Imports System.Collections.ObjectModel
Imports EgtUILib
Imports EgtWPFLib5

Public Class ManagePartPanelVM
   Inherits VMBase

   Public Enum ManagePartType
      IMPORT = 1
      MODIFY = 2
   End Enum

   Private m_Type As ManagePartType
   Friend ReadOnly Property Type As ManagePartType
      Get
         Return m_Type
      End Get
   End Property

   Private m_nImportedPartId As Integer = GDB_ID.NULL
   Friend ReadOnly Property nImportedPartId As Integer
      Get
         Return m_nImportedPartId
      End Get
   End Property

   Private m_ImportedEntityList As New ObservableCollection(Of PartManager_GeomEntity)
   Public Property ImportedEntityList As ObservableCollection(Of PartManager_GeomEntity)
      Get
         Return m_ImportedEntityList
      End Get
      Set(value As ObservableCollection(Of PartManager_GeomEntity))
         m_ImportedEntityList = value
      End Set
   End Property

   Private m_SelImportedEntity As PartManager_GeomEntity
   Public Property SelImportedEntity As PartManager_GeomEntity
      Get
         Return m_SelImportedEntity
      End Get
      Set(value As PartManager_GeomEntity)
         m_SelImportedEntity = value
         EgtDeselectAll()
         If Not IsNothing(m_SelImportedEntity) Then
            EgtSelectObj(m_SelImportedEntity.nId)
         End If
         EgtDraw()
      End Set
   End Property
   Friend Sub SetSelImportedEntity(nId As Integer)
      Dim SelEntity As PartManager_GeomEntity = Nothing
      ' cerco tra entita' importate
      SelEntity = m_ImportedEntityList.FirstOrDefault(Function(x) x.nId = nId)
      If IsNothing(SelEntity) Then
         ' cerco tra pezzi creati
         For Each ManagePart In m_ManagerPartList
            For Each Layer In ManagePart.LayerList
               SelEntity = Layer.EntityList.FirstOrDefault(Function(x) x.nId = nId)
               If Not IsNothing(SelEntity) Then
                  SelEntity.bIsSelected = True
                  SelEntity.NotifyPropertyChanged(NameOf(SelEntity.bIsSelected))
                  Exit For
               End If
            Next
            If Not IsNothing(SelEntity) Then
               Exit For
            End If
         Next
      End If
      m_SelImportedEntity = SelEntity
      EgtDeselectAll()
      If Not IsNothing(m_SelImportedEntity) Then
         EgtSelectObj(m_SelImportedEntity.nId)
      End If
      EgtDraw()
      NotifyPropertyChanged(NameOf(SelImportedEntity))
   End Sub

   Private m_ManagerPartList As New ObservableCollection(Of ManagePart_Part)
   Public ReadOnly Property ManagerPartList As ObservableCollection(Of ManagePart_Part)
      Get
         Return m_ManagerPartList
      End Get
   End Property

   Private m_SelManagerPart As ManagePart_Part
   Friend Sub SetSelManagerPart(SelManagePart_Part As ManagePart_Part)
      m_SelManagerPart = SelManagePart_Part
      m_SelManagerLayer = Nothing
   End Sub
   Public ReadOnly Property SelManagerPart As ManagePart_Part
      Get
         Return m_SelManagerPart
      End Get
   End Property

   Private m_SelManagerLayer As ManagePart_Layer
   Public ReadOnly Property SelManagerLayer As ManagePart_Layer
      Get
         Return m_SelManagerLayer
      End Get
   End Property
   Friend Sub SetSelManagerLayer(SelManagePart_Layer As ManagePart_Layer)
      m_SelManagerPart = m_ManagerPartList.FirstOrDefault(Function(x) x.LayerList.Contains(SelManagePart_Layer))
      m_SelManagerLayer = SelManagePart_Layer
   End Sub

   Private m_SelPartManager_GeomEntity As PartManager_GeomEntity
   Public ReadOnly Property SelPartManager_GeomEntity As PartManager_GeomEntity
      Get
         Return m_SelPartManager_GeomEntity
      End Get
   End Property
   Friend Sub SetSelPartManager_GeomEntity(SelPartManager_GeomEntity As PartManager_GeomEntity)
      For Each CurrPart In m_ManagerPartList
         Dim CurrLayer As ManagePart_Layer = CurrPart.LayerList.FirstOrDefault(Function(x) x.EntityList.Contains(SelPartManager_GeomEntity))
         If Not IsNothing(CurrLayer) Then
            m_SelManagerPart = CurrPart
            m_SelManagerLayer = CurrLayer
            Exit For
         End If
      Next
      m_SelPartManager_GeomEntity = SelPartManager_GeomEntity
   End Sub

   Public ReadOnly Property IsImport_Visibility As Visibility
      Get
         Select Case m_Type
            Case ManagePartType.IMPORT
               Return Visibility.Visible
            Case Else ' ManagePartType.MODIFY
               Return Visibility.Collapsed
         End Select
      End Get
   End Property

   Private m_IsEnabled As Boolean = True
   Public ReadOnly Property IsEnabled As Boolean
      Get
         Return m_IsEnabled
      End Get
   End Property
   Friend Sub SetIsEnabled(value As Boolean)
      m_IsEnabled = value
      NotifyPropertyChanged(NameOf(IsEnabled))
   End Sub

   ' Definizione comandi
   Private m_cmdSetReference As ICommand
   Private m_cmdAddPart As ICommand
   Private m_cmdRemovePart As ICommand
   Private m_cmdOk As ICommand
   Private m_cmdCancel As ICommand

   Sub New()
      ' Creo riferimento a questa classe in EgtCAM5Map
      Map.SetRefManagePartPanelVM(Me)
   End Sub

#Region "METHODS"

   Friend Sub Init(Type As ManagePartType)
      m_Type = Type
      Select Case Type
         Case ManagePartType.IMPORT
            ' import
            m_ImportedEntityList.Clear()
            m_ManagerPartList.Clear()
            ' aggiungo geometrie importate a lista
            m_nImportedPartId = EgtGetLastPart()
            Dim nLayerId As Integer = EgtGetFirstLayer(m_nImportedPartId)
            Dim nGeometryId As Integer = EgtGetFirstInGroup(nLayerId)
            While nGeometryId <> GDB_ID.NULL
               Dim sGeometryName As String = ""
               EgtGetName(nGeometryId, sGeometryName)
               m_ImportedEntityList.Add(New PartManager_GeomEntity(Nothing, nGeometryId))
               nGeometryId = EgtGetNext(nGeometryId)
            End While
            ' aggiungo primo pezzo
            m_ManagerPartList.Add(New ManagePart_Part(Nothing))
            m_ManagerPartList(0).LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID).bIsSelected = True
            ' aggiorno i contextmenu di tutti gli entity
            UpdateAllEntityContextMenu()
         Case ManagePartType.MODIFY
            ' modify
            m_ImportedEntityList.Clear()
            m_ManagerPartList.Clear()
            ' carico pezzi in lista
            For Each PrintPart In Map.refTopPanelVM.PartList
               m_ManagerPartList.Add(New ManagePart_Part(PrintPart))
            Next
      End Select
      NotifyPropertyChanged(NameOf(IsImport_Visibility))
      EgtDeselectAll()
   End Sub

   Friend Sub UpdateAllEntityContextMenu()
      ' aggiorno i contextmenu di tutti gli entity
      For Each ManagePart In m_ManagerPartList
         For Each Layer In ManagePart.LayerList
            For Each Entity In Layer.EntityList
               Entity.UpdateContextMenu()
            Next
         Next
      Next
      For Each Entity In ImportedEntityList
         Entity.UpdateContextMenu()
      Next
   End Sub

#End Region    ' METHODS

#Region "COMMANDS"

#Region "AddPart"

   Public ReadOnly Property AddPart_Command As ICommand
      Get
         If m_cmdAddPart Is Nothing Then
            m_cmdAddPart = New Command(AddressOf AddPart)
         End If
         Return m_cmdAddPart
      End Get
   End Property

   Public Sub AddPart()
      m_ManagerPartList.Add(New ManagePart_Part(Nothing))
      ' aggiorno i contextmenu di tutti gli entity
      UpdateAllEntityContextMenu()
   End Sub

#End Region    ' AddPart

#Region "RemovePart"

   Public ReadOnly Property RemovePart_Command As ICommand
      Get
         If m_cmdRemovePart Is Nothing Then
            m_cmdRemovePart = New Command(AddressOf RemovePart)
         End If
         Return m_cmdRemovePart
      End Get
   End Property

   Public Sub RemovePart()
      If IsNothing(SelManagerLayer) AndAlso m_ManagerPartList.Count > 1 Then
         ' rimuovo pezzo
         m_ManagerPartList.Remove(SelManagerPart)
         'Else
         '   ' rimuovo geometria
         '   Dim CurrEntity As PartManager_GeomEntity = m_SelPartManager_GeomEntity
         '   SelManagerLayer.EntityList.Remove(m_SelPartManager_GeomEntity)
         '   ' la rimetto in lista importati
         '   ImportedEntityList.Add(CurrEntity)
      End If
   End Sub

#End Region    ' RemovePart

#Region "Ok"

   Public ReadOnly Property Ok_Command As ICommand
      Get
         If m_cmdOk Is Nothing Then
            m_cmdOk = New Command(AddressOf Ok)
         End If
         Return m_cmdOk
      End Get
   End Property

   Public Sub Ok()
      Select Case m_Type
         Case ManagePartType.IMPORT
            Dim sErr As New List(Of String)
            ' verifico che tutti i pezzi abbiano una superficie da stampare nel layer apposito
            For Each CurrPart In m_ManagerPartList
               For Each CurrLayer In CurrPart.LayerList
                  Select Case CurrLayer.Type
                     Case ManagePart_Layer.LayerType.PRINT_SOLID
                        If CurrLayer.EntityList.Count = 0 Then
                           If sErr.Count > 0 Then sErr(sErr.Count - 1) &= Environment.NewLine
                           sErr.Add(CurrPart.sName & " - No print surface defined!")
                        End If
                  End Select
               Next
            Next
            If sErr.Count > 0 Then
               MessageBox.Show(String.Concat(sErr), "Error")
               Return
            Else
               ' Creo pezzi e layer necessari
               For ManagePart_PartIndex = 0 To m_ManagerPartList.Count - 1
                  Dim ManagePart_Part As ManagePart_Part = m_ManagerPartList(ManagePart_PartIndex)
                  Dim frImportedPart As New Frame3d
                  EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
                  Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT, frImportedPart)
                  EgtSetName(nPartId, PART)
                  Dim nFrameId As Integer = GDB_ID.NULL
                  Dim b3PrintSolid As New BBox3d
                  Dim nPrintPartLayerId As Integer = GDB_ID.NULL
                  Dim PrintSolidEntity As PartManager_GeomEntity = Nothing
                  Dim nRibsLayerId As Integer = GDB_ID.NULL
                  Dim nShellNumberLayerId As Integer = GDB_ID.NULL
                  Dim nAuxSolidsLayerId As Integer = GDB_ID.NULL
                  Dim nMachStartLayerId As Integer = GDB_ID.NULL
                  Dim nOthersLayerId As Integer = GDB_ID.NULL
                  For Each ManagePart_Layer In ManagePart_Part.LayerList
                     Select Case ManagePart_Layer.Type
                        Case ManagePart_Layer.LayerType.PRINT_SOLID
                           nPrintPartLayerId = EgtCreateGroup(nPartId)
                           EgtSetName(nPrintPartLayerId, PRINT_SOLID)
                           EgtSetColor(nPrintPartLayerId, GeomEntityColors.c3Print)
                           If ManagePart_Layer.EntityList.Count > 0 Then
                              PrintSolidEntity = ManagePart_Layer.EntityList(0)
                              EgtRelocateGlob(PrintSolidEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
                              ' calcolo box superficie per creazione riferimento
                              EgtGetBBoxGlob(PrintSolidEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
                              ' elimino colore entita'
                              EgtResetColor(PrintSolidEntity.nId)
                              If PrintSolidEntity.sName <> PrintSolidEntity.nId.ToString() Then
                                 EgtSetInfo(PrintSolidEntity.nId, ENTITY_NAME, PrintSolidEntity.sName)
                              End If
                           End If
                        Case ManagePart_Layer.LayerType.MACH_START
                           nMachStartLayerId = EgtCreateGroup(nPartId)
                           EgtSetName(nMachStartLayerId, LAY_MACH_START)
                           EgtSetColor(nMachStartLayerId, GeomEntityColors.c3MachStart)
                           Dim nMachStartId As Integer = GDB_ID.NULL
                           If ManagePart_Layer.EntityList.Count > 0 Then
                              For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                                 ' se punto o curva compo
                                 Dim EntityType As GDB_TY = EgtGetType(PartManager_GeomEntity.nId)
                                 Select Case EntityType
                                    Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO
                                       ' gli cambio layer
                                       EgtRelocateGlob(PartManager_GeomEntity.nId, nMachStartLayerId, GDB_POS.LAST_SON)
                                       nMachStartId = PartManager_GeomEntity.nId
                                    Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
                                       ' altrimenti la trasformo in curva compo
                                       nMachStartId = EgtCreateCurveCompo(nMachStartLayerId, PartManager_GeomEntity.nId, True)
                                 End Select
                                 EgtSetName(nMachStartId, START_GEOM)
                                 ' elimino colore entita'
                                 EgtResetColor(nMachStartId)
                                 If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                    EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                                 End If
                              Next
                           Else
                              ' creo punto di partenza
                              Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
                              nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
                              EgtSetName(nMachStartId, START_GEOM)
                              ' elimino colore entita'
                              EgtResetColor(nMachStartId)
                           End If
                        Case ManagePart_Layer.LayerType.RIBS
                           nRibsLayerId = EgtCreateGroup(nPartId)
                           EgtSetName(nRibsLayerId, LAY_RIBS)
                           EgtSetColor(nRibsLayerId, GeomEntityColors.c3Rib)
                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
                              EgtSetInfo(PartManager_GeomEntity.nId, RIB_ID, RibPanelVM.GetNextRibIndex())
                              EgtRelocateGlob(PartManager_GeomEntity.nId, nRibsLayerId, GDB_POS.LAST_SON)
                              ' elimino colore entita'
                              EgtResetColor(PartManager_GeomEntity.nId)
                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                              End If
                           Next
                        Case ManagePart_Layer.LayerType.SHELL_NUMBER
                           nShellNumberLayerId = EgtCreateGroup(nPartId)
                           EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
                           EgtSetColor(nShellNumberLayerId, GeomEntityColors.c3ShellNumber)
                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
                              EgtRelocateGlob(PartManager_GeomEntity.nId, nShellNumberLayerId, GDB_POS.LAST_SON)
                              ' elimino colore entita'
                              EgtResetColor(PartManager_GeomEntity.nId)
                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                              End If
                           Next
                        Case ManagePart_Layer.LayerType.AUX_SOLIDS
                           nAuxSolidsLayerId = EgtCreateGroup(nPartId)
                           EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
                           EgtSetColor(nAuxSolidsLayerId, GeomEntityColors.c3AuxSolids)
                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
                              EgtRelocateGlob(PartManager_GeomEntity.nId, nAuxSolidsLayerId, GDB_POS.LAST_SON)
                              ' elimino colore entita'
                              EgtResetColor(PartManager_GeomEntity.nId)
                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                              End If
                           Next
                        Case ManagePart_Layer.LayerType.OTHERS
                           nOthersLayerId = EgtCreateGroup(nPartId)
                           EgtSetName(nOthersLayerId, LAY_OTHERS)
                           EgtSetColor(nOthersLayerId, GeomEntityColors.c3Others)
                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                              EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
                              ' elimino colore entita'
                              EgtResetColor(PartManager_GeomEntity.nId)
                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                              End If
                           Next
                           If ManagePart_PartIndex = 0 Then
                              For Each PartManager_GeomEntity In ImportedEntityList
                                 ' se curva
                                 Dim EntityType As GDB_TY = EgtGetType(PartManager_GeomEntity.nId)
                                 Select Case EntityType
                                    Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
                                       '  la trasformo in curva compo
                                       Dim nOtherId As Integer = EgtCreateCurveCompo(nOthersLayerId, PartManager_GeomEntity.nId, True)
                                       ' elimino colore entita'
                                       EgtResetColor(PartManager_GeomEntity.nId)
                                       If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                          EgtSetInfo(nOtherId, ENTITY_NAME, PartManager_GeomEntity.sName)
                                       End If
                                    Case Else
                                       ' altrimenti la sposto solamente
                                       EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
                                       ' elimino colore entita'
                                       EgtResetColor(PartManager_GeomEntity.nId)
                                       If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                          EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                                       End If
                                 End Select
                              Next
                           End If
                     End Select
                  Next
                  ' aggiungo riferimento
                  Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
                  EgtSetName(nReferenceLayerId, LAY_REFERENCE)
                  ' Creo riferimento 
                  Dim ptOrig As New Point3d(b3PrintSolid.Min())
                  Dim frPrintSolid As New Frame3d(ptOrig)
                  nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
                  If nFrameId Then
                     EgtSetName(nFrameId, FRAME_PART)
                     EgtSetMode(nFrameId, GDB_MD.LOCKED)
                  End If
                  EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, ReferenceBtn.References.BL)
                  ' appoggio il pezzo sulla tavola
                  EgtMove(nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
                  ' lo aggiungo a lista pezzi 
                  Dim sFilePath As String = ""
                  EgtGetInfo(m_nImportedPartId, FILE_PATH, sFilePath)
                  EgtSetInfo(nPartId, FILE_PATH, sFilePath)
                  EgtSetInfo(nPartId, PART_NAME, ManagePart_Part.sName)
                  EgtSetInfo(nPartId, "PartOnTable", 1)
                  Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
                  Map.refTopPanelVM.PartList.Add(NewPart)
               Next
            End If
            'EgtAddMachGroup("3dPrint")
            'EgtSetTable("Tab")

            'Dim nRawId As Integer = EgtAddRawPart(b3PrintSolid.Min, b3PrintSolid.DimX, b3PrintSolid.DimY, b3PrintSolid.DimZ, New Color3d(128, 128, 128, 30))
            'EgtAddPartToRawPart(nPartId, b3PrintSolid.Min, nRawId)
            'EgtMoveToCornerRawPart(nRawId, New Point3d(dPosX, dPosY, 0), MCH_CR.BL)

            'EgtResetCurrMachGroup()

            ' seleziono ultimo pezzo aggiunto
            Map.refTopPanelVM.SelLastPart()
            ' elimino vecchio pezzo d'importazione
            EgtErase(m_nImportedPartId)

         Case ManagePartType.MODIFY
            ' nulla da fare
      End Select
      EgtDeselectAll()
      EgtDraw()
      ' ripristino modalita' standard
      Map.refTopPanelVM.SelPage = Pages.MODIFY
   End Sub

#End Region    ' Ok

#Region "Cancel"

   Public ReadOnly Property Cancel_Command As ICommand
      Get
         If m_cmdCancel Is Nothing Then
            m_cmdCancel = New Command(AddressOf Cancel)
         End If
         Return m_cmdCancel
      End Get
   End Property

   Public Sub Cancel()
      ' elimino pezzo importato
      EgtErase(m_nImportedPartId)
      EgtDeselectAll()
      EgtDraw()
      ' se ci sono pezzi
      If Map.refTopPanelVM.PartList.Count > 0 Then
         ' ripristino modalita' standard
         Map.refTopPanelVM.SelPage = Pages.MODIFY
      Else
         Map.refTopPanelVM.SelPage = Pages.NULL
      End If
   End Sub

#End Region    ' Cancel

#End Region    ' COMMANDS

End Class