Egalware/databeamnew
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
285f3bc78daf3cef9f3ac77bf4417a2dddf7d04e
databeamnew/Strategies/STR0002/STR0002.lua
T
andrea.villa 285f3bc78d - Calcolo automatiso SIDESTEP portato a 1/3 del diametro 
- Migliorato calcolo percentuale lavorata
- Gestione topologia Rabbet-2-Through
- Varie migliorie calcoli svuotature da applicare
2024-06-05 10:36:06 +02:00

480 lines
24 KiB
Lua
Raw Blame History

-- Strategia: STR0002
-- Descrizione
-- Svuotatura tasca
-- Feature tipo LapJpint
-------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------
-- TODO
-- 1 - Controllare lavorazioni in caso di feature lunga spezzata
-- 2 - Inserire antischeggia (fresa o lama)
-- 3 - Modalità svuotatura con fresa grande e spigoli con fresa piccola
-- 4 - Smusso a V
-- 5 - Finitura con motosega (se la fresa non completa)
-------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------
-- carico librerie
local BeamLib = require( 'BeamLib')
local BeamData = require( 'BeamData')
local MachiningLib = require( 'MachiningLib')
local FeatureData = require( 'FeatureData')
-- Tabella per definizione modulo
local STR0002 = {}
local Strategy = {}
-------------------------------------------------------------------------------------------------------------
local function IsTopologyOk( Proc)
if Proc.Topology.sName == 'Pocket-5-Blind' or
Proc.Topology.sName == 'Groove-4-Blind' or
Proc.Topology.sName == 'Groove-3-Through' or
Proc.Topology.sName == 'Groove-3-Blind' or
Proc.Topology.sName == 'Rabbet-2-Through' then
return true
else
return false
end
end
-------------------------------------------------------------------------------------------------------------
local function CalcMachinedPercentage( Proc, Machining)
-- se non ci sono lavorazioni esco subito
if Machining.sTypeMachining == 'None' then
return 0
end
local dPercentage = 0
if Machining[1].bIsApplicable then
dPercentage = ( Machining[1].dElevation - Machining[1].ToolInfo.dResidualDepth) / Machining[1].dElevation
end
if Machining[2].bIsApplicable then
local dAbsPercentage = ( Machining[2].dElevation - Machining[2].ToolInfo.dResidualDepth) / Machining[2].dElevation
dPercentage = dPercentage + ( 1 - dPercentage) * dAbsPercentage
end
if Machining[3].bIsApplicable then
local dAbsPercentage = ( Machining[3].dElevation - Machining[3].ToolInfo.dResidualDepth) / Machining[3].dElevation
dPercentage = dPercentage + ( 1 - dPercentage) * dAbsPercentage
end
if Machining[4].bIsApplicable then
local dAbsPercentage = ( Machining[4].dElevation - Machining[4].ToolInfo.dResidualDepth) / Machining[4].dElevation
dPercentage = dPercentage + ( 1 - dPercentage) * dAbsPercentage
end
return dPercentage * 100
end
-------------------------------------------------------------------------------------------------------------
local function GetBestPocketingStrategy( Proc)
-- imposto paraemtri di ricerca utensile in base a topologia
local Machining = {}
local Milling = {}
local ToolSearchParameters = {}
ToolSearchParameters.sMillShape = 'STANDARD'
Machining.sTypeMachining = 'None' -- Bottom-Side1-Side2\ Bottom-Side1\ Bottom-Side2\ Side1-Side2\ Bottom\ Side1 \ Side2 \ None
Strategy.Result.nQuality = FeatureData.GetFeatureQuality( 'Mill')
-- caso speciale Tunnel che non ha faccia bottom
if Proc.Topology.sName == 'Tunnel-4-Through' then
local dFaceHeight = Proc.MainFaces.SideFaces[1].MainEdges.OppositeEdges[1].dLength
local dFaceWidth = Proc.MainFaces.LongFaces[1].MainEdges.OppositeEdges[1].dLength
ToolSearchParameters.sType = 'MILL_STD'
ToolSearchParameters.dMaxToolDiameter = min( Strategy.Parameters.dMaxCornerRadius * 2, dFaceHeight, dFaceWidth)
-- imposto dati per cercare la fresa migliore
elseif Proc.Topology.sName == 'Pocket-5-Blind' then
local dFaceWidth = Proc.MainFaces.BottomFace.MainEdges.LongEdges[1].dLength
local dFaceHeight = Proc.MainFaces.BottomFace.MainEdges.SideEdges[1].dLength
ToolSearchParameters.sType = 'MILL_STD'
ToolSearchParameters.dMaxToolDiameter = min( Strategy.Parameters.dMaxCornerRadius * 2, dFaceHeight, dFaceWidth)
-- cerco fresa che può anche non lavorare di testa
elseif Proc.Topology.sName == 'Groove-4-Blind' then
local dFaceWidth = Proc.MainFaces.BottomFace.MainEdges.LongEdges[1].dLength
ToolSearchParameters.sType = 'MILL_NOTIP'
ToolSearchParameters.dMaxToolDiameter = min( Strategy.Parameters.dMaxCornerRadius * 2, dFaceWidth)
elseif Proc.Topology.sName == 'Groove-3-Through' then
local dFaceWidth = Proc.MainFaces.BottomFace.MainEdges.SideEdges[1].dLength
ToolSearchParameters.sType = 'MILL_NOTIP'
ToolSearchParameters.dMaxToolDiameter = dFaceWidth
elseif Proc.Topology.sName == 'Groove-3-Blind' then
ToolSearchParameters.sType = 'MILL_NOTIP'
ToolSearchParameters.dMaxToolDiameter = Strategy.Parameters.dMaxCornerRadius * 2
elseif Proc.Topology.sName == 'Rabbet-2-Through' then
ToolSearchParameters.sType = 'MILL_NOTIP'
ToolSearchParameters.dMaxToolDiameter = 9999
else
return nil
end
-- ===== RICERCA UTENSILE =====
-- cerco utensile per lavorare faccia Bottom
Milling.bIsApplicable = false
if Proc.Topology.sName ~= 'Tunnel-4-Through' then
ToolSearchParameters.dElevation = Proc.MainFaces.BottomFace.dElevation
ToolSearchParameters.vtToolDirection = Proc.MainFaces.BottomFace.vtN
Milling.idFaceToMachine = Proc.MainFaces.BottomFace.id
Milling.idProc = Proc.id
Milling.vtFaceNormal = Proc.MainFaces.BottomFace.vtN
Milling.dElevation = Proc.MainFaces.BottomFace.dElevation
Milling.ToolInfo = {}
Milling.ToolInfo = MachiningLib.FindMill( Proc, ToolSearchParameters)
if Milling.ToolInfo.nToolIndex then
Milling.bIsApplicable = true
local ParametersMRR = {}
ParametersMRR.nToolIndex = Milling.ToolInfo.nToolIndex
Milling.dMRR = MachiningLib.GetToolMRR( ParametersMRR)
end
end
table.insert( Machining, Milling)
-- caso speciale 'Rabbet-2-Through' seconda faccia principale
Milling = {}
Milling.bIsApplicable = false
if Proc.Topology.sName == 'Rabbet-2-Through' then
ToolSearchParameters.dElevation = Proc.MainFaces.LongFaces[1].dElevation
ToolSearchParameters.vtToolDirection = Proc.MainFaces.LongFaces[1].vtN
Milling.vtFaceNormal = Proc.MainFaces.LongFaces[1].vtN
Milling.idFaceToMachine = Proc.MainFaces.LongFaces[1].id
Milling.idProc = Proc.id
Milling.dElevation = Proc.MainFaces.LongFaces[1].dElevation
Milling.ToolInfo = {}
Milling.ToolInfo = MachiningLib.FindMill( Proc, ToolSearchParameters)
if Milling.ToolInfo.nToolIndex then
Milling.bIsApplicable = true
local ParametersMRR = {}
ParametersMRR.nToolIndex = Milling.ToolInfo.nToolIndex
Milling.dMRR = MachiningLib.GetToolMRR( ParametersMRR)
end
end
table.insert( Machining, Milling)
-- cerco utensile per lavorare di fianco 1
Milling = {}
Milling.bIsApplicable = false
if Proc.Topology.sName ~= 'Pocket-5-Blind' then
if Proc.Topology.sName == 'Groove-4-Blind' or Proc.Topology.sName == 'Groove-3-Blind' then
ToolSearchParameters.dElevation = Proc.MainFaces.LongFaces[1].dElevation
ToolSearchParameters.vtToolDirection = Proc.MainFaces.LongFaces[1].vtN
Milling.vtFaceNormal = Proc.MainFaces.LongFaces[1].vtN
Milling.idFaceToMachine = Proc.MainFaces.LongFaces[1].id
Milling.idProc = Proc.id
Milling.dElevation = Proc.MainFaces.LongFaces[1].dElevation
else -- 'Tunnel-4-Through', 'Groove-3-Through', 'Rabbet-2-Through'
ToolSearchParameters.dElevation = ( Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation * 2) + BeamData.MILL_OVERLAP
ToolSearchParameters.vtToolDirection = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].vtN
Milling.vtFaceNormal = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].vtN
Milling.idFaceToMachine = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].id
Milling.idProc = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.id
Milling.dElevation = ( Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation * 2) + BeamData.MILL_OVERLAP
end
Milling.ToolInfo = {}
Milling.ToolInfo = MachiningLib.FindMill( Proc, ToolSearchParameters)
if Milling.ToolInfo.nToolIndex then
Milling.bIsApplicable = true
local ParametersMRR = {}
ParametersMRR.nToolIndex = Milling.ToolInfo.nToolIndex
Milling.dMRR = MachiningLib.GetToolMRR( ParametersMRR)
end
end
table.insert( Machining, Milling)
-- cerco utensile per lavorare di fianco 2
Milling = {}
Milling.bIsApplicable = false
if Proc.Topology.sName ~= 'Pocket-5-Blind' and Proc.Topology.sName ~= 'Groove-4-Blind' then
if Proc.Topology.sName == 'Tunnel-4-Through' or Proc.Topology.sName == 'Groove-3-Through' or Proc.Topology.sName == 'Rabbet-2-Through' then
ToolSearchParameters.dElevation = ( Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation * 2) + BeamData.MILL_OVERLAP
ToolSearchParameters.vtToolDirection = -Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].vtN
Milling.vtFaceNormal = -Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].vtN
Milling.idFaceToMachine = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].id
Milling.idProc = Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.id
Milling.dElevation = ( Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation * 2) + BeamData.MILL_OVERLAP
Milling.bInvertTool = true
else -- 'Groove-3-Blind'
ToolSearchParameters.dElevation = Proc.MainFaces.SideFaces[1].dElevation
ToolSearchParameters.vtToolDirection = Proc.MainFaces.SideFaces[1].vtN
Milling.vtFaceNormal = Proc.MainFaces.SideFaces[1].vtN
Milling.idFaceToMachine = Proc.MainFaces.SideFaces[1].id
Milling.idProc = Proc.id
Milling.dElevation = Proc.MainFaces.SideFaces[1].dElevation
end
Milling.ToolInfo = {}
Milling.ToolInfo = MachiningLib.FindMill( Proc, ToolSearchParameters)
if Milling.ToolInfo.nToolIndex then
Milling.bIsApplicable = true
local ParametersMRR = {}
ParametersMRR.nToolIndex = Milling.ToolInfo.nToolIndex
Milling.dMRR = MachiningLib.GetToolMRR( ParametersMRR)
end
end
table.insert( Machining, Milling)
-- ===== SCELTA LAVORAZIONI =====
-- se bottom completa tutto
if Machining[1].bIsApplicable and Machining[1].ToolInfo.dResidualDepth < 10 * GEO.EPS_SMALL then
Machining.sTypeMachining = 'Bottom'
Strategy.Result.sStatus = 'Completed'
Strategy.Result.nCompletionIndex = FeatureData.GetFeatureCompletionIndex( 100)
Strategy.Result.dMRR = Machining[1].dMRR
Machining[1].ToolInfo.dResidualDepth = 0
Machining[2].bIsApplicable = false
Machining[3].bIsApplicable = false
Machining[4].bIsApplicable = false
return Machining
-- caso speciale 'Rabbet-2-Through' che ha la sweconda faccia come se fosse una seconda bottom
elseif Proc.Topology.sName == 'Rabbet-2-Through' and Machining[2].bIsApplicable and Machining[2].ToolInfo.dResidualDepth < 10 * GEO.EPS_SMALL then
Machining.sTypeMachining = 'Bottom2'
Strategy.Result.sStatus = 'Completed'
Strategy.Result.nCompletionIndex = FeatureData.GetFeatureCompletionIndex( 100)
Strategy.Result.dMRR = Machining[2].dMRR
Machining[2].ToolInfo.dResidualDepth = 0
Machining[1].bIsApplicable = false
Machining[3].bIsApplicable = false
Machining[4].bIsApplicable = false
return Machining
-- se la 3 completa tutto
elseif Machining[3].bIsApplicable and Machining[3].ToolInfo.dResidualDepth < 10 * GEO.EPS_SMALL then
Machining.sTypeMachining = 'Side1'
Strategy.Result.sStatus = 'Completed'
Strategy.Result.nCompletionIndex = FeatureData.GetFeatureCompletionIndex( 100)
Strategy.Result.dMRR = Machining[3].dMRR
if Proc.MainFaces.TunnelAddedFaces then
Machining[3].ToolInfo.dResidualDepth = -( Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation + BeamData.MILL_OVERLAP)
else
Machining[3].ToolInfo.dResidualDepth = 0
end
Machining[1].bIsApplicable = false
Machining[2].bIsApplicable = false
Machining[4].bIsApplicable = false
return Machining
-- se la 4 completa tutto
elseif Machining[4].bIsApplicable and Machining[4].ToolInfo.dResidualDepth < 10 * GEO.EPS_SMALL then
Machining.sTypeMachining = 'Side2'
Strategy.Result.sStatus = 'Completed'
Strategy.Result.nCompletionIndex = FeatureData.GetFeatureCompletionIndex( 100)
Strategy.Result.dMRR = Machining[4].dMRR
if Proc.MainFaces.TunnelAddedFaces then
Machining[4].ToolInfo.dResidualDepth = -( Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation + BeamData.MILL_OVERLAP)
else
Machining[4].ToolInfo.dResidualDepth = 0
end
Machining[1].bIsApplicable = false
Machining[2].bIsApplicable = false
Machining[3].bIsApplicable = false
return Machining
-- se tunnel 2+3 completa tutto
elseif Proc.MainFaces.TunnelAddedFaces and Machining[2].bIsApplicable and Machining[3].bIsApplicable and
Machining[3].ToolInfo.dResidualDepth + Machining[4].ToolInfo.dResidualDepth < (Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation * 2) + BeamData.MILL_OVERLAP then
Machining.sTypeMachining = 'Side1-Side2'
Strategy.Result.sStatus = 'Completed'
Machining[3].ToolInfo.dResidualDepth = Machining[3].ToolInfo.dResidualDepth - Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation
Machining[4].ToolInfo.dResidualDepth = -Machining[3].ToolInfo.dResidualDepth + BeamData.MILL_OVERLAP
Strategy.Result.nCompletionIndex = FeatureData.GetFeatureCompletionIndex( 100)
Strategy.Result.dMRR = ( Machining[3].dMRR + Machining[4].dMRR) / 2
Machining[1].bIsApplicable = false
Machining[2].bIsApplicable = false
return Machining
end
Strategy.Result.sStatus = 'Not-Completed'
if Machining[1].bIsApplicable then
Machining.sTypeMachining = 'Bottom'
Strategy.Result.dMRR = Machining[1].dMRR
end
if Machining[2].bIsApplicable then
Machining.sTypeMachining = EgtIf( Machining.sTypeMachining == 'None', 'Bottom2', Machining.sTypeMachining .. '-Bottom2')
Strategy.Result.dMRR = Machining[1].dMRR
end
if Machining[3].bIsApplicable then
if Proc.MainFaces.TunnelAddedFaces then
Machining[3].ToolInfo.dResidualDepth = Machining[3].ToolInfo.dResidualDepth - Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation
end
Machining.sTypeMachining = EgtIf( Machining.sTypeMachining == 'None', 'Side1', Machining.sTypeMachining .. '-Side1')
Strategy.Result.dMRR = Machining[1].dMRR
end
if Machining[4].bIsApplicable then
if Proc.MainFaces.TunnelAddedFaces then
Machining[4].ToolInfo.dResidualDepth = Machining[4].ToolInfo.dResidualDepth - Proc.MainFaces.TunnelAddedFaces.MiddleFaceTm.Faces[1].dElevation
end
Machining.sTypeMachining = EgtIf( Machining.sTypeMachining == 'None', 'Side2', Machining.sTypeMachining .. '-Side2')
Strategy.Result.dMRR = Machining[1].dMRR
end
local dMachinedPrercentage = CalcMachinedPercentage( Proc, Machining)
Strategy.Result.nCompletionIndex = FeatureData.GetFeatureCompletionIndex( dMachinedPrercentage)
Strategy.Result.sInfo = 'Machining not complete, left ' .. tostring( 100-dMachinedPrercentage) .. '%'
-- se non ho trovato neanche una lavorazione
if Machining.sTypeMachining == 'None' then
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Result.nCompletionIndex = 0
Strategy.Result.dMRR = 0
Strategy.Result.nQuality = 0
Strategy.Result.sInfo = 'Mill not found'
end
return Machining
end
-------------------------------------------------------------------------------------------------------------
function STR0002.Make( bAddMachining, Proc, Part, CustomParameters)
-- carico parametri de default e li aggiorno con quelli passati dal chiamante (potrebbero non essere congruenti)
local StrategyLib = {}
StrategyLib.Config = require( 'STR0002\\STR0002Config')
Strategy.sName = StrategyLib.Config.sStrategyId
CustomParameters = BeamLib.GetUpdateCustomParameters( CustomParameters, StrategyLib.Config.Parameters)
Strategy.Parameters = BeamLib.LoadCustomParametersInStrategy( CustomParameters)
Strategy.Machining = {}
Strategy.Result = {}
if not IsTopologyOk( Proc) then
local sErr = 'Feature '.. Proc.idFeature .. ' : strategy ' .. Strategy.Config.sStrategyId .. ' not implemented'
EgtOutLog( sErr)
Strategy.Result.sStatus = 'Not-Applicable'
Strategy.Result.nCompletionIndex = 0
Strategy.Result.dMRR = 0
Strategy.Result.nQuality = 0
Strategy.Result.sInfo = sErr
return false, Strategy.Result
end
local bApplyMachiningOK = true
local ToolInfo = {}
local Pocketing = {}
Pocketing.Steps = {}
Pocketing.LeadIn = {}
Strategy.Machining = GetBestPocketingStrategy( Proc)
if bAddMachining and Strategy.Result.sStatus ~= 'Not-Applicable' then
-- le lunghezza richiede spezzatura
if ( Proc.b3Box:getDimX() > BeamData.LONGCUT_MAXLEN) or ( Proc.b3Box:getDimX() > 0.7 * Part.b3Solid:getDimX() and Proc.b3Box:getDimX() > BeamData.LONGCUT_ENDLEN) then
-- recupero gruppo per geometria aggiuntiva
local nAddGrpId = BeamLib.GetAddGroup( Part.idPart)
local vAddId = {}
local bStartLeft, bStartRight
-- se feature inizia al di sotto del limite sinistro
if Proc.b3Box:getMin():getX() < Part.b3Solid:getMin():getX() + BeamData.LONGCUT_ENDLEN then
bStartLeft = true
end
-- se feature inizia al di sotto del limite destro
if Proc.b3Box:getMax():getX() > Part.b3Solid:getMax():getX() - BeamData.LONGCUT_ENDLEN then
bStartRight = true
end
-- salvo valori
local dNewMinX = Proc.b3Box:getMin():getX()
local dNewMaxX = Proc.b3Box:getMax():getX()
local dNewRest = Proc.b3Box:getDimX()
-- creo primo spezzone sulla sinistra
if bStartLeft then
local AddId = EgtCopyGlob( Proc.id, nAddGrpId) or GDB_ID.NULL
dNewMinX = max( ( Proc.b3Box:getMin():getX() + TOOLS[ToolInfo.nToolIndex].dDiameter * 2), Part.b3Solid:getMin():getX() + BeamData.LONGCUT_ENDLEN)
local ptOn = Point3d( dNewMinX, 0, 0)
dNewRest = abs( dNewMaxX - dNewMinX)
-- taglio della superficie lato sinistro
EgtCutSurfTmPlane( AddId, ptOn, X_AX(), true, GDB_RT.GLOB)
-- eseguo inserimento
table.insert( vAddId, AddId)
end
-- creo spezzone sulla destra
if bStartRight then
local AddId = EgtCopyGlob( Proc.id, nAddGrpId) or GDB_ID.NULL
dNewMaxX = min( ( Proc.b3Box:getMax():getX() - TOOLS[ToolInfo.nToolIndex].dDiameter * 2), Part.b3Solid:getMax():getX() - BeamData.LONGCUT_ENDLEN)
local ptOn = Point3d( dNewMaxX, 0, 0)
dNewRest = abs( dNewMaxX - dNewMinX)
-- taglio della superficie lato destro
EgtCutSurfTmPlane( AddId, ptOn, -X_AX(), true, GDB_RT.GLOB)
-- eseguo inserimento
table.insert( vAddId, EgtIf( BeamData.RIGHT_LOAD, 2, 1),AddId)
end
-- lavoro il restante
local nSplitParts = max( ceil( dNewRest / BeamData.LONGCUT_MAXLEN + 10 * GEO.EPS_SMALL), 2)
local dSplitPartsLen = dNewRest / nSplitParts
for i = 1, nSplitParts do
local AddId = EgtCopyGlob( Proc.id, nAddGrpId) or GDB_ID.NULL
local ptOn
-- eseguo trim sinistro
if i ~= 1 or bStartLeft then
ptOn = Point3d( dNewMinX, 0, 0)
-- taglio della superficie lato sinistro
EgtCutSurfTmPlane( AddId, ptOn, -X_AX(), true, GDB_RT.GLOB)
end
-- eseguo trim destro
dNewMaxX = dNewMinX + dSplitPartsLen
if i ~= nSplitParts or bStartRight then
ptOn = Point3d( dNewMaxX, 0, 0)
-- taglio della superficie lato destro
EgtCutSurfTmPlane( AddId, ptOn, X_AX(), true, GDB_RT.GLOB)
end
-- il nuovo minimo è il punto massimo del precedente
dNewMinX = dNewMaxX
-- eseguo inserimento in modo da ordinare da X- a X+
table.insert( vAddId, EgtIf( BeamData.RIGHT_LOAD, 1+i, EgtIf( bStartLeft, 1, 2)), AddId)
end
-- setto i parametri di base comuni
Pocketing.nType = MCH_OY.POCKETING
Pocketing.nSubType = EgtIf( Proc.Topology.sName == 'Pocket-5-Blind', MCH_POCK_SUB.SPIRALOUT, MCH_POCK_SUB.SPIRALIN)
Pocketing.LeadIn.nType = MCH_POCK_LI.ZIGZAG
Pocketing.idProc = Proc.id
-- si applicano le lavorazioni
for i = 1, #vAddId do
for j = 1, #Strategy.Machining do
if Strategy.Machining[i].bIsApplicable then
Pocketing.Steps.dStep = TOOLS[Strategy.Machining[j].ToolInfo.nToolIndex].dStep
Pocketing.Steps.dSideStep = TOOLS[Strategy.Machining[j].ToolInfo.nToolIndex].dSideStep
Pocketing.nToolIndex = Strategy.Machining[j].ToolInfo.nToolIndex
Pocketing.LeadIn.dTangentDistance = TOOLS[Strategy.Machining[j].ToolInfo.nToolIndex].dDiameter/2
Pocketing.LeadIn.dElevation = TOOLS[Strategy.Machining[j].ToolInfo.nToolIndex].dDiameter/2
Pocketing.sDepth = -Strategy.Machining[j].ToolInfo.dResidualDepth
if j == 4 then
Pocketing.bToolInvert = true
end
-- TODO settare parametro per indicare qual è lo spezzone che deve essere fatto dopo il taglio di separazione
for k=1, Proc.nFct do
local vtNSplitFace
_, vtNSplitFace = EgtSurfTmFacetCenter( vAddId[i], k - 1, GDB_ID.ROOT)
if vtNSplitFace and AreSameVectorExact( vtNSplitFace, Strategy.Machining[j].vtFaceNormal) then
Pocketing.idFaceToMachine = k - 1
Pocketing.idProc = vAddId[i]
bApplyMachiningOK, Strategy.Result.sInfo = MachiningLib.AddNewMachining( Pocketing)
break
end
end
end
end
end
else
Pocketing.nType = MCH_OY.POCKETING
Pocketing.nSubType = EgtIf( Proc.Topology.sName == 'Pocket-5-Blind', MCH_POCK_SUB.SPIRALOUT, MCH_POCK_SUB.SPIRALIN)
Pocketing.LeadIn.nType = MCH_POCK_LI.ZIGZAG
for i = 1, #Strategy.Machining do
if Strategy.Machining[i].bIsApplicable then
Pocketing.Steps.dStep = TOOLS[Strategy.Machining[i].ToolInfo.nToolIndex].dStep
Pocketing.Steps.dSideStep = TOOLS[Strategy.Machining[i].ToolInfo.nToolIndex].dSideStep
Pocketing.nToolIndex = Strategy.Machining[i].ToolInfo.nToolIndex
Pocketing.LeadIn.dTangentDistance = TOOLS[Strategy.Machining[i].ToolInfo.nToolIndex].dDiameter/2
Pocketing.LeadIn.dElevation = TOOLS[Strategy.Machining[i].ToolInfo.nToolIndex].dDiameter/2
Pocketing.sDepth = -Strategy.Machining[i].ToolInfo.dResidualDepth
if i == 4 and Strategy.Machining[i].bInvertTool then
Pocketing.bToolInvert = true
end
Pocketing.idProc = Strategy.Machining[i].idProc
Pocketing.idFaceToMachine = Strategy.Machining[i].idFaceToMachine
bApplyMachiningOK, Strategy.Result.sInfo = MachiningLib.AddNewMachining( Pocketing)
end
end
end
else
bApplyMachiningOK = false
end
return bApplyMachiningOK, Strategy.Result
end
-------------------------------------------------------------------------------------------------------------
return STR0002
Reference in New Issue View Git Blame Copy Permalink