Imports System.Collections.ObjectModel
Imports EgtWPFLib5
Imports EgtBEAMWALL.Core

Public Class MyInstrumentPanelVM
   Inherits InstrumentPanelVM

   ' Definizione comandi
   Private m_cmdData As ICommand
   Private m_cmdChangeParameter As ICommand
   Private m_cmdVerify As ICommand
   Private m_cmdSimulate As ICommand

   Public Overrides Function OnPostGetDistIsChecked() As Boolean
      Map.refSceneHostVM.MainScene.SetStatusNull()
      Return True
   End Function

#Region "COMMANDS"

#Region "Data"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property Data_Command As ICommand
      Get
         If m_cmdData Is Nothing Then
            m_cmdData = New Command(AddressOf Data)
         End If
         Return m_cmdData
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Data()
      Dim BTLDataWnd As New BTLDataWndV(Application.Current.MainWindow, New BTLDataWndVM())
      BTLDataWnd.ShowDialog()
   End Sub

#End Region ' Data

#Region "ChangeParameter"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property ChangeParameter_Command As ICommand
      Get
         If m_cmdChangeParameter Is Nothing Then
            m_cmdChangeParameter = New Command(AddressOf ChangeParameter)
         End If
         Return m_cmdChangeParameter
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub ChangeParameter()
      Dim ChangeParameterWndVM As New ChangeParameterWndVM
      Dim ChangeParameterWnd As New ChangeParameterWndV(Application.Current.MainWindow, ChangeParameterWndVM)
      If ChangeParameterWnd.ShowDialog() Then
         ' faccio passare pezzi
         If Not IsNothing(ChangeParameterWndVM.SelParam) Then
            For Each Part In Map.refProjectVM.BTLStructureVM.BTLPartVMList
               For Each Feature In Part.BTLFeatureVMList.Where(Function(x) x.nPRC = ChangeParameterWndVM.SelPRC.nPRC AndAlso CalcBeamPrivateProfileGRP(x.nSelGRP) = ChangeParameterWndVM.SelPRC.nGRP)
                  If ChangeParameterWndVM.SelParam.BTLParamM.nType = BTLParamType.CHECKBOX AndAlso Feature.bDO = ChangeParameterWndVM.SelParam.bActualValue Then
                     Feature.bDO = ChangeParameterWndVM.SelParam.bNewValue
                  Else
                     Dim ParamList As ObservableCollection(Of BTLParamVM)
                     If ChangeParameterWndVM.SelParam.BTLParamM.bIsP Then
                        ParamList = Feature.PBTLParamVMList
                     Else
                        ParamList = Feature.QBTLParamVMList
                     End If
                     For Each Param In ParamList.Where(Function(x) x.sName = ChangeParameterWndVM.SelParam.sName)
                        Select Case Param.nType
                           Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
                              If Param.dValue = ChangeParameterWndVM.SelParam.dActualValue Then
                                 Param.UpdateParamValue(ChangeParameterWndVM.SelParam.dNewValue, "")
                                 '' rinfresco valori parametri feature correntemente selezionata
                                 'If Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart) AndAlso
                                 '   Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM) AndAlso
                                 '   Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM Is Feature Then
                                 '   Param.NotifyPropertyChanged("sValue")
                                 'End If
                              End If
                           Case BTLParamType.STRING_
                              If Param.sValue = ChangeParameterWndVM.SelParam.sActualValue Then
                                 Param.UpdateParamValue(0, ChangeParameterWndVM.SelParam.sNewValue)
                                 '' rinfresco valori parametri feature correntemente selezionata
                                 'If Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart) AndAlso
                                 '   Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM) AndAlso
                                 '   Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.nPRC = ChangeParameterWndVM.SelPRC.nPRC AndAlso
                                 '   Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.nSelGRP = ChangeParameterWndVM.SelPRC.nGRP Then
                                 '   Param.NotifyPropertyChanged("sValue")
                                 'End If
                              End If
                        End Select
                     Next
                  End If
               Next
               '' faccio passare feature
               'For Each Feature In Part.FeatureList
               '   If Feature.nPRC = ChangeParameterWndVM.SelPRC.nPRC Then
               '      For Each Param In Feature.PParamList
               '         If Param.sName = ChangeParameterWndVM.SelParam.sName Then
               '            Select Case Param.nType
               '               Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
               '                  If Param.dValue = ChangeParameterWndVM.SelParam.dActualValue Then
               '                     Param.dValue = ChangeParameterWndVM.SelParam.dValue
               '                  End If
               '               Case BTLParamType.STRING_
               '                  If Param.sValue = ChangeParameterWndVM.SelParam.sActualValue Then
               '                     Param.sValue = ChangeParameterWndVM.SelParam.sValue
               '                  End If
               '            End Select
               '         End If
               '      Next
               '   End If
               'Next
            Next
         End If
      End If
   End Sub

#End Region ' ChangeParameter

#Region "Verify"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property Verify_Command As ICommand
      Get
         If m_cmdVerify Is Nothing Then
            m_cmdVerify = New Command(AddressOf Verify)
         End If
         Return m_cmdVerify
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Verify()
      Dim Calc As New CalcIntegration
      Dim BarList() As CalcIntegration.Bar
      If Map.refMainMenuVM.SelPage = Pages.VIEW Then
         If ((Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift) Then
            Dim TempBarList(Map.refProjectVM.BTLStructureVM.BTLPartVMList.Count - 1) As CalcIntegration.Bar
            For PartIndex = 0 To Map.refProjectVM.BTLStructureVM.BTLPartVMList.Count - 1
               Dim CurrPart As BTLPartVM = Map.refProjectVM.BTLStructureVM.BTLPartVMList(PartIndex)
               Dim Bar As New CalcIntegration.Bar With {.nBarId = CurrPart.nPartId,
                                                         .nBarType = ProjectType.PROJ,
                                                         .bBarOk = True}
               Select Case CurrPart.nState
                  Case Core.CalcStates.OK
                     Bar.nCmdType = CalcIntegration.CmdType.GENERATE
                  Case Else
                     Bar.nCmdType = CalcIntegration.CmdType.CHECKGEN
               End Select
               TempBarList(PartIndex) = Bar
            Next
            BarList = TempBarList
         ElseIf Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart) Then
            Dim TempBarList(0) As CalcIntegration.Bar
            Dim Bar As New CalcIntegration.Bar With {.nBarId = Map.refProjectVM.BTLStructureVM.SelBTLPart.nPartId,
                                                      .nBarType = ProjectType.PROJ,
                                                      .bBarOk = True}
            Select Case Map.refProjectVM.BTLStructureVM.SelBTLPart.nState
               Case Core.CalcStates.OK
                  Bar.nCmdType = CalcIntegration.CmdType.GENERATE
               Case Else
                  Bar.nCmdType = CalcIntegration.CmdType.CHECKGEN
            End Select
            TempBarList(0) = Bar
            BarList = TempBarList
         Else
            Return
         End If
         Calc.Run(BarList, Map.refProjManagerVM.CurrProj.sProjDirPath, AddressOf ManageCalc)

      ElseIf Map.refMainMenuVM.SelPage = Pages.MACHINING Then
         If ((Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift) Then
            Dim TempBarList(Map.refMachGroupPanelVM.MachGroupVMList.Count - 1) As CalcIntegration.Bar
            For PartIndex = 0 To Map.refMachGroupPanelVM.MachGroupVMList.Count - 1
               Dim CurrPart As MyMachGroupVM = Map.refMachGroupPanelVM.MachGroupVMList(PartIndex)
               Dim Bar As New CalcIntegration.Bar With {.nBarId = CurrPart.Id,
                                                         .nBarType = ProjectType.PROD,
                                                         .bBarOk = True}
               Select Case CurrPart.nState
                  Case Core.CalcStates.OK
                     Bar.nCmdType = CalcIntegration.CmdType.GENERATE
                  Case Else
                     Bar.nCmdType = CalcIntegration.CmdType.CHECKGEN
               End Select
               TempBarList(PartIndex) = Bar
            Next
            BarList = TempBarList
         ElseIf Not IsNothing(Map.refMachGroupPanelVM.SelectedMachGroup) Then
            Dim TempBarList(0) As CalcIntegration.Bar
            Dim Bar As New CalcIntegration.Bar With {.nBarId = Map.refMachGroupPanelVM.SelectedMachGroup.Id,
                                                      .nBarType = ProjectType.PROD,
                                                      .bBarOk = True}
            Dim SelMachGroup As MyMachGroupVM = Map.refMachGroupPanelVM.SelectedMachGroup
            Select Case SelMachGroup.nState
               Case Core.CalcStates.OK
                  Bar.nCmdType = CalcIntegration.CmdType.GENERATE
               Case Else
                  Bar.nCmdType = CalcIntegration.CmdType.CHECKGEN
            End Select
            TempBarList(0) = Bar
            BarList = TempBarList
         Else
            Return
         End If
         Calc.Run(BarList, Map.refProdManagerVM.CurrProd.sProdDirPath, AddressOf ManageCalc)
      End If
   End Sub

   Private Sub ManageCalc(dProgress As Double, sProgress As String, ByRef bCancel As Boolean)
      If dProgress = 0 Then
         Map.refMyStatusBarVM.SetLoadingProgress_Visibility(True)
         Map.refMyStatusBarVM.SetStopProgress_IsActive(True)
         Map.refMyStatusBarVM.SetStopProgress_IsEnabled(True)
         Map.refMyStatusBarVM.SetOutputMessage(sProgress)
         Map.refMyStatusBarVM.SetStopProgress_IsActive(True)
         Map.refMyStatusBarVM.SetStopProgress_IsEnabled(True)
      ElseIf dProgress = 1 Then
         Map.refMyStatusBarVM.SetLoadingProgress_Visibility(False)
         Map.refMyStatusBarVM.SetStopProgress_IsActive(False)
         Map.refMyStatusBarVM.SetStopProgress_IsEnabled(False)
         Map.refMyStatusBarVM.SetOutputMessage(sProgress, 3)
      End If
      bCancel = Map.refMyStatusBarVM.bStopProgress
      Map.refMyStatusBarVM.SetLoadingProgress(dProgress * 100)
      Map.refMyStatusBarVM.SetOutputMessage(sProgress)
   End Sub

#End Region ' Verify

#Region "Simulate"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property Simulate_Command As ICommand
      Get
         If m_cmdSimulate Is Nothing Then
            m_cmdSimulate = New Command(AddressOf Simulate)
         End If
         Return m_cmdSimulate
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Simulate()
      Dim Calc As New CalcIntegration
      Dim BarList() As CalcIntegration.Bar
      If Map.refMainMenuVM.SelPage = Pages.VIEW Then
         If Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart) Then
            Dim TempBarList(0) As CalcIntegration.Bar
            Dim Bar As New CalcIntegration.Bar With {.nBarId = Map.refProjectVM.BTLStructureVM.SelBTLPart.nPartId,
                                                      .nBarType = ProjectType.PROJ,
                                                      .bBarOk = True,
                                                      .nCmdType = CalcIntegration.CmdType.SIMULATE}
            TempBarList(0) = Bar
            BarList = TempBarList
         Else
            Return
         End If
         Calc.Run(BarList, Map.refProjManagerVM.CurrProj.sProjDirPath, AddressOf ManageCalc)
      ElseIf Map.refMainMenuVM.SelPage = Pages.MACHINING Then
         If Not IsNothing(Map.refMachGroupPanelVM.SelectedMachGroup) Then
            Dim TempBarList(0) As CalcIntegration.Bar
            Dim Bar As New CalcIntegration.Bar With {.nBarId = Map.refMachGroupPanelVM.SelectedMachGroup.Id,
                                                      .nBarType = ProjectType.PROD,
                                                      .bBarOk = True,
                                                      .nCmdType = CalcIntegration.CmdType.SIMULATE}
            TempBarList(0) = Bar
            BarList = TempBarList
         Else
            Return
         End If
         Calc.Run(BarList, Map.refProdManagerVM.CurrProd.sProdDirPath, AddressOf ManageCalc)
      End If
   End Sub

#End Region ' Simulate

#End Region    ' COMMANDS

End Class