- modifiche per export del 3dm per la macchina

- evito creazione icrx se generazione andata male

Icarus/Constants/Const3dPrint.vb

@@ -3,6 +3,7 @@
    Public Const TABLE = "Table"
    Public Const TABLE_OUTLINE = "TableOutline"
    Public Const EXTRUSION_AREA = "ExtrusionArea"
+   Public Const EXTRUSION_RECT = "ExtrusionRect"
    Public Const PART = "Part"
    Public Const PRINT_SOLID = "PrintSolid"
    Public Const LAY_MACH_START = "MachStart"
@@ -108,6 +109,7 @@
    Public Const MAC_PREFLOWDELAY = "PreFlowDelay"
    Public Const MAC_POSTFLOWDELAY = "PostFlowDelay"
    Public Const MAC_SCREWBACK = "ScrewBack"
+   Public Const MAC_SLICINGHEIGHT = "SlicingHeight"
    Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"
    Public Const MAC_RIBSSTRANDCOUNT = "RibsStrandCount"
@@ -129,6 +131,8 @@
    Public Const MAC_SHELLNBRWIPEDIR = "ShellNbrWipeDir"
    Public Const MAC_AUXSOLIDSOVERLAP = "AuxSolidsOverlap"
    Public Const MAC_AUXSOLIDSINFILL = "AuxSolidsInfill"
+   Public Const MAC_AUXSOLIDSINFILLLINK = "AuxSolidsInfillLink"
+   Public Const MAC_AUXSOLIDSSTRANDCOUNT = "AuxSolidsStrandCount"
    Public Const MAC_AUXSOLIDSSTRANDORDER = "AuxSolidsStrandOrder"
    Public Const MAC_AUXSOLIDSLINKTYPE = "AuxSolidsLinkType"
    Public Const MAC_AUXSOLIDSLINKPARAM = "AuxSolidsLinkParam"
@@ -146,6 +150,7 @@
    Public Const MAC_CEILCOUNT = "CeilCount"
    Public Const MAC_CEILTYPE = "CeilType"
    Public Const MAC_INFILLTYPE = "InfillType"
+   Public Const MAC_INFILLLINK = "InfillLink"
    Public Const MAC_INFILLDENSITY = "InfillDensity"
    Public Const MAC_INFILLOVERLAP = "InfillOverlap"
    Public Const MAC_INFILLGRIDOVERLAP = "InfillGridOverlap"

Icarus/Constants/ConstGen.vb

@@ -53,6 +53,7 @@ Public Module ConstGen
    ' Abilitazioni licenza
    Friend Enum KEY_OPT As UInteger
       BASE = 1                            ' Prodotto Icarus
+      MACHINE_EXPORT = 2                  ' opzione per esportare file icrx per macchina
    End Enum
 
    ' File di log generale

Icarus/Constants/ConstMachIni.vb

@@ -10,6 +10,7 @@
    Public Const K_SLICINGTYPE As String = "SlicingType"
    Public Const K_SPEED_MIN As String = "SpeedMin"
    Public Const K_SPEED_MAX As String = "SpeedMax"
+   Public Const K_MAX_HEIGHT As String = "HMax"
 
    Public Const S_MINMAX As String = "MinMax"
 

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -220,7 +220,8 @@ Public Class CurrMachiningCathegory
                                                                 New CurrOrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb, Me),
@@ -263,6 +264,8 @@ Public Class CurrMachiningCathegory
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nPartId, nIndex, bForceFromDb, Me),
@@ -284,6 +287,7 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.CEILCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.CEILTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.INFILLTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.INFILLLINK, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nPartId, nIndex, bForceFromDb, Me),
@@ -311,6 +315,10 @@ Public Class CurrMachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
          Case Cathegories.INFILL
             For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
                Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
@@ -459,6 +467,9 @@ Public Class CurrNumericMachiningParam
          Case Params.SCREWBACK
             bReadFromPart = EgtGetInfo(nPartId, MAC_SCREWBACK, m_dValue)
             m_bIsLen = True
+         Case Params.SLICINGHEIGHT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGHEIGHT, m_dValue)
+            m_bIsLen = True
          Case Params.RIBSOVERLAP
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_dValue)
             m_bIsLen = False
@@ -498,6 +509,9 @@ Public Class CurrNumericMachiningParam
          Case Params.AUXSOLIDSLINKPARAM
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            m_bIsLen = False
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             m_bIsLen = True
@@ -567,7 +581,7 @@ Public Class CurrNumericMachiningParam
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
             Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
-                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK
+                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK, Params.SLICINGHEIGHT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
                  Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
@@ -582,7 +596,7 @@ Public Class CurrNumericMachiningParam
             Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
                  Params.AUXSOLIDSOFFSETLEADPOINT, Params.AUXSOLIDSDENSITY, Params.AUXSOLIDSGRIDOVERLAP,
                  Params.AUXSOLIDSDIRECTION, Params.AUXSOLIDSOFFSETX, Params.AUXSOLIDSOFFSETY,
-                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
+                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR, Params.AUXSOLIDSSTRANDCOUNT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.FLOORCOUNT, Params.CEILCOUNT, Params.INFILLDENSITY, Params.INFILLOVERLAP,
                  Params.INFILLGRIDOVERLAP, Params.INFILLDIRECTION, Params.INFILLOFFSETX,
@@ -660,6 +674,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_POSTFLOWDELAY, sWriteValue)
          Case Params.SCREWBACK
             EgtSetInfo(nPartId, MAC_SCREWBACK, sWriteValue)
+         Case Params.SLICINGHEIGHT
+            EgtSetInfo(nPartId, MAC_SLICINGHEIGHT, sWriteValue)
          Case Params.RIBSOVERLAP
             EgtSetInfo(nPartId, MAC_RIBSOVERLAP, sWriteValue)
          Case Params.RIBSSTRANDCOUNT
@@ -682,6 +698,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPE, sWriteValue)
          Case Params.SHELLNBRWIPEDIR
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPEDIR, sWriteValue)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
          Case Params.AUXSOLIDSOVERLAP
             EgtSetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
          Case Params.AUXSOLIDSLINKPARAM
@@ -1130,6 +1148,10 @@ Public Class CurrCheckMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bValue)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, m_bValue)
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+         Case Params.INFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLLINK, m_bValue)
       End Select
       m_bOrigValue = m_bValue
       If nIndex > 0 Then
@@ -1139,6 +1161,10 @@ Public Class CurrCheckMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSINVERTSTRANDORDER, Params.RIBSLEADININVERT, Params.RIBSLEADOUTINVERT, Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.INFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_bValue = m_DbParam.bOrigValue
@@ -1165,6 +1191,10 @@ Public Class CurrCheckMachiningParam
             EgtSetInfo(nPartId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             EgtSetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0))
+         Case Params.AUXSOLIDSINFILLLINK
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+         Case Params.INFILLLINK
+            EgtSetInfo(nPartId, MAC_INFILLLINK, If(m_bValue, 1, 0))
       End Select
    End Sub
 

Icarus/CurrMachiningPanel/CurrMachiningPanelV.xaml

@@ -54,9 +54,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
+                                    <StackPanel Orientation="Horizontal">
-                                               Margin="0,0,2.5,0"
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,2.5,0"
@@ -79,9 +86,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
+                                    <StackPanel Orientation="Horizontal">
-                                               Margin="0,0,2.5,0"
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -107,9 +121,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
+                                    <StackPanel Orientation="Horizontal">
-                                               Margin="0,0,2.5,0"
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/FilledSolidParamPanel/FilledSolidParamPanelV.xaml

@@ -84,6 +84,32 @@
                                 Style="{StaticResource ToolBar_SmallButton}"/>
                      </Grid>
                   </DataTemplate>
+                  <DataTemplate DataType="{x:Type PrintApp:CheckMachiningParam}">
+                     <Grid Margin="0,1,2.5,1"
+                           IsEnabled="{Binding bIsActive}">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="Auto"/>
+                        </Grid.ColumnDefinitions>
+                        <TextBlock Text="{Binding sName}"
+                                   Margin="0,0,2.5,0"
+                                   Style="{StaticResource ParameterList_TextBlock}"/>
+                        <CheckBox Grid.Column="1"
+                                  IsChecked="{Binding bValue}"
+                                  HorizontalAlignment="Center"
+                                  VerticalAlignment="Center"
+                                  Margin="2.5,0,0,0"/>
+                        <Button Grid.Column="2"
+                                Content="R"
+                                Command="{Binding ResetParam_Command}"
+                                IsEnabled="{Binding bIsModifiedFromPart}"
+                                VerticalContentAlignment="Center"
+                                HorizontalContentAlignment="Center"
+                                Margin="2.5,0,0,0"
+                                Style="{StaticResource ToolBar_SmallButton}"/>
+                     </Grid>
+                  </DataTemplate>
                </ItemsControl.Resources>
             </ItemsControl>
          </ScrollViewer>

Icarus/FilledSolidParamPanel/FilledSolidParamPanelVM.vb

@@ -43,6 +43,8 @@ Public Class FilledSolidParamPanelVM
       m_Type = Cathegories.AUX_SOLID
       m_sName = "Filled Solid"
       m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidcheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nFilledSolidId, nPartId, Me),
@@ -196,6 +198,10 @@ Public Class FilledSolidNumericMachiningParam
       MyBase.New(Type, Cathegory)
       Dim bReadFromPart As Boolean = False
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dPartValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSOVERLAP
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, m_dPartValue)
@@ -260,6 +266,12 @@ Public Class FilledSolidNumericMachiningParam
          sWriteValue = DoubleToString(m_dValue, 2)
       End If
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT)
+            End If
          Case Params.AUXSOLIDSOVERLAP
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
@@ -518,4 +530,95 @@ Public Class FilledSolidComboMachiningParam
 #End Region    ' COMMANDS
 
 
+End Class
+
+Public Class FilledSolidCheckMachiningParam
+   Inherits CheckMachiningParam
+
+   Public Overrides Property bValue As Boolean
+      Get
+         Return m_bValue
+      End Get
+      Set(value As Boolean)
+         m_bValue = value
+         NotifyPropertyChanged(NameOf(bValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_bPartValue As Boolean
+   Public ReadOnly Property bPartValue As Boolean
+      Get
+         Return m_bPartValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_bValue <> m_bPartValue
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nAuxSolidId As Integer, nPartId As Integer, Cathegory As MachiningCathegory)
+      MyBase.New(Type, Cathegory)
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bPartValue)
+      End Select
+      m_bOrigValue = m_bValue
+      If Not bReadFromPart Then
+         m_bValue = m_bPartValue
+         m_bOrigValue = m_bPartValue
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nAuxSolidId As Integer)
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_bOrigValue = m_bValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_bValue = m_bPartValue
+      NotifyPropertyChanged(NameOf(bValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
 End Class

Icarus/Icarus.vbproj

@@ -87,6 +87,9 @@
     <Reference Include="Ionic.Zip, Version=1.9.1.8, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c, processorArchitecture=MSIL">
       <HintPath>..\packages\Ionic.Zip.1.9.1.8\lib\Ionic.Zip.dll</HintPath>
     </Reference>
+    <Reference Include="Newtonsoft.Json, Version=13.0.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, processorArchitecture=MSIL">
+      <HintPath>..\packages\Newtonsoft.Json.13.0.3\lib\net45\Newtonsoft.Json.dll</HintPath>
+    </Reference>
     <Reference Include="PresentationFramework.Aero2" />
     <Reference Include="System.Core" />
     <Reference Include="System.Drawing" />
@@ -320,6 +323,7 @@
     <Compile Include="Utility\DisableModifiedMgr.vb" />
     <Compile Include="Utility\EgwCrypto.vb" />
     <Compile Include="Utility\GeomEntityColors.vb" />
+    <Compile Include="Utility\JsonUtility.vb" />
     <Compile Include="Utility\LuaExec.vb" />
     <Compile Include="Utility\Map.vb" />
     <Compile Include="Utility\MyMachine.vb" />

Icarus/MachiningDb/Machining.vb

@@ -342,7 +342,8 @@ Public Class MachiningCathegory
                                                                 New OrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me)})
+                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nIndex, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nIndex, Me),
@@ -385,6 +386,8 @@ Public Class MachiningCathegory
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
             m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nIndex, Me),
@@ -406,6 +409,7 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.CEILCOUNT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.CEILTYPE, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.INFILLTYPE, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.INFILLLINK, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nIndex, Me),
@@ -442,6 +446,10 @@ Public Class MachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
          Case Cathegories.INFILL
             For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
                Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
@@ -501,6 +509,7 @@ Public MustInherit Class MachiningParam
       PREFLOWDELAY = 19
       POSTFLOWDELAY = 20
       SCREWBACK = 21
+      SLICINGHEIGHT = 22
       LINKTYPE = 51
       LINKPARAM = 52
       LEADIN = 53
@@ -549,20 +558,23 @@ Public MustInherit Class MachiningParam
       AUXSOLIDSCOASTINGLEN = 213
       AUXSOLIDSWIPELEN = 214
       AUXSOLIDSWIPEDIR = 215
+      AUXSOLIDSSTRANDCOUNT = 216
+      AUXSOLIDSINFILLLINK = 217
       FLOORCOUNT = 250
       FLOORTYPE = 251
       CEILCOUNT = 252
       CEILTYPE = 253
       INFILLTYPE = 254
-      INFILLDENSITY = 255
+      INFILLLINK = 255
-      INFILLOVERLAP = 256
+      INFILLDENSITY = 256
-      INFILLGRIDOVERLAP = 257
+      INFILLOVERLAP = 257
-      INFILLDIRECTION = 258
+      INFILLGRIDOVERLAP = 258
-      INFILLOFFSETX = 259
+      INFILLDIRECTION = 259
-      INFILLOFFSETY = 260
+      INFILLOFFSETX = 260
-      INFILLCOASTING = 261
+      INFILLOFFSETY = 261
-      INFILLWIPE = 262
+      INFILLCOASTING = 262
-      INFILLWIPEDIR = 263
+      INFILLWIPE = 263
+      INFILLWIPEDIR = 264
       MATERIALS = 500
    End Enum
 
@@ -589,12 +601,29 @@ Public MustInherit Class MachiningParam
       End Get
    End Property
 
+   Public ReadOnly Property bIsBeta As Boolean
+      Get
+         Select Case m_Type
+            Case Params.FLOORCOUNT, Params.FLOORTYPE, Params.CEILCOUNT, Params.CEILTYPE, Params.INFILLTYPE
+               Return True
+            Case Else
+               Return False
+         End Select
+      End Get
+   End Property
+
+   Public ReadOnly Property IsBeta_Visibility As Visibility
+      Get
+         Return If(bIsBeta, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    Sub New(Type As Params, Cathegory As MachiningCathegory)
       m_Type = Type
       m_Cathegory = Cathegory
       Select Case m_Type
          Case Params.SLICINGTYPE
-            m_sName = "Slicing direction"
+            m_sName = "Slicing Direction"
          Case Params.STRANDH
             m_sName = "Strand Height"
          Case Params.STRANDW
@@ -651,6 +680,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Post Flow Delay"
          Case Params.SCREWBACK
             m_sName = "Screw Back"
+         Case Params.SLICINGHEIGHT
+            m_sName = "Slicing Height"
          Case Params.RIBSTYPE
             m_sName = "Type"
          Case Params.RIBSOVERLAP
@@ -693,6 +724,10 @@ Public MustInherit Class MachiningParam
             m_sName = "Overlap [%]"
          Case Params.AUXSOLIDSINFILL
             m_sName = "Infill"
+         Case Params.AUXSOLIDSINFILLLINK
+            m_sName = "Infill Link"
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            m_sName = "Strand Count"
          Case Params.AUXSOLIDSSTRANDORDER
             m_sName = "Strand Order"
          Case Params.AUXSOLIDSLINKTYPE
@@ -726,7 +761,7 @@ Public MustInherit Class MachiningParam
          Case Params.STRANDOVERLAP
             m_sName = "Strand Overlap [%]"
          Case Params.FLOWRATE_PC
-            m_sName = "Flow rate [%]"
+            m_sName = "Flow Rate [%]"
          Case Params.DYNAMIC_MODE
             m_sName = "Dynamic Mode"
          Case Params.PRINT_ORDER
@@ -739,6 +774,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Ceil Type"
          Case Params.INFILLTYPE
             m_sName = "Infill Type"
+         Case Params.INFILLLINK
+            m_sName = "Link"
          Case Params.INFILLDENSITY
             m_sName = "Density [%]"
          Case Params.INFILLOVERLAP
@@ -854,6 +891,11 @@ Public Class NumericMachiningParam
             m_bIsActiveMinMax = True
          End If
       End If
+      If Type = Params.SLICINGHEIGHT Then
+         m_dMinValue = 0
+         m_dMaxValue = CurrentMachine.dSlicingMaxHeight
+         m_bIsActiveMinMax = True
+      End If
       ' leggo parametri da Db
       If nIndex = 0 Then
          m_dValue = 0
@@ -935,6 +977,9 @@ Public Class NumericMachiningParam
             Case Params.SCREWBACK
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_SCREWBACK, 45)
                m_bIsLen = False
+            Case Params.SLICINGHEIGHT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SLICINGHEIGHT, CurrentMachine.dSlicingMaxHeight)
+               m_bIsLen = False
             Case Params.RIBSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSOVERLAP, 0)
                m_bIsLen = False
@@ -968,6 +1013,9 @@ Public Class NumericMachiningParam
             Case Params.SHELLNBRWIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_SHELLNBRWIPEDIR, 0)
                m_bIsLen = False
+            Case Params.AUXSOLIDSSTRANDCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, 0)
+               m_bIsLen = False
             Case Params.AUXSOLIDSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOVERLAP, 0)
                m_bIsLen = False
@@ -1051,6 +1099,18 @@ Public Class NumericMachiningParam
          Case Params.CEILCOUNT
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.CEILTYPE)
             ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            Dim AuxSolidsInfillParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILL)
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim NumericMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
       End Select
    End Sub
 
@@ -1112,6 +1172,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_POSTFLOWDELAY, sWriteValue, sFilePath)
          Case Params.SCREWBACK
             WriteMachiningParam(nIndex, MAC_SCREWBACK, sWriteValue, sFilePath)
+         Case Params.SLICINGHEIGHT
+            WriteMachiningParam(nIndex, MAC_SLICINGHEIGHT, sWriteValue, sFilePath)
          Case Params.RIBSOVERLAP
             WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue, sFilePath)
          Case Params.RIBSSTRANDCOUNT
@@ -1134,6 +1196,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPE, sWriteValue, sFilePath)
          Case Params.SHELLNBRWIPEDIR
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPEDIR, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSOVERLAP
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSOVERLAP, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSLINKPARAM
@@ -1414,21 +1478,17 @@ Public Class ComboMachiningParam
             Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.RIBSLIMITUNBOUNDEDWITHSOLID)
             CheckMachiningParam.SetIsActive(m_SelValue.Id = MPAR_RIBSTYPE.UNBOUNDED)
          Case Params.AUXSOLIDSINFILL
+            Dim AuxSolidsStrandCountParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDCOUNT)
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
-                                            m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
-                                            m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
-            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
-                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
-            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
-                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
-            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
-                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDENSITY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSGRIDOVERLAP)
@@ -1440,6 +1500,8 @@ Public Class ComboMachiningParam
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
          Case Params.INFILLTYPE
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDENSITY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
@@ -1451,6 +1513,8 @@ Public Class ComboMachiningParam
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
       End Select
    End Sub
 
@@ -1562,6 +1626,10 @@ Public Class CheckMachiningParam
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTINVERT, 0)
             Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, 0)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILLLINK, 0)
+            Case Params.INFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_INFILLLINK, 0)
          End Select
       End If
       m_bOrigValue = m_bValue
@@ -1585,6 +1653,10 @@ Public Class CheckMachiningParam
             WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             WriteMachiningParam(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0), sFilePath)
+         Case Params.AUXSOLIDSINFILLLINK
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0), sFilePath)
+         Case Params.INFILLLINK
+            WriteMachiningParam(nIndex, MAC_INFILLLINK, If(m_bValue, 1, 0), sFilePath)
       End Select
    End Sub
 

Icarus/MachiningDb/MachiningDbV.xaml

@@ -140,9 +140,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
+                                    <StackPanel Orientation="Horizontal">
-                                               Margin="0,0,2.5,0"
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,0,0"
@@ -156,9 +163,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
+                                    <StackPanel Orientation="Horizontal">
-                                               Margin="0,0,2.5,0"
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -175,9 +189,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
+                                    <StackPanel Orientation="Horizontal">
-                                               Margin="0,0,2.5,0"
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/MainWindow/MainWindowM.vb

@@ -191,8 +191,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2506, 1, m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2508, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5583, 2506, 1, m_nKeyOptions)
+                            EgtGetKeyOptions(5583, 2508, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

Icarus/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.6.1")>
+<Assembly: AssemblyVersion("2.5.8.1")>
-<Assembly: AssemblyFileVersion("2.5.6.1")>
+<Assembly: AssemblyFileVersion("2.5.8.1")>

Icarus/ProjManager/ProjManagerVM.vb

@@ -2,6 +2,7 @@
 Imports System.IO
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports Newtonsoft.Json
 
 Public Class ProjManagerVM
    Inherits VMBase
@@ -247,9 +248,37 @@ Public Class ProjManagerVM
    ''' Execute the Save.  This method is invoked by the SaveCommand.
    ''' </summary>
    Public Sub Save()
+      If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
+         CreateJson()
+      End If
       Map.refSceneHostVM.SaveProject()
    End Sub
 
+   Private Function CreateJson() As Boolean
+      ' creo json
+      Dim LayerList As New List(Of JsonLayer)
+      For Each Layer In Map.refTFSEditorVM.LayerList
+         LayerList.Add(Layer.ConvertToJsonLayer())
+      Next
+      Dim json As String = JsonConvert.SerializeObject(LayerList, Formatting.Indented)
+      Dim sProjName As String = ""
+      EgtGetCurrFilePath(sProjName)
+      If Not String.IsNullOrWhiteSpace(sProjName) Then
+         sProjName = Path.ChangeExtension(sProjName, ".json")
+         If File.Exists(sProjName) Then
+            Try
+               File.Delete(sProjName)
+            Catch ex As Exception
+            End Try
+         End If
+         Try
+            File.AppendAllText(sProjName, json)
+         Catch ex As Exception
+            EgtOutLog("Json writing error!")
+         End Try
+      End If
+   End Function
+
 #End Region ' SaveCommand
 
 #Region "SaveAsCommand"
@@ -385,7 +414,7 @@ Public Class ProjManagerVM
             Map.refSceneHostVM.SaveProject()
          End If
          EgtGetCurrFilePath(sCurrProject)
-      ' se modificato, chiedo se si vuole salvare
+         ' se modificato, chiedo se si vuole salvare
       Else
          If EgtGetModified() Then
             If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then

Icarus/SceneHost/MySceneHostVM.vb

@@ -682,6 +682,26 @@ Public Class MySceneHostVM
       Return MainController.ExportProject(SaveFileDialog.FileName, False)
    End Function
 
+   Public Function ExportProjectForMachine(sFilePath As String) As Boolean
+      ' Reset controller e scena
+      MainController.ResetStatus()
+      MainController.SetDefaultFilterForExport(EEX_FLT.MODE_HIDDEN + EEX_FLT.MODE_STD + EEX_FLT.STAT_ON + EEX_FLT.STAT_OFF + EEX_FLT.LEV_TEMP)
+      Return MainController.ExportGeomId(Map.refTopPanelVM.SelPart.nPartId, sFilePath, False)
+   End Function
+   Public Function ExportProjectForMachine(sDirPath As String, b3dm As Boolean, ByRef sFilePath As String) As Boolean
+      sFilePath = sDirPath & "\ProjectSlice" & If(b3dm, ".3dm", ".3mf")
+      ' Reset controller e scena
+      MainController.ResetStatus()
+      MainController.SetDefaultFilterForExport(EEX_FLT.MODE_HIDDEN + EEX_FLT.MODE_STD + EEX_FLT.STAT_ON + EEX_FLT.STAT_OFF + EEX_FLT.LEV_TEMP)
+      Dim nExportGeomId As Integer = 0
+      If b3dm Then
+         If Not ExecPrepare3dmExport(nExportGeomId) Then Return False
+      Else
+         nExportGeomId = Map.refTopPanelVM.SelPart.nPartId
+      End If
+      Return MainController.ExportGeomId(nExportGeomId, sFilePath, False)
+   End Function
+
    Public Overrides Function ExecScript(sFilePath As String) As Boolean
       Dim bOk As Boolean = False
       If String.IsNullOrEmpty(sFilePath) Then

Icarus/SliceManager/SliceManagerVM.vb

@@ -2,6 +2,8 @@
 Imports EgtUILib
 Imports Microsoft.Win32
 Imports System.IO
+Imports Ionic.Zip
+Imports Newtonsoft.Json
 
 Public Class SliceManagerVM
    Inherits VMBase
@@ -705,17 +707,34 @@ Public Class SliceManagerVM
          End If
       End If
       ' eseguo calcoli
-      CalcSlice(True, True)
+      Dim bOk As Boolean = CalcSlice(True, True)
       ' se non ho interrotto calcoli
-      If Not m_bStopScriptToManage Then
+      If bOk AndAlso Not m_bStopScriptToManage Then
-         If bShiftPressed Then
+         ' Se esiste l'iso
-            ' Se esiste ne lancio l'editing
+         If File.Exists(sIsoFilePath) Then
-            If File.Exists(sIsoFilePath) Then
+            If bShiftPressed Then
+               ' Se esiste ne lancio l'editing
                Process.Start("Notepad.exe", sIsoFilePath)
                ' altrimenti lo segnalo
-            Else
-               MessageBox.Show("Edit failed, missing part program file" & " (" & sIsoFilePath & ")")
             End If
+            ' verifico se creare pacchetto
+            If Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.MACHINE_EXPORT) Then
+               'If True Then
+               If Not CreateProjectForMachine(sIsoFilePath) Then
+                  MessageBox.Show("Icrx file generation failed!!", "Error!", MessageBoxButton.OK, MessageBoxImage.Error)
+               End If
+               ' riabilito ProjManager, TopPanel e uscita dal programma
+               Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+               Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+               Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(True)
+               Map.refTFSEditorVM.SetTFSEditorIsEnabled(True)
+               Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+               Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
+               SetButtonsIsEnabled(True)
+            End If
+         Else
+            ' altrimenti lo segnalo
+            MessageBox.Show("Part program generation failed!!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          End If
          NotifyPropertyChanged(NameOf(Time_Visibility))
          NotifyPropertyChanged(NameOf(Mass_Visibility))
@@ -725,6 +744,142 @@ Public Class SliceManagerVM
       m_bCalculating = False
    End Sub
 
+   Private Function CreateProjectForMachine(sIsoFilePath As String) As Boolean
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(False)
+      Map.refTFSEditorVM.SetTFSEditorIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      SetButtonsIsEnabled(False)
+      ' creo cartella file da esportare in Temp
+      Dim sExportTempFolderPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\MachineExport"
+      If Directory.Exists(sExportTempFolderPath) Then
+         Try
+            Directory.Delete(sExportTempFolderPath, True)
+         Catch ex As Exception
+            EgtOutLog("Error! Impossible deleting folder " & sExportTempFolderPath & "!")
+            Return False
+         End Try
+      End If
+      Try
+         Directory.CreateDirectory(sExportTempFolderPath)
+      Catch ex As Exception
+         EgtOutLog("Error! Impossible creating folder " & sExportTempFolderPath & "!")
+         Return False
+      End Try
+      ' mostro solido per eportazione
+      Dim SolidCheck As ViewLayer = Map.refViewLayerManagerVM.LayerList.FirstOrDefault(Function(x) x.Type = ViewLayer.ViewLayerType.SOLID_SLICE)
+      Dim CurrSolidCheckValue As Boolean? = SolidCheck.bIsVisible
+      If IsNothing(SolidCheck.bIsVisible) OrElse Not SolidCheck.bIsVisible Then
+         SolidCheck.bIsVisible = True
+      End If
+      ' esporto file progetto
+      Dim sFileExtension As String
+      If True Then
+         sFileExtension = ".3dm"
+      Else
+         sFileExtension = ".3mf"
+      End If
+      Dim s3dFilePath As String = ""
+      If Not Map.refSceneHostVM.ExportProjectForMachine(sExportTempFolderPath, True, s3dFilePath) Then
+         EgtOutLog("Error! Impossible exporting 3mf file!")
+         Return False
+      End If
+      '' esporto file 3mf
+      'Dim s3mfPath As String = sExportTempFolderPath & "\ProjectSlice.3mf"
+      'If Not Map.refSceneHostVM.ExportProjectForMachine(s3mfPath) Then
+      '   EgtOutLog("Error! Impossible exporting 3mf file!")
+      '   Return False
+      'End If
+      ' creo file json
+      Dim sProjName As String = ""
+      EgtGetCurrFilePath(sProjName)
+      Dim sJsonPath As String = sExportTempFolderPath & "\ProjectSlice.json"
+      CreateJson(sJsonPath)
+      ' creo immagine preview
+      Dim sPreviewImagePath As String = sExportTempFolderPath & "\ProjectSlice.png"
+      CreatePreviewImage(sPreviewImagePath)
+      ' nascondo solido
+      If IsNothing(CurrSolidCheckValue) OrElse Not CurrSolidCheckValue Then
+         SolidCheck.bIsVisible = CurrSolidCheckValue
+      End If
+      ' creo path dello zip
+      Dim sZipPath As String = Path.ChangeExtension(sProjName, ".icrx")
+      ' se esiste gia' lo cancello
+      If File.Exists(sZipPath) Then
+         Try
+            File.Delete(sZipPath)
+         Catch ex As Exception
+            EgtOutLog("Error! Impossible deleting old icrx file!")
+            Return False
+         End Try
+      End If
+      Try
+         Using zip As New Ionic.Zip.ZipFile(sZipPath, Console.Out)
+            zip.AlternateEncodingUsage = ZipOption.Always
+            zip.AlternateEncoding = Text.Encoding.UTF8
+            zip.CompressionMethod = CompressionMethod.None
+            ' aggiungo file Iso
+            zip.AddItem(sIsoFilePath, "").FileName = "ProjectSlice" & Path.GetExtension(sIsoFilePath)
+            ' aggiungo file 3mf
+            zip.AddItem(s3dFilePath, "")
+            ' aggiungo json
+            zip.AddItem(sJsonPath, "")
+            ' aggiungo immagine preview
+            zip.AddItem(sPreviewImagePath, "")
+            ' salvo lo zip
+            zip.Save()
+         End Using
+      Catch ex As Exception
+         EgtOutLog("Error! Icrx file generation failed!!")
+         Return False
+      End Try
+      ' elimino tutti i file temporanei creati
+      If Directory.Exists(sExportTempFolderPath) Then
+         Directory.Delete(sExportTempFolderPath, True)
+      End If
+      Return True
+   End Function
+
+   Private Function CreateJson(sJsonPath As String) As Boolean
+      ' creo json
+      Dim JsonMain As New JsonMain(m_dTime, m_dMass)
+      Dim json As String = JsonConvert.SerializeObject(JsonMain, Formatting.Indented)
+      If File.Exists(sJsonPath) Then
+         Try
+            File.Delete(sJsonPath)
+         Catch ex As Exception
+            EgtOutLog("Error! Impossible deleting file " & sJsonPath & "!")
+            Return False
+         End Try
+      End If
+      Try
+         File.AppendAllText(sJsonPath, json)
+      Catch ex As Exception
+         EgtOutLog("Error! Impossible writing json file " & sJsonPath & "!")
+         Return False
+      End Try
+      Return True
+   End Function
+
+   Private Function CreatePreviewImage(sPreviewImagePath As String) As Boolean
+      ' recupero posizione vista corrente
+      Dim nCurrAngVertDeg As Integer = 0
+      Dim nCurrAngHorizDeg As Integer = 0
+      EgtGetGenericView(nCurrAngVertDeg, nCurrAngHorizDeg)
+      EgtSetView(VT.ISO_SW, False)
+      SetTableVisibility(False)
+      EgtZoom(ZM.ALL, False)
+      'EgtExportSvg(GDB_ID.ROOT, sPreviewImagePath)
+      EgtGetImage(SM.SHADING, New Color3d(255, 255, 255, 255), New Color3d(255, 255, 255, 255), 3000, 3000, sPreviewImagePath)
+      EgtSetGenericView(nCurrAngVertDeg, nCurrAngHorizDeg, False)
+      SetTableVisibility(True)
+      EgtZoom(ZM.ALL, True)
+      Return True
+   End Function
+
 #End Region ' Generate
 
 #Region "Simulate"

Icarus/SliderManager/SliderManagerVM.vb

@@ -20,23 +20,22 @@ Public Class SliderManagerVM
       End Get
       Set(value As Integer)
          If IsNothing(Map.refTopPanelVM.SelPart) Then Return
+         Dim DisableMgr As New DisableModifiedMgr
          Select Case m_nSelViewSlider
             Case ViewSliderType.ONLY_SELECTED
-               ' se diverso da nullo nascondo precedente
+               ' nascondo precedente
-               If Not IsNothing(Map.refTopPanelVM.SelPart) Then
+               ' riporto vecchio strato a visualizzazione di tutti i solidi
-                  ' riporto vecchio strato a visualizzazione di tutti i solidi
+               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
-                  If m_nLayerIndex > 0 Then dLayerAdvancement = 100
+               If m_nLayerIndex = 0 Then
-                  If m_nLayerIndex = 0 Then
+                  For Each Layer In Map.refTopPanelVM.SelPart.LayerList
-                     For Each Layer In Map.refTopPanelVM.SelPart.LayerList
+                     EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
-                        EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
+                  Next
-                     Next
+               ElseIf m_nLayerIndex > 0 Then
-                  ElseIf m_nLayerIndex > 0 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.OFF)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.OFF)
-                  End If
                End If
                m_nLayerIndex = value
                ' se diverso da nullo visualizzo corrente
-               If Not IsNothing(Map.refTopPanelVM.SelPart) AndAlso m_nLayerIndex > 0 Then EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.ON_)
+               If m_nLayerIndex > 0 Then EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.ON_)
                ' porto barra nuovo strato a 100 
                If m_nLayerIndex > 0 Then SetLayerAdvancement(100)
             Case ViewSliderType.UNTIL_SELECTED
@@ -64,6 +63,7 @@ Public Class SliderManagerVM
                End If
                m_nLayerIndex = value
          End Select
+         DisableMgr.ReEnable()
          NotifyPropertyChanged(NameOf(ghShowValue))
          NotifyPropertyChanged(NameOf(ghValueIndex))
          NotifyPropertyChanged(NameOf(ghValueHeight))
@@ -71,47 +71,44 @@ Public Class SliderManagerVM
       End Set
    End Property
    Private Sub SetLayerIndex(value As Integer)
+      If IsNothing(Map.refTopPanelVM.SelPart) Then Return
+      Dim DisableMgr As New DisableModifiedMgr
       Select Case m_nSelViewSlider
          Case ViewSliderType.ONLY_SELECTED
-            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
+            ' riporto vecchio strato a visualizzazione di tutti i solidi
-               ' riporto vecchio strato a visualizzazione di tutti i solidi
+            If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
-               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
+            For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
-               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
+               If nLayerInd = value - 1 Then
-                  If nLayerInd = value - 1 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
+               Else
-                  Else
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
+               End If
-                  End If
+            Next
-               Next
-            End If
             m_nLayerIndex = value
          Case ViewSliderType.UNTIL_SELECTED
-            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
+            ' riporto vecchio strato a visualizzazione di tutti i solidi
-               ' riporto vecchio strato a visualizzazione di tutti i solidi
+            If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
-               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
+            For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
-               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
+               If nLayerInd <= value - 1 Then
-                  If nLayerInd <= value - 1 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
+               Else
-                  Else
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
+               End If
-                  End If
+            Next
-               Next
-            End If
             m_nLayerIndex = value
          Case ViewSliderType.FROM_SELECTED
-            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
+            ' riporto vecchio strato a visualizzazione di tutti i solidi
-               ' riporto vecchio strato a visualizzazione di tutti i solidi
+            If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
-               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
+            For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
-               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
+               If nLayerInd >= value - 1 Then
-                  If nLayerInd >= value - 1 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
+               Else
-                  Else
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
+               End If
-                  End If
+            Next
-               Next
-            End If
             m_nLayerIndex = value
       End Select
+      DisableMgr.ReEnable()
       NotifyPropertyChanged(NameOf(nLayerIndex))
       NotifyPropertyChanged(NameOf(ghShowValue))
       NotifyPropertyChanged(NameOf(ghValueIndex))
@@ -201,6 +198,8 @@ Public Class SliderManagerVM
          Return m_dLayerAdvancement
       End Get
       Set(value As Double)
+         If IsNothing(Map.refTopPanelVM.SelPart) Then Return
+         Dim DisableMgr As New DisableModifiedMgr
          Select Case m_nSelViewSlider
             Case ViewSliderType.ONLY_SELECTED
                Dim nTotSolid As Integer = 0
@@ -247,6 +246,7 @@ Public Class SliderManagerVM
                End If
                m_dLayerAdvancement = value
          End Select
+         DisableMgr.ReEnable()
          EgtDraw()
       End Set
    End Property
@@ -335,6 +335,7 @@ Public Class SliderManagerVM
          WriteMainPrivateProfileString(S_PRINTING3D, K_VIEWSLIDER, m_nSelViewSlider)
          ' ciclo tutti i layer per nasconderli/mostrarli
          If IsNothing(Map.refTopPanelVM.SelPart) OrElse IsNothing(Map.refTopPanelVM.SelPart.LayerList) Then Return
+         Dim DisableMgr As New DisableModifiedMgr
          Select Case m_nSelViewSlider
             Case ViewSliderType.ONLY_SELECTED
                For Each Layer In Map.refTopPanelVM.SelPart.LayerList
@@ -361,6 +362,7 @@ Public Class SliderManagerVM
                   End If
                Next
          End Select
+         DisableMgr.ReEnable()
          ' mostro/nascondo slider orizzontale
          m_LayerAdvancement_Visibility = If(m_nSelViewSlider = ViewSliderType.ONLY_SELECTED, Visibility.Visible, Visibility.Hidden)
          NotifyPropertyChanged(NameOf(LayerAdvancement_Visibility))

Icarus/TSFEditor/TFSEditorVM.vb

@@ -962,4 +962,8 @@ Public Class TFSLayer
       Return If(dHours > 0, dHours.ToString("00") & ":", "") & If(dHours > 0, dMinutes.ToString("00"), dMinutes.ToString()) & ":" & dSeconds.ToString("00")
    End Function
 
+   Friend Function ConvertToJsonLayer() As JsonLayer
+      Return New JsonLayer(nIndex, dLength, dTMin, m_dTTrg, dTMax, dTCurr, m_dTWait, dFCurr, m_dFTrg, m_dFMax, m_dFCurr, dSpeed)
+   End Function
+
 End Class

Icarus/TopPanel/TopPanelVM.vb

@@ -274,7 +274,27 @@ Public Class TopPanelVM
             WriteMainPrivateProfileString(S_PRINTING3D, K_CURRMACHINING, value.sGUID.ToString())
             ' imposto selezionata come corrente
             If Not IsNothing(m_SelPart) AndAlso (IsNothing(m_SelMachining) OrElse value.sGUID <> m_SelMachining.sGUID) Then
+               Dim GeneralCathegory As MachiningCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               Dim OldSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               Dim NewSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     OldSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
                Map.refCurrMachiningPanelVM.SetCurrMachining(New CurrMachining(m_SelPart.nPartId, value.nIndex))
+               GeneralCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     NewSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
+               If IsNothing(OldSlicingTypeValue) OrElse IsNothing(NewSlicingTypeValue) OrElse OldSlicingTypeValue <> NewSlicingTypeValue Then
+                  ' aggiorno area di estrusione
+                  CurrentMachine.UpdateExtrusionArea()
+               End If
             End If
          End If
          m_SelMachining = value

Icarus/Utility/CurrentMachine.vb

@@ -79,6 +79,14 @@ Public Module CurrentMachine
       End Get
    End Property
 
+   ' altezza massima di estrusione impostata in file ini macchina
+   Private m_dSlicingMaxHeight As Double
+   Public ReadOnly Property dSlicingMaxHeight As Double
+      Get
+         Return m_dSlicingMaxHeight
+      End Get
+   End Property
+
 #Region "Init"
 
    Sub InitCurrentMachine(sMachinesRootDir As String, sMachineName As String)
@@ -97,6 +105,8 @@ Public Module CurrentMachine
       m_sMachiningFilePath = sMachinesRootDir & "\" & sMachineName & "\Machinings\Machinings.ini"
       ' impostazione cartella materiali
       m_sMaterialFilePath = sMachinesRootDir & "\" & sMachineName & "\Materials\Materials.ini"
+      ' leggo altezza massima estrusione impostata su macchina
+      m_dSlicingMaxHeight = GetPrivateProfileDouble(S_MACH_PRINTING3D, K_MAX_HEIGHT, 900, m_sMachIniFile)
       ' Disabilito segnalazione modificato
       Dim DisableMgr As New DisableModifiedMgr
       ' recupero box macchina
@@ -146,19 +156,30 @@ Public Module CurrentMachine
       DisableMgr.ReEnable()
    End Sub
 
+   Public Sub SetTableVisibility(IsVisible As Boolean)
+      Dim nTableLayerId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+      EgtSetStatus(nTableLayerId, If(IsVisible, GDB_ST.ON_, GDB_ST.OFF))
+   End Sub
+
    Public Sub UpdateExtrusionArea()
+      Dim DisableMgr As New DisableModifiedMgr
       ' recupero eventuale vecchia area di estrusione
       Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
       Dim nTabLayerId As Integer = EgtGetFirstNameInGroup(nTabPartId, TABLE)
       Dim nExtrusionAreaId As Integer = EgtGetFirstNameInGroup(nTabLayerId, EXTRUSION_AREA)
-      If nExtrusionAreaId <> GDB_ID.NULL Then
+      If nExtrusionAreaId <> GDB_ID.NULL Then EgtErase(nExtrusionAreaId)
-         ' e la cancello
+      Dim nExtrusionRectId As Integer = EgtGetFirstNameInGroup(nTabLayerId, EXTRUSION_RECT)
-         EgtErase(nExtrusionAreaId)
+      If nExtrusionRectId <> GDB_ID.NULL Then EgtErase(nExtrusionRectId)
-      End If
       ' se lavorazione corrente nulla, esco
-      If IsNothing(Map.refTopPanelVM.CurrMachining) Then Return
+      If IsNothing(Map.refTopPanelVM.CurrMachining) Then
+         DisableMgr.ReEnable() 
+         Return
+      End If
       ' se non esiste file dati macchina, esco
-      If String.IsNullOrWhiteSpace(m_sMachDataIniFile) Then Return
+      If String.IsNullOrWhiteSpace(m_sMachDataIniFile) Then
+         DisableMgr.ReEnable()
+         Return
+      End If
       ' recupero tipo di slice
       Dim sExtrusionType As String = S_VERTICAL
       Dim GeneralCathegory As MachiningCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
@@ -178,12 +199,19 @@ Public Module CurrentMachine
       Dim dExtrXMin = GetPrivateProfileDouble(sExtrusionType, K_MINX, 0, m_sMachDataIniFile)
       Dim dExtrYMax = GetPrivateProfileDouble(sExtrusionType, K_MAXY, 0, m_sMachDataIniFile)
       Dim dExtrYMin = GetPrivateProfileDouble(sExtrusionType, K_MINY, 0, m_sMachDataIniFile)
-      nExtrusionAreaId = EgtCreateRectangle2P(nTabLayerId, New Point3d(dExtrXMin, dExtrYMin, 0), New Point3d(dExtrXMax, dExtrYMax, 0))
+      Const AREA_WIDTH As Double = 10
+      Dim nAuxRectId As Integer = EgtCreateRectangle2P(nTabLayerId, New Point3d(dExtrXMin - AREA_WIDTH, dExtrYMin - AREA_WIDTH, 0), New Point3d(dExtrXMax + AREA_WIDTH, dExtrYMax + AREA_WIDTH, 0))
+      nExtrusionRectId = EgtCreateRectangle2P(nTabLayerId, New Point3d(dExtrXMin, dExtrYMin, 0), New Point3d(dExtrXMax, dExtrYMax, 0))
+      nExtrusionAreaId = EgtCreateSurfTmByRegion( nTabLayerId, { nAuxRectId, nExtrusionRectId}, EPS_STM)
+      EgtErase( nAuxRectId)
       Dim c3Temp As New Color3d
       c3Temp.FromColor(System.Drawing.Color.Lime)
       EgtSetColor(nExtrusionAreaId, c3Temp)
       EgtSetName(nExtrusionAreaId, EXTRUSION_AREA)
+      EgtSetColor(nExtrusionRectId, c3Temp)
+      EgtSetName(nExtrusionRectId, EXTRUSION_RECT)
       m_b3ExtrusionArea = New BBox3d(New Point3d(dExtrXMin, dExtrYMin, 0), New Point3d(dExtrXMax, dExtrYMax, 0))
+      DisableMgr.ReEnable()
       EgtDraw()
    End Sub
 

Icarus/Utility/JsonUtility.vb

@@ -0,0 +1,205 @@
+Imports EgtUILib.EgtInterface
+Imports EgtWPFLib5
+
+Public Class JsonMain
+
+   Private m_StrandW As Double
+   Public ReadOnly Property StrandW As Double
+      Get
+         Return m_StrandW
+      End Get
+   End Property
+
+   Private m_StrandH As Double
+   Public ReadOnly Property StrandH As Double
+      Get
+         Return m_StrandH
+      End Get
+   End Property
+
+   Private m_BoxX As Double
+   Public ReadOnly Property BoxX As Double
+      Get
+         Return m_BoxX
+      End Get
+   End Property
+
+   Private m_BoxY As Double
+   Public ReadOnly Property BoxY As Double
+      Get
+         Return m_BoxY
+      End Get
+   End Property
+
+   Private m_BoxZ As Double
+   Public ReadOnly Property BoxZ As Double
+      Get
+         Return m_BoxZ
+      End Get
+   End Property
+
+   Private m_dTime As Double
+   Public ReadOnly Property dTime As Double
+      Get
+         Return m_dTime
+      End Get
+   End Property
+
+   Private m_dMass As Double = 0
+   Public ReadOnly Property dMass As Double
+      Get
+         Return m_dMass
+      End Get
+   End Property
+
+   Private m_LayerQty As Double
+   Public ReadOnly Property LayerQty As Double
+      Get
+         Return m_LayerQty
+      End Get
+   End Property
+
+   Private m_MaterialName As String
+   Public ReadOnly Property MaterialName As String
+      Get
+         Return m_MaterialName
+      End Get
+   End Property
+
+   Private m_JsonLayerList As New List(Of JsonLayer)
+   Public ReadOnly Property JsonLayerList As List(Of JsonLayer)
+      Get
+         Return m_JsonLayerList
+      End Get
+   End Property
+
+   Sub New(dTime As Double, dMass As Double)
+      For Each Layer In Map.refTFSEditorVM.LayerList
+         m_JsonLayerList.Add(Layer.ConvertToJsonLayer())
+      Next
+      m_MaterialName = Map.refTopPanelVM.SelMaterial.sName
+      Dim GeneralCathegory As MachiningCathegory = Map.refCurrMachiningPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+      If Not IsNothing(GeneralCathegory) Then
+         Dim StrandW As CurrNumericMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.STRANDW)
+         Dim StrandH As CurrNumericMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.STRANDH)
+         If Not IsNothing(StrandW) Then
+            m_StrandW = StrandW.dValue
+         End If
+         If Not IsNothing(StrandH) Then
+            m_StrandH = StrandH.dValue
+         End If
+      End If
+      m_dTime = dTime
+      m_dMass = dMass
+      If Not IsNothing(Map.refTopPanelVM.SelPart) Then
+         Dim b3Print As BBox3d = Map.refDispositionPanelVM.GetSolidForReferenceBBox(Map.refTopPanelVM.SelPart)
+         m_BoxX = b3Print.DimX
+         m_BoxY = b3Print.DimY
+         m_BoxZ = b3Print.DimZ
+      End If
+      m_LayerQty = Map.refSliderManagerVM.nLayerIndex_Maximum
+   End Sub
+
+End Class
+
+Public Class JsonLayer
+   Private m_nIndex As Integer
+   Public ReadOnly Property Index As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_dLength As Double
+   Public ReadOnly Property Length As Double
+      Get
+         Return m_dLength
+      End Get
+   End Property
+
+   Private m_dTMin As Double
+   Public ReadOnly Property TMin As Double
+      Get
+         Return m_dTMin
+      End Get
+   End Property
+
+   Private m_dTTrg As Double
+   Public ReadOnly Property TTrg As Double
+      Get
+         Return m_dTTrg
+      End Get
+   End Property
+
+   Private m_dTMax As Double
+   Public ReadOnly Property TMax As Double
+      Get
+         Return m_dTMax
+      End Get
+   End Property
+
+   Private m_dTCurr As Double
+   Public ReadOnly Property TCurr As Double
+      Get
+         Return m_dTCurr
+      End Get
+   End Property
+
+   Private m_dTWait As Double
+   Public ReadOnly Property TWait As Double
+      Get
+         Return m_dTWait
+      End Get
+   End Property
+
+   Private m_dFMin As Double
+   Public ReadOnly Property FMin As Double
+      Get
+         Return m_dFMin
+      End Get
+   End Property
+
+   Private m_dFTrg As Double
+   Public ReadOnly Property FTrg As Double
+      Get
+         Return m_dFTrg
+      End Get
+   End Property
+
+   Private m_dFMax As Double
+   Public ReadOnly Property FMax As Double
+      Get
+         Return m_dFMax
+      End Get
+   End Property
+
+   Private m_dFCurr As Double
+   Public ReadOnly Property FCurr As Double
+      Get
+         Return m_dFCurr
+      End Get
+   End Property
+
+   Private m_dSpeed As Double
+   Public ReadOnly Property Speed As Double
+      Get
+         Return m_dSpeed
+      End Get
+   End Property
+
+   Sub New(nIndex As Integer, dLength As Double, dTMin As Double, dTTrg As Double, dTMax As Double, dTCurr As Double, dTWait As Double, dFMin As Double, dFTrg As Double, dFMax As Double, dFCurr As Double, dSpeed As Double)
+      m_nIndex = nIndex
+      m_dLength = dLength
+      m_dTMin = dTMin
+      m_dTTrg = dTTrg
+      m_dTMax = dTMax
+      m_dTCurr = dTCurr
+      m_dTWait = dTWait
+      m_dFMin = dFMin
+      m_dFTrg = dFTrg
+      m_dFMax = dFMax
+      m_dFCurr = dFCurr
+      m_dSpeed = dSpeed
+   End Sub
+
+End Class

Icarus/Utility/LuaExec.vb

@@ -115,4 +115,18 @@ Module LuaExec
       Return bOk
    End Function
 
+   Friend Function ExecPrepare3dmExport(ByRef nExportGeomId As Integer) As Boolean
+      Dim bOk As Boolean = True
+      EgtLuaCreateGlobTable("PRINT")
+      EgtLuaSetGlobStringVar("PRINT.BASEDIR", Map.refMainWindowVM.MainWindowM.s3dPrintingDir)
+      bOk = EgtLuaExecFile(Map.refMainWindowVM.MainWindowM.s3dPrintingDir & "\PrepareExport.lua")
+      If bOk Then
+         EgtLuaGetGlobIntVar("PRINT.EXPORTLAYER", nExportGeomId)
+      End If
+      ' Cancello tavola globale
+      EgtLuaResetGlobVar("PRINT")
+      Return bOk
+   End Function
+
+
 End Module

Icarus/ViewLayerManager/ViewLayerManagerVM.vb

@@ -35,7 +35,7 @@ Public Class ViewLayerManagerVM
    End Sub
 
    Sub New()
-      ' Creo riferimento a questa classe in EgtCAM5Map
+      ' Creo riferimento a questa classe in Map
       Map.SetRefViewLayerManagerVM(Me)
       m_LayerList = New ObservableCollection(Of ViewLayer)({New ViewLayer(ViewLayer.ViewLayerType.PRINT_SOLID, "Print", True),
                                                             New ViewLayer(ViewLayer.ViewLayerType.REFERENCE, "Origin Point", True),
@@ -150,8 +150,8 @@ Public Class ViewLayer
    End Sub
 
    Friend Sub UpdateVisibility(bIsVisible As Boolean)
-      ' Disabilito segnalazione modificato
+      Dim DisableMgr As New DisableModifiedMgr
-      Dim DisableMgr As New DisableModifiedMgr ' se solidi
+      ' se solidi
       If m_Type = ViewLayerType.SOLID_SLICE Then
          If Map.refSceneHostVM.MainController.GetStep() = 0 Then
             ' aggiorno parametro di calcolo solidi sui pezzi
@@ -242,7 +242,6 @@ Public Class ViewLayer
             Next
          Next
       End If
-      ' Ripristino stato segnalazione modifica
       DisableMgr.ReEnable()
    End Sub
 

Icarus/packages.config

@@ -1,4 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
   <package id="Ionic.Zip" version="1.9.1.8" targetFramework="net472" />
+  <package id="Newtonsoft.Json" version="13.0.3" targetFramework="net472" />
 </packages>