Imports System.Collections.ObjectModel
Imports EgtUILib
Imports EgtWPFLib5

Public Class ImportPanelVM
   Inherits VMBase

   Private m_nImportedPartId As Integer = GDB_ID.NULL
   Friend ReadOnly Property nImportedPartId As Integer
      Get
         Return m_nImportedPartId
      End Get
   End Property

   Private m_ImportedEntityList As New ObservableCollection(Of GeomEntity)
   Public Property ImportedEntityList As ObservableCollection(Of GeomEntity)
      Get
         Return m_ImportedEntityList
      End Get
      Set(value As ObservableCollection(Of GeomEntity))
         m_ImportedEntityList = value
      End Set
   End Property

   Private m_SelImportedEntity As GeomEntity
   Public Property SelImportedEntity As GeomEntity
      Get
         Return m_SelImportedEntity
      End Get
      Set(value As GeomEntity)
         m_SelImportedEntity = value
         EgtDeselectAll()
         If Not IsNothing(m_SelImportedEntity) Then
            EgtSelectObj(m_SelImportedEntity.nId)
         End If
         EgtDraw()
      End Set
   End Property
   Friend Sub SetSelImportedEntity(nId As Integer)
      m_SelImportedEntity = Map.refImportPanelVM.ImportedEntityList.FirstOrDefault(Function(x) x.nId = nId)
      EgtDeselectAll()
      If Not IsNothing(m_SelImportedEntity) Then
            EgtSelectObj(m_SelImportedEntity.nId)
         End If
         EgtDraw()
      NotifyPropertyChanged(NameOf(SelImportedEntity))
   End Sub

   Private m_ImportPartList As New ObservableCollection(Of ImportPart)
   Public ReadOnly Property ImportPartList As ObservableCollection(Of ImportPart)
      Get
         Return m_ImportPartList
      End Get
   End Property

   Private m_SelImportPart As ImportPart
   Friend Sub SetSelImportPart(SelImportPart As ImportPart)
      m_SelImportPart = SelImportPart
      m_SelImportLayer = Nothing
   End Sub
   Public ReadOnly Property SelImportPart As ImportPart
      Get
         Return m_SelImportPart
      End Get
   End Property

   Private m_SelImportLayer As ImportLayer
   Public ReadOnly Property SelImportLayer As ImportLayer
      Get
         Return m_SelImportLayer
      End Get
   End Property
   Friend Sub SetSelImportLayer(SelImportLayer As ImportLayer)
      m_SelImportPart = m_ImportPartList.FirstOrDefault(Function(x) x.LayerList.Contains(SelImportLayer))
      m_SelImportLayer = SelImportLayer
   End Sub

   Private m_SelGeomEntity As GeomEntity
   Public ReadOnly Property SelGeomEntity As GeomEntity
      Get
         Return m_SelGeomEntity
      End Get
   End Property
   Friend Sub SetSelGeomEntity(SelGeomEntity As GeomEntity)
      For Each CurrPart In m_ImportPartList
         Dim CurrLayer As ImportLayer = CurrPart.LayerList.FirstOrDefault(Function(x) x.EntityList.Contains(SelGeomEntity))
         If Not IsNothing(CurrLayer) Then
            m_SelImportPart = CurrPart
            m_SelImportLayer = CurrLayer
            Exit For
         End If
      Next
      m_SelGeomEntity = SelGeomEntity
   End Sub

   ' Definizione comandi
   Private m_cmdSetReference As ICommand
   Private m_cmdAddPart As ICommand
   Private m_cmdRemovePart As ICommand
   Private m_cmdOk As ICommand
   Private m_cmdCancel As ICommand

   Sub New()
      ' Creo riferimento a questa classe in EgtCAM5Map
      Map.SetRefImportPanelVM(Me)
   End Sub

#Region "METHODS"

   Friend Sub Init()
      m_ImportedEntityList.Clear()
      m_ImportPartList.Clear()
      ' aggiungo geometrie importate a lista
      m_nImportedPartId = EgtGetLastPart()
      Dim nLayerId As Integer = EgtGetFirstLayer(m_nImportedPartId)
      Dim nGeometryId As Integer = EgtGetFirstInGroup(nLayerId)
      While nGeometryId <> GDB_ID.NULL
         Dim sGeometryName As String = ""
         EgtGetName(nGeometryId, sGeometryName)
         m_ImportedEntityList.Add(New GeomEntity(nGeometryId, sGeometryName))
         nGeometryId = EgtGetNext(nGeometryId)
      End While
      ' aggiungo primo pezzo
      m_ImportPartList.Add(New ImportPart())
      m_ImportPartList(0).LayerList.FirstOrDefault(Function(x) x.Type = ImportLayer.LayerType.PRINT_SOLID).bIsSelected = True
   End Sub

#End Region    ' METHODS

#Region "COMMANDS"

#Region "SetReference"

   Public ReadOnly Property SetReference_Command As ICommand
      Get
         If m_cmdSetReference Is Nothing Then
            m_cmdSetReference = New Command(AddressOf SetReference)
         End If
         Return m_cmdSetReference
      End Get
   End Property

   Public Sub SetReference()
      If Not IsNothing(SelGeomEntity) Then
         Dim ChooseReferenceWndVM As New ChooseReferenceWndVM
         Dim ChooseReferenceWndV As New ChooseReferenceWndV(Application.Current.MainWindow, ChooseReferenceWndVM)
         If Not ChooseReferenceWndV.ShowDialog() Then Return
         SelGeomEntity.Reference = ChooseReferenceWndVM.SelReference
      End If
   End Sub

#End Region    ' SetReference

#Region "AddPart"

   Public ReadOnly Property AddPart_Command As ICommand
      Get
         If m_cmdAddPart Is Nothing Then
            m_cmdAddPart = New Command(AddressOf AddPart)
         End If
         Return m_cmdAddPart
      End Get
   End Property

   Public Sub AddPart()
      m_ImportPartList.Add(New ImportPart)
   End Sub

#End Region    ' AddPart

#Region "RemovePart"

   Public ReadOnly Property RemovePart_Command As ICommand
      Get
         If m_cmdRemovePart Is Nothing Then
            m_cmdRemovePart = New Command(AddressOf RemovePart)
         End If
         Return m_cmdRemovePart
      End Get
   End Property

   Public Sub RemovePart()
      If IsNothing(SelImportLayer) Then
         ' rimuovo pezzo
         m_ImportPartList.Remove(SelImportPart)
      Else
         ' rimuovo geometria
         Dim CurrEntity As GeomEntity = m_SelGeomEntity
         SelImportLayer.EntityList.Remove(m_SelGeomEntity)
         ' la rimetto in lista importati
         ImportedEntityList.Add(CurrEntity)
      End If
   End Sub

#End Region    ' RemovePart

#Region "Ok"

   Public ReadOnly Property Ok_Command As ICommand
      Get
         If m_cmdOk Is Nothing Then
            m_cmdOk = New Command(AddressOf Ok)
         End If
         Return m_cmdOk
      End Get
   End Property

   Public Sub Ok()
      Dim sErr As New List(Of String)
      ' verifico che tutti i pezzi abbiano una superficie da stampare nel layer apposito
      For Each CurrPart In m_ImportPartList
         For Each CurrLayer In CurrPart.LayerList
            Select Case CurrLayer.Type
               Case ImportLayer.LayerType.PRINT_SOLID
                  If CurrLayer.EntityList.Count = 0 Then
                     If sErr.Count > 0 Then sErr(sErr.Count - 1) &= Environment.NewLine
                     sErr.Add(CurrPart.ghName & " - No print surface defined!")
                  End If
            End Select
         Next
      Next
      If sErr.Count > 0 Then
         MessageBox.Show(String.Concat(sErr), "Error")
         Return
      Else
         ' Creo pezzi e layer necessari
         For Each ImportPart In m_ImportPartList
            Dim frImportedPart As New Frame3d
            EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
            Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT, frImportedPart)
            EgtSetName(nPartId, PART)
            Dim nFrameId As Integer = GDB_ID.NULL
            Dim b3PrintSolid As New BBox3d
            Dim nPrintPartLayerId As Integer = GDB_ID.NULL
            Dim PrintSolidEntity As GeomEntity = Nothing
            Dim nOriginalPartLayerId As Integer = GDB_ID.NULL
            Dim nRibsLayerId As Integer = GDB_ID.NULL
            Dim nShellNumberLayerId As Integer = GDB_ID.NULL
            Dim nAuxSolidsLayerId As Integer = GDB_ID.NULL
            Dim nMachStartLayerId As Integer = GDB_ID.NULL
            For Each ImportLayer In ImportPart.LayerList
               Select Case ImportLayer.Type
                  Case ImportLayer.LayerType.PRINT_SOLID
                     nPrintPartLayerId = EgtCreateGroup(nPartId)
                     EgtSetName(nPrintPartLayerId, PRINT_SOLID)
                     If ImportLayer.EntityList.Count > 0 Then
                        PrintSolidEntity = ImportLayer.EntityList(0)
                        EgtRelocateGlob(PrintSolidEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
                        ' calcolo box superficie per creazione riferimento
                        EgtGetBBoxGlob(PrintSolidEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
                     End If
                     'Case ImportLayer.LayerType.ORIGINAL_SOLID
                     '   nOriginalPartLayerId = EgtCreateGroup(nPartId)
                     '   EgtSetName(nOriginalPartLayerId, ORIGINAL_SOLID)
                     '   For Each GeomEntity In ImportLayer.EntityList
                     '      EgtRelocateGlob(GeomEntity.nId, nOriginalPartLayerId, GDB_POS.LAST_SON)
                     '   Next
                  Case ImportLayer.LayerType.MACH_START
                     nMachStartLayerId = EgtCreateGroup(nPartId)
                     EgtSetName(nMachStartLayerId, LAY_MACH_START)
                     Dim nMachStartId As Integer = GDB_ID.NULL
                     If ImportLayer.EntityList.Count > 0 Then
                        For Each GeomEntity In ImportLayer.EntityList
                           ' se punto o curva compo
                           Dim EntityType As GDB_TY = EgtGetType(GeomEntity.nId)
                           Select Case EntityType
                              Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO
                                 ' gli cambio layer
                                 EgtRelocateGlob(GeomEntity.nId, nMachStartLayerId, GDB_POS.LAST_SON)
                                 nMachStartId = GeomEntity.nId
                              Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
                                 ' altrimenti la trasformo in curva compo
                                 nMachStartId = EgtCreateCurveCompo(nMachStartLayerId, GeomEntity.nId, True)
                           End Select
                           EgtSetName(nMachStartId, START_GEOM)
                           ' coloro l'entita' di rosso
                           Dim c3Red As Color3d
                           c3Red.FromColor(System.Drawing.Color.Red)
                           EgtSetColor(nMachStartId, c3Red)
                        Next
                     Else
                        ' creo punto di partenza
                        Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
                        nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
                        EgtSetName(nMachStartId, START_GEOM)
                        ' coloro l'entita' di rosso
                        Dim c3Red As Color3d
                        c3Red.FromColor(System.Drawing.Color.Red)
                        EgtSetColor(nMachStartId, c3Red)
                     End If
                  Case ImportLayer.LayerType.RIBS
                     nRibsLayerId = EgtCreateGroup(nPartId)
                     EgtSetName(nRibsLayerId, LAY_RIBS)
                     For Each GeomEntity In ImportLayer.EntityList
                        EgtSetInfo(GeomEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
                        EgtRelocateGlob(GeomEntity.nId, nRibsLayerId, GDB_POS.LAST_SON)
                        ' coloro l'entita' di viola
                        Dim c3LightBlue As Color3d
                        c3LightBlue.FromColor(System.Drawing.Color.MediumOrchid)
                        EgtSetColor(GeomEntity.nId, c3LightBlue)
                     Next
                  Case ImportLayer.LayerType.SHELL_NUMBER
                     nShellNumberLayerId = EgtCreateGroup(nPartId)
                     EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
                     For Each GeomEntity In ImportLayer.EntityList
                        EgtSetInfo(GeomEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
                        EgtRelocateGlob(GeomEntity.nId, nShellNumberLayerId, GDB_POS.LAST_SON)
                        ' coloro l'entita' di verde
                        Dim c3LightBlue As Color3d
                        c3LightBlue.FromColor(System.Drawing.Color.Lime)
                        EgtSetColor(GeomEntity.nId, c3LightBlue)
                     Next
                  Case ImportLayer.LayerType.AUX_SOLIDS
                     nAuxSolidsLayerId = EgtCreateGroup(nPartId)
                     EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
                     For Each GeomEntity In ImportLayer.EntityList
                        EgtSetInfo(GeomEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
                        EgtRelocateGlob(GeomEntity.nId, nAuxSolidsLayerId, GDB_POS.LAST_SON)
                        ' coloro l'entita' di oro
                        Dim c3LightBlue As Color3d
                        c3LightBlue.FromColor(System.Drawing.Color.DarkGoldenrod)
                        EgtSetColor(GeomEntity.nId, c3LightBlue)
                     Next
                  Case ImportLayer.LayerType.OTHERS
                     Dim nOthersLayerId As Integer = EgtCreateGroup(nPartId)
                     EgtSetName(nOthersLayerId, LAY_OTHERS)
                     For Each GeomEntity In ImportLayer.EntityList
                        EgtRelocateGlob(GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
                     Next
               End Select
            Next
            ' aggiungo riferimento
            Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
            EgtSetName(nReferenceLayerId, LAY_REFERENCE)
            ' Creo riferimento 
            Dim ptOrig As New Point3d(b3PrintSolid.Min())
            Select Case PrintSolidEntity.Reference
               Case ChooseReferenceWndVM.References.TL
                  ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX
               Case ChooseReferenceWndVM.References.TR
                  ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX + b3PrintSolid.DimX() * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.BL
               Case ChooseReferenceWndVM.References.BR
                  ptOrig += b3PrintSolid.DimX() * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.TC
                  ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.ML
                  ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX
               Case ChooseReferenceWndVM.References.MR
                  ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.TC
                  ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.MR
                  ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.BC
                  ptOrig += b3PrintSolid.DimX() / 2 * Vector3d.X_AX
               Case ChooseReferenceWndVM.References.MC
                  ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
            End Select
            Dim frPrintSolid As New Frame3d(ptOrig)
            nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
            If nFrameId Then
               EgtSetName(nFrameId, FRAME_PART)
               EgtSetMode(nFrameId, GDB_MD.LOCKED)
            End If
            EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, PrintSolidEntity.Reference)
            ' appoggio il pezzo sulla tavola
            EgtMove( nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
            ' lo aggiungo a lista pezzi 
            Dim sFilePath As String = ""
            EgtGetInfo(m_nImportedPartId, FILE_PATH, sFilePath)
            EgtSetInfo(nPartId, FILE_PATH, sFilePath)
            EgtSetInfo(nPartId, "PartOnTable", 1)
            Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, PrintSolidEntity.nId, nOriginalPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, sFilePath)
            Map.refTopPanelVM.PartList.Add(NewPart)
         Next
      End If
      'EgtAddMachGroup("3dPrint")
      'EgtSetTable("Tab")

      'Dim nRawId As Integer = EgtAddRawPart(b3PrintSolid.Min, b3PrintSolid.DimX, b3PrintSolid.DimY, b3PrintSolid.DimZ, New Color3d(128, 128, 128, 30))
      'EgtAddPartToRawPart(nPartId, b3PrintSolid.Min, nRawId)
      'EgtMoveToCornerRawPart(nRawId, New Point3d(dPosX, dPosY, 0), MCH_CR.BL)

      'EgtResetCurrMachGroup()

      ' seleziono ultimo pezzo aggiunto
      Map.refTopPanelVM.SelLastPart()
      ' elimino vecchio pezzo d'importazione
      EgtErase(m_nImportedPartId)

      EgtDraw()
      ' ripristino modalita' standard
      Map.refTopPanelVM.SelPage = Pages.MODIFY
   End Sub

#End Region    ' Ok

#Region "Cancel"

   Public ReadOnly Property Cancel_Command As ICommand
      Get
         If m_cmdCancel Is Nothing Then
            m_cmdCancel = New Command(AddressOf Cancel)
         End If
         Return m_cmdCancel
      End Get
   End Property

   Public Sub Cancel()
      ' elimino pezzo importato
      EgtErase(m_nImportedPartId)
      EgtDraw()
      ' se ci sono pezzi
      If Map.refTopPanelVM.PartList.Count > 0 Then
         ' ripristino modalita' standard
         Map.refTopPanelVM.SelPage = Pages.MODIFY
      Else
         Map.refTopPanelVM.SelPage = Pages.NULL
      End If
   End Sub

#End Region    ' Cancel

#End Region    ' COMMANDS

End Class