Egalware/databeamnew
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
5f930e2e21a54634af9bffce75c8ea896fc73281
databeamnew/Strategies/Standard/STR0003/STR0003.lua
T
andrea.villa 5f930e2e21 - Miglioramento lettura parametri strategia custom o forzati. Si fa tutto all'esecuzione della strategia 
- Si è evitata la chiamata della DeepCopy su libreria Config delle strategie
- se strategia forzata, si salva solo l'id. I parametri verranno letti dopo
2025-03-14 12:00:24 +01:00

540 lines
32 KiB
Lua
Raw Blame History

-- Strategia: STR0003
-- Descrizione
-- Lama + motosega per slot
-- Feature: tipo lapjoint
-------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------
-- TODO
-- 1 - Gestire lavorazioni da sotto
-- 2 - Inserire antischeggia (fresa o lama)
-- 3 - Smusso a V
-- 4 - Implementare lavorazione di geometrie inclinate
-------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------
-- carico librerie
local BeamLib = require( 'BeamLib')
local BeamData = require( 'BeamData')
local MachiningLib = require( 'MachiningLib')
local FeatureLib = require( 'FeatureLib')
-- strategie di base
local FaceByBlade = require( 'FACEBYBLADE')
local FaceByChainsaw = require( 'FACEBYCHAINSAW')
-- Tabella per definizione modulo
local STR0003 = {}
local Strategy = {}
local Blade = {}
local Chainsaw = {}
Blade.Result = {}
Chainsaw.Result = {}
-------------------------------------------------------------------------------------------------------------
local function IsTopologyOk( Proc)
if Proc.Topology.bAllRightAngles and
( Proc.Topology.sName == 'Pocket-5-Blind' or
Proc.Topology.sName == 'Groove-3-Through' or
Proc.Topology.sName == 'Groove-4-Blind' or
Proc.Topology.sName == 'Tunnel-4-Through') then
return true
else
return false
end
end
local function GetCompletionPercentage( Proc, Result)
local dNotMachinedArea = 0
local dCompletionPercentage = 0
if Proc.Topology.sFamily == 'Tunnel' then
dNotMachinedArea = Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
if #Result == 2 then
dNotMachinedArea = dNotMachinedArea - Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[2].dDepthMachined)
end
else
if #Result == 1 then
dNotMachinedArea = Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
elseif #Result == 2 then
dNotMachinedArea = ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength - Result[2].dDepthMachined) * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
elseif #Result == 3 then
dNotMachinedArea = ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength - Result[2].dDepthMachined - Result[3].dDepthMachined) * ( Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength - Result[1].dDepthMachined)
end
end
dCompletionPercentage = 100 - dNotMachinedArea / Proc.MainFaces.LongFaces[1].dArea * 100
return dCompletionPercentage
end
-- TODO si può unificare con eguale funzione in STR0004
local function SortMachiningsBySegment( MachiningA, MachiningB)
if MachiningA.nFeatureSegment > MachiningB.nFeatureSegment then
return false
elseif MachiningB.nFeatureSegment > MachiningA.nFeatureSegment then
return true
else
if TOOLS[ MachiningA.nToolIndex].sFamily == 'SAWBLADE' and TOOLS[ MachiningB.nToolIndex].sFamily == 'MORTISE' then
return true
elseif TOOLS[ MachiningA.nToolIndex].sFamily == 'MORTISE' and TOOLS[ MachiningB.nToolIndex].sFamily == 'SAWBLADE' then
return false
else
if MachiningA.sEdgeType == 'Side' and MachiningB.sEdgeType ~= 'Side' then
return true
elseif MachiningB.sEdgeType == 'Side' and MachiningA.sEdgeType ~= 'Side' then
return false
end
end
end
end
local function SortMachiningsByTool( MachiningA, MachiningB)
if TOOLS[ MachiningA.nToolIndex].sFamily == 'SAWBLADE' and TOOLS[ MachiningB.nToolIndex].sFamily == 'MORTISE' then
return true
elseif TOOLS[ MachiningA.nToolIndex].sFamily == 'MORTISE' and TOOLS[ MachiningB.nToolIndex].sFamily == 'SAWBLADE' then
return false
else
if MachiningA.nFeatureSegment > MachiningB.nFeatureSegment then
return false
elseif MachiningB.nFeatureSegment > MachiningA.nFeatureSegment then
return true
else
if MachiningA.sEdgeType == 'Side' and MachiningB.sEdgeType ~= 'Side' then
return true
elseif MachiningB.sEdgeType == 'Side' and MachiningA.sEdgeType ~= 'Side' then
return false
end
end
end
end
local function MergeResults( Result)
local SortedResult = {}
for i = 1, #Result.Side do
if Result.Side[i].bIsApplicable then
table.insert( SortedResult, Result.Side[i])
end
end
for i = 1, #Result.Bottom do
if Result.Bottom[i].bIsApplicable then
table.insert( SortedResult, Result.Bottom[i])
end
end
for i = 1, #Result.Opposite do
if Result.Opposite[i].bIsApplicable then
table.insert( SortedResult, Result.Opposite[i])
end
end
return SortedResult
end
local function AddResult( Machining, Result)
table.insert( Result, {})
if not Result.Bottom then
Result.Bottom = {}
end
if not Result.Side then
Result.Side = {}
end
if not Result.Opposite then
Result.Opposite = {}
end
if Machining.sEdgeType == 'Bottom' then
table.insert( Result.Bottom, Machining)
elseif Machining.sEdgeType == 'Side' then
table.insert( Result.Side, Machining)
elseif Machining.sEdgeType == 'Opposite' then
table.insert( Result.Opposite, Machining)
else
error('AddResult : unknown edge type')
end
return Result
end
local function AddMachinings( Proc, Machinings, bAddMachining)
local nIsApplicableCount = 0
local bAreAllMachiningsAdded = true
for i = 1, #Machinings do
if Machinings[i].bIsApplicable then
nIsApplicableCount = nIsApplicableCount + 1
if bAddMachining then
local bIsMachiningAdded
bIsMachiningAdded = MachiningLib.AddMachinings( Proc, Machinings[i])
if not bIsMachiningAdded then
bAreAllMachiningsAdded = false
end
end
Strategy.Result.sInfo = Strategy.Result.sInfo .. '\n' .. Machinings[i].sMessage
end
end
return bAreAllMachiningsAdded, nIsApplicableCount
end
function Blade.AddResult( Cutting)
AddResult( Cutting, Blade.Result)
end
function Chainsaw.AddResult( Mortising)
AddResult( Mortising, Chainsaw.Result)
end
function STR0003.Make( bAddMachining, Proc, Part, CustomParameters)
-- carico parametri da default e li aggiorno con quelli passati dal chiamante (potrebbero non essere congruenti)
local StrategyLib = {}
StrategyLib.Config = require( 'STR0003\\STR0003Config')
Strategy.sName = StrategyLib.Config.sStrategyId
Strategy.Parameters = BeamLib.LoadCustomParametersInStrategy( Proc, CustomParameters, StrategyLib.Config)
Strategy.Result = {}
Strategy.Result.sInfo = ''
Blade.Result = {}
Chainsaw.Result = {}
if not IsTopologyOk( Proc) then
local sErr = 'Feature '.. Proc.idFeature .. ' : strategy ' .. Strategy.sName .. ' not implemented'
EgtOutLog( sErr)
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Result.sInfo = 'Topology'
return false, Strategy.Result
end
-- se tasca su faccia sotto la strategia non è applicabile (la sega a catena in generale non può lavorare da sotto)
-- TODO se OnlySaw questo test è da rimuovere ma bisogna considerare anche la lama da sotto
if Proc.AffectedFaces.bBottom and ( Proc.nFct > 3 or not Proc.AffectedFaces.bTop) then
local sErr = 'Feature '.. Proc.idFeature .. ' : strategy ' .. Strategy.sName .. ' not applicable - pocket on bottom face'
EgtOutLog( sErr)
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Result.sInfo = 'Direction'
return false, Strategy.Result
end
local dExtendAfterTail = Strategy.Parameters.dExtendAfterTail or max( Part.dDistanceToNextPiece - BeamData.CUT_EXTRA, 0)
if MachiningLib.CanExtendAfterTail( Strategy.Parameters.sCanDamageNextPiece, Part) then
dExtendAfterTail = 10000
end
-- eventuali punti di spezzatura
local FeatureSplittingPoints = FeatureLib.GetFeatureSplittingPoints( Proc, Part)
local bIsSplitFeature = false
if #FeatureSplittingPoints > 0 then
bIsSplitFeature = true
end
-- altezza tasca
local dPocketHeight = 0
if Proc.Topology.sFamily == 'Tunnel' then
dPocketHeight = Proc.MainFaces.SideFaces[1].MainEdges.OppositeEdges[1].dLength
else
dPocketHeight = Proc.MainFaces.BottomFaces[1].MainEdges.SideEdges[1].dLength
end
-- lama - calcolo lavorazioni
local Cutting = {}
local OptionalParameters = { bForceLongcutBlade = Strategy.Parameters.bForceLongcutBlade,
dExtendAfterTail = dExtendAfterTail,
dPocketHeight = dPocketHeight,
bIsSplitFeature = bIsSplitFeature,
dMinNzDownUp = 0}
if Proc.Topology.sFamily == 'Tunnel' then
OptionalParameters.bOppositeToolDirection = true
Cutting = FaceByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
else
Cutting = FaceByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
end
Blade.AddResult( Cutting)
-- lato opposto del tunnel
if Proc.Topology.sFamily == 'Tunnel' then
OptionalParameters.bOppositeToolDirection = true
Cutting = FaceByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Blade.AddResult( Cutting)
else
-- se la lama non è arrivata sul fondo e c'è almeno un lato aperto va lavorato
if Blade.Result.Bottom[1].dResidualDepth > 10 * GEO.EPS_SMALL then
-- eventuale lavorazione di lama - lato della tasca da cui inizia la lavorazione
if Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen then
OptionalParameters.bOppositeToolDirection = true
Cutting = FaceByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Blade.AddResult( Cutting)
end
-- eventuale lavorazione di lama - lato della tasca in cui finisce la lavorazione
if Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen then
OptionalParameters.bOppositeToolDirection = true
Cutting = FaceByBlade.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
Blade.AddResult( Cutting)
end
-- la lama è arrivata sul fondo e tasca passante, non servono ulteriori lavorazioni
elseif #( Proc.MainFaces.SideFaces) == 0 then
Strategy.Parameters.bFinishWithChainSaw = false
Strategy.Parameters.bNotCompleteWithBladeRadius = false
end
end
-- lama - lavorazioni raggruppate in unica lista
Blade.Result.Sorted = MergeResults( Blade.Result)
-- lama - aggiunta eventuali lavorazioni splittate
if bIsSplitFeature then
Blade.Result.Sorted = MachiningLib.GetSplitMachinings( Blade.Result.Sorted, FeatureSplittingPoints, Part)
end
-- lama - nessuna lavorazione successiva - aggiunta lavorazioni e calcolo risultati
-- TODO bisogna uscire se la lama non può fare alcuna lavorazione; non ha senso che STR0003 lama+catena sia scelta se la lama non può lavorare, in quel caso deve essere scelta la STR0004 solo catena
if not Strategy.Parameters.bFinishWithChainSaw then
-- ordinamento
if Strategy.Parameters.bSortBySegment then
table.sort( Blade.Result.Sorted, SortMachiningsBySegment)
else
table.sort( Blade.Result.Sorted, SortMachiningsByTool)
end
-- aggiunta lavorazioni
local nIsApplicableCount = 0
local bAreAllMachiningsAdded = true
local dFinalCompletionPercentage = 100
bAreAllMachiningsAdded, nIsApplicableCount = AddMachinings( Proc, Blade.Result.Sorted, bAddMachining)
if nIsApplicableCount > 0 then
-- TODO sistemare il calcolo completamento - implementare calcolo area lavorata
if not Strategy.Parameters.bNotCompleteWithBladeRadius and Cutting.dCompletionPercentage > 100 - 10 * GEO.EPS_SMALL then
Strategy.Result.sStatus = 'Completed'
else
Strategy.Result.sStatus = 'Not-Completed'
-- TODO al momento si assume che la percentuale di completamento dell'ultima lavorazione sia quella rilevante
dFinalCompletionPercentage = Cutting.dCompletionPercentage
end
else
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Parameters.bFinishWithChainSaw = false
end
Strategy.Result.nCompletionIndex = FeatureLib.GetFeatureCompletionIndex( dFinalCompletionPercentage)
Strategy.Result.nQuality = FeatureLib.GetFeatureQuality( 'Blade')
local MRRParametersBlade = {
dStep = TOOLS[Cutting.nToolIndex].dThickness,
dSideStep = min( TOOLS[Cutting.nToolIndex].dSideStep, Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength),
dFeed = TOOLS[Cutting.nToolIndex].Feeds.dFeed}
local dMRRBlade = MachiningLib.GetToolMRR( MRRParametersBlade)
Strategy.Result.dMRR = dMRRBlade
return bAreAllMachiningsAdded, Strategy.Result
end
-- sega a catena - calcolo lavorazioni
-- TODO riordinare le righe troppo lunghe
local Mortising = {}
OptionalParameters = {}
if Proc.Topology.sName == 'Groove-4-Blind' or Proc.Topology.sName == 'Pocket-5-Blind' then
-- si lavora solamente l'impronta lama sui lati chiusi
if ( Blade.Result.Bottom[1].dResidualDepth < 10 * GEO.EPS_SMALL) and
( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.dLength > 3 * Blade.Result.Bottom[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
if not Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen then
local OptionalParameters = { sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Bottom[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
end
if not Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen then
local OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Bottom[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
end
-- si lavora tutto il fondo
else
local OptionalParameters = { dMaxElev = Blade.Result.Bottom[1].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
end
-- ancora materiale residuo - se possibile si lavora dal lato
if Chainsaw.Result.Bottom[#Chainsaw.Result.Bottom].dResidualDepth > 10 * GEO.EPS_SMALL and #Proc.MainFaces.SideFaces == 1 then
-- si lavora solamente l'impronta lama sul fondo
if ( #Blade.Result.Side > 0) and Blade.Result.Side[1].dResidualDepth < 10 * GEO.EPS_SMALL then
if ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength > 3 * Blade.Result.Side[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
elseif ( Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2].dLength > 3 * Blade.Result.Side[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
end
-- si lavora tutto il lato
else
local dBladeResidualDepth
if #Blade.Result.Side > 0 then
dBladeResidualDepth = Blade.Result.Side[1].dResidualDepth
else
dBladeResidualDepth = Blade.Result.Bottom[1].dResidualDepth
end
if Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsStartOpen then
local OptionalParameters = { dMaxElev = dBladeResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
elseif Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge.bIsEndOpen then
local OptionalParameters = { dMaxElev = dBladeResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
end
end
Chainsaw.AddResult( Mortising)
end
elseif Proc.Topology.sName == 'Groove-3-Through' then
if Blade.Result.Bottom[1].dResidualDepth > 10 * GEO.EPS_SMALL then
-- si lavora tutto il fondo
local OptionalParameters = { dMaxElev = Blade.Result.Bottom[1].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.BottomEdge, OptionalParameters)
Chainsaw.AddResult( Mortising)
-- ancora materiale residuo - si lavorano i lati
if Chainsaw.Result.Bottom[1].dResidualDepth > 10 * GEO.EPS_SMALL then
-- si lavora solamente l'impronta lama sul fondo
if ( Blade.Result.Side[1].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength > 3 * Blade.Result.Side[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) and
( Blade.Result.Side[2].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2].dLength > 3 * Blade.Result.Side[2].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- ancora materiale residuo - si lavora da entrambi i lati
if Chainsaw.Result.Side[1].dResidualDepth > 10 * GEO.EPS_SMALL then
local OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'End', dLengthToMachine = Blade.Result.Side[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Side[2].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- lavorando dai due lati non c'è materiale residuo - si può eliminare la lavorazione del fondo
if Chainsaw.Result.Side[2].dResidualDepth < 10 * GEO.EPS_SMALL then
Chainsaw.Result.Bottom[1].bIsApplicable = false
end
end
-- si lavora tutto il lato
else
local OptionalParameters = { dMaxElev = Blade.Result.Side[1].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- ancora materiale residuo - si lavora da entrambi i lati
if Chainsaw.Result.Side[1].dResidualDepth > 10 * GEO.EPS_SMALL then
Chainsaw.Result.Side[1].bIsApplicable = false
local OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Side[1].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Side[2].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
-- lavorando dai due lati non c'è materiale residuo - si può disabilitare la lavorazione del fondo
if Chainsaw.Result.Side[2].dResidualDepth < 10 * GEO.EPS_SMALL then
Chainsaw.Result.Bottom[1].bIsApplicable = false
end
end
end
end
end
elseif Proc.Topology.sName == 'Tunnel-4-Through' then
-- si lavora solamente l'impronta lama sul lato opposto
if ( Blade.Result.Opposite[1].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength > 3 * Blade.Result.Opposite[1].dBladeMarkLength - 10 * GEO.EPS_SMALL) and
( Blade.Result.Opposite[2].dResidualDepth < 10 * GEO.EPS_SMALL and Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2].dLength > 3 * Blade.Result.Opposite[2].dBladeMarkLength - 10 * GEO.EPS_SMALL) then
local OptionalParameters = { sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Opposite[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { sSideToMachine = 'End', dLengthToMachine = Blade.Result.Opposite[2].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
if Chainsaw.Result.Opposite[1].dResidualDepth > 10 * GEO.EPS_SMALL or Chainsaw.Result.Opposite[2].dResidualDepth > 10 * GEO.EPS_SMALL then
Chainsaw.Result.Opposite[1].bIsApplicable = false
Chainsaw.Result.Opposite[2].bIsApplicable = false
local OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Opposite[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'End', dLengthToMachine = Blade.Result.Opposite[1].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'Start', dLengthToMachine = Blade.Result.Opposite[2].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, sSideToMachine = 'End', dLengthToMachine = Blade.Result.Opposite[2].dBladeMarkLength, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
end
else
local OptionalParameters = { dMaxElev = Blade.Result.Opposite[1].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
if Chainsaw.Result.Opposite[1].dResidualDepth > 10 * GEO.EPS_SMALL then
Chainsaw.Result.Opposite[1].bIsApplicable = false
local OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Opposite[1].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1], OptionalParameters)
Chainsaw.AddResult( Mortising)
OptionalParameters = {}
OptionalParameters = { bStopAtHalfElevation = true, dMaxElev = Blade.Result.Opposite[2].dResidualDepth + BeamData.CUT_EXTRA, dExtendAfterTail = dExtendAfterTail, dPocketHeight = dPocketHeight, bOppositeToolDirection = true, bIsSplitFeature = bIsSplitFeature}
Mortising = FaceByChainsaw.Make( Proc, Part, Proc.MainFaces.LongFaces[1], Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[2], OptionalParameters)
Chainsaw.AddResult( Mortising)
end
end
end
-- sega a catena - lavorazioni raggruppate in unica lista
Chainsaw.Result.Sorted = MergeResults( Chainsaw.Result)
-- sega a catena - aggiunta eventuali lavorazioni splittate
if bIsSplitFeature then
Chainsaw.Result.Sorted = MachiningLib.GetSplitMachinings( Chainsaw.Result.Sorted, FeatureSplittingPoints, Part)
end
-- tutte le lavorazioni di tutti gli utensili in unica lista
local Result = {}
for i = 1, #Blade.Result.Sorted do
table.insert( Result, Blade.Result.Sorted[i])
end
for i = 1, #Chainsaw.Result.Sorted do
table.insert( Result, Chainsaw.Result.Sorted[i])
end
-- ordinamento
if Strategy.Parameters.bSortBySegment then
table.sort( Result, SortMachiningsBySegment)
else
table.sort( Result, SortMachiningsByTool)
end
-- aggiunta lavorazioni per tutti gli utensili
local nIsApplicableCount = 0
local bAreAllMachiningsAdded = true
local dFinalCompletionPercentage = 100
bAreAllMachiningsAdded, nIsApplicableCount = AddMachinings( Proc, Result, bAddMachining)
if nIsApplicableCount > 0 then
if Mortising.dCompletionPercentage > 100 - 10 * GEO.EPS_SMALL then
Strategy.Result.sStatus = 'Completed'
else
Strategy.Result.sStatus = 'Not-Completed'
-- TODO al momento si assume che la percentuale di completamento dell'ultima lavorazione sia quella rilevante
dFinalCompletionPercentage = Mortising.dCompletionPercentage
end
else
Strategy.Result.sStatus = 'Not-Applicable'
end
-- calcolo risultati
Strategy.Result.nCompletionIndex = FeatureLib.GetFeatureCompletionIndex( dFinalCompletionPercentage)
Strategy.Result.nQuality = FeatureLib.GetFeatureQuality( 'Chainsaw')
local MRRParametersBlade = {
dStep = TOOLS[Cutting.nToolIndex].dThickness,
dSideStep = min( TOOLS[Cutting.nToolIndex].dSideStep, Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength),
dFeed = TOOLS[Cutting.nToolIndex].Feeds.dFeed}
local MRRParametersChainsaw = {
dStep = min( TOOLS[Mortising.nToolIndex].dStep, Proc.MainFaces.LongFaces[1].MainEdges.SideEdges[1].dLength),
dSideStep = TOOLS[Mortising.nToolIndex].dThickness,
dFeed = TOOLS[Mortising.nToolIndex].Feeds.dFeed}
local dMRRBlade = MachiningLib.GetToolMRR( MRRParametersBlade)
local dMRRChainsaw = MachiningLib.GetToolMRR( MRRParametersChainsaw)
Strategy.Result.dMRR = ( dMRRBlade + dMRRChainsaw) / 2
return bAreAllMachiningsAdded, Strategy.Result
end
-------------------------------------------------------------------------------------------------------------
return STR0003
Reference in New Issue View Git Blame Copy Permalink