Imports System.Collections.ObjectModel
Imports System.IO
Imports EgtUILib
Imports EgtWPFLib5

Public Class SimulationPanelVM
   Inherits VMBase

#Region "FIELDS & PROPERTIES"

   Public Enum MachViews As Integer
      TOOL = 0
      HEAD = 1
      MACHINE = 2
   End Enum

   Private m_dPrevAngVertDegView As Double
   Private m_dPrevAngHorizDegView As Double

   Private m_MySimul As MySimulation
   Public Property MySimul As MySimulation
      Get
         Return m_MySimul
      End Get
      Set(value As MySimulation)
         m_MySimul = value
         NotifyPropertyChanged("MySimul")
      End Set
   End Property

   Private m_MachViewList As New List(Of String)({"Tool", "Head", "Machine"})
   Public ReadOnly Property MachViewList As List(Of String)
      Get
         Return m_MachViewList
      End Get
   End Property

   Private m_nSelMachView As MachViews
   Public Property nSelMachView As Integer
      Get
         Return m_nSelMachView
      End Get
      Set(value As Integer)
         m_nSelMachView = value
         Select Case m_nSelMachView
            Case MachViews.TOOL
               ToolMode()
            Case MachViews.HEAD
               HeadMode()
            Case MachViews.MACHINE
               MachMode()
         End Select
      End Set
   End Property
   Friend Sub SetSelMachView(value As MachViews)
      nSelMachView = value
      NotifyPropertyChanged(NameOf(nSelMachView))
   End Sub

   ' Definizione comandi
   Private m_cmdOk As ICommand
   Private m_cmdToolMode As ICommand
   Private m_cmdHeadMode As ICommand
   Private m_cmdMachMode As ICommand

#Region "Messages"

   Public ReadOnly Property MachViewMsg As String
      Get
         Return "View"
      End Get
   End Property

#End Region    ' Messages

#Region "ToolTip"

   Public ReadOnly Property OneStepToolTip As String
      Get
         Return EgtMsg(MSG_SIMULATION + 8)
      End Get
   End Property
   Public ReadOnly Property PlayPauseToolTip As String
      Get
         Return EgtMsg(MSG_SIMULATION + 9)
      End Get
   End Property
   Public ReadOnly Property StopHomeToolTip As String
      Get
         Return EgtMsg(MSG_SIMULATION + 10)
      End Get
   End Property

#End Region    ' ToolTip

#End Region    ' FIELDS & PROPERTIES

#Region "CONSTRUCTOR"

   Sub New()
      ' Creo riferimento a questa classe in OmagOFFICEMap
      Map.SetRefSimulationPanelVM(Me)
      MySimul = New MySimulation
      ' leggo vista macchina da ini e la imposto
      SetSelMachView(MachViews.MACHINE)
   End Sub

#End Region    ' CONSTRUCTOR

#Region "METHODS"

   Friend Sub Refresh(PrevMeasureUnit As MeasureUnitOpt)

   End Sub

   Friend Sub InitSimulation()
      ' Deseleziono tutto
      EgtDeselectAll()
      ' Costringo ad aggiornare UI
      UpdateUI()
      ' Disabilito impostazione modificato
      EgtDisableModified()
      ' Imposto prima fase
      EgtSetCurrPhase(1)
      ' Costringo ad aggiornare UI
      UpdateUI()
      'Cambio la vista della scena
      EgtGetGenericView(m_dPrevAngVertDegView, m_dPrevAngHorizDegView)
      EgtSetView(VT.ISO_SW, False)
      MySimul.SetMachLook(MCH_LOOK.ALL)
      EgtSetMachineLook(MySimul.GetMachLook())
      ' Nascondo griglia
      EgtSetGridShow(False, False)
      EgtZoom(ZM.ALL)
      ' Avvio ambiente di simulazione
      If Not EgtSimInit() OrElse Not EgtSimStart() Then
         If EgtGetLastMachMgrErrorId() <> 0 Then
            Dim sErr As String = EgtGetLastMachMgrErrorString()
            MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)
         Else
            MessageBox.Show(EgtMsg(MSG_MESSAGEBOX + 10), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
         End If
      End If
      ' Imposto stato corrente
      MySimul.SetSimulationStatus(MCH_SIM_ST.UI_STOP)
      MySimul.SetShowPlay(True)
      MySimul.SetSliderX(GetMainPrivateProfileDouble(S_SIMUL, K_SLIDERX, 1))
      Dim SliderVal As Double = GetMainPrivateProfileDouble(S_SIMUL, K_SLIDERVAL, 10)
      MySimul.SliderValue = SliderVal
      MySimul.ShowCncData()
      MySimul.StatusMsg = EgtMsg(MSG_SIMULATIONPAGEUC + 14)   ' Home
      ' nascondo slider strati e layer da visualizzare
      Map.refSliderManagerVM.SetSliderVisibility(False)
      Map.refViewLayerManagerVM.SetViewLayerManagerVisibility(False)
      ' disattivo comandi progetto
      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(False)
      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
      Map.refInstrumentPanelVM.SetEdgeAnalysisIsEnabled(False)
   End Sub

   Private Function LoadCurrTools() As Boolean
      '' Se macchina con cambio utensile non devo fare alcunché
      'If CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
      '   Return True
      'End If
      '' Imposto la lama corrente
      'Dim sSaw As String = CurrentMachine.sCurrSaw
      'If Not EgtLoadTool("H1", 1, sSaw) Then
      '   Return False
      'End If
      '' Imposto eventuale secondo utensile montato
      'If CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Then
      '   Dim sTool As String = CurrentMachine.sCurrDrill
      '   If String.IsNullOrEmpty(sTool) Then sTool = CurrentMachine.sCurrMill
      '   If Not String.IsNullOrEmpty(sTool) AndAlso Not EgtLoadTool("H1", 2, sTool) Then
      '      Return False
      '   End If
      'End If
      Return True
   End Function

   Friend Sub ExitSimulation()
      Map.refMyStatusBarVM.ClearOutputMessage()
      ' Mi assicuro di terminare la simulazione
      MySimul.ResetSimulation()
      ' Ripristino visibilità standard
      MySimul.SetMachLook(MCH_LOOK.TAB)
      EgtSetMachineLook(MySimul.GetMachLook())
      '' Nascondo tutte le lavorazioni
      'CamAuto.HideAllMachinings()
      ' Abilito impostazione modificato
      EgtEnableModified()
      ' Ripristino vista griglia
      EgtSetGridShow(True, True)
      ' Cambio la vista della scena
      EgtSetGenericView(m_dPrevAngVertDegView, m_dPrevAngHorizDegView, False)
      EgtZoom(ZM.ALL)
      ' mostro slider strati e layer da visualizzare
      Map.refSliderManagerVM.SetSliderVisibility(True)
      Map.refViewLayerManagerVM.SetViewLayerManagerVisibility(True)
      ' disattivo comandi progetto
      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(True)
      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
      Map.refInstrumentPanelVM.SetEdgeAnalysisIsEnabled(True)
   End Sub

#End Region    ' METHODS

#Region "COMMANDS"

#Region "Ok"

   Public ReadOnly Property Ok_Command As ICommand
      Get
         If m_cmdOk Is Nothing Then
            m_cmdOk = New Command(AddressOf Ok)
         End If
         Return m_cmdOk
      End Get
   End Property

   Public Sub Ok()
      ' reset gruppo
      EgtResetCurrMachGroup()
      ' eseguo script di uscita da gruppo corrente
      Map.refSliceManagerVM.ExecExitMachScript()
      ' ripristino modalita' standard
      Map.refTopPanelVM.SelPage = Pages.SLICE
   End Sub

#End Region    ' Ok

#Region "ToolModeCommand"

   ''' <summary>
   ''' Returns a command that create a new tool.
   ''' </summary>
   Public ReadOnly Property ToolModeCommand As ICommand
      Get
         If m_cmdToolMode Is Nothing Then
            m_cmdToolMode = New Command(AddressOf ToolMode)
         End If
         Return m_cmdToolMode
      End Get
   End Property

   ''' <summary>
   ''' Creata the new tool.  This method is invoked by the NewCommand.
   ''' </summary>
   Public Sub ToolMode()
      ' aggiorno lo stato
      If MySimul.GetMachLook() <> MCH_LOOK.TAB_TOOL Then
         MySimul.SetMachLook(MCH_LOOK.TAB_TOOL)
      End If
      ' aggiorno lo stato della macchina e la sua visualizzazione
      EgtSetMachineLook(MySimul.GetMachLook())
      EgtDraw()
   End Sub

#End Region ' ToolModeCommand

#Region "HeadModeCommand"

   ''' <summary>
   ''' Returns a command that create a new tool.
   ''' </summary>
   Public ReadOnly Property HeadModeCommand As ICommand
      Get
         If m_cmdHeadMode Is Nothing Then
            m_cmdHeadMode = New Command(AddressOf HeadMode)
         End If
         Return m_cmdHeadMode
      End Get
   End Property

   ''' <summary>
   ''' Creata the new tool.  This method is invoked by the NewCommand.
   ''' </summary>
   Public Sub HeadMode()
      ' aggiorno lo stato
      If MySimul.GetMachLook() <> MCH_LOOK.TAB_HEAD Then
         MySimul.SetMachLook(MCH_LOOK.TAB_HEAD)
      End If
      ' aggiorno lo stato della macchina e la sua visualizzazione
      EgtSetMachineLook(MySimul.GetMachLook())
      EgtDraw()
   End Sub

#End Region ' HeadModeCommand

#Region "MachModeCommand"

   ''' <summary>
   ''' Returns a command that create a new tool.
   ''' </summary>
   Public ReadOnly Property MachModeCommand As ICommand
      Get
         If m_cmdMachMode Is Nothing Then
            m_cmdMachMode = New Command(AddressOf MachMode)
         End If
         Return m_cmdMachMode
      End Get
   End Property

   ''' <summary>
   ''' Creata the new tool.  This method is invoked by the NewCommand.
   ''' </summary>
   Public Sub MachMode()
      ' aggiorno lo stato
      If MySimul.GetMachLook() <> MCH_LOOK.ALL Then
         MySimul.SetMachLook(MCH_LOOK.ALL)
      End If
      ' aggiorno lo stato della macchina e la sua visualizzazione
      EgtSetMachineLook(MySimul.GetMachLook())
      EgtDraw()
   End Sub

#End Region ' MachModeCommand

#End Region    ' COMMANDS

End Class