)
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
-            Return EgtRotatePart(GDB_ID.SEL, CurrentMachine.bReducedCut, ptCen, dAngRotDeg)
-         Else
-            Return False
-         End If
       End If
    End Function
 
-   Private Function GetLockOnRotation( nPartId As Integer) As Boolean
+   Private Function GetLockOnRotation(nPartId As Integer) As Boolean
       ' Se singolo pezzo
       If nPartId <> GDB_ID.SEL Then
-         Return EgtExistsInfo( nPartId, INFO_PARTROT)
+         Return EgtExistsInfo(nPartId, INFO_PARTROT)
-      ' Altrimenti tutti i selezionati
+         ' Altrimenti tutti i selezionati
       Else
          Dim bLockedRot As Boolean = False
          Dim nId As Integer = EgtGetFirstSelectedObj()
          While nId <> GDB_ID.NULL
-            If EgtExistsInfo( nId, INFO_PARTROT) Then
+            If EgtExistsInfo(nId, INFO_PARTROT) Then
                bLockedRot = True
                Exit While
             End If
@@ -564,13 +640,13 @@ Public Class NestingTabVM
       Return True
    End Function
 
-   Friend Function ExitNesting( bChange As Boolean) As Boolean
+   Friend Function ExitNesting(bChange As Boolean) As Boolean
       If m_CsvImport_IsChecked Then
          m_CsvImportWindow.Close()
          m_CsvImportWindow = Nothing
       End If
       If bChange Then
-         OmagOFFICEMap.refVeinMatchPanelVM.SetVeinMatchIsChecked( False)
+         OmagOFFICEMap.refVeinMatchPanelVM.SetVeinMatchIsChecked(False)
          OmagOFFICEMap.refVeinMatchPanelVM.VeinMatchIsEnabled = False
       End If
       Return True
@@ -1343,20 +1419,20 @@ Public Class NestingTabVM
       Dim nId As Integer = EgtGetFirstSelectedObj()
       While nId <> GDB_ID.NULL
          ' Se rotazione bloccata, tolgo blocco e aggiorno info
-         If EgtExistsInfo( nId, INFO_PARTROT) Then
+         If EgtExistsInfo(nId, INFO_PARTROT) Then
             ' Rimuovo flag di rotazione bloccata
-            EgtRemoveInfo( nId, INFO_PARTROT)
+            EgtRemoveInfo(nId, INFO_PARTROT)
             ' Tolgo da info sul pezzo Codice
-            Dim nTextId As Integer = EgtGetFirstInGroup( EgtGetFirstNameInGroup( nId, NAME_REGION))
+            Dim nTextId As Integer = EgtGetFirstInGroup(EgtGetFirstNameInGroup(nId, NAME_REGION))
             While nTextId <> GDB_ID.NULL
-               If EgtGetType( nTextId) = GDB_TY.EXT_TEXT Then
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
                   Dim sText As String = ""
-                  EgtTextGetContent( nTextId, sText)
+                  EgtTextGetContent(nTextId, sText)
-                  sText = sText.Replace( "<br/>(X)", "")
+                  sText = sText.Replace("<br/>(X)", "")
-                  EgtModifyText( nTextId, sText)
+                  EgtModifyText(nTextId, sText)
                   Exit While
                End If
-               nTextId = EgtGetNext( nTextId)
+               nTextId = EgtGetNext(nTextId)
             End While
          End If
          ' Passo al successivo selezionato
@@ -1387,20 +1463,20 @@ Public Class NestingTabVM
       Dim nId As Integer = EgtGetFirstSelectedObj()
       While nId <> GDB_ID.NULL
          ' Se rotazione libera, applico blocco e aggiorno info
-         If Not EgtExistsInfo( nId, INFO_PARTROT) Then
+         If Not EgtExistsInfo(nId, INFO_PARTROT) Then
             ' Imposto flag di rotazione bloccata
-            EgtSetInfo( nId, INFO_PARTROT, 0)
+            EgtSetInfo(nId, INFO_PARTROT, 0)
             ' Inserisco in info sul pezzo Codice
-            Dim nTextId As Integer = EgtGetFirstInGroup( EgtGetFirstNameInGroup( nId, NAME_REGION))
+            Dim nTextId As Integer = EgtGetFirstInGroup(EgtGetFirstNameInGroup(nId, NAME_REGION))
             While nTextId <> GDB_ID.NULL
-               If EgtGetType( nTextId) = GDB_TY.EXT_TEXT Then
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
                   Dim sText As String = ""
-                  EgtTextGetContent( nTextId, sText)
+                  EgtTextGetContent(nTextId, sText)
                   sText &= "<br/>(X)"
-                  EgtModifyText( nTextId, sText)
+                  EgtModifyText(nTextId, sText)
                   Exit While
                End If
-               nTextId = EgtGetNext( nTextId)
+               nTextId = EgtGetNext(nTextId)
             End While
          End If
          ' Passo al successivo selezionato
@@ -1436,7 +1512,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1480,7 +1556,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1524,7 +1600,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1568,7 +1644,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1656,7 +1732,7 @@ Public Class NestingTabVM
       If CurrentMachine.bAutomatic And
          OmagOFFICEMap.refMainWindowVM.MainWindowM.AutoNestOption() Then
          AutomaticInsert()
-      ' altrimenti inserimento standard
+         ' altrimenti inserimento standard
       Else
          StandardInsert()
       End If
@@ -1744,6 +1820,10 @@ Public Class NestingTabVM
       ' Ciclo di cancellazione dei pezzi selezionati
       nId = EgtGetFirstSelectedObj()
       While nId <> GDB_ID.NULL
+         '' elimino eventuali ponticelli associati al pezzo: non è gestito il movimento del pezzo
+         'DeleteBridgeAssociated(nId)
+         ' se è stato eseguito il Drag allora cancello tutti i ponticelli
+         ResetAllBridges()
          ' Recupero indice del successivo
          Dim nNextId = EgtGetNextSelectedObj()
          ' Se abilitata cancellazione in ogni caso o pezzo non da Csv
@@ -1785,6 +1865,47 @@ Public Class NestingTabVM
       VeinMatching.Draw()
    End Sub
 
+   Private Sub DeleteBridgeAssociated(nMyId As Integer)
+      ' verifico se esistono dei ponticelli associati al pezzo indicato
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = NAME_BRIDGES
+      Dim nIdBridgesGroup As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nIdBridgesGroup <> GDB_ID.NULL Then
+         ' carico la prima entità del gruppo BRIDGES
+         Dim nIdBridgeLine As Integer = GDB_ID.NULL
+         nIdBridgeLine = EgtGetFirstNameInGroup(nIdBridgesGroup, NAME_BRIDGESLINE)
+         ' ciclo su tutte le entità
+         While nIdBridgeLine <> GDB_ID.NULL
+            Dim nNextBridgeLine As Integer = GDB_ID.NULL
+            Dim nIdPart As Integer = GDB_ID.NULL
+            If EgtGetInfo(nIdBridgeLine, "PartStart", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            If EgtGetInfo(nIdBridgeLine, "PartEnd", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            ' il BridgeLine corrente non contiene riferimeti al pezzo da eliminare
+            nIdBridgeLine = EgtGetNext(nIdBridgeLine)
+         End While
+      End If
+   End Sub
+
 #End Region ' RemovePartCommand
 
 #Region "SelectAllCommand"
@@ -1871,6 +1992,8 @@ Public Class NestingTabVM
       ResetAllSplitCurv()
       ' cancello tutti i punti di inizio (Waterjet)
       ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBridges()
       ' Cancello tutte le lavorazioni
       CamAuto.EraseMachinings(GDB_ID.NULL)
       ' Reinserisco tutte le lavorazioni piane
@@ -1902,44 +2025,44 @@ Public Class NestingTabVM
       ' Deseleziono eventuali altri
       If EgtGetNextSelectedObj() <> GDB_ID.NULL Then
          EgtDeselectAll()
-         EgtSelectObj( nPartId)
+         EgtSelectObj(nPartId)
          EgtDraw()
       End If
       ' Recupero dati del pezzo
-      Dim sCsvOrder As String = "" : EgtGetInfo( nPartId, INFO_CSV_ORD, sCsvOrder)
+      Dim sCsvOrder As String = "" : EgtGetInfo(nPartId, INFO_CSV_ORD, sCsvOrder)
-      Dim sCsvList As String = "" : EgtGetInfo( nPartId, INFO_CSV_DIST, sCsvList)
+      Dim sCsvList As String = "" : EgtGetInfo(nPartId, INFO_CSV_DIST, sCsvList)
-      Dim sCsvName As String = "" : EgtGetInfo( nPartId, INFO_CSV_PART, sCsvName)
+      Dim sCsvName As String = "" : EgtGetInfo(nPartId, INFO_CSV_PART, sCsvName)
       ' Avvio dialogo modifica
       Dim DlgCsvDataVM As New CompoCsvDataWindowVM()
       Dim DlgCsvDataV As New CompoCsvDataWindowV(Application.Current.MainWindow, DlgCsvDataVM)
-      DlgCsvDataVM.SetData( sCsvOrder, sCsvList, sCsvName)
+      DlgCsvDataVM.SetData(sCsvOrder, sCsvList, sCsvName)
       If DlgCsvDataV.ShowDialog() Then
          ' Recupero i nuovi dati
          Dim sNewOrder As String = ""
          Dim sNewList As String = ""
          Dim sNewName As String = ""
-         DlgCsvDataVM.GetData( sNewOrder, sNewList, sNewName)
+         DlgCsvDataVM.GetData(sNewOrder, sNewList, sNewName)
          ' Assegno i nuovi dati
-         EgtSetInfo( nPartId, INFO_CSV_ORD, sNewOrder)
+         EgtSetInfo(nPartId, INFO_CSV_ORD, sNewOrder)
-         EgtSetInfo( nPartId, INFO_CSV_DIST, sNewList)
+         EgtSetInfo(nPartId, INFO_CSV_DIST, sNewList)
-         EgtSetInfo( nPartId, INFO_CSV_PART, sNewName)
+         EgtSetInfo(nPartId, INFO_CSV_PART, sNewName)
          ' Se necessario, modifico la scritta
          If sNewName <> sCsvName Then
-            Dim nRegLayId As Integer = EgtGetFirstNameInGroup( nPartId, NAME_REGION)
+            Dim nRegLayId As Integer = EgtGetFirstNameInGroup(nPartId, NAME_REGION)
             Dim nTextId = EgtGetFirstInGroup(nRegLayId)
             While nTextId <> GDB_ID.NULL
-               If EgtGetType( nTextId) = GDB_TY.EXT_TEXT Then
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
                   Dim sText As String = String.Empty
-                  EgtTextGetContent( nTextId, sText)
+                  EgtTextGetContent(nTextId, sText)
-                  Dim nPos As Integer = sText.IndexOf( sCsvName)
+                  Dim nPos As Integer = sText.IndexOf(sCsvName)
                   Dim sNewText As String
-                  If nPos <0 Then
+                  If nPos < 0 Then
-                     sNewText= sNewName & "<br/>" & sText
+                     sNewText = sNewName & "<br/>" & sText
                   Else
-                     sNewText = sText.Remove( nPos, sCsvName.Length()).Insert( nPos, sNewName)
+                     sNewText = sText.Remove(nPos, sCsvName.Length()).Insert(nPos, sNewName)
                   End If
-                  EgtModifyText( nTextId, sNewText)
+                  EgtModifyText(nTextId, sNewText)
-                  VeinMatching.ModifyPartText( nPartId, sNewText)
+                  VeinMatching.ModifyPartText(nPartId, sNewText)
                   Exit While
                End If
                nTextId = EgtGetNext(nTextId)
@@ -2034,6 +2157,7 @@ Public Class NestingTabVM
       m_bDrag = m_bDrag AndAlso EgtUnProjectPoint(e.Location, m_ptPrev)
       m_bDragToStart = m_bDrag
       m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+      m_bKeyLeftShiftPressed = m_bVerify
       m_vtTotMove = Vector3d.NULL()
    End Sub
 
@@ -2042,7 +2166,7 @@ Public Class NestingTabVM
       If Not m_bDrag Or m_bDragging Then Return
       ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
       If m_bDragToStart Then
-         If Math.Abs(e.Location.X - m_locPrev.X) <m_nRestRadius And
+         If Math.Abs(e.Location.X - m_locPrev.X) < m_nRestRadius And
             Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
             Return
          End If
@@ -2068,12 +2192,12 @@ Public Class NestingTabVM
             OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_NESTPAGEUC + 7), MSG_TYPE.WARNING)
          End If
          ' Applico le lavorazioni al pezzo
-         Dim b3Curr As new BBox3d
+         Dim b3Curr As New BBox3d
-         EgtGetBBoxGlob( EgtGetFirstNameInGroup(nTestId,  NAME_REGION), BBFLAG, b3Curr)
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(nTestId, NAME_REGION), BBFLAG, b3Curr)
-         if Not EstCalc.PreInsertOnePart( nTestId) Then Return
+         If Not EstCalc.PreInsertOnePart(nTestId) Then Return
-         Dim b3Ins As new BBox3d
+         Dim b3Ins As New BBox3d
-         EgtGetBBoxGlob( EgtGetFirstNameInGroup( nTestId, NAME_REGION), BBFLAG, b3Ins)
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(nTestId, NAME_REGION), BBFLAG, b3Ins)
-         Dim vtDiff As new Vector3d( b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
+         Dim vtDiff As New Vector3d(b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
          EgtMove(nMoveId, vtDiff)
 
          '---------------------- COUNTER PART ----------------------
@@ -2089,7 +2213,7 @@ Public Class NestingTabVM
          '---------------------- COUNTER PART ----------------------
 
          ' Gestione VeinMatching
-         VeinMatching.OnInsertPartInRaw( nMoveId)
+         VeinMatching.OnInsertPartInRaw(nMoveId)
          ' Imposto stato
          m_bVerify = True
          m_bFromParking = True
@@ -2099,46 +2223,108 @@ Public Class NestingTabVM
       ' Ricavo il punto corrente in coordinate mondo
       Dim ptCurr As Point3d
       EgtUnProjectPoint(e.Location, ptCurr)
-      ' Ricavo il vettore di movimento
+
-      Dim vtMove As Vector3d = ptCurr - m_ptPrev
+      ' la rotazione è attivabile solo se premuto il tasto Ctrl (e non sono in parheggio)
-      ' Muovo i pezzi selezionati di quanto possibile
+      m_bKeyCtrlPressed = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Control) > 0
-      If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
+
-         ' Se movimento con sola verifica finale
+      '-------------Inizio ROTAZIONE ----------------
-         If m_bVerify Then
+      If m_bKeyCtrlPressed AndAlso (Not m_bFromParking OrElse m_bKeyLeftShiftPressed) Then
-            EgtMove(nMoveId, vtMove)
+         ' Calcolo il centro di rotazione come centro del cluster
-            m_vtTotMove += vtMove
+         Dim ptCen As Point3d
-         ' altrimenti caso con verifica durante il movimento
+         If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
-         Else
+         ' definisco il vettore dal centro del pezzo alla posizione del cursore
-            ' Aggiorno regioni per nesting
+         Dim vtCurr As Vector3d = ptCurr - ptCen
-            UpdateNestRegions()
+         Dim dLen, dHAng, dVAng As Double
-            EnableReferenceRegion(False)
+         ' recupero l'angolo orizzontale del vettore
-            ' muovo il pezzo
+         vtCurr.ToSpherical(dLen, dHAng, dVAng)
-            EgtMovePart(nMoveId, CurrentMachine.bReducedCut, vtMove)
+         If Not m_bStartRot Then
-            EgtSaveCollInfo()
+            m_dAngTotal = 0
-            ' se movimento risultante nullo, provo con movimento tangente
+            ' notifico una rotazione
-            Dim bTgMoved As Boolean = False
+            m_bStartRot = True
-            If vtMove.IsSmall() Then
+            m_dStartAng = dVAng
-               ' riprovo con movimento tangente
-               Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
-               EgtTgMovePartOnCollision(nMoveId, CurrentMachine.bReducedCut, vtTgMove)
-               bTgMoved = (Not vtTgMove.IsSmall())
-            End If
-            ' se abilitato magnetico (allineamento + snap), lo provo
-            Dim bAlignMoved As Boolean = False
-            Dim bSnapMoved As Boolean = False
-            If m_bMagnetic Then
-               If Not GetLockOnRotation( nMoveId) Then
-                  EgtAlignPartOnCollision(nMoveId, CurrentMachine.bReducedCut, bAlignMoved)
-               End If
-               If m_dSnapDist > EPS_SMALL Then
-                  EgtRestoreCollInfo()
-                  EgtMovePartToSnapPointOnCollision(nMoveId, CurrentMachine.bReducedCut, m_dSnapDist, bSnapMoved)
-               End If
-            End If
-            EstCalc.ResetOrderMachiningFlag()
          End If
-         EgtDraw()
+         Dim dDeltaAng As Double = dVAng - m_dStartAng
-         ' Eventuale notifica al VeinMatching
+         ' gestione del passaggio da 0° → 360° evitando mantenendo la visualizzazione fluida
+         If Math.Abs(dDeltaAng) > 90 Then
+            If m_dStartAng < 180 And dVAng > 180 Then
+               dDeltaAng = dVAng - 360 - m_dStartAng
+            ElseIf m_dStartAng > 180 And dVAng < 180 Then
+               dDeltaAng = dVAng - m_dStartAng + 360
+            End If
+         End If
+         ' Rotazione del pezzo attorno al suo centro
+         If Math.Abs(dDeltaAng) > EPS_ANG_SMALL Then
+            ' se il tasto Shift è premuto (disabilitato il controllo collisioni durante il Drag) 
+            If m_bKeyLeftShiftPressed Then
+               EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), dDeltaAng, GDB_RT.GLOB)
+               m_dAngTotal += dDeltaAng
+            Else
+               ' esegue la rotazione fino ad incontrare un altro pezzo
+               RotatePartInsideBond(dDeltaAng, nMoveId)
+               EstCalc.ResetOrderMachiningFlag()
+               ' Eventuale notifica al VeinMatching
+               Dim nId As Integer = EgtGetFirstSelectedObj()
+               While nId <> GDB_ID.NULL
+                  VeinMatching.OnMovePartInRaw(nId)
+                  nId = EgtGetNextSelectedObj()
+               End While
+            End If
+            m_dStartAng = dVAng
+         End If
+         '-------------Fine ROTAZIONE ----------------
+
+      Else
+         ' -------------Inizio TRASLAZIONE ---------------
+         ' Ricavo il vettore di movimento
+         Dim vtMove As Vector3d = ptCurr - m_ptPrev
+         ' Muovo i pezzi selezionati di quanto possibile
+         If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
+            ' notifico una traslazione
+            If Not m_bStartMove Then
+               m_bStartMove = True
+            End If
+
+            ' Se movimento con sola verifica finale (disabilitato il controllo collisioni durante il Drag)
+            If m_bVerify Then
+               EgtMove(nMoveId, vtMove)
+               m_vtTotMove += vtMove
+               ' altrimenti caso con verifica durante il movimento
+            Else
+               ' Aggiorno regioni per nesting
+               UpdateNestRegions()
+               EnableReferenceRegion(False)
+               ' muovo il pezzo
+               EgtMovePart(nMoveId, CurrentMachine.bReducedCut, vtMove)
+               EgtSaveCollInfo()
+               ' se movimento risultante nullo, provo con movimento tangente
+               Dim bTgMoved As Boolean = False
+               If vtMove.IsSmall() Then
+                  ' riprovo con movimento tangente
+                  Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
+                  EgtTgMovePartOnCollision(nMoveId, CurrentMachine.bReducedCut, vtTgMove)
+                  bTgMoved = (Not vtTgMove.IsSmall())
+               End If
+               ' se abilitato magnetico (allineamento + snap), lo provo
+               Dim bAlignMoved As Boolean = False
+               Dim bSnapMoved As Boolean = False
+               If m_bMagnetic Then
+                  If Not GetLockOnRotation(nMoveId) Then
+                     EgtAlignPartOnCollision(nMoveId, CurrentMachine.bReducedCut, bAlignMoved)
+                  End If
+                  If m_dSnapDist > EPS_SMALL Then
+                     EgtRestoreCollInfo()
+                     EgtMovePartToSnapPointOnCollision(nMoveId, CurrentMachine.bReducedCut, m_dSnapDist, bSnapMoved)
+                  End If
+               End If
+               EstCalc.ResetOrderMachiningFlag()
+            End If
+            ' -------------Fine TRASLAZIONE ---------------
+         End If
+      End If
+
+      EgtDraw()
+      ' Eventuale notifica al VeinMatching
+      If m_bStartMove OrElse m_bStartRot Then
          If nMoveId = GDB_ID.SEL Then
             Dim nId As Integer = EgtGetFirstSelectedObj()
             While nId <> GDB_ID.NULL
@@ -2153,6 +2339,10 @@ Public Class NestingTabVM
       m_ptPrev = ptCurr
       ' Terminata esecuzione di drag
       m_bDragging = False
+      ' se è stato eseguito il Drag allora cancello tutti i ponticelli
+      ResetAllBridges()
+      ' non è gestito il movimento della lavorazione!
+      'DeleteBridgeAssociated(nMoveId)
    End Sub
 
    Friend Sub OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
@@ -2174,48 +2364,31 @@ Public Class NestingTabVM
 
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se movimento con sola verifica finale
+         ' Se movimento con sola verifica finale ----- TRASLAZIONE
-         If m_bVerify Then
+         If Not m_bStartRot And m_bStartMove Then
-            ' Determino cosa verificare
+            VerifyMove()
-            Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+            ' Se movimento con sola verifica finale ----- TRASLAZIONE + ROTAZIONE
-            ' Aggiorno regioni per nesting
+         ElseIf m_bStartRot And m_bStartMove Then
-            UpdateNestRegions()
+            If Not m_bFromParking Then
-            EnableReferenceRegion(False)
+               VerifyRot()
-            ' Eseguo verifica
-            If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, CurrentMachine.bReducedCut) Then
-               EstCalc.ResetOrderMachiningFlag()
-               ' Non superata riporto alla posizione iniziale
             Else
-               If m_bFromParking Then
+               ' forzo il reset delle info di rotazione
-                  OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               m_dStartAng = 0
-                  PreRemoveOnePart(nMoveId)
+               m_dAngTotal = 0
-                  VeinMatching.OnRemovePartFromRaw(nMoveId)
+               m_bStartRot = False
-               Else
+            End If
-                  EgtMove(nMoveId, -m_vtTotMove)
+            VerifyMove()
-                  ' Eventuale notifica al VeinMatching
+            ' verifico se la posizione finale della rotazione è corretta ----- ROTAZIONE
-                  If nMoveId = GDB_ID.SEL Then
+         ElseIf m_bStartRot And Not m_bStartMove Then
-                     Dim nId As Integer = EgtGetFirstSelectedObj()
+            If m_bFromParking Then
-                     While nId <> GDB_ID.NULL
+               VerifyMove()
-                        VeinMatching.OnMovePartInRaw(nId)
+               ' forzo il reset delle info di rotazione
-                        nId = EgtGetNextSelectedObj()
+               m_dStartAng = 0
-                     End While
+               m_dAngTotal = 0
-                  Else
+               m_bStartRot = False
-                     VeinMatching.OnMovePartInRaw(nMoveId)
+            Else
-                  End If
+               VerifyRot()
-               End If
-               '---------------------- COUNTER PART ----------------------
-               Dim sRefGroup As String = String.Empty
-               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
-                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
-                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
-                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
-                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
-                  CountPartInFamily(sRefGroup)
-               End If
-               '---------------------- COUNTER PART ----------------------
             End If
-            m_bFromParking = False
-            ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
          End If
@@ -2269,7 +2442,7 @@ Public Class NestingTabVM
       ' Con CANC cancello i pezzi selezionati
       If e.KeyData = System.Windows.Forms.Keys.Delete Then
          RemovePart()
-      ' Con INS eseguo inserimento dei pezzi selezionati in VeinMatching
+         ' Con INS eseguo inserimento dei pezzi selezionati in VeinMatching
       ElseIf e.KeyData = System.Windows.Forms.Keys.Insert Then
          ' Vettore dei pezzi selezionati (l'inserimento di un pezzo in VM cancella la selezione)
          Dim vSel As New List(Of Integer)

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -1145,14 +1145,14 @@ Public Class RawPartTabVM
          dRawWidth = m_dTableWidth - 2 * dRawKerf
       End If
       If dRawOffsX < dRawKerf Then dRawOffsX = dRawKerf
-      If dRawOffsX + dRawLen + dRawKerf > m_dTableLength Then
+      If dRawOffsX + dRawLen + 2 * dRawKerf > m_dTableLength Then
-         dRawOffsX = Math.Max(dRawKerf, m_dTableLength - dRawLen - dRawKerf)
+         dRawOffsX = Math.Max(dRawKerf, m_dTableLength - dRawLen - 2 * dRawKerf)
-         dRawLen = Math.Min(dRawLen, m_dTableLength - dRawOffsX - dRawKerf)
+         dRawLen = Math.Min(dRawLen, m_dTableLength - dRawOffsX - 2 * dRawKerf)
       End If
       If dRawOffsY < dRawKerf Then dRawOffsY = dRawKerf
-      If dRawOffsY + dRawWidth + dRawKerf > m_dTableWidth Then
+      If dRawOffsY + dRawWidth + 2 * dRawKerf > m_dTableWidth Then
-         dRawOffsY = Math.Max(dRawKerf, m_dTableWidth - dRawWidth - dRawKerf)
+         dRawOffsY = Math.Max(dRawKerf, m_dTableWidth - dRawWidth - 2 * dRawKerf)
-         dRawWidth = Math.Min(dRawWidth, m_dTableWidth - dRawOffsY - dRawKerf)
+         dRawWidth = Math.Min(dRawWidth, m_dTableWidth - dRawOffsY - 2 * dRawKerf)
       End If
       ' Assegno i dati
       SetLength(dRawLen)
@@ -2389,6 +2389,8 @@ Public Class RawPartTabVM
       End If
       ' Aggiorno il punto precedente
       m_ptPrev = ptCurr
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBridges()
    End Sub
 
    Private Sub ModifyPhoto(ptCurr As Point3d)

Project/ProjectV.xaml

@@ -14,6 +14,7 @@
       <OmagOFFICE:ShowPanelV DataContext="{StaticResource ShowPanelVM}"/>
       <OmagOFFICE:ViewPanelV DataContext="{StaticResource ViewPanelVM}"/>
       <OmagOFFICE:InstrumentPanelV DataContext="{StaticResource InstrumentPanelVM}"/>
+      <OmagOFFICE:PrintPanelV DataContext="{StaticResource PrintPanelVM}"/>
       <OmagOFFICE:VeinMatchPanelV DataContext="{StaticResource VeinMatchPanelVM}"/>
       <OmagOFFICE:MachinePanelV DataContext="{StaticResource MachinePanelVM}"/>
    </EgtFloating:EgtFloatingTray>

Project/ProjectV.xaml.vb

@@ -1,3 +1,7 @@
 Public Class ProjectV
 
+   Private Sub LoadPage() Handles Me.Loaded
+      OmagOFFICEMap.SetRefProjectV(Me)
+   End Sub
+
 End Class

SideEntityControl/SideEntityControlV.xaml

@@ -11,7 +11,8 @@
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
-      </Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+        </Grid.RowDefinitions>
 
         <!--Titolo delle colonne-->
         <Grid Visibility="{Binding Legenda_Visibility}"
@@ -185,6 +186,19 @@
                               Grid.Column="1"/>
       </Grid>
 
+        <Grid Visibility="{Binding Parameter6_Visibility}"
+          Grid.Row="6"
+          Margin="0,0,0,5">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.8*"/>
+                <ColumnDefinition Width="1.2*"/>
+            </Grid.ColumnDefinitions>
+
+            <TextBlock Text="{Binding Parameter6Msg}" Grid.Row="2"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding Parameter6}"
+                                Grid.Column="1"/>
+        </Grid>
+
     </Grid>
    
 </UserControl>

SideEntityControl/SideEntityControlVM.vb

@@ -404,6 +404,40 @@ Public Class SideEntityControlVM
 
 #End Region    'Parameter 5
 
+#Region "Parameter 6"
+
+   Private m_Parameter6_Visibility As Visibility
+   Public Property Parameter6_Visibility As Visibility
+      Get
+         Return m_Parameter6_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter6_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter6_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter6 As Double
+   Public Property Parameter6 As String
+      Get
+         Return LenToString(m_Parameter6, 2)
+      End Get
+      Set(value As String)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter6)
+            m_dEngraveAngle = m_Parameter6
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+         End If
+      End Set
+   End Property
+   Private Sub SetParameter6(value As Double)
+      m_Parameter6 = value
+      NotifyPropertyChanged("Parameter6")
+   End Sub
+
+#End Region
+
    Private m_dSideAngle As Double = 0
 
    Private m_HeightA As Double = 0
@@ -422,6 +456,7 @@ Public Class SideEntityControlVM
    Private m_dDripDepth As Double = 10
    Private m_dEngraveDepth2 As Double = 5
    Private m_dDripShort As Double = 0
+   Private m_dEngraveAngle As Double = 0
 
    Private m_CallingWndScene As Scene
    Private m_CallingWindow As CallingWindowOpt
@@ -480,6 +515,16 @@ Public Class SideEntityControlVM
       End Set
    End Property
 
+   Private m_Parameter6Msg As String = "Angle"
+   Public Property Parameter6Msg As String
+      Get
+         Return m_Parameter6Msg      ' Angolo
+      End Get
+      Set(value As String)
+         m_Parameter6Msg = value
+      End Set
+   End Property
+
 #End Region    ' Messages
 
 #Region "CONSTRUCTOR"
@@ -526,18 +571,29 @@ Public Class SideEntityControlVM
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Visible
+         Parameter6_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          Parameter2_Visibility = Visibility.Hidden
          Parameter23_Visibility = Windows.Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Temporaneamente lo disabilito
+         Parameter23_Visibility = Windows.Visibility.Visible
+         Parameter4_Visibility = Visibility.Visible
+         Parameter2ab_Visibility = Visibility.Visible
+         Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Visible
       Else
          ' Temporaneamente lo disabilito
          Parameter23_Visibility = Windows.Visibility.Visible
@@ -545,6 +601,7 @@ Public Class SideEntityControlVM
          Parameter2ab_Visibility = Visibility.Visible
          Parameter2_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
       End If
 
       '------------------ VALORI E TITOLI PARAMETRI 
@@ -576,12 +633,14 @@ Public Class SideEntityControlVM
          m_dDripDepth = GetMainPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10)
          m_dDripShort = GetMainPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0)
          m_dEngraveDepth2 = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0)
+         m_dEngraveAngle = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0)
          SetParameter1(m_dDripOffset)
          SetParameter2(m_dDripOffset2)
          SetParameter2a(m_nEngrNbr2)
          SetParameter2b(m_dDripOffset2)
          SetParameter3(m_dDripDepth)
          SetParameter4(m_dEngraveDepth2)
+         SetParameter6(m_dEngraveAngle)
 
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          ' definisco i nomi dei campi
@@ -789,18 +848,22 @@ Public Class SideEntityControlVM
       If m_CallingWindow = CallingWindowOpt.DXFIMPORT Or m_CallingWindow = CallingWindowOpt.COMPO Then
          If m_Mode = ModeOpt.SIDEANGLE Then
             For Each Entity In m_SideEntityList
-               If DirectCast(Entity, SideAngleEntity).dSideAngle <> 0 Then
+               If TypeOf Entity Is SideAngleEntity Then
-                  Dim nI As Integer = 0
+                  If DirectCast(Entity, SideAngleEntity).dSideAngle <> 0 Then
-                  StringToInt(Entity.sEntityName.Substring(1), nI)
+                     Dim nI As Integer = 0
-                  CheckSide(nI)
+                     StringToInt(Entity.sEntityName.Substring(1), nI)
+                     CheckSide(nI)
+                  End If
                End If
             Next
          Else
             For Each Entity In m_SideEntityList
-               If DirectCast(Entity, DripEntity).bHaveDrip Then
+               If TypeOf Entity Is DripEntity Then
-                  Dim nI As Integer = 0
+                  If DirectCast(Entity, DripEntity).bHaveDrip Then
-                  StringToInt(Entity.sEntityName.Substring(1), nI)
+                     Dim nI As Integer = 0
-                  CheckSide(nI)
+                     StringToInt(Entity.sEntityName.Substring(1), nI)
+                     CheckSide(nI)
+                  End If
                End If
             Next
          End If
@@ -1191,7 +1254,11 @@ Public Class SideEntityControlVM
          End While
       End If
 
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
+         ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
@@ -1210,14 +1277,70 @@ Public Class SideEntityControlVM
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            ' EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    ' Funzione che modifica l'inclinazione di un lato
@@ -1378,6 +1501,7 @@ Public Class SideEntityControlVM
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, LenToString(m_dDripShort, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)

Utility/OmagOFFICEDictionary.xaml

@@ -18,6 +18,7 @@
    <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
    <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
    <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+   <OmagOFFICE:PrintPanelVM x:Key="PrintPanelVM"/>
    <OmagOFFICE:MyMachinePanelVM x:Key="MachinePanelVM"/>
    <OmagOFFICE:VeinMatchPanelVM x:Key="VeinMatchPanelVM"/>
    <OmagOFFICE:OptionPanelVM x:Key="OptionPanelVM"/>
@@ -223,7 +224,11 @@
       <Setter Property="Height" Value="30"/>
    </Style>
 
-   <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+    <Style x:Key="OptionPanel_ToggleWrapButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="45"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
       <Setter Property="Height" Value="60"/>
       <Setter Property="Width" Value="60"/>
    </Style>

Utility/OmagOFFICEMap.vb

@@ -1,5 +1,6 @@
 Imports EgtWPFLib5
 Imports EgtPHOTOLib
+Imports EgtUILib
 
 Module OmagOFFICEMap
 
@@ -229,6 +230,43 @@ Module OmagOFFICEMap
       Return Not IsNothing(m_refSimulTabVM)
    End Function
 
+
+   Private m_refProjectV As ProjectV
+   Friend Sub SetRefProjectV(ProjectV As ProjectV)
+      m_refProjectV = ProjectV
+   End Sub
+
+   Private m_WidthProjectV As Integer = 2000
+   Friend Sub SetWidthDimProjectV(Width As Integer)
+      m_WidthProjectV = Width
+   End Sub
+   Friend Function GetWidthDimProjectV() As Integer
+      If Not IsNothing(m_refProjectV) Then
+         Try
+            m_WidthProjectV = CInt(m_refProjectV.ActualWidth)
+         Catch ex As Exception
+            EgtOutLog(ex.Message)
+         End Try
+      End If
+      Return m_WidthProjectV
+   End Function
+
+   Private m_HeightProjectV As Integer = 1000
+   Friend Sub SetHeightDimProjectV(Eight As Integer)
+      m_HeightProjectV = Eight
+   End Sub
+
+   Friend Function GetHeightDimProjectV() As Integer
+      If Not IsNothing(m_refProjectV) Then
+         Try
+            m_HeightProjectV = CInt(m_refProjectV.ActualHeight)
+         Catch ex As Exception
+            EgtOutLog(ex.Message)
+         End Try
+      End If
+      Return m_HeightProjectV
+   End Function
+
 #End Region    ' Set
 
 #Region "Init"