Imports System.Collections.ObjectModel
Imports EgtBEAMWALL.Core
Imports EgtUILib
Imports EgtWPFLib5
Imports System.IO

Public Class LeftPanelVM
   Inherits VMBase

#Region "FIELDS & PROPERTIES"

   Private Property m_GridDims As New ObservableCollection(Of GridDimension)
   Public Property GridDims As ObservableCollection(Of GridDimension)
      Get
         Return m_GridDims
      End Get
      Set
         m_GridDims = Value
         NotifyPropertyChanged(NameOf(GridDims))
      End Set
   End Property

   Private m_LeftPanel_IsEnabled As Boolean = True
   Public ReadOnly Property LeftPanel_IsEnabled As Boolean
      Get
         Return m_LeftPanel_IsEnabled
      End Get
   End Property

   Public ReadOnly Property SearchFilter_IsEnabled As Boolean
      Get
         Return Not Map.refFreeContourManagerVM.bIsActive
      End Get
   End Property

   Private m_Parameters_IsEnabled As Boolean = False
   Public ReadOnly Property Parameters_IsEnabled As Boolean
      Get
         Return m_Parameters_IsEnabled
      End Get
   End Property
   Friend Sub SetParametersIsEnabled(bIsEnabled As Boolean)
      m_Parameters_IsEnabled = bIsEnabled
      NotifyPropertyChanged(NameOf(Parameters_IsEnabled))
   End Sub

   Private m_Data_IsEnabled As Boolean = False
   Public ReadOnly Property Data_IsEnabled As Boolean
      Get
         Return m_Data_IsEnabled
      End Get
   End Property
   Friend Sub SetData_IsEnabled(bIsEnabled As Boolean)
      m_Data_IsEnabled = bIsEnabled
      NotifyPropertyChanged(NameOf(Data_IsEnabled))
   End Sub

   Private m_OnlyProdPartManagerVisibility As Visibility = Visibility.Collapsed
   Public ReadOnly Property OnlyProdPartManagerVisibility As Visibility
      Get
         Return m_OnlyProdPartManagerVisibility
      End Get
   End Property
   Friend Sub SetOnlyProdPartManager_Visibility(value As Visibility)
      m_OnlyProdPartManagerVisibility = value
      NotifyPropertyChanged(NameOf(OnlyProdPartManagerVisibility))
   End Sub

   Private m_IsFilterBtnOpen As Boolean = False
   Public Property IsFilterBtnOpen As Boolean
      Get
         Return m_IsFilterBtnOpen
      End Get
      Set(value As Boolean)
         m_IsFilterBtnOpen = value
      End Set
   End Property
   Friend Sub SetIsFilterBtnOpen(bIsFilterBtnOpen As Boolean)
      m_IsFilterBtnOpen = bIsFilterBtnOpen
      NotifyPropertyChanged(NameOf(IsFilterBtnOpen))
   End Sub


   ' Definizione comandi
   Private m_cmdData As ICommand
   Private m_cmdParameter As ICommand
   Private m_cmdVerifyAll As ICommand
   Private m_cmdShowPopUpFilterBtnCmd As ICommand
   Private m_cmdBackRotation As ICommand
   Private m_cmdInvert As ICommand

#Region "Messages"

   Public ReadOnly Property SearchFilter_Msg As String
      Get
         Return EgtMsg(61949)
      End Get
   End Property

   Public ReadOnly Property Section_Msg As String
      Get
         Return EgtMsg(61771)
      End Get
   End Property

   Public ReadOnly Property Group_Msg As String
      Get
         Return EgtMsg(61624)
      End Get
   End Property
   Public ReadOnly Property SubGroup_Msg As String
      Get
         Return EgtMsg(61623)
      End Get
   End Property

   Public ReadOnly Property ParType_Msg As String
      Get
         Return EgtMsg(61950)
      End Get
   End Property

   Public ReadOnly Property ParValue_Msg As String
      Get
         Return EgtMsg(61951)
      End Get
   End Property

   Public ReadOnly Property Pdn_Msg As String
      Get
         Return EgtMsg(61809)
      End Get
   End Property

   Public ReadOnly Property Description_Msg As String
      Get
         Return EgtMsg(62511)
      End Get
   End Property

   Public ReadOnly Property Data_ToolTip As String
      Get
         Return EgtMsg(61897)
      End Get
   End Property

   Public ReadOnly Property Parameters_ToolTip As String
      Get
         Return EgtMsg(61898)
      End Get
   End Property

   Public ReadOnly Property VerifyAll_ToolTip As String
      Get
         Return EgtMsg(61928)
      End Get
   End Property

#End Region    ' Messages

#End Region    'FIELDS & PROPERTIES

#Region "CONSTRUCTOR"

   Sub New()
      ' imposto riferimento su mappa
      Map.SetRefLeftPanelVM(Me)
      ' imposto dimensioni colonne/righe della Grid
      DimensionsIniFile.ReadGridDimensions(ConstDims.LEFTPANEL_VIEW, GridDims)
   End Sub

#End Region    ' Constructor

#Region "METHODS"

   Friend Sub SetLeftPanelIsEnabled(bIsEnabled As Boolean)
      m_LeftPanel_IsEnabled = bIsEnabled
      NotifyPropertyChanged(NameOf(LeftPanel_IsEnabled))
      NotifyPropertyChanged(NameOf(SearchFilter_IsEnabled))
   End Sub

   ' funzione che gestisce risposta da thread di verifica, aggiorna progress e segnala comando di interruzione
   Private Sub ManageCalc(dProgress As Double, sProgress As String, ByRef bCancel As Boolean)
      If dProgress = 0 Then
         Map.refMyStatusBarVM.SetLoadingProgress_Visibility(True)
         Map.refMyStatusBarVM.SetStopProgress_IsActive(True)
         Map.refMyStatusBarVM.SetStopProgress_IsEnabled(True)
         Map.refMyStatusBarVM.SetOutputMessage(sProgress)
         Map.refMyStatusBarVM.SetStopProgress_IsActive(True)
         Map.refMyStatusBarVM.SetStopProgress_IsEnabled(True)
      ElseIf dProgress = 1 Then
         Map.refMyStatusBarVM.SetLoadingProgress_Visibility(False)
         Map.refMyStatusBarVM.SetStopProgress_IsActive(False)
         Map.refMyStatusBarVM.SetStopProgress_IsEnabled(False)
         Map.refMyStatusBarVM.SetOutputMessage(sProgress, 3)
      End If
      bCancel = Map.refMyStatusBarVM.bStopProgress
      Map.refMyStatusBarVM.SetLoadingProgress(dProgress * 100)
      Map.refMyStatusBarVM.SetOutputMessage(sProgress)
   End Sub

#End Region    ' METHODS

#Region "COMMANDS"

#Region "Data"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property Data_Command As ICommand
      Get
         If m_cmdData Is Nothing Then
            m_cmdData = New Command(AddressOf Data)
         End If
         Return m_cmdData
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Data()
      Dim BTLDataWnd As New BTLDataWndV(Application.Current.MainWindow, New BTLDataWndVM())
      BTLDataWnd.ShowDialog()
   End Sub

#End Region ' Data

#Region "Parameter"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property Parameter_Command As ICommand
      Get
         If m_cmdParameter Is Nothing Then
            m_cmdParameter = New Command(AddressOf Parameter)
         End If
         Return m_cmdParameter
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Parameter()
      Dim PartParametersWnd As New PartParametersWndV(Application.Current.MainWindow, New PartParametersWndVM())
      PartParametersWnd.ShowDialog()
   End Sub

#End Region ' Parameter

#Region "VerifyAll"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property VerifyAll_Command As ICommand
      Get
         If m_cmdVerifyAll Is Nothing Then
            m_cmdVerifyAll = New Command(AddressOf VerifyAll)
         End If
         Return m_cmdVerifyAll
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub VerifyAll()
      If (Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso (IsNothing(ProjectManagerVM.CurrProj) OrElse IsNothing(Map.refProjectVM.BTLStructureVM))) OrElse
         (Map.refMainMenuVM.SelPage = Pages.MACHINING AndAlso (IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.MachGroupPanelVM))) OrElse
         (Map.refMainMenuVM.SelPage = Pages.ONLYPRODPAGE AndAlso (IsNothing(ProjectManagerVM.CurrProj) OrElse IsNothing(Map.refProjectVM.BTLStructureVM)) AndAlso (IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.MachGroupPanelVM))) Then Return
      ' se modalita' assemblato
      Configuration.AssembledMode(Map.refShowBeamPanelVM.ShowBuilding_IsChecked)
      Dim BarList() As EgtBEAMWALL.Core.Bar = Nothing
      Dim ProjType As BWType
      If Map.refMainMenuVM.SelPage = Pages.VIEW Then
         ProjType = ProjectManagerVM.CurrProj.nType
         If Not CreateBarListToVerify(Pages.VIEW, ProjType, BarList) Then Return
         ' lancio calcolo
         EgtBEAMWALL.Core.CalcIntegration.Run(BarList, ProjectManagerVM.CurrProj.sProjDirPath, AddressOf ManageCalc)
      ElseIf Map.refMainMenuVM.SelPage = Pages.MACHINING Then
         ProjType = ProjectManagerVM.CurrProd.nType
         If Not CreateBarListToVerify(Pages.MACHINING, ProjType, BarList) Then Return
         ' lancio calcolo
         EgtBEAMWALL.Core.CalcIntegration.Run(BarList, ProjectManagerVM.CurrProd.sProdDirPath, AddressOf ManageCalc)
      ElseIf Map.refMainMenuVM.SelPage = Pages.ONLYPRODPAGE Then
         ProjType = ProjectManagerVM.CurrProd.nType
         If Map.refProjectVM.LastSelGridType = ProjectVM.GridSelTypes.PART OrElse Map.refProjectVM.LastSelGridType = ProjectVM.GridSelTypes.PARTLIST Then
            If Not CreateBarListToVerify(Pages.VIEW, ProjType, BarList) Then Return
            ' lancio calcolo
            EgtBEAMWALL.Core.CalcIntegration.Run(BarList, ProjectManagerVM.CurrProj.sProjDirPath, AddressOf ManageCalc)
         ElseIf Map.refProjectVM.LastSelGridType = ProjectVM.GridSelTypes.MACHGROUP Then
            If Not CreateBarListToVerify(Pages.MACHINING, ProjType, BarList) Then Return
            ' lancio calcolo
            EgtBEAMWALL.Core.CalcIntegration.Run(BarList, ProjectManagerVM.CurrProd.sProdDirPath, AddressOf ManageCalc)
         End If
      End If
   End Sub

   Private Function CreateBarListToVerify(SelPage As Pages, ProjType As BWType, ByRef BarList As Bar()) As Boolean
      If SelPage = Pages.VIEW Then
         Dim TempBarList As New List(Of EgtBEAMWALL.Core.Bar)
         For PartIndex = 0 To Map.refProjectVM.BTLStructureVM.BTLPartVMList.Count - 1
            Dim CurrPart As BTLPartVM = Map.refProjectVM.BTLStructureVM.BTLPartVMList(PartIndex)
            If Not CurrPart.bDO Then Continue For
            Dim Bar As New EgtBEAMWALL.Core.Bar With {.nBarId = CurrPart.nPartId,
                                                     .nProgramPage = ProjectType.PROJ,
                                                     .nProjType = ProjType,
                                                     .bBarOk = True,
                                                     .nMachineName = Map.refMachinePanelVM.SelectedMachine.Name,
                                                     .nGlobState = CurrPart.nGlobalState}
            Select Case CurrPart.nGlobalState
               Case Core.CalcStates.OK, CalcStates.INFO
                  Bar.nCmdType = CalcIntegration.CmdTypes.GENERATE
               Case Else
                  If CurrPart.nGlobalState = CalcStates.NOTCALCULATED OrElse CurrPart.nFeaturesGlobalState > CalcStates.INFO Then
                     Dim sBTLPartFilePath As String = ProjectManagerVM.CurrProj.sProjDirPath & "\" & CurrPart.nPDN.ToString() & ".ori.bwe"
                     If File.Exists(sBTLPartFilePath) Then File.Delete(sBTLPartFilePath)
                  End If
                  Bar.nCmdType = CalcIntegration.CmdTypes.CHECKGEN
            End Select
            TempBarList.Add(Bar)
         Next
         BarList = TempBarList.ToArray()
         ' disabilito interfaccia
         Map.refProjectVM.SetCalcRunning(True)
      ElseIf SelPage = Pages.MACHINING Then
         Dim TempBarList As New List(Of EgtBEAMWALL.Core.Bar)
         For PartIndex = 0 To Map.refMachGroupPanelVM.MachGroupVMList.Count - 1
            Dim CurrMachGroup As MyMachGroupVM = Map.refMachGroupPanelVM.MachGroupVMList(PartIndex)
            ' se e' gia' stato assegnato a supervisor, la salto e vado alla prossima barra
            If CurrMachGroup.nProduction_State >= ItemState.Assigned Then Continue For
            Dim MachineName As String = ""
            EgtGetMachGroupMachineName(CurrMachGroup.Id, MachineName)
            Dim Bar As New EgtBEAMWALL.Core.Bar With {.nBarId = CurrMachGroup.Id,
                                                      .nProgramPage = ProjectType.PROD,
                                                      .nProjType = ProjType,
                                                      .bBarOk = True,
                                                      .nMachineName = MachineName,
                                                      .nGlobState = CurrMachGroup.nGlobalState}
            Select Case CurrMachGroup.nGlobalState
               Case Core.CalcStates.OK, CalcStates.INFO
                  Bar.nCmdType = CalcIntegration.CmdTypes.GENERATE
               Case Else
                  If CurrMachGroup.nGlobalState = CalcStates.NOTCALCULATED OrElse (CurrMachGroup.nPartsGlobalState > CalcStates.INFO) Then
                     Dim sMachGroupFilePath As String = ProjectManagerVM.CurrProd.sProdDirPath & "\" & CurrMachGroup.Name.ToString() & ".ori.bwe"
                     If File.Exists(sMachGroupFilePath) Then File.Delete(sMachGroupFilePath)
                  End If
                  Bar.nCmdType = CalcIntegration.CmdTypes.CHECKGEN
            End Select
            TempBarList.Add(Bar)
         Next
         If TempBarList.Count = 0 Then Return False
         BarList = TempBarList.ToArray()
         ' disabilito interfaccia
         Map.refProjectVM.SetCalcRunning(True)
      End If
      Return True
   End Function

#End Region ' VerifyAll

#Region "ShowPopUpFilterBtnCommand"

   Public ReadOnly Property ShowPopUpFilterBtnCommand As ICommand
      Get
         If m_cmdShowPopUpFilterBtnCmd Is Nothing Then
            m_cmdShowPopUpFilterBtnCmd = New Command(AddressOf ShowPopUpFilterBtn)
         End If
         Return m_cmdShowPopUpFilterBtnCmd
      End Get
   End Property

   Public Sub ShowPopUpFilterBtn(ByVal param As Object)
      If m_IsFilterBtnOpen Then
         SetIsFilterBtnOpen(False)
      Else
         SetIsFilterBtnOpen(True)
      End If
   End Sub

#End Region    ' ShowPopUpFilterBtnCommand

#Region "BackRotation"

   ''' <summary>
   ''' Returns a command that do Exec.
   ''' </summary>
   Public ReadOnly Property BackRotation_Command As ICommand
      Get
         If m_cmdBackRotation Is Nothing Then
            m_cmdBackRotation = New Command(AddressOf BackRotation)
         End If
         Return m_cmdBackRotation
      End Get
   End Property

   ''' <summary>
   ''' Execute the Exec.  This method is invoked by the ExecCommand.
   ''' </summary>
   Public Sub BackRotation()
      If IsNothing(ProjectManagerVM.CurrProj) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) Then Return
      ' salvo sezione impostata
      Dim CurrSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SelSection
      ' se modalita' assemblato
      Dim bShowBuilding As Boolean = Map.refShowBeamPanelVM.ShowBuilding_IsChecked
      Configuration.AssembledMode(bShowBuilding)
      ' ruoto i pezzi selezionati
      For Each Part In Map.refProjectVM.BTLStructureVM.SelBTLParts
         Part.BackRotation(False, False)
      Next
      ' se assemblato lo ripristino
      If bShowBuilding Then Map.refProjectVM.BTLStructureVM.ShowBuilding(True, False)
      ' se progetto travi e sezione precedente diversa da vuota (tutti i pezzi)
      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM AndAlso CurrSection <> SectionXMaterial.Empty Then
         ' se esiste, imposto sezione inversa
         Dim InverseSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SectionList.FirstOrDefault(Function(x) x.dH = CurrSection.dW AndAlso x.dW = CurrSection.dH AndAlso x.sMaterial(0) = CurrSection.sMaterial(0))
         If Not IsNothing(InverseSection) Then Map.refProjectVM.BTLStructureVM.SetSelSection(InverseSection)
      End If
      EgtDraw()
   End Sub

#End Region    ' BackRotation

#Region "Invert"

   ''' <summary>
   ''' Returns a command that do Exec.
   ''' </summary>
   Public ReadOnly Property Invert_Command As ICommand
      Get
         If m_cmdInvert Is Nothing Then
            m_cmdInvert = New Command(AddressOf Invert)
         End If
         Return m_cmdInvert
      End Get
   End Property

   ''' <summary>
   ''' Execute the Exec.  This method is invoked by the ExecCommand.
   ''' </summary>
   Public Sub Invert()
      If ((Map.refMainMenuVM.SelPage = Pages.VIEW OrElse Map.refMainMenuVM.SelPage = Pages.ONLYPRODPAGE) AndAlso IsNothing(ProjectManagerVM.CurrProj)) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) Then Return
      ' se modalita' assemblato
      Dim bShowBuilding As Boolean = Map.refShowBeamPanelVM.ShowBuilding_IsChecked
      Configuration.AssembledMode(bShowBuilding)
      ' inverto i pezzi selezionati
      For Each Part In Map.refProjectVM.BTLStructureVM.SelBTLParts
         Part.Invert()
      Next
      ' se assemblato lo ripristino
      If bShowBuilding Then Map.refProjectVM.BTLStructureVM.ShowBuilding(True, False)
   End Sub

#End Region    ' Invert

#End Region    ' COMMANDS

End Class