Imports System.Collections.ObjectModel
Imports EgtBEAMWALL.Core
Imports EgtUILib
Imports EgtWPFLib5

Public Class LeftPanelVM
   Inherits VMBase

#Region "FIELDS & PROPERTIES"

   Private Property m_GridDims As New ObservableCollection(Of GridDimension)
   Public Property GridDims As ObservableCollection(Of GridDimension)
      Get
         Return m_GridDims
      End Get
      Set
         m_GridDims = Value
         NotifyPropertyChanged(NameOf(GridDims))
      End Set
   End Property

   Private m_LeftPanel_IsEnabled As Boolean = True
   Public ReadOnly Property LeftPanel_IsEnabled As Boolean
      Get
         Return m_LeftPanel_IsEnabled
      End Get
   End Property

   Public ReadOnly Property SearchFilter_IsEnabled As Boolean
      Get
         Return Not Map.refFreeContourManagerVM.bIsActive
      End Get
   End Property

   Private m_IsFilterBtnOpen As Boolean = False
   Public Property IsFilterBtnOpen As Boolean
      Get
         Return m_IsFilterBtnOpen
      End Get
      Set(value As Boolean)
         m_IsFilterBtnOpen = value
      End Set
   End Property
   Friend Sub SetIsFilterBtnOpen(bIsFilterBtnOpen As Boolean)
      m_IsFilterBtnOpen = bIsFilterBtnOpen
      NotifyPropertyChanged(NameOf(IsFilterBtnOpen))
   End Sub

   Private m_RotateAll_IsEnabled As Boolean = False
   Public ReadOnly Property RotateAll_IsEnabled As Boolean
      Get
         Return m_RotateAll_IsEnabled
      End Get
   End Property
   Friend Sub SetRotateAll_IsEnabled(value As Boolean)
      m_RotateAll_IsEnabled = value
      NotifyPropertyChanged(NameOf(RotateAll_IsEnabled))
   End Sub

   Private m_IsProjectParametersBtnOpen As Boolean = False
   Public Property IsProjectParametersBtnOpen As Boolean
      Get
         Return m_IsProjectParametersBtnOpen
      End Get
      Set(value As Boolean)
         m_IsProjectParametersBtnOpen = value
      End Set
   End Property
   Friend Sub SetIsProjectParametersBtnOpen(bIsProjectParametersBtnOpen As Boolean)
      m_IsProjectParametersBtnOpen = bIsProjectParametersBtnOpen
      NotifyPropertyChanged(NameOf(IsProjectParametersBtnOpen))
   End Sub

   Private m_CALCPanel_IsEnabled As Boolean = True
   Public ReadOnly Property CALCPanel_IsEnabled As Boolean
      Get
         Return m_CALCPanel_IsEnabled
      End Get
   End Property
   Friend Sub SetCALCPanel_IsEnabled(value As Boolean)
      m_CALCPanel_IsEnabled = value
      NotifyPropertyChanged(NameOf(CALCPanel_IsEnabled))
   End Sub

   ' Definizione comandi
   Private m_cmdVerifyAll As ICommand
   Private m_cmdVerifyFlipRotAll As ICommand
   Private m_cmdShowPopUpFilterBtnCmd As ICommand
   Private m_cmdRotateAll As ICommand
   Private m_cmdInvertAll As ICommand
   Private m_cmdResetCalc As ICommand

#Region "Messages"

   Public ReadOnly Property SearchFilter_Msg As String
      Get
         Return EgtMsg(61949)
      End Get
   End Property

   Public ReadOnly Property Section_Msg As String
      Get
         Return EgtMsg(61771)
      End Get
   End Property

   Public ReadOnly Property Group_Msg As String
      Get
         Return EgtMsg(61624)
      End Get
   End Property
   Public ReadOnly Property SubGroup_Msg As String
      Get
         Return EgtMsg(61623)
      End Get
   End Property

   Public ReadOnly Property ParType_Msg As String
      Get
         Return EgtMsg(61950)
      End Get
   End Property

   Public ReadOnly Property ParValue_Msg As String
      Get
         Return EgtMsg(61951)
      End Get
   End Property

   Public ReadOnly Property Pdn_Msg As String
      Get
         Return EgtMsg(61809)
      End Get
   End Property

   Public ReadOnly Property Description_Msg As String
      Get
         Return EgtMsg(62511)
      End Get
   End Property

   Public ReadOnly Property VerifyAll_ToolTip As String
      Get
         Return EgtMsg(61928)
      End Get
   End Property

   Public ReadOnly Property FilterAll_ToolTip As String
      Get
         Return EgtMsg(62570)
      End Get
   End Property

   Public ReadOnly Property ResetCalc_ToolTip As String
      Get
         Return EgtMsg(61940)
      End Get
   End Property

   Public ReadOnly Property RotateAll_ToolTip As String
      Get
         Return EgtMsg(63029)
      End Get
   End Property

   Public ReadOnly Property InvertAll_ToolTip As String
      Get
         Return EgtMsg(63030)
      End Get
   End Property

   Public ReadOnly Property MultipleModify_ToolTip As String
      Get
         Return EgtMsg(63031)
      End Get
   End Property

#End Region    ' Messages

#End Region    'FIELDS & PROPERTIES

#Region "CONSTRUCTOR"

   Sub New()
      ' imposto riferimento su mappa
      Map.SetRefLeftPanelVM(Me)
      ' imposto dimensioni colonne/righe della Grid
      DimensionsIniFile.ReadGridDimensions(ConstDims.LEFTPANEL_VIEW, GridDims)
   End Sub

#End Region    ' Constructor

#Region "METHODS"

   Friend Sub SetLeftPanelIsEnabled(bIsEnabled As Boolean)
      m_LeftPanel_IsEnabled = bIsEnabled
      NotifyPropertyChanged(NameOf(LeftPanel_IsEnabled))
      NotifyPropertyChanged(NameOf(SearchFilter_IsEnabled))
   End Sub

#End Region    ' METHODS

#Region "COMMANDS"

#Region "VerifyAll"

   Public ReadOnly Property VerifyAll_Command As ICommand
      Get
         If m_cmdVerifyAll Is Nothing Then
            m_cmdVerifyAll = New Command(AddressOf VerifyAll)
         End If
         Return m_cmdVerifyAll
      End Get
   End Property

   Friend Sub VerifyAll()
      If (IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) OrElse IsNothing(Map.refProjectVM.MachGroupPanelVM)) Then Return
      ' imposto flag per calcolo
      Map.refCALCPanelVM.SetCalculating(True)
      For Each BTLPartItem As BTLPartVM In Map.refProjectVM.BTLStructureVM.BTLPartVMList
         BTLPartItem.SetIsRowEnabled(False)
      Next
      Map.refCALCPanelVM.VerifyAll(ProjectType.PROJ, CalcIntegration.CmdTypes.CHECKNOSIM)
      Return
   End Sub

#End Region ' VerifyAll

#Region "VerifyAllFlipRot"

   Public ReadOnly Property VerifyAllFlipRot_Command As ICommand
      Get
         If m_cmdVerifyFlipRotAll Is Nothing Then
            m_cmdVerifyFlipRotAll = New Command(AddressOf VerifyAllFlipRot)
         End If
         Return m_cmdVerifyFlipRotAll
      End Get
   End Property

   Friend Sub VerifyAllFlipRot()
      If (IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) OrElse IsNothing(Map.refProjectVM.MachGroupPanelVM)) Then Return
      ' imposto flag per calcolo
      Map.refCALCPanelVM.SetCalculating(True)
      For Each BTLPartItem As BTLPartVM In Map.refProjectVM.BTLStructureVM.BTLPartVMList
         BTLPartItem.SetIsRowEnabled(False)
      Next
      Map.refCALCPanelVM.VerifyAll(ProjectType.PROJ, CalcIntegration.CmdTypes.FLIP_ROT)
      Return
   End Sub

#End Region ' VerifyAllRotate

#Region "ShowPopUpFilterBtnCommand"

   Public ReadOnly Property ShowPopUpFilterBtnCommand As ICommand
      Get
         If m_cmdShowPopUpFilterBtnCmd Is Nothing Then
            m_cmdShowPopUpFilterBtnCmd = New Command(AddressOf ShowPopUpFilterBtn)
         End If
         Return m_cmdShowPopUpFilterBtnCmd
      End Get
   End Property

   Public Sub ShowPopUpFilterBtn(ByVal param As Object)
      If m_IsFilterBtnOpen Then
         SetIsFilterBtnOpen(False)
      Else
         SetIsFilterBtnOpen(True)
      End If
   End Sub

#End Region    ' ShowPopUpFilterBtnCommand

#Region "RotateAll"

   Public ReadOnly Property RotateAll_Command As ICommand
      Get
         If m_cmdRotateAll Is Nothing Then
            m_cmdRotateAll = New Command(AddressOf RotateAll)
         End If
         Return m_cmdRotateAll
      End Get
   End Property

   Public Sub RotateAll()
      If IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) Then Return
      ' salvo sezione impostata
      Dim CurrSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SelSection
      ' se modalita' assemblato
      Dim bShowBuilding As Boolean = Map.refShowBeamPanelVM.ShowBuilding_IsChecked
      If bShowBuilding AndAlso Map.refShowBeamPanelVM.bShowAll Then
         ' devo smontarlo prima di calcolare le travi, altrimenti non trova i pezzi
         Map.refProjectVM.BTLStructureVM.ShowBuilding(False, False)
      End If
      ' ruoto i pezzi selezionati
      For Each Part In Map.refProjectVM.BTLStructureVM.SelBTLParts
         Part.BackRotation(False, False)
      Next
      ' se assemblato lo ripristino
      If bShowBuilding Then Map.refProjectVM.BTLStructureVM.ShowBuilding(True, False)
      ' se progetto travi e sezione precedente diversa da vuota (tutti i pezzi)
      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM AndAlso CurrSection <> SectionXMaterial.Empty Then
         ' se esiste, imposto sezione inversa
         Dim InverseSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SectionList.FirstOrDefault(Function(x) x.dH = CurrSection.dW AndAlso x.dW = CurrSection.dH AndAlso x.sMaterial(0) = CurrSection.sMaterial(0))
         If Not IsNothing(InverseSection) Then Map.refProjectVM.BTLStructureVM.SetSelSection(InverseSection)
      End If
      EgtDraw()
   End Sub

#End Region    ' RotateAll

#Region "InvertAll"

   Public ReadOnly Property InvertAll_Command As ICommand
      Get
         If m_cmdInvertAll Is Nothing Then
            m_cmdInvertAll = New Command(AddressOf InvertAll)
         End If
         Return m_cmdInvertAll
      End Get
   End Property

   Public Sub InvertAll()
      If IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) Then Return
      ' se modalita' assemblato
      Dim bShowBuilding As Boolean = Map.refShowBeamPanelVM.ShowBuilding_IsChecked
      If bShowBuilding AndAlso Map.refShowBeamPanelVM.bShowAll Then
         ' devo smontarlo prima di calcolare le travi, altrimenti non trova i pezzi
         Map.refProjectVM.BTLStructureVM.ShowBuilding(False, False)
      End If
      ' inverto i pezzi selezionati
      For Each Part In Map.refProjectVM.BTLStructureVM.SelBTLParts
         Part.Invert()
      Next
      ' se assemblato lo ripristino
      If bShowBuilding Then Map.refProjectVM.BTLStructureVM.ShowBuilding(True, False)
   End Sub

#End Region    ' InvertAll

#Region "ResetCalc"

   Public ReadOnly Property ResetCalc_Command As ICommand
      Get
         If m_cmdResetCalc Is Nothing Then
            m_cmdResetCalc = New Command(AddressOf ResetCalc)
         End If
         Return m_cmdResetCalc
      End Get
   End Property

   Public Sub ResetCalc()
      If (IsNothing(ProjectManagerVM.CurrProd) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) OrElse IsNothing(Map.refProjectVM.MachGroupPanelVM)) Then Return
      Map.refShowBeamPanelVM.ShowBuilding_IsEnabled = True
      Map.refCALCPanelVM.SetCalculating(False)
      For Each Part In Map.refProjectVM.BTLStructureVM.BTLPartVMList
         If Part.nGlobalState <> CalcStates.NOTCALCULATED Then
            ' Resetto info
            If MyExecProcessManager.sInfoNgePartList.Count > 0 Then
               For Each InfoNgePart As String In MyExecProcessManager.sInfoNgePartList
                  Dim sInfoNgePart As String() = InfoNgePart.Split("="c)
                  EgtRemoveInfo(Part.nPartId, sInfoNgePart(0))
               Next
            End If
            ' resetto stato dei calcoli
            Part.ResetCalcTotalPart()
         End If
         If Not Part.IsRowEnabled Then Part.SetIsRowEnabled(True)
      Next
   End Sub

#End Region    ' ResetCalc

#End Region    ' COMMANDS

End Class