Imports System.Collections.ObjectModel
Imports System.IO
Imports EgtBEAMWALL.Core
Imports EgtUILib
Imports EgtWPFLib5

Public Class MachinePanelVM
   Inherits EgtWPFLib5.MachinePanelVM

#Region "FIELDS & PROPERTIES"

   ' Radice del direttorio delle macchine
   Private m_sMachinesRoot As String

   ' Macchina correntemente selezionata e quindi attiva
   Private m_SelectedMachine As Machine = Nothing
   Public Overrides Property SelectedMachine As Machine
      Get
         Return m_SelectedMachine
      End Get
      Set(value As Machine)
         If value IsNot m_SelectedMachine Then
            ' imposto macchina in DbGeometrico
            If EgtSetCurrMachine(value.Name) Then
               m_SelectedMachine = value
            End If
            ' Salvo impostazione macchina corrente
            SaveCurrentMachine()
            NotifyPropertyChanged(NameOf(SelectedMachine))
            ' inizializzo la macchina selezionata come macchina corrente
            Dim nMachType As MachineType = DirectCast(m_SelectedMachine, MyMachine).nType
            SectionXMaterial.SetType(nMachType)
            InitCurrentMachine(Map.refMainWindowVM.MainWindowM.sMachinesRoot, value.Name, nMachType)
            ' mostro bottone tabella beam o wall a seconda del tipo
            m_BeamTable_Visibility = If(nMachType = MachineType.BEAM OrElse nMachType = MachineType.BOTH, Visibility.Visible, Visibility.Collapsed)
            m_WallTable_Visibility = If(nMachType = MachineType.WALL OrElse nMachType = MachineType.BOTH, Visibility.Visible, Visibility.Collapsed)
            NotifyPropertyChanged(NameOf(BeamTable_Visibility))
            NotifyPropertyChanged(NameOf(WallTable_Visibility))
            ' carico i Parametri Q da mostrare (Beam, Wall o entrambi) in base al tipo di macchina selezionata
            If Not IsNothing(Map.refConfigurationPageVM) Then
               ' carico i parametri Q dei Process letti dall'ini
               Map.refConfigurationPageVM.GetQParamsList()
               ' carico la lista di tutti i parametri Q ciclando su ogni Process di PRCList
               If Not IsNothing(Map.refConfigurationPageVM.QBTLParamVMList) Then
                  Map.refConfigurationPageVM.QBTLParamVMList.Clear()
               End If
               For Each PRCItem In Map.refConfigurationPageVM.PRCList
                  For Each QBTLParam In PRCItem.QBTLParamVMList
                     Map.refConfigurationPageVM.QBTLParamVMList.Add(QBTLParam)
                  Next
               Next
               NotifyPropertyChanged(NameOf(Map.refConfigurationPageVM.QBTLParamVMList))
            End If
            ' aggiorno nome macchina in statusbar
            Map.refMyStatusBarVM.RefreshMachName()
         End If
      End Set
   End Property

   Private m_MachPanel_IsEnabled As Boolean = True
   Public Property MachPanel_IsEnabled As Boolean
      Get
         Return m_MachPanel_IsEnabled
      End Get
      Set(value As Boolean)
         m_MachPanel_IsEnabled = value
         NotifyPropertyChanged("MachPanel_IsEnabled")
      End Set
   End Property

   Private m_BeamTable_Visibility As Visibility
   Public ReadOnly Property BeamTable_Visibility As Visibility
      Get
         Return m_BeamTable_Visibility
      End Get
   End Property

   Private m_WallTable_Visibility As Visibility
   Public ReadOnly Property WallTable_Visibility As Visibility
      Get
         Return m_WallTable_Visibility
      End Get
   End Property

#Region "Messages"

   Public ReadOnly Property ToolDBMsg As String
      Get
         Return EgtMsg(MSG_MACHINEPAGEUC + 6)
      End Get
   End Property
   Public ReadOnly Property MachiningDbMsg As String
      Get
         Return EgtMsg(MSG_MACHINEPAGEUC + 7)
      End Get
   End Property
   Public ReadOnly Property SetUpMsg As String
      Get
         Return EgtMsg(MSG_ALARMSPAGEUC + 33)
      End Get
   End Property

#End Region    ' Messages

#Region "ToolTip"

   Public ReadOnly Property ToolDBToolTip As String
      Get
         Return EgtMsg(5003)
      End Get
   End Property
   Public ReadOnly Property MachiningDbToolTip As String
      Get
         Return EgtMsg(5004)
      End Get
   End Property
   Public ReadOnly Property SetUpToolTip As String
      Get
         Return EgtMsg(31501)
      End Get
   End Property

#End Region   ' ToolTip

   ' Definizione comandi
   Private m_cmdBeamTable As ICommand
   Private m_cmdWallTable As ICommand

#End Region    'FIELDS & PROPERTIES

#Region "CONSTRUCTOR"

   Sub New()
      ' Creo riferimento a questa classe in Map
      Map.SetRefMachinePanelVM(Me)
      ' recupero cartella radice delle macchine
      m_sMachinesRoot = Map.refMainWindowVM.MainWindowM.sMachinesRoot
      ' Carica macchine da cartella delle macchine
      MyMachine.MachineListInit(m_sMachinesRoot, MachineList)
   End Sub

#End Region    ' CONSTRUCTOR

#Region "METHODS"

   Friend Sub LoadCurrentMachine()
      If MachineList.Count = 0 Then Return
      Dim CurrMachine As Machine = Nothing
      Dim CurrMachineName As String = String.Empty
      GetMainPrivateProfileString(S_MACH, K_CURRMACH, String.Empty, CurrMachineName)
      Dim bFound As Boolean = False
      If Not String.IsNullOrEmpty(CurrMachineName) Then
         For Each Mach In MachineList
            If Mach.Name = CurrMachineName Then
               bFound = True
               CurrMachine = Mach
               Exit For
            End If
         Next
      End If
      If Not bFound And MachineList.Count > 0 Then
         CurrMachine = MachineList(0)
      End If
      If Not IsNothing(CurrMachine) Then
         If EgtSetCurrMachine(CurrMachine.Name) Then
            SelectedMachine = CurrMachine
         End If
      End If
   End Sub

   Friend Sub SaveCurrentMachine()
      If IsNothing(m_SelectedMachine) Then Return
      WriteMainPrivateProfileString(S_MACH, K_CURRMACH, SelectedMachine.Name)
   End Sub

   Friend Sub UpdateCurrentMachine()
      'EgtSetCurrentContext(IniFile.m_ProjectSceneContext)
      Dim sMachName As String = String.Empty
      If EgtGetCurrMachineName(sMachName) Then
         For Each Mach In MachineList
            If Mach.Name = sMachName Then
               SelectedMachine = Mach
               Exit For
            End If
         Next
      End If
   End Sub

   Friend Function BeamMachDb() As Boolean
      ' Assegno le path
      Dim sBaseDir As String = m_sMachinesRoot & "\" & m_SelectedMachine.Name & "\" & "Beam"
      ' verifico se ci sono i file ini
      Dim sMachTypePath As String = sBaseDir & "\MachiningTypes.ini"
      Dim sTabTemplPath As String = sBaseDir & "\BeamTableTemplate.ini"
      If File.Exists(sMachTypePath) AndAlso File.Exists(sTabTemplPath) Then
         ' apro finestra di gestione lavorazioni travi
         Dim sTitle = EgtMsg(9000)               'Tabelle delle lavorazioni delle travi
         Dim BeamMchsWinVM As New MyBeamMachiningsWindowVM(sTitle, sBaseDir, sMachTypePath, sTabTemplPath)
         Dim BeamMchsWinV As New BeamMachiningsWindowV(Application.Current.MainWindow, BeamMchsWinVM)
         BeamMchsWinV.ShowDialog()
      Else
         ' Impossibile aprire l'Editor delle lavorazioni delle travi.<br/>Mancano i file di configurazione. - Errore
         MessageBox.Show(EgtMsg(9009), EgtMsg(9008), MessageBoxButton.OK, MessageBoxImage.Stop)
      End If
      Return True
   End Function

   Friend Function WallMachDb() As Boolean
      ' Assegno le path
      Dim sBaseDir As String = m_sMachinesRoot & "\" & m_SelectedMachine.Name & "\" & "Wall"
      ' verifico se ci sono i file ini
      Dim sMachTypePath As String = sBaseDir & "\MachiningTypes.ini"
      Dim sTabTemplPath As String = sBaseDir & "\WallTableTemplate.ini"
      If File.Exists(sMachTypePath) AndAlso File.Exists(sTabTemplPath) Then
         ' apro finestra di gestione lavorazioni pareti
         Dim sTitle = EgtMsg(9010)               'Tabelle delle lavorazioni delle pareti
         Dim WallMchsWinVM As New MyBeamMachiningsWindowVM(sTitle, sBaseDir, sMachTypePath, sTabTemplPath, False)
         Dim WallMchsWinV As New BeamMachiningsWindowV(Application.Current.MainWindow, WallMchsWinVM)
         WallMchsWinV.ShowDialog()
      Else
         ' Impossibile aprire l'Editor delle lavorazioni delle pareti.<br/>Mancano i file di configurazione. - Errore
         MessageBox.Show(EgtMsg(9011), EgtMsg(9008), MessageBoxButton.OK, MessageBoxImage.Stop)
      End If
      Return True
   End Function

   Public Overrides Sub ToolDb(ByVal param As Object)
      If Not VerifyMachinesDir(m_sMachinesRoot) Then Return
      ' ricarico il database per intercettare eventuali aggiornamenti fatti da altre istanze del programma (se la cartella Machines è condivisa)
      If Not EgtTdbReload() Then
         EgtOutLog("Impossible reloading tool Db")
         MessageBox.Show(EgtMsg(MSG_TOOLDBERRORS + 30), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
         Return
      End If

      Dim ToolDbWindowVM As New MyToolDbWindowVM(CurrentMachine.sMachDir, CurrentMachine.sMachIniFile, Map.refSceneHostVM.MainScene.GetCtx(), "Beam")
      Dim ToolDbWindowV As New ToolDbWindowV(Application.Current.MainWindow, ToolDbWindowVM)
      If ToolDbWindowVM.MatType <> 0 Then
         ToolDbWindowV.Height = 640
         ToolDbWindowV.Width = 1024
         ToolDbWindowV.ShowDialog()
      Else
         Exit Sub
      End If

   End Sub

   Public Overrides Sub MachDb(ByVal param As Object)
      If Not VerifyMachinesDir(m_sMachinesRoot) Then Return
      ' ricarico il database per intercettare eventuali aggiornamenti fatti da altre istanze del programma (se la cartella Machines è condivisa)
      If Not EgtMdbReload() Then
         EgtOutLog("Impossible reloading machining Db")
         MessageBox.Show(EgtMsg(MSG_MACHININGDBERRORS + 8), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
         Return
      End If
      Dim MachDbWindowVM As New EgtWPFLib5.MachiningDbWindowVM(CurrentMachine.sMachIniFile, Map.refSceneHostVM.MainScene.GetCtx(), "Stone")
      Dim MachDbWindowV As New EgtWPFLib5.MachiningDbWindowV(Application.Current.MainWindow, MachDbWindowVM)

      If EgtWPFLib5.MachiningTreeViewItem.m_MatType <> 0 Then
         MachDbWindowV.Height = 768
         MachDbWindowV.Width = 1024
         MachDbWindowV.ShowDialog()
      Else
         Exit Sub
      End If

   End Sub

   Public Overrides Sub SetUp(ByVal param As Object)
      ' verifico che il file di configurazione attrezzaggio (lua) della macchina esista
      If Not File.Exists(CurrentMachine.sMachDir & "\Scripts\" & SETUP_LUA) Then
         EgtOutLog("SetUp error: SetUp configuration file doesn't exist ")
         MessageBox.Show(EgtMsg(MSG_SETUPERRORS + 7), EgtMsg(MSG_SETUPERRORS + 1), MessageBoxButton.OK, MessageBoxImage.Error)
         Return
      End If
      ' carico Lua che contiene le funzioni per ottenere le posizioni valide dell'utensile selezionato,
      ' e testa e uscita dell'utensile attrezzato
      EgtLuaExecFile(CurrentMachine.sMachDir & "\Scripts\" & SETUP_LUA)
      ' verifico che le teste riportate in configurazione esistano
      Dim Index As Integer = 1
      Dim nErr As Integer = 0
      While nErr = 0
         Dim sHead As String = String.Empty
         nErr = 999
         EgtLuaSetGlobIntVar("STU.INDEX", Index)
         EgtLuaCallFunction("STU.GetTcPosHeadGroupFromPos")
         ' Leggo variabili
         EgtLuaGetGlobStringVar("STU.HEAD", sHead)
         EgtLuaGetGlobIntVar("STU.ERR", nErr)
         If nErr = 0 Then
            If EgtGetHeadExitCount(sHead) = 0 Then
               MessageBox.Show(EgtMsg(MSG_SETUPERRORS + 8), EgtMsg(MSG_SETUPERRORS + 1), MessageBoxButton.OK, MessageBoxImage.Error)
               Return
            End If
         End If
         Index += 1
      End While
      ' Reset lua
      EgtLuaResetGlobVar("STU")

      Dim SetUpWindow As New SetUpWindowV(Application.Current.MainWindow, New SetUpWindowVM(CurrentMachine.sMachDir, CurrentMachine.sMachineName))
      SetUpWindow.Height = 614
      SetUpWindow.Width = 1024
      SetUpWindow.ShowDialog()

   End Sub

#End Region

#Region "COMMANDS"

#Region "BeamTable"

   ''' <summary>
   ''' Returns a command that do Exec.
   ''' </summary>
   Public ReadOnly Property BeamTable_Command As ICommand
      Get
         If m_cmdBeamTable Is Nothing Then
            m_cmdBeamTable = New Command(AddressOf BeamMachDb)
         End If
         Return m_cmdBeamTable
      End Get
   End Property

#End Region    ' BeamTable

#Region "WallTable"

   ''' <summary>
   ''' Returns a command that do Exec.
   ''' </summary>
   Public ReadOnly Property WallTable_Command As ICommand
      Get
         If m_cmdWallTable Is Nothing Then
            m_cmdWallTable = New Command(AddressOf WallMachDb)
         End If
         Return m_cmdWallTable
      End Get
   End Property

#End Region    ' WallTable

#End Region    ' COMMANDS

End Class