Merge branch 'RawPartLastCreation' into AddBeamPosZ

- correzione gestione spessori per nesting manuale pareti (ora si usano sempre operatori di SectionXMaterial).

EgtBEAMWALL.Core/BTLModel/BTLFeatureM.vb

@@ -467,7 +467,7 @@ Public Class BTLFeatureM
          If Param.nType = BTLParamType.DOUBLE_ Or Param.nType = BTLParamType.LENGTH Then
             Param.SetValue(Param.dDefault)
          ElseIf Param.nType = BTLParamType.STRING_ Then
-            Param.SetValue("")
+            Param.SetValue(Param.sDefault)
          ElseIf Param.nType = BTLParamType.COMBO Then
             Param.nSelValue = Param.dDefault
          End If

EgtBEAMWALL.Core/BTLModel/BTLParamM.vb

@@ -129,6 +129,16 @@ Public Class BTLParamM
       End Set
    End Property
 
+   Protected m_sDefault As String
+   Public Property sDefault As String
+      Get
+         Return m_sDefault
+      End Get
+      Set(value As String)
+         m_sDefault = value
+      End Set
+   End Property
+
    ' tipo della variabile
    Protected m_nType As BTLParamType
    Public ReadOnly Property nType As BTLParamType
@@ -136,6 +146,9 @@ Public Class BTLParamM
          Return m_nType
       End Get
    End Property
+   Public Sub SetType(value As BTLParamType)
+      m_nType = value
+   End Sub
 
    ' Feature a cui appartiene il parametro
    Protected m_ParentFeature As BTLFeatureM
@@ -245,16 +258,18 @@ Public Class BTLParamM
    End Function
 
    ' new per stringhe
-   Public Shared Function CreateBTLParam(ParentFeature As BTLFeatureM, IsP As Boolean, nType As BTLParamType, sParamName As String, sDescription As String)
+   Public Shared Function CreateBTLParam(ParentFeature As BTLFeatureM, IsP As Boolean, nType As BTLParamType, sParamName As String, sDefault As String, sDescription As String)
       Dim NewBTLParam As New BTLParamM
       NewBTLParam.StdInit(ParentFeature, IsP, nType, sParamName, sDescription)
+      NewBTLParam.m_sDefault = sDefault
       Return NewBTLParam
    End Function
 
    ' new per stringhe (con tipo Beam o Wall)
-   Public Shared Function CreateBTLParam(ParentFeature As BTLFeatureM, IsP As Boolean, nType As BTLParamType, sParamName As String, sDescription As String, sBWType As String)
+   Public Shared Function CreateBTLParam(ParentFeature As BTLFeatureM, IsP As Boolean, nType As BTLParamType, sParamName As String, sDefault As String, sDescription As String, sBWType As String)
       Dim NewBTLParam As New BTLParamM
       NewBTLParam.StdInit(ParentFeature, IsP, nType, sParamName, sDescription)
+      NewBTLParam.m_sDefault = sDefault
       NewBTLParam.m_sBWType = sBWType
       Return NewBTLParam
    End Function

EgtBEAMWALL.Core/BTLModel/BTLPartM.vb

@@ -1210,7 +1210,7 @@ Public Class BTLPartM
       Return New List(Of BTLFeatureM)(m_BTLFeatureMList)
    End Function
 
-   Public Function Rotation(IsPositive As Boolean, SelectedMachineType As MachineType, Optional dAng As Double = 90) As Boolean
+   Public Function Rotation(IsPositive As Boolean, SelectedMachineType As MachineType, Optional bRedraw As Boolean = True, Optional dAng As Double = 90) As Boolean
       ' recupero il box del pezzo
       Dim nLs As Integer = EgtGetFirstNameInGroup(nPartId, "Box")
       Dim b3Solid As New BBox3d
@@ -1249,7 +1249,7 @@ Public Class BTLPartM
          ' ripristino inversione
          Inversion(SelectedMachineType)
       End If
-      EgtDraw()
+      If bRedraw Then EgtDraw()
       Return bOk
    End Function
 

EgtBEAMWALL.Core/CALCPanel/CalcIntegration.vb

@@ -65,7 +65,7 @@ Public Module CalcIntegration
             End If
          ElseIf Bar.nProgramPage = ProjectType.PROD Then
             If Bar.nGlobState = CalcStates.NOTCALCULATED Then
-               Bar.sBarPath = CreateNewProjectFromMachGroup(Bar.nBarId, sProjDirPath)
+               Bar.sBarPath = CreateNewProjectFromMachGroup(Bar.nBarId, sProjDirPath, Bar.nGlobState)
             Else
                Dim sMachGroupName As String = ""
                EgtGetMachGroupName(Bar.nBarId, sMachGroupName)
@@ -78,7 +78,7 @@ Public Module CalcIntegration
             If Bar.nProgramPage = ProjectType.PROJ Then
                Bar.sBarPath = CreateNewProjectFromPart(Bar.nBarId, sProjDirPath)
             ElseIf Bar.nProgramPage = ProjectType.PROD Then
-               Bar.sBarPath = CreateNewProjectFromMachGroup(Bar.nBarId, sProjDirPath)
+               Bar.sBarPath = CreateNewProjectFromMachGroup(Bar.nBarId, sProjDirPath, Bar.nGlobState)
             End If
          Next
       End If
@@ -355,8 +355,14 @@ Public Module CalcIntegration
       Return If(bOk, sPartFilePath, String.Empty)
    End Function
 
-   Private Function CreateNewProjectFromMachGroup(nMachGroupId As Integer, sProjDirPath As String) As String
+   Private Function CreateNewProjectFromMachGroup(nMachGroupId As Integer, sProjDirPath As String, nGlobState As Integer) As String
-      If Not m_bIsSupervisor Then
+      ' aggiorno cutid e taskid solo fuori dal supervisore o se pezzo ricalcolato
+      If Not m_bIsSupervisor OrElse nGlobState = CalcStates.NOTCALCULATED Then
+         Dim DisableMgr As DisableModifiedMgr = Nothing
+         If m_bIsSupervisor Then
+            ' Disabilito segnalazione modificato
+            DisableMgr = New DisableModifiedMgr
+         End If
          ' Aggiorno identificativi per segnalazione errori
          Dim nOldMachGroup As Integer = EgtGetCurrMachGroup()
          If nMachGroupId <> nOldMachGroup Then EgtSetCurrMachGroup(nMachGroupId)
@@ -378,6 +384,10 @@ Public Module CalcIntegration
                EgtResetCurrMachGroup()
             End If
          End If
+         If m_bIsSupervisor Then
+            ' Ripristino stato segnalazione modifica
+            DisableMgr.ReEnable()
+         End If
       End If
 
       ' Salvo gruppo di lavorazione nel suo progetto

EgtBEAMWALL.Core/Constants/ConstBeam.vb

@@ -251,6 +251,7 @@
    Public Const MGR_RPT_PANELLEN As String = "PANELLEN"
    Public Const MGR_RPT_PANELWIDTH As String = "PANELWIDTH"
    Public Const MGR_RPT_PANELHEIGHT As String = "PANELHEIGHT"
+   Public Const MGR_RPT_PANELPOSZ As String = "PANELPOSZ"
    Public Const MGR_RPT_PART As String = "PART"
 
    ' parametri P per comunicazione con la macchina

EgtBEAMWALL.Core/Constants/ConstColumns.vb

@@ -6,6 +6,7 @@
    Public Const COL_STARTCUT As String = "colSTARTCUT"
    Public Const COL_W As String = "colW"
    Public Const COL_L As String = "colL"
+   Public Const COL_POSZ As String = "colPOSZ"
    Public Const COL_ROT As String = "colROT"
    Public Const COL_FLIP As String = "colFLIP"
    Public Const COL_POSX As String = "colPOSX"

EgtBEAMWALL.Core/MachGroupModel/MyMachGroupM.vb

@@ -149,6 +149,16 @@ Public Class MyMachGroupM
       End Get
    End Property
 
+   Protected m_dPosZ As Double = 0
+   Public Property dPosZ As Double
+      Get
+         Return m_dPosZ
+      End Get
+      Set(value As Double)
+         m_dPosZ = value
+      End Set
+   End Property
+
 #End Region    ' Wall
 
 #Region "Calc"
@@ -311,6 +321,7 @@ Public Class MyMachGroupM
          EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELLEN, NewMachGroupM.m_dL)
          EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELWIDTH, NewMachGroupM.m_dW)
          EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELHEIGHT, NewMachGroupM.m_dH)
+         EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELPOSZ, NewMachGroupM.m_dPosZ)
          NewMachGroupM.m_dTotMat = NewMachGroupM.m_dL * NewMachGroupM.m_dW * NewMachGroupM.m_dH
          NewMachGroupM.m_PartMList = LoadParts(NewMachGroupM)
          For Each Part In NewMachGroupM.m_PartMList
@@ -343,6 +354,7 @@ Public Class MyMachGroupM
          EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELLEN, NewMachGroupM.m_dL)
          EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELWIDTH, NewMachGroupM.m_dW)
          EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELHEIGHT, NewMachGroupM.m_dH)
+         EgtGetInfo(NewMachGroupM.m_Id, MGR_RPT_PANELPOSZ, NewMachGroupM.m_dPosZ)
          NewMachGroupM.m_dTotMat = NewMachGroupM.m_dL * NewMachGroupM.m_dW
          NewMachGroupM.m_PartMList = LoadParts(NewMachGroupM)
          For Each Part In NewMachGroupM.m_PartMList

EgtBEAMWALL.Core/MachGroupModel/MyMachGroupPanelM.vb

@@ -395,6 +395,7 @@ Public Class MyMachGroupPanelM
          nPartId = EgtGetNextPart(nPartId)
       End While
       EgtResetCurrMachGroup()
+      Return ToRedrawMachGroupList
    End Function
 
    Friend Shared Function DuploGetToDelete(nSouId As Integer, ByRef bToDelete As Boolean) As Boolean

EgtBEAMWALL.Core/My Project/AssemblyInfo.vb

@@ -35,5 +35,5 @@ Imports System.Runtime.InteropServices
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.7.1")>
+<Assembly: AssemblyVersion("2.4.11.3")>
-<Assembly: AssemblyFileVersion("2.4.7.1")>
+<Assembly: AssemblyFileVersion("2.4.11.3")>

EgtBEAMWALL.Core/Utility/BTLIniFile.vb

@@ -159,7 +159,7 @@ Public Module BTLIniFile
                IpBTLParam = BTLParamM.CreateBTLParam(IpParentFeature, IsP, ParamType, sBTLParamParams(1), dMin, dMax, dDefault, sBTLParamParams(5))
                Return Not IsNothing(IpBTLParam)
             ElseIf sBTLParamParams(0) = "s" Then
-               IpBTLParam = BTLParamM.CreateBTLParam(IpParentFeature, IsP, BTLParamType.STRING_, sBTLParamParams(1), sBTLParamParams(5))
+               IpBTLParam = BTLParamM.CreateBTLParam(IpParentFeature, IsP, BTLParamType.STRING_, sBTLParamParams(1), sBTLParamParams(4), sBTLParamParams(5))
                Return Not IsNothing(IpBTLParam)
             ElseIf sBTLParamParams(0) = "c" Then
                Dim nMin As Integer
@@ -212,7 +212,7 @@ Public Module BTLIniFile
                IpBTLParam = BTLParamM.CreateBTLParam(IpParentFeature, IsP, ParamType, sBTLParamParams(1), dMin, dMax, dDefault, sBTLParamParams(5), sBWQParam)
                Return Not IsNothing(IpBTLParam)
             ElseIf sBTLParamParams(0) = "s" Then
-               IpBTLParam = BTLParamM.CreateBTLParam(IpParentFeature, IsP, BTLParamType.STRING_, sBTLParamParams(1), sBTLParamParams(5), sBWQParam)
+               IpBTLParam = BTLParamM.CreateBTLParam(IpParentFeature, IsP, BTLParamType.STRING_, sBTLParamParams(1), sBTLParamParams(4), sBTLParamParams(5), sBWQParam)
                Return Not IsNothing(IpBTLParam)
             ElseIf sBTLParamParams(0) = "c" Then
                Dim nMin As Integer

EgtBEAMWALL.DataLayer/App.config

@@ -19,7 +19,7 @@
         <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
             <dependentAssembly>
                 <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
-                <bindingRedirect oldVersion="0.0.0.0-8.0.29.0" newVersion="8.0.29.0" />
+                <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
             </dependentAssembly>
             <dependentAssembly>
                 <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />

EgtBEAMWALL.DataLayer/Controllers/DbController.cs

@@ -22,6 +22,8 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         {
             // Initialize database context for ADMIN
             adbCtx = new AdminContext(DbConfig.ADMIN_CONNECTION_STRING);
+            // DB standard utente
+            dbCtx = new AdminContext(DbConfig.CONNECTION_STRING);
         }
 
         #endregion Public Constructors
@@ -39,33 +41,10 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         {
             bool answ = false;
             string domain = isNetwork ? "%" : "localhost";
-            // ricerca utente...
+            answ = doCheckCreate(username, pwd, answ, domain, false);
-            var numUser = adbCtx
+            if (answ)
-                .UserList
-                .Where(x => x.User == username)
-                .ToList()
-                .Count;
-            if (numUser > 0)
             {
-                answ = true;
+                doGrantPriv(username, domain, "ALL ON *.*");
-            }
-            if (!answ)
-            {
-                // creo utente
-                string sqlCommand = "FLUSH PRIVILEGES;";
-                //string sqlCommand = $"CREATE USER '{username}'@'{domain}' IDENTIFIED BY '{pwd}'; GRANT ALL ON *.* TO '{username}'@'localhost'; FLUSH PRIVILEGES;";
-                //string sqlCommand = $"CREATE USER '{username}'@'{domain}' IDENTIFIED BY '{pwd}'; GRANT ALL ON *.* TO '{username}'@'localhost'; FLUSH PRIVILEGES;";
-                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
-                Thread.Sleep(100);
-                sqlCommand = $"CREATE USER '{username}'@'{domain}' IDENTIFIED BY '{pwd}';";
-                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
-                Thread.Sleep(100);
-                sqlCommand = $"GRANT ALL ON *.* TO '{username}'@'{domain}';";
-                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
-                Thread.Sleep(100);
-                sqlCommand = "FLUSH PRIVILEGES;";
-                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
-                Thread.Sleep(100);
             }
             return answ;
         }
@@ -85,6 +64,51 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             adbCtx.Dispose();
         }
 
+        /// <summary>
+        /// Verifica esistenza views + utente relativo eventualmente ricreandole + fornendo accesso
+        /// all'utente ReadOnly Essetre
+        /// </summary>
+        /// <param name="dbName"></param>
+        /// <param name="username"></param>
+        /// <param name="pwd"></param>
+        /// <returns></returns>
+        public bool refreshViews(string dbName, string username = "S3_User", string pwd = "S3_P4ssw0rd")
+        {
+            bool answ = false;
+
+            // in primis refresh delle view
+            string sqlCommand = @"CREATE OR REPLACE VIEW v_expProdRaw AS
+                                    SELECT DbId, AlarmDtEvent AS DtEvent, VarValue,
+                                    SUBSTRING_INDEX(VarValue, ';', 1) AS Prod,
+                                    SUBSTRING_INDEX(SUBSTRING_INDEX(VarValue, ';', 2), ';', -1) AS MachGroupId,
+                                    SUBSTRING_INDEX(SUBSTRING_INDEX(VarValue, ';', -2), ';', 1) AS PartId,
+                                    SUBSTRING_INDEX(VarValue, ';', -1) AS Status
+                                    FROM logmachine
+                                    WHERE ResultType = 1
+                                    AND VarAddress = 1;
+
+                                    CREATE OR REPLACE VIEW v_expProd AS
+                                    SELECT vp.DtEvent, vp.Prod, mgl.Name AS mgName, pl.PDN, vp.`Status`
+                                    FROM v_expProdRaw AS vp
+                                    INNER JOIN MachGroupList mgl ON vp.MachGroupId = mgl.Id
+                                    INNER JOIN partlist pl ON vp.PartId = pl.Id;";
+            dbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+            Thread.Sleep(100);
+
+            // ora setup parametri x utente
+            string domain = "%";
+
+            // ora controllo utente con diritti
+            answ = doCheckCreate(username, pwd, answ, domain, true);
+            if (answ)
+            {
+                doGrantPriv(username, domain, "USAGE ON *.*");
+                doGrantPriv(username, domain, $"SELECT ON {dbName}.v_expProd");
+            }
+
+            return answ;
+        }
+
         /// <summary>
         /// ATTENZIONE!!!! Procedura di Reset del DB
         /// </summary>
@@ -117,6 +141,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         #region Private Fields
 
         private AdminContext adbCtx;
+        private AdminContext dbCtx;
 
         /// <summary>
         /// Istanza logger
@@ -124,5 +149,79 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         private NLog.Logger Log = LogManager.GetCurrentClassLogger();
 
         #endregion Private Fields
+
+        #region Private Methods
+
+        /// <summary>
+        /// Procedura interna effettiva di check utente ed eventuale creazione + grant level
+        /// </summary>
+        /// <param name="username"></param>
+        /// <param name="pwd"></param>
+        /// <param name="answ"></param>
+        /// <param name="domain"></param>
+        /// <param name="force">Force = esegue un drop prima...</param>
+        /// <returns></returns>
+        private bool doCheckCreate(string username, string pwd, bool answ, string domain, bool force)
+        {
+            // ricerca utente...
+            var numUser = adbCtx
+                .UserList
+                .Where(x => x.User == username)
+                .ToList()
+                .Count;
+            if (numUser > 0)
+            {
+                answ = true;
+            }
+            if (!answ)
+            {
+                // creo utente
+                string sqlCommand = $"DROP USER  IF EXISTS {username};";
+                if (force)
+                {
+                    adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+                    Thread.Sleep(100);
+                }
+                sqlCommand = "FLUSH PRIVILEGES;";
+                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+                Thread.Sleep(100);
+                sqlCommand = $"CREATE USER '{username}'@'{domain}' IDENTIFIED BY '{pwd}';";
+                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+                Thread.Sleep(100);
+                sqlCommand = "FLUSH PRIVILEGES;";
+                adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+                Thread.Sleep(100);
+                answ = true;
+            }
+
+            return answ;
+        }
+
+        /// <summary>
+        /// Procedura interna effettiva di grant level x utente
+        /// </summary>
+        /// <param name="username"></param>
+        /// <param name="domain"></param>
+        /// <param name="grantLevel"></param>
+        /// <returns></returns>
+        private bool doGrantPriv(string username, string domain, string grantLevel)
+        {
+            bool answ = false;
+
+            string sqlCommand = "FLUSH PRIVILEGES;";
+            adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+            Thread.Sleep(100);
+            sqlCommand = $"GRANT {grantLevel} TO '{username}'@'{domain}';";
+            adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+            Thread.Sleep(100);
+            sqlCommand = "FLUSH PRIVILEGES;";
+            adbCtx.Database.ExecuteSqlCommand(System.Data.Entity.TransactionalBehavior.DoNotEnsureTransaction, sqlCommand);
+            Thread.Sleep(100);
+            answ = true;
+
+            return answ;
+        }
+
+        #endregion Private Methods
     }
 }

EgtBEAMWALL.DataLayer/DbConfig.cs

@@ -58,6 +58,19 @@ namespace EgtBEAMWALL.DataLayer
             return Controllers.DbController.man.checkCreateUser(DATABASE_USER, DATABASE_PWD, isNetwork);
         }
 
+        /// <summary>
+        /// Effettua verifica presenza view prod + relativo utente
+        /// </summary>
+        /// <param name="nKey"></param>
+        /// <param name="sKey"></param>
+        /// <param name="isNetwork"></param>
+        /// <returns></returns>
+        public static bool CheckViews(string nKey, string sKey)
+        {
+            // esecuzione script di install locale
+            return Controllers.DbController.man.refreshViews(DATABASE_NAME);
+        }
+
         /// <summary>
         /// Metodo di init standard per DB in rete con Master_Key
         /// </summary>

EgtBEAMWALL.DataLayer/Properties/AssemblyInfo.cs

@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.4.7.1")]
+[assembly: AssemblyVersion("2.4.11.3")]
-[assembly: AssemblyFileVersion("2.4.7.1")]
+[assembly: AssemblyFileVersion("2.4.11.3")]

EgtBEAMWALL.StressTest/App.config

@@ -8,7 +8,7 @@
         <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6"/>
         <providers>
 
-            <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.Entity.EF6, Version=6.10.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"></provider>
+            <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, Version=6.10.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"></provider>
         </providers>
     </entityFramework>
     <connectionStrings>

EgtBEAMWALL.Supervisor/AboutBoxWindow/AboutBoxV.xaml.vb

@@ -3,8 +3,7 @@ Imports EgtBEAMWALL.Core
 
 Public Class AboutBoxV
 
-   Private Sub AboutBoxWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+   Private Sub AboutBoxWD_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
-      Me.Owner = Application.Current.MainWindow
       DescriptionLbl.Text = My.Application.Info.Description.ToString()
       VersionLbl.Text = "Version : " & My.Application.Info.Version.Major.ToString() &
                                  "." & My.Application.Info.Version.Minor.ToString() &
@@ -25,6 +24,9 @@ Public Class AboutBoxV
       sInfo &= sKey & " - " & sKlev & " - " & sOpts & sLeftDays & Environment.NewLine
       sInfo &= "DataRoot " & Map.refMainWindowVM.MainWindowM.sDataRoot & Environment.NewLine
       sInfo &= "MachinesRoot " & Map.refMainWindowVM.MainWindowM.sMachinesRoot & Environment.NewLine
+      Dim sOpSys As String = String.Empty
+      EgtGetOsInfo( sOpSys)
+      sInfo &= sOpSys & Environment.NewLine
       Dim sCPU As String = String.Empty
       EgtGetCpuInfo( sCPU)
       sInfo &= sCPU & Environment.NewLine
@@ -32,7 +34,7 @@ Public Class AboutBoxV
       EgtGetSceneInfo(sScene)
       sInfo &= sScene
       InfoLbl.Text = sInfo
-      ExitBtn.Content = EgtMsg(constmsg.MSG_MISSINGKEYWD + 4)          'Ok
+      ExitBtn.Content = EgtMsg(MSG_MISSINGKEYWD + 4)          'Ok
    End Sub
 
 End Class

EgtBEAMWALL.Supervisor/CALCPanel/CALCPanelVM.vb

@@ -377,7 +377,8 @@ Public Class CALCPanelVM
                                                       .nProgramPage = ProjectType.PROD,
                                                       .nProjType = ProjType,
                                                       .bBarOk = True,
-                                                      .nMachineName = MachineName}
+                                                      .nMachineName = MachineName,
+                                                      .nGlobState = MachGroup.nGlobalState}
             Select Case MachGroup.nGlobalState
                Case Core.CalcStates.OK, Core.CalcStates.INFO
                   Bar.nCmdType = CalcIntegration.CmdTypes.GENERATE
@@ -500,7 +501,7 @@ Public Class CALCPanelVM
                                                   .bBarOk = True,
                                                   .nMachineName = MachineName,
                                                   .nCmdType = CalcIntegration.CmdTypes.SIMULATE}
-         If SelMachGroup.nGlobalState <> Core.CalcStates.OK Then
+         If SelMachGroup.nGlobalState = CalcStates.NOTCALCULATED Then
             Dim sMachGroupFilePath As String = Map.refSupervisorManagerVM.CurrProd.sProdDirPath & "\" & SelMachGroup.Name.ToString() & ".ori.bwe"
             If File.Exists(sMachGroupFilePath) Then File.Delete(sMachGroupFilePath)
          End If

EgtBEAMWALL.Supervisor/Comms/NUMAxiumComm.vb

@@ -501,7 +501,9 @@ Public Class NUMAxiumComm
 
    Private Sub objDGeneralFunction_ProgramActivated(ByVal nerrorCode As Short)
       EgtOutLog("Part program activated:" & " " & nerrorCode)
-      DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandTypes.SENDPROG, CommandStates.OK, ResultTypes.EXECUTED, "Part program activated:" & " " & nerrorCode))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandTypes.SENDPROG, CommandStates.OK, ResultTypes.EXECUTED, "Part program activated:" & " " & nerrorCode))
+      ' scrivo evento programma attivato
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachCommandLog(LogEvent.MachineCommands.PROGRAM_ACTIVATION, "", nerrorCode, DbControllers.SupervisorId))
    End Sub
 
    Private Sub objDGeneralFunction_OnCncStart(ByVal errorCode As Short)

EgtBEAMWALL.Supervisor/Comms/NUMAxiumPcToolkitComm.vb

@@ -255,11 +255,11 @@ Public Class NUMAxiumPcToolkitComm
          m_MachManaging.SetConnected(True)
          m_ResultCallbackDlg(CommandTypes.CONNECT, CommandStates.OK, ResultTypes.RESULT, "")
       End If
-      '''EgtOutLog("Activating program 9000")
+      'EgtOutLog("Activating program 9000")
 
       ' attivo programma main
       Map.refMachManaging.Num_Axium_PCToolkit.ActivateProg(9000)
-      '''EgtOutLog("Activated program 9000")
+      'EgtOutLog("Activated program 9000")
       Return True
    End Function
 
@@ -391,9 +391,11 @@ Public Class NUMAxiumPcToolkitComm
       nRes = WriteObjectVarious2(nPortFileTransfer, ACTIVE_PROG, PartProgramNumberActivate)
       If nRes <> 0 Then
          EgtOutLog("Error Activate Program: " & nRes.ToString())
-      Else
+         'Else
-         DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandTypes.SENDPROG, CommandStates.OK, ResultTypes.EXECUTED, "Part program activated:" & " " & PartProgramNumberActivate))
+         '   DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandTypes.SENDPROG, CommandStates.OK, ResultTypes.EXECUTED, "Part program activated:" & " " & PartProgramNumberActivate))
       End If
+      ' scrivo evento programma attivato
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachCommandLog(LogEvent.MachineCommands.PROGRAM_ACTIVATION, PartProgramNumberActivate, nRes <> 0, DbControllers.SupervisorId))
    End Sub
 
    Private Sub ChangeChannel(Channel As Short)
@@ -449,16 +451,16 @@ Public Class NUMAxiumPcToolkitComm
    End Sub
 
    Friend Sub CloseReadList()
-      '''objDPlcVariables.CloseReadList()
+      'objDPlcVariables.CloseReadList()
    End Sub
 
    Private Sub ReadVariablesOnce(Address As String)
       'Dim _ReadSymbolicPlcVariableOnetime As String = "Application.IOCONFIG_GLOBALS.Flexium_NCK.RCNC.General.Mode"
-      '''Dim _FXReturn As Int16 = objDPlcVariables.ReadVariablesOnce(10, Address)
+      'Dim _FXReturn As Int16 = objDPlcVariables.ReadVariablesOnce(10, Address)
 
-      '''If _FXReturn <> 0 Then
+      'If _FXReturn <> 0 Then
-      '''   EgtOutLog("Error ReadVariablesOnce:" & " " & _FXReturn.ToString())
+      '   EgtOutLog("Error ReadVariablesOnce:" & " " & _FXReturn.ToString())
-      '''End If
+      'End If
 
    End Sub
 
@@ -512,7 +514,7 @@ Public Class NUMAxiumPcToolkitComm
    End Sub
 
    Friend Sub CloseReadELS()
-      '''objDPlcVariables.CloseReadList()
+      'objDPlcVariables.CloseReadList()
    End Sub
 
    Public Sub RefreshAllVars()
@@ -574,11 +576,11 @@ Public Class NUMAxiumPcToolkitComm
                   Case "%R3.2"
                      nRet = ReadLadderVar(nPortVariables, R2, &H3, 1, MyData, SYN)
                      nRes = If(MyData.data(0) <> 0, 1, 0)
-                     '''EgtOutLog("Variabile: " & Var.sAddress & "DVal: " & nRes & " Valore: " & MyData.data(0) & "," & MyData.data(1) & "," & MyData.data(2) & "," & MyData.data(3))
+                     'EgtOutLog("Variabile: " & Var.sAddress & "DVal: " & nRes & " Valore: " & MyData.data(0) & "," & MyData.data(1) & "," & MyData.data(2) & "," & MyData.data(3))
                   Case "%R3.1"
                      nRet = ReadLadderVar(nPortVariables, R1, &H3, 1, MyData, SYN)
                      nRes = If(MyData.data(0) <> 0, 1, 0)
-                     '''EgtOutLog("Variabile: " & Var.sAddress & "DVal: " & nRes & " Valore: " & MyData.data(0) & "," & MyData.data(1) & "," & MyData.data(2) & "," & MyData.data(3))
+                     'EgtOutLog("Variabile: " & Var.sAddress & "DVal: " & nRes & " Valore: " & MyData.data(0) & "," & MyData.data(1) & "," & MyData.data(2) & "," & MyData.data(3))
                   Case "%V800.L"
                      nRet = ReadLadderVar(nPortVariables, VL, &H800, 4, MyData, SYN)
                      nRes = BitConverter.ToInt32(MyData.data, 0)
@@ -900,10 +902,11 @@ Public Class NUMAxiumPcToolkitComm
       Next
 
       For index As Integer = 0 To ErrorNumber.Count - 1
+         Dim Ind As Integer = index
          Dim NewMessageInList As ReadMessages = m_ReadFXMessages.FirstOrDefault(Function(x) x.CMsgCncNumber = 0.ToString() AndAlso
                                                                                             x.CMsgErrorType = 6.ToString() AndAlso
                                                                                             x.CMsgErrorIndex = "" AndAlso
-                                                                                            x.CMsgErrorNumber = ErrorNumber(index).ToString() AndAlso
+                                                                                            x.CMsgErrorNumber = ErrorNumber(Ind).ToString() AndAlso
                                                                                             x.CMsgErrorLine = "" AndAlso
                                                                                             x.CMsgErrorMessage = "")
          ' se il messaggio e' gia' in lista
@@ -1113,9 +1116,9 @@ Public Class NUMAxiumPcToolkitComm
    Friend Sub ReadCncMode()
       Dim nRet As Short = -1
       Dim nMode As UInt16
-      '''EgtOutLog("Pre ReadObjectVarious2")
+      'EgtOutLog("Pre ReadObjectVarious2")
       nRet = ReadObjectVarious2(nPortVariables, eVarious2.MODE, nMode, SYN)
-      '''EgtOutLog("ReadObjectVarious2 Ret: " & nRet & " Mode: " & nMode)
+      'EgtOutLog("ReadObjectVarious2 Ret: " & nRet & " Mode: " & nMode)
       If nRet <> 0 Then
          EgtOutLog("Reading CncMode failed! Error: " & nRet)
          Return

EgtBEAMWALL.Supervisor/Comms/NUMFlexiumComm.vb

@@ -53,7 +53,7 @@ Public Class NUMFlexiumComm
    Private m_ReadFXMessages As New List(Of ReadMessages)
    Private m_ReadOperatorMessages As New List(Of ReadMessages)
    ' lista variabili in lettura
-   Private Shared m_ReadingVars(100) As CommVar
+   Private Shared m_ReadingVars(230) As CommVar
    Private m_BytesTransferedCounter As Integer
    Private m_LinearAxisPrecision As Integer
 
@@ -368,6 +368,31 @@ Public Class NUMFlexiumComm
 
    Friend Sub FileDownload(sFileType As String, sFilePath As String)
       Dim _Return_Download As Short
+      '' leggo variabile E30099
+      'Dim SendPermissionVariable As Variable = Map.refMachCommandMessagePanelVM.MainVariablesList.FirstOrDefault(Function(x) x.sName = SENDPERMISSION)
+      'Dim dTemp As Double = 0
+      'Dim nSendPermission As Integer = 0
+      'EgtOutLog("Inizio invio programma")
+      'While nSendPermission <> 2
+      '   Dim bFirstWriteOne = True
+      '   EgtOutLog("Inizio ciclo verifica diverso da 2")
+      '   ' leggo valore
+      '   If Not IsNothing(SendPermissionVariable.sValue) Then
+      '      StringToDouble(SendPermissionVariable.sValue, dTemp)
+      '      Integer.TryParse(dTemp, nSendPermission)
+      '      EgtOutLog("Lettura variabile E30099: " & nSendPermission)
+      '   Else
+      '      EgtOutLog("nSendPermission = -1")
+      '      nSendPermission = -1
+      '   End If
+      '   ' se uguale a zero ci scrivo uno
+      '   If nSendPermission = 0 And bFirstWriteOne Then
+      '      bFirstWriteOne = False
+      '      SendPermissionVariable.sValue = 1
+      '      EgtOutLog("Scrittura variabile E30099 = 1")
+      '   End If
+      '   Threading.Thread.Sleep(1000)
+      'End While
 
       _Return_Download = objDFileTransfer.FileDownload2(10, sFileType, sFilePath, "", 1, 0)
 
@@ -451,7 +476,9 @@ Public Class NUMFlexiumComm
 
    Private Sub objDGeneralFunction_ProgramActivated(ByVal nerrorCode As Short)
       EgtOutLog("Part program activated:" & " " & nerrorCode)
-      DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandTypes.SENDPROG, CommandStates.OK, ResultTypes.EXECUTED, "Part program activated:" & " " & nerrorCode))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandTypes.SENDPROG, CommandStates.OK, ResultTypes.EXECUTED, "Part program activated:" & " " & nerrorCode))
+      ' scrivo evento programma attivato
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachCommandLog(LogEvent.MachineCommands.PROGRAM_ACTIVATION, "", nerrorCode, DbControllers.SupervisorId))
    End Sub
 
    Private Sub objDGeneralFunction_OnCncStart(ByVal errorCode As Short)

EgtBEAMWALL.Supervisor/Constants/ConstMachMsg.vb

@@ -3,5 +3,7 @@
    Public Const MDI_MSG As String = "MDI"
    Public Const PLC_MSG As String = "PLC"
    Public Const CNC_MSG As String = "CNC"
+   Public Const INPUT_MSG As String = "INPUT"
+   Public Const OUTPUT_MSG As String = "OUTPUT"
 
 End Module

EgtBEAMWALL.Supervisor/EgtBEAMWALL.Supervisor.vbproj

@@ -99,6 +99,9 @@
     <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
     <Prefer32Bit>false</Prefer32Bit>
   </PropertyGroup>
+  <PropertyGroup>
+    <ApplicationManifest>app.manifest</ApplicationManifest>
+  </PropertyGroup>
   <ItemGroup>
     <Reference Include="APLog">
       <HintPath>..\ExtLibs\APLog.dll</HintPath>
@@ -543,6 +546,7 @@
       <CustomToolNamespace>My.Resources</CustomToolNamespace>
     </EmbeddedResource>
     <None Include="app.config" />
+    <None Include="app.manifest" />
     <None Include="My Project\Settings.settings">
       <Generator>SettingsSingleFileGenerator</Generator>
       <LastGenOutput>Settings.Designer.vb</LastGenOutput>

EgtBEAMWALL.Supervisor/ItemParamList/RawPartListV.xaml

@@ -81,6 +81,13 @@
                                          RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:RawPartListV}}}"/>
             </DataGridTextColumn.Header>
          </DataGridTextColumn>
+         <!--PosZ - Posizione in Z-->
+         <DataGridTextColumn x:Key="colPOSZ" Binding="{Binding sPosZ}">
+            <DataGridTextColumn.Header>
+               <TextBlock Text="{Binding Path=DataContext.PosZ_Msg,
+                                         RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:RawPartListV}}}"/>
+            </DataGridTextColumn.Header>
+         </DataGridTextColumn>
          <!--MAT - Materiale-->
          <DataGridTextColumn x:Key="colMATERIAL" Binding="{Binding sMATERIAL}">
             <DataGridTextColumn.Header>

EgtBEAMWALL.Supervisor/ItemParamList/RawPartListVM.vb

@@ -13,6 +13,13 @@ Public Class RawPartListVM
       End Get
    End Property
 
+   Private m_colRawPart_PosZ As EgtDataGridColumn
+   Public ReadOnly Property colRawPart_PosZ As EgtDataGridColumn
+      Get
+         Return m_colRawPart_PosZ
+      End Get
+   End Property
+
    Private m_RawPartColumns As New ObservableCollection(Of EgtDataGridColumn)
    Public Property RawPartColumns As ObservableCollection(Of EgtDataGridColumn)
       Get
@@ -55,6 +62,12 @@ Public Class RawPartListVM
       End Get
    End Property
 
+   Public ReadOnly Property PosZ_Msg As String
+      Get
+         Return EgtMsg(61728)
+      End Get
+   End Property
+
    Public ReadOnly Property Material_Msg As String
       Get
          Return EgtMsg(61607)
@@ -84,23 +97,27 @@ Public Class RawPartListVM
       Map.SetRefRawPartListVM(Me)
       ' carico le colonne della datagrid
       GetPrivateProfileColumns(S_RAWPARTLIST_SUPERVISOR, RawPartColumns)
-      ' recupero riferimento a colonna StartCut
+      ' recupero riferimento a colonna StartCut e PosZ
       m_colRawPart_StartCut = m_RawPartColumns.FirstOrDefault(Function(x) x.Name = COL_STARTCUT)
+      m_colRawPart_PosZ = m_RawPartColumns.FirstOrDefault(Function(x) x.Name = COL_POSZ)
    End Sub
 
 #End Region    ' CONSTRUCTOR
 
    Friend Sub UpdateColumns(nMachType As MachineType)
       If nMachType = MachineType.BEAM Then
-         If Not IsNothing(m_colRawPart_StartCut) Then
-            m_colRawPart_StartCut.ColumnVisibility = Visibility.Visible
-         End If
-         'RawPartColumns.Clear()
-         'GetPrivateProfileColumns(S_RAWPARTLIST_BEAM, RawPartColumns)
          ' aggiorno la visibilità delle colonne
          For Each col In RawPartColumns
             col.ColumnVisibility = If(col.Visible, Visibility.Visible, Visibility.Collapsed)
          Next
+         If Not IsNothing(m_colRawPart_StartCut) Then
+            m_colRawPart_StartCut.ColumnVisibility = Visibility.Visible
+         End If
+         If Not IsNothing(m_colRawPart_PosZ) Then
+            m_colRawPart_PosZ.ColumnVisibility = Visibility.Collapsed
+         End If
+         'RawPartColumns.Clear()
+         'GetPrivateProfileColumns(S_RAWPARTLIST_BEAM, RawPartColumns)
       ElseIf nMachType = MachineType.WALL Then
          ' aggiorno la visibilità delle colonne
          For Each col In RawPartColumns
@@ -109,6 +126,9 @@ Public Class RawPartListVM
          If Not IsNothing(m_colRawPart_StartCut) Then
             m_colRawPart_StartCut.ColumnVisibility = Visibility.Collapsed
          End If
+         If Not IsNothing(m_colRawPart_PosZ) Then
+            m_colRawPart_PosZ.ColumnVisibility = Visibility.Visible
+         End If
          'RawPartColumns.Clear()
          'GetPrivateProfileColumns(S_RAWPARTLIST_WALL, RawPartColumns)
       End If

EgtBEAMWALL.Supervisor/LeftPanel/LeftPanelVM.vb

@@ -810,6 +810,8 @@ Public Class LeftPanelVM
          DbControllers.m_PartController.UpdateStatus(Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, Part.nPartId, ItemState.WIP)
          Part.dtStartTime = Time
          Part.nProduction_State = ItemState.WIP
+         ' scrivo evento inizio pezzo su DB
+         DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(Time - TimeSpan.FromSeconds(1), Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, Part.nPartId, 1, DbControllers.SupervisorId))
          ' se e' il primo ad essere lavorato
          If Not MachGroup.PartVMList.Any(Function(x) x IsNot Part AndAlso x.dtStartTime > DateTime.MinValue) Then
             ' se non e' gia' in coda per essere prodotto
@@ -837,6 +839,8 @@ Public Class LeftPanelVM
             MachGroup.dtStartTime = Time
             MachGroup.nProduction_State = ItemState.WIP
             MachGroup.NotifyPropertyChanged(NameOf(MachGroup.Production_Background))
+            ' scrivo evento inizio MachGroup su DB
+            DbControllers.m_LogMachineController.Create(LogEvent.CreateMachGroupStateLog(Time - TimeSpan.FromSeconds(1), Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, 1, DbControllers.SupervisorId))
             ' blocco produzione di tutti gli altri perche' iniziato questo
             MyMachGroupVM.UpdateProduceIsEnabledForAll()
          End If
@@ -846,6 +850,8 @@ Public Class LeftPanelVM
          DbControllers.m_PartController.UpdateStatus(Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, Part.nPartId, ItemState.Produced)
          Part.dtEndTime = Time
          Part.nProduction_State = ItemState.Produced
+         ' scrivo evento fine pezzo su DB
+         DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(Time, Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, Part.nPartId, 2, DbControllers.SupervisorId))
          If MachGroup.PartVMList.All(Function(x) x.nProduction_State >= ItemState.Produced) Then
             'aggiorno anche fine MachGroup
             DbControllers.m_MachGroupController.UpdateEnd(Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, Time)
@@ -861,6 +867,8 @@ Public Class LeftPanelVM
             NotifyPropertyChanged(NameOf(DoneRawPart_IsEnabled))
             NotifyPropertyChanged(NameOf(MoveRawPart_IsEnabled))
             NotifyPropertyChanged(NameOf(ResetRawPart_IsEnabled))
+            ' scrivo evento fine MachGroup su DB
+            DbControllers.m_LogMachineController.Create(LogEvent.CreateMachGroupStateLog(Time, Map.refSupervisorManagerVM.CurrProd.nProdId, MachGroup.Id, 2, DbControllers.SupervisorId))
             ' se avanzamento singolo, sblocco produzione di tutti gli altri
             If CurrentMachine.Flow = FlowTypes.ONEBYONE Then
                MyMachGroupVM.UpdateProduceIsEnabledForAll()

EgtBEAMWALL.Supervisor/MachCommandMessagePanel/MachCommandMessagePanelVM.vb

@@ -541,14 +541,18 @@ Public Class MachCommandMessagePanelVM
                      Map.refMachManaging.Num_Axium_APServer.GetGeneralFunctions()
                   End If
                End If
+               ' scrivo evento programma attivato
+               DbControllers.m_LogMachineController.Create(LogEvent.CreateMachCommandLog(LogEvent.MachineCommands.CONNECTION, "", 0, DbControllers.SupervisorId))
             End If
          Case CommandTypes.DISCONNECT
             If CommandState = CommandStates.OK Then
                _Connected = False
                NotifyPropertyChanged(NameOf(Connect_Background))
+               ' scrivo evento programma attivato
+               DbControllers.m_LogMachineController.Create(LogEvent.CreateMachCommandLog(LogEvent.MachineCommands.DISCONNECTION, "", 0, DbControllers.SupervisorId))
             End If
       End Select
-      DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandType, CommandState, ResultType, Params))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateResultLog(CommandType, CommandState, ResultType, Params))
    End Sub
    Friend Sub CloseCallbackDlg(ByRef bCancel As Boolean)
       ' serve?
@@ -615,7 +619,8 @@ Public Class MachCommandMessagePanelVM
          ' fermo timer degli allarmi
          m_AlarmTimer.Stop()
       End If
-      DbControllers.m_LogMachineController.Create(MachLog.CreateAlarmLog(AlarmOperation, AlarmType, AlarmMessage, AlarmCode, AlarmDateTime))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateAlarmLog(AlarmOperation, AlarmType, AlarmMessage, AlarmCode, AlarmDateTime))
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateAlarmLog(DateTime.Now(), AlarmOperation & LogEvent.cSeparator & AlarmType & LogEvent.cSeparator & AlarmMessage & LogEvent.cSeparator & AlarmCode & LogEvent.cSeparator & AlarmDateTime, DbControllers.m_SupervisorId))
    End Sub
 
    Friend Sub NUMAlarmCallbackDlg(ByVal CncNumber As Integer, ByVal AlarmOperation As Integer, ByVal ErrorTyp As String, ByVal ErrorIndex As String, ByVal ErrorNumber As String, ByVal ErrorLine As String, ByVal ErrorMessage As String, ByVal ErrorAdditional As String)
@@ -785,7 +790,8 @@ Public Class MachCommandMessagePanelVM
          ' fermo timer degli allarmi
          m_AlarmTimer.Stop()
       End If
-      DbControllers.m_LogMachineController.Create(MachLog.CreateAlarmLog(AlarmOperation, ErrorTyp, AlarmMessage, AlarmCode, DateTime.Now))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateAlarmLog(AlarmOperation, ErrorTyp, AlarmMessage, AlarmCode, DateTime.Now))
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateAlarmLog(DateTime.Now(), AlarmOperation & LogEvent.cSeparator & ErrorTyp & LogEvent.cSeparator & AlarmMessage & LogEvent.cSeparator & AlarmCode & LogEvent.cSeparator, DbControllers.m_SupervisorId))
    End Sub
 
    Friend Sub AxisCoordinatesCallbackDlg(AxisValue As Double, AxisIndex As Integer)
@@ -808,7 +814,8 @@ Public Class MachCommandMessagePanelVM
          Case NCTypes.NUM_FLEXIUM, NCTypes.NUM_AXIUM_APSERVER, NCTypes.NUM_AXIUM_PCTOOLKIT
             Map.refLeftPanelVM.SetOPState(NewState)
       End Select
-      DbControllers.m_LogMachineController.Create(MachLog.CreateOPStateLog(newOpState))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateOPStateLog(newOpState))
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachineStateLog(newOpState, DbControllers.m_SupervisorId))
    End Sub
 
    Friend Sub OpModeCallbackDlg(newOpState As Integer)
@@ -821,7 +828,8 @@ Public Class MachCommandMessagePanelVM
          Case NCTypes.NUM_FLEXIUM, NCTypes.NUM_AXIUM_APSERVER, NCTypes.NUM_AXIUM_PCTOOLKIT
             Map.refLeftPanelVM.SetOPMode(NewState)
       End Select
-      DbControllers.m_LogMachineController.Create(MachLog.CreateOPStateLog(newOpState))
+      'DbControllers.m_LogMachineController.Create(MachLog.CreateOPStateLog(newOpState))
+      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachineModeLog(newOpState, DbControllers.m_SupervisorId))
    End Sub
 
    Friend Sub ChannelCallbackDlg(NewChannelId As Short)
@@ -840,8 +848,9 @@ Public Class MachCommandMessagePanelVM
             Case "AsseX", "AsseY", "AsseZ", "AsseC", "AsseB"
                SetAxisValue(VarName, VarValue)
          End Select
+         'DbControllers.m_LogMachineController.Create(MachLog.CreateReadLog(CommandExecutedCorrectly, VarAddress, VarValue))
+         DbControllers.m_LogMachineController.Create(LogEvent.CreateReadVarLog(VarAddress, VarValue, DbControllers.SupervisorId))
       End If
-      DbControllers.m_LogMachineController.Create(MachLog.CreateReadLog(CommandExecutedCorrectly, VarAddress, VarValue))
    End Sub
 
    Private Sub SetAxisValue(VarName As String, VarValue As String)

EgtBEAMWALL.Supervisor/MachManagingThread/MachManaging.vb

@@ -362,7 +362,7 @@ Public Class MachManaging
                Case NCTypes.NUM_AXIUM_PCTOOLKIT
                   ' leggo tutte le variabili
                   Num_Axium_PCToolkit.RefreshAllVars()
-                  '''EgtOutLog("Post lettura variabili")
+                  'EgtOutLog("Post lettura variabili")
                   Dim dTemp As Double = 0
                   Dim nTemp As Integer = 0
                   If Not IsNothing(ResetVariable.sValue) Then
@@ -433,7 +433,7 @@ Public Class MachManaging
                   Else
                      nCurrMachIndex = -1
                   End If
-                  '''EgtOutLog("Post scrittura variabili lette")
+                  'EgtOutLog("Post scrittura variabili lette")
                   ' se indice lavorazione positivo, lo aggiorno
                   If nCurrMachIndex > 0 AndAlso nReset_State = 0 Then
                      m_nMachIndex = nCurrMachIndex
@@ -706,12 +706,12 @@ Public Class MachManaging
                   For VParIndex = 1 To sVs.Length - 1
                      Dim VPar() As String = sVs(VParIndex).Split("="c)
                      VPar(1) = VPar(1).Trim
-                     StringToDouble(VPar(1), dVPars(VParIndex))
+                     StringToDouble(VPar(1), dVPars(VParIndex - 1))
                   Next
                   ' li scrivo nel CN
                   For Index As Integer = 1 To 10
                      Dim sValue As String = ""
-                     DoubleToString(dVPars(Index), sValue)
+                     sValue = DoubleToString(dVPars(Index - 1), 2)
                      Tpa.RWVariableManager.WriteVarByName(VPAR & Index.ToString(), sValue)
                   Next
                   m_NextBarId = MyMachGroup.Id
@@ -1169,7 +1169,7 @@ Public Class MachManaging
       EgtUILib.GetPrivateProfileString(IpAppName, IpKeyName, "", sVariable, IpFileName)
       If String.IsNullOrWhiteSpace(sVariable) Then Return Nothing
       Dim sVariableValues() As String = sVariable.Split(","c)
-      If Not sVariableValues.Count >= 4 Then Return Nothing
+      'If Not sVariableValues.Count >= 4 Then Return Nothing
       For Index As Integer = 0 To sVariableValues.Count - 1
          sVariableValues(Index) = sVariableValues(Index).Trim()
       Next
@@ -1200,7 +1200,25 @@ Public Class MachManaging
          Case S_OUTPUTVARIABLES
             Paragraph = Paragraphs.OUTPUT
       End Select
-      Return New CommVar(sVariableValues(0), sVariableValues(1), ReadType, Type, Paragraph)
+      Dim sDescription As String = ""
+      If sVariableValues.Length >= 5 Then
+         Dim nDescription As Integer
+         If Integer.TryParse(sVariableValues(4), nDescription) Then
+            Dim MsgParagraph As MsgParagraphs
+            Select Case Paragraph
+               Case Paragraphs.INPUT
+                  MsgParagraph = MsgParagraphs.INPUT
+               Case Paragraphs.OUTPUT
+                  MsgParagraph = MsgParagraphs.OUTPUT
+               Case Else
+                  MsgParagraph = MsgParagraphs.INPUT
+            End Select
+            sDescription = MachMsg(MsgParagraph, nDescription)
+         Else
+            sDescription = sVariableValues(4)
+         End If
+      End If
+      Return New CommVar(sVariableValues(0), sVariableValues(1), ReadType, Type, Paragraph, sDescription)
    End Function
 
    Private Sub ReadPLCMessages()

EgtBEAMWALL.Supervisor/MachManagingThread/RWVariableManager.vb

@@ -59,7 +59,7 @@ Public Class RWVariableManager
 
    Public Shared Function InitVar(Name As String, Address As String, Type As CommVar.ReadTypes) As Integer
       Dim Index As Integer = Array.IndexOf(m_ReadingVars, Nothing)
-      m_ReadingVars(Index) = New CommVar(Name, Address, Type, CommVar.Types.NULL, CommVar.Paragraphs.NULL)
+      m_ReadingVars(Index) = New CommVar(Name, Address, Type, CommVar.Types.NULL, CommVar.Paragraphs.NULL, "")
       Return Index
    End Function
 
@@ -101,7 +101,7 @@ Public Class RWVariableManager
          Case S_OUTPUTVARIABLES
             Paragraph = Paragraphs.OUTPUT
       End Select
-      Return New CommVar(sVariableValues(0), sVariableValues(1), Type, CommVar.Types.NULL, Paragraph)
+      Return New CommVar(sVariableValues(0), sVariableValues(1), Type, CommVar.Types.NULL, Paragraph, "")
    End Function
 
    Public Sub RefreshVar(Name As String)
@@ -266,6 +266,7 @@ Public Class CommVar
          m_sName = value
       End Set
    End Property
+
    Private m_sAddress As String
    Public Property sAddress As String
       Get
@@ -275,12 +276,14 @@ Public Class CommVar
          m_sAddress = value
       End Set
    End Property
+
    Private m_nReadType As ReadTypes
    Public ReadOnly Property nReadType As ReadTypes
       Get
          Return m_nReadType
       End Get
    End Property
+
    Private m_nType As Types
    Public ReadOnly Property nType As Types
       Get
@@ -306,6 +309,13 @@ Public Class CommVar
       If bNewValue Then RaiseEvent NewValue(Me, New NewValueEventArgs(Value))
    End Sub
 
+   Private m_sDescription As String
+   Public ReadOnly Property sDescription As String
+      Get
+         Return m_sDescription
+      End Get
+   End Property
+
    Private m_bReaded As Boolean
    Public ReadOnly Property bReaded As Boolean
       Get
@@ -324,12 +334,13 @@ Public Class CommVar
    ' indice usato in liste lettura NUM
    Friend Index As Integer = -1
 
-   Sub New(Name As String, Address As String, ReadType As ReadTypes, Type As Types, Paragraph As Paragraphs)
+   Sub New(Name As String, Address As String, ReadType As ReadTypes, Type As Types, Paragraph As Paragraphs, sDescription As String)
       m_sName = Name
       m_sAddress = Address
       m_nReadType = ReadType
       m_nType = Type
       m_Paragraph = Paragraph
+      m_sDescription = sDescription
    End Sub
 
    Friend Sub ResetReading()

EgtBEAMWALL.Supervisor/MachineLogPage/MachineLogPageV.xaml

@@ -24,6 +24,26 @@
          </Button>
       </Grid>
 
+      <StackPanel Orientation="Horizontal" Height="30">
+         <ComboBox ItemsSource="{Binding EntityTypeList}"
+                   SelectedIndex="{Binding SelEntityType}"
+                   Width="70"
+                   Margin="0,0,2.5,0"
+                   Style="{StaticResource PartParam_ComboBox}"/>
+         <ComboBox ItemsSource="{Binding PartEventTypeList}"
+                   SelectedIndex="{Binding SelPartEventType}"
+                   Width="70"
+                   Margin="0,0,2.5,0"
+                   Style="{StaticResource PartParam_ComboBox}"/>
+         <!--<TextBox Text="{Binding MaxRowNumber}"/>-->
+         <Button Grid.Column="1"
+                 Command="{Binding Refresh_Command}"
+                 Margin="2.5,0,5,0"
+                 Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/MDIPage/Send.png" Stretch="Uniform"/>
+         </Button>
+      </StackPanel>
+
       <EgtBEAMWALLCORE:EgtDataGrid ItemsSource="{Binding MachineLogList}"
                                    Grid.Row="1"
                                    AutoGenerateColumns="False"
@@ -37,7 +57,8 @@
                                    BindingColumns="{Binding MachineLogColumns}">
          <DataGrid.Resources>
             <!-- Data/ora -->
-            <DataGridTextColumn x:Key="colDATETIME" Binding="{Binding sEventDateTime}">
+            <DataGridTextColumn x:Key="colDATETIME" Binding="{Binding sEventDateTime}"
+                                SortMemberPath="sEventTick">
                <DataGridTextColumn.HeaderTemplate>
                   <DataTemplate>
                      <TextBlock Text="{Binding Path=DataContext.EventDateTime_Msg,
@@ -61,7 +82,7 @@
                      <TextBlock Text="{Binding Path=DataContext.EventValue_Msg,
                                             RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:MachineLogPageV}}}"/>
                   </DataTemplate>
-                  </DataGridTextColumn.HeaderTemplate>
+               </DataGridTextColumn.HeaderTemplate>
             </DataGridTextColumn>
             <!-- SupervisorId -->
             <DataGridTextColumn x:Key="colSUPERVISORID" Binding="{Binding SupervisorId}">
@@ -91,7 +112,7 @@
             <DataGridTextColumn x:Key="colPART" Binding="{Binding PartId}">
                <DataGridTextColumn.HeaderTemplate>
                   <DataTemplate>
-                  <TextBlock Text="{Binding Path=DataContext.PartId_Msg,
+                     <TextBlock Text="{Binding Path=DataContext.PartId_Msg,
                                             RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:MachineLogPageV}}}"/>
                   </DataTemplate>
                </DataGridTextColumn.HeaderTemplate>

EgtBEAMWALL.Supervisor/MachineLogPage/MachineLogPageVM.vb

@@ -62,6 +62,42 @@ Public Class MachineLogPageVM
       End Set
    End Property
 
+   Private m_PartEventTypeList As New List(Of String)({"", "Inizio", "Fine"})
+   Public ReadOnly Property PartEventTypeList As List(Of String)
+      Get
+         Return m_PartEventTypeList
+      End Get
+   End Property
+
+   Private m_SelPartEventType As Integer
+   Public Property SelPartEventType As Integer
+      Get
+         Return m_SelPartEventType
+      End Get
+      Set(value As Integer)
+         m_SelPartEventType = value
+         m_MachineLogList_View.Refresh()
+      End Set
+   End Property
+
+   Private m_EntityTypeList As New List(Of String)({"", "Pezzo", "Barra"})
+   Public ReadOnly Property EntityTypeList As List(Of String)
+      Get
+         Return m_EntityTypeList
+      End Get
+   End Property
+
+   Private m_SelEntityType As Integer
+   Public Property SelEntityType As Integer
+      Get
+         Return m_SelEntityType
+      End Get
+      Set(value As Integer)
+         m_SelEntityType = value
+         m_MachineLogList_View.Refresh()
+      End Set
+   End Property
+
    ' Definizione comandi
    Private m_cmdRefresh As ICommand
 
@@ -139,16 +175,34 @@ Public Class MachineLogPageVM
 
    Private Function MachineLogFilter(LogEvent As Object) As Boolean
       Dim CurrLogEvent As LogEvent = DirectCast(LogEvent, LogEvent)
+      Dim bOk As Boolean = True
+      Select Case m_SelEntityType
+         Case 0
+            bOk = bOk And True
+         Case 1
+            bOk = bOk And CurrLogEvent.EventType = MachLogTypes.PART_STATUS
+         Case 2
+            bOk = bOk And CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS
+      End Select
+      If CurrLogEvent.EventType = MachLogTypes.PART_STATUS OrElse CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS Then
+         Select Case m_SelPartEventType
+            Case 0
+               bOk = bOk And True
+            Case 1
+               bOk = bOk And CurrLogEvent.nStatus = 1
+            Case 2
+               bOk = bOk And CurrLogEvent.nStatus = 2
+         End Select
+      End If
       ' se livello utente inferiore a 5, mostro solo eventi pezzo e machgroup
       If Map.refMainWindowVM.MainWindowM.nUserLevel < 5 Then
-         If CurrLogEvent.EventType = MachLogTypes.PART_STATUS Then
+         bOk = bOk And CurrLogEvent.EventType = MachLogTypes.PART_STATUS OrElse CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS
-            Return True
-         Else
-            Return False
-         End If
       Else
-         Return True
+         If Not CurrLogEvent.EventType = MachLogTypes.PART_STATUS AndAlso Not CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS Then
+            bOk = True
+         End If
       End If
+      Return bOk
    End Function
 
    Friend Sub LoadMachineLogList()
@@ -157,6 +211,12 @@ Public Class MachineLogPageVM
          m_colMachineLog_Description.ColumnVisibility = Visibility.Collapsed
          m_colMachineLog_SupervisorId.ColumnVisibility = Visibility.Collapsed
       End If
+      UpdateMachineLogList()
+      m_MachineLogList_View = CollectionViewSource.GetDefaultView(m_MachineLogList)
+      m_MachineLogList_View.Filter = AddressOf MachineLogFilter
+   End Sub
+
+   Friend Sub UpdateMachineLogList()
       m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Now - TimeSpan.FromDays(300), DateTime.Now).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
       NotifyPropertyChanged(NameOf(MachineLogList))
       m_MachineLogList_View = CollectionViewSource.GetDefaultView(m_MachineLogList)
@@ -185,7 +245,7 @@ Public Class MachineLogPageVM
    ''' Execute the Open.  This method is invoked by the OpenCommand.
    ''' </summary>
    Friend Sub Refresh()
-      m_MachineLogList_View.Refresh()
+      UpdateMachineLogList()
    End Sub
 
 #End Region ' Refresh
@@ -195,6 +255,7 @@ Public Class MachineLogPageVM
 End Class
 
 Public Class MachLogType
+   Inherits VMBase
 
    Private m_nId As Integer
    Public ReadOnly Property nId As Integer

EgtBEAMWALL.Supervisor/MainWindow/MainWindowM.vb

@@ -3,6 +3,7 @@ Imports System.Math
 Imports EgtUILib
 Imports EgtWPFLib5
 Imports EgtBEAMWALL.Core
+Imports System.IO
 
 Public Class MainWindowM
 
@@ -18,6 +19,13 @@ Public Class MainWindowM
       End Get
    End Property
 
+   Private m_sDataDir As String = String.Empty
+   Friend ReadOnly Property sDataDir As String
+      Get
+         Return m_sDataDir
+      End Get
+   End Property
+
    Private m_sConfigDir As String = String.Empty
    Public ReadOnly Property sConfigDir As String
       Get
@@ -190,6 +198,8 @@ Public Class MainWindowM
       IniFile.m_sIniFile = m_sConfigDir & "\" & Core.ConstIni.INI_FILE_NAME
       ' Impostazione path BTL Ini File
       BTLIniFile.m_sBTLIniFile = m_sConfigDir & "\" & BTLFEATURES_FILE_NAME
+      ' Impostazione path Ini file DataGrid
+      DataGridColumnsIniFile.m_sDataGridColumnsIniFile = m_sConfigDir & "\" & DATAGRIDCOLUMNS_FILE_NAME
       ' Impostazione path Ini file Dimensioni
       DimensionsIniFile.m_sDimensionsIniFile = m_sConfigDir & "\" & ConstDims.DIMENSIONS_FILE_NAME
       ' Impostazione path resources dir
@@ -209,13 +219,10 @@ Public Class MainWindowM
       If GetMainPrivateProfileString(S_WALL, K_WALLBASEDIR, "", m_sWallRoot) = 0 Then
          m_sWallRoot = m_sDataRoot & "\" & WALL_DIR
       End If
-      m_sProjsDir = m_sDataRoot & "\" & PROJS_DIR
+      ' Impostazione direttorio magazzino grezzi
-      m_sProdsDir = m_sDataRoot & "\" & PRODS_DIR
+      If GetMainPrivateProfileString(S_GENERAL, K_DATADIR, "", m_sDataDir) = 0 Then
-      m_sWarehouseRoot = m_sDataRoot & "\" & WAREHOUSE_DIR
+         m_sDataDir = m_sDataRoot
-      ' imposto cartelle dei progetti
+      End If
-      ProjectFileVM.Init(sProjsDir, sProdsDir)
-      ' Impostazione path Ini file DataGrid
-      Core.DataGridColumnsIniFile.m_sDataGridColumnsIniFile = m_sConfigDir & "\" & DATAGRIDCOLUMNS_FILE_NAME
       ' Verifico indice di istanza
       ManageInstance()
       ' Imposto tipo di chiave
@@ -233,8 +240,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2407, 1, m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2411, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2407, 1, m_nKeyOptions)
+                            EgtGetKeyOptions(5327, 2411, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & SUPGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())
@@ -387,6 +394,30 @@ Public Class MainWindowM
       Core.ProjectFileVM.Init(sProjsDir, sProdsDir)
    End Sub
 
+   Friend Sub UpdatePathForKey(sKey As String)
+      m_sProjsDir = m_sDataDir & "\" & sKey & "\" & PROJS_DIR
+      m_sProdsDir = m_sDataDir & "\" & sKey & "\" & PRODS_DIR
+      If Not Directory.Exists(m_sDataDir & "\" & sKey) Then
+         Directory.CreateDirectory(m_sDataDir & "\" & sKey & "\" & PROJS_DIR)
+         Directory.CreateDirectory(m_sDataDir & "\" & sKey & "\" & PRODS_DIR)
+      End If
+      ' imposto cartelle dei progetti
+      Core.ProjectFileVM.Init(sProjsDir, sProdsDir)
+   End Sub
+
+   Friend Function GetKeyNumber() As Integer
+      Dim sKey As String = ""
+      Dim nKey As Integer = 0
+      EgtGetKeyInfo(sKey)
+      sKey = sKey.Replace(" ", "")
+      If Not IsNothing(sKey) AndAlso sKey.Length > 11 Then
+         If Integer.TryParse(sKey.Substring(3, 6), nKey) AndAlso nKey > 0 Then
+            Return nKey
+         End If
+      End If
+      Return -1
+   End Function
+
    Friend Sub Close()
       ' Terminazione generale di EgtInterface
       EgtExit()

EgtBEAMWALL.Supervisor/My Project/AssemblyInfo.vb

@@ -11,8 +11,23 @@ Imports System.Windows
 
 ' Review the values of the assembly attributes
 
-<Assembly: AssemblyTitle("EgtBEAMWALL.Supervisor")>
+#If PLATFORM = "x64" Then
-<Assembly: AssemblyDescription("")>
+#If DEBUG Then
+<Assembly: AssemblyTitle("EgtBEAMWALL.SupervisorD64.exe")>
+<Assembly: AssemblyDescription("EgtBEAMWALL S Debug 32 bit")>
+#Else
+<Assembly: AssemblyTitle("EgtBEAMWALL.SupervisorR64.exe")>
+<Assembly: AssemblyDescription("EgtBEAMWALL S 32 bit")>
+#End if
+#Else
+#If DEBUG Then
+<Assembly: AssemblyTitle("EgtBEAMWALL.SupervisorD32.exe")>
+<Assembly: AssemblyDescription("EgtBEAMWALL S Debug 32 bit")>
+#Else
+<Assembly: AssemblyTitle("EgtBEAMWALL.SupervisorR32.exe")>
+<Assembly: AssemblyDescription("EgtBEAMWALL S 32 bit")>
+#End if
+#End if
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Supervisor")>
 <Assembly: AssemblyCopyright("Copyright ©  2020-2022 by Egalware s.r.l.")>
@@ -55,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.7.1")>
+<Assembly: AssemblyVersion("2.4.11.3")>
-<Assembly: AssemblyFileVersion("2.4.7.1")>
+<Assembly: AssemblyFileVersion("2.4.11.3")>

EgtBEAMWALL.Supervisor/Project/ProjectVM.vb

@@ -28,7 +28,7 @@ Public Class ProjectVM
          If m_SelTabPage = TabPages.MACHINELOG Then
             Map.refCALCPanelVM.SetMachineLog(False)
          End If
-         If SelTabPage Then
+         If SelTabPage = TabPages.MACHINELOG Then
             Map.refMachineLogPageVM.LoadMachineLogList()
          End If
          m_SelTabPage = SelTabPage

EgtBEAMWALL.Supervisor/SupervisorManager/SupervisorManagerVM.vb

@@ -77,21 +77,21 @@ Public Class SupervisorManagerVM
    'Private m_cmdSave As ICommand
    Private m_cmdGoToProd As ICommand
 
-   '#Region "ToolTip"
+   #Region "ToolTip"
 
-   '   'Proprietà ToolTip
+      'Proprietà ToolTip
-   '   Public ReadOnly Property OpenToolTip As String
+      Public ReadOnly Property OpenToolTip As String
-   '      Get
+         Get
-   '         Return EgtMsg(MSG_TOPCOMMANDBAR + 2)
+            Return EgtMsg(MSG_TOPCOMMANDBAR + 2)
-   '      End Get
+         End Get
-   '   End Property
+      End Property
-   '   Public ReadOnly Property SaveToolTip As String
+      Public ReadOnly Property GoToProd_ToolTip As String
-   '      Get
+         Get
-   '         Return EgtMsg(MSG_TOPCOMMANDBAR + 3)
+            Return EgtMsg(61835)
-   '      End Get
+         End Get
-   '   End Property
+      End Property
 
-   '#End Region ' ToolTip
+   #End Region ' ToolTip
 
 #End Region    ' Fields & Properties
 
@@ -219,6 +219,8 @@ Public Class SupervisorManagerVM
             CurrProd = Nothing
             Map.refMainWindowVM.UpdateTitle()
             m_bLoadingProd = False
+            NotifyPropertyChanged(NameOf(MruFileNames))
+            LoadingWndHelper.CloseLoadingWnd(ActiveIds.OPENPROD)
             Return
          End If
          LoadingWndHelper.OpenLoadingWnd(ActiveIds.OPENPROD, 3, EgtMsg(63000), EgtMsg(63001), 50)        'Project opening        'Loading project geometries
@@ -239,11 +241,19 @@ Public Class SupervisorManagerVM
             MessageBox.Show("Impossibile aprire il file!!")
             Map.refSceneHostVM.MainController.NewProject()
             Map.refMainWindowVM.SetTitle("New - EgtBEAMWALL")
+            m_bLoadingProd = False
+            NotifyPropertyChanged(NameOf(MruFileNames))
+            LoadingWndHelper.CloseLoadingWnd(ActiveIds.OPENPROD)
+            Return
          End If
       Else
          MessageBox.Show("File non trovato!!")
          Map.refSceneHostVM.MainController.NewProject()
          Map.refMainWindowVM.SetTitle("New - EgtBEAMWALL")
+         m_bLoadingProd = False
+         NotifyPropertyChanged(NameOf(MruFileNames))
+         LoadingWndHelper.CloseLoadingWnd(ActiveIds.OPENPROD)
+         Return
       End If
       LoadingWndHelper.UpdateLoadingWnd(ActiveIds.OPENPROD, 3, EgtMsg(63004), 70, 100)          ' Loading production data
       Map.refProjectVM.SupervisorMachGroupPanelVM = New SupervisorMachGroupPanelVM(MachGroupPanelM.CreateNewMachGroupPanel())

EgtBEAMWALL.Supervisor/Utility/CurrentMachine.vb

@@ -16,6 +16,8 @@ Public Module CurrentMachine
       MDI = 1
       PLC = 2
       CNC = 3
+      INPUT = 4
+      OUTPUT = 5
    End Enum
 
    ' Nome macchina corrente
@@ -305,6 +307,10 @@ Public Module CurrentMachine
             sPar = PLC_MSG
          Case MsgParagraphs.CNC
             sPar = CNC_MSG
+         Case MsgParagraphs.INPUT
+            sPar = INPUT_MSG
+         Case MsgParagraphs.OUTPUT
+            sPar = OUTPUT_MSG
       End Select
       EgtGetStringUtf8FromIni(sPar, nId, nId, sMsg, m_sMachMessagesFile)
       Return sMsg

EgtBEAMWALL.Supervisor/Utility/DbControllers.vb

@@ -4,81 +4,99 @@ Imports EgtBEAMWALL.Core
 
 Module DbControllers
 
-    Friend m_SupervisorId As String = "1"
+   Friend m_SupervisorId As String = "1"
-    Public ReadOnly Property SupervisorId As String
+   Public ReadOnly Property SupervisorId As String
-        Get
+      Get
-            Return m_SupervisorId
+         Return m_SupervisorId
-        End Get
+      End Get
-    End Property
+   End Property
 
-    Public m_ProjController As DataLayer.Controllers.ProjController
+   Private m_bNetwork As Boolean = False
-    Public m_ProdController As DataLayer.Controllers.ProdController
+   Friend ReadOnly Property bNetwork As Boolean
-    Public m_MachGroupController As DataLayer.Controllers.MachGroupController
+      Get
-    Public m_PartController As DataLayer.Controllers.PartController
+         Return m_bNetwork
-    Public m_LogMachineController As DataLayer.Controllers.LogMachineController
+      End Get
-    Public m_StatusMapController As DataLayer.Controllers.StatusMapController
+   End Property
 
-    Sub New()
+   Public m_ProjController As DataLayer.Controllers.ProjController
+   Public m_ProdController As DataLayer.Controllers.ProdController
+   Public m_MachGroupController As DataLayer.Controllers.MachGroupController
+   Public m_PartController As DataLayer.Controllers.PartController
+   Public m_LogMachineController As DataLayer.Controllers.LogMachineController
+   Public m_StatusMapController As DataLayer.Controllers.StatusMapController
 
-        ' se demo--> server = db.steamware.net, nKey e sKey come le hai...
+   Sub New()
 
-        Dim sKey = "", sUser = "", sPwd = ""
+      ' se demo--> server = db.steamware.net, nKey e sKey come le hai...
 
-        EgtGetKeyInfo(sKey)
+      Dim sKey = "", sUser = "", sPwd = ""
-        sKey = sKey.Replace(" ", "")
+
-        If Not IsNothing(sKey) AndAlso sKey.Length > 11 Then
+      EgtGetKeyInfo(sKey)
-            sUser = sKey.Substring(3, 6)
+      sKey = sKey.Replace(" ", "")
-            sPwd = sKey.Substring(10, sKey.Length - 10).Replace("(", "").Replace(")", "")
+      If Not IsNothing(sKey) AndAlso sKey.Length > 11 Then
-        End If
+         sUser = sKey.Substring(3, 6)
-        Try
+         sPwd = sKey.Substring(10, sKey.Length - 10).Replace("(", "").Replace(")", "")
-            Dim DbAddress As String = "127.0.0.1"
+      End If
-            Dim DbMasterKey As Integer = 0
+      Try
-            Dim sDbMasterKey As String = ""
+         Dim DbAddress As String = "127.0.0.1"
-            Dim sSharedFolder As String = ""
+         Dim DbMasterKey As Integer = 0
-            Dim bNetwork As Boolean = False
+         Dim sDbMasterKey As String = ""
-            If Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) Then
+         Dim sSharedFolder As String = ""
-                GetMainPrivateProfileString(S_GENERAL, K_DBADDRESS, "", DbAddress)
+         If Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) Then
-                DbMasterKey = GetMainPrivateProfileInt(S_GENERAL, K_DBMASTERKEY, 0)
+            GetMainPrivateProfileString(S_GENERAL, K_DBADDRESS, "", DbAddress)
-                If DbMasterKey > 0 Then
+            DbMasterKey = GetMainPrivateProfileInt(S_GENERAL, K_DBMASTERKEY, 0)
-                    sDbMasterKey = DbMasterKey.ToString("000000")
+            If DbMasterKey > 0 Then
-                End If
+               sDbMasterKey = DbMasterKey.ToString("000000")
-                If String.IsNullOrWhiteSpace(DbAddress) OrElse DbMasterKey <= 0 Then
-                    DbAddress = "127.0.0.1"
-                    DbMasterKey = 0
-                Else
-                    bNetwork = True
-                End If
             End If
-            DataLayer.DbConfig.InitDb(DbAddress, sUser, sPwd, sDbMasterKey)
+            If String.IsNullOrWhiteSpace(DbAddress) OrElse DbMasterKey <= 0 Then
-            DataLayer.DbConfig.SetupLogDir(Map.refMainWindowVM.MainWindowM.sTempDir)
+               DbAddress = "127.0.0.1"
-            DataLayer.DbConfig.CheckMigrateDb()
+               DbMasterKey = 0
-            DataLayer.DbConfig.CheckUser(sUser, sPwd, Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK))
+            Else
-            If Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) And bNetwork Then
+               m_bNetwork = True
-                ' imposto cartella condivisa
-                GetMainPrivateProfileString(S_GENERAL, K_SHAREDFOLDER, Map.refMainWindowVM.MainWindowM.sDataRoot, sSharedFolder)
-                Map.refMainWindowVM.MainWindowM.UpdatePathForNetwork(sSharedFolder)
-                Dim sSupervisorMachName As String = ""
-                GetMainPrivateProfileString(S_MACH, K_SUPERVISORMACH, "", sSupervisorMachName)
-                If Not String.IsNullOrWhiteSpace(sSupervisorMachName) Then m_SupervisorId = sSupervisorMachName
             End If
-        Catch ex As Exception
+         End If
-            EgtOutLog("InitDb error: " & ex.ToString())
+         If Not m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ANY_DB) Then
-            MessageBox.Show(Application.Current.MainWindow, "Db connection error!!", "Error")
+            DbMasterKey = GetMainPrivateProfileInt(S_GENERAL, K_DBMASTERKEY, 0)
-            End
+            If DbMasterKey > 0 Then
-        End Try
+               sDbMasterKey = DbMasterKey.ToString("000000")
-
+            End If
-        If Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) Then
+         ElseIf GetMainPrivateProfileInt(S_GENERAL, K_DBMASTERKEY, 0) = 0 Then
+            Dim nKey As Integer = 0
+            If Integer.TryParse(sKey.Substring(3, 6), nKey) AndAlso nKey > 0 Then
+               WriteMainPrivateProfileString(S_GENERAL, K_DBMASTERKEY, nKey)
+            End If
+         End If
+         DataLayer.DbConfig.InitDb(DbAddress, sUser, sPwd, sDbMasterKey)
+         DataLayer.DbConfig.SetupLogDir(Map.refMainWindowVM.MainWindowM.sTempDir)
+         DataLayer.DbConfig.CheckMigrateDb()
+         DataLayer.DbConfig.CheckUser(sUser, sPwd, m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK))
+         DataLayer.DbConfig.CheckViews(sUser, sPwd)
+         If m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) Then
+            ' imposto cartella condivisa
+            GetMainPrivateProfileString(S_GENERAL, K_SHAREDFOLDER, Map.refMainWindowVM.MainWindowM.sDataRoot, sSharedFolder)
+            Map.refMainWindowVM.MainWindowM.UpdatePathForNetwork(sSharedFolder)
             Dim sSupervisorMachName As String = ""
             GetMainPrivateProfileString(S_MACH, K_SUPERVISORMACH, "", sSupervisorMachName)
             If Not String.IsNullOrWhiteSpace(sSupervisorMachName) Then m_SupervisorId = sSupervisorMachName
-        End If
+         ElseIf Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ANY_DB) Then
+            ' imposto cartella chiave master
+            Map.refMainWindowVM.MainWindowM.UpdatePathForKey(sDbMasterKey)
+         Else
+            ' imposto cartella chiave locale
+            Map.refMainWindowVM.MainWindowM.UpdatePathForKey(sKey.Substring(3, 6))
+         End If
+      Catch ex As Exception
+         EgtOutLog("InitDb error: " & ex.ToString())
+         MessageBox.Show(Application.Current.MainWindow, "Db connection error!!", "Error")
+         End
+      End Try
 
-        m_ProjController = New DataLayer.Controllers.ProjController
+      m_ProjController = New DataLayer.Controllers.ProjController
-        m_ProdController = New DataLayer.Controllers.ProdController
+      m_ProdController = New DataLayer.Controllers.ProdController
-        m_MachGroupController = New DataLayer.Controllers.MachGroupController
+      m_MachGroupController = New DataLayer.Controllers.MachGroupController
-        m_PartController = New DataLayer.Controllers.PartController
+      m_PartController = New DataLayer.Controllers.PartController
-        m_LogMachineController = New DataLayer.Controllers.LogMachineController
+      m_LogMachineController = New DataLayer.Controllers.LogMachineController
-        m_StatusMapController = New DataLayer.Controllers.StatusMapController
+      m_StatusMapController = New DataLayer.Controllers.StatusMapController
-    End Sub
+   End Sub
 
 End Module

EgtBEAMWALL.Supervisor/Utility/LogEvent.vb

@@ -4,13 +4,7 @@ Imports EgtBEAMWALL.Core
 Public Class LogEvent
    Inherits VMBase
 
-   Public ReadOnly Property MachGroupId_Msg As String
+   Public Const cSeparator As Char = ";"c
-      Get
-         Return "MachGroup"
-      End Get
-   End Property
-
-   Const cSeparator As Char = ";"c
 
    Public Enum MachLogTypes
       PART_STATUS = 1
@@ -25,6 +19,12 @@ Public Class LogEvent
       PROGRAM_SEND = 10
    End Enum
 
+   Public Enum MachineCommands As Integer
+      CONNECTION = 1
+      DISCONNECTION = 2
+      PROGRAM_ACTIVATION = 3
+   End Enum
+
    Private m_EventDateTime As DateTime
    Public ReadOnly Property EventDateTime As DateTime
       Get
@@ -68,6 +68,11 @@ Public Class LogEvent
       End Get
    End Property
    Private m_Status As Integer
+   Public ReadOnly Property nStatus As Integer
+      Get
+         Return m_Status
+      End Get
+   End Property
    Public ReadOnly Property Status As String
       Get
          Select Case m_Status
@@ -119,6 +124,11 @@ Public Class LogEvent
          Return m_Value
       End Get
    End Property
+   Public ReadOnly Property sEventTick As Double
+      Get
+         Return m_EventDateTime.Ticks
+      End Get
+   End Property
 
    Public ReadOnly Property sPROD As String
       Get
@@ -144,6 +154,8 @@ Public Class LogEvent
                m_ProdId = sValues(0)
                m_MachGroupId = DbControllers.m_MachGroupController.FindByMachGroupId(m_ProdId, sValues(1)).Name
                m_Status = sValues(2)
+            Case MachLogTypes.MACHINE_COMMAND
+
          End Select
       End If
    End Sub
@@ -168,4 +180,24 @@ Public Class LogEvent
       Return CreateMachLog(MachLogTypes.MACHGROUP_STATUS, dtEvent, Prod & cSeparator & MachGroup & cSeparator & State, SupervisorID)
    End Function
 
+   Public Shared Function CreateMachCommandLog(Command As MachineCommands, sProgramId As String, nError As Integer, SupervisorID As String)
+      Return CreateMachLog(MachLogTypes.MACHINE_COMMAND, DateTime.Now(), Command & cSeparator & sProgramId & cSeparator & nError, SupervisorID)
+   End Function
+
+   Public Shared Function CreateAlarmLog(dtEvent As DateTime, Alarm As String, SupervisorID As String)
+      Return CreateMachLog(MachLogTypes.ALARM, dtEvent, Alarm, SupervisorID)
+   End Function
+
+   Public Shared Function CreateMachineModeLog(MachineMode As Integer, SupervisorID As String)
+      Return CreateMachLog(MachLogTypes.MACHINE_MODE, DateTime.Now(), MachineMode, SupervisorID)
+   End Function
+
+   Public Shared Function CreateMachineStateLog(MachineStatus As Integer, SupervisorID As String)
+      Return CreateMachLog(MachLogTypes.MACHINE_STATUS, DateTime.Now(), MachineStatus, SupervisorID)
+   End Function
+
+   Public Shared Function CreateReadVarLog(VarAddress As String, VarValue As String, SupervisorID As String)
+      Return CreateMachLog(MachLogTypes.READ_VAR, DateTime.Now(), VarAddress & cSeparator & VarValue, SupervisorID)
+   End Function
+
 End Class

EgtBEAMWALL.Supervisor/VariablesList/VariablesListV.xaml

@@ -5,7 +5,7 @@
    <DataGrid ItemsSource="{Binding VariablesList}"
              AutoGenerateColumns="False">
       <DataGrid.Columns>
-         <DataGridTextColumn Header="Name" Binding="{Binding sName}" Width="1*"/>
+         <DataGridTextColumn Header="Name" Binding="{Binding sDescription}" Width="1*"/>
          <DataGridTextColumn Header="Address" Binding="{Binding sAddress}" Width="1*"/>
          <DataGridTextColumn Header="Value" Binding="{Binding sValue}" Width="1*"/>
       </DataGrid.Columns>

EgtBEAMWALL.Supervisor/VariablesList/VariablesListVM.vb

@@ -44,6 +44,12 @@ Public Class Variable
       End Set
    End Property
 
+   Public ReadOnly Property sDescription As String
+      Get
+         Return CommVar.sDescription
+      End Get
+   End Property
+
    Public Property sAddress As String
       Get
          Return CommVar.sAddress

EgtBEAMWALL.Supervisor/app.config

@@ -19,7 +19,7 @@
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
       <dependentAssembly>
         <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-8.0.29.0" newVersion="8.0.29.0" />
+        <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
@@ -46,7 +46,7 @@
   <system.data>
     <DbProviderFactories>
       <remove invariant="MySql.Data.MySqlClient" />
-      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.29.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
+      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
     </DbProviderFactories>
   </system.data>
 <startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" /></startup></configuration>

EgtBEAMWALL.Supervisor/app.manifest

@@ -0,0 +1,79 @@
+<?xml version="1.0" encoding="utf-8"?>
+<assembly manifestVersion="1.0" xmlns="urn:schemas-microsoft-com:asm.v1">
+  <assemblyIdentity version="1.0.0.0" name="MyApplication.app"/>
+  <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2">
+    <security>
+      <requestedPrivileges xmlns="urn:schemas-microsoft-com:asm.v3">
+        <!-- UAC Manifest Options
+             If you want to change the Windows User Account Control level replace the 
+             requestedExecutionLevel node with one of the following.
+
+        <requestedExecutionLevel  level="asInvoker" uiAccess="false" />
+        <requestedExecutionLevel  level="requireAdministrator" uiAccess="false" />
+        <requestedExecutionLevel  level="highestAvailable" uiAccess="false" />
+
+            Specifying requestedExecutionLevel element will disable file and registry virtualization. 
+            Remove this element if your application requires this virtualization for backwards
+            compatibility.
+        -->
+        <requestedExecutionLevel level="asInvoker" uiAccess="false" />
+      </requestedPrivileges>
+    </security>
+  </trustInfo>
+
+  <compatibility xmlns="urn:schemas-microsoft-com:compatibility.v1">
+    <application>
+      <!-- A list of the Windows versions that this application has been tested on
+           and is designed to work with. Uncomment the appropriate elements
+           and Windows will automatically select the most compatible environment. -->
+
+      <!-- Windows Vista -->
+      <!--<supportedOS Id="{e2011457-1546-43c5-a5fe-008deee3d3f0}" />-->
+
+      <!-- Windows 7 -->
+      <supportedOS Id="{35138b9a-5d96-4fbd-8e2d-a2440225f93a}" />
+
+      <!-- Windows 8 -->
+      <supportedOS Id="{4a2f28e3-53b9-4441-ba9c-d69d4a4a6e38}" />
+
+      <!-- Windows 8.1 -->
+      <supportedOS Id="{1f676c76-80e1-4239-95bb-83d0f6d0da78}" />
+
+      <!-- Windows 10 -->
+      <supportedOS Id="{8e0f7a12-bfb3-4fe8-b9a5-48fd50a15a9a}" />
+
+    </application>
+  </compatibility>
+
+  <!-- Indicates that the application is DPI-aware and will not be automatically scaled by Windows at higher
+       DPIs. Windows Presentation Foundation (WPF) applications are automatically DPI-aware and do not need 
+       to opt in. Windows Forms applications targeting .NET Framework 4.6 that opt into this setting, should 
+       also set the 'EnableWindowsFormsHighDpiAutoResizing' setting to 'true' in their app.config. 
+       
+       Makes the application long-path aware. See https://docs.microsoft.com/windows/win32/fileio/maximum-file-path-limitation -->
+  <!--
+  <application xmlns="urn:schemas-microsoft-com:asm.v3">
+    <windowsSettings>
+      <dpiAware xmlns="http://schemas.microsoft.com/SMI/2005/WindowsSettings">true</dpiAware>
+      <longPathAware xmlns="http://schemas.microsoft.com/SMI/2016/WindowsSettings">true</longPathAware>
+    </windowsSettings>
+  </application>
+  -->
+
+  <!-- Enable themes for Windows common controls and dialogs (Windows XP and later) -->
+  <!--
+  <dependency>
+    <dependentAssembly>
+      <assemblyIdentity
+          type="win32"
+          name="Microsoft.Windows.Common-Controls"
+          version="6.0.0.0"
+          processorArchitecture="*"
+          publicKeyToken="6595b64144ccf1df"
+          language="*"
+        />
+    </dependentAssembly>
+  </dependency>
+  -->
+
+</assembly>

EgtBEAMWALL.ViewerOptimizer/AboutBoxWindow/AboutBoxV.xaml

@@ -43,7 +43,7 @@
          <TextBox Name="InfoLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Stretch"
                VerticalAlignment="Stretch" FontSize="12" IsReadOnly="True" TextWrapping="Wrap"/>
          <Button Name="ExitBtn" Grid.Column="1" Grid.Row="8" IsCancel="True"
-            Margin="100,0"/>
+               Margin="100,0"/>
 
       </Grid>
 

EgtBEAMWALL.ViewerOptimizer/AboutBoxWindow/AboutBoxV.xaml.vb

@@ -1,9 +1,9 @@
 Imports EgtUILib
+Imports EgtBEAMWALL.Core
 
 Public Class AboutBoxV
 
-   Private Sub AboutBoxWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+   Private Sub AboutBoxWD_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
-      Me.Owner = Application.Current.MainWindow
       DescriptionLbl.Text = My.Application.Info.Description.ToString()
       VersionLbl.Text = "Version : " & My.Application.Info.Version.Major.ToString() &
                                  "." & My.Application.Info.Version.Minor.ToString() &
@@ -24,6 +24,9 @@ Public Class AboutBoxV
       sInfo &= sKey & " - " & sKlev & " - " & sOpts & sLeftDays & Environment.NewLine
       sInfo &= "DataRoot " & Map.refMainWindowVM.MainWindowM.sDataRoot & Environment.NewLine
       sInfo &= "MachinesRoot " & Map.refMainWindowVM.MainWindowM.sMachinesRoot & Environment.NewLine
+      Dim sOpSys As String = String.Empty
+      EgtGetOsInfo( sOpSys)
+      sInfo &= sOpSys & Environment.NewLine
       Dim sCPU As String = String.Empty
       EgtGetCpuInfo( sCPU)
       sInfo &= sCPU & Environment.NewLine

EgtBEAMWALL.ViewerOptimizer/AddSectionXMaterialWnd/AddSectionXMaterialWndVM.vb

@@ -132,7 +132,7 @@ Public Class AddSectionXMaterialWndVM
       ' carico le colonne della datagrid
       LoadColumns(Map.refProjectVM.BTLStructureVM.nPROJTYPE)
       NewSectionXMaterialList = New ObservableCollection(Of SectionXMaterialToBeAdded)(SectXMatList)
-      WhSectXMatList = Map.refWarehouseWndVM.GetSectionXMaterialsFromWarehouse()
+      WhSectXMatList = WarehouseWndVM.GetSectionXMaterialsFromWarehouse()
       ' Prendo i SectionXMaterial appena messi nella Lista di questa finestra e li confronto con ciascuno di quelli presenti in Warehouse.
       ' Se le sezioni sono uguali carico i materiali relativi alla medesima sezione.
       ' Se i materiali di quella medesima sezione non ci sono disabilito la CheckBox Alias.

EgtBEAMWALL.ViewerOptimizer/App.config

@@ -7,10 +7,9 @@
   <entityFramework>
     <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6" />
     <providers>
-      
       <provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
-    <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d">
+      <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
-      </provider></providers>
+    </providers>
   </entityFramework>
   <connectionStrings>
     <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=EgtUser;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient" />
@@ -19,7 +18,7 @@
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
       <dependentAssembly>
         <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-8.0.29.0" newVersion="8.0.29.0" />
+        <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
@@ -42,7 +41,7 @@
   <system.data>
     <DbProviderFactories>
       <remove invariant="MySql.Data.MySqlClient" />
-      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.29.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
+      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
     </DbProviderFactories>
   </system.data>
 <startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" /></startup></configuration>

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLFeatureVM.vb

@@ -40,7 +40,6 @@ Public Class BTLFeatureVM
                ' rendo non calcolata questa feature
                ResetCalcFeature()
             End If
-            NotifyPropertyChanged("nSelGRP")
             NotifyPropertyChanged(NameOf(nSelGRP))
             EgtDraw()
             If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
@@ -214,7 +213,7 @@ Public Class BTLFeatureVM
          m_SelQParam = value
          If Not IsNothing(m_SelQParam) Then
             ' imposto path disegno da mostrare in BottomPanel
-            Map.refBottomPanelVM.SetCurrDraw(sDrawPath)
+            Map.refBottomPanelVM.SetCurrDraw(m_SelQParam.sDrawPath)
          End If
          NotifyPropertyChanged(NameOf(SelQBTLParam))
       End Set
@@ -222,7 +221,7 @@ Public Class BTLFeatureVM
 
    Public ReadOnly Property Edit_Visibility As Visibility
       Get
-         Return If(Map.refMainWindowVM.MainWindowM.nUserLevel > 5 AndAlso BTLFeatureM.IsFreeContour AndAlso Not Map.refFreeContourManagerVM.bIsActive, Visibility.Visible, Visibility.Collapsed)
+         Return If(BTLFeatureM.IsFreeContour AndAlso Not Map.refFreeContourManagerVM.bIsActive, Visibility.Visible, Visibility.Collapsed)
       End Get
    End Property
    Public ReadOnly Property SaveCancel_Visibility As Visibility

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLPartVM.vb

@@ -1629,9 +1629,9 @@ Public Class BTLPartVM
       AddHandler m_BTLFeatureVMList.CollectionChanged, AddressOf OnBTLFeatureVMListChanged
    End Sub
 
-   Public Sub Rotation(IsPositive As Boolean, SelectedMachineType As MachineType, Optional dAng As Double = 90, Optional bVerifyDuplo As Boolean = True)
+   Public Sub Rotation(IsPositive As Boolean, SelectedMachineType As MachineType, Optional bRedraw As Boolean = True, Optional dAng As Double = 90, Optional bVerifyDuplo As Boolean = True)
       Dim OldSection As SectionXMaterial = Section
-      If m_BTLPartM.Rotation(IsPositive, SelectedMachineType, dAng) Then
+      If m_BTLPartM.Rotation(IsPositive, SelectedMachineType, bRedraw, dAng) Then
          ' aggiorno visualizzazione dimensioni
          NotifyPropertyChanged(NameOf(sW))
          NotifyPropertyChanged(NameOf(sH))
@@ -1985,11 +1985,11 @@ Public Class BTLPartVM
       BackRotation(True)
    End Sub
 
-   Public Sub BackRotation(Optional bUpdateSection As Boolean = False)
+   Public Sub BackRotation(Optional bUpdateSection As Boolean = False, Optional bRedraw As Boolean = True)
       ' salvo sezione impostata
       Dim CurrSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SelSection
       ' ruoto
-      Rotation(False, Map.refProjectVM.BTLStructureVM.nPROJTYPE)
+      Rotation(False, Map.refProjectVM.BTLStructureVM.nPROJTYPE, bRedraw)
       ' imposto lock
       bLockRotation = True
       ' se progetto travi e sezione precedente diversa da vuota (tutti i pezzi)
@@ -2017,10 +2017,10 @@ Public Class BTLPartVM
       ForwardRotation(True)
    End Sub
 
-   Public Sub ForwardRotation(Optional bUpdateSection As Boolean = False)
+   Public Sub ForwardRotation(Optional bUpdateSection As Boolean = False, Optional bRedraw As Boolean = True)
       ' salvo sezione impostata
       Dim CurrSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SelSection
-      Rotation(True, Map.refProjectVM.BTLStructureVM.nPROJTYPE)
+      Rotation(True, Map.refProjectVM.BTLStructureVM.nPROJTYPE, bRedraw)
       ' imposto lock
       bLockRotation = True
       ' se progetto travi e sezione precedente diversa da vuota (tutti i pezzi)
@@ -2160,6 +2160,9 @@ Public Class BTLPartVM
       Select Case e.PropertyName
          Case NameOf(sender.nSelGRP), NameOf(sender.nSelSIDE)
             CalcGlobalUpdate(True)
+            ' imposto path disegno da mostrare in BottomPanel
+            Dim SelPBTLParam As BTLParamVM = Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.SelPBTLParam
+            If Not IsNothing(SelPBTLParam) Then Map.refBottomPanelVM.SetCurrDraw(SelPBTLParam.sDrawPath)
          Case NameOf(sender.bDO)
             NotifyPropertyChanged(NameOf(bDOALL))
             ' setto pezzo da ricalcolare

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLStructureVM.vb

@@ -79,7 +79,8 @@ Public Class BTLStructureVM
             Map.refProjectVM.NotifyPropertyChanged(NameOf(Map.refProjectVM.PartManager_Visibility))
          Case SelectionTypes.HIGHLIGHT
             If m_PrevSelectionType = SelectionTypes.SELECT_ Then
-
+               EgtBeamShowFacesName( False)
+               EgtBeamShowLoadingSide( False, False)
             End If
             If Not IsNothing(m_SelBTLPart) Then
                m_SelBTLPart = Nothing
@@ -181,6 +182,8 @@ Public Class BTLStructureVM
    End Sub
 
    Private Sub SelectBTLPart(BtlPart As BTLPartVM)
+      EgtBeamShowFacesName( False)
+      EgtBeamShowLoadingSide( False, False)
       m_SelBTLPart = BtlPart
       If Map.refMainMenuVM.SelPage = Pages.VIEW Then
          ' se modalità building, la tolgo
@@ -191,6 +194,10 @@ Public Class BTLStructureVM
          SceneSelPartSelection()
          ' seleziono pezzo in Db geometrico
          EgtBeamSetPart(BtlPart.nPartId)
+         EgtBeamShowFacesName( True)
+         Dim bLoadingSideShow As Boolean = (nPROJTYPE = BWType.BEAM)
+         Dim bLeftToRight As Boolean = Not ( CurrentMachine.ViewDir = VT.ISO_NW OrElse CurrentMachine.ViewDir = VT.ISO_NE)
+         EgtBeamShowLoadingSide( bLoadingSideShow, bLeftToRight)
          ' seleziono pagina BottomPanel
          Map.refBottomPanelVM.SetSelPartFeatureTab(BottomPanelVM.PartFeatureTab.PART)
          '' mostro barra di gestione pezzo
@@ -239,6 +246,8 @@ Public Class BTLStructureVM
          Map.refProjectVM.BTLStructureVM.ShowSolid(False, BtlPart.nPartId)
       End If
       If m_SelBTLPart Is BtlPart Then
+         EgtBeamShowFacesName( False)
+         EgtBeamShowLoadingSide( False, False)
          m_SelBTLPart = Nothing
          NotifyPropertyChanged(NameOf(SelBTLPart))
       End If

EgtBEAMWALL.ViewerOptimizer/ChangeParameterWnd/ChangeParameterWndVM.vb

@@ -34,12 +34,6 @@ Public Class ChangeParameterWndVM
                m_ParamList.Add(New Parameters(NewBTLParam))
                ParamIndex += 1
             End While
-            '' leggo tutti i Q della feature
-            'ParamIndex = 1
-            'While BTLIniFile.GetBeamPrivateProfileParam(m_SelPRC.nGRP, m_SelPRC.nPRC, False, ParamIndex, Nothing, NewBTLParam)
-            '   m_ParamList.Add(New Parameters(NewBTLParam))
-            '   ParamIndex += 1
-            'End While
             ' aggiungo bDO come parametro
             m_ParamList.Add(New Parameters(NewBTLParam, True))
             ' seleziono parametro vuoto per dargli un valore iniziale ed evitare che visualizzi sia text che check
@@ -188,21 +182,21 @@ Public Class Parameters
    End Property
 
    Private m_bActualValue As Boolean
-   Public Property bActualValue As String
+   Public Property bActualValue As Boolean
       Get
          Return m_bActualValue
       End Get
-      Set(value As String)
+      Set(value As Boolean)
          m_bActualValue = value
       End Set
    End Property
 
-   Private m_bNewValue As String
+   Private m_bNewValue As Boolean
-   Public Property bNewValue As String
+   Public Property bNewValue As Boolean
       Get
          Return m_bNewValue
       End Get
-      Set(value As String)
+      Set(value As Boolean)
          m_bNewValue = value
       End Set
    End Property
@@ -234,6 +228,7 @@ Public Class Parameters
    Sub New(BTLParamM As BTLParamM, Optional IsCheckBox As Boolean = False)
       MyBase.New(BTLParamM)
       m_bIsCheckBox = IsCheckBox
+      If IsCheckBox Then m_BTLParamM.SetType(BTLParamType.CHECKBOX)
    End Sub
 
    'Shared Operator =(ByVal S1 As Parameters, ByVal S2 As BTLParam) As Boolean

EgtBEAMWALL.ViewerOptimizer/ConfigurationPage/ConfigurationPageVM.vb

@@ -400,7 +400,7 @@ Public Class ConfigurationPageVM
       Dim FilePath As String = CurrentMachine.sMachDir & "\" & If(CurrentMachine.nType = MachineType.BEAM, BEAM_DIR, WALL_DIR) & "\" & TS3DATA_FILE
       Dim sBakFilePath As String = Path.ChangeExtension(FilePath, ".bak")
       If File.Exists(sBakFilePath) Then File.Delete(sBakFilePath)
-      File.Move(FilePath, sBakFilePath)
+      If File.Exists(FilePath) Then File.Move(FilePath, sBakFilePath)
       File.WriteAllLines(FilePath, NewTs3DataFileContent, Text.Encoding.UTF8)
       ' se macchina di tipo BOTH copio il file appena scritto nella cartella Wall nella cartella Beam
       If CurrentMachine.nType = MachineType.BOTH Then

EgtBEAMWALL.ViewerOptimizer/Constants/ConstMsg.vb

@@ -1,54 +0,0 @@
-Module ConstMsg
-
-   Public Const MSG_SETUPERRORS As Integer = 5000 + 1470
-
-   Public Const MSG_MISSINGKEYWD As Integer = 10100
-   Public Const MSG_NUMERICKEYBOARDWD As Integer = 10200
-   Public Const MSG_MESSAGEBOX As Integer = 15000
-   Public Const MSG_EGTSAVEFILEDIALOG As Integer = 30000
-
-   Public Const MSG_OMAGCUT As Integer = 90000
-   Public Const MSG_GENERAL As Integer = MSG_OMAGCUT
-   Public Const MSG_WORKINPROGRESSPAGEUC As Integer = MSG_OMAGCUT + 100
-   Public Const MSG_DIRECTCUTPAGEUC As Integer = MSG_OMAGCUT + 200
-   Public Const MSG_MANUALAXESMOVEPAGEUC As Integer = MSG_OMAGCUT + 220
-   Public Const MSG_CADCUTPAGEUC As Integer = MSG_OMAGCUT + 300
-   Public Const MSG_NESTPAGEUC As Integer = MSG_OMAGCUT + 330
-   Public Const MSG_SPLITPAGEUC As Integer = MSG_OMAGCUT + 340
-   Public Const MSG_MOVERAWPAGEUC As Integer = MSG_OMAGCUT + 360
-   Public Const MSG_DRAWPAGEUC As Integer = MSG_OMAGCUT + 380
-   Public Const MSG_COMPONENTPAGEUC As Integer = MSG_OMAGCUT + 400
-   Public Const MSG_IMPORTPAGEUC As Integer = MSG_OMAGCUT + 450
-   Public Const MSG_OPENPAGEUC As Integer = MSG_OMAGCUT + 490
-   Public Const MSG_RAWPARTPAGEUC As Integer = MSG_OMAGCUT + 500
-   Public Const MSG_CHOOSEMACHININGPAGEUC As Integer = MSG_OMAGCUT + 535
-   Public Const MSG_SIMULATIONPAGEUC As Integer = MSG_OMAGCUT + 550
-   Public Const MSG_FRAMECUTPAGEUC As Integer = MSG_OMAGCUT + 600
-   Public Const MSG_MACHINEPAGEUC As Integer = MSG_OMAGCUT + 700
-   Public Const MSG_TOOLSDBPAGEUC As Integer = MSG_OMAGCUT + 720
-   Public Const MSG_MACHININGSDBPAGEUC As Integer = MSG_OMAGCUT + 760
-   Public Const MSG_COMBOBOXPARAM As Integer = MSG_OMAGCUT + 800
-   Public Const MSG_ALARMSPAGEUC As Integer = MSG_OMAGCUT + 900
-   Public Const MSG_MACHINECNPAGEUC As Integer = MSG_OMAGCUT + 950
-   Public Const MSG_OPTIONSPAGEUC As Integer = MSG_OMAGCUT + 980
-   Public Const MSG_EGTMSGBOX As Integer = MSG_OMAGCUT + 1100
-   Public Const MSG_CSVPAGEUC As Integer = MSG_OMAGCUT + 1200
-
-   Public Const MSG_OMAGOFFICE As Integer = 91400
-   Public Const MSG_OPTIONPANEL As Integer = MSG_OMAGOFFICE
-   Public Const MSG_MYMACHININGDBWINDOW As Integer = MSG_OMAGOFFICE + 50
-   Public Const MSG_TOPCMDBAR As Integer = MSG_OMAGOFFICE + 100
-   Public Const MSG_RAWPARTTAB As Integer = MSG_OMAGOFFICE + 150
-   Public Const MSG_VEINMATCHING As Integer = MSG_OMAGOFFICE + 200
-   Public Const MSG_GENERIC As Integer = MSG_OMAGOFFICE + 250
-
-   Public Const MSG_EGTWPFLIB5 As Integer = 30000
-   Public Const MSG_TOPCOMMANDBAR As Integer = MSG_EGTWPFLIB5 + 500
-   Public Const MSG_GRIDVIEWPANEL As Integer = MSG_EGTWPFLIB5 + 800
-   Public Const MSG_TOOLDB As Integer = MSG_EGTWPFLIB5 + 1000
-   Public Const MSG_TOOLDBERRORS As Integer = MSG_EGTWPFLIB5 + 1100
-   Public Const MSG_MACHININGDB As Integer = MSG_EGTWPFLIB5 + 1200
-   Public Const MSG_MACHININGDBERRORS As Integer = MSG_EGTWPFLIB5 + 1400
-   Public Const MSG_SIMULATION As Integer = MSG_EGTWPFLIB5 + 1600
-
-End Module

EgtBEAMWALL.ViewerOptimizer/EgtBEAMWALL.ViewerOptimizer.vbproj

@@ -102,6 +102,9 @@
   <PropertyGroup>
     <ApplicationIcon>Resources\EgtBEAMWALL.ico</ApplicationIcon>
   </PropertyGroup>
+  <PropertyGroup>
+    <ApplicationManifest>app.manifest</ApplicationManifest>
+  </PropertyGroup>
   <ItemGroup>
     <Reference Include="BouncyCastle.Crypto, Version=1.8.5.0, Culture=neutral, PublicKeyToken=0e99375e54769942">
       <HintPath>..\packages\BouncyCastle.1.8.5\lib\BouncyCastle.Crypto.dll</HintPath>
@@ -615,7 +618,6 @@
     <Compile Include="ItemParamList\RawPartListV.xaml.vb">
       <DependentUpon>RawPartListV.xaml</DependentUpon>
     </Compile>
-    <Compile Include="Constants\ConstMsg.vb" />
     <Compile Include="FeatureManager\FeatureManagerV.xaml.vb">
       <DependentUpon>FeatureManagerV.xaml</DependentUpon>
     </Compile>
@@ -732,6 +734,7 @@
       <CustomToolNamespace>My.Resources</CustomToolNamespace>
     </EmbeddedResource>
     <None Include="App.config" />
+    <None Include="app.manifest" />
     <None Include="My Project\Settings.settings">
       <Generator>SettingsSingleFileGenerator</Generator>
       <LastGenOutput>Settings.Designer.vb</LastGenOutput>
@@ -946,6 +949,12 @@
   <ItemGroup>
     <Resource Include="Resources\PartManager\Clock.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\LeftPanel\NewRawPartAuto.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\TopPanel\RemoveAllRawPart.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\EgtBEAMWALL\EgtBEAMWALL.ViewerOptimizerR32.exe

EgtBEAMWALL.ViewerOptimizer/FeatureManager/FeatureManagerVM.vb

@@ -18,8 +18,12 @@ Public Class FeatureManagerVM
 
    Public ReadOnly Property Edit_IsEnabled As Boolean
       Get
-         Return m_FeatureManager_IsEnabled AndAlso Not IsNothing(Map.refProjectVM.BTLStructureVM) AndAlso Map.refProjectVM.BTLStructureVM.SelBTLParts.Count > 0 AndAlso
+         Return m_FeatureManager_IsEnabled AndAlso Not IsNothing(Map.refProjectVM.BTLStructureVM) AndAlso
-                Map.refProjectVM.BTLStructureVM.SelBTLParts(0).SelBTLFeatureVM.BTLFeatureM.IsFreeContour() AndAlso Map.refProjectVM.BTLStructureVM.SelBTLParts(0).SelBTLFeatureVM.bDO
+                Map.refProjectVM.BTLStructureVM.SelBTLParts.Count > 0 AndAlso
+                Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLParts(0)) AndAlso
+                Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLParts(0).SelBTLFeatureVM) AndAlso
+                Map.refProjectVM.BTLStructureVM.SelBTLParts(0).SelBTLFeatureVM.BTLFeatureM.IsFreeContour() AndAlso
+                Map.refProjectVM.BTLStructureVM.SelBTLParts(0).SelBTLFeatureVM.bDO
       End Get
    End Property
 

EgtBEAMWALL.ViewerOptimizer/FreeContourInput/FreeContourInputV.xaml

@@ -19,7 +19,8 @@
                  Style="{StaticResource OptionTextBlock}"/>
       <TextBox Text="{Binding Text, UpdateSourceTrigger=PropertyChanged}"
                Width="200"
-               Visibility="{Binding Text_Visibility}" Margin="5,0,5,0">
+               Visibility="{Binding Text_Visibility}" Margin="5,0,5,0"
+               Style="{StaticResource FreeContour_TextBox}">
          <TextBox.InputBindings>
             <KeyBinding Key="Enter" Command="{Binding Done_Command, UpdateSourceTrigger=PropertyChanged}"/>
             <KeyBinding Key="S" Modifiers="Control" Command="{Binding Show_Command}"/>

EgtBEAMWALL.ViewerOptimizer/FreeContourManager/FreeContourManagerVM.vb

@@ -596,6 +596,12 @@ Public Class FreeContourManagerVM
    Friend Sub UpdateUi()
       ' se attiva operazione in piu' passaggi, esco
       If Map.refSceneHostVM.MainController.GetContinue() Then Return
+      ' se finita creazione curva (è stata chiusa)
+      If Map.refFreeContourManagerVM.bIsCreatingPath Then
+         Dim nNewPathLayerId As Integer = EgtGetFirstNameInGroup(nSelPartId, "NewPathLayer")
+         Dim nNewPathId As Integer = EgtGetFirstInGroup(nNewPathLayerId)
+         If EgtGetType(nNewPathId) = GDB_TY.CRV_COMPO Then Map.refFreeContourManagerVM.CreatingPathEnd()
+      End If
       ' se non ci sono piu' i percorsi, permetto di aggiungerli
       If EgtGetType(m_nNewPathId) = GDB_TY.NONE Then
          m_nNewPathId = GDB_ID.NULL
@@ -925,6 +931,8 @@ Public Class FreeContourManagerVM
          Return sLayerName = PATH_SIDEANGLAYER
       ElseIf Map.refFreeContourManagerVM.bIsOpeningCurveCompo Then
          Return nId = m_nNewPathId
+      Else
+         Return False
       End If
    End Function
 

EgtBEAMWALL.ViewerOptimizer/ItemParamList/RawPartListV.xaml

@@ -131,6 +131,18 @@
                </Style>
             </DataGridTextColumn.EditingElementStyle>
          </DataGridTextColumn>
+         <!--PosZ - Posizione in Z-->
+         <DataGridTextColumn x:Key="colPOSZ" Binding="{Binding sPosZ}">
+            <DataGridTextColumn.Header>
+               <TextBlock Text="{Binding Path=DataContext.PosZ_Msg,
+                                         RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:RawPartListV}}}"/>
+            </DataGridTextColumn.Header>
+            <DataGridTextColumn.EditingElementStyle>
+               <Style TargetType="{x:Type TextBox}">
+                  <Setter Property="Foreground" Value="Blue" />
+               </Style>
+            </DataGridTextColumn.EditingElementStyle>
+         </DataGridTextColumn>
          <!--MAT - Materiale-->
          <DataGridTextColumn x:Key="colMATERIAL" Binding="{Binding sMATERIAL}">
             <DataGridTextColumn.Header>

EgtBEAMWALL.ViewerOptimizer/ItemParamList/RawPartListVM.vb

@@ -69,6 +69,12 @@ Public Class RawPartListVM
       End Get
    End Property
 
+   Public ReadOnly Property PosZ_Msg As String
+      Get
+         Return EgtMsg(61728)
+      End Get
+   End Property
+
    Public ReadOnly Property Material_Msg As String
       Get
          Return EgtMsg(61607)

EgtBEAMWALL.ViewerOptimizer/LeftPanel/LeftPanelV.xaml

@@ -90,6 +90,13 @@
                  Style="{StaticResource LeftPanel_Button}">
             <Image Source="/Resources/LeftPanel/NewRawPart.png" Stretch="Uniform"/>
          </Button>
+         <Button Command="{Binding NewRawPartLast_Command}"
+                 Visibility="{Binding MachiningPage_Visibility}"
+                 ToolTip="{Binding NewRawPartLast_ToolTip}"
+                 IsEnabled="{Binding LeftPanel_IsEnabled}"
+                 Style="{StaticResource LeftPanel_Button}">
+            <Image Source="/Resources/LeftPanel/NewRawPartAuto.png" Stretch="Uniform"/>
+         </Button>
          <Button Command="{Binding AddToRawPart_Command}"
                  Visibility="{Binding MachiningPage_Visibility}"
                  ToolTip="{Binding AddToRawPart_ToolTip}"

EgtBEAMWALL.ViewerOptimizer/LeftPanel/LeftPanelVM.vb

@@ -100,6 +100,7 @@ Public Class LeftPanelVM
 
    ' Definizione comandi
    Private m_cmdNewRawPart As ICommand
+   Private m_cmdNewRawPartLast As ICommand
    Private m_cmdAddToRawPart As ICommand
    Private m_cmdCopyPart As ICommand
    Private m_cmdAddPart As ICommand
@@ -155,6 +156,12 @@ Public Class LeftPanelVM
       End Get
    End Property
 
+   Public ReadOnly Property NewRawPartLast_ToolTip As String
+      Get
+         Return EgtMsg(61977)
+      End Get
+   End Property
+
    Public ReadOnly Property AddToRawPart_ToolTip As String
       Get
          Return EgtMsg(61904)
@@ -258,7 +265,7 @@ Public Class LeftPanelVM
    Public ReadOnly Property NewRawPart_Command As ICommand
       Get
          If m_cmdNewRawPart Is Nothing Then
-            m_cmdNewRawPart = New Command(AddressOf NewRawPart)
+            m_cmdNewRawPart = New Command(AddressOf NewRawPartCmd)
          End If
          Return m_cmdNewRawPart
       End Get
@@ -267,18 +274,49 @@ Public Class LeftPanelVM
    ''' <summary>
    ''' Execute the Exec.  This method is invoked by the ExecCommand.
    ''' </summary>
-   Public Sub NewRawPart()
+   Public Sub NewRawPartCmd()
+      NewRawPart(False)
+   End Sub
+
+   Public Sub NewRawPart(bLast As Boolean)
       If IsNothing(Map.refProdManagerVM.CurrProd) Then Return
       Dim SelPart As BTLPartVM = Map.refProjectVM.BTLStructureVM.SelBTLPart
-      If IsNothing(SelPart) Then Return
+      Dim SelParts As List(Of BTLPartVM) = Map.refProjectVM.BTLStructureVM.SelBTLParts.ToList()
+      If IsNothing(SelParts) OrElse SelParts.Count <= 0 Then Return
+      ' verifico che abbiano tutti la stessa sezione
+      Dim dHSection As Double = SelParts(0).dH
+      Dim dWSection As Double = SelParts(0).dW
+      For PartIndex = 0 To SelParts.Count - 1
+         Dim Part As BTLPartVM = SelParts(PartIndex)
+         If Not IsNothing(Part) Then
+            If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
+               If Part.dH <> dHSection OrElse Part.dW <> dWSection Then
+                  MessageBox.Show(EgtMsg(61970), EgtMsg(30007))
+                  Return
+               End If
+            ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.WALL Then
+               If Part.dH <> dHSection Then
+                  MessageBox.Show(EgtMsg(61970), EgtMsg(30007))
+                  Return
+               End If
+            End If
+         Else
+            SelParts.Remove(Part)
+         End If
+      Next
+      ' se pareti e piu' di uno selezionato, esco
+      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.WALL And SelParts.Count > 1 Then
+         MessageBox.Show(EgtMsg(61971), EgtMsg(30007))
+         Return
+      End If
       ' se nessun grezzo, rendo tutti i pezzi visibili
       If Map.refProjectVM.MachGroupPanelVM.MachGroupVMList.Count = 0 Then
          Map.refProjectVM.BTLStructureVM.ShowAll(False)
       End If
       ' verifico se sono gia' stati messi tutti i pezzi richiesti
-      If Not VerifyPartCount(SelPart) Then Return
+      If Not VerifyPartCount(SelParts) Then Return
-      Dim dRawL As Double = SelPart.dL
+      Dim dRawL As Double = SelParts(0).dL
-      Dim dRawW As Double = SelPart.dW
+      Dim dRawW As Double = SelParts(0).dW
       Dim dStartOffset As Double = 0
       Dim dKerf As Double = 0
       Dim dOffset As Double = WarehouseHelper.GetOffset(Map.refProjectVM.BTLStructureVM.nPROJTYPE)
@@ -313,22 +351,29 @@ Public Class LeftPanelVM
                WarehouseHelper.GetCurrentDimensions(Map.refProjectVM.BTLStructureVM.nPROJTYPE, dRawW, dRawL)
             Case WarehouseType.MEDIUM
                Dim SectionList As List(Of SParam) = WarehouseHelper.GetSectionList()
-               Dim SParamlist As List(Of SParam) = SectionList.FindAll(Function(x) x.SectXMat = SelPart.Section)
+               Dim SParamlist As List(Of SParam) = SectionList.FindAll(Function(x) x.SectXMat = SelParts(0).Section)
-               If SParamlist.Count = 0 Then
+               If bLast Then
-                  ' apro finestra con solo edit
+                  If SParamlist.Count > 0 Then
-                  If AddRawPartWnd(AddRawPartWndVM.EditTypes.ONLY_TEXT, SParamlist, dRawW, dRawL, dStartOffset, dOffset, dKerf) Then
+                     dRawL = SParamlist(0).dL
-                     WarehouseHelper.SetOffset(Map.refProjectVM.BTLStructureVM.nPROJTYPE, dOffset)
+                     dRawW = SParamlist(0).dW
-                     If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
-                        WarehouseHelper.SetStartOffset(dStartOffset)
-                     Else
-                        WarehouseHelper.SetKerf(dKerf)
-                     End If
                   Else
+                     MessageBox.Show(EgtMsg(61975), EgtMsg(30007))
                      Return
                   End If
-               ElseIf SParamlist.Count = 1 Then
+               Else
-                  ' se premuto shift
+                  If SParamlist.Count = 0 Then
-                  If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
+                     ' apro finestra con solo edit
+                     If AddRawPartWnd(AddRawPartWndVM.EditTypes.ONLY_TEXT, SParamlist, dRawW, dRawL, dStartOffset, dOffset, dKerf) Then
+                        WarehouseHelper.SetOffset(Map.refProjectVM.BTLStructureVM.nPROJTYPE, dOffset)
+                        If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
+                           WarehouseHelper.SetStartOffset(dStartOffset)
+                        Else
+                           WarehouseHelper.SetKerf(dKerf)
+                        End If
+                     Else
+                        Return
+                     End If
+                  ElseIf SParamlist.Count > 0 Then
                      ' imposto finestra con anche edit
                      If AddRawPartWnd(AddRawPartWndVM.EditTypes.TEXT_AND_COMBO, SParamlist, dRawW, dRawL, dStartOffset, dOffset, dKerf) Then
                         WarehouseHelper.SetOffset(Map.refProjectVM.BTLStructureVM.nPROJTYPE, dOffset)
@@ -340,58 +385,69 @@ Public Class LeftPanelVM
                      Else
                         Return
                      End If
-                  Else
-                     ' creo grezzo con l'unico materiale
-                     dRawL = SParamlist(0).dL
-                     dRawW = SParamlist(0).dW
-                  End If
-               Else
-                  ' imposto finestra di sola scelta dimensione
-                  Dim EditType As AddRawPartWndVM.EditTypes = AddRawPartWndVM.EditTypes.ONLY_COMBO
-                  ' se premuto shift
-                  If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
-                     ' imposto finestra con anche edit
-                     EditType = AddRawPartWndVM.EditTypes.TEXT_AND_COMBO
-                  End If
-                  If AddRawPartWnd(EditType, SParamlist, dRawW, dRawL, dStartOffset, dOffset, dKerf) Then
-                     WarehouseHelper.SetOffset(Map.refProjectVM.BTLStructureVM.nPROJTYPE, dOffset)
-                     If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
-                        WarehouseHelper.SetStartOffset(dStartOffset)
-                     Else
-                        WarehouseHelper.SetKerf(dKerf)
-                     End If
-                  Else
-                     Return
                   End If
                End If
          End Select
       End If
+      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
+         ' verifico se lunghezza barra e' maggiore della lunghezza dei pezzi
+         Dim dTotLen As Double = WarehouseHelper.GetStartOffset()
+         For PartIndex = 0 To SelParts.Count - 1
+            If PartIndex <> 0 Then
+               dTotLen += WarehouseHelper.GetOffset(BWType.BEAM)
+            End If
+            dTotLen += SelParts(PartIndex).dL
+         Next
+         If dTotLen > dRawL Then
+            MessageBox.Show(EgtMsg(61972), EgtMsg(30007))
+            Return
+         End If
+      End If
       ' creo nuovo gruppo di lavorazione
       Map.refMachGroupPanelVM.AddMachGroup()
       Dim nCurrMachGroup As Integer = EgtGetCurrMachGroup()
       Dim sCurrMachGroupName As String = ""
       EgtGetMachGroupName(nCurrMachGroup, sCurrMachGroupName)
-      ' creo copia del pezzo
-      Dim nPartDuploId As Integer = EgtDuploNew(SelPart.nPartId)
-      ' elimino valori calcolo dell'originale
-      MyMachGroupPanelVM.DuploRemoveProjCalc(nPartDuploId)
-      ' lo rendo std
-      EgtSetMode(nPartDuploId, GDB_MD.STD)
       Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
       ' scrivo dati per variabili P di comunicazione con la macchina in gruppo di lavorazione
       EgtSetInfo(nCurrMachGroup, MGR_RPT_PRODID, Map.refProdManagerVM.CurrProd.nProdId)
       EgtSetInfo(nCurrMachGroup, MGR_RPT_PATTID, nCurrMachGroup)
       If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
+         ' ordino i pezzi per lunghezza
+         SelParts = SelParts.OrderBy(Function(x) x.dL).ToList
+         ' creo copie dei pezzi
+         Dim nPartDuploIdList As New List(Of Integer)
+         For Each Part In SelParts
+            Dim nDuploId As Integer = EgtDuploNew(Part.nPartId)
+            ' elimino valori calcolo dell'originale
+            MyMachGroupPanelVM.DuploRemoveProjCalc(nDuploId)
+            ' lo rendo std
+            EgtSetMode(nDuploId, GDB_MD.STD)
+            nPartDuploIdList.Add(nDuploId)
+         Next
          ' scrivo dati costruzione grezzo in gruppo di lavorazione
          EgtSetInfo(nCurrMachGroup, MGR_RPT_BARLEN, dRawL)
          EgtSetInfo(nCurrMachGroup, MGR_RPT_MATERIAL, SelPart.sMATERIAL)
-         EgtSetInfo(nCurrMachGroup, MGR_RPT_PART & 1, nPartDuploId & "," & DoubleToString(dStartOffset, 3))
+         ' scrivo dati di tutti i pezzi
+         Dim dPosX As Double = WarehouseHelper.GetStartOffset()
+         ' ciclo sui pezzi
+         For nIndex = 0 To nPartDuploIdList.Count - 1
+            ' se non è primo, aggiungo offset tra barre standard
+            If nIndex <> 0 Then
+               dPosX += WarehouseHelper.GetOffset(BWType.BEAM)
+            End If
+            EgtSetInfo(nCurrMachGroup, MGR_RPT_PART & nIndex + 1, nPartDuploIdList(nIndex) & "," & DoubleToString(dPosX, 3))
+            ' incremento posizione della sua lunghezza
+            dPosX += SelParts(nIndex).dL
+         Next
          Dim BeamMachGroup As MyMachGroupVM = Map.refMachGroupPanelVM.GetLastMachGroup()
          ' eseguo script creazione grezzo
          Dim nERR As Integer = 0
          If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
             ' elimino duplo e gruppo di lavorazione
-            EgtErase(nPartDuploId)
+            For Each nDuploId In nPartDuploIdList
+               EgtErase(nDuploId)
+            Next
             BeamMachGroup.DeleteMachGroup()
             If File.Exists(sLogPath) Then
                Dim LogFile As String() = File.ReadAllLines(sLogPath)
@@ -399,7 +455,7 @@ Public Class LeftPanelVM
                   MessageBox.Show(LogFile(1), EgtMsg(30007), MessageBoxButton.OK, MessageBoxImage.Error)
                End If
             Else
-               MessageBox.Show("Impossible creating rawpart", EgtMsg(30007), MessageBoxButton.OK, MessageBoxImage.Error)
+               MessageBox.Show(EgtMsg(61973), EgtMsg(30007), MessageBoxButton.OK, MessageBoxImage.Error)
             End If
             ' se nessun grezzo, rimetto tutti i pezzi invisibili
             If Map.refProjectVM.MachGroupPanelVM.MachGroupVMList.Count = 0 Then
@@ -407,10 +463,14 @@ Public Class LeftPanelVM
             End If
             Return
          End If
-         EgtSetInfo(nPartDuploId, MGR_PRT_ROT, SelPart.nROTATED)
+         For nDuploIndex = 0 To SelParts.Count - 1
-         EgtSetInfo(nPartDuploId, MGR_PRT_FLIP, SelPart.nINVERTED)
+            EgtSetInfo(nPartDuploIdList(nDuploIndex), MGR_PRT_ROT, SelParts(nDuploIndex).nROTATED)
+            EgtSetInfo(nPartDuploIdList(nDuploIndex), MGR_PRT_FLIP, SelParts(nDuploIndex).nINVERTED)
+         Next
          ' aggiorno contatore pezzi usati in Prod
-         SelPart.RefreshPartInProd()
+         For Each SelPart In SelParts
+            SelPart.RefreshPartInProd()
+         Next
          'aggiorno lista pezzi
          BeamMachGroup.MyMachGroupM.RefreshPartList()
          BeamMachGroup.MyMachGroupM.RefreshGroupData()
@@ -418,6 +478,7 @@ Public Class LeftPanelVM
          BeamMachGroup.UpdateUsage()
          Core.ViewPanelVM.BWSetView(VT.ISO_SW, False)
       ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then
+         Dim nPartDuploId As Integer = EgtDuploNew(SelPart.nPartId)
          ' scrivo dati in gruppo di lavorazione
          Dim dPosX As Double = dKerf
          Dim dPosY As Double = dKerf
@@ -438,7 +499,7 @@ Public Class LeftPanelVM
                   MessageBox.Show(LogFile(1), EgtMsg(30007), MessageBoxButton.OK, MessageBoxImage.Error)
                End If
             Else
-               MessageBox.Show("Impossible creating rawpart", EgtMsg(30007), MessageBoxButton.OK, MessageBoxImage.Error)
+               MessageBox.Show(EgtMsg(61973), EgtMsg(30007), MessageBoxButton.OK, MessageBoxImage.Error)
             End If
             ' se nessun grezzo, rimetto tutti i pezzi invisibili
             If Map.refProjectVM.MachGroupPanelVM.MachGroupVMList.Count = 0 Then
@@ -481,16 +542,111 @@ Public Class LeftPanelVM
             dKerf = AddRawPartWndVM.VariableList(2).dValue
             dOffset = AddRawPartWndVM.VariableList(3).dValue
       End Select
+      ' verifico se il materiale esiste in magazzino o devo aggiungerlo
+      Dim CurrSParam As SParam
+      Select Case EditType
+         Case AddRawPartWndVM.EditTypes.ONLY_TEXT
+            ' lo aggiungo a lista materiali in magazzino
+            CurrSParam = AddRawMaterial(dRawW, dRawL)
+         Case AddRawPartWndVM.EditTypes.ONLY_COMBO
+            ' non faccio nulla
+         Case AddRawPartWndVM.EditTypes.TEXT_AND_COMBO
+            ' verifico se lunghezza testo corrisponde a materiale
+            If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
+               CurrSParam = SParamlist.FirstOrDefault(Function(x) x.dL = AddRawPartWndVM.VariableList(0).dValue)
+            Else
+               CurrSParam = SParamlist.FirstOrDefault(Function(x) x.dL = AddRawPartWndVM.VariableList(1).dValue AndAlso x.dW = AddRawPartWndVM.VariableList(0).dValue)
+            End If
+            If IsNothing(CurrSParam) Then
+               ' lo aggiungo a lista materiali in magazzino
+               CurrSParam = AddRawMaterial(dRawW, dRawL)
+            End If
+      End Select
+      ' imposto il materiale selezionato come ultimo utilizzato
+
       Return True
    End Function
 
-   Private Function VerifyPartCount(SelPart As BTLPartVM) As Boolean
+   Private Function AddRawMaterial(dRawW As Double, ByRef dRawL As Double) As SParam
+      Dim sWarehousePath As String = Map.refMainWindowVM.MainWindowM.sWarehouseDir & "\" & WH_MEDIUM_INI_FILE_NAME
+      Dim nQuantity As Integer = GetMainPrivateProfileInt(S_WAREHOUSE, K_DEFAULTQUANTITY, 1)
+      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
+         ' creo sParam
+         Dim CurrSParam As New SParam(Map.refProjectVM.BTLStructureVM.SelBTLPart.Section, dRawL, nQuantity, False)
+         Dim sL As String = String.Empty
+         sL = LenToString(CurrSParam.dL, 3)
+         ' ricavo l'indice del SecionXMaterial dalla Beam_List
+         Dim SectXMatIndex As Integer = 1
+         Dim sSxMValue As String = ""
+         While EgtUILib.GetPrivateProfileString(S_BEAM_LIST, SectXMatIndex, String.Empty, sSxMValue, sWarehousePath)
+            If sSxMValue = CurrSParam.sValue Then
+               ' se l'ho trovato esco dal while, il SectXMatIndex è l'indice che cercavamo
+               Exit While
+            End If
+            SectXMatIndex += 1
+         End While
+         ' ricavo nuovo indice materiale
+         Dim ParamIndex As Integer = 1
+         Dim sParam As String = ""
+         While GetPrivateProfileString(S_BEAM, K_L & ParamIndex, "", sParam, sWarehousePath) > 0
+            ParamIndex += 1
+         End While
+         ' lo aggiungo in warehouse
+         WritePrivateProfileString(S_BEAM, K_L & ParamIndex,
+                                            SectXMatIndex & "," & sL & "," & CurrSParam.nQuantity & "," & If(CurrSParam.bActive, 1, 0),
+                                            sWarehousePath)
+         Return CurrSParam
+      ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then
+         ' creo sParam
+         Dim CurrSParam As New SParam(Map.refProjectVM.BTLStructureVM.SelBTLPart.Section, dRawW, dRawL, nQuantity, False)
+         Dim sW As String = String.Empty
+         Dim sL As String = String.Empty
+         sW = LenToString(CurrSParam.dW, 3)
+         sL = LenToString(CurrSParam.dL, 3)
+         ' ricavo l'indice del SecionXMaterial dalla Wall_List
+         Dim SectXMatIndex As Integer = 1
+         Dim sSxMValue As String = ""
+         While EgtUILib.GetPrivateProfileString(S_WALL_LIST, SectXMatIndex, String.Empty, sSxMValue, sWarehousePath)
+            If sSxMValue = CurrSParam.sValue Then
+               ' se l'ho trovato esco dal while, il SectXMatIndex è l'indice che cercavamo
+               Exit While
+            End If
+            SectXMatIndex += 1
+         End While
+         ' ricavo nuovo indice materiale
+         Dim ParamIndex As Integer = 1
+         Dim sParam As String = ""
+         While GetPrivateProfileString(S_WALL, K_S & ParamIndex, "", sParam, sWarehousePath) = 0
+            ParamIndex += 1
+         End While
+         ' lo aggiungo in warehouse
+         WritePrivateProfileString(S_WALL, K_S & ParamIndex,
+                                            SectXMatIndex & "," & sW & "," & sL & "," & CurrSParam.nQuantity & "," & If(CurrSParam.bActive, 1, 0),
+                                            sWarehousePath)
+         Return CurrSParam
+      End If
+   End Function
+
+   Private Function VerifyPartCount(SelParts As List(Of BTLPartVM)) As Boolean
       ' verifico se ci sono pezzi da aggiungere
-      If Not SelPart.CanAddPartToCount Then
+      Dim ToAddList As New List(Of String)
-         ' se non ci sono, chiedo se aggiungerne uno nuovo
+      Dim ToAddVM As New List(Of BTLPartVM)
-         If MessageBox.Show(EgtMsg(61863) &
+      For Each SelPart In SelParts
-                            SelPart.nCNT & EgtMsg(61864) & SelPart.nADDED & EgtMsg(61865), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+         If Not SelPart.CanAddPartToCount Then
-            SelPart.AddNewPartToAdded()
+            ToAddList.Add(SelPart.nCNT & EgtMsg(61864) & SelPart.nADDED & EgtMsg(61865))
+            ToAddVM.Add(SelPart)
+         End If
+      Next
+      ' se non ci sono, chiedo se aggiungerne uno nuovo
+      If ToAddList.Count > 0 Then
+         Dim sMessage As String = EgtMsg(61863) & Environment.NewLine
+         For Each sPart In ToAddList
+            sMessage &= " - " & sPart & Environment.NewLine
+         Next
+         If MessageBox.Show(sMessage & EgtMsg(61893), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+            For Each PartVM In ToAddVM
+               PartVM.AddNewPartToAdded()
+            Next
          Else
             Return False
          End If
@@ -500,6 +656,29 @@ Public Class LeftPanelVM
 
 #End Region    ' NewRawPart
 
+#Region "NewRawPartLast"
+
+   ''' <summary>
+   ''' Returns a command that do Exec.
+   ''' </summary>
+   Public ReadOnly Property NewRawPartLast_Command As ICommand
+      Get
+         If m_cmdNewRawPartLast Is Nothing Then
+            m_cmdNewRawPartLast = New Command(AddressOf NewRawPartLast)
+         End If
+         Return m_cmdNewRawPartLast
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Exec.  This method is invoked by the ExecCommand.
+   ''' </summary>
+   Public Sub NewRawPartLast()
+      NewRawPart(True)
+   End Sub
+
+#End Region    ' NewRawPartLast
+
 #Region "AddToRawPart"
 
    ''' <summary>
@@ -520,13 +699,25 @@ Public Class LeftPanelVM
    Public Sub AddToRawPart()
       If IsNothing(Map.refProdManagerVM.CurrProd) Then Return
       Dim SelPart As BTLPartVM = Map.refProjectVM.BTLStructureVM.SelBTLPart
+      Dim SelParts As List(Of BTLPartVM) = Map.refProjectVM.BTLStructureVM.SelBTLParts.ToList()
+      For Index = 0 To SelParts.Count() - 1
+         If IsNothing(SelParts(Index)) Then
+            SelParts.RemoveAt(Index)
+         End If
+      Next
       If IsNothing(SelPart) Then Return
+      If IsNothing(SelParts) OrElse SelParts.Count <= 0 Then Return
       Dim SelMachGroup As MyMachGroupVM = Map.refMachGroupPanelVM.SelectedMachGroup
       If IsNothing(SelMachGroup) Then Return
+      ' se pareti e piu' di uno selezionato, esco
+      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.WALL And SelParts.Count > 1 Then
+         MessageBox.Show(EgtMsg(61971), EgtMsg(30007))
+         Return
+      End If
       ' se MachGroup gia' mandato in produzione, esco
       If SelMachGroup.nProduction_State >= ItemState.Assigned Then Return
       ' verifico se sono gia' stati messi tutti i pezzi richiesti
-      If Not VerifyPartCount(SelPart) Then Return
+      If Not VerifyPartCount(SelParts) Then Return
       ' verifico se impostato gruppo di lavorazione
       Dim nCurrMachgroupId As Integer = EgtGetCurrMachGroup()
       ' se nullo o diverso da quello selezionato in lista
@@ -537,18 +728,22 @@ Public Class LeftPanelVM
       If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
          Dim BeamMachGroup As MyMachGroupVM = SelMachGroup
          ' verifico sezione e materiale
-         If SelPart.Section <> BeamMachGroup.Section Then
+         For Each Part In SelParts
-            MessageBox.Show(EgtMsg(61866), EgtMsg(30007))
+            If Part.Section <> BeamMachGroup.Section Then
-            Return
+               MessageBox.Show(EgtMsg(61866), EgtMsg(30007))
-         End If
+               Return
+            End If
+         Next
          ' verifico lunghezza totale
-         If Not VerifyTotLength(BeamMachGroup, SelPart) Then
+         If Not VerifyTotLength(BeamMachGroup, SelParts) Then
             MessageBox.Show(EgtMsg(61867), EgtMsg(30007))
             Return
          End If
-         If AddPartToBeam(BeamMachGroup, SelPart) Then
+         If AddPartToBeam(BeamMachGroup, SelParts) Then
             ' aggiorno contatore pezzi usati in Prod
-            SelPart.RefreshPartInProd()
+            For Each Part In SelParts
+               Part.RefreshPartInProd()
+            Next
             ' resetto stato di calc
             SelMachGroup.ResetCalcMachGroup()
          End If
@@ -558,7 +753,7 @@ Public Class LeftPanelVM
       ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then
          Dim WallMachGroup As MyMachGroupVM = SelMachGroup
          ' verifico spessore
-         If SelPart.dH < WallMachGroup.dH - EPS_SMALL OrElse SelPart.dH > WallMachGroup.dH + EPS_SMALL Then
+         If SelPart.Section <> WallMachGroup.Section Then
             MessageBox.Show(EgtMsg(61868), EgtMsg(30007))
             Return
          End If
@@ -575,74 +770,93 @@ Public Class LeftPanelVM
       EgtZoom(ZM.ALL)
    End Sub
 
-   Friend Function VerifyTotLength(BeamMachGroup As MyMachGroupVM, PartToAdd As BTLPartVM) As Boolean
+   Friend Function VerifyTotLength(BeamMachGroup As MyMachGroupVM, PartsToAdd As List(Of BTLPartVM)) As Boolean
       Dim dNewPartPos As Double = 0
       If BeamMachGroup.PartVMList.Count > 0 Then
          Dim LastPart As PartVM = BeamMachGroup.PartVMList(BeamMachGroup.PartVMList.Count - 1)
          dNewPartPos += LastPart.dPOSX + LastPart.dL
       End If
-      dNewPartPos += WarehouseHelper.GetOffset(BeamMachGroup.nType) + PartToAdd.dL
+      For Each Part In PartsToAdd
+         dNewPartPos += WarehouseHelper.GetOffset(BeamMachGroup.nType) + Part.dL
+      Next
       Return dNewPartPos < BeamMachGroup.dL
    End Function
 
-   Friend Function AddPartToBeam(BeamMachGroup As MyMachGroupVM, PartToAdd As BTLPartVM) As Boolean
+   Friend Function AddPartToBeam(BeamMachGroup As MyMachGroupVM, PartsToAdd As List(Of BTLPartVM)) As Boolean
-      ' creo copia del pezzo
+      ' ordino i pezzi da aggiungere
-      Dim nPartDuploId As Integer = EgtDuploNew(PartToAdd.nPartId)
+      PartsToAdd = PartsToAdd.OrderBy(Function(x) x.dL).ToList()
-      ' lo rendo std
+      ' creo copie dei pezzi
-      EgtSetMode(nPartDuploId, GDB_MD.STD)
+      Dim nPartDuploIdList As New List(Of Integer)
+      For Each Part In PartsToAdd
+         Dim nDuploId As Integer = EgtDuploNew(Part.nPartId)
+         ' elimino valori calcolo dell'originale
+         MyMachGroupPanelVM.DuploRemoveProjCalc(nDuploId)
+         ' lo rendo std
+         EgtSetMode(nDuploId, GDB_MD.STD)
+         nPartDuploIdList.Add(nDuploId)
+      Next
       ' calcolo posizione nuovo pezzo per rispettare ordine lunghezze
       Dim nInsertIndex As Integer
       ' scrivo dati di tutti i pezzi
       Dim dPosX As Double = BeamMachGroup.dStartCut
-      Dim bPartAdded As Boolean = False
+      Dim nPartIndex As Integer = 0
       Dim nIndex As Integer
       ' ciclo sui pezzi
       For nIndex = 0 To BeamMachGroup.PartVMList.Count - 1
-         ' se non ancora aggiunto e lunghezza minore del pezzo corrente, lo aggiungo
+         For PartsToAddIndex = nPartIndex To PartsToAdd.Count - 1
-         If Not bPartAdded AndAlso BeamMachGroup.PartVMList(nIndex).dL > PartToAdd.dL Then
+            Dim Part As BTLPartVM = PartsToAdd(PartsToAddIndex)
-            ' se non è primo, aggiungo offset tra barre standard
+            ' se non ancora aggiunto e lunghezza minore del pezzo corrente, lo aggiungo
-            If nIndex <> 0 Then
+            If nPartIndex < nPartDuploIdList.Count() AndAlso BeamMachGroup.PartVMList(nIndex).dL > Part.dL Then
-               dPosX += WarehouseHelper.GetOffset(BeamMachGroup.nType)
+               ' se non è primo, aggiungo offset tra barre standard
+               If nIndex <> 0 OrElse nPartIndex <> 0 Then
+                  dPosX += WarehouseHelper.GetOffset(BeamMachGroup.nType)
+               End If
+               EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + nPartIndex + 1, nPartDuploIdList(nPartIndex) & "," & DoubleToString(dPosX, 3))
+               ' incremento posizione della sua lunghezza
+               dPosX += Part.dL
+               ' conservo indice d'inserimento
+               nInsertIndex = nIndex
+               nPartIndex += 1
+            Else
+               Exit For
             End If
-            EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + 1, nPartDuploId & "," & DoubleToString(dPosX, 3))
+         Next
-            ' incremento posizione della sua lunghezza
-            dPosX += PartToAdd.dL
-            ' conservo indice d'inserimento
-            nInsertIndex = nIndex
-            bPartAdded = True
-         End If
          ' se non è primo, aggiungo offset del pezzo
          If nIndex <> 0 Then
             dPosX += BeamMachGroup.PartVMList(nIndex).dOffset
             ' se sono a indice primo ed è stato aggiunto pezzo nuovo
-         ElseIf nIndex = 0 AndAlso bPartAdded Then
+         ElseIf nIndex = 0 AndAlso nPartIndex > 0 Then
             ' aggiungo offset tra barre standard
             dPosX += WarehouseHelper.GetOffset(BeamMachGroup.nType)
          End If
-         EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + If(bPartAdded, 2, 1), BeamMachGroup.PartVMList(nIndex).nPartId & "," & DoubleToString(dPosX, 3))
+         EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + nPartIndex + 1, BeamMachGroup.PartVMList(nIndex).nPartId & "," & DoubleToString(dPosX, 3))
          ' incremento posizione della sua lunghezza
          dPosX += BeamMachGroup.PartVMList(nIndex).dL
       Next
       ' se non è ancora stato aggiunto
-      If Not bPartAdded Then
+      For PartsToAddIndex = nPartIndex To PartsToAdd.Count - 1
          ' aggiungo offset tra barre standard
          dPosX += WarehouseHelper.GetOffset(BeamMachGroup.nType)
          ' lo aggiungo in fondo
-         EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + 1, nPartDuploId & "," & DoubleToString(dPosX, 3))
+         EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + nPartIndex + 1, nPartDuploIdList(nPartIndex) & "," & DoubleToString(dPosX, 3))
          ' conservo indice d'inserimento
          nInsertIndex = nIndex
-      End If
+         nPartIndex += 1
+      Next
       ' elimino vecchio grezzo ed eseguo script creazione nuovo
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
          EgtRemoveRawPart(nRawId)
          nRawId = EgtGetFirstRawPart()
       End While
-      If Not ExecBeam(Map.refMainWindowVM.MainWindowM.sTempDir, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
+      Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
+      If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
          Return False
       End If
-      EgtSetInfo(nPartDuploId, MGR_PRT_ROT, PartToAdd.nROTATED)
+      For nDuploIndex = 0 To PartsToAdd.Count - 1
-      EgtSetInfo(nPartDuploId, MGR_PRT_FLIP, PartToAdd.nINVERTED)
+         EgtSetInfo(nPartDuploIdList(nDuploIndex), MGR_PRT_ROT, PartsToAdd(nDuploIndex).nROTATED)
+         EgtSetInfo(nPartDuploIdList(nDuploIndex), MGR_PRT_FLIP, PartsToAdd(nDuploIndex).nINVERTED)
+      Next
       ' aggiorno lista pezzi
       BeamMachGroup.MyMachGroupM.RefreshPartList()
       ' seleziono pezzo aggiunto
@@ -756,7 +970,7 @@ Public Class LeftPanelVM
       Dim NewPart As BTLPartM = SelPart.Copy()
       If Not IsNothing(NewPart) Then
          ' selezione ultimo che e' quello appena creato
-         Map.refProjectVM.BTLStructureVM.SetSelBTLPart(Map.refProjectVM.BTLStructureVM.BTLPartVMList(Map.refProjectVM.BTLStructureVM.BTLPartVMList.Count - 1))
+         Map.refProjectVM.BTLStructureVM.SetSelBTLPart(Map.refProjectVM.BTLStructureVM.BTLPartVMList(Map.refProjectVM.BTLStructureVM.BTLPartVMList.Count - 1), False, True)
       End If
    End Sub
 
@@ -945,16 +1159,25 @@ Public Class LeftPanelVM
       If IsNothing(Map.refProjManagerVM.CurrProj) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) Then Return
       ' salvo sezione impostata
       Dim CurrSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SelSection
+      ' se modalita' assemblato
+      Dim bShowBuilding As Boolean = Map.refShowBeamPanelVM.ShowBuilding_IsChecked
+      If bShowBuilding AndAlso Map.refShowBeamPanelVM.bShowAll Then
+         ' devo smontarlo prima di ruotare le travi
+         Map.refProjectVM.BTLStructureVM.ShowBuilding(False, False)
+      End If
       ' ruoto i pezzi selezionati
       For Each Part In Map.refProjectVM.BTLStructureVM.SelBTLParts
-         Part.BackRotation()
+         Part.BackRotation(False, False)
       Next
+      ' se assemblato lo ripristino
+      If bShowBuilding Then Map.refProjectVM.BTLStructureVM.ShowBuilding(True, False)
       ' se progetto travi e sezione precedente diversa da vuota (tutti i pezzi)
       If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM AndAlso CurrSection <> SectionXMaterial.Empty Then
          ' se esiste, imposto sezione inversa
          Dim InverseSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SectionList.FirstOrDefault(Function(x) x.dH = CurrSection.dW AndAlso x.dW = CurrSection.dH AndAlso x.sMaterial(0) = CurrSection.sMaterial(0))
          If Not IsNothing(InverseSection) Then Map.refProjectVM.BTLStructureVM.SetSelSection(InverseSection)
       End If
+      EgtDraw()
    End Sub
 
 #End Region    ' BackRotation
@@ -980,16 +1203,25 @@ Public Class LeftPanelVM
       If IsNothing(Map.refProjManagerVM.CurrProj) OrElse IsNothing(Map.refProjectVM.BTLStructureVM) Then Return
       ' salvo sezione impostata
       Dim CurrSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SelSection
+      ' se modalita' assemblato
+      Dim bShowBuilding As Boolean = Map.refShowBeamPanelVM.ShowBuilding_IsChecked
+      If bShowBuilding AndAlso Map.refShowBeamPanelVM.bShowAll Then
+         ' devo smontarlo prima di ruotare le travi
+         Map.refProjectVM.BTLStructureVM.ShowBuilding(False, False)
+      End If
       ' ruoto i pezzi selezionati
       For Each Part In Map.refProjectVM.BTLStructureVM.SelBTLParts
-         Part.ForwardRotation()
+         Part.ForwardRotation(False, False)
       Next
+      ' se assemblato lo ripristino
+      If bShowBuilding Then Map.refProjectVM.BTLStructureVM.ShowBuilding(True, False)
       ' se progetto travi e sezione precedente diversa da vuota (tutti i pezzi)
       If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM AndAlso CurrSection <> SectionXMaterial.Empty Then
          ' se esiste, imposto sezione inversa
          Dim InverseSection As SectionXMaterial = Map.refProjectVM.BTLStructureVM.SectionList.FirstOrDefault(Function(x) x.dH = CurrSection.dW AndAlso x.dW = CurrSection.dH AndAlso x.sMaterial(0) = CurrSection.sMaterial(0))
          If Not IsNothing(InverseSection) Then Map.refProjectVM.BTLStructureVM.SetSelSection(InverseSection)
       End If
+      EgtDraw()
    End Sub
 
 #End Region    ' ForwardRotation

EgtBEAMWALL.ViewerOptimizer/MachGroupPanel/MyMachGroupPanelVM.vb

@@ -241,5 +241,4 @@ Public Class MyMachGroupPanelVM
 
 #End Region    ' METHODS
 
-
 End Class

EgtBEAMWALL.ViewerOptimizer/MachGroupPanel/MyMachGroupVM.vb

@@ -278,6 +278,38 @@ Public Class MyMachGroupVM
 
 #End Region    ' Beam
 
+#Region "Wall"
+
+   Public Property sPosZ As String
+      Get
+         Return LenToString(MyMachGroupM.dPosZ, 3)
+      End Get
+      Set(value As String)
+         Dim dValue As Double
+         If StringToLen(value, dValue) Then
+            Dim nRawPartId As Integer = EgtGetFirstRawPart()
+            If dValue <> MyMachGroupM.dPosZ Then
+               Select Case nType
+                  Case BWType.BEAM
+                     ' non utilizzato
+                  Case BWType.WALL
+                     ' se operazione di spostamento in z ha successo
+                     If True Then
+                        EgtSetInfo(Id, MGR_RPT_PANELPOSZ, dValue)
+                        EgtDraw()
+                        MyMachGroupM.dPosZ = dValue
+                     Else
+                        NotifyPropertyChanged(NameOf(sPosZ))
+                     End If
+               End Select
+               ResetCalcTotalMachGroup()
+            End If
+         End If
+      End Set
+   End Property
+
+#End Region    ' Wall
+
 #End Region    ' FIELDS & PROPERTIES
 
 #Region "CONSTRUCTORS"
@@ -305,7 +337,7 @@ Public Class MyMachGroupVM
 
    End Sub
 
-   Public Function Copy(Optional Qty As Integer = 1) As Core.MyMachGroupVM
+   Public Shadows Function Copy(Optional Qty As Integer = 1) As Core.MyMachGroupVM
       Dim BeamWallMachGroup As MyMachGroupVM = Nothing
       If nType = BWType.BEAM Then
          EgtResetCurrMachGroup()
@@ -479,7 +511,8 @@ Public Class MyMachGroupVM
          EgtRemoveRawPart(nRawId)
          nRawId = EgtGetFirstRawPart()
       End While
-      If Not ExecBeam(Map.refMainWindowVM.MainWindowM.sTempDir, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then Return False
+      Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
+      If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then Return False
 
       Return True
    End Function

EgtBEAMWALL.ViewerOptimizer/MachGroupPanel/PartVM.vb

@@ -17,7 +17,7 @@ Public Class PartVM
    ' variabile che indica se almeno un pezzo e' stato modificato durante il caricamento del progetto
    Private Shared m_PartModifiedOnLoading As Boolean = False
 
-   Public ReadOnly Property dVolume As Double
+   Public Overloads ReadOnly Property dVolume As Double
       Get
          Return dVolume
       End Get
@@ -72,6 +72,7 @@ Public Class PartVM
                BeamMachGroup.dStartCut = dOldValue
                BeamMachGroup.ReDrawBeamMachgroup()
             End If
+            EgtDraw()
             ' resetto validazione del pezzo
             ResetCalcPart()
             ParentMachGroupVM.UpdateUsage()

EgtBEAMWALL.ViewerOptimizer/MainWindow/MainWindowM.vb

@@ -227,8 +227,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2407, 1, m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2411, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2407, 1, m_nKeyOptions)
+                            EgtGetKeyOptions(5327, 2411, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & VWOPTGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.ViewerOptimizer/My Project/AssemblyInfo.vb

@@ -14,18 +14,18 @@ Imports System.Windows
 #If PLATFORM = "x64" Then
 #If DEBUG Then
 <Assembly: AssemblyTitle("EgtBEAMWALL.ViewerOptimizerD64.exe")>
-<Assembly: AssemblyDescription("EgtBEAMWALL.ViewerOptimizer Debug 64 bit")>
+<Assembly: AssemblyDescription("EgtBEAMWALL VO Debug 64 bit")>
 #Else
 <Assembly: AssemblyTitle("EgtBEAMWALL.ViewerOptimizerR64.exe")>
-<Assembly: AssemblyDescription("EgtBEAMWALL.ViewerOptimizer 64 bit")>
+<Assembly: AssemblyDescription("EgtBEAMWALL VO 64 bit")>
 #End if
 #Else
 #If DEBUG Then
 <Assembly: AssemblyTitle("EgtBEAMWALL.ViewerOptimizerD32.exe")>
-<Assembly: AssemblyDescription("EgtBEAMWALL Debug 32 bit")>
+<Assembly: AssemblyDescription("EgtBEAMWALL VO Debug 32 bit")>
 #Else
 <Assembly: AssemblyTitle("EgtBEAMWALL.ViewerOptimizerR32.exe")>
-<Assembly: AssemblyDescription("EgtBEAMWALL 32 bit")>
+<Assembly: AssemblyDescription("EgtBEAMWALL VO 32 bit")>
 #End If
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.7.1")>
+<Assembly: AssemblyVersion("2.4.11.3")>
-<Assembly: AssemblyFileVersion("2.4.7.1")>
+<Assembly: AssemblyFileVersion("2.4.11.3")>

EgtBEAMWALL.ViewerOptimizer/ProdManager/ProdManagerVM.vb

@@ -114,6 +114,11 @@ Public Class ProdManagerVM
          Return EgtMsg(61922)
       End Get
    End Property
+   Public ReadOnly Property GoToSupervisor_ToolTip As String
+      Get
+         Return EgtMsg(61974)
+      End Get
+   End Property
 
 #End Region ' ToolTip
 

EgtBEAMWALL.ViewerOptimizer/ProjManager/ProjManagerVM.vb

@@ -643,7 +643,7 @@ Public Class ProjManagerVM
       Dim Machine As Machine = Nothing
       Dim nType As BWType = BWType.NULL
       Dim ProjectTypeWndVM As New ProjectTypeWndVM()
-      If ProjectTypeWndVM.MachineList.Count = 1 And DirectCast(ProjectTypeWndVM.SelMachine, MyMachine).nType <> MachineType.BOTH Then
+      If ProjectTypeWndVM.MachineList.Count = 1 AndAlso DirectCast(ProjectTypeWndVM.SelMachine, MyMachine).nType <> MachineType.BOTH Then
          Machine = ProjectTypeWndVM.SelMachine
          nType = DirectCast(Machine, MyMachine).nType
       Else
@@ -709,7 +709,7 @@ Public Class ProjManagerVM
          If nType = BWType.WALL AndAlso (CurrentMachine.ViewDir = VT.ISO_NW OrElse CurrentMachine.ViewDir = VT.ISO_NE) Then
             ' ruoto le pareti di 180 per raddrizzarle rispetto alla vista
             For Each Wall In Map.refProjectVM.BTLStructureVM.BTLPartVMList
-               Wall.Rotation(True, Map.refProjectVM.BTLStructureVM.nPROJTYPE, 180, False)
+               Wall.Rotation(True, Map.refProjectVM.BTLStructureVM.nPROJTYPE, True, 180, False)
             Next
          End If
          ' calcolo volumi pezzi
@@ -1270,7 +1270,7 @@ Public Class ProjManagerVM
                   ' se progetto pareti e vista ruotata
                   If nType = BWType.WALL AndAlso (CurrentMachine.ViewDir = VT.ISO_NW OrElse CurrentMachine.ViewDir = VT.ISO_NE) Then
                      ' ruoto le pareti di 180 per raddrizzarle rispetto alla vista
-                     AddedBTLPart.Rotation(True, Map.refProjectVM.BTLStructureVM.nPROJTYPE, 180, False)
+                     AddedBTLPart.Rotation(True, Map.refProjectVM.BTLStructureVM.nPROJTYPE, True, 180, False)
                   End If
                   ' verifico se aggiungere sezione alla lista
                   If Not Map.refProjectVM.BTLStructureVM.SectionList.Contains(AddedBTLPart.Section) Then

EgtBEAMWALL.ViewerOptimizer/SetUp/SetUpVM.vb

@@ -3,6 +3,7 @@ Imports System.ComponentModel
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
+Imports EgtBEAMWALL.Core
 
 Public Class SetUpVM
    Inherits VMBase

EgtBEAMWALL.ViewerOptimizer/StatisticsTimePanel/StatisticsTimePanelV.xaml

@@ -9,6 +9,7 @@
                               Style="{StaticResource ToolBar_EgtFloatingPanel}">
 
    <Border BorderThickness="2"
+           ToolTip="{Binding TotalTime_ToolTip}"
            BorderBrush="Crimson"
            Background="{StaticResource Omag_LightGray}"
            Padding="5,0,5,0"
@@ -21,6 +22,7 @@
                  VerticalAlignment="Center"/>
    </Border>
    <Border BorderThickness="2"
+           ToolTip="{Binding TotalTime_ToolTip}"
            BorderBrush="Crimson"
            Background="{StaticResource Omag_LightGray}"
            Padding="5,0,5,0"
@@ -33,6 +35,7 @@
                  VerticalAlignment="Center"/>
    </Border>
    <Border BorderThickness="2"
+           ToolTip="{Binding DoneTime_ToolTip}"
            BorderBrush="Gold"
            Padding="5,0,5,0"
            Margin="2"
@@ -44,6 +47,7 @@
                  VerticalAlignment="Center"/>
    </Border>
    <Border BorderThickness="2"
+           ToolTip="{Binding RemainingTime_ToolTip}"
            BorderBrush="White"
            Padding="5,0,5,0"
            Margin="2"

EgtBEAMWALL.ViewerOptimizer/StatisticsTimePanel/StatisticsTimePanelVM.vb

@@ -23,6 +23,24 @@ Public Class StatisticsTimePanelVM
 
 #Region "ToolTip"
 
+   Public ReadOnly Property TotalTime_ToolTip As String
+      Get
+         Return EgtMsg(61978)
+      End Get
+   End Property
+
+   Public ReadOnly Property DoneTime_ToolTip As String
+      Get
+         Return EgtMsg(61979)
+      End Get
+   End Property
+
+   Public ReadOnly Property RemainingTime_ToolTip As String
+      Get
+         Return EgtMsg(61980)
+      End Get
+   End Property
+
 #End Region ' ToolTip
 
 #End Region    ' Fields & Properties

EgtBEAMWALL.ViewerOptimizer/ToolsDbWindow/MyToolDbWindowVM.vb

@@ -4,7 +4,7 @@ Imports System.Reflection
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
-Imports EgtBEAMWALL.Core.ConstGen
+Imports EgtBEAMWALL.Core
 
 Public Class MyToolDbWindowVM
    Inherits ToolDbWindowVM

EgtBEAMWALL.ViewerOptimizer/TopPanel/TopPanelV.xaml

@@ -58,6 +58,12 @@
                              Style="{StaticResource LeftPanel_Button}">
                         <Image Source="/Resources/TopPanel/RemoveRawPart.png" Stretch="Uniform"/>
                      </Button>
+                     <Button Command="{Binding RemoveAllRawPart_Command}"
+                             ToolTip="{Binding RemoveAllRawPart_ToolTip}"
+                             IsEnabled="{Binding TopPanel_IsEnabled}"
+                             Style="{StaticResource LeftPanel_Button}">
+                        <Image Source="/Resources/TopPanel/RemoveAllRawPart.png" Stretch="Uniform"/>
+                     </Button>
                      <Button Command="{Binding MovePartInRawPart_Command}"
                              ToolTip="{Binding MovePartInRawPart_ToolTip}"
                              IsEnabled="{Binding TopPanel_IsEnabled}"

EgtBEAMWALL.ViewerOptimizer/TopPanel/TopPanelVM.vb

@@ -80,6 +80,7 @@ Public Class TopPanelVM
    Private m_cmdProduceRawPart As ICommand
    Private m_cmdCopyRawPart As ICommand
    Private m_cmdRemoveRawPart As ICommand
+   Private m_cmdRemoveAllRawPart As ICommand
    Private m_cmdRemovePart As ICommand
    Private m_cmdMoveUpPart As ICommand
    Private m_cmdMoveDownPart As ICommand
@@ -127,6 +128,12 @@ Public Class TopPanelVM
       End Get
    End Property
 
+   Public ReadOnly Property RemoveAllRawPart_ToolTip As String
+      Get
+         Return EgtMsg(61976)
+      End Get
+   End Property
+
    Public ReadOnly Property ReOrderPart_ToolTip As String
       Get
          Return EgtMsg(61916)
@@ -292,7 +299,7 @@ Public Class TopPanelVM
    Public Sub ProduceAllRawPart()
       If IsNothing(Map.refProdManagerVM.CurrProd) Then Return
       ' se attiva opzione e non ancora calcolato
-      If GetMainPrivateProfileInt(S_GENERAL, K_FASTPRODUCE, 0) = 1 And Map.refMachGroupPanelVM.MachGroupVMList.Any(Function(x As MyMachGroupVM) x.nGlobalState = CalcStates.NOTCALCULATED) Then
+      If GetMainPrivateProfileInt(S_GENERAL, K_FASTPRODUCE, 0) = 1 And Map.refMachGroupPanelVM.MachGroupVMList.Any(Function(x As MyMachGroupVM) x.nProduction_State = ItemState.ND AndAlso x.nGlobalState = CalcStates.NOTCALCULATED) Then
          Map.refCALCPanelVM.SetFromProduce(CALCPanelVM.ProduceType.PRODUCEALL)
          Map.refCALCPanelVM.VerifyAll()
          Return
@@ -365,7 +372,7 @@ Public Class TopPanelVM
    Public ReadOnly Property RemoveRawPart_Command As ICommand
       Get
          If m_cmdRemoveRawPart Is Nothing Then
-            m_cmdRemoveRawPart = New Command(AddressOf RemoveRawPart)
+            m_cmdRemoveRawPart = New Command(AddressOf RemoveRawPartCmd)
          End If
          Return m_cmdRemoveRawPart
       End Get
@@ -374,10 +381,14 @@ Public Class TopPanelVM
    ''' <summary>
    ''' Execute the Exec.  This method is invoked by the ExecCommand.
    ''' </summary>
-   Public Sub RemoveRawPart()
+   Public Sub RemoveRawPartCmd()
+      RemoveRawPart()
+   End Sub
+
+   Public Sub RemoveRawPart(Optional bAll As Boolean = False)
       If IsNothing(Map.refProdManagerVM.CurrProd) Then Return
       ' se premuto shift
-      If (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift Then
+      If bAll Then
          ' cancello tutti
          For Index = Map.refMachGroupPanelVM.MachGroupVMList.Count - 1 To 0 Step -1
             Dim CurrMachGroup As MyMachGroupVM = Map.refMachGroupPanelVM.MachGroupVMList(Index)
@@ -400,6 +411,29 @@ Public Class TopPanelVM
 
 #End Region    ' RemoveRawPart
 
+#Region "RemoveAllRawPart"
+
+   ''' <summary>
+   ''' Returns a command that do Exec.
+   ''' </summary>
+   Public ReadOnly Property RemoveAllRawPart_Command As ICommand
+      Get
+         If m_cmdRemoveAllRawPart Is Nothing Then
+            m_cmdRemoveAllRawPart = New Command(AddressOf RemoveAllRawPart)
+         End If
+         Return m_cmdRemoveAllRawPart
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Exec.  This method is invoked by the ExecCommand.
+   ''' </summary>
+   Public Sub RemoveAllRawPart()
+      RemoveRawPart(True)
+   End Sub
+
+#End Region    ' RemoveRawPart
+
 #Region "RemovePart"
 
    ''' <summary>

EgtBEAMWALL.ViewerOptimizer/Utility/CurrentMachine.vb

@@ -179,8 +179,8 @@ Public Module CurrentMachine
       ' crea l'elenco dei parametri della macchina corrente
       CreateMachParams()
 
-      ' leggo parametri macchina da WallData
+      ' leggo parametri macchina da BeamData
-      If nType = MachineType.BEAM Then
+      If nType = MachineType.BEAM OrElse nType = MachineType.BOTH Then
          ' Assegno i dati
          EgtLuaCreateGlobTable("GWD")
          EgtLuaSetGlobStringVar("GWD.BASEDIR", Map.refMainWindowVM.MainWindowM.sBeamRoot)
@@ -200,7 +200,7 @@ Public Module CurrentMachine
          End If
          If bOk Then
             EgtLuaGetGlobNumVar("GWD.OVM_MID", m_dMinOffset)
-            Dim nTemp As Integer
+            Dim nTemp As Integer = 0
             EgtLuaGetGlobIntVar("GWD.SIMUL_VIEW_DIR", nTemp)
             Select Case nTemp
                Case 0
@@ -222,8 +222,9 @@ Public Module CurrentMachine
          EgtLuaResetGlobVar("GWD")
          ' aggiorno parametro in gestore viste
          Core.ViewPanelVM.UpdateMachParam(m_nViewDir)
-      End If
+      
-      If nType = MachineType.WALL Then
+      ' leggo parametri macchina da WallData
+      ElseIf nType = MachineType.WALL Then
          ' Assegno i dati
          EgtLuaCreateGlobTable("GWD")
          EgtLuaSetGlobStringVar("GWD.BASEDIR", Map.refMainWindowVM.MainWindowM.sWallRoot)
@@ -243,9 +244,11 @@ Public Module CurrentMachine
          End If
          If bOk Then
             EgtLuaGetGlobIntVar("GWD.HOR_DRILL_DIAM", m_dHorDrillDiam)
-            Dim nTemp As Integer
+            Dim nTemp As Integer = 0
             EgtLuaGetGlobIntVar("GWD.SIMUL_VIEW_DIR", nTemp)
             Select Case nTemp
+               Case 0
+                  m_nViewDir = VT.ISO_SW
                Case 1
                   m_nViewDir = VT.ISO_NW
                Case 2

EgtBEAMWALL.ViewerOptimizer/Utility/DbControllers.vb

@@ -63,11 +63,12 @@ Public Module DbControllers
                WriteMainPrivateProfileString(S_GENERAL, K_DBMASTERKEY, nKey)
             End If
          End If
-            DataLayer.DbConfig.InitDb(DbAddress, sUser, sPwd, sDbMasterKey)
+         DataLayer.DbConfig.InitDb(DbAddress, sUser, sPwd, sDbMasterKey)
          DataLayer.DbConfig.SetupLogDir(Map.refMainWindowVM.MainWindowM.sTempDir)
          DataLayer.DbConfig.CheckMigrateDb()
-         DataLayer.DbConfig.CheckUser(sUser, sPwd, Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK))
+         DataLayer.DbConfig.CheckUser(sUser, sPwd, m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK))
-         If Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) And bNetwork Then
+         DataLayer.DbConfig.CheckViews(sUser, sPwd)
+         If m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) Then
             ' imposto cartella condivisa
             GetMainPrivateProfileString(S_GENERAL, K_SHAREDFOLDER, Map.refMainWindowVM.MainWindowM.sDataDir, sSharedFolder)
             Map.refMainWindowVM.MainWindowM.UpdatePathForNetwork(sSharedFolder)

EgtBEAMWALL.ViewerOptimizer/Utility/Dictionary.xaml

@@ -383,7 +383,7 @@
       <Setter Property="Margin" Value="5"/>
    </Style>
 
-   <Style TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}">
+   <Style x:Key="FreeContour_TextBox" TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}">
       <Setter Property="Height" Value="22"/>
       <Setter Property="VerticalContentAlignment" Value="Center"/>
       <Setter Property="HorizontalContentAlignment" Value="Right"/>

EgtBEAMWALL.ViewerOptimizer/Utility/PartsObservableCollection.vb

@@ -4,7 +4,7 @@ Public Class PartsObservableCollection(Of T)
    Inherits ObservableCollection(Of T)
 
    Public Sub AddToList(item As T)
-      If Contains(item) Then Return
+      If IsNothing(item) OrElse Contains(item) Then Return
       Add(item)
    End Sub
 

EgtBEAMWALL.ViewerOptimizer/WarehouseWnd/WarehouseHelper.vb

@@ -250,4 +250,85 @@ Module WarehouseHelper
          SectXMat.dW >= 0
    End Function
 
+   Friend Function GetLastMaterial(SectXMat As SectionXMaterial) As SParam
+      Dim sWarehousePath As String = Map.refMainWindowVM.MainWindowM.sWarehouseDir & "\" & WH_MEDIUM_INI_FILE_NAME
+      'If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
+      '   Dim ParamIndex As Integer = 1
+      '   Dim sSxMValue As String = ""
+      '   While EgtUILib.GetPrivateProfileString(S_BEAM_LIST, ParamIndex, String.Empty, sSxMValue, sWarehousePath) > 0
+      '      Dim sSectXMatValues() As String = sSxMValue.Split(","c)
+      '      ' creo parametro
+      '      Dim dW As Double = 0
+      '      Dim dH As Double = 0
+      '      Dim sMaterial As String = sSectXMatValues(2)
+      '      StringToLen(sSectXMatValues(0), dW)
+      '      StringToLen(sSectXMatValues(1), dH)
+      '      If SectXMat.dW = dW AndAlso SectXMat.dH = dH AndAlso SectXMat.sMaterial(0) = sMaterial Then
+      '         If sSectXMatValues.Length <= 3 Then Return Nothing
+      '         Dim sValue As String = ""
+      '         If EgtUILib.GetPrivateProfileString(S_BEAM, "L" & sSectXMatValues(3), String.Empty, sValue, sWarehousePath) Then
+
+      '         End If
+      '      End If
+      '   End While
+
+
+
+
+      '   If EgtUILib.GetPrivateProfileString(S_BEAM, "L" & ParamIndex, String.Empty, sValue, sWarehousePath) Then
+      '      Dim sParamValues() As String = sValue.Split(","c)
+      '      ' verifico numero minimo di parametri
+      '      If sParamValues.Count < 2 Then Return Nothing
+      '      ' cancello spazi
+      '      For Index = 0 To sParamValues.Count - 1
+      '         sParamValues(Index) = sParamValues(Index).Trim()
+      '      Next
+      '      ' ricavo SectionXMaterial tramite Beam_List
+      '      If EgtUILib.GetPrivateProfileString(S_BEAM_LIST, sParamValues(0), String.Empty, sSxMValue, sWarehousePath) Then
+      '         Dim sSectXMatValues() As String = sSxMValue.Split(","c)
+      '         ' creo parametro
+      '         Dim dW As Double = 0
+      '         Dim dH As Double = 0
+      '         Dim dL As Double = 0
+      '         Dim nQty As Integer = 0
+      '         Dim nActive As Integer = 1
+      '         StringToLen(sSectXMatValues(0), dW)
+      '         StringToLen(sSectXMatValues(1), dH)
+      '         StringToLen(sParamValues(1), dL)
+      '         If sParamValues.Count >= 3 Then Integer.TryParse(sParamValues(2), nQty)
+      '         If sParamValues.Count >= 4 Then Integer.TryParse(sParamValues(3), nActive)
+      '         Return New SParam(New SectionXMaterial(dW, dH, dL, sSectXMatValues(2)), dL, nQty, nActive > 0)
+      '      End If
+      '   End If
+      'ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then
+      '   If EgtUILib.GetPrivateProfileString(S_WALL, "S" & ParamIndex, String.Empty, sValue, sWarehousePath) Then
+      '      Dim sParamValues() As String = sValue.Split(","c)
+      '      ' verifico numero minimo di parametri
+      '      If sParamValues.Count >= 3 Then
+      '         ' cancello spazi
+      '         For Index = 0 To sParamValues.Count - 1
+      '            sParamValues(Index) = sParamValues(Index).Trim()
+      '         Next
+      '         ' ricavo SectionXMaterial tramite Wall_List
+      '         If EgtUILib.GetPrivateProfileString(S_WALL_LIST, sParamValues(0), String.Empty, sSxMValue, sWarehousePath) Then
+      '            Dim sSectXMatValues() As String = sSxMValue.Split(","c)
+      '            ' creo parametro
+      '            Dim dH As Double = 0
+      '            Dim dW As Double = 0
+      '            Dim dL As Double = 0
+      '            Dim nQty As Integer = 0
+      '            Dim nActive As Integer = 1
+      '            StringToLen(sSectXMatValues(0), dH)
+      '            StringToLen(sParamValues(1), dW)
+      '            StringToLen(sParamValues(2), dL)
+      '            If sParamValues.Count >= 4 Then Integer.TryParse(sParamValues(3), nQty)
+      '            If sParamValues.Count >= 5 Then Integer.TryParse(sParamValues(4), nActive)
+      '            Return New SParam(New SectionXMaterial(dW, dH, dL, sSectXMatValues(1)), dW, dL, nQty, nActive > 0)
+      '         End If
+      '      End If
+      '   End If
+      'End If
+
+   End Function
+
 End Module

EgtBEAMWALL.ViewerOptimizer/WarehouseWnd/WarehouseWndVM.vb

@@ -1084,7 +1084,9 @@ Public Class WarehouseWndVM
             Dim dH As Double = 0
             StringToLen(sSectXMatValues(0), dW)
             StringToLen(sSectXMatValues(1), dH)
-            SectXMatList.Add(New SectionXMaterial(dW, dH, 0, sSectXMatValues(2)))
+            If Not SectXMatList.Any(Function(x) x.dW = dW AndAlso x.dH = dH AndAlso x.sMaterial(0) = sSectXMatValues(2)) Then
+               SectXMatList.Add(New SectionXMaterial(dW, dH, 0, sSectXMatValues(2)))
+            End If
             sSectXMatIndex += 1
          End While
       ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then

EgtBEAMWALL.ViewerOptimizer/app.manifest

@@ -0,0 +1,79 @@
+<?xml version="1.0" encoding="utf-8"?>
+<assembly manifestVersion="1.0" xmlns="urn:schemas-microsoft-com:asm.v1">
+  <assemblyIdentity version="1.0.0.0" name="MyApplication.app"/>
+  <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2">
+    <security>
+      <requestedPrivileges xmlns="urn:schemas-microsoft-com:asm.v3">
+        <!-- UAC Manifest Options
+             If you want to change the Windows User Account Control level replace the 
+             requestedExecutionLevel node with one of the following.
+
+        <requestedExecutionLevel  level="asInvoker" uiAccess="false" />
+        <requestedExecutionLevel  level="requireAdministrator" uiAccess="false" />
+        <requestedExecutionLevel  level="highestAvailable" uiAccess="false" />
+
+            Specifying requestedExecutionLevel element will disable file and registry virtualization. 
+            Remove this element if your application requires this virtualization for backwards
+            compatibility.
+        -->
+        <requestedExecutionLevel level="asInvoker" uiAccess="false" />
+      </requestedPrivileges>
+    </security>
+  </trustInfo>
+
+  <compatibility xmlns="urn:schemas-microsoft-com:compatibility.v1">
+    <application>
+      <!-- A list of the Windows versions that this application has been tested on
+           and is designed to work with. Uncomment the appropriate elements
+           and Windows will automatically select the most compatible environment. -->
+
+      <!-- Windows Vista -->
+      <!--<supportedOS Id="{e2011457-1546-43c5-a5fe-008deee3d3f0}" />-->
+
+      <!-- Windows 7 -->
+      <supportedOS Id="{35138b9a-5d96-4fbd-8e2d-a2440225f93a}" />
+
+      <!-- Windows 8 -->
+      <supportedOS Id="{4a2f28e3-53b9-4441-ba9c-d69d4a4a6e38}" />
+
+      <!-- Windows 8.1 -->
+      <supportedOS Id="{1f676c76-80e1-4239-95bb-83d0f6d0da78}" />
+
+      <!-- Windows 10 -->
+      <supportedOS Id="{8e0f7a12-bfb3-4fe8-b9a5-48fd50a15a9a}" />
+
+    </application>
+  </compatibility>
+
+  <!-- Indicates that the application is DPI-aware and will not be automatically scaled by Windows at higher
+       DPIs. Windows Presentation Foundation (WPF) applications are automatically DPI-aware and do not need 
+       to opt in. Windows Forms applications targeting .NET Framework 4.6 that opt into this setting, should 
+       also set the 'EnableWindowsFormsHighDpiAutoResizing' setting to 'true' in their app.config. 
+       
+       Makes the application long-path aware. See https://docs.microsoft.com/windows/win32/fileio/maximum-file-path-limitation -->
+  <!--
+  <application xmlns="urn:schemas-microsoft-com:asm.v3">
+    <windowsSettings>
+      <dpiAware xmlns="http://schemas.microsoft.com/SMI/2005/WindowsSettings">true</dpiAware>
+      <longPathAware xmlns="http://schemas.microsoft.com/SMI/2016/WindowsSettings">true</longPathAware>
+    </windowsSettings>
+  </application>
+  -->
+
+  <!-- Enable themes for Windows common controls and dialogs (Windows XP and later) -->
+  <!--
+  <dependency>
+    <dependentAssembly>
+      <assemblyIdentity
+          type="win32"
+          name="Microsoft.Windows.Common-Controls"
+          version="6.0.0.0"
+          processorArchitecture="*"
+          publicKeyToken="6595b64144ccf1df"
+          language="*"
+        />
+    </dependentAssembly>
+  </dependency>
+  -->
+
+</assembly>

ExtLibs/MySql.Data.Entity.EF6.xml

@@ -1,389 +0,0 @@
-<?xml version="1.0"?>
-<doc>
-    <assembly>
-        <name>MySql.Data.Entity.EF6</name>
-    </assembly>
-    <members>
-        <member name="T:MySql.Data.Entity.SqlFragmentVisitor">
-            <summary>
-            Visitor for SqlFragment and derived classes, useful for postprocessing and optimizations.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.ReplaceTableNameVisitor">
-            <summary>
-            Visitor to replace old table names with new table names. Used as part postprocessing of the code for fusing nested selects.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.OpType">
-            <summary>
-            Specifies the operation types supported.
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.SelectGenerator.TryFlatteningGroupBy(MySql.Data.Entity.SqlFragment)">
-            <summary>
-            If input sqlFragment is a group by structure, is flattened to remove some nested correlation queries.
-            </summary>
-            <param name="input"></param>
-            <returns></returns>
-        </member>
-        <member name="M:MySql.Data.Entity.SqlGenerator.TryFusingSelect(MySql.Data.Entity.InputFragment)">
-            <summary>
-            If current fragment is select and its from clause is another select, try fuse the inner select with the outer select.
-            (Thus removing a nested query, which may have bad performance in Mysql).
-            </summary>
-            <param name="f">The fragment to probe and posibly optimize</param>
-            <returns>The fragment fused, or the original one.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.SqlGenerator.TryPromoteToLike(System.Data.Entity.Core.Common.CommandTrees.DbExpression,System.Data.Entity.Core.Common.CommandTrees.DbExpression,System.String)">
-            <summary>
-            Examines a binary expression to see if it is an special case suitable to conversion 
-            to a more efficient and equivalent LIKE sql expression.
-            </summary>
-            <param name="left"></param>
-            <param name="right"></param>
-            <param name="op"></param>
-            <returns></returns>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlConnectionFactory">
-            <summary>
-            Used for creating connections in Code First 4.3.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlDependencyResolver">
-            <summary>
-            Provides the capability to resolve a dependency.
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlDependencyResolver.GetService(System.Type,System.Object)">
-            <summary>
-            Attempts to resolve a dependency for a given contract type and optionally a given key.
-            </summary>
-            <param name="type">The base class that defines the dependency to be resolved.</param>
-            <param name="key">Optionally, the key of the dependency to be resolved.</param>
-            <returns>The resolved dependency.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlDependencyResolver.GetServices(System.Type,System.Object)">
-            <summary>
-            Attempts to resolve a dependency for all of the registered services with the given type and key combination.
-            </summary>
-            <param name="type">The base class that defines the dependency to be resolved.</param>
-            <param name="key">Optionally, the key of the dependency to be resolved.</param>
-            <returns>All services that resolve the dependency.</returns>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlProviderInvariantName">
-            <summary>
-            Used to resolve a provider invariant name from a provider factory.
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.MySqlProviderInvariantName.Name">
-            <summary>
-            Gets the name of the provider.
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.MySqlProviderInvariantName.ProviderName">
-            <summary>
-            Gets the name of the provider.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlProviderFactoryResolver">
-            <summary>
-            Service that obtains the provider factory from a given connection.
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlProviderFactoryResolver.ResolveProviderFactory(System.Data.Common.DbConnection)">
-            <summary>
-            Returns the <see cref="T:System.Data.Common.DbProviderFactory"/> for the given connection.
-            </summary>
-            <param name="connection">The database connection.</param>
-            <returns>The provider factory for the connection.</returns>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlManifestTokenResolver">
-            <summary>
-            Gets a provider manifest token for the given connection.
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlManifestTokenResolver.ResolveManifestToken(System.Data.Common.DbConnection)">
-            <summary>
-            Returns the manifest token to use for the given connection.
-            </summary>
-            <param name="connection">The connection for which a manifest token is required.</param>
-            <returns>The manifest token to use.</returns>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlModelCacheKey">
-            <summary>
-            Represents a key value that uniquely identifies an Entity Framework model that has been loaded into memory. 
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlModelCacheKey.Equals(System.Object)">
-            <summary>
-            Determines whether the current cached model key is equal to the specified cached
-            model key.
-            </summary>
-            <param name="other">The cached model key to compare to the current cached model key.</param>
-            <returns><c>true</c> if the current cached model key is equal to the specified cached model key;
-            otherwise, <c>false</c>.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlModelCacheKey.GetHashCode">
-            <summary>
-            Returns the hash function for this cached model key.
-            </summary>
-            <returns>The hash function for this cached model key.</returns>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlEFConfiguration">
-            <summary>
-            Defines the configuration of an application to be used with Entity Framework. 
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlEFConfiguration.#ctor">
-            <summary>
-            Initializes a new instance of <see cref="T:MySql.Data.Entity.MySqlEFConfiguration"/> class.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlExecutionStrategy">
-            <summary>
-            An execution strategy tailored for handling MySql Server transient errors.
-            </summary>
-        </member>
-        <member name="F:MySql.Data.Entity.MySqlExecutionStrategy.errorsToRetryOn">
-            <summary>
-            Different back off algorithms used for different errors.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithm">
-            <summary>
-            The base class for backoff algorithms.
-            </summary>
-            <remarks>Different transient error conditions require different approaches.</remarks>
-        </member>
-        <member name="M:MySql.Data.Entity.BackoffAlgorithm.GetNextDelay">
-            <summary>
-            The default implementation is an exponential delay backoff.
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="M:MySql.Data.Entity.BackoffAlgorithm.Reset">
-            <summary>
-            Resets a backoff algorithm, so they can be reused.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmErr1040">
-            <summary>
-            Back-off algorithm customized for the MySql error code 1040 - Too many connections.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmErr1614">
-            <summary>
-            Back-off algorithm for the Mysql error code 1614 - Transaction branch was rolled back: deadlock was detected.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmErr1205">
-            <summary>
-            Back-off algorithm customized for the MySql error code 1205 - Lock wait timeout exceeded; try restarting transaction.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmErr1213">
-            <summary>
-            Back-off algorithm customized for MySql error code 1213 - Deadlock found when trying to get lock; try restarting transaction.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmErr2006">
-            <summary>
-            Back-off algorithm customized for MySql error code 2006 - MySQL server has gone away.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmErr2013">
-            <summary>
-            Back-off algorithm customized for MySql error code 2013 - Lost connection to MySQL server during query.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.BackoffAlgorithmNdb">
-            <summary>
-            Back-off algorithm customized for MySql Cluster (NDB) errors.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlHistoryContext">
-            <summary>
-            Reads and writes migration history from the database during code first migrations.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlLogger">
-            <summary>
-            Enables the creation of MySQL logs for applications. 
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlMigrationCodeGenerator">
-            <summary>
-            Class used to customized code generation
-            to avoid dbo. prefix added on table names.
-            </summary>
-        </member>
-        <member name="T:MySql.Data.Entity.MySqlMigrationSqlGenerator">
-            <summary>
-            Implementation of a MySql's Sql generator for EF 4.3 data migrations.
-            </summary>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.AddColumnOperation)">
-            <summary>
-            Generates a migration operation to add a column.
-            </summary>
-            <param name="op">The operation that represents a column being added to a table.</param>
-            <returns>A migration operation to add a column.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.DropColumnOperation)">
-            <summary>
-            Generates a migration operation to drop a column.
-            </summary>
-            <param name="op">The operation that represents a column being dropped from a table.</param>
-            <returns>The migration operation to drop a column.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.AlterColumnOperation)">
-            <summary>
-            Generates a migration operation to alter a column.
-            </summary>
-            <param name="op">The operation that represents altering an existing column.</param>
-            <returns>A migration operation to alter a column.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.RenameColumnOperation)">
-            <summary>
-            Generates a migration operation to rename a column.
-            </summary>
-            <param name="op">The operation that represents a column being renamed.</param>
-            <returns>A migration operation to rename a column.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.AddForeignKeyOperation)">
-            <summary>
-            Generates a migration operation to add a foreign key.
-            </summary>
-            <param name="op">the operation that represents a foreing key constraint being added to a table.</param>
-            <returns>A migration operation to add a foreign key constraint.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.ColumnModel)">
-            <summary>
-            Generates an SQL statement of a column model.
-            </summary>
-            <param name="op">The model that represents a column.</param>
-            <returns>A string containing an SQL statement of a column model.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.DropForeignKeyOperation)">
-            <summary>
-            Generates a migration operation to drop a foreign key constraint from a table.
-            </summary>
-            <param name="op">The operation that represents a foreign key being added from a table.</param>
-            <returns>A migration operation to drop a foreign key.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.CreateIndexOperation)">
-            <summary>
-            Generates a migration operation to create a database index.
-            </summary>
-            <param name="op">The operation that represents creating a database index.</param>
-            <returns>A migration operation to create a database index.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.DropIndexOperation)">
-            <summary>
-            Generates a migration operation to drop an existing database index.
-            </summary>
-            <param name="op">The operation that represents dropping am existing database index.</param>
-            <returns>A migration operation to drop an existing database index.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.CreateTableOperation)">
-            <summary>
-            Generates a migration operation to create a table.
-            </summary>
-            <param name="op">The operation that represents creating a table.</param>
-            <returns>A migration operation to create a table.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.DropTableOperation)">
-            <summary>
-            Generates a migration operation to drop an existing table.
-            </summary>
-            <param name="op">The operation that represents dropping an existing table.</param>
-            <returns>A migration operation to drop an existing table.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.AddPrimaryKeyOperation)">
-            <summary>
-            Generates a migration operation to add a primary key to a table.
-            </summary>
-            <param name="op">The operation that represents adding a primary key to a table.</param>
-            <returns>A migration operation to add a primary key to a table.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.DropPrimaryKeyOperation)">
-            <summary>
-            Generates a migration operation to drpo an existing primary key.
-            </summary>
-            <param name="op">The operation that represents dropping an existing primary key.</param>
-            <returns>A migration operation to drop an existing primary key.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.RenameTableOperation)">
-            <summary>
-            Generates a migration operation to rename an existing table.
-            </summary>
-            <param name="op">The operation that represents renaming an existing table.</param>
-            <returns>A migration operation to rename an existing table.</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.MoveTableOperation)">
-            <summary>
-            Not implemented yet.
-            </summary>
-            <param name="op">NA</param>
-            <returns>NA</returns>
-        </member>
-        <member name="M:MySql.Data.Entity.MySqlMigrationSqlGenerator.Generate(System.Data.Entity.Migrations.Model.SqlOperation)">
-            <summary>
-            Generates a migration operation with a MySQL statement to be executed.
-            </summary>
-            <param name="op">The operation representing a MySQL statement to be executed directly against the database.</param>
-            <returns>A migration operation with a MySQL statement to be executed.</returns>
-        </member>
-        <member name="T:MySql.Data.Entity.Properties.Resources">
-            <summary>
-              A strongly-typed resource class, for looking up localized strings, etc.
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.Properties.Resources.ResourceManager">
-            <summary>
-              Returns the cached ResourceManager instance used by this class.
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.Properties.Resources.Culture">
-            <summary>
-              Overrides the current thread's CurrentUICulture property for all
-              resource lookups using this strongly typed resource class.
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.Properties.Resources.ConnectionMustBeOfTypeMySqlConnection">
-            <summary>
-              Looks up a localized string similar to The connection parameter must reference an object of type MySql.Data.MySqlConnection.
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.Properties.Resources.NoStoreTypeForEdmType">
-            <summary>
-              Looks up a localized string similar to There is no store type corresponding to the EDM type &apos;{0}&apos; of primitive type &apos;{1}&apos;..
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.Properties.Resources.TypeNotSupported">
-            <summary>
-              Looks up a localized string similar to The underlying provider does not support the type &apos;{0}&apos;..
-            </summary>
-        </member>
-        <member name="P:MySql.Data.Entity.Properties.Resources.WrongFunctionResultType">
-            <summary>
-              Looks up a localized string similar to Result type of a function is expected to be a collection of RowType or PrimitiveType.
-            </summary>
-        </member>
-        <member name="M:MySql.Data.MySqlClient.MySqlProviderServices.SetExpectedTypes(System.Data.Entity.Core.Common.CommandTrees.DbCommandTree,MySql.Data.Entity.EFMySqlCommand)">
-            <summary>
-            Sets the expected column types
-            </summary>
-        </member>
-        <member name="M:MySql.Data.MySqlClient.MySqlProviderServices.SetQueryExpectedTypes(System.Data.Entity.Core.Common.CommandTrees.DbQueryCommandTree,MySql.Data.Entity.EFMySqlCommand)">
-            <summary>
-            Sets the expected column types for a given query command tree
-            </summary>
-        </member>
-        <member name="M:MySql.Data.MySqlClient.MySqlProviderServices.SetFunctionExpectedTypes(System.Data.Entity.Core.Common.CommandTrees.DbFunctionCommandTree,MySql.Data.Entity.EFMySqlCommand)">
-            <summary>
-            Sets the expected column types for a given function command tree
-            </summary>
-        </member>
-    </members>
-</doc>