Imports EgtBEAMWALL.Core
Imports EgtUILib
Imports EgtWPFLib5

Public Class BTLParamVM
   Inherits VMBase

   Protected m_BTLParamM As BTLParamM
   Public ReadOnly Property BTLParamM As BTLParamM
      Get
         Return m_BTLParamM
      End Get
   End Property

   Private m_BTLFeatureM As BTLFeatureM

   Public ReadOnly Property bIsP As Boolean
      Get
         Return m_BTLParamM.bIsP
      End Get
   End Property

   Public Property bIsModified As Boolean
      Get
         Return m_BTLParamM.bIsModified
      End Get
      Set(value As Boolean)
         m_BTLParamM.bIsModified = value
      End Set
   End Property

   Public ReadOnly Property Custom_Visibility As Visibility
      Get
         If bIsP Then
            Return Visibility.Collapsed
         Else
            Return Visibility.Visible
         End If
      End Get
   End Property

   ' parametri da struttura
   Public Property sName As String
      Get
         Return m_BTLParamM.sName
      End Get
      Set(value As String)
         m_BTLParamM.sName = value
      End Set
   End Property

   Public ReadOnly Property nId As Integer
      Get
         Return m_BTLParamM.nId
      End Get
   End Property

   Public Property sDescription As String
      Get
         Return m_BTLParamM.sDescription
      End Get
      Set(value As String)
         m_BTLParamM.sDescription = value
      End Set
   End Property

   Public ReadOnly Property sMin As String
      Get
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_
               Return DoubleToString(m_BTLParamM.dMin, 3)
            Case BTLParamType.LENGTH
               Return LenToString(m_BTLParamM.dMin, 3)
            Case Else
               Return ""
         End Select
      End Get
   End Property

   Public ReadOnly Property dMin As Double
      Get
         Return m_BTLParamM.dMin
      End Get
   End Property

   Public ReadOnly Property sMax As String
      Get
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_
               Return DoubleToString(m_BTLParamM.dMax, 3)
            Case BTLParamType.LENGTH
               Return LenToString(m_BTLParamM.dMax, 3)
            Case Else
               Return ""
         End Select
      End Get
   End Property

   Public ReadOnly Property dMax As Double
      Get
         Return m_BTLParamM.dMax
      End Get
   End Property

   ' parametri da geometria
   Public Property sValue As String
      Get
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_
               Return DoubleToString(m_BTLParamM.dValue, 3)
            Case BTLParamType.LENGTH
               Return LenToString(m_BTLParamM.dValue, 3)
            Case Else      ' stringhe
               Return m_BTLParamM.sValue
         End Select
         Return If(m_BTLParamM.nType = BTLParamType.LENGTH, LenToString(m_BTLParamM.dValue, 3), DoubleToString(m_BTLParamM.dValue, 3))
      End Get
      Set(value As String)
         Dim dNewValue As Double
         ' trasformo valori
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_
               StringToDoubleAdv(value, dNewValue, True)
            Case BTLParamType.LENGTH
               StringToLenAdv(value, dNewValue, True)
            Case Else
               ' per string non faccio nulla
         End Select
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
               ' verifico che sia compreso tra minimo e massimo
               If dNewValue < m_BTLParamM.dMin OrElse dNewValue > m_BTLParamM.dMax Then
                  MessageBox.Show(EgtMsg(61856), EgtMsg(30007))
                  NotifyPropertyChanged(NameOf(sValue))
                  Return
               End If
               ' recupero ParentPart
               Dim ParentPart As BTLPartM = TryCast(m_BTLParamM.ParentFeature.ParentPart, BTLPartM)
               ' recupero PartId
               Dim nPartId As Integer = ParentPart.nPartId
               ' numero di pezzi inseriti nelle barre 
               Dim INPROD As Integer = 0
               EgtDuploInRawCount(nPartId, INPROD)
               ' recupero pezzi lavorati da Db
               Dim nDoneCnt As Integer = DbControllers.m_ProjController.getCountItemState(ProjectManagerVM.CurrProj.nProjId, nPartId, ItemState.Assigned)
               ' controllo se i pezzi sono lavorati se si messaggio di warning altrimenti messaggio informativo
               If nDoneCnt > 0 Then
                  MessageBox.Show("Pezzo " & nPartId & " non modificato in " & INPROD & " barra/e perche' settata/e come da produrre", EgtMsg(30009), MessageBoxButton.OK, MessageBoxImage.Warning)
               ElseIf INPROD > 0 Then
                  MessageBox.Show("Pezzo " & nPartId & " modificato in " & INPROD & " barra/e grezza/e", EgtMsg(30009), MessageBoxButton.OK, MessageBoxImage.Information)
               End If
               UpdateParamValue(dNewValue, "")
            Case Else
               UpdateParamValue(0, value)
         End Select
         NotifyPropertyChanged(NameOf(bCustom))
      End Set
   End Property
   Public Property dValue As Double
      Get
         Return m_BTLParamM.dValue
      End Get
      Set(value As Double)
         m_BTLParamM.dValue = value
         NotifyPropertyChanged(NameOf(sValue))
      End Set
   End Property

   Public Property sDefault As String
      Get
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_
               Return DoubleToString(m_BTLParamM.dDefault, 3)
            Case BTLParamType.LENGTH
               Return LenToString(m_BTLParamM.dDefault, 3)
            Case Else
               Return ""
         End Select
      End Get
      Set(value As String)
         Dim dNewValue As Double
         ' trasformo valori
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_
               StringToDoubleAdv(value, dNewValue, True)
            Case BTLParamType.LENGTH
               StringToLenAdv(value, dNewValue, True)
            Case Else
               ' per string non faccio nulla
         End Select
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
               ' verifico che sia compreso tra minimo e massimo
               If dNewValue < m_BTLParamM.dMin OrElse dNewValue > m_BTLParamM.dMax Then
                  MessageBox.Show(EgtMsg(61856), EgtMsg(30007))
                  NotifyPropertyChanged(NameOf(sDefault))
                  Return
               End If
               m_BTLParamM.dDefault = dNewValue
               m_BTLParamM.bIsModified = True
            Case Else
               m_BTLParamM.dDefault = 0
               m_BTLParamM.bIsModified = True
         End Select
      End Set
   End Property

   Public ReadOnly Property nType As BTLParamType
      Get
         Return m_BTLParamM.nType
      End Get
   End Property

   Protected m_sDrawPath As String
   Public ReadOnly Property sDrawPath As String
      Get
         Return Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Parameters\" & m_BTLFeatureM.sDescGRP & "_" & m_BTLParamM.sName & "_" & m_BTLFeatureM.nSelGRP & ".gif"
      End Get
   End Property

   Public Property bCustom As Boolean
      Get
         Return m_BTLParamM.bCustom
      End Get
      Set(value As Boolean)
         ' Se de-checko il parametro settiamo il suo valore a quello di default
         Dim bFound As Boolean = False
         If Not value Then
            ' Cerco il parametro Q direttamente nel file ini
            Dim ParamIndex As String = 1
            Dim NewBTLParam As BTLParamM = Nothing
            While BTLIniFile.GetBeamPrivateProfileParam(Me.m_BTLFeatureM.nSelGRP, Me.m_BTLFeatureM.nPRC, Me.m_BTLFeatureM.nSelVARIANT, False, ParamIndex, Nothing, NewBTLParam)
               Dim QBTLParam As BTLParamVM = New BTLParamVM(NewBTLParam)
               If QBTLParam.sName = Me.sName Then
                  Me.sValue = QBTLParam.sDefault
                  NotifyPropertyChanged(NameOf(sValue))
                  m_BTLParamM.bCustom = value
                  ' setto nel DB che il parametro attuale è custom o meno
                  EgtSetInfo(m_BTLFeatureM.nFeatureId, m_BTLParamM.sName & "A", If(value, "1", ""))
                  NotifyPropertyChanged(NameOf(bCustom))
                  Exit While
               End If
               ParamIndex += 1
            End While
         End If
      End Set
   End Property

   Public ReadOnly Property sBWType As String
      Get
         Return m_BTLParamM.sBWType
      End Get
   End Property

#Region "CONSTRUCTOR"

   Sub New(BTLParamM As BTLParamM, BTLFeatureM As BTLFeatureM)
      m_BTLParamM = BTLParamM
      m_BTLFeatureM = BTLFeatureM
   End Sub

   Sub New(BTLParamM As BTLParamM)
      m_BTLParamM = BTLParamM
      m_BTLFeatureM = Nothing
   End Sub

#End Region    ' CONSTRUCTOR

   Friend Sub UpdateParamValue(dNewValue As Double, sNewValue As String, Optional bDraw As Boolean = True)
      ' verifico se solido attivo
      Dim bShowSolid As Boolean = Map.refShowBeamPanelVM.ShowSolid_IsChecked
      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
      ' Recupero i parametri attuali della feature
      Dim vPar() As Double = Nothing
      Dim sPar As String = String.Empty
      Dim vParQ() As String = Nothing
      m_BTLFeatureM.CalcParamArray(vPar, sPar, vParQ)
      ' se P
      If m_BTLParamM.bIsP Then
         ' modifico parametro cambiato con value
         Select Case m_BTLParamM.nType
            Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
               vPar(m_BTLParamM.nId - 1) = dNewValue
            Case BTLParamType.STRING_
               sPar = sNewValue
         End Select
         Dim bOK As Boolean = m_BTLFeatureM.UpdateParams(m_BTLFeatureM.nSelGRP, m_BTLFeatureM.nPRC, m_BTLFeatureM.nSelSIDE, m_BTLFeatureM.sDES,
                                                         m_BTLFeatureM.nPRID, m_BTLFeatureM.frFRAME, vPar, sPar, vParQ)
         If bOK Then
            Select Case m_BTLParamM.nType
               Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
                  m_BTLParamM.dValue = dNewValue
                  NotifyPropertyChanged(NameOf(sValue))
               Case BTLParamType.STRING_
                  m_BTLParamM.sValue = sNewValue
                  NotifyPropertyChanged(NameOf(sValue))
            End Select
         Else
            NotifyPropertyChanged(NameOf(sValue))
         End If
         ' se Q
      Else
         For Ind = 0 To vParQ.Length() - 1
            If vParQ(Ind).StartsWith(m_BTLParamM.sName) Then
               vParQ(Ind) = m_BTLParamM.sName & ":" & DoubleToString(dNewValue, 3)
            End If
         Next
         Dim bOK As Boolean = m_BTLFeatureM.UpdateParams(m_BTLFeatureM.nSelGRP, m_BTLFeatureM.nPRC, m_BTLFeatureM.nSelSIDE, m_BTLFeatureM.sDES,
                                                         m_BTLFeatureM.nPRID, m_BTLFeatureM.frFRAME, vPar, sPar, vParQ)

         If bOK Then
            m_BTLParamM.bCustom = True
            ' se sono in ottimizzazione 
            If Map.refMainMenuVM.SelPage = Pages.VIEW Then
               ' setto nel progetto il fatto che il parametro attuale è custom o meno
               EgtSetInfo(m_BTLFeatureM.nFeatureId, m_BTLParamM.sName & "A", If(bCustom, "1", ""))
               NotifyPropertyChanged(NameOf(bCustom))
            End If
            m_BTLParamM.dValue = dNewValue
            ' modifica provvisoria per mancanza aggiornamento su freecontour
            If m_BTLFeatureM.IsFreeContour Then
               EgtSetInfo(m_BTLFeatureM.nFeatureId, sName, dNewValue)
            End If
            NotifyPropertyChanged(NameOf(dValue))
         Else
            NotifyPropertyChanged(NameOf(dValue))
         End If
      End If

      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
      If bDraw Then EgtDraw()
   End Sub

End Class