Merge branch 'develop' into DicingPreSimDynamicRaw

- in BLADETOWASTE.UpdateDiceRaw alcune correzioni

BatchProcessNew.lua

@@ -388,6 +388,15 @@ if bToProcess then
             else
                PARTS[i].b3PartOriginal = b3Solid
             end
+            if BeamData.MAX_LENGTH and BeamData.MAX_LENGTH > 10 and b3Solid:getDimX() > BeamData.MAX_LENGTH then
+               local sOut = 'Piece-Length ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                         'out of machine limits (' .. EgtNumToString( BeamData.MAX_LENGTH, 2) .. ') '
+               BEAM.ERR = 17
+               BEAM.MSG = sOut
+               WriteErrToLogFile( BEAM.ERR, BEAM.MSG)
+               PostErrView( BEAM.ERR, BEAM.MSG)
+               return
+            end
          end
          -- Assegno lunghezza della barra
          dBarLen = PARTS[1].b3PartOriginal:getDimX() + 10
@@ -447,6 +456,15 @@ if bToProcess then
          else
             PARTS[i].b3PartOriginal = b3Solid
          end
+         if BeamData.MAX_LENGTH and BeamData.MAX_LENGTH > 10 and b3Solid:getDimX() > BeamData.MAX_LENGTH then
+            local sOut = 'Piece-Length ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                         'out of machine limits (' .. EgtNumToString( BeamData.MAX_LENGTH, 2) .. ') '
+            BEAM.ERR = 17
+            BEAM.MSG = sOut
+            WriteErrToLogFile( BEAM.ERR, BEAM.MSG)
+            PostErrView( BEAM.ERR, BEAM.MSG)
+            return
+         end
       end
    end
 

LuaLibs/MachiningLib.lua

@@ -347,7 +347,7 @@ local function TestEngagement( sBladeEngagement, Parameters, OptionalParameters)
       return false
    end
    -- lavorazione in collisione con il pezzo: non fattibile
-   local bCollisionFound, bMoveAfterSplit = PreSimulationLib.CheckCollision( sBladeEngagement, CheckCollisionParameters, CheckCollisionOptionalParameters)
+   local bCollisionFound, bMoveAfterSplit = PreSimulationLib.CheckCollision( CheckCollisionParameters, CheckCollisionOptionalParameters)
    if bCollisionFound then
       return false
    end
@@ -373,7 +373,7 @@ local function TestEngagement( sBladeEngagement, Parameters, OptionalParameters)
       CheckCollisionOptionalParameters.PointsToCheck = {}
       table.insert( CheckCollisionOptionalParameters.PointsToCheck, PerpendicularLeadInOut.LeadIn.ptPoint)
       table.insert( CheckCollisionOptionalParameters.PointsToCheck, PerpendicularLeadInOut.LeadOut.ptPoint)
-      local bCollisionFoundPerpendicular, bMoveAfterSplitPerpendicular = PreSimulationLib.CheckCollision( sBladeEngagement, CheckCollisionParameters, CheckCollisionOptionalParameters)
+      local bCollisionFoundPerpendicular, bMoveAfterSplitPerpendicular = PreSimulationLib.CheckCollision( CheckCollisionParameters, CheckCollisionOptionalParameters)
       -- attacco perpendicolare possibile
       if not bCollisionFoundPerpendicular then
          LeadInOut.Perpendicular = PerpendicularLeadInOut
@@ -403,7 +403,7 @@ local function TestEngagement( sBladeEngagement, Parameters, OptionalParameters)
       CheckCollisionOptionalParameters.PointsToCheck = {}
       table.insert( CheckCollisionOptionalParameters.PointsToCheck, TangentLeadInOut.LeadIn.ptPoint)
       table.insert( CheckCollisionOptionalParameters.PointsToCheck, TangentLeadInOut.LeadOut.ptPoint)
-      local bCollisionFoundTangent, bMoveAfterSplitTangent = PreSimulationLib.CheckCollision( sBladeEngagement, CheckCollisionParameters, CheckCollisionOptionalParameters)
+      local bCollisionFoundTangent, bMoveAfterSplitTangent = PreSimulationLib.CheckCollision( CheckCollisionParameters, CheckCollisionOptionalParameters)
       -- attacco tangenziale possibile
       if not bCollisionFoundTangent then
          LeadInOut.Tangent = TangentLeadInOut
@@ -628,7 +628,7 @@ function MachiningLib.FindBlade( Proc, ToolSearchParameters)
    local bForceLongcutBlade = ToolSearchParameters.bForceLongcutBlade or false
    local EdgeToMachine = ToolSearchParameters.EdgeToMachine
    local Part = ToolSearchParameters.Part
-   local bIsDicing = ToolSearchParameters.bIsDicing or false
+   local idCheckCollisionTm = ToolSearchParameters.idCheckCollisionTm
    local sRestLengthSideForPreSimulation = ToolSearchParameters.sRestLengthSideForPreSimulation or 'Tail'
    local bCannotSplitRestLength = ToolSearchParameters.bCannotSplitRestLength or false
    local bDisableRealElevationCheck = ToolSearchParameters.bDisableRealElevationCheck or false
@@ -663,7 +663,7 @@ function MachiningLib.FindBlade( Proc, ToolSearchParameters)
                dDepthToMachine = min( dElevation, TOOLS[i].dMaxDepth)
             }
             local BladeEngagementOptionalParameters = {
-               bIsDicing = bIsDicing,
+               idCheckCollisionTm = idCheckCollisionTm,
                sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
                bCannotSplitRestLength = bCannotSplitRestLength,
                bDisableRealElevationCheck = bDisableRealElevationCheck

LuaLibs/PreSimulationLib.lua

@@ -305,7 +305,7 @@ local function MoveMachineAxesToPosition( ptOnToolTipCenter, vtHead, vtAux)
 end
 
 -------------------------------------------------------------------------------------------------------------
-local function CheckCollisionPoint( sAxis, ptOnToolTipCenter, vtHead, vtAux, Part, bCannotSplitRestLength, sRestLengthSideForPreSimulation, bCheckOnlyRestlength)
+local function CheckCollisionPoint( sAxis, ptOnToolTipCenter, vtHead, vtAux, Part, bCannotSplitRestLength, sRestLengthSideForPreSimulation, idCheckCollisionTm)
 
    -- spostamento assi macchina in posizione
    local dDeltaXHeadOffset = MoveMachineAxesToPosition( ptOnToolTipCenter, vtHead, vtAux)
@@ -337,32 +337,32 @@ local function CheckCollisionPoint( sAxis, ptOnToolTipCenter, vtHead, vtAux, Par
 
    -- check collisione con pezzo
    local bCollisionFoundPiece = false
-   if not bCheckOnlyRestlength then
+   if not idCheckCollisionTm then
-      local idCheckCollisionTm = Part.idBoxTm
+      idCheckCollisionTm = Part.idBoxTm
       -- se testa o coda attaccate, si considerano nella superficie di collisione
       if bCannotSplitRestLength then
          local b3CheckCollision = BeamLib.GetPartBoxWithHeadTail( Part, sRestLengthSideForPreSimulation)
          idCheckCollisionTm = EgtSurfTmBBox( Part.idTempGroup, b3CheckCollision, false, GDB_RT.GLOB)
       end
-      for i = 1, #CollisionSurfTmId do
+   end
-         bCollisionFoundPiece = EgtCDeSolidSolid( idCheckCollisionTm, CollisionSurfTmId[i], BeamData.COLL_SIC)
+   for i = 1, #CollisionSurfTmId do
-         if not type( bCollisionFoundPiece) == "boolean" then
+      bCollisionFoundPiece = EgtCDeSolidSolid( idCheckCollisionTm, CollisionSurfTmId[i], BeamData.COLL_SIC)
-            error( 'Presimulation fail')
+      if not type( bCollisionFoundPiece) == "boolean" then
-         end
+         error( 'Presimulation fail')
-         if EgtGetDebugLevel() >= 3 and bCollisionFoundPiece then
-            EgtSetColor( CollisionSurfTmId[i], RED())
-         end
-         if bCollisionFoundPiece then
-            break
-         end
       end
+      if EgtGetDebugLevel() >= 3 and bCollisionFoundPiece then
+         EgtSetColor( CollisionSurfTmId[i], RED())
+      end
+      if bCollisionFoundPiece then
+         break
+      end
+   end
 
       -- se trovata collisione con pezzo è inutile procedere con il grezzo
       if bCollisionFoundPiece then
 
          return true
       end
-   end
 
    -- check collisione con grezzo restante, se con il pezzo non c'è collisione e non è un taglio di testa o coda
    local bCollisionFoundRestLength = false
@@ -401,7 +401,7 @@ local function CheckCollisionWithAxis( sAxis, MachiningParameters, OptionalParam
 
    -- parametri opzionali
    OptionalParameters = OptionalParameters or {}
-   local bCheckOnlyRestlength = OptionalParameters.bCheckOnlyRestlength or false
+   local idCheckCollisionTm = OptionalParameters.idCheckCollisionTm
    local sRestLengthSideForPreSimulation = OptionalParameters.sRestLengthSideForPreSimulation or 'Tail'
    local bCannotSplitRestLength = OptionalParameters.bCannotSplitRestLength or false
    local vtAux = OptionalParameters.vtAux
@@ -426,7 +426,7 @@ local function CheckCollisionWithAxis( sAxis, MachiningParameters, OptionalParam
    -- se non si trova collisione si ritorna se è necessario separare prima di effettuare la lavorazione (ossia non c'è collisione con il pezzo ma c'è con il grezzo restante)
    for i = 1, #PointsOnToolTipCenter do
 
-      local bCollisionFoundPiece, bCollisionFoundRestLength = CheckCollisionPoint( sAxis, PointsOnToolTipCenter[i], vtHead, vtAux, Part, bCannotSplitRestLength, sRestLengthSideForPreSimulation, bCheckOnlyRestlength)
+      local bCollisionFoundPiece, bCollisionFoundRestLength = CheckCollisionPoint( sAxis, PointsOnToolTipCenter[i], vtHead, vtAux, Part, bCannotSplitRestLength, sRestLengthSideForPreSimulation, idCheckCollisionTm)
 
       -- se trovata collisione con pezzo è inutile controllare gli altri punti
       if bCollisionFoundPiece then
@@ -445,7 +445,7 @@ local function CheckCollisionWithAxis( sAxis, MachiningParameters, OptionalParam
 end
 
 -------------------------------------------------------------------------------------------------------------
-function PreSimulationLib.CheckCollision( sBladeEngagement, Parameters, OptionalParameters)
+function PreSimulationLib.CheckCollision( Parameters, OptionalParameters)
 
    local bCollisionFound
    local bMoveAfterSplitL3, bMoveAfterSplitR3, bMoveAfterSplitR2, bMoveAfterSplitR1
@@ -459,24 +459,19 @@ function PreSimulationLib.CheckCollision( sBladeEngagement, Parameters, Optional
    OptionalParameters = OptionalParameters or {}
 
    local OptionalParametersCheckCollisionWithAxis = {}
-   OptionalParametersCheckCollisionWithAxis.bCheckOnlyRestlength = false
    OptionalParametersCheckCollisionWithAxis.PointsToCheck = OptionalParameters.PointsToCheck or nil
    OptionalParametersCheckCollisionWithAxis.sRestLengthSideForPreSimulation = OptionalParameters.sRestLengthSideForPreSimulation or 'Tail'
    OptionalParametersCheckCollisionWithAxis.bCannotSplitRestLength = OptionalParameters.bCannotSplitRestLength or false
    OptionalParametersCheckCollisionWithAxis.sBlockedAxis = OptionalParameters.sBlockedAxis
    OptionalParametersCheckCollisionWithAxis.vtAux = OptionalParameters.vtAux
+   OptionalParametersCheckCollisionWithAxis.idCheckCollisionTm = OptionalParameters.idCheckCollisionTm
 
    local sBlockedAxis = OptionalParameters.sBlockedAxis
-   local bIsDicing = OptionalParameters.bIsDicing or false
    local bDisableRealElevationCheck = OptionalParameters.bDisableRealElevationCheck or false
-   local bCheckOnlyRestlengthForAxisABC = false
 
-   -- se cubetti in modalità standard (no DownUp) gli assi AB e C si controllano solo con grezzo (ci sarebbe collisione con il materiale già rimosso controllando AB e C con pezzo)
-   if bIsDicing and ( sBladeEngagement == 'Standard') then
-      bCheckOnlyRestlengthForAxisABC = true
    -- se l'elevazione reale (rispetto al pezzo + eventuale materiale in testa/coda) è maggiore del massimo materiale è sempre collisione
    -- TODO rifare con funzione
-   elseif not bDisableRealElevationCheck then
+   if not bDisableRealElevationCheck then
       local Edge = Parameters.Edge
       local vtNFace = Parameters.vtNFace
       local dDepthToMachine = Parameters.dDepthToMachine
@@ -523,9 +518,6 @@ function PreSimulationLib.CheckCollision( sBladeEngagement, Parameters, Optional
    -- ultimo asse lineare prima dei rotativi (solitamente Z) si controlla sempre
    bCollisionFound, bMoveAfterSplitL3 = CheckCollisionWithAxis( sL3, Parameters, OptionalParametersCheckCollisionWithAxis)
 
-   -- assi rotativi: se richiesto si controlla la collisione solo col grezzo
-   OptionalParametersCheckCollisionWithAxis.bCheckOnlyRestlength = bCheckOnlyRestlengthForAxisABC
-
    if sR3 and not bCollisionFound then
       bCollisionFound, bMoveAfterSplitR3 = CheckCollisionWithAxis( sR3, Parameters, OptionalParametersCheckCollisionWithAxis)
    end

Process.lua

@@ -131,6 +131,14 @@ local function MyProcessInputData()
       else
          PARTS[i].b3PartOriginal = b3Solid
       end
+      if BeamData.MAX_LENGTH and BeamData.MAX_LENGTH > 10 and b3Solid:getDimX() > BeamData.MAX_LENGTH then
+         local sOut = 'Lunghezza ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                      'oltre i limiti della macchina (' .. EgtNumToString( BeamData.MAX_LENGTH, 2) .. ') '
+         EgtOutLog( sOut)
+         EgtOutBox( sOut, 'Lavora Travi', 'WARNING')
+         EgtDraw()
+         return false
+      end
    end
    dRawW = PARTS[1].b3PartOriginal:getDimY()
    dRawH = PARTS[1].b3PartOriginal:getDimZ()

Strategies/Standard/STR0001/STR0001.lua

@@ -87,6 +87,7 @@ local function GetTenonStrategy( Proc, Part)
       ToolSearchParameters.dElevation = EgtSurfTmFacetElevationInBBox( Strategy.idTenonCutPlane, 0, Part.b3Part, true, GDB_ID.ROOT)
 
       ToolSearchParameters.vtToolDirection = Proc.FeatureInfo.vtTenonN
+      ToolSearchParameters.sMillShape = 'STANDARD'
       ToolSearchParameters.AvailableToolList = MachiningLib.GetAvailableToolList( Proc, Strategy.Parameters.sPocketingList, 'Pocketing')
       Machining.Cutting.ToolInfo = MachiningLib.FindMill( Proc, ToolSearchParameters)
 

StrategyLibs/BLADETOWASTE.lua

@@ -260,7 +260,7 @@ local function GetBestBlade( Proc, Part, Face, OptionalParameters)
    local dShortPartLength = OptionalParameters.dShortPartLength or BeamData.LEN_SHORT_PART
    local EdgeToMachineTop = OptionalParameters.EdgeToMachineTop
    local EdgeToMachineBottom = OptionalParameters.EdgeToMachineBottom
-   local bIsDicing = OptionalParameters.bIsDicing
+   local idCheckCollisionTm = OptionalParameters.idCheckCollisionTm
    local sRestLengthSideForPreSimulation = OptionalParameters.sRestLengthSideForPreSimulation
    local bCannotSplitRestLength = OptionalParameters.bCannotSplitRestLength
    -- TODO qui sarebbe meglio avere dExtra come OptionalParameter???
@@ -289,7 +289,7 @@ local function GetBestBlade( Proc, Part, Face, OptionalParameters)
          FaceToMachine = Face,
          EdgeToMachine = EdgeToMachineTop,
          Part = Part,
-         bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength
       })
@@ -304,7 +304,7 @@ local function GetBestBlade( Proc, Part, Face, OptionalParameters)
          FaceToMachine = Face,
          EdgeToMachine = EdgeToMachineBottom,
          Part = Part,
-         bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength
       })
@@ -371,7 +371,7 @@ local function GetSingleCutStrategy( Proc, Part, OptionalParameters)
    local bReduceBladePath = OptionalParameters.bReduceBladePath or false
    local bAllowFastCuts = OptionalParameters.bAllowFastCuts or false
    local FaceToMachine = Proc.Faces[OptionalParameters.nFaceToMachineIndex or 1]
-   local bIsDicing = OptionalParameters.bIsDicing or false
+   local idCheckCollisionTm = OptionalParameters.idCheckCollisionTm
    local sRestLengthSideForPreSimulation = OptionalParameters.sRestLengthSideForPreSimulation or 'Tail'
    local bCannotSplitRestLength = OptionalParameters.bCannotSplitRestLength or false
    -- lati da lavorare in base al tipo di lama
@@ -390,7 +390,7 @@ local function GetSingleCutStrategy( Proc, Part, OptionalParameters)
       EdgeToMachineTop = EdgeToMachineList.Top,
       EdgeToMachineBottom = EdgeToMachineList.Bottom,
       nToolIndex = nToolIndex,
-      bIsDicing = bIsDicing,
+      idCheckCollisionTm = idCheckCollisionTm,
       sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
       bCannotSplitRestLength = bCannotSplitRestLength
    }
@@ -442,7 +442,7 @@ local function GetSingleCutStrategy( Proc, Part, OptionalParameters)
          FaceToMachine = FaceToMachine,
          EdgeToMachine = EdgeToMachineList.TopGuillotine,
          Part = Part,
-         bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength
       })
@@ -475,7 +475,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
    OptionalParameters = OptionalParameters or {}
    local nToolIndex = OptionalParameters.nToolIndex
    local FaceToMachine = Proc.Faces[OptionalParameters.nFaceToMachineIndex or 1]
-   local bIsDicing = OptionalParameters.bIsDicing or false
+   local idCheckCollisionTm = OptionalParameters.idCheckCollisionTm
    local sRestLengthSideForPreSimulation = OptionalParameters.sRestLengthSideForPreSimulation or 'Tail'
    local bCannotSplitRestLength = OptionalParameters.bCannotSplitRestLength or false
 
@@ -499,7 +499,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
          FaceToMachine = FaceToMachine,
          EdgeToMachine = EdgeToMachine,
          Part = Part,
-         bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength
       })
@@ -512,7 +512,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
          FaceToMachine = FaceToMachine,
          EdgeToMachine = BeamLib.FindEdgeBestOrientedAsDirection( FaceToMachine.Edges, -EdgeToMachine.vtN),
          Part = Part,
-         bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength
       })
@@ -534,7 +534,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
             FaceToMachine = FaceToMachine,
             EdgeToMachine = BeamLib.FindEdgeBestOrientedAsDirection( FaceToMachine.Edges, -EdgeToMachine.vtN),
             Part = Part,
-            bIsDicing = bIsDicing,
+            idCheckCollisionTm = idCheckCollisionTm,
             sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
             bCannotSplitRestLength = bCannotSplitRestLength
          })
@@ -553,7 +553,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
             FaceToMachine = FaceToMachine,
             EdgeToMachine = EdgeToMachine,
             Part = Part,
-            bIsDicing = bIsDicing,
+            idCheckCollisionTm = idCheckCollisionTm,
             sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
             bCannotSplitRestLength = bCannotSplitRestLength
          })
@@ -589,7 +589,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
       FaceToMachine = FaceToMachine,
       EdgeToMachine = EdgeToMachine,
       Part = Part,
-      bIsDicing = bIsDicing,
+      idCheckCollisionTm = idCheckCollisionTm,
       sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
       bCannotSplitRestLength = bCannotSplitRestLength
    })
@@ -607,7 +607,7 @@ local function GetDualSideCutStrategy( Proc, Part, OptionalParameters)
          dDepthToMachine = dDepthToMachine
       }
       local BladeEngagementOptionalParameters = {
-         bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength
       }
@@ -782,6 +782,52 @@ local function CutWholeWaste( Proc, Part, OptionalParameters)
 end
 
 
+local function UpdateDiceRaw( idRaw, idParallelTm, idPerpendicularTm, Part, MainFace, OtherFace)
+
+   -- frame solidale alla feature
+   local vtZ = MainFace.vtN
+   local vtX = OtherFace and OtherFace.vtN or nil
+   local frMainFace = Frame3d( MainFace.ptCenter, vtZ, vtX)
+
+   -- box del cubetto in riferimento feature
+   local b3Surf = EgtGetBBoxRef( idParallelTm, GDB_BB.STANDARD, frMainFace)
+   if idPerpendicularTm then
+      local b3SurfPerpendicular = EgtGetBBoxRef( idPerpendicularTm, GDB_BB.STANDARD, frMainFace)
+      b3Surf:Add( b3SurfPerpendicular)
+   else
+      -- se non arriva la superficie perpendicolare è un solo taglio parallelo: si estende il box in Z in modo da uscire dal pezzo
+      local ptDeltaZ = b3Surf:getMax() + vtZ * ( MainFace.dElevation + 5)
+      b3Surf:Add( ptDeltaZ)
+   end
+
+   -- estensione box per non avere problemi nella sottrazione booleana
+   if OtherFace and idPerpendicularTm then
+      local vtY = vtZ ^ vtX
+      local ptDeltaX = b3Surf:getMax() + vtX * 1
+      local ptDeltaZ = b3Surf:getMax() + vtZ * 1
+      local ptDeltaYplus = b3Surf:getMax() + vtY * 1
+      local ptDeltaYminus = b3Surf:getMin() - vtY * 1
+      b3Surf:Add( ptDeltaX)
+      b3Surf:Add( ptDeltaZ)
+      b3Surf:Add( ptDeltaYplus)
+      b3Surf:Add( ptDeltaYminus)
+   else
+      b3Surf:expand( 1)
+   end
+   
+   -- si porta il box in riferimento globale 
+   b3Surf:toGlob( frMainFace)
+
+   -- conversione box cubetto in superficie
+   local idSurfTmToSubtract = EgtSurfTmBBox( Part.idTempGroup, b3Surf, false, GDB_RT.GLOB)
+
+   -- sottrazione del cubetto dal grezzo
+   EgtSurfTmSubtract( idRaw, idSurfTmToSubtract)
+
+   return idRaw
+end
+
+
 local function CalculateDiceMachinings( vCuts, Parameters)
    local Machinings = {}
    local bMoveAfterSplit = false
@@ -789,6 +835,7 @@ local function CalculateDiceMachinings( vCuts, Parameters)
    local Proc = Parameters.Proc
    local Part = Parameters.Part
    local MainFace = Parameters.MainFace
+   local OtherFace = next( Parameters.OtherFace) and Parameters.OtherFace or nil
    local Tool = Parameters.Tool
    local sChosenBladeType = Parameters.sChosenBladeType
    local dExtendAfterTail = Parameters.dExtendAfterTail
@@ -797,21 +844,15 @@ local function CalculateDiceMachinings( vCuts, Parameters)
    local bCannotSplitRestLength = Parameters.bCannotSplitRestLength
    local bReduceDiceDepth = Parameters.bReduceDiceDepth
 
+   -- trimesh con RestLength
+   local b3CheckCollision = BeamLib.GetPartBoxWithHeadTail( Part, sRestLengthSideForPreSimulation)
+   local idCheckCollisionTm = EgtSurfTmBBox( Part.idTempGroup, b3CheckCollision, false, GDB_RT.GLOB)
+
    -- eventuale inversione tagli ortogonali e aggiunta informazioni alla geometria
    local bAreOrthogonalCutsInverted = false
    for i = 1, #vCuts do
       for j = 1, #vCuts[i] do
          SetDiceFaceInfo( Proc, vCuts[i][j])
-         -- TODO vedere se questa parte serve ancora; in teoria no perchè il taglio è girato automaticamente nella FaceByBlade
-         -- if ( i % 2) == 1 then
-         --    local vtO = EgtSurfTmFacetNormVersor( vCuts[i][j], 0, GDB_ID.ROOT)
-         --    if MachiningLib.IsFaceZOutOfRange( vtO, Tool) then
-         --       EgtInvertSurf( vCuts[i][j])
-         --       local vtCurrentFaceNormal = EgtSurfTmFacetNormVersor( vCuts[i][j], 0, GDB_ID.ROOT)
-         --       EgtMove( vCuts[i][j], -vtCurrentFaceNormal * Tool.dThickness, GDB_RT.GLOB)
-         --       bAreOrthogonalCutsInverted = true
-         --    end
-         -- end
       end
    end
    -- calcolo lavorazioni
@@ -852,19 +893,17 @@ local function CalculateDiceMachinings( vCuts, Parameters)
       end
       -- calcolo lavorazione della singola faccia
       -- per tagli paralleli e faccia aperta si prova a tagliare come se fosse una faccia singola, accorpando i tagli
-      -- TODO bIsDicing è da mettere a true?
       local bCanMergeParallelCuts = ( ( i % 2) == 0) and ( Proc.nFct == 1)
       local bIsDicingOk = true
       if bCanMergeParallelCuts then
          local nAddGrpId = BeamLib.GetAddGroup( Part.id)
-         local nSurfToCut = EgtSurfTmBySewing( nAddGrpId, vCuts[i], false)
+         local idSurfToCut = EgtSurfTmBySewing( nAddGrpId, vCuts[i], false)
-         local ProcTrimesh = FeatureLib.GetProcFromTrimesh( nSurfToCut, Part)
+         local ProcTrimesh = FeatureLib.GetProcFromTrimesh( idSurfToCut, Part)
 
          local OptionalParametersCutWholeWaste = {
             nToolIndex = Tool.nIndex,
             dExtendAfterTail = dExtendAfterTail,
             bReduceBladePath = bReduceBladePath,
-            bIsDicing = false,
             sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
             bCannotSplitRestLength = bCannotSplitRestLength
          }
@@ -877,8 +916,12 @@ local function CalculateDiceMachinings( vCuts, Parameters)
                   bMoveAfterSplit = true
                end
             end
+            -- aggiornamento grezzo dinamico
+            if i % 2 == 0 then
+               UpdateDiceRaw( idCheckCollisionTm, idSurfToCut, vCuts[i-1][#vCuts[i-1]], Part, MainFace, OtherFace)
+            end
          else
-            EgtErase( nSurfToCut)
+            EgtErase( idSurfToCut)
             bIsDicingOk = false
          end
       end
@@ -919,9 +962,10 @@ local function CalculateDiceMachinings( vCuts, Parameters)
                dRadialStepSpan = 0,
                dExtendAfterTail = dExtendAfterTail,
                bIsDicing = true,
+               idCheckCollisionTm = idCheckCollisionTm,
                sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
                bCannotSplitRestLength = bCannotSplitRestLength,
-               bDisableRealElevationCheck = ( i % 2) > 0 -- se taglio perpendicolare non si deve mai considerare il materiale precedente
+               bDisableRealElevationCheck = true
             }
             Cutting = FaceByBlade.Make( ProcTrimesh, Part, FaceToMachine, EdgeToMachine, OptionalParametersFaceByBlade)
             Cutting.ptCenter = Point3d( ProcTrimesh.Faces[1].ptCenter:getX(), 0, 0)
@@ -936,6 +980,10 @@ local function CalculateDiceMachinings( vCuts, Parameters)
             if Cutting.sStage == 'AfterTail' then
                bMoveAfterSplit = true
             end
+            -- aggiornamento grezzo dinamico
+            if i % 2 == 0 then
+               UpdateDiceRaw( idCheckCollisionTm, vCuts[i][j], vCuts[i-1][j], Part, MainFace, OtherFace)
+            end
          end
       end
    end
@@ -1013,6 +1061,7 @@ local function CutWithDicing( Proc, Part, OptionalParameters)
       Proc = Proc,
       Part = Part,
       MainFace = Face1,
+      OtherFace = Face2,
       Tool = TOOLS[nToolIndex],
       sChosenBladeType = sChosenBladeType,
       dExtendAfterTail = dExtendAfterTail,

StrategyLibs/FACEBYBLADE.lua

@@ -209,6 +209,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
    local dRadialStepSpan = OptionalParameters.dRadialStepSpan
    local sUserNotes = OptionalParameters.sUserNotes or ''
    local bIsDicing = OptionalParameters.bIsDicing or false
+   local idCheckCollisionTm = OptionalParameters.idCheckCollisionTm
    local sRestLengthSideForPreSimulation = OptionalParameters.sRestLengthSideForPreSimulation or 'Tail'
    local bCannotSplitRestLength = OptionalParameters.bCannotSplitRestLength or false
    local bDisableRealElevationCheck = OptionalParameters.bDisableRealElevationCheck or false
@@ -237,6 +238,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
       end
       local BladeEngagementOptionalParameters = {
          bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength,
          bDisableRealElevationCheck = bDisableRealElevationCheck
@@ -360,6 +362,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
       }
       local BladeEngagementOptionalParameters = {
          bIsDicing = bIsDicing,
+         idCheckCollisionTm = idCheckCollisionTm,
          sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
          bCannotSplitRestLength = bCannotSplitRestLength,
          bDisableRealElevationCheck = bDisableRealElevationCheck
@@ -478,6 +481,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
          }
          local BladeEngagementOptionalParameters = {
             bIsDicing = bIsDicing,
+            idCheckCollisionTm = idCheckCollisionTm,
             sRestLengthSideForPreSimulation = sRestLengthSideForPreSimulation,
             bCannotSplitRestLength = bCannotSplitRestLength,
             bDisableRealElevationCheck = bDisableRealElevationCheck

UpdateLog.txt

@@ -1,4 +1,4 @@
            ==== Beam Update Log ====
 
-Versione 2.6-- (--/--/2024)
+Versione 3.1e1 (29/05/2026)
-- Primo commit creazione nuovo automatismo BEAM con strategie
+- Primo commit nuovo automatismo a strategie

Version.lua

@@ -2,5 +2,5 @@
 -- Gestione della versione di Beam
 
 NAME = 'Beam'
-VERSION = '2.8a1'
+VERSION = '3.1e1'
-MIN_EXE = '2.7j2'
+MIN_EXE = '3.1e1'