- introduzione parametri per infill

- modifica dei parametri auxSolid con gestione infill
- correzione creazione shellnumber e filled solid con esc su creazione percorso

Icarus/Constants/Const3dPrint.vb

@@ -133,9 +133,28 @@
    Public Const MAC_AUXSOLIDSLINKTYPE = "AuxSolidsLinkType"
    Public Const MAC_AUXSOLIDSLINKPARAM = "AuxSolidsLinkParam"
    Public Const MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE = "AuxSolidsStartPointOffsetOnSlice"
+   Public Const MAC_AUXSOLIDSOFFSETLEADPOINT = "AuxSolidsOffsetLeadPoint"
+   Public Const MAC_AUXSOLIDSDENSITY = "AuxSolidsDensity"
+   Public Const MAC_AUXSOLIDSGRIDOVERLAP = "AuxSolidsGridOverlap"
+   Public Const MAC_AUXSOLIDSDIRECTION = "AuxSolidsDirection"
+   Public Const MAC_AUXSOLIDSOFFSETX = "AuxSolidsOffsetX"
+   Public Const MAC_AUXSOLIDSOFFSETY = "AuxSolidsOffsetY"
    Public Const MAC_AUXSOLIDSCOASTINGLEN = "AuxSolidsCoastingLen"
    Public Const MAC_AUXSOLIDSWIPELEN = "AuxSolidsWipeLen"
    Public Const MAC_AUXSOLIDSWIPEDIR = "AuxSolidsWipeDir"
+   Public Const MAC_FLOORTYPE = "FloorType"
+   Public Const MAC_CEILCOUNT = "CeilCount"
+   Public Const MAC_CEILTYPE = "CeilType"
+   Public Const MAC_INFILLTYPE = "InfillType"
+   Public Const MAC_INFILLDENSITY = "InfillDensity"
+   Public Const MAC_INFILLOVERLAP = "InfillOverlap"
+   Public Const MAC_INFILLGRIDOVERLAP = "InfillGridOverlap"
+   Public Const MAC_INFILLDIRECTION = "InfillDirection"
+   Public Const MAC_INFILLOFFSETX = "InfillOffsetX"
+   Public Const MAC_INFILLOFFSETY = "InfillOffsetY"
+   Public Const MAC_INFILLCOASTING = "InfillCoasting"
+   Public Const MAC_INFILLWIPE = "InfillWipe"
+   Public Const MAC_INFILLWIPEDIR = "InfillWipeDir"
    Public Const MAC_DYNAMICMODE = "DynamicMode"
    Public Const MAC_PRINTORDER = "PrintOrder"
    Public Const MAC_CONSTANT = "Constant"

Icarus/Constants/ConstGen.vb

@@ -21,6 +21,7 @@ Public Module ConstGen
    ' File con dati di licenza
    Public Const LIC_FILE_NAME As String = "Icarus.lic"
    Public Const S_LICENCE As String = "Licence"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_KEY As String = "Key"
    Public Const K_NESTKEY As String = "NestKey"
 

Icarus/Constants/ConstIni.vb

@@ -26,6 +26,7 @@ Public Module ConstIni
    'Public Const K_MESSAGES As String = "Messages"
    'Public Const K_WINPLACE As String = "WinPlace"
    'Public Const K_LASTPROJ As String = "LastProj"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_LASTNGEDIR As String = "LastNgeDir"
    Public Const K_LASTIMPDIR As String = "LastImpDir"
    'Public Const K_SUPPORT As String = "Support"

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -111,6 +111,7 @@ Public Class CurrMachining
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, False))
+      m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.INFILL, nPartId, m_nIndex, False))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
             AddHandler MachiningParam.PropertyChanged, AddressOf OnMachiningParamPropertyChanged
@@ -128,6 +129,7 @@ Public Class CurrMachining
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, True))
+      m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.INFILL, nPartId, m_nIndex, True))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
             AddHandler MachiningParam.PropertyChanged, AddressOf OnMachiningParamPropertyChanged
@@ -209,7 +211,6 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.STRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.DIRECTION, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEED, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEEDZ, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LINKZUP, nPartId, nIndex, bForceFromDb, Me),
@@ -261,15 +262,37 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.SHELLNBRWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
+         Case Cathegories.INFILL
+            m_sName = "Infill"
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.FLOORTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.CEILCOUNT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.CEILTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.INFILLTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOFFSETX, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOFFSETY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLCOASTING, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLWIPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
       End Select
       ' verifico dipendenze tra parametri
       Select Case m_Type
@@ -288,6 +311,15 @@ Public Class CurrMachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+         Case Cathegories.INFILL
+            For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+            For Each Param In {MachiningParam.Params.INFILLTYPE}
+               Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
       End Select
    End Sub
 
@@ -328,6 +360,7 @@ Public Class CurrNumericMachiningParam
          End If
          NotifyPropertyChanged(NameOf(sValue))
          NotifyPropertyChanged(NameOf(bIsModifiedFromDb))
+         ManageDependencyParam()
       End Set
    End Property
 
@@ -468,6 +501,24 @@ Public Class CurrNumericMachiningParam
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDENSITY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSDENSITY, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETX
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, m_dValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSCOASTINGLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, m_dValue)
             m_bIsLen = True
@@ -480,13 +531,43 @@ Public Class CurrNumericMachiningParam
          Case Params.FLOWRATE_PC
             bReadFromPart = EgtGetInfo(nPartId, MAC_CONSTANT, m_dValue)
             m_bIsLen = False
+         Case Params.CEILCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CEILCOUNT, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLDENSITY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLDENSITY, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOVERLAP, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLGRIDOVERLAP, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLDIRECTION, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLOFFSETX
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOFFSETX, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLOFFSETY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOFFSETY, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLCOASTING
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLCOASTING, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLWIPE
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLWIPE, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLWIPEDIR
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLWIPEDIR, m_dValue)
+            m_bIsLen = False
       End Select
       m_dOrigValue = m_dValue
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
             Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
-                 Params.FLOORCOUNT, Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK
+                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
                  Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
@@ -499,8 +580,14 @@ Public Class CurrNumericMachiningParam
             Case Params.SHELLNBRDIFFERENCE, Params.SHELLNBRCOASTING, Params.SHELLNBRWIPE, Params.SHELLNBRWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.SHELL_NUMBER).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
+                 Params.AUXSOLIDSOFFSETLEADPOINT, Params.AUXSOLIDSDENSITY, Params.AUXSOLIDSGRIDOVERLAP,
+                 Params.AUXSOLIDSDIRECTION, Params.AUXSOLIDSOFFSETX, Params.AUXSOLIDSOFFSETY,
                  Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.FLOORCOUNT, Params.CEILCOUNT, Params.INFILLDENSITY, Params.INFILLOVERLAP,
+                 Params.INFILLGRIDOVERLAP, Params.INFILLDIRECTION, Params.INFILLOFFSETX,
+                 Params.INFILLOFFSETY, Params.INFILLCOASTING, Params.INFILLWIPE, Params.INFILLWIPEDIR
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_dValue = m_DbParam.dOrigValue
@@ -601,6 +688,18 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, sWriteValue)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             EgtSetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue)
+         Case Params.AUXSOLIDSDENSITY
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSDENSITY, sWriteValue)
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue)
+         Case Params.AUXSOLIDSDIRECTION
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETX
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETY
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, sWriteValue)
          Case Params.AUXSOLIDSCOASTINGLEN
             EgtSetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
          Case Params.AUXSOLIDSWIPELEN
@@ -609,6 +708,26 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
          Case Params.FLOWRATE_PC
             EgtSetInfo(nPartId, MAC_CONSTANT, sWriteValue)
+         Case Params.CEILCOUNT
+            EgtSetInfo(nPartId, MAC_CEILCOUNT, sWriteValue)
+         Case Params.INFILLDENSITY
+            EgtSetInfo(nPartId, MAC_INFILLDENSITY, sWriteValue)
+         Case Params.INFILLOVERLAP
+            EgtSetInfo(nPartId, MAC_INFILLOVERLAP, sWriteValue)
+         Case Params.INFILLGRIDOVERLAP
+            EgtSetInfo(nPartId, MAC_INFILLGRIDOVERLAP, sWriteValue)
+         Case Params.INFILLDIRECTION
+            EgtSetInfo(nPartId, MAC_INFILLDIRECTION, sWriteValue)
+         Case Params.INFILLOFFSETX
+            EgtSetInfo(nPartId, MAC_INFILLOFFSETX, sWriteValue)
+         Case Params.INFILLOFFSETY
+            EgtSetInfo(nPartId, MAC_INFILLOFFSETY, sWriteValue)
+         Case Params.INFILLCOASTING
+            EgtSetInfo(nPartId, MAC_INFILLCOASTING, sWriteValue)
+         Case Params.INFILLWIPE
+            EgtSetInfo(nPartId, MAC_INFILLWIPE, sWriteValue)
+         Case Params.INFILLWIPEDIR
+            EgtSetInfo(nPartId, MAC_INFILLWIPEDIR, sWriteValue)
       End Select
    End Sub
 
@@ -811,9 +930,14 @@ Public Class CurrComboMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
          Case Params.AUXSOLIDSINFILL
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILL, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
@@ -836,6 +960,28 @@ Public Class CurrComboMachiningParam
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_DYNAMICMODE, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.FLOORTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_FLOORTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.CEILTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CEILTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.INFILLTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
       End Select
       m_OrigSelValue = m_SelValue
       If nIndex > 0 Then
@@ -849,6 +995,8 @@ Public Class CurrComboMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSINFILL, Params.AUXSOLIDSSTRANDORDER, Params.AUXSOLIDSLINKTYPE
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.FLOORTYPE, Params.CEILTYPE, Params.INFILLTYPE
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_SelValue = m_DbParam.OrigSelValue
@@ -887,6 +1035,12 @@ Public Class CurrComboMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id)
          Case Params.DYNAMIC_MODE
             EgtSetInfo(nPartId, MAC_DYNAMICMODE, m_SelValue.Id)
+         Case Params.FLOORTYPE
+            EgtSetInfo(nPartId, MAC_FLOORTYPE, m_SelValue.Id)
+         Case Params.CEILTYPE
+            EgtSetInfo(nPartId, MAC_CEILTYPE, m_SelValue.Id)
+         Case Params.INFILLTYPE
+            EgtSetInfo(nPartId, MAC_INFILLTYPE, m_SelValue.Id)
       End Select
    End Sub
 

Icarus/FilledSolidPanel/FilledSolidPanelVM.vb

@@ -735,6 +735,7 @@ Public Class FilledSolidPanelVM
          If NewGeomType = GDB_TY.CRV_COMPO Then
             If Not EgtCurveIsClosed(nNewEntityId) Then
                EgtCloseCurveCompo(nNewEntityId)
+               m_bEscOnLine2P = True
             End If
             EgtSetName(nNewEntityId, RIB_CURVE)
             ' resetto colore entita'
@@ -763,9 +764,6 @@ Public Class FilledSolidPanelVM
             If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.EXTRUDE) Then
                m_bIsCreatingExtrusion = True
                Map.refControllerInputPanelVM.IsChecked = True
-               If Not EgtCurveIsClosed(nNewEntityId) Then
-                  m_bEscOnLine2P = True
-               End If
             Else
                ' cancello layer
                EgtErase(nNewExtrusionLayerId)

Icarus/FilledSolidParamPanel/FilledSolidParamPanelVM.vb

@@ -42,12 +42,18 @@ Public Class FilledSolidParamPanelVM
 
       m_Type = Cathegories.AUX_SOLID
       m_sName = "Filled Solid"
-      m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nFilledSolidId, nPartId, Me),
+      m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
-                                                          New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nFilledSolidId, nPartId, Me)})
@@ -202,6 +208,30 @@ Public Class FilledSolidNumericMachiningParam
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dPartValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDENSITY
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSDENSITY, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDIRECTION
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETX
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETY
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, m_dPartValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSCOASTINGLEN
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSCOASTINGLEN, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, m_dPartValue)
@@ -248,6 +278,42 @@ Public Class FilledSolidNumericMachiningParam
             Else
                EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE)
             End If
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT)
+            End If
+         Case Params.AUXSOLIDSDENSITY
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY)
+            End If
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP)
+            End If
+         Case Params.AUXSOLIDSDIRECTION
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION)
+            End If
+         Case Params.AUXSOLIDSOFFSETX
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX)
+            End If
+         Case Params.AUXSOLIDSOFFSETY
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY)
+            End If
          Case Params.AUXSOLIDSCOASTINGLEN
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
@@ -339,9 +405,14 @@ Public Class FilledSolidComboMachiningParam
       Dim bReadFromPart As Boolean = False
       Select Case Type
          Case Params.AUXSOLIDSINFILL
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
             Dim nSelValue As Integer = 1
             bReadFromRib = EgtGetInfo(nRibId, MAC_AUXSOLIDSINFILL, nSelValue)
             If bReadFromRib Then
@@ -379,7 +450,7 @@ Public Class FilledSolidComboMachiningParam
          Else
             Select Case Type
                Case Params.AUXSOLIDSINFILL
-                  m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_INFILL.NONE)
+                  m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_INFILL_TYPE.NONE)
                   m_SelValue = m_OrigSelValue
                Case Params.AUXSOLIDSSTRANDORDER
                   m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_STRANDORDERS.OUTTOIN)

Icarus/MachiningDb/Machining.vb

@@ -45,12 +45,6 @@ Public Class Machining
       SUPPORT = 4
    End Enum
 
-   Public Enum MPAR_INFILL As Integer
-      NONE = 1
-      OFFSET = 2
-      ZIGZAG = 3
-   End Enum
-
    Public Enum MPAR_DYNAMIC_MODE As Integer
       STANDARD = 1
       FAST = 2
@@ -67,6 +61,17 @@ Public Class Machining
       RIB_SUPPORT = 8
    End Enum
 
+   Public Enum MPAR_INFILL_TYPE As Integer
+      NONE = 0
+      OFFSET = 16
+      ZIGZAG = 17
+      LINES = 32
+      GRID = 33
+      ZIGZAG_GRID = 34
+      HONEYCOMB = 35
+      HONEYCOMB_GRID = 36
+   End Enum
+
    Protected m_CathegoryList As New ObservableCollection(Of MachiningCathegory)
    Public ReadOnly Property CathegoryList As ObservableCollection(Of MachiningCathegory)
       Get
@@ -147,6 +152,7 @@ Public Class Machining
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.RIBS, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nIndex))
+      m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.INFILL, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.MATERIALS, nIndex))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
@@ -273,7 +279,8 @@ Public Class MachiningCathegory
       RIBS = 8
       SHELL_NUMBER = 9
       AUX_SOLID = 10
-      MATERIALS = 11
+      INFILL = 11
+      MATERIALS = 12
    End Enum
 
    Protected m_Type As Cathegories
@@ -326,7 +333,6 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.STRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.DIRECTION, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEED, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEEDZ, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.LINKZUP, nIndex, Me),
@@ -378,15 +384,37 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.SHELLNBRWIPEDIR, nIndex, Me)})
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
-            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nIndex, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
-                                                                New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nIndex, Me)})
+         Case Cathegories.INFILL
+            m_sName = "Infill"
+            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.FLOORTYPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.CEILCOUNT, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.CEILTYPE, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.INFILLTYPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOFFSETX, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOFFSETY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLCOASTING, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLWIPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLWIPEDIR, nIndex, Me)})
          Case Cathegories.MATERIALS
             m_sName = "Materials"
             Dim sMaterials As String = ""
@@ -414,6 +442,15 @@ Public Class MachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+         Case Cathegories.INFILL
+            For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+            For Each Param In {MachiningParam.Params.INFILLTYPE}
+               Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
       End Select
    End Sub
 
@@ -454,7 +491,6 @@ Public MustInherit Class MachiningParam
       STARTPOINTOFFSETONSLICE = 8
       STRANDORDER = 9
       DIRECTION = 10
-      FLOORCOUNT = 11
       G0FEED = 12
       LINKZUP = 13
       G0FEEDZ = 14
@@ -504,10 +540,30 @@ Public MustInherit Class MachiningParam
       AUXSOLIDSLINKTYPE = 204
       AUXSOLIDSLINKPARAM = 205
       AUXSOLIDSSTARTPOINTOFFSETONSLICE = 206
-      AUXSOLIDSCOASTINGLEN = 207
+      AUXSOLIDSOFFSETLEADPOINT = 207
-      AUXSOLIDSWIPELEN = 208
+      AUXSOLIDSDENSITY = 208
-      AUXSOLIDSWIPEDIR = 209
+      AUXSOLIDSGRIDOVERLAP = 209
-      MATERIALS = 250
+      AUXSOLIDSDIRECTION = 210
+      AUXSOLIDSOFFSETX = 211
+      AUXSOLIDSOFFSETY = 212
+      AUXSOLIDSCOASTINGLEN = 213
+      AUXSOLIDSWIPELEN = 214
+      AUXSOLIDSWIPEDIR = 215
+      FLOORCOUNT = 250
+      FLOORTYPE = 251
+      CEILCOUNT = 252
+      CEILTYPE = 253
+      INFILLTYPE = 254
+      INFILLDENSITY = 255
+      INFILLOVERLAP = 256
+      INFILLGRIDOVERLAP = 257
+      INFILLDIRECTION = 258
+      INFILLOFFSETX = 259
+      INFILLOFFSETY = 260
+      INFILLCOASTING = 261
+      INFILLWIPE = 262
+      INFILLWIPEDIR = 263
+      MATERIALS = 500
    End Enum
 
    Protected m_Type As Params
@@ -645,6 +701,18 @@ Public MustInherit Class MachiningParam
             m_sName = "Link Parameter"
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             m_sName = "Start Point Offset On Slice"
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            m_sName = "Offset Lead Point"
+         Case Params.AUXSOLIDSDENSITY
+            m_sName = "Density [%]"
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            m_sName = "Grid Overlap [%]"
+         Case Params.AUXSOLIDSDIRECTION
+            m_sName = "Direction"
+         Case Params.AUXSOLIDSOFFSETX
+            m_sName = "Offset X"
+         Case Params.AUXSOLIDSOFFSETY
+            m_sName = "Offset Y"
          Case Params.AUXSOLIDSCOASTINGLEN
             m_sName = "Coasting Length"
          Case Params.AUXSOLIDSWIPELEN
@@ -663,6 +731,32 @@ Public MustInherit Class MachiningParam
             m_sName = "Dynamic Mode"
          Case Params.PRINT_ORDER
             m_sName = "Print Order"
+         Case Params.FLOORTYPE
+            m_sName = "Floor Type"
+         Case Params.CEILCOUNT
+            m_sName = "Ceil Count"
+         Case Params.CEILTYPE
+            m_sName = "Ceil Type"
+         Case Params.INFILLTYPE
+            m_sName = "Infill Type"
+         Case Params.INFILLDENSITY
+            m_sName = "Density [%]"
+         Case Params.INFILLOVERLAP
+            m_sName = "Overlap [%]"
+         Case Params.INFILLGRIDOVERLAP
+            m_sName = "Grid Overlap [%]"
+         Case Params.INFILLDIRECTION
+            m_sName = "Direction"
+         Case Params.INFILLOFFSETX
+            m_sName = "Offset X"
+         Case Params.INFILLOFFSETY
+            m_sName = "Offset Y"
+         Case Params.INFILLCOASTING
+            m_sName = "Coasting"
+         Case Params.INFILLWIPE
+            m_sName = "Wipe"
+         Case Params.INFILLWIPEDIR
+            m_sName = "Wipe Direction"
       End Select
    End Sub
 
@@ -714,6 +808,7 @@ Public Class NumericMachiningParam
             m_dValue = dTempValue
          End If
          NotifyPropertyChanged(NameOf(sValue))
+         ManageDependencyParam()
       End Set
    End Property
 
@@ -882,6 +977,24 @@ Public Class NumericMachiningParam
             Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, 0)
                m_bIsLen = True
+            Case Params.AUXSOLIDSOFFSETLEADPOINT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETLEADPOINT, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSDENSITY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSDENSITY, 0)
+               m_bIsLen = False
+            Case Params.AUXSOLIDSGRIDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSGRIDOVERLAP, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSDIRECTION
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSDIRECTION, 0)
+               m_bIsLen = False
+            Case Params.AUXSOLIDSOFFSETX
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETX, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSOFFSETY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETY, 0)
+               m_bIsLen = True
             Case Params.AUXSOLIDSCOASTINGLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSCOASTINGLEN, 0)
                m_bIsLen = True
@@ -894,11 +1007,53 @@ Public Class NumericMachiningParam
             Case Params.FLOWRATE_PC
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_CONSTANT, 100)
                m_bIsLen = False
+            Case Params.CEILCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_CEILCOUNT, 0)
+               m_bIsLen = False
+            Case Params.INFILLDENSITY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLDENSITY, 0)
+               m_bIsLen = False
+            Case Params.INFILLOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOVERLAP, 0)
+               m_bIsLen = False
+            Case Params.INFILLGRIDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLGRIDOVERLAP, 0)
+               m_bIsLen = False
+            Case Params.INFILLDIRECTION
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLDIRECTION, 0)
+               m_bIsLen = False
+            Case Params.INFILLOFFSETX
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOFFSETX, 0)
+               m_bIsLen = True
+            Case Params.INFILLOFFSETY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOFFSETY, 0)
+               m_bIsLen = True
+            Case Params.INFILLCOASTING
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLCOASTING, 0)
+               m_bIsLen = True
+            Case Params.INFILLWIPE
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLWIPE, 0)
+               m_bIsLen = True
+            Case Params.INFILLWIPEDIR
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLWIPEDIR, 0)
+               m_bIsLen = False
          End Select
       End If
       m_dOrigValue = m_dValue
    End Sub
 
+   Friend Sub ManageDependencyParam()
+      ' gestisco dis/attivazione parametri dipendenti
+      Select Case m_Type
+         Case Params.FLOORCOUNT
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.FLOORTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.CEILCOUNT
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.CEILTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue <> 0)
+      End Select
+   End Sub
+
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Dim sWriteValue As String = ""
       If m_bIsLen Then
@@ -985,6 +1140,18 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKPARAM, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSDENSITY
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSDENSITY, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSDIRECTION
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSDIRECTION, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETX
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETX, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETY
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETY, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSCOASTINGLEN
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSWIPELEN
@@ -993,6 +1160,26 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue, sFilePath)
          Case Params.FLOWRATE_PC
             WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue, sFilePath)
+         Case Params.CEILCOUNT
+            WriteMachiningParam(nIndex, MAC_CEILCOUNT, sWriteValue, sFilePath)
+         Case Params.INFILLDENSITY
+            WriteMachiningParam(nIndex, MAC_INFILLDENSITY, sWriteValue, sFilePath)
+         Case Params.INFILLOVERLAP
+            WriteMachiningParam(nIndex, MAC_INFILLOVERLAP, sWriteValue, sFilePath)
+         Case Params.INFILLGRIDOVERLAP
+            WriteMachiningParam(nIndex, MAC_INFILLGRIDOVERLAP, sWriteValue, sFilePath)
+         Case Params.INFILLDIRECTION
+            WriteMachiningParam(nIndex, MAC_INFILLDIRECTION, sWriteValue, sFilePath)
+         Case Params.INFILLOFFSETX
+            WriteMachiningParam(nIndex, MAC_INFILLOFFSETX, sWriteValue, sFilePath)
+         Case Params.INFILLOFFSETY
+            WriteMachiningParam(nIndex, MAC_INFILLOFFSETY, sWriteValue, sFilePath)
+         Case Params.INFILLCOASTING
+            WriteMachiningParam(nIndex, MAC_INFILLCOASTING, sWriteValue, sFilePath)
+         Case Params.INFILLWIPE
+            WriteMachiningParam(nIndex, MAC_INFILLWIPE, sWriteValue, sFilePath)
+         Case Params.INFILLWIPEDIR
+            WriteMachiningParam(nIndex, MAC_INFILLWIPEDIR, sWriteValue, sFilePath)
       End Select
    End Sub
 
@@ -1137,50 +1324,71 @@ Public Class ComboMachiningParam
             Case Params.STRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                         New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_STRANDORDER, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_STRANDORDER, Machining.MPAR_STRANDORDERS.OUTTOIN))
             Case Params.DIRECTION
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_DIRECTIONS.CCW, "Counterclockwise"),
                                                         New IdNameStruct(Machining.MPAR_DIRECTIONS.CW, "Clockwise")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DIRECTION, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DIRECTION, Machining.MPAR_DIRECTIONS.CCW))
             Case Params.LINKTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LINKTYPES.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.BIARC, "Biarc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LINKTYPE, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LINKTYPE, Machining.MPAR_LEADINOUT.NONE))
             Case Params.LEADIN
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LEADINOUT.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADIN, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADIN, Machining.MPAR_LEADINOUT.NONE))
             Case Params.LEADOUT
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LEADINOUT.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, Machining.MPAR_LEADINOUT.NONE))
             Case Params.RIBSTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.SUPPORT, "Support")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, 1))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, Machining.MPAR_RIBSTYPE.INTERNAL))
             Case Params.AUXSOLIDSINFILL
-               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
-                                                        New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
-                                                        New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILL, 0))
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILL, Machining.MPAR_INFILL_TYPE.NONE))
             Case Params.AUXSOLIDSSTRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                         New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDORDER, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDORDER, Machining.MPAR_STRANDORDERS.OUTTOIN))
             Case Params.AUXSOLIDSLINKTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LINKTYPES.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.BIARC, "Biarc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSLINKTYPE, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSLINKTYPE, Machining.MPAR_LINKTYPES.NONE))
             Case Params.DYNAMIC_MODE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_DYNAMIC_MODE.STANDARD, "Standard"),
                                                         New IdNameStruct(Machining.MPAR_DYNAMIC_MODE.FAST, "Fast")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DYNAMICMODE, 1))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DYNAMICMODE, Machining.MPAR_DYNAMIC_MODE.STANDARD))
+            Case Params.FLOORTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_FLOORTYPE, Machining.MPAR_INFILL_TYPE.OFFSET))
+            Case Params.CEILTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_CEILTYPE, Machining.MPAR_INFILL_TYPE.OFFSET))
+            Case Params.INFILLTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_INFILLTYPE, Machining.MPAR_INFILL_TYPE.NONE))
          End Select
       End If
       m_OrigSelValue = m_SelValue
@@ -1207,11 +1415,42 @@ Public Class ComboMachiningParam
             CheckMachiningParam.SetIsActive(m_SelValue.Id = MPAR_RIBSTYPE.UNBOUNDED)
          Case Params.AUXSOLIDSINFILL
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+                                            m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+                                            m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
-            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDENSITY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSGRIDOVERLAP)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso
+                                           m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDIRECTION)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETX)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+         Case Params.INFILLTYPE
+            Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDENSITY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLGRIDOVERLAP)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDIRECTION)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETX)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
       End Select
    End Sub
 
@@ -1239,6 +1478,12 @@ Public Class ComboMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id, sFilePath)
          Case Params.DYNAMIC_MODE
             WriteMachiningParam(nIndex, MAC_DYNAMICMODE, m_SelValue.Id, sFilePath)
+         Case Params.FLOORTYPE
+            WriteMachiningParam(nIndex, MAC_FLOORTYPE, m_SelValue.Id, sFilePath)
+         Case Params.CEILTYPE
+            WriteMachiningParam(nIndex, MAC_CEILTYPE, m_SelValue.Id, sFilePath)
+         Case Params.INFILLTYPE
+            WriteMachiningParam(nIndex, MAC_INFILLTYPE, m_SelValue.Id, sFilePath)
       End Select
    End Sub
 

Icarus/MainWindow/MainWindowM.vb

@@ -75,13 +75,6 @@ Public Class MainWindowM
       End Get
    End Property
 
-   Private m_bAutoNestOption As Boolean = False
-   Friend ReadOnly Property AutoNestOption As Boolean
-      Get
-         Return m_bAutoNestOption
-      End Get
-   End Property
-
    Friend ReadOnly Property sVersion As String
       Get
          Return My.Application.Info.Version.Major.ToString() & "." &
@@ -189,14 +182,17 @@ Public Class MainWindowM
       Dim sKey As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_KEY, "", sKey, sLicFile)
       EgtSetKey(sKey)
-      Dim sNestKey As String = ""
+      ' Impostazioni per chiave di rete
-      EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
+      Dim bNetKey As Boolean = ( GetMainPrivateProfileInt( S_GENERAL, K_NETKEY, 0) = 1)
-      'EgtSetNestKey(sNestKey)
+      EgtSetNetHwKey( bNetKey)
-      ' Verifico abilitazione nesting automatico
+      Dim sLockId As String = ""
-      m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
+      EgtUILib.GetPrivateProfileString( S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty( sLockId) Then
+         EgtSetLockId( sLockId)
+      End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2505, 1, m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2506, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5583, 2505, 1, m_nKeyOptions)
+                            EgtGetKeyOptions(5583, 2506, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

Icarus/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.5.1")>
+<Assembly: AssemblyVersion("2.5.6.1")>
-<Assembly: AssemblyFileVersion("2.5.5.1")>
+<Assembly: AssemblyFileVersion("2.5.6.1")>

Icarus/ShellNumberPanel/ShellNumberPanelVM.vb

@@ -740,6 +740,7 @@ Public Class ShellNumberPanelVM
          If NewGeomType = GDB_TY.CRV_COMPO Then
             If Not EgtCurveIsClosed(nNewEntityId) Then
                EgtCloseCurveCompo(nNewEntityId)
+               m_bEscOnLine2P = True
             End If
             EgtSetName(nNewEntityId, RIB_CURVE)
             ' resetto colore entita'
@@ -768,9 +769,6 @@ Public Class ShellNumberPanelVM
             If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.EXTRUDE) Then
                m_bIsCreatingExtrusion = True
                Map.refControllerInputPanelVM.IsChecked = True
-               If Not EgtCurveIsClosed(nNewEntityId) Then
-                  m_bEscOnLine2P = True
-               End If
             Else
                ' cancello layer
                EgtErase(nNewExtrusionLayerId)