Egalware/databeamnew
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
bb82dcb7249d4ffaa66cee6964bfa144ea90facb
databeamnew/Strategies/Standard/STR0003/STR0003.lua
T
luca.mazzoleni bb82dcb724 - in MachiningLib -> StartsLeftSide contemplato ToolInvert 
- in SLOTBYBLADE aggiunta gestione lavorazioni di coda
- in STR0003 > lama aggiunta gestione lavorazioni di coda
- in Config STR0003 e STR0004 aggiunto parametro dExtendAfterTail per decidere di quanto estendere una lavorazione oltre la coda
2024-12-03 14:55:46 +01:00

498 lines
28 KiB
Lua
Raw Blame History

-- Strategia: STR0003
-- Descrizione
-- Lama + motosega per slot
-- Feature: tipo lapjoint
-- carico librerie
local BeamLib = require( 'BeamLib')
local BeamData = require( 'BeamData')
local MachiningLib = require( 'MachiningLib')
local FeatureLib = require( 'FeatureLib')
-- strategie di base
local SlotByBlade = require( 'SLOTBYBLADE')
local SlotByChainSaw = require( 'SLOTBYCHAINSAW')
-- Tabella per definizione modulo
local STR0003 = {}
local Strategy = {}
local Blade = {}
local Chainsaw = {}
Blade.Result = {}
Chainsaw.Result = {}
-------------------------------------------------------------------------------------------------------------
local function IsTopologyOk( Proc)
if Proc.Topology.bAllRightAngles and
( Proc.Topology.sName == 'Pocket-5-Blind' or
Proc.Topology.sName == 'Groove-3-Through' or
Proc.Topology.sName == 'Groove-4-Blind' or
Proc.Topology.sName == 'Tunnel-4-Through') then
return true
else
return false
end
end
local function GetCompletionPercentage( Proc, Result)
local dNotMachinedArea = 0
local dCompletionPercentage = 0
if Proc.Topology.sFamily == 'Tunnel' then
dNotMachinedArea = Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
if #Result == 2 then
dNotMachinedArea = dNotMachinedArea - Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[2].dDepthMachined)
end
else
if #Result == 1 then
dNotMachinedArea = Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
elseif #Result == 2 then
dNotMachinedArea = ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength - Result[2].dDepthMachined) * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
elseif #Result == 3 then
dNotMachinedArea = ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength - Result[2].dDepthMachined - Result[3].dDepthMachined) * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
end
end
dCompletionPercentage = 100 - dNotMachinedArea / Proc.MainFaces.LongFaces[1].dArea * 100
return dCompletionPercentage
end
local function AddResult( Machining, Result)
table.insert( Result, {})
if not Result.Bottom then
Result.Bottom = {}
end
if not Result.Side then
Result.Side = {}
end
if not Result.Opposite then
Result.Opposite = {}
end
if Machining.sEdgeType == 'Bottom' then
table.insert( Result.Bottom, Machining)
elseif Machining.sEdgeType == 'Side' then
table.insert( Result.Side, Machining)
elseif Machining.sEdgeType == 'Opposite' then
table.insert( Result.Opposite, Machining)
else
error('AddResult : unknown edge type')
end
return Result
end
function Blade.AddResult( Cutting)
AddResult( Cutting, Blade.Result)
end
function Blade.AddMachiningAllSteps( Proc, Cutting, AuxiliaryData)
local bMachiningAdded = false
if not AuxiliaryData then
AuxiliaryData = {}
end
AuxiliaryData.Clones = {}
local dOriginalRadialOffset = Cutting.dRadialOffset
local dOriginalLeadInPerpDistance = Cutting.LeadIn.dPerpDistance
local dOriginalLeadOutPerpDistance = Cutting.LeadOut.dPerpDistance
for i = 1, Cutting.HorizontalSteps.nCount do
AuxiliaryData.Clones[i] = {}
AuxiliaryData.Clones[i].LeadIn = {}
AuxiliaryData.Clones[i].LeadOut = {}
AuxiliaryData.Clones[i].dRadialOffset = dOriginalRadialOffset + Cutting.HorizontalSteps.dStep * ( Cutting.HorizontalSteps.nCount - i)
-- update distanza perpendicolare attacco per contemplare l'offset applicato
AuxiliaryData.Clones[i].LeadIn.dPerpDistance = dOriginalLeadInPerpDistance - Cutting.dRadialOffset
AuxiliaryData.Clones[i].LeadOut.dPerpDistance = dOriginalLeadOutPerpDistance - Cutting.dRadialOffset
end
bMachiningAdded = MachiningLib.AddNewMachining( Proc, Cutting, AuxiliaryData)
return bMachiningAdded
end
function Chainsaw.AddResult( Mortising)
AddResult( Mortising, Chainsaw.Result)
end
function Chainsaw.AddMachiningAllSteps( Proc, Mortising, AuxiliaryData)
local bMachiningAdded = false
if not AuxiliaryData then
AuxiliaryData = {}
end
AuxiliaryData.Clones = {}
local dOriginalRadialOffsetMortising = Mortising.dRadialOffset
for i = Mortising.VerticalSteps.nCount, 1, -1 do
AuxiliaryData.Clones[i] = {}
AuxiliaryData.Clones[i].dRadialOffset = dOriginalRadialOffsetMortising + Mortising.VerticalSteps.dStep * ( i - 1)
end
bMachiningAdded = MachiningLib.AddNewMachining( Proc, Mortising, AuxiliaryData)
return bMachiningAdded
end
function STR0003.Make( bAddMachining, Proc, Part, CustomParameters)
-- TODO da implementare gestione feature lunghe e spezzatura
-- carico parametri da default e li aggiorno con quelli passati dal chiamante (potrebbero non essere congruenti)
local StrategyLib = {}
StrategyLib.Config = require( 'STR0003\\STR0003Config')
Strategy.sName = StrategyLib.Config.sStrategyId
CustomParameters = BeamLib.GetUpdateCustomParameters( CustomParameters, StrategyLib.Config.Parameters)
Strategy.Parameters = BeamLib.LoadCustomParametersInStrategy( CustomParameters)
Strategy.Result = {}
Strategy.Result.sInfo = ''
Blade.Result = {}
Chainsaw.Result = {}
if not IsTopologyOk( Proc) then
local sErr = 'Feature '.. Proc.idFeature .. ' : strategy ' .. Strategy.sName .. ' not implemented'
EgtOutLog( sErr)
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Result.sInfo = 'Topology'
return false, Strategy.Result
end
-- se tasca su faccia sotto la strategia non è applicabile (la sega a catena in generale non può lavorare da sotto)
-- TODO se OnlySaw questo test è da rimuovere ma bisogna considerare anche la lama da sotto
if Proc.AffectedFaces.bBottom and ( Proc.nFct > 3 or not Proc.AffectedFaces.bTop) then
local sErr = 'Feature '.. Proc.idFeature .. ' : strategy ' .. Strategy.sName .. ' not applicable - pocket on bottom face'
EgtOutLog( sErr)
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Result.sInfo = 'Direction'
return false, Strategy.Result
end
local dExtendAfterTail = Strategy.Parameters.dExtendAfterTail or max( Part.dDistanceToNextPiece - BeamData.CUT_EXTRA, 0)
if MachiningLib.CanExtendAfterTail( Strategy.Parameters.sCanDamageNextPiece, Part) then
dExtendAfterTail = 10000
end
-- lama - calcolo lavorazioni
local Cutting = {}
local OptionalParameters = { bForceLongcutBlade = Strategy.Parameters.bForceLongcutBlade, dExtendAfterTail = dExtendAfterTail}
if Proc.Topology.sFamily == 'Tunnel' then
Cutting = SlotByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
else
Cutting = SlotByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
end
Blade.AddResult( Cutting)
-- lato opposto del tunnel
if Proc.Topology.sFamily == 'Tunnel' then
Cutting = SlotByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Blade.AddResult( Cutting)
else
-- se la lama non è arrivata sul fondo e c'è almeno un lato aperto va lavorato
if Blade.Result.Bottom[1].dResidualDepth > 10 * GEO.EPS_SMALL then
-- eventuale lavorazione di lama - lato della tasca da cui inizia la lavorazione
if Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen then
Cutting = SlotByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Blade.AddResult( Cutting)
end
-- eventuale lavorazione di lama - lato della tasca in cui finisce la lavorazione
if Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen then
Cutting = SlotByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
Blade.AddResult( Cutting)
end
-- la lama è arrivata sul fondo e tasca passante, non servono ulteriori lavorazioni
elseif #( Proc.MainFaces.SideFaces) == 0 then
Strategy.Parameters.bFinishWithChainSaw = false
Strategy.Parameters.bNotCompleteWithBladeRadius = false
end
end
-- lama - aggiunta lavorazioni
local nIsApplicableCount = 0
local dFinalCompletionPercentage = 100
local bAreAllMachiningsAdded = true
for i = 1, #Blade.Result.Bottom do
if Blade.Result.Bottom[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded = Blade.AddMachiningAllSteps( Proc, Blade.Result.Bottom[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Blade.Result.Bottom[i].sMessage
end
end
for i = 1, #Blade.Result.Side do
if Blade.Result.Side[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded = Blade.AddMachiningAllSteps( Proc, Blade.Result.Side[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Blade.Result.Side[i].sMessage
end
end
for i = 1, #Blade.Result.Opposite do
if Blade.Result.Opposite[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded = Blade.AddMachiningAllSteps( Proc, Blade.Result.Opposite[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Blade.Result.Opposite[i].sMessage
end
end
if nIsApplicableCount > 0 then
-- TODO sistemare il calcolo completamento - implementare calcolo area lavorata
if not Strategy.Parameters.bNotCompleteWithBladeRadius and Cutting.dCompletionPercentage > 100 - 10 * GEO.EPS_SMALL then
Strategy.Result.sStatus = 'Completed'
else
Strategy.Result.sStatus = 'Not-Completed'
-- TODO al momento si assume che la percentuale di completamento dell'ultima lavorazione sia quella rilevante
dFinalCompletionPercentage = Cutting.dCompletionPercentage
end
else
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Parameters.bFinishWithChainSaw = false
end
if not Strategy.Parameters.bFinishWithChainSaw then
Strategy.Result.nCompletionIndex = FeatureLib.GetFeatureCompletionIndex( dFinalCompletionPercentage)
Strategy.Result.nQuality = FeatureLib.GetFeatureQuality( 'Blade')
local MRRParametersBlade = {
dStep = TOOLS[Cutting.nToolIndex].dThickness,
dSideStep = min( TOOLS[Cutting.nToolIndex].dSideStep, Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength),
dFeed = TOOLS[Cutting.nToolIndex].Feeds.dFeed}
local dMRRBlade = MachiningLib.GetToolMRR( MRRParametersBlade)
Strategy.Result.dMRR = dMRRBlade
return bAreAllMachiningsAdded, Strategy.Result
end
-- sega a catena - calcolo lavorazioni
local Mortising = {}
OptionalParameters = {}
if Proc.Topology.sName == 'Groove-4-Blind' or Proc.Topology.sName == 'Pocket-5-Blind' then
-- si lavora solamente l'impronta lama sui lati chiusi
if ( Blade.Result.Bottom[1].dResidualDepth < 10 * GEO.EPS_SMALL) and
( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength > 3 * Blade.Result.Bottom[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
if not Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen then
local OptionalParameters = { sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Bottom[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
end
if not Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen then
local OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Bottom[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
end
-- si lavora tutto il fondo
else
local OptionalParameters = { dMaxElev = Blade.Result.Bottom[1].dResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
end
-- ancora materiale residuo - se possibile si lavora dal lato
if Chainsaw.Result.Bottom[#Chainsaw.Result.Bottom].dResidualDepth > 10 * GEO.EPS_SMALL and #Proc.MainFaces.SideFaces == 1 then
-- si lavora solamente l'impronta lama sul fondo
if ( #Blade.Result.Side > 0) and Blade.Result.Side[1].dResidualDepth < 10 * GEO.EPS_SMALL then
if ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength > 3 * Blade.Result.Side[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
elseif ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2].dLength > 3 * Blade.Result.Side[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
end
-- si lavora tutto il lato
else
local dBladeResidualDepth
if #Blade.Result.Side > 0 then
dBladeResidualDepth = Blade.Result.Side[1].dResidualDepth
else
dBladeResidualDepth = Blade.Result.Bottom[1].dResidualDepth
end
if Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen then
local OptionalParameters = { dMaxElev = dBladeResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
elseif Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen then
local OptionalParameters = { dMaxElev = dBladeResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
end
end
Chainsaw.AddResult( Mortising)
end
elseif Proc.Topology.sName == 'Groove-3-Through' then
if Blade.Result.Bottom[1].dResidualDepth > 10 * GEO.EPS_SMALL then
-- si lavora tutto il fondo
local OptionalParameters = { dMaxElev = Blade.Result.Bottom[1].dResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
-- ancora materiale residuo - si lavorano i lati
if Chainsaw.Result.Bottom[1].dResidualDepth > 10 * GEO.EPS_SMALL then
-- si lavora solamente l'impronta lama sul fondo
if ( Blade.Result.Side[1].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength > 3 * Blade.Result.Side[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) and
( Blade.Result.Side[2].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2].dLength > 3 * Blade.Result.Side[2].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- ancora materiale residuo - si lavora da entrambi i lati
if Chainsaw.Result.Side[1].dResidualDepth > 10 * GEO.EPS_SMALL then
local OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'End', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Side[2].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- lavorando dai due lati non c'è materiale residuo - si può eliminare la lavorazione del fondo
if Chainsaw.Result.Side[2].dResidualDepth < 10 * GEO.EPS_SMALL then
Chainsaw.Result.Bottom[1].bIsApplicable = false
end
end
-- si lavora tutto il lato
else
local OptionalParameters = { dMaxElev = Blade.Result.Side[1].dResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- ancora materiale residuo - si lavora da entrambi i lati
if Chainsaw.Result.Side[1].dResidualDepth > 10 * GEO.EPS_SMALL then
Chainsaw.Result.Side[1].bIsApplicable = false
local OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Side[1].dResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Side[2].dResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- lavorando dai due lati non c'è materiale residuo - si può disabilitare la lavorazione del fondo
if Chainsaw.Result.Side[2].dResidualDepth < 10 * GEO.EPS_SMALL then
Chainsaw.Result.Bottom[1].bIsApplicable = false
end
end
end
end
end
elseif Proc.Topology.sName == 'Tunnel-4-Through' then
-- si lavora solamente l'impronta lama sul lato opposto
if ( Blade.Result.Opposite[1].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength > 3 * Blade.Result.Opposite[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) and
( Blade.Result.Opposite[2].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2].dLength > 3 * Blade.Result.Opposite[2].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Opposite[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Opposite[2].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
if Chainsaw.Result.Opposite[1].dResidualDepth > 10 * GEO.EPS_SMALL or Chainsaw.Result.Opposite[2].dResidualDepth > 10 * GEO.EPS_SMALL then
Chainsaw.Result.Opposite[1].bIsApplicable = false
Chainsaw.Result.Opposite[2].bIsApplicable = false
local OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Opposite[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'End', dLengthToMachine = Blade.Result.Opposite[1].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Opposite[2].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'End', dLengthToMachine = Blade.Result.Opposite[2].dBladeMarkLength, dMaxElev = 0}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
end
else
local OptionalParameters = { dMaxElev = Blade.Result.Opposite[1].dResidualDepth + BeamData.CUT_EXTRA}
Mortising = SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
if Chainsaw.Result.Opposite[1].dResidualDepth > 10 * GEO.EPS_SMALL then
Chainsaw.Result.Opposite[1].bIsApplicable = false
local OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Opposite[1].dResidualDepth + BeamData.CUT_EXTRA}
SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Opposite[2].dResidualDepth + BeamData.CUT_EXTRA}
SlotByChainSaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
end
end
end
-- sega a catena - aggiunta lavorazioni
local nIsApplicableCount = 0
local dFinalCompletionPercentage = 100
local bAreAllMachiningsAdded = true
for i = 1, #Chainsaw.Result.Bottom do
if Chainsaw.Result.Bottom[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded = Chainsaw.AddMachiningAllSteps( Proc, Chainsaw.Result.Bottom[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Chainsaw.Result.Bottom[i].sMessage
end
end
for i = 1, #Chainsaw.Result.Side do
if Chainsaw.Result.Side[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded = Chainsaw.AddMachiningAllSteps( Proc, Chainsaw.Result.Side[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Chainsaw.Result.Side[i].sMessage
end
end
for i = 1, #Chainsaw.Result.Opposite do
if Chainsaw.Result.Opposite[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded = Chainsaw.AddMachiningAllSteps( Proc, Chainsaw.Result.Opposite[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Chainsaw.Result.Opposite[i].sMessage
end
end
if nIsApplicableCount > 0 then
if Mortising.dCompletionPercentage > 100 - 10 * GEO.EPS_SMALL then
Strategy.Result.sStatus = 'Completed'
else
Strategy.Result.sStatus = 'Not-Completed'
-- TODO al momento si assume che la percentuale di completamento dell'ultima lavorazione sia quella rilevante
dFinalCompletionPercentage = Mortising.dCompletionPercentage
end
else
Strategy.Result.sStatus = 'Not-Applicable'
end
Strategy.Result.nCompletionIndex = FeatureLib.GetFeatureCompletionIndex( dFinalCompletionPercentage)
Strategy.Result.nQuality = FeatureLib.GetFeatureQuality( 'Chainsaw')
local MRRParametersBlade = {
dStep = TOOLS[Cutting.nToolIndex].dThickness,
dSideStep = min( TOOLS[Cutting.nToolIndex].dSideStep, Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength),
dFeed = TOOLS[Cutting.nToolIndex].Feeds.dFeed}
local MRRParametersChainsaw = {
dStep = min( TOOLS[Mortising.nToolIndex].dStep, Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength),
dSideStep = TOOLS[Mortising.nToolIndex].dThickness,
dFeed = TOOLS[Mortising.nToolIndex].Feeds.dFeed}
local dMRRBlade = MachiningLib.GetToolMRR( MRRParametersBlade)
local dMRRChainsaw = MachiningLib.GetToolMRR( MRRParametersChainsaw)
Strategy.Result.dMRR = ( dMRRBlade + dMRRChainsaw) / 2
return bAreAllMachiningsAdded, Strategy.Result
end
-------------------------------------------------------------------------------------------------------------
return STR0003
Reference in New Issue View Git Blame Copy Permalink