// Message File EgalTech English 2026/06/23 0=ENG // ----- BeamNew ----- 1000001=Part loading position 1000002=Part loading position 1000003=Loading position from BTL, no pre-rotation 1000004=Loading position from BTL, no pre-rotation 1000005=Get Best loading position from 0° and 180° 1000006=Get Best loading position from 0° and 180° 1000007=Get Best loading position in each piece rotation 1000008=Get Best loading position in each piece rotation 1000009=Allow piece inversion 1000010=Allow piece inversion 1000011=Enable material optimization function in nesting (part rotation disabled) 1000012=Enable material optimization function in nesting (part rotation disabled) 1000013=Part rotating acceptability 1000014=Acceptability of rotating the part between machining steps 1000015=Rotation not allowed 1000016=Rotation not allowed 1000017=Rotation allowed only if strictly necessary 1000018=Rotation allowed only if strictly necessary 1000019=Rotation easily acceptable / no constraint 1000020=Rotation easily acceptable / no constraint 1000021=Machining Strategy 1000022=Machining Strategy 1000023=Quality and time equally prioritized 1000024=Quality and time equally prioritized 1000025=Fastest 1000026=Prefer fastest strategies 1000027=High quality 1000028=Prefer high-quality strategies 1000029=Ordering rules 1000030=The first complete strategy in list is the one chosen; no intelligent choosing 1000031=Max number of reprocessing cycles 1000032=Max number of reprocessing cycles 1000033=Use entire blade diameter to shorten path 1000034=Use entire blade diameter to shorten path 1000035=Maximum length for dropped waste 1000036=Maximum length for dropped waste 1000037=Maximum volume for dropped waste 1000038=Maximum volume for dropped waste 1000039=Maximum dice dimension 1000040=Maximum dice dimension 1000041=Overmaterial on tenon length 1000042=Overmaterial on tenon length 1000043=Overmaterial on tenon width 1000044=Overmaterial on tenon width 1000045=Maximum number of milling passes 1000046=Maximum number of milling passes. If more passes are required, pocketing is performed 1000047=Use DoveTail tool to pocket 1000048=Use DoveTail tool to pocket 1000049=Cutting Strategy 1000050=Cutting Strategy 1000051=Automatic 1000052=Automatic 1000053=Blade only 1000054=Blade only 1000055=Mill only 1000056=Mill only 1000057=ChainSaw only 1000058=ChainSaw only 1000059=Available mill to machine the tenon cut surface 1000060=Available mill to machine the tenon cut surface 1000061=Available mill to machine the dovetail tenon 1000062=Available mill to machine the dovetail tenon 1000063=Max radius left on corners 1000064=Radius-limit left by the tool at each corner of the feature 1000065=Use Anti-Splint strategy 1000066=The strategy will apply blade cuts on corner to avoid wood splint 1000067=Extend after tail 1000068=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar 1000069=Minimum approach distance on open sides 1000070=Minimum approach distance on open sides 1000071=Available mill to pocket the feature 1000072=Available mill to pocket the feature 1000073=Finish with chainsaw if needed 1000074=Finish with chainsaw if needed 1000075=Extend after tail 1000076=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar 1000077=Force ripping blade 1000078=Force the use of ripping blade, designed for cuts parallel to the grain 1000079=Not complete with Blade radius imprint left 1000080=If the parameter is active, the automatism considers the feature as - not complete - if the blade radius imprint is left 1000081=Use Zig-Zag ChainSaw 1000082=Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement. 1000083=Sort by segment 1000084=Sort the machinings according to the piece-segment where the machining has inserted 1000085=Damage next piece 1000086=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time 1000087=Never damage 1000088=Never damage 1000089=Damage only if raw 1000090=Damage only if raw 1000091=Can damage 1000092=Can damage 1000093=Use Zig-Zag ChainSaw 1000094=Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement. 1000095=Extend after tail 1000096=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar 1000097=Damage next piece 1000098=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time 1000099=Never damage 1000100=Never damage 1000101=Damage only if raw 1000102=Damage only if raw 1000103=Can damage 1000104=Can damage 1000105=Force ripping blade 1000106=Force the use of ripping blade, designed for cuts parallel to the grain 1000107=Extend after tail 1000108=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar 1000109=Damage next piece 1000110=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time 1000111=Never damage 1000112=Never damage 1000113=Damage only if raw 1000114=Damage only if raw 1000115=Can damage 1000116=Can damage 1000117=Cutting strategy 1000118=Cutting strategy 1000119=Automatic 1000120=Automatic 1000121=Drop waste 1000122=Drop waste 1000123=Keep waste attached 1000124=Keep waste attached 1000125=Disable dicing 1000126=Disable dicing 1000127=Prioritize machining speed over quality 1000128=Prioritize machining speed over quality 1000129=Strip width 1000130=In case the waste is still kept attached, this is the wigth dimension of the strip 1000131=Clean blade radius with mill 1000132=Clean blade radius with mill 1000133=Milling offset from side 1000134=Milling offset from side 1000135=Overmaterial on tenon length 1000136=Overmaterial on tenon length 1000137=Overmaterial on tenon width 1000138=Overmaterial on tenon width 1000139=Maximum number of milling passes 1000140=Maximum number of milling passes. If more passes are required, pocketing is performed 1000141=Cutting Strategy 1000142=Cutting Strategy 1000143=Automatic 1000144=Automatic 1000145=Blade only 1000146=Blade only 1000147=Mill only 1000148=Mill only 1000149=ChainSaw only 1000150=ChainSaw only 1000151=Available mill to machine the tenon 1000152=Available mill to machine the tenon 1000153=Overmaterial on Mortise length 1000154=Overmaterial on Mortise length 1000155=Overmaterial on Mortise width 1000156=Overmaterial on Mortise width 1000157=Maximum number of milling passes 1000158=Maximum number of milling passes. If more passes are required, pocketing is performed 1000159=Use DoveTail tool in case of pocketing 1000160=Use DoveTail tool in case of pocketing 1000161=Add Anti-Splint 1000162=Add Anti-Splint 1000163=Cutting Strategy 1000164=Cutting Strategy 1000165=Automatic 1000166=Automatic 1000167=Blade only 1000168=Blade only 1000169=Mill only 1000170=Mill only 1000171=ChainSaw only 1000172=ChainSaw only 1000173=Available mill to machine the mortise cut surface 1000174=Available mill to machine the mortise cut surface 1000175=Available mill to machine the dovetail mortise 1000176=Available mill to machine the dovetail mortise 1000177=Overmaterial on mortise length 1000178=Overmaterial on mortise length 1000179=Overmaterial on mortise width 1000180=Overmaterial on mortise width 1000181=Cutting Strategy 1000182=Cutting Strategy 1000183=Automatic 1000184=Automatic 1000185=Blade only 1000186=Blade only 1000187=Mill only 1000188=Mill only 1000189=ChainSaw only 1000190=ChainSaw only 1000191=Available mill to machine the mortise cut surface 1000192=Available mill to machine the mortise cut surface 1000193=Available mill to machine the mortise 1000194=Available mill to machine the mortise 1000195=Depth Chamfer 1000196=Depth of the V-Mill to execute chamfers on cut-edges 1000197=Use Anti-Splint strategy 1000198=The strategy will apply blade cuts on corner to avoid wood splint 1000199=Available mill to machine the profile 1000200=Available mill to machine the profile 1000201=Antisplint with blade 1000202=Use the blade as antisplint in case the geometry is not through 1000203=Extend after tail 1000204=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar 1000205=Clean radius with mill 1000206=Clean radius with mill 1000207=Milling offset from side 1000208=Milling offset from side 1000209=Damage next piece 1000210=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time 1000211=Never damage 1000212=Never damage 1000213=Damage only if raw 1000214=Damage only if raw 1000215=Can damage 1000216=Can damage 1000217=Tolerance on Diameter 1000218=Tolerance on Diameter 1000219=Depth PreHole 1000220=Depth PreHole 1000221=Drilling Mode 1000222=Drilling Mode 1000223=Automatic 1000224=Automatic 1000225=Preferred machining from one side only 1000226=Preferred machining from one side only 1000227=Force machining from two sides 1000228=Force machining from two sides 1000229=Available Drillbit list 1000230=Available Drillbit list 1000231=Extend after tail 1000232=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar 1000233=Damage next piece 1000234=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time 1000235=Never damage 1000236=Never damage 1000237=Damage only if raw 1000238=Damage only if raw 1000239=Can damage 1000240=Can damage 1000241=Ridge Lap strategy 1000242=Ridge Lap strategy 1000243=Automatic 1000244=Automatic 1000245=Use blade 1000246=Use blade 1000247=Use mill 1000248=Use mill 1000249=Tolerance on Diameter 1000250=Tolerance on Diameter 1000251=Use mill as a drillbit 1000252=Admit to use the mill as a drillbit 1000253=Execute contour only 1000254=Execute the contour anyway, even the hole is bigger than the tool diameter 1000255=Drilling mode 1000256=Drilling mode 1000257=Automatic 1000258=Automatic 1000259=Preferred machining from one side only 1000260=Preferred machining from one side only 1000261=Force machining from two sides 1000262=Force machining from two sides 1000263=Available mill to machine drills 1000264=Available mill to machine drills 1000265=Machining Depth 1000266=Machining Depth 1000267=Available mill to machine mark and text 1000268=Available mill to machine mark and text 1000269=Marking Strategy 1000270=Marking Strategy 1000271=Automatic 1000272=Automatic 1000273=Pen only 1000274=Pen only 1000275=V-Mill only 1000276=V-Mill only 1000277=Depth Chamfer 1000278=Depth of the V-Mill to execute chamfers on cut-edges 1000279=Only Chamfer 1000280=Execute the chamfer only, no other machining 1000281=Overmaterial 1000282=Overmaterial 1000283=Max radius left on corners 1000284=Radius-limit left by the tool at each corner of the feature 1000285=Execute cut to remove material 1000286=Execute cut to remove material 1000287=Force strip 1000288=Enable the parameter to force the software to leave a strip to sustain the piece 1000289=Strip width 1000290=Width of the strip in case if foreseen from the machining 1000291=Cutting Strategy 1000292=Cutting Strategy 1000293=Automatic 1000294=Automatic 1000295=No machining 1000296=No machining 1000297=Blade forced 1000298=Blade forced 1000299=Mill forced 1000300=Mill forced 1000301=Available mill to machine the profile 1000302=Available mill to machine the profile 1000303=Depth Chamfer 1000304=Depth of the V-Mill to execute chamfers on cut-edges 1000305=Force to use chain saw 1000306=Force to use chain saw 1000307=Force to add PreCuts 1000308=Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length 1000309=Finish with mill 1000310=Use a mill to finish the surface if split with chain saw 1000311=Depth Chamfer 1000312=Depth of the V-Mill to execute chamfers on cut-edges 1000313=Force to use chain saw 1000314=Force to use chain saw 1000315=Force to add PreCuts 1000316=Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length 1000317=Finish with mill 1000318=Use a mill to finish the surface if split with chain saw 1000319=Allow multiple short strips 1000320=Allow multiple short strips 1000321=Length limit to drop the waste 1000322=If Cutting Strategy is set on AUTO, up to this length the software drop the waste, otherwise it'll keep attached // ----- End -----