Imports System.Collections.ObjectModel
Imports System.Collections.Specialized
Imports System.Globalization
Imports EgtUILib
Imports EgtWPFLib5

Public Class ShellNumberPanelVM
   Inherits VMBase

#Region "FIELDS & PROPERTIES"

   Public Enum StartMachTypes As Integer
      NULL = 0
      POINT = 1
      COMPO = 2
   End Enum
   Public Enum ShellNumberSelectionTypes As Integer
      CURVE = 1
      EXTRUSION = 2
      BOTH = 3
   End Enum

   Private m_nPartId As Integer = GDB_ID.NULL
   Private m_nShellNumberLayerId As Integer = GDB_ID.NULL
   Friend ReadOnly Property nShellNumberLayerId As Integer
      Get
         Return m_nShellNumberLayerId
      End Get
   End Property

   Private m_ShellNumberList As New ObservableCollection(Of ShellNumberEntity)
   Public ReadOnly Property ShellNumberList As ObservableCollection(Of ShellNumberEntity)
      Get
         Return m_ShellNumberList
      End Get
   End Property
   Private m_SelShellNumber As ShellNumberEntity
   Public Property SelShellNumber As ShellNumberEntity
      Get
         Return m_SelShellNumber
      End Get
      Set(value As ShellNumberEntity)
         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refShellNumberPanelVM.bCPlaneObj_IsActive Then
            NotifyPropertyChanged(NameOf(SelShellNumber))
            Return
         End If
         m_SelShellNumber = value
         EgtDeselectAll()
         If Not IsNothing(value) Then
            EgtSelectObj(value.nCurveId)
            EgtSelectObj(value.nExtrusionId)
            ' aggiorno visibilita' bottoni edit
            NotifyPropertyChanged(NameOf(Compo_Visibility))
            ' aggiorno campi di testo posizione
            NotifyPropertyChanged(NameOf(sXPos))
            NotifyPropertyChanged(NameOf(sYPos))
            NotifyPropertyChanged(NameOf(sZPos))
         End If
         EgtDraw()
      End Set
   End Property

   Public Property sXPos As String
      Get
         If Not IsNothing(m_SelShellNumber) Then
            Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
            Dim b3Reference As New BBox3d
            EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Reference)
            Return LenToString(b3Reference.Min.x, 1)
         Else
            Return ""
         End If
      End Get
      Set(value As String)
         Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
         Dim b3Reference As New BBox3d
         EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Reference)
         Dim dNewXPos As Double = b3Reference.Min.x
         StringToLen(value, dNewXPos)
         If dNewXPos >= -b3Reference.DimX AndAlso dNewXPos <= CurrentMachine.b3Tab.DimX - b3Reference.DimX Then
            EgtMove(m_SelShellNumber.nCurveId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
            EgtDraw()
         Else
            NotifyPropertyChanged(NameOf(sXPos))
         End If
         ' Imposto flag di ricalcolo slice
         EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
      End Set
   End Property

   Public Property sYPos As String
      Get
         If Not IsNothing(m_SelShellNumber) Then
            Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
            Dim b3Reference As New BBox3d
            EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Reference)
            Return LenToString(b3Reference.Min.y, 1)
         Else
            Return ""
         End If
      End Get
      Set(value As String)
         Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
         Dim b3Reference As New BBox3d
         EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Reference)
         Dim dNewYPos As Double = b3Reference.Min.y
         StringToLen(value, dNewYPos)
         If dNewYPos >= -b3Reference.DimY AndAlso dNewYPos <= CurrentMachine.b3Tab.DimY - b3Reference.DimY Then
            EgtMove(m_SelShellNumber.nCurveId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
            EgtDraw()
         Else
            NotifyPropertyChanged(NameOf(sYPos))
         End If
         ' Imposto flag di ricalcolo slice
         EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
      End Set
   End Property

   Public Property sZPos As String
      Get
         If Not IsNothing(m_SelShellNumber) Then
            Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
            Dim b3Reference As New BBox3d
            EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Reference)
            Return LenToString(b3Reference.Min.z, 1)
         Else
            Return ""
         End If
      End Get
      Set(value As String)
         Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
         Dim b3Reference As New BBox3d
         EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Reference)
         Dim dNewZPos As Double = b3Reference.Min.y
         StringToLen(value, dNewZPos)
         If dNewZPos >= -1000 Then
            EgtMove(m_SelShellNumber.nCurveId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min, GDB_RT.GLOB)
            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min, GDB_RT.GLOB)
            EgtDraw()
         Else
            NotifyPropertyChanged(NameOf(sZPos))
         End If
         ' Imposto flag di ricalcolo slice
         EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
      End Set
   End Property

   Private m_RotAxes() As Boolean = {False, False, True}
   Public Property RotX As Boolean
      Get
         Return m_RotAxes(0)
      End Get
      Set(value As Boolean)
         m_RotAxes(0) = value
      End Set
   End Property
   Public Property RotY As Boolean
      Get
         Return m_RotAxes(1)
      End Get
      Set(value As Boolean)
         m_RotAxes(1) = value
      End Set
   End Property
   Public Property RotZ As Boolean
      Get
         Return m_RotAxes(2)
      End Get
      Set(value As Boolean)
         m_RotAxes(2) = value
      End Set
   End Property

   Public ReadOnly Property vtSelRotAxes As Vector3d
      Get
         If m_RotAxes(0) Then
            Return Vector3d.X_AX
         ElseIf m_RotAxes(1) Then
            Return Vector3d.Y_AX
         Else
            Return Vector3d.Z_AX
         End If
      End Get
   End Property

   Private m_sRotAngle As String
   Public Property sRotAngle As String
      Get
         Return m_sRotAngle
      End Get
      Set(value As String)
         Dim dNewAngle As Double = 0
         If Not StringToLen(value, dNewAngle) Then
            m_sRotAngle = 0
            NotifyPropertyChanged(NameOf(sRotAngle))
            Return
         End If
         Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
         Dim b3Rib As New BBox3d
         EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Rib)
         Dim bOk As Boolean = False
         bOk = EgtRotate(nId, b3Rib.Center(), vtSelRotAxes, dNewAngle, GDB_RT.GLOB)
         If bOk AndAlso m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW Then EgtRotate(m_SelShellNumber.nExtrusionId, b3Rib.Center, vtSelRotAxes, dNewAngle, GDB_RT.GLOB)
         If bOk Then
            EgtDraw()
            RefreshPos()
            m_sRotAngle = 0
            NotifyPropertyChanged(NameOf(sRotAngle))
            ' Imposto flag di ricalcolo slice
            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
         Else
            m_sRotAngle = value
         End If
      End Set
   End Property

   Private m_bAdd_IsChecked As Boolean
   Public Property bAdd_IsChecked As Boolean
      Get
         Return m_bAdd_IsChecked
      End Get
      Set(value As Boolean)
         If Not m_bMachParam_IsChecked AndAlso Map.refSceneHostVM.MainController.GetStep = 0 AndAlso Not m_bCPlaneObj_IsActive Then
            m_bAdd_IsChecked = value
            If value Then
               m_bEdit_IsChecked = False
               m_bGrid_IsChecked = False
               m_bMove_IsChecked = False
               m_bRotate_IsChecked = False
               NotifyPropertyChanged(NameOf(bEdit_IsChecked))
               NotifyPropertyChanged(NameOf(bGrid_IsChecked))
               NotifyPropertyChanged(NameOf(bMove_IsChecked))
               NotifyPropertyChanged(NameOf(bRotate_IsChecked))
            End If
         End If
      End Set
   End Property

   Private m_bEdit_IsChecked As Boolean
   Public Property bEdit_IsChecked As Boolean
      Get
         Return m_bEdit_IsChecked
      End Get
      Set(value As Boolean)
         If Not IsNothing(m_SelShellNumber) AndAlso Not m_bMachParam_IsChecked AndAlso Map.refSceneHostVM.MainController.GetStep = 0 AndAlso Not m_bCPlaneObj_IsActive Then
            m_bEdit_IsChecked = value
            If value Then
               m_bAdd_IsChecked = False
               m_bGrid_IsChecked = False
               m_bMove_IsChecked = False
               m_bRotate_IsChecked = False
               NotifyPropertyChanged(NameOf(bAdd_IsChecked))
               NotifyPropertyChanged(NameOf(bGrid_IsChecked))
               NotifyPropertyChanged(NameOf(bMove_IsChecked))
               NotifyPropertyChanged(NameOf(bRotate_IsChecked))
            End If
         Else
            NotifyPropertyChanged(NameOf(bEdit_IsChecked))
         End If
      End Set
   End Property

   Private m_bGrid_IsChecked As Boolean
   Public Property bGrid_IsChecked As Boolean
      Get
         Return m_bGrid_IsChecked
      End Get
      Set(value As Boolean)
         If Not m_bMachParam_IsChecked AndAlso Map.refSceneHostVM.MainController.GetStep = 0 AndAlso Not m_bCPlaneObj_IsActive Then
            m_bGrid_IsChecked = value
            If value Then
               m_bAdd_IsChecked = False
               m_bEdit_IsChecked = False
               m_bMove_IsChecked = False
               m_bRotate_IsChecked = False
               NotifyPropertyChanged(NameOf(bAdd_IsChecked))
               NotifyPropertyChanged(NameOf(bEdit_IsChecked))
               NotifyPropertyChanged(NameOf(bMove_IsChecked))
               NotifyPropertyChanged(NameOf(bRotate_IsChecked))
            End If
         End If
      End Set
   End Property

   Public ReadOnly Property bGrid_IsEnabled As Boolean
      Get
         Return Map.refMyStatusBarVM.bGridVisibility
      End Get
   End Property

   Private m_bMove_IsChecked As Boolean
   Public Property bMove_IsChecked As Boolean
      Get
         Return m_bMove_IsChecked
      End Get
      Set(value As Boolean)
         If Not IsNothing(m_SelShellNumber) AndAlso Not m_bMachParam_IsChecked AndAlso Map.refSceneHostVM.MainController.GetStep = 0 AndAlso Not m_bCPlaneObj_IsActive Then
            m_bMove_IsChecked = value
            If value Then
               m_bAdd_IsChecked = False
               m_bEdit_IsChecked = False
               m_bGrid_IsChecked = False
               m_bRotate_IsChecked = False
               NotifyPropertyChanged(NameOf(bAdd_IsChecked))
               NotifyPropertyChanged(NameOf(bEdit_IsChecked))
               NotifyPropertyChanged(NameOf(bGrid_IsChecked))
               NotifyPropertyChanged(NameOf(bRotate_IsChecked))
            End If
         Else
            NotifyPropertyChanged(NameOf(bMove_IsChecked))
         End If
      End Set
   End Property

   Private m_bRotate_IsChecked As Boolean
   Public Property bRotate_IsChecked As Boolean
      Get
         Return m_bRotate_IsChecked
      End Get
      Set(value As Boolean)
         If Not IsNothing(m_SelShellNumber) AndAlso Not m_bMachParam_IsChecked AndAlso Map.refSceneHostVM.MainController.GetStep = 0 AndAlso Not m_bCPlaneObj_IsActive Then
            m_bRotate_IsChecked = value
            If value Then
               m_bAdd_IsChecked = False
               m_bEdit_IsChecked = False
               m_bGrid_IsChecked = False
               m_bMove_IsChecked = False
               NotifyPropertyChanged(NameOf(bAdd_IsChecked))
               NotifyPropertyChanged(NameOf(bEdit_IsChecked))
               NotifyPropertyChanged(NameOf(bGrid_IsChecked))
               NotifyPropertyChanged(NameOf(bMove_IsChecked))
            End If
         Else
            NotifyPropertyChanged(NameOf(bRotate_IsChecked))
         End If
      End Set
   End Property

   Private m_bMachParam_IsChecked As Boolean
   Public Property bMachParam_IsChecked As Boolean
      Get
         Return m_bMachParam_IsChecked
      End Get
      Set(value As Boolean)
         If Not IsNothing(m_SelShellNumber) AndAlso Map.refSceneHostVM.MainController.GetStep = 0 AndAlso Not m_bCPlaneObj_IsActive AndAlso Not IsNothing(Map.refTopPanelVM.SelMachining) AndAlso value Then
            m_bMachParam_IsChecked = True
            m_bAdd_IsChecked = False
            m_bEdit_IsChecked = False
            m_bGrid_IsChecked = False
            m_bMove_IsChecked = False
            m_bRotate_IsChecked = False
            NotifyPropertyChanged(NameOf(bAdd_IsChecked))
            NotifyPropertyChanged(NameOf(bEdit_IsChecked))
            NotifyPropertyChanged(NameOf(bGrid_IsChecked))
            NotifyPropertyChanged(NameOf(bMove_IsChecked))
            NotifyPropertyChanged(NameOf(bRotate_IsChecked))
            Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.SHELLNUMBERPARAM)
            NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
            ' disattivo interfaccia
            ManageInterface(False)
         Else
            NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
         End If
      End Set
   End Property
   Friend Sub ResetMachParamIsChecked()
      m_bMachParam_IsChecked = False
      NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
      NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
      ' riattivo interfaccia
      ManageInterface(True)
   End Sub

   Public ReadOnly Property Compo_Visibility As Visibility
      Get
         Return If(Not IsNothing(m_SelShellNumber) AndAlso m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, Visibility.Visible, Visibility.Collapsed)
      End Get
   End Property

   Private m_ShellNumberList_IsEnabled As Boolean = False
   Public ReadOnly Property ShellNumberList_IsEnabled As Boolean
      Get
         Return If(m_ShellNumberList.Count > 0, m_ShellNumberList_IsEnabled, False)
      End Get
   End Property
   Friend Sub SetShellNumberListIsEnabled(bValue As Boolean)
      m_ShellNumberList_IsEnabled = bValue
      NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
   End Sub

   ' riferimento griglia all'ingresso in questa pagina
   Private m_OriginalGridFrame As New Frame3d

   ' parametro che indica se e' in corso il disegno di un percorso
   Private m_bIsCreatingPath As Boolean = False
   Public ReadOnly Property bIsCreatingPath As Boolean
      Get
         Return m_bIsCreatingPath
      End Get
   End Property
   Private m_bIsCreatingExtrusion As Boolean = False
   Public ReadOnly Property bIsCreatingExtrusion As Boolean
      Get
         Return m_bIsCreatingExtrusion
      End Get
   End Property

   Private m_bEscOnLine2P As Boolean = False

#Region "Tooltip"

   Public ReadOnly Property Import_ToolTip As String
      Get
         Return "Import"
      End Get
   End Property

   Public ReadOnly Property Point_ToolTip As String
      Get
         Return "Point"
      End Get
   End Property

   Public ReadOnly Property Line2P_ToolTip As String
      Get
         Return "Multiline"
      End Get
   End Property

   Public ReadOnly Property Delete_ToolTip As String
      Get
         Return "Delete"
      End Get
   End Property

   Public ReadOnly Property ModifyCurve_ToolTip As String
      Get
         Return "Modify Curve"
      End Get
   End Property

   Public ReadOnly Property AddPointCurve_ToolTip As String
      Get
         Return "Add Point to Curve"
      End Get
   End Property

   Public ReadOnly Property RemovePointCurve_ToolTip As String
      Get
         Return "Remove Point From Curve"
      End Get
   End Property

   Public ReadOnly Property Extrude_ToolTip As String
      Get
         Return "Modify Extrusion"
      End Get
   End Property

   Public ReadOnly Property CPlaneTop_ToolTip As String
      Get
         Return "Grid From Top"
      End Get
   End Property

   Public ReadOnly Property CPlaneFront_ToolTip As String
      Get
         Return "Grid From Front"
      End Get
   End Property

   Public ReadOnly Property CPlaneRight_ToolTip As String
      Get
         Return "Grid From Right"
      End Get
   End Property

   Public ReadOnly Property CPlaneBack_ToolTip As String
      Get
         Return "Grid From Back"
      End Get
   End Property

   Public ReadOnly Property CPlaneLeft_ToolTip As String
      Get
         Return "Grid From Left"
      End Get
   End Property

   Public ReadOnly Property CPlaneBottom_ToolTip As String
      Get
         Return "Grid From Bottom"
      End Get
   End Property

   Public ReadOnly Property CPlaneElevation_ToolTip As String
      Get
         Return "Grid Elevation"
      End Get
   End Property

   Public ReadOnly Property CPlaneOrigin_ToolTip As String
      Get
         Return "Grid Origin"
      End Get
   End Property

   Public ReadOnly Property CPlaneObj_ToolTip As String
      Get
         Return "Grid On Object"
      End Get
   End Property

#End Region    ' Tooltip

   ' Definizione comandi
   Private m_cmdImport As ICommand
   Private m_cmdLine2P As ICommand
   Private m_cmdDelete As ICommand
   Private m_cmdModifyCurve As ICommand
   Private m_cmdAddPointCurve As ICommand
   Private m_cmdRemovePointCurve As ICommand
   Private m_cmdExtrude As ICommand
   Private m_cmdCPlaneTop As ICommand
   Private m_cmdCPlaneFront As ICommand
   Private m_cmdCPlaneRight As ICommand
   Private m_cmdCPlaneBack As ICommand
   Private m_cmdCPlaneLeft As ICommand
   Private m_cmdCPlaneBottom As ICommand
   Private m_cmdCPlaneView As ICommand
   Private m_cmdCPlaneElevation As ICommand
   Private m_cmdCPlaneOrigin As ICommand
   Private m_cmdCPlaneRotate As ICommand
   Private m_cmdCPlane3P As ICommand
   Private m_cmdCPlanePerpObj As ICommand
   Private m_cmdCPlaneObj As ICommand
   Private m_cmdDragMove As ICommand
   Private m_cmdDragRotate As ICommand

#End Region    ' FIELDS & PROPERTIES

#Region "CONSTRUCTORS"

   Sub New()
      ' Creo riferimento a questa classe in EgtCAM5Map
      Map.SetRefShellNumberPanelVM(Me)
   End Sub

#End Region    ' CONSTRUCTORS

#Region "METHODS"

   Friend Sub Init()
      ' asse rotazione di default
      RotZ = True
      NotifyPropertyChanged(NameOf(RotZ))
      ' azzero indice 
      StartEntity.ResetSharedIndex()
      ' fisso frame originale
      m_OriginalGridFrame = EgtGetGridFrame()
      ' recupero dati pezzo selezionato layer ed entita'
      m_nPartId = Map.refTopPanelVM.SelPart.nPartId
      m_nShellNumberLayerId = Map.refTopPanelVM.SelPart.nShellNumberLayerId
      If m_nShellNumberLayerId = GDB_ID.NULL Then
         m_nShellNumberLayerId = EgtCreateGroup(m_nPartId)
         EgtSetName(m_nShellNumberLayerId, LAY_SHELL_NBR)
      End If
      'recupero tutte le entita' shell number
      m_ShellNumberList.Clear()
      Dim nShellNumberId As Integer = EgtGetFirstInGroup(m_nShellNumberLayerId)
      While nShellNumberId <> GDB_ID.NULL
         Dim EntityType As GDB_TY = EgtGetType(nShellNumberId)
         Dim DrawType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
         EgtGetInfo(nShellNumberId, KEY_SHELLNBR_TYPE, DrawType)
         If EntityType = GDB_TY.CRV_COMPO AndAlso DrawType = ShellNumberEntity.ShellNumberTypes.FROMDRAW Then
            Dim nExtrusionId As Integer = GDB_ID.NULL
            EgtGetInfo(nShellNumberId, KEY_EXTRUSION_ID, nExtrusionId)
            Dim ShellNumberEntity As ShellNumberEntity = New ShellNumberEntity(ShellNumberEntity.ShellNumberTypes.FROMDRAW, nShellNumberId)
            If nExtrusionId <> GDB_ID.NULL Then
               ShellNumberEntity.SetExtrusionId(nExtrusionId)
            End If
            m_ShellNumberList.Add(ShellNumberEntity)
         ElseIf (EntityType = GDB_TY.SRF_BEZ OrElse EntityType = GDB_TY.SRF_MESH OrElse EntityType = GDB_TY.SRF_FRGN) AndAlso DrawType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
            Dim ShellNumberEntity As ShellNumberEntity = New ShellNumberEntity(ShellNumberEntity.ShellNumberTypes.FROMIMPORT, nShellNumberId)
            m_ShellNumberList.Add(ShellNumberEntity)
         End If
         nShellNumberId = EgtGetNext(nShellNumberId)
      End While
      If m_ShellNumberList.Count > 0 Then
         SelShellNumber = m_ShellNumberList(0)
         NotifyPropertyChanged(NameOf(SelShellNumber))
      End If
      ' abilito lista shell number
      SetShellNumberListIsEnabled(True)
      Map.refSceneHostVM.MainScene.SetStatusNull()
   End Sub

   Friend Sub Dispose()
      ' ripristino frame originale
      EgtSetGridFrame(m_OriginalGridFrame)
      ' se in modifica parametri
      If m_bMachParam_IsChecked Then
         ' ripristino modalita' standard
         Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.NULL)
         Map.refShellNumberPanelVM.ResetMachParamIsChecked()
      End If
      EgtDeselectAll()
      EgtDraw()
      Map.refSceneHostVM.MainScene.SetStatusNull()
   End Sub

   Friend Sub RefreshPos()
      NotifyPropertyChanged(NameOf(sXPos))
      NotifyPropertyChanged(NameOf(sYPos))
      NotifyPropertyChanged(NameOf(sZPos))
   End Sub

   Private Function InitCommand(RibSelectionType As ShellNumberSelectionTypes) As Boolean
      ' attivo modifiche su scena
      Map.refSceneHostVM.MainScene.ResetStatus()
      ' rendo traspanete estrusione
      EgtSetAlpha(m_SelShellNumber.nExtrusionId, 50)
      ' seleziono percorso corrente
      EgtDeselectAll()
      Select Case RibSelectionType
         Case ShellNumberSelectionTypes.CURVE
            EgtSelectObj(m_SelShellNumber.nCurveId)
         Case ShellNumberSelectionTypes.EXTRUSION
            ' creo layer per estrusione
            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
            If nNewExtrusionLayerId = GDB_ID.NULL Then
               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
            Else
               EgtEmptyGroup(nNewExtrusionLayerId)
            End If
            EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
            EgtSelectObj(m_SelShellNumber.nCurveId)
         Case ShellNumberSelectionTypes.BOTH
            EgtSelectObj(m_SelShellNumber.nCurveId)
            EgtSelectObj(m_SelShellNumber.nExtrusionId)
      End Select
      EgtDraw()
      ' disattivo il resto dell'interfaccia
      ManageInterface(False)
      Return True
   End Function

   Friend Sub UpdateUI()
      ' se attiva operazione in piu' passaggi, esco
      If Map.refSceneHostVM.MainController.GetContinue() Then Return
   End Sub

   Friend Sub OnExecCmdEnd(command As Controller.CMD)
      m_bEscOnLine2P = False
      Select Case command
         Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
            ' leggo altezza estrusione
            Dim dExtrusionLength As Double = 0
            EgtGetInfo(m_SelShellNumber.nExtrusionId, KEY_EXTRUSION_LENGTH, dExtrusionLength)
            ' cancello estrusione
            EgtErase(m_SelShellNumber.nExtrusionId)
            Dim nNewEntityId As Integer = EgtCreateSurfTmByRegionExtrusion(m_nShellNumberLayerId, 1, {m_SelShellNumber.nCurveId}, Vector3d.Z_AX * dExtrusionLength, EPS_STM)
            EgtSetName(nNewEntityId, RIB_EXTRUSION)
            EgtSetInfo(nNewEntityId, KEY_EXTRUSION_LENGTH, dExtrusionLength)
            ' resetto colore entita'
            EgtResetColor(nNewEntityId)
            ' aggiorno riferimento nella curva
            m_SelShellNumber.SetExtrusionId(nNewEntityId)
            ' seleziono nuova estrusione
            EgtSelectObj(m_SelShellNumber.nExtrusionId)
            ' ripristino trasparenza estrusione
            EgtSetAlpha(m_SelShellNumber.nExtrusionId, 100)
            EgtDraw()
            ' rimetto la selezione scena a null
            Map.refSceneHostVM.MainScene.SetStatusNull()
         Case Controller.CMD.MOVE, Controller.CMD.ROTATE
            EgtSetAlpha(Map.refShellNumberPanelVM.SelShellNumber.nExtrusionId, 100)
            ' seleziono nuova estrusione
            EgtSelectObj(m_SelShellNumber.nExtrusionId)
            EgtDraw()
            ' rimetto la selezione scena a null
            Map.refSceneHostVM.MainScene.SetStatusNull()
         Case Controller.CMD.GRID_ELEVATION, Controller.CMD.GRID_3P, Controller.CMD.GRID_ORIGIN, Controller.CMD.GRID_PERPCURVE,
              Controller.CMD.GRID_ROTATE, Controller.CMD.GRID_ROTATE3D, Controller.CMD.GRID_OBJ
            ' rimetto la selezione scena a null
            Map.refSceneHostVM.MainScene.SetStatusNull()
      End Select
      Select Case command
         Case Controller.CMD.LINE2P, Controller.CMD.DELETE, Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE, Controller.CMD.EXTRUDE,
              Controller.CMD.MOVE, Controller.CMD.ROTATE
            ' Imposto flag di ricalcolo slice
            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
      End Select
      ' se non ho creato percorso riabilito interfaccia
      If Not m_bIsCreatingPath Then
         ManageInterface(True)
      End If
      If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
      ' se finita creazione estrusione
      If m_bIsCreatingExtrusion Then
         m_bIsCreatingExtrusion = False
         ' se riferimento non nullo, elimino vecchia estrusione
         If m_SelShellNumber.nExtrusionId <> GDB_ID.NULL Then
            EgtErase(m_SelShellNumber.nExtrusionId)
         End If
         Dim NewEntity As ShellNumberEntity = Nothing
         Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
         Dim nNewEntityId As Integer = EgtGetFirstInGroup(nNewExtrusionLayerId)
         Dim NewGeomType As GDB_TY = EgtGetType(nNewEntityId)
         If NewGeomType = GDB_TY.SRF_FRGN OrElse NewGeomType = GDB_TY.SRF_MESH Then
            EgtSetName(nNewEntityId, RIB_EXTRUSION)
            Dim dExtrusionLength As Double = 0
            StringToLen(Map.refControllerInputPanelVM.Text, dExtrusionLength)
            EgtSetInfo(nNewEntityId, KEY_EXTRUSION_LENGTH, dExtrusionLength)
            ' resetto colore entita'
            EgtResetColor(nNewEntityId)
            '' lo sposto nel layer dei rib
            EgtRelocateGlob(nNewEntityId, m_nShellNumberLayerId, GDB_POS.LAST_SON)
            ' aggiungo riferimento a curva
            m_SelShellNumber.SetExtrusionId(nNewEntityId)
         End If
         ' cancello layer estrusione
         EgtErase(nNewExtrusionLayerId)
         ' aggiorno posizione
         RefreshPos()
         EgtDraw()
         ' rimetto la selezione scena a null
         Map.refSceneHostVM.MainScene.SetStatusNull()
      End If
      ' se finita creazione curva 
      If bIsCreatingPath Then
         m_bIsCreatingPath = False
         Dim NewEntity As ShellNumberEntity = Nothing
         Dim nNewRibLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
         Dim nNewEntityId As Integer = EgtGetFirstInGroup(nNewRibLayerId)
         Dim NewGeomType As GDB_TY = EgtGetType(nNewEntityId)
         If NewGeomType = GDB_TY.CRV_COMPO Then
            If Not EgtCurveIsClosed(nNewEntityId) Then
               EgtCloseCurveCompo(nNewEntityId)
            End If
            EgtSetName(nNewEntityId, RIB_CURVE)
            ' resetto colore entita'
            EgtResetColor(nNewEntityId)
            ' lo sposto nel layer dei rib
            EgtRelocateGlob(nNewEntityId, m_nShellNumberLayerId, GDB_POS.LAST_SON)
            ' lo aggiungo alla lista
            NewEntity = New ShellNumberEntity(ShellNumberEntity.ShellNumberTypes.FROMDRAW, nNewEntityId)
            m_ShellNumberList.Add(NewEntity)
            ' lo seleziono
            SelShellNumber = NewEntity
            NotifyPropertyChanged(NameOf(SelShellNumber))
            ' verifico se esiste gia' layer estrusione e lo svuoto
            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
            If nNewExtrusionLayerId <> GDB_ID.NULL Then
               EgtEmptyGroup(nNewExtrusionLayerId)
            Else
               ' altrimenti lo creo
               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
            End If
            EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
            ' seleziono percorso da estrudere
            EgtDeselectAll()
            EgtSelectObj(nNewEntityId)
            If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.EXTRUDE) Then
               m_bIsCreatingExtrusion = True
               Map.refControllerInputPanelVM.IsChecked = True
               If Not EgtCurveIsClosed(nNewEntityId) Then
                  m_bEscOnLine2P = True
               End If
            Else
               ' cancello layer
               EgtErase(nNewExtrusionLayerId)
            End If
         End If
         ' cancello layer di disegno
         EgtErase(nNewRibLayerId)
      End If
   End Sub

   Friend Sub OnKeyDown(Key As Forms.Keys)
      If Key = Forms.Keys.Escape Then
         ' se attiva, disattivo griglia su oggetto
         If m_bCPlaneObj_IsActive Then
            m_bCPlaneObj_IsActive = False
            ResetCPlaneObjIsActive()
            ' ripristino selezioni precedenti
            For Each Id In Map.refShellNumberPanelVM.PrevSelObjs
               EgtSelectObj(Id)
            Next
            EgtDraw()
            ' rimetto la selezione scena a null
            Map.refSceneHostVM.MainScene.SetStatusNull()
         End If
         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
         If m_bEscOnLine2P Then
            m_bEscOnLine2P = False
         Else
            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
            ManageInterface(True)
         End If
      End If
   End Sub

   Friend Function OnMouseSelectingObj(nId As Integer) As Boolean
      Return EgtGetParent(nId) = m_nShellNumberLayerId
   End Function

   Friend Sub SelStartFromId(nId)
      Dim SelShellNumberEntity As ShellNumberEntity = m_ShellNumberList.FirstOrDefault(Function(x) x.nCurveId = nId OrElse x.nExtrusionId = nId)
      If Not IsNothing(SelShellNumberEntity) Then
         SelShellNumber = SelShellNumberEntity
         NotifyPropertyChanged(NameOf(SelShellNumber))
      End If
   End Sub

   Friend Sub SelLastShellNumber()
      If ShellNumberList.Count <= 0 Then Return
      SelShellNumber = ShellNumberList(ShellNumberList.Count - 1)
      NotifyPropertyChanged(NameOf(SelShellNumber))
   End Sub

   Friend Shared Function GetNextShellNumberIndex()
      Dim nShellNumberIndex As Integer = 0
      Dim nShellNumberId As Integer = EgtGetFirstInGroup(Map.refTopPanelVM.SelPart.nShellNumberLayerId)
      While nShellNumberId <> GDB_ID.NULL
         Dim nCurrIndex As Integer = GDB_ID.NULL
         EgtGetInfo(nShellNumberId, SHELLNUMBER_ID, nCurrIndex)
         If nCurrIndex > nShellNumberIndex Then
            nShellNumberIndex = nCurrIndex
         End If
         nShellNumberId = EgtGetNext(nShellNumberId)
      End While
      Return nShellNumberIndex + 1
   End Function

   Friend Sub ManageInterface(bValue As Boolean)
      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
      SetShellNumberListIsEnabled(bValue)
   End Sub


#End Region    ' METHODS

#Region "COMMANDS"

#Region "Import"

   ''' <summary>
   ''' Returns a command that do CPlaneTop.
   ''' </summary>
   Public ReadOnly Property Import_Command As ICommand
      Get
         If m_cmdImport Is Nothing Then
            m_cmdImport = New Command(AddressOf Import)
         End If
         Return m_cmdImport
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
   ''' </summary>
   Public Sub Import(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      ManageInterface(False)
      Map.refSceneHostVM.InsertShellNumber()
      ManageInterface(True)
   End Sub

#End Region ' Import

#Region "Line2P"

   ''' <summary>
   ''' Returns a command that do CPlaneTop.
   ''' </summary>
   Public ReadOnly Property Line2P_Command As ICommand
      Get
         If m_cmdLine2P Is Nothing Then
            m_cmdLine2P = New Command(AddressOf Line2P)
         End If
         Return m_cmdLine2P
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
   ''' </summary>
   Public Sub Line2P(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      ManageInterface(False)
      Dim nNewShellNumberLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
      If nNewShellNumberLayerId = GDB_ID.NULL Then nNewShellNumberLayerId = EgtCreateGroup(m_nPartId)
      EgtSetName(nNewShellNumberLayerId, LAY_NEWRIB)
      EgtSetCurrPartLayer(m_nPartId, nNewShellNumberLayerId)
      Map.refSceneHostVM.MainController.SetContinue()
      If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.LINE2P) Then
         m_bIsCreatingPath = True
      End If
   End Sub

#End Region ' Line2P

#Region "Delete"

   Public ReadOnly Property Delete_Command As ICommand
      Get
         If m_cmdDelete Is Nothing Then
            m_cmdDelete = New Command(AddressOf Delete)
         End If
         Return m_cmdDelete
      End Get
   End Property

   Public Sub Delete()
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      If IsNothing(SelShellNumber) Then Return
      Dim bOk As Boolean = False
      Select Case m_SelShellNumber.Type
         Case ShellNumberEntity.ShellNumberTypes.FROMDRAW
            bOk = EgtErase(m_SelShellNumber.nCurveId)
            If bOk Then EgtErase(m_SelShellNumber.nExtrusionId)
         Case ShellNumberEntity.ShellNumberTypes.FROMIMPORT
            bOk = EgtErase(m_SelShellNumber.nExtrusionId)
      End Select
      If bOk Then
         Dim nSelStartIndex As Integer = m_ShellNumberList.IndexOf(SelShellNumber)
         m_ShellNumberList.Remove(SelShellNumber)
         If nSelStartIndex < m_ShellNumberList.Count Then
            SelShellNumber = m_ShellNumberList(nSelStartIndex)
         ElseIf m_ShellNumberList.Count > 0 Then
            SelShellNumber = m_ShellNumberList(m_ShellNumberList.Count - 1)
         Else
            SelShellNumber = Nothing
            m_bEdit_IsChecked = False
            NotifyPropertyChanged(NameOf( bEdit_IsChecked))
         End If
         NotifyPropertyChanged(NameOf(SelShellNumber))
      End If
      SetShellNumberListIsEnabled(True)
   End Sub

#End Region    ' Delete

#Region "ModifyCurve"

   ''' <summary>
   ''' Returns a command that do Linear Dimension.
   ''' </summary>
   Public ReadOnly Property ModifyCurve_Command As ICommand
      Get
         If m_cmdModifyCurve Is Nothing Then
            m_cmdModifyCurve = New Command(AddressOf ModifyCurve)
         End If
         Return m_cmdModifyCurve
      End Get
   End Property

   ''' <summary>
   ''' Execute the LinearDimension.  This method is invoked by the LinDimCommand.
   ''' </summary>
   Public Sub ModifyCurve(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      InitCommand(ShellNumberSelectionTypes.CURVE)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.MODIFYCURVE)
   End Sub

#End Region ' ModifyCurve

#Region "AddPointCurve"

   ''' <summary>
   ''' Returns a command that do Linear Dimension.
   ''' </summary>
   Public ReadOnly Property AddPointCurve_Command As ICommand
      Get
         If m_cmdAddPointCurve Is Nothing Then
            m_cmdAddPointCurve = New Command(AddressOf AddPointCurve)
         End If
         Return m_cmdAddPointCurve
      End Get
   End Property

   ''' <summary>
   ''' Execute the LinearDimension.  This method is invoked by the LinDimCommand.
   ''' </summary>
   Public Sub AddPointCurve(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      InitCommand(ShellNumberSelectionTypes.CURVE)
      If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
         Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.CURVETOARC)
      Else
         Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.ADDPOINTCURVE)
      End If
   End Sub

#End Region ' AddPointCurve

#Region "RemovePointCurve"

   ''' <summary>
   ''' Returns a command that do Linear Dimension.
   ''' </summary>
   Public ReadOnly Property RemovePointCurve_Command As ICommand
      Get
         If m_cmdRemovePointCurve Is Nothing Then
            m_cmdRemovePointCurve = New Command(AddressOf RemovePointCurve)
         End If
         Return m_cmdRemovePointCurve
      End Get
   End Property

   ''' <summary>
   ''' Execute the LinearDimension.  This method is invoked by the LinDimCommand.
   ''' </summary>
   Public Sub RemovePointCurve(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      InitCommand(ShellNumberSelectionTypes.CURVE)
      If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
         Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.CURVETOLINE)
      Else
         Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.REMOVEPOINTCURVE)
      End If
   End Sub

#End Region ' RemovePointCurve

#Region "Extrude"

   ''' <summary>
   ''' Returns a command that do Extrude.
   ''' </summary>
   Public ReadOnly Property Extrude_Command As ICommand
      Get
         If m_cmdExtrude Is Nothing Then
            m_cmdExtrude = New Command(AddressOf Extrude)
         End If
         Return m_cmdExtrude
      End Get
   End Property

   ''' <summary>
   ''' Execute the Extrude.  This method is invoked by the ExtrudeCommand.
   ''' </summary>
   Public Sub Extrude(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      InitCommand(ShellNumberSelectionTypes.EXTRUSION)
      If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.EXTRUDE) Then
         m_bIsCreatingExtrusion = True
         Map.refControllerInputPanelVM.IsChecked = True
      End If
   End Sub

#End Region ' Extrude

#Region "CPlaneTop"

   ''' <summary>
   ''' Returns a command that do CPlaneTop.
   ''' </summary>
   Public ReadOnly Property CPlaneTop_Command As ICommand
      Get
         If m_cmdCPlaneTop Is Nothing Then
            m_cmdCPlaneTop = New Command(AddressOf CPlaneTop)
         End If
         Return m_cmdCPlaneTop
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
   ''' </summary>
   Public Sub CPlaneTop(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.SetLastInteger(Controller.GRID_TYPE.TOP)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID)
   End Sub

#End Region ' CPlaneTop

#Region "CPlaneFront"

   ''' <summary>
   ''' Returns a command that do CPlaneFront.
   ''' </summary>
   Public ReadOnly Property CPlaneFront_Command As ICommand
      Get
         If m_cmdCPlaneFront Is Nothing Then
            m_cmdCPlaneFront = New Command(AddressOf CPlaneFront)
         End If
         Return m_cmdCPlaneFront
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneFront.  This method is invoked by the CPlaneFrontCommand.
   ''' </summary>
   Public Sub CPlaneFront(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.SetLastInteger(Controller.GRID_TYPE.FRONT)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID)
   End Sub

#End Region ' CPlaneFront

#Region "CPlaneRight"

   ''' <summary>
   ''' Returns a command that do CPlaneRight.
   ''' </summary>
   Public ReadOnly Property CPlaneRight_Command As ICommand
      Get
         If m_cmdCPlaneRight Is Nothing Then
            m_cmdCPlaneRight = New Command(AddressOf CPlaneRight)
         End If
         Return m_cmdCPlaneRight
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneRight.  This method is invoked by the CPlaneRightCommand.
   ''' </summary>
   Public Sub CPlaneRight(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.SetLastInteger(Controller.GRID_TYPE.RIGHT)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID)
   End Sub

#End Region ' CPlaneRight

#Region "CPlaneBack"

   ''' <summary>
   ''' Returns a command that do CPlaneBack.
   ''' </summary>
   Public ReadOnly Property CPlaneBack_Command As ICommand
      Get
         If m_cmdCPlaneBack Is Nothing Then
            m_cmdCPlaneBack = New Command(AddressOf CPlaneBack)
         End If
         Return m_cmdCPlaneBack
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneBack.  This method is invoked by the CPlaneBackCommand.
   ''' </summary>
   Public Sub CPlaneBack(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.SetLastInteger(Controller.GRID_TYPE.BACK)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID)
   End Sub

#End Region ' CPlaneBack

#Region "CPlaneLeft"

   ''' <summary>
   ''' Returns a command that do CPlaneLeft.
   ''' </summary>
   Public ReadOnly Property CPlaneLeft_Command As ICommand
      Get
         If m_cmdCPlaneLeft Is Nothing Then
            m_cmdCPlaneLeft = New Command(AddressOf CPlaneLeft)
         End If
         Return m_cmdCPlaneLeft
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneLeft.  This method is invoked by the CPlaneLeftCommand.
   ''' </summary>
   Public Sub CPlaneLeft(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.SetLastInteger(Controller.GRID_TYPE.LEFT)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID)
   End Sub

#End Region ' CPlaneLeft

#Region "CPlaneBottom"

   ''' <summary>
   ''' Returns a command that do CPlaneBottom.
   ''' </summary>
   Public ReadOnly Property CPlaneBottom_Command As ICommand
      Get
         If m_cmdCPlaneBottom Is Nothing Then
            m_cmdCPlaneBottom = New Command(AddressOf CPlaneBottom)
         End If
         Return m_cmdCPlaneBottom
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneBottom.  This method is invoked by the CPlaneBottomCommand.
   ''' </summary>
   Public Sub CPlaneBottom(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.SetLastInteger(Controller.GRID_TYPE.BOTTOM)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID)
   End Sub

#End Region ' CPlaneBottom

#Region "CPlaneElevation"

   ''' <summary>
   ''' Returns a command that do CPlaneElevation.
   ''' </summary>
   Public ReadOnly Property CPlaneElevation_Command As ICommand
      Get
         If m_cmdCPlaneElevation Is Nothing Then
            m_cmdCPlaneElevation = New Command(AddressOf CPlaneElevation)
         End If
         Return m_cmdCPlaneElevation
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneElevation.  This method is invoked by the CPlaneElevationCommand.
   ''' </summary>
   Public Sub CPlaneElevation(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      ManageInterface(False)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
   End Sub

#End Region ' CPlaneElevation

#Region "CPlaneOrigin"

   ''' <summary>
   ''' Returns a command that do CPlaneOrigin.
   ''' </summary>
   Public ReadOnly Property CPlaneOrigin_Command As ICommand
      Get
         If m_cmdCPlaneOrigin Is Nothing Then
            m_cmdCPlaneOrigin = New Command(AddressOf CPlaneOrigin)
         End If
         Return m_cmdCPlaneOrigin
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneOrigin.  This method is invoked by the CPlaneOriginCommand.
   ''' </summary>
   Public Sub CPlaneOrigin(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      ManageInterface(False)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
   End Sub

#End Region ' CPlaneOrigin

#Region "CPlaneRotate"

   ''' <summary>
   ''' Returns a command that do CPlaneRotate.
   ''' </summary>
   Public ReadOnly Property CPlaneRotate_Command As ICommand
      Get
         If m_cmdCPlaneRotate Is Nothing Then
            m_cmdCPlaneRotate = New Command(AddressOf CPlaneRotate)
         End If
         Return m_cmdCPlaneRotate
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneRotate.  This method is invoked by the CPlaneRotateCommand.
   ''' </summary>
   Public Sub CPlaneRotate(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      If (Keyboard.Modifiers And ModifierKeys.Shift) <> ModifierKeys.Shift Then
         Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ROTATE)
      Else
         Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ROTATE3D)
      End If
   End Sub

#End Region ' CPlaneRotate

#Region "CPlane3P"

   ''' <summary>
   ''' Returns a command that do CPlane3P.
   ''' </summary>
   Public ReadOnly Property CPlane3P_Command As ICommand
      Get
         If m_cmdCPlane3P Is Nothing Then
            m_cmdCPlane3P = New Command(AddressOf CPlane3P)
         End If
         Return m_cmdCPlane3P
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlane3P.  This method is invoked by the CPlane3PCommand.
   ''' </summary>
   Public Sub CPlane3P(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_3P)
   End Sub

#End Region ' CPlane3P

#Region "CPlanePerpObj"

   ''' <summary>
   ''' Returns a command that do CPlanePerpObj.
   ''' </summary>
   Public ReadOnly Property CPlanePerpObj_Command As ICommand
      Get
         If m_cmdCPlanePerpObj Is Nothing Then
            m_cmdCPlanePerpObj = New Command(AddressOf CPlanePerpObj)
         End If
         Return m_cmdCPlanePerpObj
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlanePerpObj.  This method is invoked by the CPlanePerpObjCommand.
   ''' </summary>
   Public Sub CPlanePerpObj(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_PERPCURVE)
   End Sub

#End Region ' CPlanePerpObj

#Region "CPlaneObj"

   Private m_bCPlaneObj_IsActive As Boolean = False
   Friend ReadOnly Property bCPlaneObj_IsActive As Boolean
      Get
         Return m_bCPlaneObj_IsActive
      End Get
   End Property
   Friend Sub ResetCPlaneObjIsActive()
      m_bCPlaneObj_IsActive = False
   End Sub
   Private m_PrevSelObjs As New List(Of Integer)
   Friend ReadOnly Property PrevSelObjs As List(Of Integer)
      Get
         Return m_PrevSelObjs
      End Get
   End Property

   ''' <summary>
   ''' Returns a command that do CPlanepObj.
   ''' </summary>
   Public ReadOnly Property CPlaneObj_Command As ICommand
      Get
         If m_cmdCPlaneObj Is Nothing Then
            m_cmdCPlaneObj = New Command(AddressOf CPlaneObj)
         End If
         Return m_cmdCPlaneObj
      End Get
   End Property

   ''' <summary>
   ''' Execute the CPlaneObj.  This method is invoked by the CPlaneObjCommand.
   ''' </summary>
   Public Sub CPlaneObj(ByVal param As Object)
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      ManageInterface(False)
      ' salvo selezione precedente e deseleziono altri oggetti
      m_PrevSelObjs.Clear()
      Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
      While nSelObjId <> GDB_ID.NULL
         m_PrevSelObjs.Add(nSelObjId)
         nSelObjId = EgtGetNextSelectedObj()
      End While
      EgtDeselectAll()
      m_bCPlaneObj_IsActive = True
      Map.refControllerInputPanelVM.ShowMessage("Grid from Selection", "Select the face of the object where to place the grid")
   End Sub

#End Region ' CPlaneObj

#Region "DragMove"

   Public ReadOnly Property DragMove_Command As ICommand
      Get
         If m_cmdDragMove Is Nothing Then
            m_cmdDragMove = New Command(AddressOf DragMove)
         End If
         Return m_cmdDragMove
      End Get
   End Property

   Public Sub DragMove()
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      InitCommand(ShellNumberSelectionTypes.BOTH)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.MOVE)
   End Sub

#End Region    ' DragMove

#Region "DragRotate"

   Public ReadOnly Property DragRotate_Command As ICommand
      Get
         If m_cmdDragRotate Is Nothing Then
            m_cmdDragRotate = New Command(AddressOf DragRotate)
         End If
         Return m_cmdDragRotate
      End Get
   End Property

   Public Sub DragRotate()
      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
      InitCommand(ShellNumberSelectionTypes.BOTH)
      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.ROTATE)
   End Sub

#End Region    ' DragRotate

#End Region    ' COMMANDS

End Class

Public Class ShellNumberEntity
   Inherits VMBase

   Public Enum ShellNumberTypes As Integer
      FROMDRAW = 1
      FROMIMPORT = 2
   End Enum

   Private Shared m_nSharedIndex As Integer = 0
   Private ReadOnly Property nSharedIndex As Integer
      Get
         m_nSharedIndex += 1
         Return m_nSharedIndex
      End Get
   End Property
   Friend Shared Sub ResetSharedIndex()
      m_nSharedIndex = 0
   End Sub

   Private m_Type As ShellNumberTypes
   Public ReadOnly Property Type As ShellNumberTypes
      Get
         Return m_Type
      End Get
   End Property

   Private m_nCurveId As Integer = GDB_ID.NULL
   Public ReadOnly Property nCurveId As Integer
      Get
         Return m_nCurveId
      End Get
   End Property

   Private m_nExtrusionId As Integer = GDB_ID.NULL
   Public ReadOnly Property nExtrusionId As Integer
      Get
         Return m_nExtrusionId
      End Get
   End Property
   Friend Sub SetExtrusionId(nId As Integer)
      m_nExtrusionId = nId
      EgtSetInfo(m_nCurveId, KEY_EXTRUSION_ID, m_nExtrusionId)
   End Sub

   Private m_nIndex As Integer
   Public ReadOnly Property nIndex As Integer
      Get
         Return m_nIndex
      End Get
   End Property

   Public ReadOnly Property ghName As String
      Get
         Return String.Format("[{0}] {1}", {m_nIndex, If(m_Type = ShellNumberTypes.FROMDRAW, "Draw Shell Number", "Import Shell Number")})
      End Get
   End Property

   Sub New(Type As ShellNumberTypes, nId As Integer)
      If Not EgtGetInfo(nId, SHELLNUMBER_ID, m_nIndex) Then
         m_nIndex = ShellNumberPanelVM.GetNextShellNumberIndex()
         EgtSetInfo(nId, SHELLNUMBER_ID, m_nIndex)
      End If
      m_Type = Type
      EgtSetInfo(nId, KEY_SHELLNBR_TYPE, Type)
      Select Case Type
         Case ShellNumberTypes.FROMDRAW
            m_nCurveId = nId
         Case ShellNumberTypes.FROMIMPORT
            m_nExtrusionId = nId
      End Select
   End Sub

End Class