- Correzione su import/export machining

- aggiunta modifica con selezione dei tempi wait

Icarus.sln

@@ -3,18 +3,24 @@ Microsoft Visual Studio Solution File, Format Version 12.00
 # Visual Studio Version 16
 VisualStudioVersion = 16.0.32002.261
 MinimumVisualStudioVersion = 10.0.40219.1
-Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "Icarus", "Icarus/Icarus.vbproj", "{BCDE0368-2C69-4948-8723-D0FE71417986}"
+Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "Icarus", "Icarus\Icarus.vbproj", "{BCDE0368-2C69-4948-8723-D0FE71417986}"
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		Debug|x64 = Debug|x64
+		Debug|x86 = Debug|x86
 		Release|x64 = Release|x64
+		Release|x86 = Release|x86
 	EndGlobalSection
 	GlobalSection(ProjectConfigurationPlatforms) = postSolution
 		{BCDE0368-2C69-4948-8723-D0FE71417986}.Debug|x64.ActiveCfg = Debug|x64
 		{BCDE0368-2C69-4948-8723-D0FE71417986}.Debug|x64.Build.0 = Debug|x64
+		{BCDE0368-2C69-4948-8723-D0FE71417986}.Debug|x86.ActiveCfg = Debug|x86
+		{BCDE0368-2C69-4948-8723-D0FE71417986}.Debug|x86.Build.0 = Debug|x86
 		{BCDE0368-2C69-4948-8723-D0FE71417986}.Release|x64.ActiveCfg = Release|x64
 		{BCDE0368-2C69-4948-8723-D0FE71417986}.Release|x64.Build.0 = Release|x64
+		{BCDE0368-2C69-4948-8723-D0FE71417986}.Release|x86.ActiveCfg = Release|x86
+		{BCDE0368-2C69-4948-8723-D0FE71417986}.Release|x86.Build.0 = Release|x86
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE

Icarus/Constants/Const3dPrint.vb

@@ -36,6 +36,7 @@
    Public Const KEY_SPEED = "Speed"
    Public Const KEY_SLICEID = "SliceId"
    Public Const KEY_MASS = "PrintMass"
+   Public Const KEY_EMITWAITINGTIME = "EmitWaitingTime"
 
 
    ' parametri Materiali
@@ -95,6 +96,7 @@
    Public Const MAC_WIPEDIR = "WipeDir"
    Public Const MAC_FLOORCOUNT = "FloorCount"
    Public Const MAC_G0FEED = "G0Feed"
+   Public Const MAC_G0FEEDZ = "G0FeedZ"
    Public Const MAC_TOOLDIAM = "ToolDiam"
    Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"

Icarus/Constants/ConstIni.vb

@@ -113,6 +113,14 @@ Public Module ConstIni
    Public Const K_VIEWSLIDER As String = "ViewSlider"
    Public Const K_IMPORTCURREXTENSION As String = "ImportCurrExtension"
 
+   Public Const S_COLORS As String = "Colors"
+   Public Const K_CLR_PRINTPART As String = "PrintPart"
+   Public Const K_CLR_RIBS As String = "Ribs"
+   Public Const K_CLR_SHELLNUMBERS As String = "ShellNumbers"
+   Public Const K_CLR_AUXSOLIDS As String = "AuxSolids"
+   Public Const K_CLR_MACHSTART As String = "MachStart"
+   Public Const K_CLR_OTHERS As String = "Others"
+
    Public Const S_MRUFILES As String = "MruFiles"
    Public Const S_MRUIMPORTFILES As String = "MruImportFiles"
 

Icarus/Constants/ConstMachIni.vb

@@ -32,7 +32,7 @@
    Public Const K_MACH_EXITSCRIPT As String = "ExitScript"
 
    Public Const S_MACH_PRINTING3D As String = "3dPrinting"
-   Public Const K_HORIZONTAL_PRINT As String = "HorizontalPrint"
+   Public Const K_SLICINGTYPE As String = "SlicingType"
    Public Const K_SPEED_MIN As String = "SpeedMin"
    Public Const K_SPEED_MAX As String = "SpeedMax"
 

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -194,6 +194,7 @@ Public Class CurrMachiningCathegory
                                                                 New CurrComboMachiningParam(MachiningParam.Params.DIRECTION, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEED, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.G0FEEDZ, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.TOOLDIAM, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.FLOWRATE_PC, nPartId, nIndex, bForceFromDb)})
          Case Cathegories.LINK
@@ -273,13 +274,13 @@ Public Class CurrNumericMachiningParam
 
    Public Overrides Property sValue As String
       Get
-         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString( m_dValue, 2))
+         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString(m_dValue, 2))
       End Get
       Set(value As String)
          If m_bIsLen Then
             StringToLen(value, m_dValue)
          Else
-            StringToDouble( value, m_dValue)
+            StringToDouble(value, m_dValue)
          End If
          NotifyPropertyChanged(NameOf(sValue))
          NotifyPropertyChanged(NameOf(bIsModifiedFromDb))
@@ -366,6 +367,9 @@ Public Class CurrNumericMachiningParam
          Case Params.G0FEED
             bReadFromPart = EgtGetInfo(nPartId, MAC_G0FEED, m_dValue)
             m_bIsLen = True
+         Case Params.G0FEEDZ
+            bReadFromPart = EgtGetInfo(nPartId, MAC_G0FEEDZ, m_dValue)
+            m_bIsLen = True
          Case Params.TOOLDIAM
             bReadFromPart = EgtGetInfo(nPartId, MAC_TOOLDIAM, m_dValue)
             m_bIsLen = True
@@ -429,7 +433,7 @@ Public Class CurrNumericMachiningParam
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
             Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
-                 Params.FLOORCOUNT, Params.G0FEED, Params.TOOLDIAM, Params.FLOWRATE_PC
+                 Params.FLOORCOUNT, Params.G0FEED, Params.G0FEEDZ, Params.TOOLDIAM, Params.FLOWRATE_PC
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.LINKZUP, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
                  Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
@@ -503,6 +507,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_FLOORCOUNT, sWriteValue)
          Case Params.G0FEED
             EgtSetInfo(nPartId, MAC_G0FEED, sWriteValue)
+         Case Params.G0FEEDZ
+            EgtSetInfo(nPartId, MAC_G0FEEDZ, sWriteValue)
          Case Params.TOOLDIAM
             EgtSetInfo(nPartId, MAC_TOOLDIAM, sWriteValue)
          Case Params.RIBSOVERLAP
@@ -677,11 +683,16 @@ Public Class CurrComboMachiningParam
       Dim bReadFromPart As Boolean = False
       Select Case Type
          Case Params.SLICINGTYPE
-            Dim nHorizontalPrint As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_HORIZONTAL_PRINT, 0, CurrentMachine.sMachIniFile)
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical"),
-                                                     New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°")})
-            If nHorizontalPrint > 0 Then
-               m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
+            Dim nSlicingType As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_SLICINGTYPE, 0, CurrentMachine.sMachIniFile)
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical")})
+            If nSlicingType >= 1 Then
+               m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45deg X"))
+               If nSlicingType >= 2 Then
+                  m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45_Y, "45deg Y"))
+                  If nSlicingType >= 3 Then
+                     m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
+                  End If
+               End If
             End If
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGTYPE, nSelValue)

Icarus/DispositionPanel/DispositionPanelV.xaml

@@ -186,15 +186,15 @@
          <UniformGrid Columns="3">
             <RadioButton Content="X"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[0]}"
+                            IsChecked="{Binding RotX}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
             <RadioButton Content="Y"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[1]}"
+                            IsChecked="{Binding RotY}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
             <RadioButton Content="Z"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[2]}"
+                            IsChecked="{Binding RotZ}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
          </UniformGrid>
          <EgtWPFLib5:EgtTextBox Grid.Row="1"

Icarus/DispositionPanel/DispositionPanelVM.vb

@@ -21,12 +21,12 @@ Public Class DispositionPanelVM
          Dim dNewXPos As Double = ptReference.x
          StringToLen(value, dNewXPos)
          If dNewXPos >= 0 AndAlso dNewXPos <= CurrentMachine.b3Tab.DimX Then
-            EgtMove(Map.refTopPanelVM.SelPart.nPartId, New Point3d(dNewXPos, ptReference.y, ptReference.z) - ptReference)
+            EgtMove(Map.refTopPanelVM.SelPart.nPartId, New Point3d(dNewXPos, ptReference.y, ptReference.z) - ptReference, GDB_RT.GLOB)
+            Map.refReferencePanelVM.UpdateFramePosition()
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sXPos))
          End If
-         Map.refReferencePanelVM.UpdateFramePosition()
       End Set
    End Property
 
@@ -46,12 +46,12 @@ Public Class DispositionPanelVM
          Dim dNewYPos As Double = ptReference.y
          StringToLen(value, dNewYPos)
          If dNewYPos >= 0 AndAlso dNewYPos <= CurrentMachine.b3Tab.DimY Then
-            EgtMove(Map.refTopPanelVM.SelPart.nPartId, New Point3d(ptReference.x, dNewYPos, ptReference.z) - ptReference)
+            EgtMove(Map.refTopPanelVM.SelPart.nPartId, New Point3d(ptReference.x, dNewYPos, ptReference.z) - ptReference, GDB_RT.GLOB)
+            Map.refReferencePanelVM.UpdateFramePosition()
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sYPos))
          End If
-         Map.refReferencePanelVM.UpdateFramePosition()
       End Set
    End Property
 
@@ -71,22 +71,38 @@ Public Class DispositionPanelVM
          Dim dNewZPos As Double = ptReference.z
          StringToLen(value, dNewZPos)
          If dNewZPos >= 0 Then
-            EgtMove(Map.refTopPanelVM.SelPart.nPartId, New Point3d(ptReference.x, ptReference.y, dNewZPos) - ptReference)
+            EgtMove(Map.refTopPanelVM.SelPart.nPartId, New Point3d(ptReference.x, ptReference.y, dNewZPos) - ptReference, GDB_RT.GLOB)
+            Map.refReferencePanelVM.UpdateFramePosition()
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sZPos))
          End If
-         Map.refReferencePanelVM.UpdateFramePosition()
       End Set
    End Property
 
-   Private m_RotAxes() As Boolean = {False, False, True}
-   Public Property RotAxes As Boolean()
+   Private m_RotAxes As Boolean() = { False, False, False}
+   Public Property RotX As Boolean
       Get
-         Return m_RotAxes
+         Return m_RotAxes(0)
       End Get
-      Set(value As Boolean())
-         m_RotAxes = value
+      Set(value As Boolean)
+         m_RotAxes(0) = value
+      End Set
+   End Property
+   Public Property RotY As Boolean
+      Get
+         Return m_RotAxes(1)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(1) = value
+      End Set
+   End Property
+   Public Property RotZ As Boolean
+      Get
+         Return m_RotAxes(2)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(2) = value
       End Set
    End Property
 
@@ -96,7 +112,7 @@ Public Class DispositionPanelVM
             Return Vector3d.X_AX
          ElseIf m_RotAxes(1) Then
             Return Vector3d.Y_AX
-         ElseIf m_RotAxes(2) Then
+         Else
             Return Vector3d.Z_AX
          End If
       End Get
@@ -109,22 +125,33 @@ Public Class DispositionPanelVM
       End Get
       Set(value As String)
          Dim dNewAngle As Double = 0
-         If Not StringToLen(value, dNewAngle) Then
+         If IsNothing( value) OrElse Not StringToLen(value, dNewAngle) Then
             m_sRotAngle = 0
             NotifyPropertyChanged(NameOf(sRotAngle))
             Return
          End If
+         Dim vtMovedPart As Vector3d
+         if EgtGetInfo(Map.refTopPanelVM.SelPart.nPartId, "MovedPart", vtMovedPart) Then
+            Dim nEntId = EgtGetFirstInGroup( Map.refTopPanelVM.SelPart.nPrintSolidLayerId)
+            While nEntId <> GDB_ID.NULL
+               EgtMove(nEntId, -vtMovedPart, GDB_RT.GLOB)
+               nEntId = EgtGetNext( nEntId)
+            End While
+            EgtRemoveInfo(Map.refTopPanelVM.SelPart.nPartId, "MovedPart")
+         End If
          Dim b3PrintSolid As New BBox3d
          EgtGetBBoxGlob(Map.refTopPanelVM.SelPart.nPartId, GDB_BB.STANDARD, b3PrintSolid)
-         If EgtRotate(Map.refTopPanelVM.SelPart.nPartId, b3PrintSolid.Center, vtSelRotAxes, dNewAngle) Then
-            EgtDraw()
-            RefreshPos()
+         If EgtRotate(Map.refTopPanelVM.SelPart.nPartId, b3PrintSolid.Center, vtSelRotAxes, dNewAngle, GDB_RT.GLOB) Then
             m_sRotAngle = 0
+            Map.refReferencePanelVM.UpdateFramePosition()
+            RefreshPos()
+            EgtDraw()
             NotifyPropertyChanged(NameOf(sRotAngle))
+            ' Imposto flag di ricalcolo slice
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
          Else
             m_sRotAngle = value
          End If
-         Map.refReferencePanelVM.UpdateFramePosition()
       End Set
    End Property
 
@@ -178,7 +205,8 @@ Public Class DispositionPanelVM
    End Sub
 
    Friend Sub Init()
-
+      RotZ = True
+      NotifyPropertyChanged(NameOf(RotZ))
    End Sub
 
    Friend Sub RefreshPos()

Icarus/Icarus.vbproj

@@ -53,6 +53,28 @@
   <PropertyGroup>
     <ApplicationManifest>app.manifest</ApplicationManifest>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\x86\Debug\</OutputPath>
+    <DocumentationFile>Icarus.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\x86\Release\</OutputPath>
+    <DocumentationFile>Icarus.xml</DocumentationFile>
+    <Optimize>true</Optimize>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>pdbonly</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
   <ItemGroup>
     <Reference Include="EgtUILib, Version=2.4.7.1, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
@@ -123,6 +145,10 @@
       <DependentUpon>DispositionPanelV.xaml</DependentUpon>
     </Compile>
     <Compile Include="DispositionPanel\DispositionPanelVM.vb" />
+    <Compile Include="ImportExportMachiningPanel\ImportExportMachiningPanelV.xaml.vb">
+      <DependentUpon>ImportExportMachiningPanelV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="ImportExportMachiningPanel\ImportExportMachiningPanelVM.vb" />
     <Compile Include="InstrumentPanel\InstrumentPanelV.xaml.vb">
       <DependentUpon>InstrumentPanelV.xaml</DependentUpon>
     </Compile>
@@ -299,6 +325,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="ImportExportMachiningPanel\ImportExportMachiningPanelV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="InstrumentPanel\InstrumentPanelV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -631,6 +661,10 @@
   <ItemGroup>
     <Resource Include="Resources\TopPanel\Edit.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\MachiningDb\Export.png" />
+    <Resource Include="Resources\MachiningDb\Import.png" />
+  </ItemGroup>
   <ItemGroup>
     <Resource Include="Resources\SplashScreen\GoldSplashscreen.png" />
   </ItemGroup>
@@ -639,7 +673,9 @@
   </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
-    <PostBuildEvent>IF "$(PlatformName)"=="x64" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\Icarus\IcarusR64.exe
+    <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\Icarus\IcarusR32.exe
+IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Debug" copy $(TargetPath) c:\EgtProg\Icarus\IcarusD32.exe
+IF "$(PlatformName)"=="x64" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\Icarus\IcarusR64.exe
 IF "$(PlatformName)"=="x64" IF "$(ConfigurationName)" == "Debug" copy $(TargetPath) c:\EgtProg\Icarus\IcarusD64.exe</PostBuildEvent>
   </PropertyGroup>
 </Project>

Icarus/ImportExportMachiningPanel/ImportExportMachiningPanelV.xaml

@@ -0,0 +1,62 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="ImportExportMachiningPanelV"
+                            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                            xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                            Title="{Binding OkMsg}"
+                            Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+                            IsMinimizable="False" WindowStartupLocation="CenterOwner" ShowInTaskbar="False"
+                            Width="400" Height="500">
+
+   <Grid>
+      <Grid.RowDefinitions>
+         <RowDefinition Height="7*"/>
+         <RowDefinition Height="1*"/>
+      </Grid.RowDefinitions>
+
+      <ListBox ItemsSource="{Binding MachiningList}">
+         <ListBox.ItemTemplate>
+            <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningItem}">
+               <Grid Height="20">
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="Auto"/>
+                     <ColumnDefinition Width="1*"/>
+                     <ColumnDefinition Width="Auto"/>
+                  </Grid.ColumnDefinitions>
+
+                  <CheckBox Name="ActiveTxBx"
+                            Grid.Column="0"
+                            IsChecked="{Binding Active}"
+                            Height="15" 
+                            Width="15"
+                            Margin="0,0,5,0"
+                            VerticalContentAlignment="Center"
+                            Visibility="{Binding Path=DataContext.Active_Visibility,
+                                                 RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                  <TextBlock Grid.Column="1" 
+                             Text="{Binding sName}" 
+                             FontSize="15" 
+                             Margin="0,0,5,0" 
+                             VerticalAlignment="Center" />
+                  <Ellipse Grid.Column="2"
+                           Width="15"
+                           Height="15"
+                           Fill="DarkOrange"
+                           Visibility="{Binding Overwrite_Visibility}"/>
+
+               </Grid>
+            </DataTemplate>
+            
+         </ListBox.ItemTemplate>
+      </ListBox>
+
+      <Button Command="{Binding OkCommand}" 
+              Content="{Binding OkMsg}" 
+              IsEnabled="{Binding IsEnabledOkBtn, Mode=OneWay}"
+              Grid.Row="1"
+              Height="30" Width="100" 
+              Margin="10" />
+
+   </Grid>
+
+</EgtWPFLib5:EgtCustomWindow>

Icarus/ImportExportMachiningPanel/ImportExportMachiningPanelV.xaml.vb

@@ -0,0 +1,18 @@
+Public Class ImportExportMachiningPanelV
+
+   Private WithEvents m_ImportExportMachiningPanelVM As ImportExportMachiningPanelVM
+
+   Sub New(Owner As Window, ImportExportMachiningPanelVM As ImportExportMachiningPanelVM)
+      MyBase.New(Owner)
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportMachiningPanelVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportMachiningPanelVM = ImportExportMachiningPanelVM
+   End Sub
+
+   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_ImportExportMachiningPanelVM.m_CloseWindow
+      Me.DialogResult = bDialogResult
+   End Sub
+
+End Class

Icarus/ImportExportMachiningPanel/ImportExportMachiningPanelVM.vb

@@ -0,0 +1,441 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class ImportExportMachiningPanelVM
+   Inherits VMBase
+
+   ' Modalita' di apertura della finestra
+   Public Enum WindowModeEnum As Integer
+      IMPORT
+      EXPORT
+   End Enum
+
+   Private m_WindowMode As WindowModeEnum
+   Public ReadOnly Property WindowMode As WindowModeEnum
+      Get
+         Return m_WindowMode
+      End Get
+   End Property
+
+   ' Lista delle lavorazioni
+   Private m_MachiningList As New ObservableCollection(Of ImpExpMachiningItem)
+   Public Property MachiningList As ObservableCollection(Of ImpExpMachiningItem)
+      Get
+         Return m_MachiningList
+      End Get
+      Set(value As ObservableCollection(Of ImpExpMachiningItem))
+         m_MachiningList = value
+      End Set
+   End Property
+
+   ' Percorso del file da cui importare le lavorazioni
+   Private m_ImportFilePath As String
+   Public ReadOnly Property ImportFilePath As String
+      Get
+         Return m_ImportFilePath
+      End Get
+   End Property
+
+   ' Lista delle lavorazioni presenti nel file da cui importare
+   Private m_ImportFileMachiningNameList As String()
+   Public ReadOnly Property ImportFileMachiningNameList As String()
+      Get
+         Return m_ImportFileMachiningNameList
+      End Get
+   End Property
+
+   ' Lista delle lavorazioni importate con successo
+   Private m_vsImported As String()
+   Public ReadOnly Property vsImported As String()
+      Get
+         Return m_vsImported
+      End Get
+   End Property
+
+   Public ReadOnly Property IsEnabledOkBtn As Boolean
+      Get
+         For Each Machining In MachiningList
+            If Machining.Active Then Return True
+         Next
+         Return False
+      End Get
+   End Property
+
+   Friend Event m_CloseWindow(bDialogResult As Boolean)
+
+   ' Definizione comandi
+   Private m_cmdOk As ICommand
+
+#Region "MESSAGES"
+
+   Public ReadOnly Property OkMsg As String
+      Get
+         If WindowMode = WindowModeEnum.IMPORT Then
+            Return EgtMsg(31450)
+         Else
+            Return EgtMsg(31451)
+         End If
+      End Get
+   End Property
+
+#End Region    ' Messages
+
+#Region "CONSTRUCTOR"
+
+   ' export
+   Sub New()
+      m_WindowMode = WindowModeEnum.EXPORT
+      ' carico lista lavorazioni
+      MachiningList.Clear()
+      ' leggo ed aggiungo le altre
+      Dim nIndex As Integer = 1
+      Dim sGUID As String = ""
+      Dim sName As String = ""
+      Dim sMaterials As String = ""
+      While ReadMachiningParamString(nIndex, MAC_GUID, "", sGUID) > 0
+         Dim Guid As Guid = Guid.Empty
+         Guid.TryParse(sGUID, Guid)
+         ReadMachiningParamString(nIndex, MAC_NAME, "", sName)
+         MachiningList.Add(New ImpExpMachiningItem(nIndex, Guid, sName, False))
+         nIndex += 1
+      End While
+      ImpExpMachiningItem.m_delEnableOkBtn = AddressOf EnableOkBtn
+   End Sub
+
+   ' import
+   Sub New(sImportFilePath As String)
+      m_WindowMode = WindowModeEnum.IMPORT
+      m_ImportFilePath = sImportFilePath
+      ' carico lista lavorazioni
+      MachiningList.Clear()
+      ' leggo ed aggiungo le altre
+      Dim nIndex As Integer = 1
+      Dim sGUID As String = ""
+      Dim sName As String = ""
+      Dim sMaterials As String = ""
+      While ReadMachiningParamString(nIndex, MAC_GUID, "", sGUID, sImportFilePath) > 0
+         Dim Guid As Guid = Guid.Empty
+         Guid.TryParse(sGUID, Guid)
+         ReadMachiningParamString(nIndex, MAC_NAME, "", sName, sImportFilePath)
+         MachiningList.Add(New ImpExpMachiningItem(nIndex, Guid, sName, AlreadyExist(sName)))
+         nIndex += 1
+      End While
+      ImpExpMachiningItem.m_delEnableOkBtn = AddressOf EnableOkBtn
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "METHODS"
+
+   Private Sub EnableOkBtn()
+      NotifyPropertyChanged(NameOf(IsEnabledOkBtn))
+   End Sub
+
+   Private Function AlreadyExist(MachiningName As String) As Boolean
+      Return Map.refMachiningDbVM.MachiningList.Any(Function(x) x.sName = MachiningName)
+   End Function
+
+#End Region     ' METHODS
+
+#Region "COMMANDS"
+
+#Region "OkCommand"
+
+   ''' <summary>
+   ''' Returns a command that remove the current selected machining.
+   ''' </summary>
+   Public ReadOnly Property OkCommand() As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf ConfirmImpExpMachinings)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Manage the MachiningDb closing.  This method is invoked by the CloseMachiningDbCommand.
+   ''' </summary>
+   Public Sub ConfirmImpExpMachinings(param As Object)
+      Select Case WindowMode
+         Case WindowModeEnum.IMPORT
+            Dim OrigFilePath As String = CurrentMachine.sMachiningFilePath
+            Dim NewMachining As Machining = Nothing
+            For Each Machining In m_MachiningList
+               Dim nIndex As Integer = Map.refMachiningDbVM.MachiningList.Max(Function(x) x.nIndex) + 1
+               If Machining.Active Then
+                  CurrentMachine.SetMachiningFilePath(ImportFilePath)
+                  ' leggo lavorazione da file di import
+                  NewMachining = New Machining(Machining.nIndex)
+                  ' cambio guid, indice e verifico nome
+                  NewMachining.sGUID = Guid.NewGuid.ToString()
+                  NewMachining.SetIndex(nIndex)
+                  If Machining.AlreadyExist Then
+                     If Machining.ChangeName Then
+                        NewMachining.sName = Machining.sName
+                     End If
+                  End If
+                  Map.refMachiningDbVM.MachiningList.Add(NewMachining)
+                  ' ripristino path corretta del Db
+                  CurrentMachine.SetMachiningFilePath(OrigFilePath)
+                  ' salvo la lavorazione
+                  NewMachining.Save()
+               End If
+            Next
+            ' ripristino path corretta del Db
+            CurrentMachine.SetMachiningFilePath(OrigFilePath)
+            ' seleziono ultima importata
+            If Not IsNothing(NewMachining) Then
+               Map.refMachiningDbVM.SelMachining = NewMachining
+               Map.refMachiningDbVM.NotifyPropertyChanged(NameOf(Map.refMachiningDbVM.SelMachining))
+            End If
+         Case WindowModeEnum.EXPORT
+            ' recupero le lavorazioni checkate
+            Dim FinalNameList As New List(Of String)
+            For Each Machining In MachiningList
+               If Machining.Active Then
+                  FinalNameList.Add(Machining.sName)
+               End If
+            Next
+            If FinalNameList.Count() = 0 Then Return
+            Dim FinalNameArray = FinalNameList.ToArray()
+            ' chiedo il nome con cui salvare il file .data
+            Dim SaveFileDlg As New System.Windows.Forms.SaveFileDialog() With {
+               .Title = EgtMsg(31451) & " " & EgtMsg(31452),
+               .Filter = "File data (*.data)|*.data|Tutti i file (*.*)|*.*",
+               .FileName = String.Empty
+            }
+            If SaveFileDlg.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then Return
+            Dim sFilePath As String = String.Empty
+            sFilePath = SaveFileDlg.FileName
+            ' se esiste già lo elimino
+            If File.Exists(sFilePath) Then
+               Try
+                  File.Delete(sFilePath)
+               Catch ex As Exception
+               End Try
+            End If
+            ' creo nuovo file
+            If Not File.Exists(sFilePath) Then
+               Try
+                  File.WriteAllLines(sFilePath, {"; Commento per evitare BOM con UTF-8"})
+               Catch ex As Exception
+               End Try
+            End If
+            Dim ActiveMachiningList As List(Of Machining) = (From Machining In Map.refMachiningDbVM.MachiningList
+                                                             Select Machining
+                                                             Where m_MachiningList.Any(Function(x) x.sGUID.ToString() = Machining.sGUID AndAlso x.Active)).ToList()
+            ' salvo tutte le lavorazioni sul Db
+            For Index = 0 To ActiveMachiningList.Count - 1
+               ActiveMachiningList(Index).WriteParamsOnDb(Index + 1, sFilePath)
+            Next
+      End Select
+
+      ' Chiusura finestra
+      RaiseEvent m_CloseWindow(True)
+   End Sub
+
+#End Region    ' OkCommand
+
+#End Region    ' Commands
+
+End Class
+
+Public Class ImpExpMachiningItem
+   Inherits VMBase
+
+   Public Const IMPEXTNAME As String = "_imp"
+
+   ' Actions
+   Friend Shared m_delEnableOkBtn As Action
+
+   Private Shared m_Empty As New MachiningIndex(-1, Guid.Empty, "None")
+
+   Private m_nIndex As Integer
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_sGUID As Guid
+   Public ReadOnly Property sGUID As Guid
+      Get
+         Return m_sGUID
+      End Get
+   End Property
+
+   Private m_sOrigName As String
+   Private m_sName As String
+   Public ReadOnly Property sName As String
+      Get
+         Return m_sName
+      End Get
+   End Property
+
+   Private m_Active As Boolean
+   Public Property Active As Boolean
+      Get
+         Return m_Active
+      End Get
+      Set(value As Boolean)
+         ' se esiste gia' chiedo se sovrascriverla
+         If value Then
+            If m_AlreadyExist Then
+               Select Case System.Windows.MessageBox.Show(EgtMsg(31453), "", MessageBoxButton.YesNoCancel)
+                  Case MessageBoxResult.Yes
+                     m_ChangeName = False
+                     m_Active = True
+                  Case MessageBoxResult.No
+                     Dim bImpNameAlreadyInList = False
+                     Dim nImpNameIndex As Integer = 0
+                     If Map.refMachiningDbVM.MachiningList.Any(Function(x) x.sName = m_sOrigName & IMPEXTNAME) Then
+                        nImpNameIndex += 1
+                        While Map.refMachiningDbVM.MachiningList.Any(Function(x) x.sName = m_sOrigName & IMPEXTNAME & "_" & nImpNameIndex)
+                           nImpNameIndex += 1
+                        End While
+                     End If
+                     m_sName = m_sOrigName & IMPEXTNAME & If(nImpNameIndex > 0, "_" & nImpNameIndex, "")
+                     System.Windows.MessageBox.Show("Machining will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
+                     NotifyPropertyChanged(NameOf(sName))
+                     m_ChangeName = True
+                     m_Active = True
+                  Case Else
+                     m_Active = False
+               End Select
+               NotifyPropertyChanged(NameOf(Active))
+            Else
+               m_Active = True
+            End If
+         Else
+            m_ChangeName = False
+            m_Active = False
+            m_sName = m_sOrigName
+            NotifyPropertyChanged(NameOf(sName))
+         End If
+         NotifyPropertyChanged(NameOf(Overwrite_Visibility))
+         If Not IsNothing(m_delEnableOkBtn) Then m_delEnableOkBtn()
+      End Set
+   End Property
+
+   ' Parametro che indica se questo item da importare esiste gia'
+   Private m_AlreadyExist As Boolean
+   Friend ReadOnly Property AlreadyExist As Boolean
+      Get
+         Return m_AlreadyExist
+      End Get
+   End Property
+
+   Private m_Overwrite_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property Overwrite_Visibility As Visibility
+      Get
+         Return If(m_Active AndAlso m_AlreadyExist AndAlso Not m_ChangeName, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
+   ' Parametro che indica se cambiare il nome di un item che esiste gia' o sovrascriverlo
+   Private m_ChangeName As Boolean
+   Friend Property ChangeName As Boolean
+      Get
+         Return m_ChangeName
+      End Get
+      Set(value As Boolean)
+         m_ChangeName = value
+      End Set
+   End Property
+
+   Sub New(nIndex As Integer, GUID As Guid, sName As String, AlreadyExist As Boolean)
+      m_nIndex = nIndex
+      m_sGUID = GUID
+      m_sOrigName = sName
+      m_sName = sName
+      m_AlreadyExist = AlreadyExist
+      m_Active = False
+   End Sub
+
+   Friend Shared Function Empty() As MachiningIndex
+      Return m_Empty
+   End Function
+
+End Class
+
+Public Class MachiningItem
+   Inherits VMBase
+
+   ' Actions
+   Friend Shared m_delEnableOkBtn As Action
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         If m_ChangeName Then
+            Return m_Name & "_imp"
+         Else
+            Return m_Name
+         End If
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_Active As Boolean
+   Public Property Active As Boolean
+      Get
+         Return m_Active
+      End Get
+      Set(value As Boolean)
+         ' se esiste gia' chiedo se sovrascriverla
+         If value Then
+            If m_AlreadyExist Then
+               Select Case System.Windows.MessageBox.Show(EgtMsg(31453), "", MessageBoxButton.YesNoCancel)
+                  Case MessageBoxResult.Yes
+                     m_ChangeName = False
+                     m_Active = True
+                  Case MessageBoxResult.No
+                     System.Windows.MessageBox.Show(EgtMsg(31454), "", MessageBoxButton.OK)
+                     m_ChangeName = True
+                     m_Active = True
+                  Case Else
+                     m_Active = False
+               End Select
+               NotifyPropertyChanged("Active")
+            Else
+               m_Active = True
+            End If
+         Else
+            m_ChangeName = False
+            m_Active = False
+         End If
+         If Not IsNothing(m_delEnableOkBtn) Then m_delEnableOkBtn()
+      End Set
+   End Property
+
+   ' Parametro che indica se questo item da importare esiste gia'
+   Private m_AlreadyExist As Boolean
+   Friend ReadOnly Property AlreadyExist As Boolean
+      Get
+         Return m_AlreadyExist
+      End Get
+   End Property
+
+   ' Parametro che indica se cambiare il nome di un item che esiste gia' o sovrascriverlo
+   Private m_ChangeName As Boolean
+   Friend Property ChangeName As Boolean
+      Get
+         Return m_ChangeName
+      End Get
+      Set(value As Boolean)
+         m_ChangeName = value
+         NotifyPropertyChanged("Name")
+      End Set
+   End Property
+
+   Sub New(Name As String, AlreadyExist As Boolean)
+      m_Name = Name
+      m_AlreadyExist = AlreadyExist
+   End Sub
+
+End Class

Icarus/MachiningDb/Machining.vb

@@ -9,7 +9,8 @@ Public Class Machining
    Public Enum MPAR_SLICINGTYPE As Integer
       VERTICAL = 1
       DEG45 = 2
-      HORIZONTAL = 3
+      DEG45_Y = 3
+      HORIZONTAL = 4
    End Enum
 
    Public Enum MPAR_STRANDORDERS As Integer
@@ -70,6 +71,9 @@ Public Class Machining
          Return m_nIndex
       End Get
    End Property
+   Friend Sub SetIndex(nValue As Integer)
+      m_nIndex = nValue
+   End Sub
 
    Protected m_sGUID As String = ""
    Public Property sGUID As String
@@ -184,11 +188,11 @@ Public Class Machining
       Next
    End Sub
 
-   Friend Sub WriteParamsOnDb(nIndex As Integer)
-      WriteMachiningParam(nIndex, MAC_GUID, m_sGUID)
-      WriteMachiningParam(nIndex, MAC_NAME, m_sName)
+   Friend Sub WriteParamsOnDb(nIndex As Integer, Optional sFilePath As String = "")
+      WriteMachiningParam(nIndex, MAC_GUID, m_sGUID, sFilePath)
+      WriteMachiningParam(nIndex, MAC_NAME, m_sName, sFilePath)
       For Each Cathegory In m_CathegoryList
-         Cathegory.WriteParamOnDb(nIndex)
+         Cathegory.WriteParamOnDb(nIndex, sFilePath)
       Next
    End Sub
 
@@ -303,6 +307,7 @@ Public Class MachiningCathegory
                                                                 New ComboMachiningParam(MachiningParam.Params.DIRECTION, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEED, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.G0FEEDZ, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.TOOLDIAM, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.FLOWRATE_PC, nIndex)})
          Case Cathegories.LINK
@@ -378,12 +383,12 @@ Public Class MachiningCathegory
       Next
    End Sub
 
-   Friend Sub WriteParamOnDb(nIndex As Integer)
+   Friend Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       If Type = Cathegories.MATERIALS Then
-         WriteMachiningParamSplit(nIndex, MAC_MATERIALS, "")
+         WriteMachiningParamSplit(nIndex, MAC_MATERIALS, "", sFilePath)
       End If
       For Each Param In m_MachiningParamList
-         Param.WriteParamOnDb(nIndex)
+         Param.WriteParamOnDb(nIndex, sFilePath)
       Next
    End Sub
 
@@ -418,37 +423,38 @@ Public MustInherit Class MachiningParam
       WIPEFEED_PC = 24
       FLOORCOUNT = 25
       G0FEED = 26
-      TOOLDIAM = 27
-      RIBSTYPE = 28
-      RIBSOVERLAP = 29
-      RIBSSTRANDCOUNT = 30
-      RIBSLINK = 31
-      RIBSINVERTORDER = 32
-      RIBSINVERTDIRECTION = 33
-      RIBSLEADININVERT = 34
-      RIBSLEADINLEN = 35
-      RIBSLEADOUTINVERT = 36
-      RIBSLEADOUTLEN = 37
-      RIBSLEADOUTCOASTING = 38
-      RIBSLEADOUTWIPE = 39
-      RIBSLEADOUTWIPEDIR = 40
-      SHELLNBRDIFFERENCE = 41
-      SHELLNBRCOASTING = 42
-      SHELLNBRWIPE = 43
-      SHELLNBRWIPEDIR = 44
-      AUXSOLIDSOVERLAP = 45
-      AUXSOLIDSINFILL = 46
-      AUXSOLIDSSTRANDORDER = 47
-      AUXSOLIDSLINKTYPE = 48
-      AUXSOLIDSLINKPARAM = 49
-      AUXSOLIDSSTARTPOINTOFFSETONSLICE = 50
-      AUXSOLIDSCOASTINGLEN = 51
-      AUXSOLIDSWIPELEN = 52
-      AUXSOLIDSWIPEDIR = 53
-      SPIRALVASE = 54
-      WIPEDIR = 55
-      STRANDOVERLAP = 56
-      FLOWRATE_PC = 57
+      G0FEEDZ = 27
+      TOOLDIAM = 28
+      RIBSTYPE = 29
+      RIBSOVERLAP = 30
+      RIBSSTRANDCOUNT = 31
+      RIBSLINK = 32
+      RIBSINVERTORDER = 33
+      RIBSINVERTDIRECTION = 34
+      RIBSLEADININVERT = 35
+      RIBSLEADINLEN = 36
+      RIBSLEADOUTINVERT = 37
+      RIBSLEADOUTLEN = 38
+      RIBSLEADOUTCOASTING = 39
+      RIBSLEADOUTWIPE = 40
+      RIBSLEADOUTWIPEDIR = 41
+      SHELLNBRDIFFERENCE = 42
+      SHELLNBRCOASTING = 43
+      SHELLNBRWIPE = 44
+      SHELLNBRWIPEDIR = 45
+      AUXSOLIDSOVERLAP = 46
+      AUXSOLIDSINFILL = 47
+      AUXSOLIDSSTRANDORDER = 48
+      AUXSOLIDSLINKTYPE = 49
+      AUXSOLIDSLINKPARAM = 50
+      AUXSOLIDSSTARTPOINTOFFSETONSLICE = 51
+      AUXSOLIDSCOASTINGLEN = 52
+      AUXSOLIDSWIPELEN = 53
+      AUXSOLIDSWIPEDIR = 54
+      SPIRALVASE = 55
+      WIPEDIR = 56
+      STRANDOVERLAP = 57
+      FLOWRATE_PC = 58
       MATERIALS = 100
    End Enum
 
@@ -519,6 +525,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Floor Count"
          Case Params.G0FEED
             m_sName = "G0 Feed"
+         Case Params.G0FEEDZ
+            m_sName = "G0 Feed Z"
          Case Params.TOOLDIAM
             m_sName = "Nozzle Diameter"
          Case Params.RIBSTYPE
@@ -589,7 +597,7 @@ Public MustInherit Class MachiningParam
       m_sName = sName
    End Sub
 
-   Friend MustOverride Sub WriteParamOnDb(nIndex As Integer)
+   Friend MustOverride Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
    Friend Overridable Sub WriteParamInPart(nIndex As Integer)
    End Sub
    Friend MustOverride Sub SaveParam()
@@ -610,15 +618,16 @@ Public Class NumericMachiningParam
    End Property
    Public Overridable Property sValue As String
       Get
-         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString( m_dValue, 2))
+         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString(m_dValue, 2))
       End Get
       Set(value As String)
          If m_bIsLen Then
             StringToLen(value, m_dValue)
          Else
-            StringToDouble( value, m_dValue)
+            StringToDouble(value, m_dValue)
          End If
          NotifyPropertyChanged(NameOf(sValue))
+         Map.refMachiningDbVM.NotifyPropertyChanged(NameOf(Map.refMachiningDbVM.ImpExp_IsEnabled))
       End Set
    End Property
 
@@ -706,6 +715,9 @@ Public Class NumericMachiningParam
             Case Params.G0FEED
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_G0FEED, 0)
                m_bIsLen = True
+            Case Params.G0FEEDZ
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_G0FEEDZ, 0)
+               m_bIsLen = True
             Case Params.TOOLDIAM
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_TOOLDIAM, 0)
                m_bIsLen = True
@@ -768,7 +780,7 @@ Public Class NumericMachiningParam
       m_dOrigValue = m_dValue
    End Sub
 
-   Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
+   Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Dim sWriteValue As String = ""
       If m_bIsLen Then
          sWriteValue = LenToString(m_dValue, 2)
@@ -777,83 +789,85 @@ Public Class NumericMachiningParam
       End If
       Select Case Type
          Case Params.STRANDH
-            WriteMachiningParam(nIndex, MAC_STRANDH, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_STRANDH, sWriteValue, sFilePath)
          Case Params.STRANDW
-            WriteMachiningParam(nIndex, MAC_STRANDW, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_STRANDW, sWriteValue, sFilePath)
          Case Params.STRANDCOUNT
-            WriteMachiningParam(nIndex, MAC_STRANDCOUNT, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_STRANDCOUNT, sWriteValue, sFilePath)
          Case Params.OFFSET
-            WriteMachiningParam(nIndex, MAC_OFFSET, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_OFFSET, sWriteValue, sFilePath)
          Case Params.STRANDOVERLAP
-            WriteMachiningParam(nIndex, MAC_STRANDOVERLAP, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_STRANDOVERLAP, sWriteValue, sFilePath)
          Case Params.STARTPOINTOFFSETONSLICE
-            WriteMachiningParam(nIndex, MAC_STARTPOINTOFFSETONSLICE, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_STARTPOINTOFFSETONSLICE, sWriteValue, sFilePath)
          Case Params.LINKPARAM
-            WriteMachiningParam(nIndex, MAC_LINKPARAM, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_LINKPARAM, sWriteValue, sFilePath)
          Case Params.LINKZUP
-            WriteMachiningParam(nIndex, MAC_LINKZUP, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_LINKZUP, sWriteValue, sFilePath)
          Case Params.OFFSETLEADPOINT
-            WriteMachiningParam(nIndex, MAC_OFFSETLEADPOINT, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_OFFSETLEADPOINT, sWriteValue, sFilePath)
          Case Params.LEADINTANGDIST
-            WriteMachiningParam(nIndex, MAC_LEADINTANGDIST, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_LEADINTANGDIST, sWriteValue, sFilePath)
          Case Params.LEADINORTHODIST
-            WriteMachiningParam(nIndex, MAC_LEADINORTHODIST, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_LEADINORTHODIST, sWriteValue, sFilePath)
          Case Params.LEADOUTTANGDIST
-            WriteMachiningParam(nIndex, MAC_LEADOUTTANGDIST, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_LEADOUTTANGDIST, sWriteValue, sFilePath)
          Case Params.LEADOUTORTHODIST
-            WriteMachiningParam(nIndex, MAC_LEADOUTORTHODIST, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_LEADOUTORTHODIST, sWriteValue, sFilePath)
          Case Params.COASTINGLEN
-            WriteMachiningParam(nIndex, MAC_COASTINGLEN, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_COASTINGLEN, sWriteValue, sFilePath)
          Case Params.COASTINGFEED_PC
-            WriteMachiningParam(nIndex, MAC_COASTINGFEEDPU, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_COASTINGFEEDPU, sWriteValue, sFilePath)
          Case Params.WIPELEN
-            WriteMachiningParam(nIndex, MAC_WIPELEN, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_WIPELEN, sWriteValue, sFilePath)
          Case Params.WIPEFEED_PC
-            WriteMachiningParam(nIndex, MAC_WIPEFEEDPU, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_WIPEFEEDPU, sWriteValue, sFilePath)
          Case Params.WIPEDIR
-            WriteMachiningParam(nIndex, MAC_WIPEDIR, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_WIPEDIR, sWriteValue, sFilePath)
          Case Params.FLOORCOUNT
-            WriteMachiningParam(nIndex, MAC_FLOORCOUNT, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_FLOORCOUNT, sWriteValue, sFilePath)
          Case Params.G0FEED
-            WriteMachiningParam(nIndex, MAC_G0FEED, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_G0FEED, sWriteValue, sFilePath)
+         Case Params.G0FEEDZ
+            WriteMachiningParam(nIndex, MAC_G0FEEDZ, sWriteValue, sFilePath)
          Case Params.TOOLDIAM
-            WriteMachiningParam(nIndex, MAC_TOOLDIAM, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_TOOLDIAM, sWriteValue, sFilePath)
          Case Params.RIBSOVERLAP
-            WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue, sFilePath)
          Case Params.RIBSSTRANDCOUNT
-            WriteMachiningParam(nIndex, MAC_RIBSSTRANDCOUNT, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSSTRANDCOUNT, sWriteValue, sFilePath)
          Case Params.RIBSLEADINLEN
-            WriteMachiningParam(nIndex, MAC_RIBSLEADINLEN, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSLEADINLEN, sWriteValue, sFilePath)
          Case Params.RIBSLEADOUTLEN
-            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTLEN, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTLEN, sWriteValue, sFilePath)
          Case Params.RIBSLEADOUTCOASTING
-            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTCOASTING, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTCOASTING, sWriteValue, sFilePath)
          Case Params.RIBSLEADOUTWIPE
-            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTWIPE, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTWIPE, sWriteValue, sFilePath)
          Case Params.RIBSLEADOUTWIPEDIR
-            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTWIPEDIR, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTWIPEDIR, sWriteValue, sFilePath)
          Case Params.SHELLNBRDIFFERENCE
-            WriteMachiningParam(nIndex, MAC_SHELLNBRDIFFERENCE, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_SHELLNBRDIFFERENCE, sWriteValue, sFilePath)
          Case Params.SHELLNBRCOASTING
-            WriteMachiningParam(nIndex, MAC_SHELLNBRCOASTING, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_SHELLNBRCOASTING, sWriteValue, sFilePath)
          Case Params.SHELLNBRWIPE
-            WriteMachiningParam(nIndex, MAC_SHELLNBRWIPE, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_SHELLNBRWIPE, sWriteValue, sFilePath)
          Case Params.SHELLNBRWIPEDIR
-            WriteMachiningParam(nIndex, MAC_SHELLNBRWIPEDIR, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_SHELLNBRWIPEDIR, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSOVERLAP
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOVERLAP, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOVERLAP, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSLINKPARAM
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKPARAM, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKPARAM, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSCOASTINGLEN
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSWIPELEN
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPELEN, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPELEN, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSWIPEDIR
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue, sFilePath)
          Case Params.FLOWRATE_PC
-            WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue)
+            WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue, sFilePath)
       End Select
    End Sub
 
@@ -879,6 +893,7 @@ Public Class StringMachiningParam
       Set(value As String)
          m_sValue = value
          NotifyPropertyChanged(NameOf(sValue))
+         Map.refMachiningDbVM.NotifyPropertyChanged(NameOf(Map.refMachiningDbVM.ImpExp_IsEnabled))
       End Set
    End Property
 
@@ -901,10 +916,10 @@ Public Class StringMachiningParam
       m_sOrigValue = m_sValue
    End Sub
 
-   Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
+   Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Select Case Type
          Case Params.STRANDH
-            'WritePrivateProfileString(nIndex, MAC_STRANDH, sWriteValue)
+            'WritePrivateProfileString(nIndex, MAC_STRANDH, sWriteValue, sFilePath)
       End Select
    End Sub
 
@@ -937,6 +952,7 @@ Public Class ComboMachiningParam
       Set(value As IdNameStruct)
          m_SelValue = value
          NotifyPropertyChanged(NameOf(SelValue))
+         Map.refMachiningDbVM.NotifyPropertyChanged(NameOf(Map.refMachiningDbVM.ImpExp_IsEnabled))
       End Set
    End Property
 
@@ -965,11 +981,16 @@ Public Class ComboMachiningParam
       Else
          Select Case Type
             Case Params.SLICINGTYPE
-               Dim nHorizontalPrint As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_HORIZONTAL_PRINT, 0, CurrentMachine.sMachIniFile)
-               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical"),
-                                                        New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°")})
-               If nHorizontalPrint > 0 Then
-                  m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
+               Dim nSlicingType As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_SLICINGTYPE, 0, CurrentMachine.sMachIniFile)
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical")})
+               If nSlicingType >= 1 Then
+                  m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45deg X"))
+                  If nSlicingType >= 2 Then
+                     m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45_Y, "45deg Y"))
+                     If nSlicingType >= 3 Then
+                        m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
+                     End If
+                  End If
                End If
                Dim nSelValue As Double = ReadMachiningParamDouble(nIndex, MAC_SLICINGTYPE, -1)
                If nSelValue = -1 Then
@@ -1025,28 +1046,28 @@ Public Class ComboMachiningParam
       m_OrigSelValue = m_SelValue
    End Sub
 
-   Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
+   Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Select Case Type
          Case Params.SLICINGTYPE
-            WriteMachiningParam(nIndex, MAC_SLICINGTYPE, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_SLICINGTYPE, m_SelValue.Id, sFilePath)
          Case Params.STRANDORDER
-            WriteMachiningParam(nIndex, MAC_STRANDORDER, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_STRANDORDER, m_SelValue.Id, sFilePath)
          Case Params.DIRECTION
-            WriteMachiningParam(nIndex, MAC_DIRECTION, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_DIRECTION, m_SelValue.Id, sFilePath)
          Case Params.LINKTYPE
-            WriteMachiningParam(nIndex, MAC_LINKTYPE, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_LINKTYPE, m_SelValue.Id, sFilePath)
          Case Params.LEADIN
-            WriteMachiningParam(nIndex, MAC_LEADIN, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_LEADIN, m_SelValue.Id, sFilePath)
          Case Params.LEADOUT
-            WriteMachiningParam(nIndex, MAC_LEADOUT, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_LEADOUT, m_SelValue.Id, sFilePath)
          Case Params.RIBSTYPE
-            WriteMachiningParam(nIndex, MAC_RIBSTYPE, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_RIBSTYPE, m_SelValue.Id, sFilePath)
          Case Params.AUXSOLIDSINFILL
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILL, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILL, m_SelValue.Id, sFilePath)
          Case Params.AUXSOLIDSSTRANDORDER
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDORDER, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDORDER, m_SelValue.Id, sFilePath)
          Case Params.AUXSOLIDSLINKTYPE
-            WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id, sFilePath)
       End Select
    End Sub
 
@@ -1072,6 +1093,7 @@ Public Class CheckMachiningParam
       Set(value As Boolean)
          m_bValue = value
          NotifyPropertyChanged(NameOf(bValue))
+         Map.refMachiningDbVM.NotifyPropertyChanged(NameOf(Map.refMachiningDbVM.ImpExp_IsEnabled))
       End Set
    End Property
 
@@ -1115,20 +1137,20 @@ Public Class CheckMachiningParam
       m_bOrigValue = m_bValue
    End Sub
 
-   Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
+   Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Select Case Type
          Case Params.SPIRALVASE
-            WriteMachiningParam(nIndex, MAC_SPIRALVASE, If(m_bValue, 1, 0))
+            WriteMachiningParam(nIndex, MAC_SPIRALVASE, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLINK
-            WriteMachiningParam(nIndex, MAC_RIBSLINK, If(m_bValue, 1, 0))
+            WriteMachiningParam(nIndex, MAC_RIBSLINK, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSINVERTORDER
-            WriteMachiningParam(nIndex, MAC_RIBSINVERTORDER, If(m_bValue, 1, 0))
+            WriteMachiningParam(nIndex, MAC_RIBSINVERTORDER, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSINVERTDIRECTION
-            WriteMachiningParam(nIndex, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0))
+            WriteMachiningParam(nIndex, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLEADININVERT
-            WriteMachiningParam(nIndex, MAC_RIBSLEADININVERT, If(m_bValue, 1, 0))
+            WriteMachiningParam(nIndex, MAC_RIBSLEADININVERT, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLEADOUTINVERT
-            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
+            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0), sFilePath)
       End Select
    End Sub
 
@@ -1164,6 +1186,7 @@ Public Class MaterialMachiningParam
       Set(value As Boolean)
          m_bValue = value
          NotifyPropertyChanged(NameOf(bValue))
+         Map.refMachiningDbVM.NotifyPropertyChanged(NameOf(Map.refMachiningDbVM.ImpExp_IsEnabled))
       End Set
    End Property
 
@@ -1187,9 +1210,9 @@ Public Class MaterialMachiningParam
       m_bOrigValue = m_bValue
    End Sub
 
-   Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
+   Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Dim sMaterials As String = ""
-      ReadMachiningParamSplit(nIndex, MAC_MATERIALS, "", sMaterials)
+      ReadMachiningParamSplit(nIndex, MAC_MATERIALS, "", sMaterials, sFilePath)
       Dim MaterialGuidList As New List(Of String)
       If Not String.IsNullOrWhiteSpace(sMaterials) Then
          MaterialGuidList = sMaterials.Split(";"c).ToList()
@@ -1203,7 +1226,7 @@ Public Class MaterialMachiningParam
       For Index = 0 To MaterialGuidList.Count - 1
          sMaterials &= MaterialGuidList(Index) & If(Index < MaterialGuidList.Count - 1, ";"c, "")
       Next
-      WriteMachiningParamSplit(nIndex, MAC_MATERIALS, sMaterials)
+      WriteMachiningParamSplit(nIndex, MAC_MATERIALS, sMaterials, sFilePath)
    End Sub
 
    Friend Overrides Sub SaveParam()

Icarus/MachiningDb/MachiningDbV.xaml

@@ -14,20 +14,43 @@
             <RowDefinition Height="1*"/>
             <RowDefinition Height="Auto"/>
          </Grid.RowDefinitions>
-         <UniformGrid Rows="1">
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
+            </Grid.ColumnDefinitions>
             <Button Content="New"
                     Command="{Binding New_Command}"
                     IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
             <Button Content="Save"
+                    Grid.Column="1"
                     Command="{Binding Save_Command}"
                     IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
             <Button Content="Delete"
+                    Grid.Column="2"
                     Command="{Binding Delete_Command}"
                     IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
-         </UniformGrid>
+            <Button Grid.Column="3"
+                    Command="{Binding Import_Command}"
+                    ToolTip="{Binding ImportToolTip}"
+                    IsEnabled="{Binding ImpExp_IsEnabled}"
+                    Style="{StaticResource ToolBar_Button}">
+               <Image Source="/Resources/MachiningDB/Import.png" Stretch="Uniform"/>
+            </Button>
+            <Button Grid.Column="4"
+                    Command="{Binding Export_Command}"
+                    ToolTip="{Binding ImportToolTip}"
+                    IsEnabled="{Binding ImpExp_IsEnabled}"
+                    Style="{StaticResource ToolBar_Button}">
+               <Image Source="/Resources/MachiningDB/Export.png" Stretch="Uniform"/>
+            </Button>
+         </Grid>
          <Grid Grid.Row="1">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>

Icarus/MachiningDb/MachiningDbVM.vb

@@ -26,7 +26,7 @@ Public Class MachiningDbVM
             ' verifico se modificato
             If m_SelMachining.bIsModified Then
                ' chiedo se salvare
-               Select Case MessageBox.Show("Salvare le modifiche apportate alla lavorazione selezionata?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
+               Select Case MessageBox.Show("Do you want to save the modification done on the selected machining?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
                   Case MessageBoxResult.Yes
                      m_SelMachining.Save()
                   Case MessageBoxResult.No
@@ -50,6 +50,7 @@ Public Class MachiningDbVM
                End If
             Next
          End If
+         NotifyPropertyChanged(NameOf(ImpExp_IsEnabled))
       End Set
    End Property
 
@@ -105,12 +106,20 @@ Public Class MachiningDbVM
       NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
    End Sub
 
+   Public ReadOnly Property ImpExp_IsEnabled As Boolean
+      Get
+         Return m_IsEnabled AndAlso (IsNothing(m_SelMachining) OrElse Not m_SelMachining.bIsModified)
+      End Get
+   End Property
+
    ' Definizione comandi
    Private m_cmdOk As ICommand
    Private m_cmdNew As ICommand
    Private m_cmdSave As ICommand
    Private m_cmdDelete As ICommand
    Private m_cmdEditName As ICommand
+   Private m_cmdImport As ICommand
+   Private m_cmdExport As ICommand
 
 #End Region    ' FIELDS & PROPERTIES
 
@@ -138,6 +147,7 @@ Public Class MachiningDbVM
       GetMainPrivateProfileString(S_PRINTING3D, K_CURRMACHINING, "", sCurrMachining)
       m_SelMachining = MachiningList.FirstOrDefault(Function(x) x.sGUID = sCurrMachining)
       NotifyPropertyChanged(NameOf(SelMachining))
+      NotifyPropertyChanged(NameOf(ImpExp_IsEnabled))
    End Sub
 
    Friend Sub SetNameVisibility(bValue As Boolean)
@@ -213,7 +223,7 @@ Public Class MachiningDbVM
          ' aggiorno combo top
          Dim CurrSelTopMachining As MachiningIndex = Map.refTopPanelVM.SelMachining
          Map.refTopPanelVM.InitMachiningsList()
-         Map.refTopPanelVM.SetSelMachining( CurrSelTopMachining)
+         Map.refTopPanelVM.SetSelMachining(CurrSelTopMachining)
       End If
       ' ripristino modalita' standard
       Map.refTopPanelVM.SelPage = Pages.MODIFY
@@ -239,6 +249,7 @@ Public Class MachiningDbVM
       m_SelMachining = NewMachining
       NotifyPropertyChanged(NameOf(SelMachining))
       SetNameVisibility(True)
+      SetIsModified(True)
    End Sub
 
 #End Region    ' New
@@ -255,8 +266,9 @@ Public Class MachiningDbVM
    End Property
 
    Public Sub Save()
-      If IsNothing( m_SelMachining) Then Return
+      If IsNothing(m_SelMachining) Then Return
       m_SelMachining.Save()
+      NotifyPropertyChanged(NameOf(ImpExp_IsEnabled))
    End Sub
 
 #End Region    ' Save
@@ -275,7 +287,7 @@ Public Class MachiningDbVM
    Public Sub Delete()
       If IsNothing(m_SelMachining) Then Return
       ' chiedo conferma
-      Select Case MessageBox.Show("Sei sicuro di voler cancellare la lavorazione selezionata?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
+      Select Case MessageBox.Show("Are you sure you want to delete the selected machining?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
          Case MessageBoxResult.Yes
             m_MachiningList.Remove(m_SelMachining)
             SetIsModified(True)
@@ -305,6 +317,49 @@ Public Class MachiningDbVM
 
 #End Region    ' EditName
 
+#Region "Import"
+
+   Public ReadOnly Property Import_Command As ICommand
+      Get
+         If m_cmdImport Is Nothing Then
+            m_cmdImport = New Command(AddressOf Import)
+         End If
+         Return m_cmdImport
+      End Get
+   End Property
+
+   Public Sub Import()
+      ' chiedo il nome del file .data da aprire
+      Dim OpenFileDlg As New System.Windows.Forms.OpenFileDialog() With {
+               .Title = EgtMsg(31451) & " " & EgtMsg(31452),
+               .Filter = "File data (*.data)|*.data|Tutti i file (*.*)|*.*",
+               .FileName = String.Empty
+            }
+      If OpenFileDlg.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then Return
+      Dim ImportWindow As New ImportExportMachiningPanelV(Application.Current.MainWindow, New ImportExportMachiningPanelVM(OpenFileDlg.FileName))
+      ImportWindow.ShowDialog()
+   End Sub
+
+#End Region    ' Import
+
+#Region "Export"
+
+   Public ReadOnly Property Export_Command As ICommand
+      Get
+         If m_cmdExport Is Nothing Then
+            m_cmdExport = New Command(AddressOf Export)
+         End If
+         Return m_cmdExport
+      End Get
+   End Property
+
+   Public Sub Export()
+      Dim ExportWindow As New ImportExportMachiningPanelV(Application.Current.MainWindow, New ImportExportMachiningPanelVM)
+      ExportWindow.ShowDialog()
+   End Sub
+
+#End Region    ' Export
+
 #End Region    ' COMMANDS
 
 End Class

Icarus/MainWindow/MainWindowM.vb

@@ -195,8 +195,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2410, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2410, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2412, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2412, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

Icarus/ManagePartPanel/ManagePartPanelVM.vb

@@ -310,13 +310,14 @@ Public Class ManagePartPanelVM
                         Case ManagePart_Layer.LayerType.PRINT_SOLID
                            nPrintPartLayerId = EgtCreateGroup(nPartId)
                            EgtSetName(nPrintPartLayerId, PRINT_SOLID)
+                           EgtSetColor(nPrintPartLayerId, GeomEntityColors.c3Print)
                            If ManagePart_Layer.EntityList.Count > 0 Then
                               PrintSolidEntity = ManagePart_Layer.EntityList(0)
                               EgtRelocateGlob(PrintSolidEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
                               ' calcolo box superficie per creazione riferimento
                               EgtGetBBoxGlob(PrintSolidEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
-                              ' coloro l'entita'
-                              EgtSetColor(PrintSolidEntity.nId, GeomEntityColors.c3Print)
+                              ' elimino colore entita'
+                              EgtResetColor(PrintSolidEntity.nId)
                               If PrintSolidEntity.sName <> PrintSolidEntity.nId.ToString() Then
                                  EgtSetInfo(PrintSolidEntity.nId, ENTITY_NAME, PrintSolidEntity.sName)
                               End If
@@ -324,6 +325,7 @@ Public Class ManagePartPanelVM
                         Case ManagePart_Layer.LayerType.MACH_START
                            nMachStartLayerId = EgtCreateGroup(nPartId)
                            EgtSetName(nMachStartLayerId, LAY_MACH_START)
+                           EgtSetColor(nMachStartLayerId, GeomEntityColors.c3MachStart)
                            Dim nMachStartId As Integer = GDB_ID.NULL
                            If ManagePart_Layer.EntityList.Count > 0 Then
                               For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
@@ -339,8 +341,8 @@ Public Class ManagePartPanelVM
                                        nMachStartId = EgtCreateCurveCompo(nMachStartLayerId, PartManager_GeomEntity.nId, True)
                                  End Select
                                  EgtSetName(nMachStartId, START_GEOM)
-                                 ' coloro l'entita'
-                                 EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+                                 ' elimino colore entita'
+                                 EgtResetColor(nMachStartId)
                                  If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                     EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                                  End If
@@ -350,17 +352,18 @@ Public Class ManagePartPanelVM
                               Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
                               nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
                               EgtSetName(nMachStartId, START_GEOM)
-                              ' coloro l'entita' di rosso
-                              EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+                              ' elimino colore entita'
+                              EgtResetColor(nMachStartId)
                            End If
                         Case ManagePart_Layer.LayerType.RIBS
                            nRibsLayerId = EgtCreateGroup(nPartId)
                            EgtSetName(nRibsLayerId, LAY_RIBS)
+                           EgtSetColor(nRibsLayerId, GeomEntityColors.c3Rib)
                            For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                               EgtSetInfo(PartManager_GeomEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
                               EgtRelocateGlob(PartManager_GeomEntity.nId, nRibsLayerId, GDB_POS.LAST_SON)
-                              ' coloro l'entita'
-                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Rib)
+                              ' elimino colore entita'
+                              EgtResetColor(PartManager_GeomEntity.nId)
                               If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                  EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                               End If
@@ -368,11 +371,12 @@ Public Class ManagePartPanelVM
                         Case ManagePart_Layer.LayerType.SHELL_NUMBER
                            nShellNumberLayerId = EgtCreateGroup(nPartId)
                            EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
+                           EgtSetColor(nShellNumberLayerId, GeomEntityColors.c3ShellNumber)
                            For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                               EgtSetInfo(PartManager_GeomEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
                               EgtRelocateGlob(PartManager_GeomEntity.nId, nShellNumberLayerId, GDB_POS.LAST_SON)
-                              ' coloro l'entita'
-                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3ShellNumber)
+                              ' elimino colore entita'
+                              EgtResetColor(PartManager_GeomEntity.nId)
                               If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                  EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                               End If
@@ -380,11 +384,12 @@ Public Class ManagePartPanelVM
                         Case ManagePart_Layer.LayerType.AUX_SOLIDS
                            nAuxSolidsLayerId = EgtCreateGroup(nPartId)
                            EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
+                           EgtSetColor(nAuxSolidsLayerId, GeomEntityColors.c3AuxSolids)
                            For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                               EgtSetInfo(PartManager_GeomEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
                               EgtRelocateGlob(PartManager_GeomEntity.nId, nAuxSolidsLayerId, GDB_POS.LAST_SON)
-                              ' coloro l'entita'
-                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3AuxSolids)
+                              ' elimino colore entita'
+                              EgtResetColor(PartManager_GeomEntity.nId)
                               If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                  EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                               End If
@@ -392,10 +397,11 @@ Public Class ManagePartPanelVM
                         Case ManagePart_Layer.LayerType.OTHERS
                            nOthersLayerId = EgtCreateGroup(nPartId)
                            EgtSetName(nOthersLayerId, LAY_OTHERS)
+                           EgtSetColor(nOthersLayerId, GeomEntityColors.c3Others)
                            For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
                               EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
-                              ' coloro l'entita'
-                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Others)
+                              ' elimino colore entita'
+                              EgtResetColor(PartManager_GeomEntity.nId)
                               If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                  EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                               End If
@@ -408,16 +414,16 @@ Public Class ManagePartPanelVM
                                     Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
                                        '  la trasformo in curva compo
                                        Dim nOtherId As Integer = EgtCreateCurveCompo(nOthersLayerId, PartManager_GeomEntity.nId, True)
-                                       ' coloro l'entita'
-                                       EgtSetColor(nOtherId, GeomEntityColors.c3Others)
+                                       ' elimino colore entita'
+                                       EgtResetColor(PartManager_GeomEntity.nId)
                                        If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                           EgtSetInfo(nOtherId, ENTITY_NAME, PartManager_GeomEntity.sName)
                                        End If
                                     Case Else
                                        ' altrimenti la sposto solamente
                                        EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
-                                       ' coloro l'entita'
-                                       EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Others)
+                                       ' elimino colore entita'
+                                       EgtResetColor(PartManager_GeomEntity.nId)
                                        If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
                                           EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
                                        End If
@@ -464,11 +470,11 @@ Public Class ManagePartPanelVM
             ' elimino vecchio pezzo d'importazione
             EgtErase(m_nImportedPartId)
 
-            EgtDraw()
-
          Case ManagePartType.MODIFY
             ' nulla da fare
       End Select
+      EgtDeselectAll()
+      EgtDraw()
       ' ripristino modalita' standard
       Map.refTopPanelVM.SelPage = Pages.MODIFY
    End Sub
@@ -489,6 +495,7 @@ Public Class ManagePartPanelVM
    Public Sub Cancel()
       ' elimino pezzo importato
       EgtErase(m_nImportedPartId)
+      EgtDeselectAll()
       EgtDraw()
       ' se ci sono pezzi
       If Map.refTopPanelVM.PartList.Count > 0 Then

Icarus/ManagePartPanel/ManagePartUtility.vb

@@ -625,8 +625,14 @@ Public Class GeomEntity_MenuItem
             Case ManagePartPanelVM.ManagePartType.IMPORT
                Dim NewPart As ManagePart_Part = New ManagePart_Part(Nothing)
                Map.refManagePartPanelVM.ManagerPartList.Add(NewPart)
-               ' elimino entity dalla lista entita' importate
-               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+               ' se l'entita' e' gia' in lista pezzi
+               If Not IsNothing(m_OrigEntity.OrigLayer) Then
+                  ' elimino dalla lista pezzi
+                  m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+               Else
+                  ' altrimenti lo elimino dalla lista entita' importate
+                  Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+               End If
                If Not IsNothing(NewPart) Then
                   Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
                   If Not IsNothing(NewLayer) Then
@@ -700,13 +706,6 @@ Public Class GeomEntity_MenuItem
                Dim ManagePart_Part As ManagePart_Part = New ManagePart_Part(NewPart)
                ' elimino da posizione originale
                m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
-               'Dim bUpdateAllContextMenu As Boolean = False
-               'Dim NewLayer As ManagePart_Layer = ManagePart_Part.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
-               'If Not IsNothing(NewLayer) Then
-               '   NewLayer.EntityList.Add(m_OrigEntity)
-               '   ' aggiorno riferimenti nell'entita'
-               '   m_OrigEntity.UpdateOrigLayer(NewLayer)
-               'End If
                EgtSetInfo(nPartId, PART_NAME, ManagePart_Part.sName)
                ' lo aggiungo a lista
                Map.refManagePartPanelVM.ManagerPartList.Add(ManagePart_Part)
@@ -715,6 +714,9 @@ Public Class GeomEntity_MenuItem
                ' Imposto flag di ricalcolo slice
                EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
          End Select
+         '' aggiorno visibilita' da check di categoria
+         'Dim PrintLayer As ViewLayer = Map.refViewLayerManagerVM.LayerList.FirstOrDefault(Function(x) x.Type = ViewLayer.ViewLayerType.PRINT_SOLID)
+         'EgtSetStatus(m_OrigEntity.nId, If(IsNothing(PrintLayer.bIsVisible) OrElse PrintLayer.bIsVisible, GDB_ST.ON_, GDB_ST.OFF))
          Return
       End If
       Select Case Map.refManagePartPanelVM.Type
@@ -761,6 +763,14 @@ Public Class GeomEntity_MenuItem
                Select Case m_OrigEntity.OrigLayer.Type
                   Case ManagePart_Layer.LayerType.PRINT_SOLID
                      EgtResetMark(m_OrigEntity.nId)
+                     ' se e' presente flag di spostamento a 45 gradi
+                     Dim nPartId As Integer = EgtGetParent(EgtGetParent(m_OrigEntity.nId))
+                     Dim vtMoved As Vector3d
+                     If EgtGetInfo(nPartId, "MovedPart", vtMoved) Then
+                        ' lo sposto e rimuovo info
+                        EgtMove(m_OrigEntity.nId, -vtMoved, GDB_RT.GLOB)
+                        EgtRemoveInfo(nPartId, "MovedPart")
+                     End If
                   Case ManagePart_Layer.LayerType.MACH_START
                   Case ManagePart_Layer.LayerType.RIBS
                      EgtRemoveInfo(m_OrigEntity.nId, KEY_RIB_TYPE)
@@ -788,6 +798,8 @@ Public Class GeomEntity_MenuItem
                   Case ManagePart_Layer.LayerType.PRINT_SOLID
                      EgtSetName(m_OrigEntity.nId, PRINT_SOLID)
                      EgtSetColor(m_OrigEntity.nId, c3Print)
+                     ' rimuovo eventuale nota spostamento per 45 gradi
+                     EgtRemoveInfo(m_OrigEntity.OrigLayer.OrigPart.nId, "MovedPart")
                   Case ManagePart_Layer.LayerType.MACH_START
                      EgtSetName(m_OrigEntity.nId, LAY_MACH_START)
                      EgtSetColor(m_OrigEntity.nId, c3MachStart)

Icarus/ModifyPartPanel/ModifyPartUtility.vb

@@ -346,7 +346,7 @@ Public Class MenuItemVm
       m_Part = Part
    End Sub
 
-#Region "Cancel"
+#Region "Command"
 
    Public ReadOnly Property MenuItem_Command As ICommand
       Get
@@ -430,6 +430,6 @@ Public Class MenuItemVm
       End If
    End Sub
 
-#End Region ' Cancel
+#End Region ' Command
 
 End Class

Icarus/My Project/AssemblyInfo.vb

@@ -11,6 +11,7 @@ Imports System.Windows
 
 ' Review the values of the assembly attributes
 
+#If PLATFORM = "x64" Then
 #If DEBUG Then
 <Assembly: AssemblyTitle("IcarusD64.exe")>
 <Assembly: AssemblyDescription("Icarus Debug 64 bit")>
@@ -18,6 +19,15 @@ Imports System.Windows
 <Assembly: AssemblyTitle("IcarusR64.exe")>
 <Assembly: AssemblyDescription("Icarus 64 bit")>
 #End If
+#Else
+#If DEBUG Then
+<Assembly: AssemblyTitle("IcarusD32.exe")>
+<Assembly: AssemblyDescription("Icarus Debug 32 bit")>
+#Else
+<Assembly: AssemblyTitle("IcarusR32.exe")>
+<Assembly: AssemblyDescription("Icarus 32 bit")>
+#End If
+#End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("Icarus")>
 <Assembly: AssemblyCopyright("Copyright ©  2022 by Egalware s.r.l.")>
@@ -60,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.11.4")>
-<Assembly: AssemblyFileVersion("2.4.11.4")>
+<Assembly: AssemblyVersion("2.4.12.3")>
+<Assembly: AssemblyFileVersion("2.4.12.3")>

Icarus/OptionsWindow/OptionWindowV.xaml

@@ -80,13 +80,6 @@
       </TabItem>
       <TabItem Header="{Binding CADMsg}">
          <StackPanel Margin="5,5,5,0">
-            <!--<UniformGrid Columns="2"
-                         Margin="0,0,0,5">
-               <TextBlock Text="{Binding DefMaterialColorMsg}" VerticalAlignment="Center"/>
-               <Button Background="{Binding DefMaterialColor}"
-                       Command="{Binding DefMaterialColor_Command}"
-                       Style="{StaticResource EgtWPFLib5_InputButton}"/>
-            </UniformGrid>-->
             <UniformGrid Grid.ColumnSpan="2" Columns="2"
                          Margin="0,0,0,5">
                <TextBlock Text="{Binding GeometryToleranceMsg}" VerticalAlignment="Center"/>
@@ -94,6 +87,38 @@
                         VerticalContentAlignment="Center"
                         Margin="10,0,0,0"/>
             </UniformGrid>
+            <ItemsControl ItemsSource="{Binding LayerColorList}">
+               <ItemsControl.ItemTemplate>
+                  <DataTemplate>
+                     <UniformGrid Columns="2"
+                         Margin="0,0,0,5">
+                        <TextBlock Text="{Binding Color_Msg}" VerticalAlignment="Center"/>
+                        <Grid Margin="10,0,0,0">
+                           <Grid.ColumnDefinitions>
+                              <ColumnDefinition Width="Auto"/>
+                              <ColumnDefinition Width="1*"/>
+                              <ColumnDefinition Width="35"/>
+                           </Grid.ColumnDefinitions>
+                           <Button Background="{Binding Background}"
+                          Command="{Binding Color_Command}"
+                          Margin="0,0,5,0"
+                          Style="{StaticResource EgtWPFLib5_InputButton}"/>
+                           <Slider Grid.Column="1"
+                          Value="{Binding dAlpha}"
+                          Minimum="10"
+                          Maximum="100"
+                          TickPlacement="BottomRight"
+                          TickFrequency="10"
+                          IsSnapToTickEnabled="True"
+                          Margin="0,0,5,0"/>
+                           <TextBlock Grid.Column="2"
+                             Text="{Binding sAlpha}"
+                             TextAlignment="Right"/>
+                        </Grid>
+                     </UniformGrid>
+                  </DataTemplate>
+               </ItemsControl.ItemTemplate>
+            </ItemsControl>
             <!--<GroupBox Grid.Column="1" Grid.RowSpan="2"
                       Header="{Binding DimensionMsg}"
                       Margin="0,0,0,5">

Icarus/OptionsWindow/OptionWindowVM.vb

@@ -179,12 +179,16 @@ Public Class OptionWindowVM
       End Get
    End Property
 
-   Public ReadOnly Property DefMaterialColor As Brush
+   ' lista oggetti che gestiscono colori e trasparenze delle catogorie
+   Private m_LayerColorList As New ObservableCollection(Of LayerColor)({New LayerColor(LayerColor.LayerType.PRINTPART),
+                                                                        New LayerColor(LayerColor.LayerType.RIBS),
+                                                                        New LayerColor(LayerColor.LayerType.SHELLNUMBERS),
+                                                                        New LayerColor(LayerColor.LayerType.AUXSOLIDS),
+                                                                        New LayerColor(LayerColor.LayerType.MACHSTART),
+                                                                        New LayerColor(LayerColor.LayerType.OTHERS)})
+   Public ReadOnly Property LayerColorList As ObservableCollection(Of LayerColor)
       Get
-         Return New SolidColorBrush(Color.FromArgb(CByte(255),
-                                                   CByte(OptionModule.m_DefMaterialColor.R),
-                                                   CByte(OptionModule.m_DefMaterialColor.G),
-                                                   CByte(OptionModule.m_DefMaterialColor.B)))
+         Return m_LayerColorList
       End Get
    End Property
 
@@ -195,7 +199,7 @@ Public Class OptionWindowVM
       Set(value As Boolean)
          OptionModule.m_bThickLine = value
          WriteMainPrivateProfileString(S_SCENE, K_LINEWIDTH, If(value, "2", "1"))
-         EgtSetLineAttribs( If( value, 2, 1))
+         EgtSetLineAttribs(If(value, 2, 1))
       End Set
    End Property
 
@@ -510,11 +514,11 @@ Public Class OptionWindowVM
    'End Property
 
    ' Definizione comandi
+
    Private m_cmdTopSceneBackground As ICommand
    Private m_cmdBotSceneBackground As ICommand
    Private m_cmdGridColor As ICommand
    Private m_cmdUpdateLicenceCmd As ICommand
-   Private m_cmdDefMaterialColor As ICommand
    Private m_cmdAddMachineCmd As ICommand
    Private m_cmdExportMachineCmd As ICommand
 
@@ -583,11 +587,6 @@ Public Class OptionWindowVM
          Return EgtMsg(6513)
       End Get
    End Property
-   Public ReadOnly Property DefMaterialColorMsg As String
-      Get
-         Return EgtMsg(6512)
-      End Get
-   End Property
 
    Public ReadOnly Property ImportMsg As String
       Get
@@ -747,9 +746,35 @@ Public Class OptionWindowVM
 
 #End Region
 
-   Public Function WritePrivateProfileColor(IpAppName As String, IpKeyName As String, ByRef Color As Color3d) As Boolean
-      Dim sColor As String = Color.R & "," & Color.G & "," & Color.B
-      Return EgtUILib.WritePrivateProfileString(IpAppName, IpKeyName, sColor, m_sIniFile)
+   Private Function SelectColor(Col As Color3d, ByRef NewCol As Color3d) As Boolean
+      ' Recupero colori custom
+      Dim sCustomColors As String = ""
+      GetMainPrivateProfileString(S_COLORS, K_CUSTOMCOLORS, "", sCustomColors)
+      Dim CustomColors() As String = sCustomColors.Split(","c)
+      Dim nCustomColors As New List(Of Integer)
+      For Each Color In CustomColors
+         Dim nColor As Integer
+         If Integer.TryParse(Color, nColor) Then
+            nCustomColors.Add(nColor)
+         End If
+      Next
+      ' Creo dialogo colori
+      Dim ColorDlg As New System.Windows.Forms.ColorDialog
+      ColorDlg.FullOpen = True
+      ColorDlg.CustomColors = nCustomColors.ToArray()
+      ColorDlg.Color = Col.ToColor()
+      ' Visualizzo dialogo
+      If ColorDlg.ShowDialog() <> Windows.Forms.DialogResult.OK Then Return False
+      ' Recupero colore scelto
+      NewCol.FromColor(ColorDlg.Color)
+      ' Salvo eventuali modifiche ai colori custom
+      sCustomColors = ""
+      For Each Color In ColorDlg.CustomColors
+         sCustomColors &= Color.ToString() & ","
+      Next
+      sCustomColors = sCustomColors.Trim({" "c, ","c})
+      WriteMainPrivateProfileString(S_COLORS, K_CUSTOMCOLORS, sCustomColors)
+      Return True
    End Function
 
 #Region "COMMANDS"
@@ -854,41 +879,6 @@ Public Class OptionWindowVM
 
 #End Region ' GridColor
 
-#Region "DefMaterialColor"
-
-   '''' <summary>
-   '''' Returns a command that remove the current selected machining.
-   '''' </summary>
-   'Public ReadOnly Property DefMaterialColor_Command() As ICommand
-   '   Get
-   '      If m_cmdDefMaterialColor Is Nothing Then
-   '         m_cmdDefMaterialColor = New Command(AddressOf DefMaterialColorCmd)
-   '      End If
-   '      Return m_cmdDefMaterialColor
-   '   End Get
-   'End Property
-
-   '''' <summary>
-   '''' Manage the MachiningDb closing.  This method is invoked by the CloseMachiningDbCommand.
-   '''' </summary>
-   'Public Sub DefMaterialColorCmd()
-   '   ' Recupero colore da Ini
-   '   Dim DefColor As New Color3d(192, 192, 192)
-   '   GetMainPrivateProfileColor(S_GEOMDB, K_DEFAULTCOLOR, DefColor)
-   '   ' Eseguo modifica con dialogo
-   '   If SelectColor(DefColor, DefColor) Then
-   '      OptionModule.m_DefMaterialColor = DefColor
-   '      Map.refSceneHostVM.MainScene.SetDefaultMaterial(OptionModule.m_DefMaterialColor)
-   '      WritePrivateProfileColor(S_GEOMDB, K_DEFAULTCOLOR, OptionModule.m_DefMaterialColor)
-   '      EgtDraw()
-   '      Map.refManageLayerExpanderVM.UpdateHeaderColor(OptionModule.m_DefMaterialColor)
-   '      Map.refManageLayerExpanderVM.LoadObjTree()
-   '      NotifyPropertyChanged("DefMaterialColor")
-   '   End If
-   'End Sub
-
-#End Region ' DefMaterialColor
-
 #Region "UpdateLicence"
 
    ''' <summary>
@@ -1165,10 +1155,94 @@ Public Class OptionWindowVM
 
 #End Region    ' COMMANDS
 
+End Class
+
+Public Class LayerColor
+   Inherits VMBase
+
+   Public Enum LayerType As Integer
+      PRINTPART = 1
+      RIBS = 2
+      SHELLNUMBERS = 3
+      AUXSOLIDS = 4
+      MACHSTART = 5
+      OTHERS = 6
+   End Enum
+
+   Private m_Type As LayerType
+   Public ReadOnly Property c3Color As Color3d
+      Get
+         Select Case m_Type
+            Case LayerType.PRINTPART
+               Return GeomEntityColors.c3Print
+            Case LayerType.RIBS
+               Return GeomEntityColors.c3Rib
+            Case LayerType.SHELLNUMBERS
+               Return GeomEntityColors.c3ShellNumber
+            Case LayerType.AUXSOLIDS
+               Return GeomEntityColors.c3AuxSolids
+            Case LayerType.MACHSTART
+               Return GeomEntityColors.c3MachStart
+            Case LayerType.OTHERS
+               Return GeomEntityColors.c3Others
+         End Select
+      End Get
+   End Property
+
+   Public ReadOnly Property Background As Brush
+      Get
+         Return New SolidColorBrush(Color.FromArgb(CByte(255),
+                                                   CByte(c3Color.R),
+                                                   CByte(c3Color.G),
+                                                   CByte(c3Color.B)))
+      End Get
+   End Property
+
+   Public Property dAlpha As Double
+      Get
+         Return c3Color.A
+      End Get
+      Set(value As Double)
+         GeomEntityColors.SetAlpha(m_Type, value)
+         NotifyPropertyChanged(NameOf(sAlpha))
+      End Set
+   End Property
+
+   Public ReadOnly Property sAlpha As String
+      Get
+         Return c3Color.A & "%"
+      End Get
+   End Property
+
+   Public ReadOnly Property Color_Msg As String
+      Get
+         Select Case m_Type
+            Case LayerType.PRINTPART
+               Return "Print"
+            Case LayerType.RIBS
+               Return "Ribs"
+            Case LayerType.SHELLNUMBERS
+               Return "Reduce Shell Number"
+            Case LayerType.AUXSOLIDS
+               Return "Filled Solids"
+            Case LayerType.MACHSTART
+               Return "Layer Start"
+            Case LayerType.OTHERS
+               Return "Others"
+         End Select
+      End Get
+   End Property
+
+   Private m_cmdColor As ICommand
+
+   Sub New(Type As LayerType)
+      m_Type = Type
+   End Sub
+
    Private Function SelectColor(Col As Color3d, ByRef NewCol As Color3d) As Boolean
       ' Recupero colori custom
       Dim sCustomColors As String = ""
-      GetMainPrivateProfileString(S_SCENE, K_CUSTOMCOLORS, "", sCustomColors)
+      GetMainPrivateProfileString(S_COLORS, K_CUSTOMCOLORS, "", sCustomColors)
       Dim CustomColors() As String = sCustomColors.Split(","c)
       Dim nCustomColors As New List(Of Integer)
       For Each Color In CustomColors
@@ -1192,10 +1266,39 @@ Public Class OptionWindowVM
          sCustomColors &= Color.ToString() & ","
       Next
       sCustomColors = sCustomColors.Trim({" "c, ","c})
-      WriteMainPrivateProfileString(S_SCENE, K_CUSTOMCOLORS, sCustomColors)
+      WriteMainPrivateProfileString(S_COLORS, K_CUSTOMCOLORS, sCustomColors)
       Return True
    End Function
 
+#Region "Color"
+
+   ''' <summary>
+   ''' Returns a command that remove the current selected machining.
+   ''' </summary>
+   Public ReadOnly Property Color_Command() As ICommand
+      Get
+         If m_cmdColor Is Nothing Then
+            m_cmdColor = New Command(AddressOf ColorCmd)
+         End If
+         Return m_cmdColor
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Manage the MachiningDb closing.  This method is invoked by the CloseMachiningDbCommand.
+   ''' </summary>
+   Public Sub ColorCmd()
+      ' Recupero colore da Ini
+      Dim c3Print As Color3d = c3Color
+      ' Eseguo modifica con dialogo
+      If SelectColor(c3Color, c3Print) Then
+         GeomEntityColors.SetColor(m_Type, c3Print)
+         NotifyPropertyChanged(NameOf(Background))
+      End If
+   End Sub
+
+#End Region ' PrintPartColor
+
 End Class
 
 'Public Class GeomTypeConverter

Icarus/ReferencePanel/ReferencePanelVM.vb

@@ -104,7 +104,7 @@ Public Class ReferencePanelVM
                ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
          End Select
          Dim vtMovedPart As Vector3d
-         EgtGetInfo(Map.refTopPanelVM.SelPart.nPrintSolidId, "MovedPart", vtMovedPart)
+         EgtGetInfo(Map.refTopPanelVM.SelPart.nPartId, "MovedPart", vtMovedPart)
          ptOrig = ptOrig - vtMovedPart
          frPrintSolid = New Frame3d(ptOrig)
       End If

Icarus/RibPanel/RibPanelV.xaml

@@ -206,6 +206,7 @@
                  Grid.Row="6"
                  Content="Grid"
                  IsChecked="{Binding bGrid_IsChecked}"
+                 IsEnabled="{Binding bGrid_IsEnabled}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
    <Border Grid.Column="1"
            Grid.Row="5"
@@ -515,15 +516,15 @@
          <UniformGrid Columns="3">
             <RadioButton Content="X"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[0]}"
+                            IsChecked="{Binding RotX}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
             <RadioButton Content="Y"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[1]}"
+                            IsChecked="{Binding RotY}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
             <RadioButton Content="Z"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[2]}"
+                            IsChecked="{Binding RotZ}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
          </UniformGrid>
          <EgtWPFLib5:EgtTextBox Grid.Row="1"

Icarus/RibPanel/RibPanelVM.vb

@@ -41,7 +41,7 @@ Public Class RibPanelVM
       End Get
       Set(value As RibEntity)
          m_SelRib = value
-         EgtDeselectLayerObjs(m_nRibLayerId)
+         EgtDeselectAll()
          If Not IsNothing(value) Then
             EgtSelectObj(value.nCurveId)
             EgtSelectObj(value.nExtrusionId)
@@ -74,8 +74,8 @@ Public Class RibPanelVM
          Dim dNewXPos As Double = b3Reference.Min.x
          StringToLen(value, dNewXPos)
          If dNewXPos >= 0 AndAlso dNewXPos <= CurrentMachine.b3Tab.DimX Then
-            EgtMove(m_SelRib.nCurveId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min)
-            EgtMove(m_SelRib.nExtrusionId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min)
+            EgtMove(m_SelRib.nCurveId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
+            EgtMove(m_SelRib.nExtrusionId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sXPos))
@@ -103,8 +103,8 @@ Public Class RibPanelVM
          Dim dNewYPos As Double = b3Reference.Min.y
          StringToLen(value, dNewYPos)
          If dNewYPos >= 0 AndAlso dNewYPos <= CurrentMachine.b3Tab.DimY Then
-            EgtMove(m_SelRib.nCurveId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min)
-            EgtMove(m_SelRib.nExtrusionId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min)
+            EgtMove(m_SelRib.nCurveId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
+            EgtMove(m_SelRib.nExtrusionId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sYPos))
@@ -132,8 +132,8 @@ Public Class RibPanelVM
          Dim dNewZPos As Double = b3Reference.Min.y
          StringToLen(value, dNewZPos)
          If dNewZPos >= 0 Then
-            EgtMove(m_SelRib.nCurveId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min)
-            EgtMove(m_SelRib.nExtrusionId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min)
+            EgtMove(m_SelRib.nCurveId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min, GDB_RT.GLOB)
+            EgtMove(m_SelRib.nExtrusionId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sZPos))
@@ -144,12 +144,28 @@ Public Class RibPanelVM
    End Property
 
    Private m_RotAxes() As Boolean = {False, False, True}
-   Public Property RotAxes As Boolean()
+   Public Property RotX As Boolean
       Get
-         Return m_RotAxes
+         Return m_RotAxes(0)
       End Get
-      Set(value As Boolean())
-         m_RotAxes = value
+      Set(value As Boolean)
+         m_RotAxes(0) = value
+      End Set
+   End Property
+   Public Property RotY As Boolean
+      Get
+         Return m_RotAxes(1)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(1) = value
+      End Set
+   End Property
+   Public Property RotZ As Boolean
+      Get
+         Return m_RotAxes(2)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(2) = value
       End Set
    End Property
 
@@ -159,7 +175,7 @@ Public Class RibPanelVM
             Return Vector3d.X_AX
          ElseIf m_RotAxes(1) Then
             Return Vector3d.Y_AX
-         ElseIf m_RotAxes(2) Then
+         Else
             Return Vector3d.Z_AX
          End If
       End Get
@@ -179,20 +195,20 @@ Public Class RibPanelVM
          End If
          Dim nId As Integer = If(m_SelRib.Type = RibEntity.RibTypes.FROMDRAW, m_SelRib.nCurveId, m_SelRib.nExtrusionId)
          Dim b3Rib As New BBox3d
-         EgtGetBBox(nId, GDB_BB.STANDARD, b3Rib)
+         EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Rib)
          Dim bOk As Boolean = False
-         bOk = EgtRotate(nId, b3Rib.Center(), vtSelRotAxes, dNewAngle)
-         If bOk AndAlso m_SelRib.Type = RibEntity.RibTypes.FROMDRAW Then EgtRotate(m_SelRib.nExtrusionId, b3Rib.Center, vtSelRotAxes, dNewAngle)
+         bOk = EgtRotate(nId, b3Rib.Center(), vtSelRotAxes, dNewAngle, GDB_RT.GLOB)
+         If bOk AndAlso m_SelRib.Type = RibEntity.RibTypes.FROMDRAW Then EgtRotate(m_SelRib.nExtrusionId, b3Rib.Center, vtSelRotAxes, dNewAngle, GDB_RT.GLOB)
          If bOk Then
             EgtDraw()
             RefreshPos()
             m_sRotAngle = 0
             NotifyPropertyChanged(NameOf(sRotAngle))
+            ' Imposto flag di ricalcolo slice
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
          Else
             m_sRotAngle = value
          End If
-         ' Imposto flag di ricalcolo slice
-         EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Set
    End Property
 
@@ -264,6 +280,12 @@ Public Class RibPanelVM
       End Set
    End Property
 
+   Public ReadOnly Property bGrid_IsEnabled As Boolean
+      Get
+         Return Map.refMyStatusBarVM.bGridVisibility
+      End Get
+   End Property
+
    Private m_bMove_IsChecked As Boolean
    Public Property bMove_IsChecked As Boolean
       Get
@@ -411,6 +433,9 @@ Public Class RibPanelVM
 #Region "METHODS"
 
    Friend Sub Init()
+      ' asse rotazione di default
+      RotZ = True
+      NotifyPropertyChanged(NameOf(RotZ))
       ' azzero indice 
       StartEntity.ResetSharedIndex()
       ' fisso frame originale
@@ -418,6 +443,10 @@ Public Class RibPanelVM
       ' recupero dati pezzo selezionato layer ed entita'
       m_nPartId = Map.refTopPanelVM.SelPart.nPartId
       m_nRibLayerId = Map.refTopPanelVM.SelPart.nRibsLayerId
+      If m_nRibLayerId = GDB_ID.NULL Then
+         m_nRibLayerId = EgtCreateGroup(m_nPartId)
+         EgtSetName(m_nRibLayerId, LAY_RIBS)
+      End If
       'recupero tutte le entita' rib
       m_RibList.Clear()
       Dim nRibId As Integer = EgtGetFirstInGroup(m_nRibLayerId)
@@ -525,7 +554,8 @@ Public Class RibPanelVM
             EgtDraw()
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
-         Case Controller.CMD.GRID_ELEVATION, Controller.CMD.GRID_3P, Controller.CMD.GRID_ORIGIN, Controller.CMD.GRID_PERPCURVE, Controller.CMD.GRID_ROTATE, Controller.CMD.GRID_ROTATE3D
+         Case Controller.CMD.GRID_ELEVATION, Controller.CMD.GRID_3P, Controller.CMD.GRID_ORIGIN, Controller.CMD.GRID_PERPCURVE,
+              Controller.CMD.GRID_ROTATE, Controller.CMD.GRID_ROTATE3D, Controller.CMD.GRID_OBJ
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
       End Select
@@ -1162,6 +1192,7 @@ Public Class RibPanelVM
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
       ' salvo selezione precedente e deseleziono altri oggetti
+      m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
       While nSelObjId <> GDB_ID.NULL
          m_PrevSelObjs.Add(nSelObjId)

Icarus/RibParamPanel/RibParamPanelVM.vb

@@ -44,6 +44,7 @@ Public Class RibParamPanelVM
       m_MachiningParamList = New List(Of MachiningParam)({New RibComboMachiningParam(MachiningParam.Params.RIBSTYPE, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSLINK, nRibId, nPartId),
                                                           New RibCheckMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nRibId, nPartId),
                                                           New RibCheckMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADINLEN, nRibId, nPartId),
@@ -477,9 +478,9 @@ Public Class RibCheckMachiningParam
       MyBase.New(Type)
       Dim bReadFromPart As Boolean = False
       Select Case Type
-         'Case Params.RIBSLINK
-         '   bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLINK, m_bValue)
-         '   EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_bPartValue)
+         Case Params.RIBSLINK
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLINK, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSLINK, m_bPartValue)
          Case Params.RIBSINVERTDIRECTION
             bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSINVERTDIRECTION, m_bValue)
             EgtGetInfo(nPartId, MAC_RIBSINVERTDIRECTION, m_bPartValue)
@@ -499,12 +500,12 @@ Public Class RibCheckMachiningParam
 
    Friend Sub WriteParamInRib(nRibId As Integer)
       Select Case Type
-         'Case Params.RIBSLINK
-         '   If bIsModifiedFromPart Then
-         '      EgtSetInfo(nRibId, MAC_RIBSLINK, If(m_bValue, 1, 0))
-         '   Else
-         '      EgtRemoveInfo(nRibId, MAC_RIBSLINK)
-         '   End If
+         Case Params.RIBSLINK
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSLINK, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSLINK)
+            End If
          Case Params.RIBSINVERTDIRECTION
             If bIsModifiedFromPart Then
                EgtSetInfo(nRibId, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0))

Icarus/SceneHost/MySceneHostVM.vb

@@ -11,6 +11,8 @@ Public Class MySceneHostVM
       m_bIsFocused = bValue
    End Sub
 
+   ' Flag per distinguere tra Save a SaveAs
+   Private m_bIsSaveAs As Boolean = False
    ' Identificativi per pezzo da selezionare/deselezionare
    Private m_nIdToSel As Integer = GDB_ID.NULL
    Private m_nIdToDesel As Integer = GDB_ID.NULL
@@ -293,7 +295,9 @@ Public Class MySceneHostVM
    End Sub
 
    Public Overrides Sub SaveAsProject()
+      m_bIsSaveAs = True
       MyBase.SaveAsProject()
+      m_bIsSaveAs = False
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
    End Sub
@@ -897,7 +901,7 @@ Public Class MySceneHostVM
          End If
          If IsNothing(ProjectMaterial) Then
             Dim sMaterialName As String = ""
-            EgtGetInfo(nTabPartId, KEY_MATERIAL_NAME, Map.refTopPanelVM.SelMaterial.sName)
+            EgtGetInfo(nTabPartId, KEY_MATERIAL_NAME, sMaterialName)
             ProjectMaterial = Map.refTopPanelVM.MaterialList.FirstOrDefault(Function(x) x.sName = sMaterialName)
          End If
          If Not IsNothing(ProjectMaterial) Then
@@ -936,10 +940,12 @@ Public Class MySceneHostVM
          ' setto i solidi non calcolati
          EgtSetInfo(nPartId, KEY_CALC_SOLIDS, 0)
          EgtSetInfo(nPartId, KEY_HAS_SOLIDS, 0)
-         nPartId = EgtGetNextPart(nPartId)
          ' Ripristino stato segnalazione modifica
          DisableMgr.ReEnable()
+         nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno colori entita'
+      GeomEntityColors.UpdateColors(LayerType.ALL)
 
       ' se non e' da ricalcolare, recupero tempo e massa
       If Not bProjectToRecalc Then
@@ -963,6 +969,13 @@ Public Class MySceneHostVM
    End Sub
 
    Private Sub OnSavingProject(ByVal sender As Object, sFile As String)
+      ' Se in SaveAs, aggiorno nome CN da generare
+      If m_bIsSaveAs Then
+         Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+         If nTabPartId <> GDB_ID.NULL Then
+            EgtRemoveInfo(nTabPartId, KEY_ISOFILE_PATH)
+         End If
+      End If
    End Sub
 
    Private Sub OnSavedProject(ByVal sender As Object, ByVal sFile As String, ByVal bOk As Boolean)
@@ -1191,20 +1204,6 @@ Public Class MySceneHostVM
       End While
       ' Memorizzo Id da selezionare
       m_nIdToSel = nCurrIdToSel
-      'While nId <> GDB_ID.NULL
-      '   ' Recupero l'identificativo del pezzo cui appartiene
-      '   Dim nPartId As Integer = EgtGetParent(EgtGetParent(nId))
-      '   Dim bFound As Boolean = False
-      '   If nPartId = Map.refImportPanelVM.nImportedPartId Then bFound = True
-      '   If Not bFound Then
-      '      nId = EgtGetNextObjInSelWin()
-      '      Continue While
-      '   End If
-      '   ' Memorizzo Id da selezionare
-      '   m_nIdToSel = nId
-      '   Exit While
-      '   nId = EgtGetNextObjInSelWin()
-      'End While
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1254,17 +1253,15 @@ Public Class MySceneHostVM
             End If
          Else
             ' Recupero l'identificativo del pezzo cui appartiene
-            Dim nPartId As Integer = EgtGetParent(nId)
-            Dim bFound As Boolean = False
-            If nPartId = Map.refStartMachPanelVM.nStartMachLayerId Then bFound = True
-            If bFound Then
+            Dim nStartMachLayerId As Integer = EgtGetParent(nId)
+            If nStartMachLayerId = Map.refStartMachPanelVM.nStartMachLayerId Then
                m_nIdToSel = nId
                Exit While
             End If
          End If
          nId = EgtGetNextObjInSelWin()
       End While
-      If m_nIdToSel <> GDB_ID.NULL Then
+      If Map.refStartMachPanelVM.bCPlaneObj_IsActive And m_nIdToSel <> GDB_ID.NULL Then
          ' recupero dati punto di selezione
          Dim PtTemp As Point3d
          Dim nAux As Integer
@@ -1337,18 +1334,15 @@ Public Class MySceneHostVM
                Exit While
             End If
          Else
-            ' Recupero l'identificativo del pezzo cui appartiene
-            Dim nPartId As Integer = EgtGetParent(nId)
-            Dim bFound As Boolean = False
-            If nPartId = Map.refRibPanelVM.nRibLayerId Then bFound = True
-            If bFound Then
+            Dim nRibLayerId As Integer = EgtGetParent(nId)
+            If nRibLayerId = Map.refRibPanelVM.nRibLayerId Then
                m_nIdToSel = nId
                Exit While
             End If
          End If
          nId = EgtGetNextObjInSelWin()
       End While
-      If m_nIdToSel <> GDB_ID.NULL Then
+      If Map.refRibPanelVM.bCPlaneObj_IsActive And m_nIdToSel <> GDB_ID.NULL Then
          ' recupero dati punto di selezione
          Dim PtTemp As Point3d
          Dim nAux As Integer
@@ -1415,17 +1409,22 @@ Public Class MySceneHostVM
       EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
       Dim nId As Integer = EgtGetFirstObjInSelWin()
       While nId <> GDB_ID.NULL
-         ' Recupero l'identificativo del pezzo cui appartiene
-         Dim nPartId As Integer = EgtGetParent(nId)
-         Dim bFound As Boolean = False
-         If nPartId = Map.refShellNumberPanelVM.nShellNumberLayerId Then bFound = True
-         If bFound Then
-            m_nIdToSel = nId
-            Exit While
+         ' Se per Griglia da faccia di oggetto
+         If Map.refShellNumberPanelVM.bCPlaneObj_IsActive Then
+            If EgtGetType( nId) = GDB_TY.SRF_MESH Then
+               m_nIdToSel = nId
+               Exit While
+            End If
+         Else
+            Dim nShellNumberLayerId As Integer = EgtGetParent(nId)
+            If nShellNumberLayerId = Map.refShellNumberPanelVM.nShellNumberLayerId Then
+               m_nIdToSel = nId
+               Exit While
+            End If
          End If
          nId = EgtGetNextObjInSelWin()
       End While
-      If m_nIdToSel <> GDB_ID.NULL Then
+      If Map.refShellNumberPanelVM.bCPlaneObj_IsActive And m_nIdToSel <> GDB_ID.NULL Then
          ' recupero dati punto di selezione
          Dim PtTemp As Point3d
          Dim nAux As Integer
@@ -1480,7 +1479,7 @@ Public Class MySceneHostVM
       EgtDraw()
    End Sub
 
-#End Region       ' Rib
+#End Region       ' ShellNumber
 
 #End Region    ' VIEW EVENTS
 

Icarus/ShellNumberPanel/ShellNumberPanelV.xaml

@@ -206,6 +206,7 @@
                  Grid.Row="6"
                  Content="Grid"
                  IsChecked="{Binding bGrid_IsChecked}"
+                 IsEnabled="{Binding bGrid_IsEnabled}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
    <Border Grid.Column="1"
            Grid.Row="5"
@@ -515,15 +516,15 @@
          <UniformGrid Columns="3">
             <RadioButton Content="X"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[0]}"
+                            IsChecked="{Binding RotX}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
             <RadioButton Content="Y"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[1]}"
+                            IsChecked="{Binding RotY}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
             <RadioButton Content="Z"
                             GroupName="Axes"
-                            IsChecked="{Binding RotAxes[2]}"
+                            IsChecked="{Binding RotZ}"
                             Style="{StaticResource ToolBar_ToggleButton}"/>
          </UniformGrid>
          <EgtWPFLib5:EgtTextBox Grid.Row="1"

Icarus/ShellNumberPanel/ShellNumberPanelVM.vb

@@ -41,7 +41,7 @@ Public Class ShellNumberPanelVM
       End Get
       Set(value As ShellNumberEntity)
          m_SelShellNumber = value
-         EgtDeselectLayerObjs(m_nShellNumberLayerId)
+         EgtDeselectAll()
          If Not IsNothing(value) Then
             EgtSelectObj(value.nCurveId)
             EgtSelectObj(value.nExtrusionId)
@@ -74,8 +74,8 @@ Public Class ShellNumberPanelVM
          Dim dNewXPos As Double = b3Reference.Min.x
          StringToLen(value, dNewXPos)
          If dNewXPos >= 0 AndAlso dNewXPos <= CurrentMachine.b3Tab.DimX Then
-            EgtMove(m_SelShellNumber.nCurveId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min)
-            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min)
+            EgtMove(m_SelShellNumber.nCurveId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
+            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(dNewXPos, b3Reference.Min.y, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sXPos))
@@ -103,8 +103,8 @@ Public Class ShellNumberPanelVM
          Dim dNewYPos As Double = b3Reference.Min.y
          StringToLen(value, dNewYPos)
          If dNewYPos >= 0 AndAlso dNewYPos <= CurrentMachine.b3Tab.DimY Then
-            EgtMove(m_SelShellNumber.nCurveId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min)
-            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min)
+            EgtMove(m_SelShellNumber.nCurveId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
+            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(b3Reference.Min.x, dNewYPos, b3Reference.Min.z) - b3Reference.Min, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sYPos))
@@ -132,8 +132,8 @@ Public Class ShellNumberPanelVM
          Dim dNewZPos As Double = b3Reference.Min.y
          StringToLen(value, dNewZPos)
          If dNewZPos >= 0 Then
-            EgtMove(m_SelShellNumber.nCurveId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min)
-            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min)
+            EgtMove(m_SelShellNumber.nCurveId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min, GDB_RT.GLOB)
+            EgtMove(m_SelShellNumber.nExtrusionId, New Point3d(b3Reference.Min.x, b3Reference.Min.y, dNewZPos) - b3Reference.Min, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sZPos))
@@ -144,12 +144,28 @@ Public Class ShellNumberPanelVM
    End Property
 
    Private m_RotAxes() As Boolean = {False, False, True}
-   Public Property RotAxes As Boolean()
+   Public Property RotX As Boolean
       Get
-         Return m_RotAxes
+         Return m_RotAxes(0)
       End Get
-      Set(value As Boolean())
-         m_RotAxes = value
+      Set(value As Boolean)
+         m_RotAxes(0) = value
+      End Set
+   End Property
+   Public Property RotY As Boolean
+      Get
+         Return m_RotAxes(1)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(1) = value
+      End Set
+   End Property
+   Public Property RotZ As Boolean
+      Get
+         Return m_RotAxes(2)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(2) = value
       End Set
    End Property
 
@@ -159,7 +175,7 @@ Public Class ShellNumberPanelVM
             Return Vector3d.X_AX
          ElseIf m_RotAxes(1) Then
             Return Vector3d.Y_AX
-         ElseIf m_RotAxes(2) Then
+         Else
             Return Vector3d.Z_AX
          End If
       End Get
@@ -179,20 +195,20 @@ Public Class ShellNumberPanelVM
          End If
          Dim nId As Integer = If(m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW, m_SelShellNumber.nCurveId, m_SelShellNumber.nExtrusionId)
          Dim b3Rib As New BBox3d
-         EgtGetBBox(nId, GDB_BB.STANDARD, b3Rib)
+         EgtGetBBoxGlob(nId, GDB_BB.STANDARD, b3Rib)
          Dim bOk As Boolean = False
-         bOk = EgtRotate(nId, b3Rib.Center(), vtSelRotAxes, dNewAngle)
-         If bOk AndAlso m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW Then EgtRotate(m_SelShellNumber.nExtrusionId, b3Rib.Center, vtSelRotAxes, dNewAngle)
+         bOk = EgtRotate(nId, b3Rib.Center(), vtSelRotAxes, dNewAngle, GDB_RT.GLOB)
+         If bOk AndAlso m_SelShellNumber.Type = ShellNumberEntity.ShellNumberTypes.FROMDRAW Then EgtRotate(m_SelShellNumber.nExtrusionId, b3Rib.Center, vtSelRotAxes, dNewAngle, GDB_RT.GLOB)
          If bOk Then
             EgtDraw()
             RefreshPos()
             m_sRotAngle = 0
             NotifyPropertyChanged(NameOf(sRotAngle))
+            ' Imposto flag di ricalcolo slice
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
          Else
             m_sRotAngle = value
          End If
-         ' Imposto flag di ricalcolo slice
-         EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Set
    End Property
 
@@ -264,6 +280,12 @@ Public Class ShellNumberPanelVM
       End Set
    End Property
 
+   Public ReadOnly Property bGrid_IsEnabled As Boolean
+      Get
+         Return Map.refMyStatusBarVM.bGridVisibility
+      End Get
+   End Property
+
    Private m_bMove_IsChecked As Boolean
    Public Property bMove_IsChecked As Boolean
       Get
@@ -411,6 +433,9 @@ Public Class ShellNumberPanelVM
 #Region "METHODS"
 
    Friend Sub Init()
+      ' asse rotazione di default
+      RotZ = True
+      NotifyPropertyChanged(NameOf(RotZ))
       ' azzero indice 
       StartEntity.ResetSharedIndex()
       ' fisso frame originale
@@ -418,7 +443,11 @@ Public Class ShellNumberPanelVM
       ' recupero dati pezzo selezionato layer ed entita'
       m_nPartId = Map.refTopPanelVM.SelPart.nPartId
       m_nShellNumberLayerId = Map.refTopPanelVM.SelPart.nShellNumberLayerId
-      'recupero tutte le entita' rib
+      If m_nShellNumberLayerId = GDB_ID.NULL Then
+         m_nShellNumberLayerId = EgtCreateGroup(m_nPartId)
+         EgtSetName(m_nShellNumberLayerId, LAY_SHELL_NBR)
+      End If
+      'recupero tutte le entita' shell number
       m_ShellNumberList.Clear()
       Dim nShellNumberId As Integer = EgtGetFirstInGroup(m_nShellNumberLayerId)
       While nShellNumberId <> GDB_ID.NULL
@@ -525,7 +554,8 @@ Public Class ShellNumberPanelVM
             EgtDraw()
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
-         Case Controller.CMD.GRID_ELEVATION, Controller.CMD.GRID_3P, Controller.CMD.GRID_ORIGIN, Controller.CMD.GRID_PERPCURVE, Controller.CMD.GRID_ROTATE, Controller.CMD.GRID_ROTATE3D, Controller.CMD.GRID_OBJ
+         Case Controller.CMD.GRID_ELEVATION, Controller.CMD.GRID_3P, Controller.CMD.GRID_ORIGIN, Controller.CMD.GRID_PERPCURVE,
+              Controller.CMD.GRID_ROTATE, Controller.CMD.GRID_ROTATE3D, Controller.CMD.GRID_OBJ
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
       End Select
@@ -1166,6 +1196,7 @@ Public Class ShellNumberPanelVM
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
       ' salvo selezione precedente e deseleziono altri oggetti
+      m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
       While nSelObjId <> GDB_ID.NULL
          m_PrevSelObjs.Add(nSelObjId)
@@ -1308,7 +1339,7 @@ Public Class ShellNumberEntity
    Sub New(Type As ShellNumberTypes, nId As Integer)
       m_nIndex = nSharedIndex
       m_Type = Type
-      EgtSetInfo(nId, KEY_RIB_TYPE, Type)
+      EgtSetInfo(nId, KEY_SHELLNBR_TYPE, Type)
       Select Case Type
          Case ShellNumberTypes.FROMDRAW
             m_nCurveId = nId

Icarus/SliceManager/SliceManagerVM.vb

@@ -506,6 +506,11 @@ Public Class SliceManagerVM
          m_bCalculating = False
          Return
       End If
+      If IsNothing(Map.refTopPanelVM.SelMaterial) Then
+         MessageBox.Show("No print material set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         m_bCalculating = False
+         Return
+      End If
       If IsNothing(Map.refTopPanelVM.SelMachining) OrElse IsNothing(Map.refTopPanelVM.CurrMachining) OrElse Map.refTopPanelVM.CurrMachining.dCurrStrandH <= 0 Then
          MessageBox.Show("No print parameters set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          m_bCalculating = False
@@ -611,9 +616,10 @@ Public Class SliceManagerVM
          Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
          If nTabPartId <> GDB_ID.NULL Then
             EgtGetInfo(nTabPartId, KEY_ISOFILE_PATH, sIsoFilePath)
-            If String.IsNullOrWhiteSpace(sIsoFilePath) Then
+            If String.IsNullOrWhiteSpace(sIsoFilePath) OrElse Not Directory.Exists(Path.GetDirectoryName(sIsoFilePath)) Then
                EgtGetCurrFilePath(sIsoFilePath)
                sIsoFilePath = System.IO.Path.ChangeExtension(sIsoFilePath, sExtension)
+               EgtSetInfo(nTabPartId, KEY_ISOFILE_PATH, sIsoFilePath)
             End If
          End If
       End If

Icarus/SliderManager/SliderManagerVM.vb

@@ -73,7 +73,7 @@ Public Class SliderManagerVM
          Case ViewSliderType.ONLY_SELECTED
             If Not IsNothing(Map.refTopPanelVM.SelPart) Then
                ' riporto vecchio strato a visualizzazione di tutti i solidi
-               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
+               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
                For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
                   If nLayerInd = value - 1 Then
                      EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
@@ -88,7 +88,7 @@ Public Class SliderManagerVM
          Case ViewSliderType.UNTIL_SELECTED
             If Not IsNothing(Map.refTopPanelVM.SelPart) Then
                ' riporto vecchio strato a visualizzazione di tutti i solidi
-               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
+               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
                For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
                   If nLayerInd <= value - 1 Then
                      EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
@@ -103,7 +103,7 @@ Public Class SliderManagerVM
          Case ViewSliderType.FROM_SELECTED
             If Not IsNothing(Map.refTopPanelVM.SelPart) Then
                ' riporto vecchio strato a visualizzazione di tutti i solidi
-               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
+               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
                For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
                   If nLayerInd >= value - 1 Then
                      EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
@@ -353,7 +353,7 @@ Public Class SliderManagerVM
       NotifyPropertyChanged(NameOf(nLayerIndex_Minimum))
       NotifyPropertyChanged(NameOf(nLayerIndex_Maximum))
       NotifyPropertyChanged(NameOf(ghShowMaximum))
-      SetLayerIndex(m_nLayerIndex)
+      SetLayerIndex(If(m_nLayerIndex < nMax, m_nLayerIndex, nMax))
    End Sub
 
    Friend Sub SetLayerIndexToMax()

Icarus/StartMachPanel/StartMachPanelV.xaml

@@ -189,6 +189,7 @@
                  Grid.Row="6"
                  Content="Grid"
                  IsChecked="{Binding bGrid_IsChecked}"
+                 IsEnabled="{Binding bGrid_IsEnabled}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
    <Border Grid.Column="1"
            Grid.Row="5"

Icarus/StartMachPanel/StartMachPanelVM.vb

@@ -36,7 +36,7 @@ Public Class StartMachPanelVM
       End Get
       Set(value As StartEntity)
          m_SelStart = value
-         EgtDeselectLayerObjs(m_nStartMachLayerId)
+         EgtDeselectAll()
          If Not IsNothing(value) Then
             EgtSelectObj(value.nId)
             ' aggiorno visibilita' bottoni edit
@@ -66,7 +66,7 @@ Public Class StartMachPanelVM
          Dim dNewXPos As Double = ptReference.x
          StringToLen(value, dNewXPos)
          If dNewXPos >= 0 AndAlso dNewXPos <= CurrentMachine.b3Tab.DimX Then
-            EgtMove(m_SelStart.nId, New Point3d(dNewXPos, ptReference.y, ptReference.z) - ptReference)
+            EgtMove(m_SelStart.nId, New Point3d(dNewXPos, ptReference.y, ptReference.z) - ptReference, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sXPos))
@@ -92,7 +92,7 @@ Public Class StartMachPanelVM
          Dim dNewYPos As Double = ptReference.y
          StringToLen(value, dNewYPos)
          If dNewYPos >= 0 AndAlso dNewYPos <= CurrentMachine.b3Tab.DimY Then
-            EgtMove(m_SelStart.nId, New Point3d(ptReference.x, dNewYPos, ptReference.z) - ptReference)
+            EgtMove(m_SelStart.nId, New Point3d(ptReference.x, dNewYPos, ptReference.z) - ptReference, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sYPos))
@@ -118,7 +118,7 @@ Public Class StartMachPanelVM
          Dim dNewZPos As Double = ptReference.z
          StringToLen(value, dNewZPos)
          If dNewZPos >= 0 Then
-            EgtMove(m_SelStart.nId, New Point3d(ptReference.x, ptReference.y, dNewZPos) - ptReference)
+            EgtMove(m_SelStart.nId, New Point3d(ptReference.x, ptReference.y, dNewZPos) - ptReference, GDB_RT.GLOB)
             EgtDraw()
          Else
             NotifyPropertyChanged(NameOf(sZPos))
@@ -129,12 +129,28 @@ Public Class StartMachPanelVM
    End Property
 
    Private m_RotAxes() As Boolean = {False, False, True}
-   Public Property RotAxes As Boolean()
+   Public Property RotX As Boolean
       Get
-         Return m_RotAxes
+         Return m_RotAxes(0)
       End Get
-      Set(value As Boolean())
-         m_RotAxes = value
+      Set(value As Boolean)
+         m_RotAxes(0) = value
+      End Set
+   End Property
+   Public Property RotY As Boolean
+      Get
+         Return m_RotAxes(1)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(1) = value
+      End Set
+   End Property
+   Public Property RotZ As Boolean
+      Get
+         Return m_RotAxes(2)
+      End Get
+      Set(value As Boolean)
+         m_RotAxes(2) = value
       End Set
    End Property
 
@@ -144,7 +160,7 @@ Public Class StartMachPanelVM
             Return Vector3d.X_AX
          ElseIf m_RotAxes(1) Then
             Return Vector3d.Y_AX
-         ElseIf m_RotAxes(2) Then
+         Else
             Return Vector3d.Z_AX
          End If
       End Get
@@ -164,16 +180,16 @@ Public Class StartMachPanelVM
          End If
          Dim b3PrintSolid As New BBox3d
          EgtGetBBoxGlob(Map.refTopPanelVM.SelPart.nPartId, GDB_BB.STANDARD, b3PrintSolid)
-         If EgtRotate(Map.refTopPanelVM.SelPart.nPartId, b3PrintSolid.Center, vtSelRotAxes, dNewAngle) Then
+         If EgtRotate(Map.refTopPanelVM.SelPart.nPartId, b3PrintSolid.Center, vtSelRotAxes, dNewAngle, GDB_RT.GLOB) Then
             EgtDraw()
             RefreshPos()
             m_sRotAngle = 0
             NotifyPropertyChanged(NameOf(sRotAngle))
+            ' Imposto flag di ricalcolo slice
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
          Else
             m_sRotAngle = value
          End If
-         ' Imposto flag di ricalcolo slice
-         EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Set
    End Property
 
@@ -243,6 +259,12 @@ Public Class StartMachPanelVM
       End Set
    End Property
 
+   Public ReadOnly Property bGrid_IsEnabled As Boolean
+      Get
+         Return Map.refMyStatusBarVM.bGridVisibility
+      End Get
+   End Property
+
    Private m_bMove_IsChecked As Boolean
    Public Property bMove_IsChecked As Boolean
       Get
@@ -836,6 +858,7 @@ Public Class StartMachPanelVM
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
       ' salvo selezione precedente e deseleziono altri oggetti
+      m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
       While nSelObjId <> GDB_ID.NULL
          m_PrevSelObjs.Add(nSelObjId)

Icarus/StatusBar/MyStatusBarVM.vb

@@ -23,9 +23,13 @@ Public Class MyStatusBarVM
          Return m_bGridVisibility
       End Get
       Set(value As Boolean)
+         If Map.refRibPanelVM.bGrid_IsChecked Or Map.refStartMachPanelVM.bGrid_IsChecked Or Map.refShellNumberPanelVM.bGrid_IsChecked Then Return
          m_bGridVisibility = value
          EgtSetGridShow(value, value)
          EgtDraw()
+         Map.refRibPanelVM.NotifyPropertyChanged(NameOf(Map.refRibPanelVM.bGrid_IsEnabled))
+         Map.refStartMachPanelVM.NotifyPropertyChanged(NameOf(Map.refStartMachPanelVM.bGrid_IsEnabled))
+         Map.refShellNumberPanelVM.NotifyPropertyChanged(NameOf(Map.refShellNumberPanelVM.bGrid_IsEnabled))
       End Set
    End Property
 

Icarus/TSFEditor/TFSEditorV.xaml

@@ -72,15 +72,32 @@
                            Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
+               <Grid>
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="Auto"/>
+                     <ColumnDefinition Width="Auto"/>
+                  </Grid.ColumnDefinitions>
+                  <TextBlock Text="Wait:"
+                             Visibility="{Binding Wait_Visibility}"
+                             Margin="2.5,0,2.5,0"
+                             Style="{StaticResource TSFEditor_TextBlock}"/>
+                  <TextBox Grid.Column="1"
+                           Text="{Binding sWait}"
+                           Width="50"
+                           Visibility="{Binding Wait_Visibility}"
+                           Margin="2.5,0,2.5,0"
+                           Style="{StaticResource ControllerInputPanel_TextBox}"/>
+               </Grid>
                <StackPanel Grid.Column="1"
                            Orientation="Horizontal">
                   <Button Content="Set"
                           Command="{Binding Set_Command}"
-                          Visibility="{Binding FCurr_Visibility}"
+                          Visibility="{Binding Set_Visibility}"
                           Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                   <Button Content="Media"
                           Command="{Binding Media_Command}"
+                          Visibility="{Binding Media_Visibility}"
                           Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                   <Button Content="Reset"
@@ -135,6 +152,8 @@
                                    Width="1*"/>
                <DataGridTextColumn Header="TWait" 
                                    Binding="{Binding sTWait}"
+                                   Visibility="{Binding DataContext.ColWait_Visibility,
+                                                        Source={x:Reference TFSEditorStackPanel}}"
                                    Width="1*"/>
                <DataGridTextColumn Header="FMin" 
                                    Binding="{Binding sFMin}"
@@ -181,6 +200,9 @@
                     Command="{Binding Extend_Command}"
                     Margin="2.5,0,2.5,0"
                     Style="{StaticResource ToolBar_TextButton}"/>
+            <CheckBox Content="Wait"
+                      IsChecked="{Binding bWaitingTime}"
+                      VerticalAlignment="Center"/>
          </StackPanel>
       </Grid>
    </Border>

Icarus/TSFEditor/TFSEditorVM.vb

@@ -16,6 +16,7 @@ Public Class TFSEditorVM
       HEIGHT = 1
       SECTIONCHANGE = 2
       SELECTION = 3
+      SELECTION_WAIT = 4
    End Enum
 
    Public Enum Filters As Integer
@@ -58,7 +59,7 @@ Public Class TFSEditorVM
       End Set
    End Property
 
-   Private m_MediaTypeList As New List(Of String)({"Slice Number", "Section change", "Selection"})
+   Private m_MediaTypeList As New List(Of String)({"Slice Number", "Section change", "Selection", "Selection Wait"})
    Public ReadOnly Property MediaTypeList As List(Of String)
       Get
          Return m_MediaTypeList
@@ -77,14 +78,30 @@ Public Class TFSEditorVM
                SetMediaHeightVisibility(True)
                SetFCurrVisibility(False)
                SetDifference_Visibility(False)
+               SetWaitVisibility(False)
+               SetSetVisibility(False)
+               SetMediaVisibility(True)
             Case MediaTypes.SECTIONCHANGE
                SetMediaHeightVisibility(False)
                SetFCurrVisibility(False)
                SetDifference_Visibility(True)
+               SetWaitVisibility(False)
+               SetSetVisibility(False)
+               SetMediaVisibility(True)
             Case MediaTypes.SELECTION
                SetMediaHeightVisibility(False)
                SetFCurrVisibility(True)
                SetDifference_Visibility(False)
+               SetWaitVisibility(False)
+               SetSetVisibility(True)
+               SetMediaVisibility(True)
+            Case MediaTypes.SELECTION_WAIT
+               SetMediaHeightVisibility(False)
+               SetFCurrVisibility(False)
+               SetDifference_Visibility(False)
+               SetWaitVisibility(True)
+               SetSetVisibility(True)
+               SetMediaVisibility(False)
          End Select
       End Set
    End Property
@@ -167,6 +184,54 @@ Public Class TFSEditorVM
       NotifyPropertyChanged(NameOf(FCurr_Visibility))
    End Sub
 
+   Private m_dWait As Double
+   Public Property sWait As String
+      Get
+         Return LenToString(m_dWait, 2)
+      End Get
+      Set(value As String)
+         Dim nNewValue As Integer = 0
+         If StringToLen(value, nNewValue) Then
+            m_dWait = nNewValue
+         Else
+            NotifyPropertyChanged(NameOf(sWait))
+         End If
+      End Set
+   End Property
+
+   Private m_Wait_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property Wait_Visibility As Visibility
+      Get
+         Return m_Wait_Visibility
+      End Get
+   End Property
+   Private Sub SetWaitVisibility(bValue As Boolean)
+      m_Wait_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(Wait_Visibility))
+   End Sub
+
+   Private m_Media_Visibility As Visibility = Visibility.Visible
+   Public ReadOnly Property Media_Visibility As Visibility
+      Get
+         Return m_Media_Visibility
+      End Get
+   End Property
+   Private Sub SetMediaVisibility(bValue As Boolean)
+      m_Media_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(Media_Visibility))
+   End Sub
+
+   Private m_Set_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property Set_Visibility As Visibility
+      Get
+         Return m_Set_Visibility
+      End Get
+   End Property
+   Private Sub SetSetVisibility(bValue As Boolean)
+      m_Set_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(Set_Visibility))
+   End Sub
+
    Private m_FilterList As New List(Of String)({"", "Time Lower", "Time Ok", "Time Upper", "Speed Min", "Speed Max"})
    Public ReadOnly Property FilterList As List(Of String)
       Get
@@ -208,6 +273,28 @@ Public Class TFSEditorVM
       NotifyPropertyChanged(NameOf(bTFSEditor_IsEnabled))
    End Sub
 
+   Private m_bWaitingTime As Boolean = False
+   Public Property bWaitingTime As Boolean
+      Get
+         Return m_bWaitingTime
+      End Get
+      Set(value As Boolean)
+         m_bWaitingTime = value
+         Dim nLayTFSCalcId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, LAY_TFSCALC)
+         If m_bWaitingTime Then
+            EgtSetInfo(nLayTFSCalcId, KEY_EMITWAITINGTIME, True)
+         Else
+            EgtRemoveInfo(nLayTFSCalcId, KEY_EMITWAITINGTIME)
+         End If
+         NotifyPropertyChanged(NameOf(ColWait_Visibility))
+      End Set
+   End Property
+   Public ReadOnly Property ColWait_Visibility As Visibility
+      Get
+         Return If(m_bWaitingTime, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    ' Definizione comandi
    Private m_cmdSet As ICommand
    Private m_cmdMedia As ICommand
@@ -332,12 +419,16 @@ Public Class TFSEditorVM
             For Each Layer In m_SelLayers
                Layer.SetFCurr(m_dFCurr)
             Next
+         Case MediaTypes.SELECTION_WAIT
+            For Each Layer In m_SelLayers
+               Layer.SetTWait(m_dWait)
+            Next
       End Select
-      ' salvo selezione corrente
-      Dim SelIndexList As New List(Of Integer)
-      For Each SelLayer In m_SelLayers
-         SelIndexList.Add(SelLayer.nIndex)
-      Next
+      '' salvo selezione corrente
+      'Dim SelIndexList As New List(Of Integer)
+      'For Each SelLayer In m_SelLayers
+      '   SelIndexList.Add(SelLayer.nIndex)
+      'Next
       '' ricalcolo valori
       'Map.refSliceManagerVM.CalcSlice(False, True)
       '' ripristino layer selezionati

Icarus/TopPanel/TopPanelVM.vb

@@ -277,7 +277,7 @@ Public Class TopPanelVM
          m_MachiningList.Remove(MachiningIndex.Empty())
       End If
       ' se nuova lavorazione e' none
-      If SelMachining.sGUID = Guid.Empty AndAlso Not MachiningList.Any(Function(x) x.sGUID = MachiningIndex.Empty.sGUID) Then
+      If Not IsNothing(m_SelMachining) AndAlso SelMachining.sGUID = Guid.Empty AndAlso Not MachiningList.Any(Function(x) x.sGUID = MachiningIndex.Empty.sGUID) Then
          ' aggiungo lavorazione vuota
          MachiningList.Insert(0, MachiningIndex.Empty())
       End If

Icarus/Utility/CurrentMachine.vb

@@ -42,6 +42,9 @@ Public Module CurrentMachine
          Return m_sMachiningFilePath
       End Get
    End Property
+   Friend Sub SetMachiningFilePath(sValue As String)
+      m_sMachiningFilePath = sValue
+   End Sub
    ' Cartella dei materiali
    Private m_sMaterialsFilePath As String = String.Empty
    Friend ReadOnly Property sMaterialsFilePath As String
@@ -126,8 +129,8 @@ Public Module CurrentMachine
       DisableMgr.ReEnable()
    End Sub
 
-   Friend Function ReadMachiningParamString(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String) As Integer
-      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, "", lpString, m_sMachiningFilePath)
+   Friend Function ReadMachiningParamString(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String, Optional sFilePath As String = "") As Integer
+      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, "", lpString, If(Not String.IsNullOrWhiteSpace(sFilePath), sFilePath, m_sMachiningFilePath))
       If Not String.IsNullOrWhiteSpace(lpString) Then
          lpString = EgwCrypto.PowerDecryptString(lpString, m_Salt)
       Else
@@ -136,8 +139,8 @@ Public Module CurrentMachine
       Return nResult
    End Function
 
-   Friend Function ReadMachiningParamSplit(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String) As Integer
-      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, "", lpString, m_sMachiningFilePath)
+   Friend Function ReadMachiningParamSplit(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String, Optional sFilePath As String = "") As Integer
+      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, "", lpString, If(Not String.IsNullOrWhiteSpace(sFilePath), sFilePath, m_sMachiningFilePath))
       If Not String.IsNullOrWhiteSpace(lpString) Then
          Dim Values() As String = lpString.Split(";"c)
          Dim sCryptoValues As String = ""
@@ -151,33 +154,33 @@ Public Module CurrentMachine
       Return nResult
    End Function
 
-   Friend Function ReadMachiningParamDouble(lpAppName As String, lpKeyName As String, dDefault As Double) As Double
+   Friend Function ReadMachiningParamDouble(lpAppName As String, lpKeyName As String, dDefault As Double, Optional sFilePath As String = "") As Double
       Dim sParam As String = ""
       Dim dParam As Double = dDefault
-      ReadMachiningParamString(lpAppName, lpKeyName, dDefault, sParam)
+      ReadMachiningParamString(lpAppName, lpKeyName, dDefault, sParam, sFilePath)
       StringToDouble(sParam, dParam)
       Return dParam
    End Function
 
-   Friend Function WriteMachiningParam(lpAppName As String, lpKeyName As String, lpString As String) As Boolean
-      Return WritePrivateProfileString(lpAppName, lpKeyName, EgwCrypto.PowerEncryptString(lpString, m_Salt), m_sMachiningFilePath)
+   Friend Function WriteMachiningParam(lpAppName As String, lpKeyName As String, lpString As String, Optional sFilePath As String = "") As Boolean
+      Return WritePrivateProfileString(lpAppName, lpKeyName, EgwCrypto.PowerEncryptString(lpString, m_Salt), If(Not String.IsNullOrWhiteSpace(sFilePath), sFilePath, m_sMachiningFilePath))
    End Function
 
-   Friend Function WriteMachiningParamSplit(lpAppName As String, lpKeyName As String, lpString As String) As Boolean
+   Friend Function WriteMachiningParamSplit(lpAppName As String, lpKeyName As String, lpString As String, Optional sFilePath As String = "") As Boolean
       If Not String.IsNullOrWhiteSpace(lpString) Then
          Dim Values() As String = lpString.Split(";"c)
          Dim sCryptoValues As String = ""
          For ValueIndex = 0 To Values.Count - 1
             sCryptoValues += EgwCrypto.PowerEncryptString(Values(ValueIndex), m_Salt) & If(ValueIndex < Values.Count - 1, ";", "")
          Next
-         Return WritePrivateProfileString(lpAppName, lpKeyName, sCryptoValues, m_sMachiningFilePath)
+         Return WritePrivateProfileString(lpAppName, lpKeyName, sCryptoValues, If(Not String.IsNullOrWhiteSpace(sFilePath), sFilePath, m_sMachiningFilePath))
       Else
          Return False
       End If
    End Function
 
-   Friend Function ReadMaterialParamString(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String) As Integer
-      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, lpDefault, lpString, m_sMaterialsFilePath)
+   Friend Function ReadMaterialParamString(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String, Optional sFilePath As String = "") As Integer
+      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, lpDefault, lpString, If(Not String.IsNullOrWhiteSpace(sFilePath), sFilePath, m_sMaterialsFilePath))
       If Not String.IsNullOrWhiteSpace(lpString) Then
          lpString = EgwCrypto.PowerDecryptString(lpString, m_Salt)
       Else
@@ -186,16 +189,16 @@ Public Module CurrentMachine
       Return nResult
    End Function
 
-   Friend Function ReadMaterialParamDouble(lpAppName As String, lpKeyName As String, dDefault As Double) As Double
+   Friend Function ReadMaterialParamDouble(lpAppName As String, lpKeyName As String, dDefault As Double, Optional sFilePath As String = "") As Double
       Dim sParam As String = ""
       Dim dParam As Double = dDefault
-      ReadMaterialParamString(lpAppName, lpKeyName, dDefault, sParam)
+      ReadMaterialParamString(lpAppName, lpKeyName, dDefault, sParam, sFilePath)
       StringToDouble(sParam, dParam)
       Return dParam
    End Function
 
-   Friend Function WriteMaterialParam(lpAppName As String, lpKeyName As String, lpString As String) As Boolean
-      Return WritePrivateProfileString(lpAppName, lpKeyName, EgwCrypto.PowerEncryptString(lpString, m_Salt), m_sMaterialsFilePath)
+   Friend Function WriteMaterialParam(lpAppName As String, lpKeyName As String, lpString As String, Optional sFilePath As String = "") As Boolean
+      Return WritePrivateProfileString(lpAppName, lpKeyName, EgwCrypto.PowerEncryptString(lpString, m_Salt), If(Not String.IsNullOrWhiteSpace(sFilePath), sFilePath, m_sMaterialsFilePath))
    End Function
 
 #End Region 'Methods

Icarus/Utility/GeomEntityColors.vb

@@ -1,57 +1,234 @@
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Module GeomEntityColors
 
+   Public Enum LayerType As Integer
+      PRINTPART = 1
+      RIBS = 2
+      SHELLNUMBERS = 3
+      AUXSOLIDS = 4
+      MACHSTART = 5
+      OTHERS = 6
+      ALL = 10
+   End Enum
+
    Private m_c3Print As Color3d
    Public ReadOnly Property c3Print As Color3d
       Get
-         Return m_c3Print
+         Dim c3Temp As Color3d
+         If Not GetMainPrivateProfileColor(S_COLORS, K_CLR_PRINTPART, c3Temp) Then
+            c3Temp.FromColor(System.Drawing.Color.Aqua)
+         End If
+         Return c3Temp
       End Get
    End Property
 
    Private m_c3MachStart As Color3d
    Public ReadOnly Property c3MachStart As Color3d
       Get
-         Return m_c3MachStart
+         Dim c3Temp As Color3d
+         If Not GetMainPrivateProfileColor(S_COLORS, K_CLR_MACHSTART, c3Temp) Then
+            c3Temp.FromColor(System.Drawing.Color.Red)
+         End If
+         Return c3Temp
       End Get
    End Property
 
    Private m_c3Rib As Color3d
    Public ReadOnly Property c3Rib As Color3d
       Get
-         Return m_c3Rib
+         Dim c3Temp As Color3d
+         If Not GetMainPrivateProfileColor(S_COLORS, K_CLR_RIBS, c3Temp) Then
+            c3Temp.FromColor(System.Drawing.Color.MediumOrchid)
+         End If
+         Return c3Temp
       End Get
    End Property
 
    Private m_c3ShellNumber As Color3d
    Public ReadOnly Property c3ShellNumber As Color3d
       Get
-         Return m_c3ShellNumber
+         Dim c3Temp As Color3d
+         If Not GetMainPrivateProfileColor(S_COLORS, K_CLR_SHELLNUMBERS, c3Temp) Then
+            c3Temp.FromColor(System.Drawing.Color.Lime)
+         End If
+         Return c3Temp
       End Get
    End Property
 
    Private m_c3AuxSolids As Color3d
    Public ReadOnly Property c3AuxSolids As Color3d
       Get
-         Return m_c3AuxSolids
+         Dim c3Temp As Color3d
+         If Not GetMainPrivateProfileColor(S_COLORS, K_CLR_AUXSOLIDS, c3Temp) Then
+            c3Temp.FromColor(System.Drawing.Color.DarkGoldenrod)
+         End If
+         Return c3Temp
       End Get
    End Property
 
    Private m_c3Others As Color3d
    Public ReadOnly Property c3Others As Color3d
       Get
-         Return m_c3Others
+         Dim c3Temp As Color3d
+         If Not GetMainPrivateProfileColor(S_COLORS, K_CLR_OTHERS, c3Temp) Then
+            c3Temp.FromColor(System.Drawing.Color.LightGray)
+         End If
+         Return c3Temp
       End Get
    End Property
 
    Sub New()
       ' imposto colori superfici
       m_c3Print.FromColor(System.Drawing.Color.Aqua)
+      GetMainPrivateProfileColor(S_COLORS, K_CLR_PRINTPART, m_c3Print)
       m_c3MachStart.FromColor(System.Drawing.Color.Red)
+      GetMainPrivateProfileColor(S_COLORS, K_CLR_MACHSTART, m_c3MachStart)
       m_c3Rib.FromColor(System.Drawing.Color.MediumOrchid)
+      GetMainPrivateProfileColor(S_COLORS, K_CLR_RIBS, m_c3Rib)
       m_c3ShellNumber.FromColor(System.Drawing.Color.Lime)
+      GetMainPrivateProfileColor(S_COLORS, K_CLR_SHELLNUMBERS, m_c3ShellNumber)
       m_c3AuxSolids.FromColor(System.Drawing.Color.DarkGoldenrod)
+      GetMainPrivateProfileColor(S_COLORS, K_CLR_AUXSOLIDS, m_c3AuxSolids)
       m_c3Others.FromColor(System.Drawing.Color.LightGray)
+      GetMainPrivateProfileColor(S_COLORS, K_CLR_OTHERS, m_c3Others)
+   End Sub
+
+   Friend Sub SetColor(Type As LayerType, c3Color As Color3d)
+      Dim c3Temp As Color3d
+      Dim sIniKey As String
+      Select Case Type
+         Case LayerType.PRINTPART
+            c3Temp = c3Print
+            sIniKey = K_CLR_PRINTPART
+         Case LayerType.RIBS
+            c3Temp = c3Rib
+            sIniKey = K_CLR_RIBS
+         Case LayerType.SHELLNUMBERS
+            c3Temp = c3ShellNumber
+            sIniKey = K_CLR_SHELLNUMBERS
+         Case LayerType.AUXSOLIDS
+            c3Temp = c3AuxSolids
+            sIniKey = K_CLR_AUXSOLIDS
+         Case LayerType.MACHSTART
+            c3Temp = c3MachStart
+            sIniKey = K_CLR_MACHSTART
+         Case LayerType.OTHERS
+            c3Temp = c3Others
+            sIniKey = K_CLR_OTHERS
+      End Select
+      c3Temp.R = c3Color.R
+      c3Temp.G = c3Color.G
+      c3Temp.B = c3Color.B
+      WritePrivateProfileColor(S_COLORS, sIniKey, c3Temp)
+      UpdateColors(Type)
+   End Sub
+   Friend Sub SetAlpha(Type As LayerType, dAlpha As Double)
+      Dim c3Temp As Color3d = c3Print
+      Dim sIniKey As String
+      Select Case Type
+         Case LayerType.PRINTPART
+            c3Temp = c3Print
+            sIniKey = K_CLR_PRINTPART
+         Case LayerType.RIBS
+            c3Temp = c3Rib
+            sIniKey = K_CLR_RIBS
+         Case LayerType.SHELLNUMBERS
+            c3Temp = c3ShellNumber
+            sIniKey = K_CLR_SHELLNUMBERS
+         Case LayerType.AUXSOLIDS
+            c3Temp = c3AuxSolids
+            sIniKey = K_CLR_AUXSOLIDS
+         Case LayerType.MACHSTART
+            c3Temp = c3MachStart
+            sIniKey = K_CLR_MACHSTART
+         Case LayerType.OTHERS
+            c3Temp = c3Others
+            sIniKey = K_CLR_OTHERS
+      End Select
+      c3Temp.A = dAlpha
+      WritePrivateProfileColor(S_COLORS, sIniKey, c3Temp)
+      UpdateColors(Type)
+   End Sub
+
+   Public Function WritePrivateProfileColor(IpAppName As String, IpKeyName As String, ByRef Color As Color3d) As Boolean
+      Dim sColor As String = Color.R & "," & Color.G & "," & Color.B & "," & Color.A
+      Return EgtUILib.WritePrivateProfileString(IpAppName, IpKeyName, sColor, m_sIniFile)
+   End Function
+
+   Sub UpdateColors(Type As LayerType)
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nIsOnTable As Integer = 0
+         If Not EgtGetInfo(nPartId, "PartOnTable", nIsOnTable) OrElse nIsOnTable <> 1 Then
+            nPartId = EgtGetNextPart(nPartId)
+            Continue While
+         End If
+         ' Disabilito segnalazione modificato
+         Dim DisableMgr As New DisableModifiedMgr
+         ' rimuovo eventuali colori da entita' e li assegno ai layer
+         If Type = LayerType.PRINTPART OrElse Type = LayerType.ALL Then
+            Dim nPrintPartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, PRINT_SOLID)
+            Dim nPrintPartEntityId = EgtGetFirstInGroup(nPrintPartLayerId)
+            While nPrintPartEntityId <> GDB_ID.NULL
+               EgtResetColor(nPrintPartEntityId)
+               nPrintPartEntityId = EgtGetNext(nPrintPartEntityId)
+            End While
+            EgtSetColor(nPrintPartLayerId, GeomEntityColors.c3Print)
+         End If
+         If Type = LayerType.RIBS OrElse Type = LayerType.ALL Then
+            Dim nRibsLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_RIBS)
+            Dim nRibsEntityId = EgtGetFirstInGroup(nRibsLayerId)
+            While nRibsEntityId <> GDB_ID.NULL
+               EgtResetColor(nRibsEntityId)
+               nRibsEntityId = EgtGetNext(nRibsEntityId)
+            End While
+            EgtSetColor(nRibsLayerId, GeomEntityColors.c3Rib)
+         End If
+         If Type = LayerType.SHELLNUMBERS OrElse Type = LayerType.ALL Then
+            Dim nShellNumberLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_SHELL_NBR)
+            Dim nShellNumberEntityId = EgtGetFirstInGroup(nShellNumberLayerId)
+            While nShellNumberEntityId <> GDB_ID.NULL
+               EgtResetColor(nShellNumberEntityId)
+               nShellNumberEntityId = EgtGetNext(nShellNumberEntityId)
+            End While
+            EgtSetColor(nShellNumberLayerId, GeomEntityColors.c3ShellNumber)
+         End If
+         If Type = LayerType.AUXSOLIDS OrElse Type = LayerType.ALL Then
+            Dim nAuxSolidsLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_AUX_SOLIDS)
+            Dim nAuxSolidsEntityId = EgtGetFirstInGroup(nAuxSolidsLayerId)
+            While nAuxSolidsEntityId <> GDB_ID.NULL
+               EgtResetColor(nAuxSolidsEntityId)
+               nAuxSolidsEntityId = EgtGetNext(nAuxSolidsEntityId)
+            End While
+            EgtSetColor(nAuxSolidsLayerId, GeomEntityColors.c3AuxSolids)
+         End If
+         If Type = LayerType.MACHSTART OrElse Type = LayerType.ALL Then
+            Dim nMachStartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_MACH_START)
+            Dim nMachStartEntityId = EgtGetFirstInGroup(nMachStartLayerId)
+            While nMachStartEntityId <> GDB_ID.NULL
+               EgtResetColor(nMachStartEntityId)
+               nMachStartEntityId = EgtGetNext(nMachStartEntityId)
+            End While
+            EgtSetColor(nMachStartLayerId, GeomEntityColors.c3MachStart)
+         End If
+         If Type = LayerType.OTHERS OrElse Type = LayerType.ALL Then
+            Dim nOthersLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_OTHERS)
+            Dim nOthersEntityId = EgtGetFirstInGroup(nOthersLayerId)
+            While nOthersEntityId <> GDB_ID.NULL
+               EgtResetColor(nOthersEntityId)
+               nOthersEntityId = EgtGetNext(nOthersEntityId)
+            End While
+            EgtSetColor(nOthersLayerId, GeomEntityColors.c3Others)
+         End If
+
+         ' Ripristino stato segnalazione modifica
+         DisableMgr.ReEnable()
+
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
    End Sub
 
 End Module

Icarus/Utility/LuaExec.vb

@@ -69,7 +69,8 @@ Module LuaExec
       Dim sIsoFilePath As String = ""
       Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
       If nTabPartId <> GDB_ID.NULL Then
-         If Not EgtGetInfo(nTabPartId, KEY_ISOFILE_PATH, sIsoFilePath) Then
+         If Not EgtGetInfo(nTabPartId, KEY_ISOFILE_PATH, sIsoFilePath) OrElse
+            Not IO.Directory.Exists( IO.Path.GetDirectoryName(sIsoFilePath)) Then
             EgtGetCurrFilePath(sIsoFilePath)
             Dim sExtension As String = ""
             GetPrivateProfileString(S_PARTPROGRAM, K_EXTENSION, "", sExtension, CurrentMachine.sMachIniFile)

Icarus/ViewLayerManager/ViewLayerManagerVM.vb

@@ -56,7 +56,7 @@ Public Class ViewLayerManagerVM
             WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, "0")
          ElseIf Map.refTopPanelVM.SelPage = Pages.SLICE Then
             WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, "0")
-         ElseIf Map.refTopPanelVM.SelPage = Pages.NULL then
+         ElseIf Map.refTopPanelVM.SelPage = Pages.NULL Then
             WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, "0")
             WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, "0")
          End If
@@ -229,6 +229,23 @@ Public Class ViewLayer
                EgtSetStatus(CurrPart.nOthersLayerId, Status)
          End Select
       Next
+      '' se sono in importazione, dis/attivo anche queste superfici
+      'If Map.refTopPanelVM.SelPage = Pages.IMPORT Then
+      '   For Each CurrPart In Map.refManagePartPanelVM.ManagerPartList
+      '      For Each Layer In CurrPart.LayerList
+      '         If (Layer.Type = ManagePart_Layer.LayerType.PRINT_SOLID AndAlso m_Type = ViewLayerType.PRINT_SOLID) OrElse
+      '            (Layer.Type = ManagePart_Layer.LayerType.MACH_START AndAlso m_Type = ViewLayerType.START_MACHINING) OrElse
+      '            (Layer.Type = ManagePart_Layer.LayerType.RIBS AndAlso m_Type = ViewLayerType.RIBS) OrElse
+      '            (Layer.Type = ManagePart_Layer.LayerType.SHELL_NUMBER AndAlso m_Type = ViewLayerType.SHELL_NUMBER) OrElse
+      '            (Layer.Type = ManagePart_Layer.LayerType.AUX_SOLIDS AndAlso m_Type = ViewLayerType.AUX_SOLIDS) OrElse
+      '            (Layer.Type = ManagePart_Layer.LayerType.OTHERS AndAlso m_Type = ViewLayerType.OTHERS) Then
+      '            For Each Entity In Layer.EntityList
+      '               EgtSetStatus(Entity.nId, Status)
+      '            Next
+      '         End If
+      '      Next
+      '   Next
+      'End If
       ' Ripristino stato segnalazione modifica
       DisableMgr.ReEnable()
    End Sub