Imports EgtUILib
Imports EgtWPFLib5

Public Class SliderManagerVM
   Inherits VMBase

#Region "FIELDS & PROPERTIES"

   Public Enum ViewSliderType As Integer
      NULL = 0
      ONLY_SELECTED = 1
      UNTIL_SELECTED = 2
      FROM_SELECTED = 3
   End Enum

   Private m_nLayerIndex As Integer = 0
   Public Property nLayerIndex As Integer
      Get
         Return m_nLayerIndex
      End Get
      Set(value As Integer)
         If IsNothing(Map.refTopPanelVM.SelPart) Then Return
         Select Case m_nSelViewSlider
            Case ViewSliderType.ONLY_SELECTED
               ' se diverso da nullo nascondo precedente
               If Not IsNothing(Map.refTopPanelVM.SelPart) Then
                  ' riporto vecchio strato a visualizzazione di tutti i solidi
                  If m_nLayerIndex > 0 Then dLayerAdvancement = 100
                  If m_nLayerIndex = 0 Then
                     For Each Layer In Map.refTopPanelVM.SelPart.LayerList
                        EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
                     Next
                  ElseIf m_nLayerIndex > 0 Then
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.OFF)
                  End If
               End If
               m_nLayerIndex = value
               ' se diverso da nullo visualizzo corrente
               If Not IsNothing(Map.refTopPanelVM.SelPart) AndAlso m_nLayerIndex > 0 Then EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.ON_)
               ' porto barra nuovo strato a 100 
               If m_nLayerIndex > 0 Then SetLayerAdvancement(100)
            Case ViewSliderType.UNTIL_SELECTED
               Dim LayerIndex As Integer = If(m_nLayerIndex > 0, m_nLayerIndex, 1)
               If value > m_nLayerIndex Then
                  For Index = LayerIndex + 1 To value
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(Index - 1).nLayerId, GDB_ST.ON_)
                  Next
               ElseIf value < m_nLayerIndex Then
                  For Index = value + 1 To LayerIndex
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(Index - 1).nLayerId, GDB_ST.OFF)
                  Next
               End If
               m_nLayerIndex = value
            Case ViewSliderType.FROM_SELECTED
               Dim LayerIndex As Integer = If(m_nLayerIndex > 0, m_nLayerIndex, 1)
               If value > m_nLayerIndex Then
                  For Index = LayerIndex To value
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(Index - 1).nLayerId, GDB_ST.OFF)
                  Next
               ElseIf value < m_nLayerIndex Then
                  For Index = value To LayerIndex
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(Index - 1).nLayerId, GDB_ST.ON_)
                  Next
               End If
               m_nLayerIndex = value
         End Select
         NotifyPropertyChanged(NameOf(ghShowValue))
         EgtDraw()
      End Set
   End Property
   Private Sub SetLayerIndex(value As Integer)
      Select Case m_nSelViewSlider
         Case ViewSliderType.ONLY_SELECTED
            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
               ' riporto vecchio strato a visualizzazione di tutti i solidi
               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
                  If nLayerInd = value - 1 Then
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
                  Else
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
                  End If
               Next
            End If
            m_nLayerIndex = value
            NotifyPropertyChanged(NameOf(ghShowValue))
            EgtDraw()
         Case ViewSliderType.UNTIL_SELECTED
            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
               ' riporto vecchio strato a visualizzazione di tutti i solidi
               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
                  If nLayerInd <= value - 1 Then
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
                  Else
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
                  End If
               Next
            End If
            m_nLayerIndex = value
            NotifyPropertyChanged(NameOf(ghShowValue))
            EgtDraw()
         Case ViewSliderType.FROM_SELECTED
            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
               ' riporto vecchio strato a visualizzazione di tutti i solidi
               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
                  If nLayerInd >= value - 1 Then
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
                  Else
                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
                  End If
               Next
            End If
            m_nLayerIndex = value
            NotifyPropertyChanged(NameOf(ghShowValue))
            EgtDraw()
      End Select
      NotifyPropertyChanged(NameOf(nLayerIndex))
   End Sub

   Public ReadOnly Property ghShowValue As String
      Get
         Dim dH As Double = 0
         If Not IsNothing(Map.refTopPanelVM.CurrMachining) Then
            If Map.refTopPanelVM.CurrMachining.dCurrSlicingType = Machining.MPAR_SLICINGTYPE.DEG45 Then
               Return m_nLayerIndex
            Else
               Return m_nLayerIndex & " (" & DoubleToString(m_nLayerIndex * Map.refTopPanelVM.CurrMachining.dCurrStrandH, 0) & "mm)"
            End If
         Else
            Return m_nLayerIndex
         End If
      End Get
   End Property

   Public ReadOnly Property ghShowMaximum As String
      Get
         Dim dH As Double = 0
         If Not IsNothing(Map.refTopPanelVM.CurrMachining) Then
            If Map.refTopPanelVM.CurrMachining.dCurrSlicingType = Machining.MPAR_SLICINGTYPE.DEG45 Then
               Return m_nLayerIndex_Maximum
            Else
               Return m_nLayerIndex_Maximum & " (" & DoubleToString(m_nLayerIndex_Maximum * Map.refTopPanelVM.CurrMachining.dCurrStrandH, 0) & "mm)"
            End If
         Else
            Return m_nLayerIndex_Maximum
         End If
      End Get
   End Property

   Private m_dLayerAdvancement As Double
   Public Property dLayerAdvancement As Double
      Get
         Return m_dLayerAdvancement
      End Get
      Set(value As Double)
         Select Case m_nSelViewSlider
            Case ViewSliderType.ONLY_SELECTED
               Dim nTotSolid As Integer = 0
               For Each nLayerId In Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).SolidLayerIdList
                  nTotSolid += EgtGetGroupObjs(nLayerId)
               Next
               Dim nTotToolPath As Integer = 0
               For Each nLayerId In Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).ToolPathLayerIdList
                  nTotToolPath += EgtGetGroupObjs(nLayerId)
               Next
               Dim nOldSolidAdvancement As Integer = Math.Ceiling(nTotSolid * m_dLayerAdvancement / 100)
               Dim nNewSolidAdvancement As Integer = Math.Ceiling(nTotSolid * value / 100)
               If nNewSolidAdvancement <> nOldSolidAdvancement Then
                  Dim nIndex As Integer = 0
                  For nSolidLayerIndex = 0 To Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).SolidLayerIdList.Count - 1
                     Dim nId As Integer = EgtGetFirstInGroup(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).SolidLayerIdList(nSolidLayerIndex))
                     While nId <> GDB_ID.NULL
                        nIndex += 1
                        If nIndex <= nNewSolidAdvancement Then
                           EgtSetStatus(nId, GDB_ST.ON_)
                        Else
                           EgtSetStatus(nId, GDB_ST.OFF)
                        End If
                        nId = EgtGetNext(nId)
                     End While
                  Next
               End If
               Dim nOldToolPathAdvancement As Integer = Math.Ceiling(nTotToolPath * m_dLayerAdvancement / 100)
               Dim nNewToolPathAdvancement As Integer = Math.Ceiling(nTotToolPath * value / 100)
               If nNewToolPathAdvancement <> nOldToolPathAdvancement Then
                  Dim nIndex As Integer = 0
                  For nToolPathLayerIndex = 0 To Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).ToolPathLayerIdList.Count - 1
                     Dim nId As Integer = EgtGetFirstInGroup(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).ToolPathLayerIdList(nToolPathLayerIndex))
                     While nId <> GDB_ID.NULL
                        nIndex += 1
                        If nIndex <= nNewToolPathAdvancement Then
                           EgtSetStatus(nId, GDB_ST.ON_)
                        Else
                           EgtSetStatus(nId, GDB_ST.OFF)
                        End If
                        nId = EgtGetNext(nId)
                     End While
                  Next
               End If
               m_dLayerAdvancement = value
         End Select
         EgtDraw()
      End Set
   End Property
   Friend Sub SetLayerAdvancement(value As Double)
      m_dLayerAdvancement = value
      NotifyPropertyChanged(NameOf(dLayerAdvancement))
   End Sub

   Private m_LayerIndex_Visibility As Visibility = Visibility.Collapsed
   Public Property LayerIndex_Visibility As Visibility
      Get
         Return m_LayerIndex_Visibility
      End Get
      Set(value As Visibility)
         m_LayerIndex_Visibility = value
      End Set
   End Property

   Private m_LayerAdvancement_Visibility As Visibility = Visibility.Collapsed
   Public Property LayerAdvancement_Visibility As Visibility
      Get
         Return m_LayerAdvancement_Visibility
      End Get
      Set(value As Visibility)
         m_LayerAdvancement_Visibility = value
      End Set
   End Property

   Private m_LayerIndex_IsEnabled As Boolean = True
   Public ReadOnly Property LayerIndex_IsEnabled As Boolean
      Get
         Return m_LayerIndex_IsEnabled
      End Get
   End Property
   Friend Sub SetLayerIndexIsEnabled(value As Boolean)
      m_LayerIndex_IsEnabled = value
      NotifyPropertyChanged(NameOf(LayerIndex_IsEnabled))
   End Sub

   Private m_LayerAdvancement_IsEnabled As Boolean = True
   Public ReadOnly Property LayerAdvancement_IsEnabled As Boolean
      Get
         Return m_LayerAdvancement_IsEnabled
      End Get
   End Property
   Friend Sub SetLayerAdvancementIsEnabled(value As Boolean)
      m_LayerAdvancement_IsEnabled = value
      NotifyPropertyChanged(NameOf(LayerAdvancement_IsEnabled))
   End Sub

   Private m_nLayerIndex_Minimum As Double
   Public Property nLayerIndex_Minimum As Double
      Get
         Return m_nLayerIndex_Minimum
      End Get
      Set(value As Double)
         m_nLayerIndex_Minimum = value
      End Set
   End Property

   Private m_nLayerIndex_Maximum As Double
   Public Property nLayerIndex_Maximum As Double
      Get
         Return m_nLayerIndex_Maximum
      End Get
      Set(value As Double)
         m_nLayerIndex_Maximum = value
      End Set
   End Property

   Private m_ViewSliderList As New List(Of String)({"Only Selected", "Till Selected", "From Selected"})
   Public ReadOnly Property ViewSliderList As List(Of String)
      Get
         Return m_ViewSliderList
      End Get
   End Property

   Private m_nSelViewSlider As ViewSliderType
   Public Property ghSelViewSlider As Integer
      Get
         Return m_nSelViewSlider - 1
      End Get
      Set(value As Integer)
         m_nSelViewSlider = value + 1
         WriteMainPrivateProfileString(S_PRINTING3D, K_VIEWSLIDER, m_nSelViewSlider)
         ' ciclo tutti i layer per nasconderli/mostrarli
         If IsNothing(Map.refTopPanelVM.SelPart) OrElse IsNothing(Map.refTopPanelVM.SelPart.LayerList) Then Return
         Select Case m_nSelViewSlider
            Case ViewSliderType.ONLY_SELECTED
               For Each Layer In Map.refTopPanelVM.SelPart.LayerList
                  If Layer.nLayerIndex = m_nLayerIndex Then
                     EgtSetStatus(Layer.nLayerId, GDB_ST.ON_)
                  Else
                     EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
                  End If
               Next
            Case ViewSliderType.UNTIL_SELECTED
               For Each Layer In Map.refTopPanelVM.SelPart.LayerList
                  If Layer.nLayerIndex <= m_nLayerIndex Then
                     EgtSetStatus(Layer.nLayerId, GDB_ST.ON_)
                  Else
                     EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
                  End If
               Next
            Case ViewSliderType.FROM_SELECTED
               For Each Layer In Map.refTopPanelVM.SelPart.LayerList
                  If Layer.nLayerIndex >= m_nLayerIndex Then
                     EgtSetStatus(Layer.nLayerId, GDB_ST.ON_)
                  Else
                     EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
                  End If
               Next
         End Select
         ' mostro/nascondo slider orizzontale
         m_LayerAdvancement_Visibility = If(m_nSelViewSlider = ViewSliderType.ONLY_SELECTED, Visibility.Visible, Visibility.Collapsed)
         NotifyPropertyChanged(NameOf(LayerAdvancement_Visibility))
         EgtDraw()
      End Set
   End Property
   Friend Sub SetSelViewSlider(value As ViewSliderType)
      m_nSelViewSlider = value
      NotifyPropertyChanged(NameOf(ghSelViewSlider))
   End Sub

#End Region    ' FIELDS & PROPERTIES

#Region "CONSTRUCTOR"

   Sub New()
      ' Creo riferimento a questa classe in Map
      Map.SetRefSliderManagerVM(Me)
      ' leggo valore default  ViewSlider
      Dim nViewSlider As Integer = GetMainPrivateProfileInt(S_PRINTING3D, K_VIEWSLIDER, 1)
      SetSelViewSlider(nViewSlider)
   End Sub

#End Region    ' CONSTRUCTOR

#Region "METHODS"

   Friend Sub SetSliderVisibility(bValue As Boolean)
      Dim Visibility As Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
      m_LayerIndex_Visibility = Visibility
      NotifyPropertyChanged(NameOf(LayerIndex_Visibility))
   End Sub

   Friend Sub RefreshSlider(nMin As Integer, nMax As Integer)
      m_nLayerIndex_Minimum = nMin
      m_nLayerIndex_Maximum = nMax
      NotifyPropertyChanged(NameOf(nLayerIndex_Minimum))
      NotifyPropertyChanged(NameOf(nLayerIndex_Maximum))
      NotifyPropertyChanged(NameOf(ghShowMaximum))
      SetLayerIndex(m_nLayerIndex)
   End Sub

   Friend Sub SetLayerIndexToMax()
      SetLayerIndex(m_nLayerIndex_Maximum)
      NotifyPropertyChanged(NameOf(nLayerIndex))
   End Sub

   Friend Sub SetLayerIndexToMin()
      SetLayerIndex(m_nLayerIndex_Minimum)
      NotifyPropertyChanged(NameOf(nLayerIndex))
   End Sub

   Friend Sub SetLayerIndexToZero()
      SetLayerIndex(0)
      NotifyPropertyChanged(NameOf(nLayerIndex))
   End Sub

#End Region    ' METHODS

End Class