diff --git a/Messages/EgalTechEng.txt b/Messages/EgalTechEng.txt
new file mode 100644
index 0000000..eeed5ec
--- /dev/null
+++ b/Messages/EgalTechEng.txt
@@ -0,0 +1,322 @@
+// Message File EgalTech English  2026/06/23
+0=ENG
+// ----- BeamNew -----
+1000001=Part loading position
+1000002=Part loading position
+1000003=Loading position from BTL, no pre-rotation
+1000004=Loading position from BTL, no pre-rotation
+1000005=Get Best loading position from 0° and 180°
+1000006=Get Best loading position from 0° and 180°
+1000007=Get Best loading position in each piece rotation
+1000008=Get Best loading position in each piece rotation
+1000009=Allow piece inversion
+1000010=Allow piece inversion
+1000011=Enable material optimization function in nesting (part rotation disabled)
+1000012=Enable material optimization function in nesting (part rotation disabled)
+1000013=Part rotating acceptability
+1000014=Acceptability of rotating the part between machining steps
+1000015=Rotation not allowed
+1000016=Rotation not allowed
+1000017=Rotation allowed only if strictly necessary
+1000018=Rotation allowed only if strictly necessary
+1000019=Rotation easily acceptable / no constraint
+1000020=Rotation easily acceptable / no constraint
+1000021=Machining Strategy
+1000022=Machining Strategy
+1000023=Quality and time equally prioritized
+1000024=Quality and time equally prioritized
+1000025=Fastest
+1000026=Prefer fastest strategies
+1000027=High quality
+1000028=Prefer high-quality strategies
+1000029=Ordering rules
+1000030=The first complete strategy in list is the one chosen; no intelligent choosing
+1000031=Max number of reprocessing cycles
+1000032=Max number of reprocessing cycles
+1000033=Use entire blade diameter to shorten path
+1000034=Use entire blade diameter to shorten path
+1000035=Maximum length for dropped waste
+1000036=Maximum length for dropped waste
+1000037=Maximum volume for dropped waste
+1000038=Maximum volume for dropped waste
+1000039=Maximum dice dimension
+1000040=Maximum dice dimension
+1000041=Overmaterial on tenon length
+1000042=Overmaterial on tenon length
+1000043=Overmaterial on tenon width
+1000044=Overmaterial on tenon width
+1000045=Maximum number of milling passes
+1000046=Maximum number of milling passes. If more passes are required, pocketing is performed
+1000047=Use DoveTail tool to pocket
+1000048=Use DoveTail tool to pocket
+1000049=Cutting Strategy
+1000050=Cutting Strategy
+1000051=Automatic
+1000052=Automatic
+1000053=Blade only
+1000054=Blade only
+1000055=Mill only
+1000056=Mill only
+1000057=ChainSaw only
+1000058=ChainSaw only
+1000059=Available mill to machine the tenon cut surface
+1000060=Available mill to machine the tenon cut surface
+1000061=Available mill to machine the dovetail tenon
+1000062=Available mill to machine the dovetail tenon
+1000063=Max radius left on corners
+1000064=Radius-limit left by the tool at each corner of the feature
+1000065=Use Anti-Splint strategy
+1000066=The strategy will apply blade cuts on corner to avoid wood splint
+1000067=Extend after tail
+1000068=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar
+1000069=Minimum approach distance on open sides
+1000070=Minimum approach distance on open sides
+1000071=Available mill to pocket the feature
+1000072=Available mill to pocket the feature
+1000073=Finish with chainsaw if needed
+1000074=Finish with chainsaw if needed
+1000075=Extend after tail
+1000076=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar
+1000077=Force ripping blade
+1000078=Force the use of ripping blade, designed for cuts parallel to the grain
+1000079=Not complete with Blade radius imprint left
+1000080=If the parameter is active, the automatism considers the feature as - not complete - if the blade radius imprint is left
+1000081=Use Zig-Zag ChainSaw
+1000082=Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement.
+1000083=Sort by segment
+1000084=Sort the machinings according to the piece-segment where the machining has inserted
+1000085=Damage next piece
+1000086=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time
+1000087=Never damage
+1000088=Never damage
+1000089=Damage only if raw
+1000090=Damage only if raw
+1000091=Can damage
+1000092=Can damage
+1000093=Use Zig-Zag ChainSaw
+1000094=Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement.
+1000095=Extend after tail
+1000096=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar
+1000097=Damage next piece
+1000098=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time
+1000099=Never damage
+1000100=Never damage
+1000101=Damage only if raw
+1000102=Damage only if raw
+1000103=Can damage
+1000104=Can damage
+1000105=Force ripping blade
+1000106=Force the use of ripping blade, designed for cuts parallel to the grain
+1000107=Extend after tail
+1000108=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar
+1000109=Damage next piece
+1000110=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time
+1000111=Never damage
+1000112=Never damage
+1000113=Damage only if raw
+1000114=Damage only if raw
+1000115=Can damage
+1000116=Can damage
+1000117=Cutting strategy
+1000118=Cutting strategy
+1000119=Automatic
+1000120=Automatic
+1000121=Drop waste
+1000122=Drop waste
+1000123=Keep waste attached
+1000124=Keep waste attached
+1000125=Disable dicing
+1000126=Disable dicing
+1000127=Prioritize machining speed over quality
+1000128=Prioritize machining speed over quality
+1000129=Strip width
+1000130=In case the waste is still kept attached, this is the wigth dimension of the strip
+1000131=Clean blade radius with mill
+1000132=Clean blade radius with mill
+1000133=Milling offset from side
+1000134=Milling offset from side
+1000135=Overmaterial on tenon length
+1000136=Overmaterial on tenon length
+1000137=Overmaterial on tenon width
+1000138=Overmaterial on tenon width
+1000139=Maximum number of milling passes
+1000140=Maximum number of milling passes. If more passes are required, pocketing is performed
+1000141=Cutting Strategy
+1000142=Cutting Strategy
+1000143=Automatic
+1000144=Automatic
+1000145=Blade only
+1000146=Blade only
+1000147=Mill only
+1000148=Mill only
+1000149=ChainSaw only
+1000150=ChainSaw only
+1000151=Available mill to machine the tenon
+1000152=Available mill to machine the tenon
+1000153=Overmaterial on Mortise length
+1000154=Overmaterial on Mortise length
+1000155=Overmaterial on Mortise width
+1000156=Overmaterial on Mortise width
+1000157=Maximum number of milling passes
+1000158=Maximum number of milling passes. If more passes are required, pocketing is performed
+1000159=Use DoveTail tool in case of pocketing
+1000160=Use DoveTail tool in case of pocketing
+1000161=Add Anti-Splint
+1000162=Add Anti-Splint
+1000163=Cutting Strategy
+1000164=Cutting Strategy
+1000165=Automatic
+1000166=Automatic
+1000167=Blade only
+1000168=Blade only
+1000169=Mill only
+1000170=Mill only
+1000171=ChainSaw only
+1000172=ChainSaw only
+1000173=Available mill to machine the mortise cut surface
+1000174=Available mill to machine the mortise cut surface
+1000175=Available mill to machine the dovetail mortise
+1000176=Available mill to machine the dovetail mortise
+1000177=Overmaterial on mortise length
+1000178=Overmaterial on mortise length
+1000179=Overmaterial on mortise width
+1000180=Overmaterial on mortise width
+1000181=Cutting Strategy
+1000182=Cutting Strategy
+1000183=Automatic
+1000184=Automatic
+1000185=Blade only
+1000186=Blade only
+1000187=Mill only
+1000188=Mill only
+1000189=ChainSaw only
+1000190=ChainSaw only
+1000191=Available mill to machine the mortise cut surface
+1000192=Available mill to machine the mortise cut surface
+1000193=Available mill to machine the mortise
+1000194=Available mill to machine the mortise
+1000195=Depth Chamfer
+1000196=Depth of the V-Mill to execute chamfers on cut-edges
+1000197=Use Anti-Splint strategy
+1000198=The strategy will apply blade cuts on corner to avoid wood splint
+1000199=Available mill to machine the profile
+1000200=Available mill to machine the profile
+1000201=Antisplint with blade
+1000202=Use the blade as antisplint in case the geometry is not through
+1000203=Extend after tail
+1000204=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar
+1000205=Clean radius with mill
+1000206=Clean radius with mill
+1000207=Milling offset from side
+1000208=Milling offset from side
+1000209=Damage next piece
+1000210=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time
+1000211=Never damage
+1000212=Never damage
+1000213=Damage only if raw
+1000214=Damage only if raw
+1000215=Can damage
+1000216=Can damage
+1000217=Tolerance on Diameter
+1000218=Tolerance on Diameter
+1000219=Depth PreHole
+1000220=Depth PreHole
+1000221=Drilling Mode
+1000222=Drilling Mode
+1000223=Automatic
+1000224=Automatic
+1000225=Preferred machining from one side only
+1000226=Preferred machining from one side only
+1000227=Force machining from two sides
+1000228=Force machining from two sides
+1000229=Available Drillbit list
+1000230=Available Drillbit list
+1000231=Extend after tail
+1000232=The automatism considers this length as machinable. This means you accept to damage the next piece in the bar
+1000233=Damage next piece
+1000234=This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time
+1000235=Never damage
+1000236=Never damage
+1000237=Damage only if raw
+1000238=Damage only if raw
+1000239=Can damage
+1000240=Can damage
+1000241=Ridge Lap strategy
+1000242=Ridge Lap strategy
+1000243=Automatic
+1000244=Automatic
+1000245=Use blade
+1000246=Use blade
+1000247=Use mill
+1000248=Use mill
+1000249=Tolerance on Diameter
+1000250=Tolerance on Diameter
+1000251=Use mill as a drillbit
+1000252=Admit to use the mill as a drillbit
+1000253=Execute contour only
+1000254=Execute the contour anyway, even the hole is bigger than the tool diameter
+1000255=Drilling mode
+1000256=Drilling mode
+1000257=Automatic
+1000258=Automatic
+1000259=Preferred machining from one side only
+1000260=Preferred machining from one side only
+1000261=Force machining from two sides
+1000262=Force machining from two sides
+1000263=Available mill to machine drills
+1000264=Available mill to machine drills
+1000265=Machining Depth
+1000266=Machining Depth
+1000267=Available mill to machine mark and text
+1000268=Available mill to machine mark and text
+1000269=Marking Strategy
+1000270=Marking Strategy
+1000271=Automatic
+1000272=Automatic
+1000273=Pen only
+1000274=Pen only
+1000275=V-Mill only
+1000276=V-Mill only
+1000277=Depth Chamfer
+1000278=Depth of the V-Mill to execute chamfers on cut-edges
+1000279=Only Chamfer
+1000280=Execute the chamfer only, no other machining
+1000281=Overmaterial
+1000282=Overmaterial
+1000283=Max radius left on corners
+1000284=Radius-limit left by the tool at each corner of the feature
+1000285=Execute cut to remove material
+1000286=Execute cut to remove material
+1000287=Force strip
+1000288=Enable the parameter to force the software to leave a strip to sustain the piece
+1000289=Strip width
+1000290=Width of the strip in case if foreseen from the machining
+1000291=Cutting Strategy
+1000292=Cutting Strategy
+1000293=Automatic
+1000294=Automatic
+1000295=No machining
+1000296=No machining
+1000297=Blade forced
+1000298=Blade forced
+1000299=Mill forced
+1000300=Mill forced
+1000301=Available mill to machine the profile
+1000302=Available mill to machine the profile
+1000303=Depth Chamfer
+1000304=Depth of the V-Mill to execute chamfers on cut-edges
+1000305=Force to use chain saw
+1000306=Force to use chain saw
+1000307=Force to add PreCuts
+1000308=Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length
+1000309=Finish with mill
+1000310=Use a mill to finish the surface if split with chain saw
+1000311=Depth Chamfer
+1000312=Depth of the V-Mill to execute chamfers on cut-edges
+1000313=Force to use chain saw
+1000314=Force to use chain saw
+1000315=Force to add PreCuts
+1000316=Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length
+1000317=Finish with mill
+1000318=Use a mill to finish the surface if split with chain saw
+// ----- End -----
diff --git a/Messages/EgalTechIta.txt b/Messages/EgalTechIta.txt
new file mode 100644
index 0000000..033c206
--- /dev/null
+++ b/Messages/EgalTechIta.txt
@@ -0,0 +1,322 @@
+// File dei messaggi EgalTech Italiano  2026/06/23
+0=ITA
+// ----- BeamNew -----
+1000001=Posizione di caricamento pezzo
+1000002=Posizione di caricamento pezzo
+1000003=Posizione di caricamento da BTL, senza pre-rotazione
+1000004=Posizione di caricamento da BTL, senza pre-rotazione
+1000005=Ottieni la migliore posizione di caricamento tra 0° e 180°
+1000006=Ottieni la migliore posizione di caricamento tra 0° e 180°
+1000007=Ottieni la migliore posizione di caricamento per ogni rotazione del pezzo
+1000008=Ottieni la migliore posizione di caricamento per ogni rotazione del pezzo
+1000009=Consenti inversione pezzo
+1000010=Consenti inversione pezzo
+1000011=Abilita funzione di ottimizzazione materiale nel nesting (rotazione pezzo disabilitata)
+1000012=Abilita funzione di ottimizzazione materiale nel nesting (rotazione pezzo disabilitata)
+1000013=Accettabilità rotazione pezzo
+1000014=Accettabilità della rotazione del pezzo tra le fasi di lavorazione
+1000015=Rotazione non consentita
+1000016=Rotazione non consentita
+1000017=Rotazione consentita solo se strettamente necessaria
+1000018=Rotazione consentita solo se strettamente necessaria
+1000019=Rotazione facilmente accettabile / nessun vincolo
+1000020=Rotazione facilmente accettabile / nessun vincolo
+1000021=Strategia di lavorazione
+1000022=Strategia di lavorazione
+1000023=Qualità e tempo considerati con la stessa priorità
+1000024=Qualità e tempo considerati con la stessa priorità
+1000025=Più veloce
+1000026=Preferisci le strategie più veloci
+1000027=Alta qualità
+1000028=Preferisci le strategie ad alta qualità
+1000029=Regole di ordinamento
+1000030=La prima strategia completa in lista è quella scelta; nessuna scelta intelligente
+1000031=Numero massimo di cicli di rilavorazione
+1000032=Numero massimo di cicli di rilavorazione
+1000033=Usa l'intero diametro della lama per accorciare il percorso
+1000034=Usa l'intero diametro della lama per accorciare il percorso
+1000035=Massima lunghezza per lo scarto caduto
+1000036=Massima lunghezza per lo scarto caduto
+1000037=Massimo volume per lo scarto caduto
+1000038=Massimo volume per lo scarto caduto
+1000039=Dimensione massima dei cubetti
+1000040=Dimensione massima dei cubetti
+1000041=Sovramateriale sulla lunghezza del tenone
+1000042=Sovramateriale sulla lunghezza del tenone
+1000043=Sovramateriale sulla larghezza del tenone
+1000044=Sovramateriale sulla larghezza del tenone
+1000045=Numero massimo di passate di fresatura
+1000046=Numero massimo di passate di fresatura. Se sono necessarie più passate, viene eseguita la svuotatura
+1000047=Utilizza l'utensile a coda di rondine per svuotare
+1000048=Utilizza l'utensile a coda di rondine per svuotare
+1000049=Strategia di taglio
+1000050=Strategia di taglio
+1000051=Automatico
+1000052=Automatico
+1000053=Solo lama
+1000054=Solo lama
+1000055=Solo fresa
+1000056=Solo fresa
+1000057=Solo sega a catena
+1000058=Solo sega a catena
+1000059=Fresa disponibile per lavorare la superficie di taglio del tenone
+1000060=Fresa disponibile per lavorare la superficie di taglio del tenone
+1000061=Fresa disponibile per lavorare il tenone a coda di rondine
+1000062=Fresa disponibile per lavorare il tenone a coda di rondine
+1000063=Raggio massimo rimasto sugli spigoli
+1000064=Limite del raggio lasciato dall'utensile ad ogni spigolo della feature
+1000065=Utilizza la strategia antischeggia
+1000066=La strategia applicherà tagli di lama sullo spigolo per evitare scheggiature del legno
+1000067=Estendi dopo la coda
+1000068=L'automatismo considera questa lunghezza come lavorabile. Questo significa che si accetta di danneggiare il pezzo successivo nella barra
+1000069=Distanza minima di approccio sui lati aperti
+1000070=Distanza minima di approccio sui lati aperti
+1000071=Fresa disponibile per svuotare la feature
+1000072=Fresa disponibile per svuotare la feature
+1000073=Finisci con sega a catena se necessario
+1000074=Finisci con sega a catena se necessario
+1000075=Estendi dopo la coda
+1000076=L'automatismo considera questa lunghezza come lavorabile. Questo significa che si accetta di danneggiare il pezzo successivo nella barra
+1000077=Forza lama da scasso
+1000078=Forza l'uso della lama da scasso, progettata per tagli paralleli alla venatura
+1000079=Non completare se rimane l'impronta del raggio della lama
+1000080=Se il parametro è attivo, l'automatismo considera la feature come - non completa - se rimane l'impronta del raggio della lama
+1000081=Utilizza sega a catena in Zig-Zag
+1000082=Abilita il parametro per impostare il movimento Zig-Zag sulla lavorazione della sega a catena. Disattivarlo per utilizzare il movimento One-Way.
+1000083=Ordina per segmento
+1000084=Ordina le lavorazioni in base al segmento del pezzo in cui la lavorazione è inserita
+1000085=Danneggia il pezzo successivo
+1000086=Questa opzione consente di decidere come considerare il pezzo successivo nella barra. Il software calcola specifici ingressi/uscite per rispettare il parametro. Questo parametro può variare il tempo di lavorazione
+1000087=Non danneggiare mai
+1000088=Non danneggiare mai
+1000089=Danneggia solo se grezzo
+1000090=Danneggia solo se grezzo
+1000091=Può danneggiare
+1000092=Può danneggiare
+1000093=Utilizza sega a catena in Zig-Zag
+1000094=Abilita il parametro per impostare il movimento Zig-Zag sulla lavorazione della sega a catena. Disattivarlo per utilizzare il movimento One-Way.
+1000095=Estendi dopo la coda
+1000096=L'automatismo considera questa lunghezza come lavorabile. Questo significa che si accetta di danneggiare il pezzo successivo nella barra
+1000097=Danneggia il pezzo successivo
+1000098=Questa opzione consente di decidere come considerare il pezzo successivo nella barra. Il software calcola specifici ingressi/uscite per rispettare il parametro. Questo parametro può variare il tempo di lavorazione
+1000099=Non danneggiare mai
+1000100=Non danneggiare mai
+1000101=Danneggia solo se grezzo
+1000102=Danneggia solo se grezzo
+1000103=Può danneggiare
+1000104=Può danneggiare
+1000105=Forza lama da scasso
+1000106=Forza l'uso della lama da scasso, progettata per tagli paralleli alla venatura
+1000107=Estendi dopo la coda
+1000108=L'automatismo considera questa lunghezza come lavorabile. Questo significa che si accetta di danneggiare il pezzo successivo nella barra
+1000109=Danneggia il pezzo successivo
+1000110=Questa opzione consente di decidere come considerare il pezzo successivo nella barra. Il software calcola specifici ingressi/uscite per rispettare il parametro. Questo parametro può variare il tempo di lavorazione
+1000111=Non danneggiare mai
+1000112=Non danneggiare mai
+1000113=Danneggia solo se grezzo
+1000114=Danneggia solo se grezzo
+1000115=Può danneggiare
+1000116=Può danneggiare
+1000117=Strategia di taglio
+1000118=Strategia di taglio
+1000119=Automatico
+1000120=Automatico
+1000121=Scarica lo scarto
+1000122=Scarica lo scarto
+1000123=Mantieni lo scarto attaccato
+1000124=Mantieni lo scarto attaccato
+1000125=Disabilita la tassellatura
+1000126=Disabilita la tassellatura
+1000127=Dai priorità alla velocità di lavorazione rispetto alla qualità
+1000128=Dai priorità alla velocità di lavorazione rispetto alla qualità
+1000129=Larghezza del testimone
+1000130=Nel caso in cui lo scarto venga mantenuto attaccato, questa è la dimensione della larghezza del testimone
+1000131=Pulisci il raggio della lama con la fresa
+1000132=Pulisci il raggio della lama con la fresa
+1000133=Offset di fresatura dal lato
+1000134=Offset di fresatura dal lato
+1000135=Sovramateriale sulla lunghezza del tenone
+1000136=Sovramateriale sulla lunghezza del tenone
+1000137=Sovramateriale sulla larghezza del tenone
+1000138=Sovramateriale sulla larghezza del tenone
+1000139=Numero massimo di passate di fresatura
+1000140=Numero massimo di passate di fresatura. Se sono necessarie più passate, viene eseguita la svuotatura
+1000141=Strategia di taglio
+1000142=Strategia di taglio
+1000143=Automatico
+1000144=Automatico
+1000145=Solo lama
+1000146=Solo lama
+1000147=Solo fresa
+1000148=Solo fresa
+1000149=Solo sega a catena
+1000150=Solo sega a catena
+1000151=Fresa disponibile per lavorare il tenone
+1000152=Fresa disponibile per lavorare il tenone
+1000153=Sovramateriale sulla lunghezza della mortasa
+1000154=Sovramateriale sulla lunghezza della mortasa
+1000155=Sovramateriale sulla larghezza della mortasa
+1000156=Sovramateriale sulla larghezza della mortasa
+1000157=Numero massimo di passate di fresatura
+1000158=Numero massimo di passate di fresatura. Se sono necessarie più passate, viene eseguita la svuotatura
+1000159=Utilizza l'utensile a coda di rondine in caso di svuotatura
+1000160=Utilizza l'utensile a coda di rondine in caso di svuotatura
+1000161=Aggiungi antischeggia
+1000162=Aggiungi antischeggia
+1000163=Strategia di taglio
+1000164=Strategia di taglio
+1000165=Automatico
+1000166=Automatico
+1000167=Solo lama
+1000168=Solo lama
+1000169=Solo fresa
+1000170=Solo fresa
+1000171=Solo sega a catena
+1000172=Solo sega a catena
+1000173=Fresa disponibile per lavorare la superficie di taglio della mortasa
+1000174=Fresa disponibile per lavorare la superficie di taglio della mortasa
+1000175=Fresa disponibile per lavorare la mortasa a coda di rondine
+1000176=Fresa disponibile per lavorare la mortasa a coda di rondine
+1000177=Sovramateriale sulla lunghezza della mortasa
+1000178=Sovramateriale sulla lunghezza della mortasa
+1000179=Sovramateriale sulla larghezza della mortasa
+1000180=Sovramateriale sulla larghezza della mortasa
+1000181=Strategia di taglio
+1000182=Strategia di taglio
+1000183=Automatico
+1000184=Automatico
+1000185=Solo lama
+1000186=Solo lama
+1000187=Solo fresa
+1000188=Solo fresa
+1000189=Solo sega a catena
+1000190=Solo sega a catena
+1000191=Fresa disponibile per lavorare la superficie di taglio della mortasa
+1000192=Fresa disponibile per lavorare la superficie di taglio della mortasa
+1000193=Fresa disponibile per lavorare la mortasa
+1000194=Fresa disponibile per lavorare la mortasa
+1000195=Profondità dello smusso
+1000196=Profondità della fresa a V per eseguire smussi sugli spigoli di taglio
+1000197=Utilizza la strategia antischeggia
+1000198=La strategia applicherà tagli di lama sullo spigolo per evitare scheggiature del legno
+1000199=Fresa disponibile per lavorare il profilo
+1000200=Fresa disponibile per lavorare il profilo
+1000201=Antischeggia con lama
+1000202=Utilizza la lama come antischeggia nel caso in cui la geometria non sia passante
+1000203=Estendi dopo la coda
+1000204=L'automatismo considera questa lunghezza come lavorabile. Questo significa che si accetta di danneggiare il pezzo successivo nella barra
+1000205=Pulisci il raggio con la fresa
+1000206=Pulisci il raggio con la fresa
+1000207=Offset di fresatura dal lato
+1000208=Offset di fresatura dal lato
+1000209=Danneggia il pezzo successivo
+1000210=Questa opzione consente di decidere come considerare il pezzo successivo nella barra. Il software calcola specifici ingressi/uscite per rispettare il parametro. Questo parametro può variare il tempo di lavorazione
+1000211=Non danneggiare mai
+1000212=Non danneggiare mai
+1000213=Danneggia solo se grezzo
+1000214=Danneggia solo se grezzo
+1000215=Può danneggiare
+1000216=Può danneggiare
+1000217=Tolleranza sul diametro
+1000218=Tolleranza sul diametro
+1000219=Profondità del preforo
+1000220=Profondità del preforo
+1000221=Modalità di foratura
+1000222=Modalità di foratura
+1000223=Automatico
+1000224=Automatico
+1000225=Lavorazione preferita da un solo lato
+1000226=Lavorazione preferita da un solo lato
+1000227=Forza la lavorazione da due lati
+1000228=Forza la lavorazione da due lati
+1000229=Lista delle punte disponibili
+1000230=Lista delle punte disponibili
+1000231=Estendi dopo la coda
+1000232=L'automatismo considera questa lunghezza come lavorabile. Questo significa che si accetta di danneggiare il pezzo successivo nella barra
+1000233=Danneggia il pezzo successivo
+1000234=Questa opzione consente di decidere come considerare il pezzo successivo nella barra. Il software calcola specifici ingressi/uscite per rispettare il parametro. Questo parametro può variare il tempo di lavorazione
+1000235=Non danneggiare mai
+1000236=Non danneggiare mai
+1000237=Danneggia solo se grezzo
+1000238=Danneggia solo se grezzo
+1000239=Può danneggiare
+1000240=Può danneggiare
+1000241=Strategia del mezzolegno di colmo
+1000242=Strategia del mezzolegno di colmo
+1000243=Automatico
+1000244=Automatico
+1000245=Utilizza la lama
+1000246=Utilizza la lama
+1000247=Utilizza la fresa
+1000248=Utilizza la fresa
+1000249=Tolleranza sul diametro
+1000250=Tolleranza sul diametro
+1000251=Utilizza la fresa come una punta
+1000252=Ammetti l'uso della fresa come una punta da foratura
+1000253=Esegui solo il contorno
+1000254=Esegui comunque il contorno, anche se il foro è più grande del diametro dell'utensile
+1000255=Modalità di foratura
+1000256=Modalità di foratura
+1000257=Automatico
+1000258=Automatico
+1000259=Lavorazione preferita da un solo lato
+1000260=Lavorazione preferita da un solo lato
+1000261=Forza la lavorazione da due lati
+1000262=Forza la lavorazione da due lati
+1000263=Fresa disponibile per lavorare i fori
+1000264=Fresa disponibile per lavorare i fori
+1000265=Profondità di lavorazione
+1000266=Profondità di lavorazione
+1000267=Fresa disponibile per lavorare marcature e testi
+1000268=Fresa disponibile per lavorare marcature e testi
+1000269=Strategia di marcatura
+1000270=Strategia di marcatura
+1000271=Automatico
+1000272=Automatico
+1000273=Solo penna
+1000274=Solo penna
+1000275=Solo fresa a V
+1000276=Solo fresa a V
+1000277=Profondità dello smusso
+1000278=Profondità della fresa a V per eseguire smussi sugli spigoli di taglio
+1000279=Solo smusso
+1000280=Esegui solo lo smusso, nessuna altra lavorazione
+1000281=Sovramateriale
+1000282=Sovramateriale
+1000283=Raggio massimo rimasto sugli spigoli
+1000284=Limite del raggio lasciato dall'utensile ad ogni spigolo della feature
+1000285=Esegui il taglio per rimuovere materiale
+1000286=Esegui il taglio per rimuovere materiale
+1000287=Forza il testimone
+1000288=Abilita il parametro per forzare il software a lasciare un testimone per sostenere il pezzo
+1000289=Larghezza del testimone
+1000290=Larghezza del testimone nel caso in cui sia previsto dalla lavorazione
+1000291=Strategia di taglio
+1000292=Strategia di taglio
+1000293=Automatico
+1000294=Automatico
+1000295=Nessuna lavorazione
+1000296=Nessuna lavorazione
+1000297=Forza lama
+1000298=Forza lama
+1000299=Forza fresa
+1000300=Forza fresa
+1000301=Fresa disponibile per lavorare il profilo
+1000302=Fresa disponibile per lavorare il profilo
+1000303=Profondità dello smusso
+1000304=Profondità della fresa a V per eseguire smussi sugli spigoli di taglio
+1000305=Forza l'uso della sega a catena
+1000306=Forza l'uso della sega a catena
+1000307=Forza l'aggiunta di pretagli
+1000308=Autocam applicherà una lavorazione sullo zero teorico per evitare collisioni se la lunghezza teorica del pezzo non corrisponde alla lunghezza reale
+1000309=Finisci con la fresa
+1000310=Utilizza una fresa per rifinire la superficie se tagliata con la sega a catena
+1000311=Profondità dello smusso
+1000312=Profondità della fresa a V per eseguire smussi sugli spigoli di taglio
+1000313=Forza l'uso della sega a catena
+1000314=Forza l'uso della sega a catena
+1000315=Forza l'aggiunta di pretagli
+1000316=Autocam applicherà una lavorazione sullo zero teorico per evitare collisioni se la lunghezza teorica del pezzo non corrisponde alla lunghezza reale
+1000317=Finisci con la fresa
+1000318=Utilizza una fresa per rifinire la superficie se tagliata con la sega a catena
+// ----- End -----
diff --git a/Messages/EgalTechNld.txt b/Messages/EgalTechNld.txt
new file mode 100644
index 0000000..864071e
--- /dev/null
+++ b/Messages/EgalTechNld.txt
@@ -0,0 +1,322 @@
+// Message File EgalTech Dutch  2026/06/23
+0=NLD
+// ----- BeamNew -----
+1000001=Ladevolgorde van het onderdeel
+1000002=Ladevolgorde van het onderdeel
+1000003=Laadpositie vanaf BTL, geen voorrotatie
+1000004=Laadpositie vanaf BTL, geen voorrotatie
+1000005=Bepaal de beste laadpositie uit 0° en 180°
+1000006=Bepaal de beste laadpositie uit 0° en 180°
+1000007=Bepaal de beste laadpositie bij elke rotatie van het onderdeel
+1000008=Bepaal de beste laadpositie bij elke rotatie van het onderdeel
+1000009=Omkeren van het onderdeel toestaan
+1000010=Omkeren van het onderdeel toestaan
+1000011=Materiaaloptimalisatie in nesting inschakelen (rotatie van onderdeel uitgeschakeld)
+1000012=Materiaaloptimalisatie in nesting inschakelen (rotatie van onderdeel uitgeschakeld)
+1000013=Acceptatie van rotatie van het onderdeel
+1000014=Acceptatie van het roteren van het onderdeel tussen bewerkingsstappen
+1000015=Rotatie niet toegestaan
+1000016=Rotatie niet toegestaan
+1000017=Rotatie alleen toegestaan indien strikt noodzakelijk
+1000018=Rotatie alleen toegestaan indien strikt noodzakelijk
+1000019=Rotatie eenvoudig acceptabel / geen beperking
+1000020=Rotatie eenvoudig acceptabel / geen beperking
+1000021=Bewerkingsstrategie
+1000022=Bewerkingsstrategie
+1000023=Kwaliteit en tijd hebben gelijke prioriteit
+1000024=Kwaliteit en tijd hebben gelijke prioriteit
+1000025=Snelste
+1000026=Voorkeur geven aan de snelste strategieën
+1000027=Hoge kwaliteit
+1000028=Voorkeur geven aan hoogwaardige strategieën
+1000029=Ordeningsregels
+1000030=De eerste complete strategie in de lijst wordt gekozen; geen intelligente selectie
+1000031=Max. aantal herbewerkingscycli
+1000032=Max. aantal herbewerkingscycli
+1000033=Gebruik de volledige bladdiameter om het pad te verkorten
+1000034=Gebruik de volledige bladdiameter om het pad te verkorten
+1000035=Maximale lengte voor vallend afval
+1000036=Maximale lengte voor vallend afval
+1000037=Maximaal volume voor vallend afval
+1000038=Maximaal volume voor vallend afval
+1000039=Maximale afmeting van de blokjes
+1000040=Maximale afmeting van de blokjes
+1000041=Overmaat op de penlengte
+1000042=Overmaat op de penlengte
+1000043=Overmaat op de penbreedte
+1000044=Overmaat op de penbreedte
+1000045=Maximaal aantal freesgangen
+1000046=Maximaal aantal freesgangen. Als er meer gangen vereist zijn, wordt er uitkameren/uitfrezen uitgevoerd
+1000047=Zwaluwstaartgereedschap gebruiken voor uitfrezen
+1000048=Zwaluwstaartgereedschap gebruiken voor uitfrezen
+1000049=Snijstrategie
+1000050=Snijstrategie
+1000051=Automatisch
+1000052=Automatisch
+1000053=Alleen zaagblad
+1000054=Alleen zaagblad
+1000055=Alleen frees
+1000056=Alleen frees
+1000057=Alleen kettingzaag
+1000058=Alleen kettingzaag
+1000059=Beschikbare frees om het snijvlak van de pen te bewerken
+1000060=Beschikbare frees om het snijvlak van the pen te bewerken
+1000061=Beschikbare frees om de zwaluwstaartpen te bewerken
+1000062=Beschikbare frees om de zwaluwstaartpen te bewerken
+1000063=Maximale hoekradius achtergelaten op hoeken
+1000064=Radiuslimiet achtergelaten door het gereedschap bij elke binnenhoek van de feature
+1000065=Anti-splinterstrategie gebruiken
+1000066=De strategie past zaagsneden toe op de hoek om houtsplinters te voorkomen
+1000067=Verlengen na de staart
+1000068=Het automatisme beschouwt deze lengte als bewerkbaar. Dit betekent dat u accepteert dat het volgende onderdeel in de balk beschadigd kan raken
+1000069=Minimale benaderingsafstand op open zijden
+1000070=Minimale benaderingsafstand op open zijden
+1000071=Beschikbare frees voor het uitdiepen/uitfrezen van de feature
+1000072=Beschikbare frees voor het uitdiepen/uitfrezen van de feature
+1000073=Afwerken met kettingzaag indien nodig
+1000074=Afwerken met kettingzaag indien nodig
+1000075=Verlengen na de staart
+1000076=Het automatisme beschouwt deze lengte als bewerkbaar. Dit betekent dat u accepteert dat het volgende onderdeel in de balk beschadigd kan raken
+1000077=Schulpzaagblad forceren
+1000078=Forceer het gebruik van een schulpzaagblad, ontworpen voor zaagsneden parallel aan de houtnerf
+1000079=Niet voltooien als de uitloopradius van het zaagblad achterblijft
+1000080=Als de parameter actief is, beschouwt het automatisme de feature als - niet voltooid - als de uitloopradius van het zaagblad achterblijft
+1000081=Kettingzaag in zig-zag-modus gebruiken
+1000082=Schakel deze parameter in om de zig-zag-beweging voor de kettingzaagbewerking in te stellen. Deactiveer deze om de one-way-beweging te gebruiken.
+1000083=Sorteren per segment
+1000084=Sorteer de bewerkingen op basis van het onderdeelsegment waarin de bewerking is ingevoegd
+1000085=Volgend onderdeel beschadigen
+1000086=Met deze optie kunt u beslissen hoe u het volgende onderdeel in de balk beschouwt. De software berekent specifieke in- en uitlopen om de parameter te respecteren. Deze parameter kan de bewerkingstijd beïnvloeden
+1000087=Nooit beschadigen
+1000088=Nooit beschadigen
+1000089=Alleen beschadigen als het onbewerkt hout betreft
+1000090=Alleen beschadigen als het onbewerkt hout betreft
+1000091=Mag beschadigen
+1000092=Mag beschadigen
+1000093=Kettingzaag in zig-zag-modus gebruiken
+1000094=Schakel deze parameter in om de zig-zag-beweging voor de kettingzaagbewerking in te stellen. Deactiveer deze om de one-way-beweging te gebruiken.
+1000095=Verlengen na de staart
+1000096=Het automatisme beschouwt deze lengte als bewerkbaar. Dit betekent dat u accepteert dat het volgende onderdeel in de balk beschadigd kan raken
+1000097=Volgend onderdeel beschadigen
+1000098=Met deze optie kunt u beslissen hoe u het volgende onderdeel in de balk beschouwt. De software berekent specifieke in- en uitlopen om de parameter te respecteren. Deze parameter kan de bewerkingstijd beïnvloeden
+1000099=Nooit beschadigen
+1000100=Nooit beschadigen
+1000101=Alleen beschadigen als het onbewerkt hout betreft
+1000102=Alleen beschadigen als het onbewerkt hout betreft
+1000103=Mag beschadigen
+1000104=Mag beschadigen
+1000105=Schulpzaagblad forceren
+1000106=Forceer het gebruik van een schulpzaagblad, ontworpen voor zaagsneden parallel aan de houtnerf
+1000107=Verlengen na de staart
+1000108=Het automatisme beschouwt deze lengte als bewerkbaar. Dit betekent dat u accepteert dat het volgende onderdeel in de balk beschadigd kan raken
+1000109=Volgend onderdeel beschadigen
+1000110=Met deze optie kunt u beslissen hoe u het volgende onderdeel in de balk beschouwt. De software berekent specifieke in- en uitlopen om de parameter te respecteren. Deze parameter kan de bewerkingstijd beïnvloeden
+1000111=Nooit beschadigen
+1000112=Nooit beschadigen
+1000113=Alleen beschadigen als het onbewerkt hout betreft
+1000114=Alleen beschadigen als het onbewerkt hout betreft
+1000115=Mag beschadigen
+1000116=Mag beschadigen
+1000117=Zaagstrategie
+1000118=Zaagstrategie
+1000119=Automatisch
+1000120=Automatisch
+1000121=Kortafval afvoeren
+1000122=Kortafval afvoeren
+1000123=Kortafval verbonden houden
+1000124=Kortafval verbonden houden
+1000125=Opdelen in blokjes uitschakelen
+1000126=Opdelen in blokjes uitschakelen
+1000127=Prioriteit geven aan bewerkingssnelheid boven kwaliteit
+1000128=Prioriteit geven aan bewerkingssnelheid boven kwaliteit
+1000129=Breedte van de verbindingsstrip
+1000130=In het geval dat het afval vastgehecht blijft, is dit de breedteafmeting van de verbindingsstrip
+1000131=Uitloopradius van zaagblad reinigen met frees
+1000132=Uitloopradius van zaagblad reinigen met frees
+1000133=Freesoffset vanaf de zijde
+1000134=Freesoffset vanaf de zijde
+1000135=Overmaat op de penlengte
+1000136=Overmaat op de penlengte
+1000137=Overmaat op de penbreedte
+1000138=Overmaat op de penbreedte
+1000139=Maximum aantal freesgangen
+1000140=Maximum aantal freesgangen. Als er meer gangen vereist zijn, wordt er uitfrezen/uitkameren uitgevoerd
+1000141=Snijstrategie
+1000142=Snijstrategie
+1000143=Automatisch
+1000144=Automatisch
+1000145=Alleen zaagblad
+1000146=Alleen zaagblad
+1000147=Alleen frees
+1000148=Alleen frees
+1000149=Alleen kettingzaag
+1000150=Alleen kettingzaag
+1000151=Beschikbare frees om de pen te bewerken
+1000152=Beschikbare frees om de pen te bewerken
+1000153=Overmaat op de gatlengte
+1000154=Overmaat op de gatlengte
+1000155=Overmaat op de gatbreedte
+1000156=Overmaat op de gatbreedte
+1000157=Maximum aantal freesgangen
+1000158=Maximum aantal freesgangen. Als er meer gangen vereist zijn, wordt er uitfrezen/uitkameren uitgevoerd
+1000159=Zwaluwstaartgereedschap gebruiken bij uitfrezen
+1000160=Zwaluwstaartgereedschap gebruiken bij uitfrezen
+1000161=Anti-splintertoevoeging toepassen
+1000162=Anti-splintertoevoeging toepassen
+1000163=Snijstrategie
+1000164=Snijstrategie
+1000165=Automatisch
+1000166=Automatisch
+1000167=Alleen zaagblad
+1000168=Alleen zaagblad
+1000169=Alleen frees
+1000170=Alleen frees
+1000171=Alleen kettingzaag
+1000172=Alleen kettingzaag
+1000173=Beschikbare frees om het snijvlak van het gat te bewerken
+1000174=Beschikbare frees om het snijvlak van het gat te bewerken
+1000175=Beschikbare frees om het zwaluwstaartgat te frezen
+1000176=Beschikbare frees om het zwaluwstaartgat te frezen
+1000177=Overmaat op de gatlengte
+1000178=Overmaat op de gatlengte
+1000179=Overmaat op de gatbreedte
+1000180=Overmaat op de gatbreedte
+1000181=Snijstrategie
+1000182=Snijstrategie
+1000183=Automatisch
+1000184=Automatisch
+1000185=Alleen zaagblad
+1000186=Alleen zaagblad
+1000187=Alleen frees
+1000188=Alleen frees
+1000189=Alleen kettingzaag
+1000190=Alleen kettingzaag
+1000191=Beschikbare frees om het snijvlak van het gat te bewerken
+1000192=Beschikbare frees om het snijvlak van het gat te bewerken
+1000193=Beschikbare frees om het gat te frezen
+1000194=Beschikbare frees om het gat te frezen
+1000195=Diepte van de afschuining
+1000196=Diepte van de V-frees om afschuiningen op snijkanten uit te voeren
+1000197=Anti-splinterstrategie gebruiken
+1000198=De strategie past zaagsneden toe op de hoek om houtsplinters te voorkomen
+1000199=Beschikbare frees om het profiel te bewerken
+1000200=Beschikbare frees om het profiel te bewerken
+1000201=Anti-splinterfunctie via zaagblad
+1000202=Gebruik het zaagblad als anti-splintervoorziening indien de geometrie niet doorgaand is
+1000203=Verlengen na de staart
+1000204=Het automatisme beschouwt deze lengte als bewerkbaar. Dit betekent dat u accepteert dat het volgende onderdeel in de balk beschadigd kan raken
+1000205=Uitloopradius reinigen met frees
+1000206=Uitloopradius reinigen met frees
+1000207=Freesoffset vanaf de zijde
+1000208=Freesoffset vanaf de zijde
+1000209=Volgend onderdeel beschadigen
+1000210=Met deze optie kunt u beslissen hoe u het volgende onderdeel in de balk beschouwt. De software berekent specifieke in- en uitlopen om de parameter te respecteren. Deze parameter kan de bewerkingstijd beïnvloeden
+1000211=Nooit beschadigen
+1000212=Nooit beschadigen
+1000213=Alleen beschadigen als het onbewerkt hout betreft
+1000214=Alleen beschadigen als het onbewerkt hout betreft
+1000215=Mag beschadigen
+1000216=Mag beschadigen
+1000217=Tolerantie op diameter
+1000218=Tolerantie op diameter
+1000219=Diepte van het voorgat
+1000220=Diepte van het voorgat
+1000221=Boormodus
+1000222=Boormodus
+1000223=Automatisch
+1000224=Automatisch
+1000225=Voorkeursbewerking vanaf slechts één zijde
+1000226=Voorkeursbewerking vanaf slechts één zijde
+1000227=Bewerking vanaf beide zijden forceren
+1000228=Bewerking vanaf beide zijden forceren
+1000229=Lijst met beschikbare boren
+1000230=Lijst met beschikbare boren
+1000231=Verlengen na de staart
+1000232=Het automatisme beschouwt deze lengte als bewerkbaar. Dit betekent dat u accepteert dat het volgende onderdeel in de balk beschadigd kan raken
+1000233=Volgend onderdeel beschadigen
+1000234=Met deze optie kunt u beslissen hoe u het volgende onderdeel in de balk beschouwt. De software berekent specifieke in- en uitlopen om de parameter te respecteren. Deze parameter kan de bewerkingstijd beïnvloeden
+1000235=Nooit beschadigen
+1000236=Nooit beschadigen
+1000237=Alleen beschadigen als het onbewerkt hout betreft
+1000238=Alleen beschadigen als het onbewerkt hout betreft
+1000239=Mag beschadigen
+1000240=Mag beschadigen
+1000241=Borstverjonging zaag- en freesstrategie
+1000242=Borstverjonging zaag- en freesstrategie
+1000243=Automatisch
+1000244=Automatisch
+1000245=Zaagblad gebruiken
+1000246=Zaagblad gebruiken
+1000247=Frees gebruiken
+1000248=Frees gebruiken
+1000249=Tolerantie op diameter
+1000250=Tolerantie op diameter
+1000251=Frees gebruiken als boor
+1000252=Toestaan dat de frees axiaal als boor wordt ingezet
+1000253=Alleen contour frezen
+1000254=Contour sowieso frezen, zelfs wanneer het gat groter is dan de gereedschapsdiameter
+1000255=Boormodus via frezen
+1000256=Boormodus via frezen
+1000257=Automatisch
+1000258=Automatisch
+1000259=Voorkeursbewerking vanaf slechts één zijde
+1000260=Voorkeursbewerking vanaf slechts één zijde
+1000261=Bewerking vanaf beide zijden forceren
+1000262=Bewerking vanaf beide zijden forceren
+1000263=Beschikbare frezen om gaten te bewerken
+1000264=Beschikbare frezen om gaten te bewerken
+1000265=Bewerkingsdiepte
+1000266=Bewerkingsdiepte
+1000267=Beschikbare frees voor markeringen en tekst
+1000268=Beschikbare frees voor markeringen en tekst
+1000269=Markeerstrategie
+1000270=Markeerstrategie
+1000271=Automatisch
+1000272=Automatisch
+1000273=Alleen markeerpen
+1000274=Alleen markeerpen
+1000275=Alleen V-frees
+1000276=Alleen V-frees
+1000277=Diepte van de afschuining
+1000278=Diepte van de V-frees om afschuiningen op snijkanten uit te voeren
+1000279=Alleen afschuining frezen
+1000280=Alleen de afschuining uitvoeren, geen andere bewerkingen
+1000281=Overmaat
+1000282=Overmaat
+1000283=Maximale hoekradius achtergelaten op hoeken
+1000284=Radiuslimiet achtergelaten door het gereedschap bij elke binnenhoek van de feature
+1000285=Zaagsnede uitvoeren om materiaal te verwijderen
+1000286=Zaagsnede uitvoeren om materiaal te verwijderen
+1000287=Snoei- / steunstrip forceren
+1000288=Activeer deze parameter om de software te verplichten een reststrip te laten staan om het onderdeel te ondersteunen
+1000289=Breedte van de steunstrip
+1000290=Breedte van de strip in het geval dat deze door de bewerking is voorzien
+1000291=Kopsnijstrategie
+1000292=Kopsnijstrategie
+1000293=Automatisch
+1000294=Automatisch
+1000295=Geen bewerking
+1000296=Geen bewerking
+1000297=Zaagblad geforceerd
+1000298=Zaagblad geforceerd
+1000299=Frees geforceerd
+1000300=Frees geforceerd
+1000301=Beschikbare frees om het kops profiel te bewerken
+1000302=Beschikbare frees om het kops profiel te bewerken
+1000303=Diepte van de afschuining
+1000304=Diepte van de V-frees om afschuiningen op snijkanten uit te voeren
+1000305=Gebruik van kettingzaag forceren
+1000306=Gebruik van kettingzaag forceren
+1000307=PreCuts (Voorsneden) forceren
+1000308=Autocam past een bewerking toe op het theoretische nulpunt om botsingen te voorkomen als de theoretische lengte niet overeenkomt met de werkelijke lengte
+1000309=Afwerken met frees
+1000310=Gebruik een frees om het oppervlak na te bewerken als dit met de kettingzaag is gespleten
+1000311=Diepte van de afschuining
+1000312=Diepte van de V-frees om afschuiningen op snijkanten uit te voeren
+1000313=Gebruik van kettingzaag forceren
+1000314=Gebruik van kettingzaag forceren
+1000315=PreCuts (Voorsneden) forceren
+1000316=Autocam past een bewerking toe op het theoretische nulpunt om botsingen te voorkomen als de theoretische lengte niet overeenkomt met de werkelijke lengte
+1000317=Afwerken met frees
+1000318=Gebruik een frees om het oppervlak na te bewerken als dit met de kettingzaag is gespleten
+// ----- End -----
\ No newline at end of file
diff --git a/Strategies/GeneralParameters.json b/Strategies/GeneralParameters.json
index 30568da..0af1506 100644
--- a/Strategies/GeneralParameters.json
+++ b/Strategies/GeneralParameters.json
@@ -1,4 +1,3 @@
-
 [
    {
       "nGroup": "PIECE LOADING",
@@ -7,6 +6,8 @@
       "sValue": "BTL_POSITION",
       "sDescriptionShort": "Part loading position",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000001,
+      "idDescriptionLongMsg": 1000002,
       "sType": "combo",
       "sMinUserLevel": "1",
       "Choices": [
@@ -14,18 +15,24 @@
             "sValue": "BTL_POSITION",
             "sDescriptionShort": "Loading position from BTL, no pre-rotation",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000003,
+            "idDescriptionLongMsg": 1000004,
             "sMessageId": ""
          },
          {
             "sValue": "STD_PRE_ROTATION",
             "sDescriptionShort": "Get Best loading position from 0° and 180°",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000005,
+            "idDescriptionLongMsg": 1000006,
             "sMessageId": ""
          },
          {
             "sValue": "FULL_PRE_ROTATION",
             "sDescriptionShort": "Get Best loading position in each piece rotation",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000007,
+            "idDescriptionLongMsg": 1000008,
             "sMessageId": ""
          }
       ]
@@ -37,6 +44,8 @@
       "sValue": "false",
       "sDescriptionShort": "Allow piece inversion",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000009,
+      "idDescriptionLongMsg": 1000010,
       "sType": "b",
       "sMessageId": " ",
       "sMinUserLevel": "1"
@@ -48,6 +57,8 @@
       "sValue": "false",
       "sDescriptionShort": "Enable material optimization function in nesting (part rotation disabled)",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000011,
+      "idDescriptionLongMsg": 1000012,
       "sType": "b",
       "sMessageId": " ",
       "sMinUserLevel": "1"
@@ -59,6 +70,8 @@
       "sValue": "IF_NECESSARY",
       "sDescriptionShort": "Part rotating acceptability",
       "sDescriptionLong": "Acceptability of rotating the part between machining steps",
+      "idDescriptionShortMsg": 1000013,
+      "idDescriptionLongMsg": 1000014,
       "sType": "combo",
       "sMinUserLevel": "1",
       "Choices": [
@@ -66,18 +79,24 @@
             "sValue": "NOT_ALLOWED",
             "sDescriptionShort": "Rotation not allowed",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000015,
+            "idDescriptionLongMsg": 1000016,
             "sMessageId": ""
          },
          {
             "sValue": "IF_NECESSARY",
             "sDescriptionShort": "Rotation allowed only if strictly necessary",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000017,
+            "idDescriptionLongMsg": 1000018,
             "sMessageId": ""
          },
          {
             "sValue": "NO_CONSTRAINT",
             "sDescriptionShort": "Rotation easily acceptable / no constraint",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000019,
+            "idDescriptionLongMsg": 1000020,
             "sMessageId": ""
          }
       ]
@@ -89,6 +108,8 @@
       "sValue": "AUTO",
       "sDescriptionShort": "Machining Strategy",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000021,
+      "idDescriptionLongMsg": 1000022,
       "sType": "combo",
       "sMinUserLevel": "1",
       "Choices": [
@@ -96,24 +117,32 @@
             "sValue": "AUTO",
             "sDescriptionShort": "Quality and time equally prioritized",
             "sDescriptionLong": "",
+            "idDescriptionShortMsg": 1000023,
+            "idDescriptionLongMsg": 1000024,
             "sMessageId": ""
          },
          {
             "sValue": "FASTEST",
             "sDescriptionShort": "Fastest",
             "sDescriptionLong": "Prefer fastest strategies",
+            "idDescriptionShortMsg": 1000025,
+            "idDescriptionLongMsg": 1000026,
             "sMessageId": ""
          },
          {
             "sValue": "HIGH_QUALITY",
             "sDescriptionShort": "High quality",
             "sDescriptionLong": "Prefer high-quality strategies",
+            "idDescriptionShortMsg": 1000027,
+            "idDescriptionLongMsg": 1000028,
             "sMessageId": ""
          },
          {
             "sValue": "FIRST_IN_LIST",
             "sDescriptionShort": "Ordering rules",
             "sDescriptionLong": "The first complete strategy in list is the one chosen; no intelligent choosing",
+            "idDescriptionShortMsg": 1000029,
+            "idDescriptionLongMsg": 1000030,
             "sMessageId": ""
          }
       ]
@@ -125,6 +154,8 @@
       "sValue": "1",
       "sDescriptionShort": "Max number of reprocessing cycles",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000031,
+      "idDescriptionLongMsg": 1000032,
       "sType": "d",
       "sMessageId": " ",
       "sMinUserLevel": "10"
@@ -136,6 +167,8 @@
       "sValue": "true",
       "sDescriptionShort": "Use entire blade diameter to shorten path",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000033,
+      "idDescriptionLongMsg": 1000034,
       "sType": "b",
       "sMessageId": " ",
       "sMinUserLevel": "5"
@@ -147,6 +180,8 @@
       "sValue": "300",
       "sDescriptionShort": "Maximum length for dropped waste",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000035,
+      "idDescriptionLongMsg": 1000036,
       "sType": "d",
       "sMessageId": " ",
       "sMinUserLevel": "5"
@@ -158,6 +193,8 @@
       "sValue": "6000000",
       "sDescriptionShort": "Maximum volume for dropped waste",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000037,
+      "idDescriptionLongMsg": 1000038,
       "sType": "d",
       "sMessageId": " ",
       "sMinUserLevel": "5"
@@ -169,8 +206,10 @@
       "sValue": "150",
       "sDescriptionShort": "Maximum dice dimension",
       "sDescriptionLong": "",
+      "idDescriptionShortMsg": 1000039,
+      "idDescriptionLongMsg": 1000040,
       "sType": "d",
       "sMessageId": " ",
       "sMinUserLevel": "5"
    }
-]
+]
\ No newline at end of file
diff --git a/Strategies/Standard/HEADCUT/HEADCUT.json b/Strategies/Standard/HEADCUT/HEADCUT.json
index a6b28c7..cebf063 100644
--- a/Strategies/Standard/HEADCUT/HEADCUT.json
+++ b/Strategies/Standard/HEADCUT/HEADCUT.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Depth Chamfer",
          "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges",
+         "idDescriptionShortMsg": 1000301,
+         "idDescriptionLongMsg": 1000302,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "false",
          "sDescriptionShort": "Force to use chain saw",
          "sDescriptionLong": "Force to use chain saw",
+         "idDescriptionShortMsg": 1000303,
+         "idDescriptionLongMsg": 1000304,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "false",
          "sDescriptionShort": "Force to add PreCuts",
          "sDescriptionLong": "Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length",
+         "idDescriptionShortMsg": 1000305,
+         "idDescriptionLongMsg": 1000306,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "true",
          "sDescriptionShort": "Finish with mill",
          "sDescriptionLong": "Use a mill to finish the surface if split with chain saw",
+         "idDescriptionShortMsg": 1000307,
+         "idDescriptionLongMsg": 1000308,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -58,5 +66,4 @@
          "sMinUserLevel": "5"
       }
    ]
-}
-
+}
\ No newline at end of file
diff --git a/Strategies/Standard/STR0001/STR0001.json b/Strategies/Standard/STR0001/STR0001.json
index 29fe0c1..c3ec65b 100644
--- a/Strategies/Standard/STR0001/STR0001.json
+++ b/Strategies/Standard/STR0001/STR0001.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on tenon length",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000041,
+         "idDescriptionLongMsg": 1000042,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on tenon width",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000043,
+         "idDescriptionLongMsg": 1000044,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "3",
          "sDescriptionShort": "Maximum number of milling passes",
          "sDescriptionLong": "Maximum number of milling passes. If more passes are required, pocketing is performed",
+         "idDescriptionShortMsg": 1000045,
+         "idDescriptionLongMsg": 1000046,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "true",
          "sDescriptionShort": "Use DoveTail tool to pocket",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000047,
+         "idDescriptionLongMsg": 1000048,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -48,6 +56,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Cutting Strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000049,
+         "idDescriptionLongMsg": 1000050,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -55,24 +65,32 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000051,
+               "idDescriptionLongMsg": 1000052,
                "sMessageId": ""
             },
             {
                "sValue": "BLADE_FORCED",
                "sDescriptionShort": "Blade only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000053,
+               "idDescriptionLongMsg": 1000054,
                "sMessageId": ""
             },
             {
                "sValue": "MILL_FORCED",
                "sDescriptionShort": "Mill only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000055,
+               "idDescriptionLongMsg": 1000056,
                "sMessageId": ""
             },
             {
                "sValue": "CHAINSAW_FORCED",
                "sDescriptionShort": "ChainSaw only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000057,
+               "idDescriptionLongMsg": 1000058,
                "sMessageId": ""
             }
          ]
@@ -83,6 +101,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the tenon cut surface",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000059,
+         "idDescriptionLongMsg": 1000060,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
@@ -94,6 +114,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the dovetail tenon",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000061,
+         "idDescriptionLongMsg": 1000062,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0002/STR0002.json b/Strategies/Standard/STR0002/STR0002.json
index 43b7f08..8fbe5fe 100644
--- a/Strategies/Standard/STR0002/STR0002.json
+++ b/Strategies/Standard/STR0002/STR0002.json
@@ -8,6 +8,8 @@
          "sValue": "15",
          "sDescriptionShort": "Max radius left on corners",
          "sDescriptionLong": "Radius-limit left by the tool at each corner of the feature",
+         "idDescriptionShortMsg": 1000063,
+         "idDescriptionLongMsg": 1000064,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "false",
          "sDescriptionShort": "Use Anti-Splint strategy",
          "sDescriptionLong": "The strategy will apply blade cuts on corner to avoid wood splint",
+         "idDescriptionShortMsg": 1000065,
+         "idDescriptionLongMsg": 1000066,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "",
          "sDescriptionShort": "Extend after tail",
          "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar",
+         "idDescriptionShortMsg": 1000067,
+         "idDescriptionLongMsg": 1000068,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "10",
          "sDescriptionShort": "Minimum approach distance on open sides",
          "sDescriptionLong": "Minimum approach distance on open sides",
+         "idDescriptionShortMsg": 1000069,
+         "idDescriptionLongMsg": 1000070,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -48,6 +56,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to pocket the feature",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000071,
+         "idDescriptionLongMsg": 1000072,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0003/STR0003.json b/Strategies/Standard/STR0003/STR0003.json
index f639c9d..692d6a1 100644
--- a/Strategies/Standard/STR0003/STR0003.json
+++ b/Strategies/Standard/STR0003/STR0003.json
@@ -8,6 +8,8 @@
          "sValue": "true",
          "sDescriptionShort": "Finish with chainsaw if needed",
          "sDescriptionLong": "Finish with chainsaw if needed",
+         "idDescriptionShortMsg": 1000073,
+         "idDescriptionLongMsg": 1000074,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "",
          "sDescriptionShort": "Extend after tail",
          "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar",
+         "idDescriptionShortMsg": 1000075,
+         "idDescriptionLongMsg": 1000076,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "false",
          "sDescriptionShort": "Force ripping blade",
          "sDescriptionLong": "Force the use of ripping blade, designed for cuts parallel to the grain",
+         "idDescriptionShortMsg": 1000077,
+         "idDescriptionLongMsg": 1000078,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "true",
          "sDescriptionShort": "Not complete with Blade radius imprint left",
          "sDescriptionLong": "If the parameter is active, the automatism considers the feature as - not complete - if the blade radius imprint is left",
+         "idDescriptionShortMsg": 1000079,
+         "idDescriptionLongMsg": 1000080,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -48,6 +56,8 @@
          "sValue": "false",
          "sDescriptionShort": "Use Zig-Zag ChainSaw",
          "sDescriptionLong": "Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement.",
+         "idDescriptionShortMsg": 1000081,
+         "idDescriptionLongMsg": 1000082,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -58,6 +68,8 @@
          "sValue": "true",
          "sDescriptionShort": "Sort by segment",
          "sDescriptionLong": "Sort the machinings according to the piece-segment where the machining has inserted",
+         "idDescriptionShortMsg": 1000083,
+         "idDescriptionLongMsg": 1000084,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -68,6 +80,8 @@
          "sValue": "NEVER",
          "sDescriptionShort": "Damage next piece",
          "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time",
+         "idDescriptionShortMsg": 1000085,
+         "idDescriptionLongMsg": 1000086,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -75,18 +89,24 @@
                "sValue": "NEVER",
                "sDescriptionShort": "Never damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000087,
+               "idDescriptionLongMsg": 1000088,
                "sMessageId": ""
             },
             {
                "sValue": "ONLY_IF_RAWPART",
                "sDescriptionShort": "Damage only if raw",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000089,
+               "idDescriptionLongMsg": 1000090,
                "sMessageId": ""
             },
             {
                "sValue": "ALWAYS",
                "sDescriptionShort": "Can damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000091,
+               "idDescriptionLongMsg": 1000092,
                "sMessageId": ""
             }
          ]
diff --git a/Strategies/Standard/STR0004/STR0004.json b/Strategies/Standard/STR0004/STR0004.json
index 40c0aa9..4105b73 100644
--- a/Strategies/Standard/STR0004/STR0004.json
+++ b/Strategies/Standard/STR0004/STR0004.json
@@ -8,6 +8,8 @@
          "sValue": "false",
          "sDescriptionShort": "Use Zig-Zag ChainSaw",
          "sDescriptionLong": "Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement.",
+         "idDescriptionShortMsg": 1000093,
+         "idDescriptionLongMsg": 1000094,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "",
          "sDescriptionShort": "Extend after tail",
          "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar",
+         "idDescriptionShortMsg": 1000095,
+         "idDescriptionLongMsg": 1000096,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "NEVER",
          "sDescriptionShort": "Damage next piece",
          "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time",
+         "idDescriptionShortMsg": 1000097,
+         "idDescriptionLongMsg": 1000098,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -35,18 +41,24 @@
                "sValue": "NEVER",
                "sDescriptionShort": "Never damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000099,
+               "idDescriptionLongMsg": 1000100,
                "sMessageId": ""
             },
             {
                "sValue": "ONLY_IF_RAWPART",
                "sDescriptionShort": "Damage only if raw",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000101,
+               "idDescriptionLongMsg": 1000102,
                "sMessageId": ""
             },
             {
                "sValue": "ALWAYS",
                "sDescriptionShort": "Can damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000103,
+               "idDescriptionLongMsg": 1000104,
                "sMessageId": ""
             }
          ]
diff --git a/Strategies/Standard/STR0005/STR0005.json b/Strategies/Standard/STR0005/STR0005.json
index c5575bf..ad1cf38 100644
--- a/Strategies/Standard/STR0005/STR0005.json
+++ b/Strategies/Standard/STR0005/STR0005.json
@@ -8,6 +8,8 @@
          "sValue": "false",
          "sDescriptionShort": "Force ripping blade",
          "sDescriptionLong": "Force the use of ripping blade, designed for cuts parallel to the grain",
+         "idDescriptionShortMsg": 1000105,
+         "idDescriptionLongMsg": 1000106,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "",
          "sDescriptionShort": "Extend after tail",
          "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar",
+         "idDescriptionShortMsg": 1000107,
+         "idDescriptionLongMsg": 1000108,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "NEVER",
          "sDescriptionShort": "Damage next piece",
          "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time",
+         "idDescriptionShortMsg": 1000109,
+         "idDescriptionLongMsg": 1000110,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -35,18 +41,24 @@
                "sValue": "NEVER",
                "sDescriptionShort": "Never damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000111,
+               "idDescriptionLongMsg": 1000112,
                "sMessageId": ""
             },
             {
                "sValue": "ONLY_IF_RAWPART",
                "sDescriptionShort": "Damage only if raw",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000113,
+               "idDescriptionLongMsg": 1000114,
                "sMessageId": ""
             },
             {
                "sValue": "ALWAYS",
                "sDescriptionShort": "Can damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000115,
+               "idDescriptionLongMsg": 1000116,
                "sMessageId": ""
             }
          ]
@@ -57,6 +69,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Cutting strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000117,
+         "idDescriptionLongMsg": 1000118,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -64,18 +78,24 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000119,
+               "idDescriptionLongMsg": 1000120,
                "sMessageId": ""
             },
             {
                "sValue": "DROP_WASTE",
                "sDescriptionShort": "Drop waste",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000121,
+               "idDescriptionLongMsg": 1000122,
                "sMessageId": ""
             },
             {
                "sValue": "KEEP_WASTE_ATTACHED",
                "sDescriptionShort": "Keep waste attached",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000123,
+               "idDescriptionLongMsg": 1000124,
                "sMessageId": ""
             }
          ]
@@ -86,6 +106,8 @@
          "sValue": "false",
          "sDescriptionShort": "Disable dicing",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000125,
+         "idDescriptionLongMsg": 1000126,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -96,6 +118,8 @@
          "sValue": "false",
          "sDescriptionShort": "Prioritize machining speed over quality",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000127,
+         "idDescriptionLongMsg": 1000128,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -106,6 +130,8 @@
          "sValue": "5",
          "sDescriptionShort": "Strip width",
          "sDescriptionLong": "In case the waste is still kept attached, this is the wigth dimension of the strip",
+         "idDescriptionShortMsg": 1000129,
+         "idDescriptionLongMsg": 1000130,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -116,6 +142,8 @@
          "sValue": "true",
          "sDescriptionShort": "Clean blade radius with mill",
          "sDescriptionLong": "Clean blade radius with mill",
+         "idDescriptionShortMsg": 1000131,
+         "idDescriptionLongMsg": 1000132,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -126,6 +154,8 @@
          "sValue": "1",
          "sDescriptionShort": "Milling offset from side",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000133,
+         "idDescriptionLongMsg": 1000134,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
diff --git a/Strategies/Standard/STR0006/STR0006.json b/Strategies/Standard/STR0006/STR0006.json
index ce22a37..3b47bea 100644
--- a/Strategies/Standard/STR0006/STR0006.json
+++ b/Strategies/Standard/STR0006/STR0006.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on tenon length",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000135,
+         "idDescriptionLongMsg": 1000136,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on tenon width",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000137,
+         "idDescriptionLongMsg": 1000138,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "3",
          "sDescriptionShort": "Maximum number of milling passes",
          "sDescriptionLong": "Maximum number of milling passes. If more passes are required, pocketing is performed",
+         "idDescriptionShortMsg": 1000139,
+         "idDescriptionLongMsg": 1000140,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Cutting Strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000141,
+         "idDescriptionLongMsg": 1000142,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -45,24 +53,32 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000143,
+               "idDescriptionLongMsg": 1000144,
                "sMessageId": ""
             },
             {
                "sValue": "BLADE_FORCED",
                "sDescriptionShort": "Blade only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000145,
+               "idDescriptionLongMsg": 1000146,
                "sMessageId": ""
             },
             {
                "sValue": "MILL_FORCED",
                "sDescriptionShort": "Mill only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000147,
+               "idDescriptionLongMsg": 1000148,
                "sMessageId": ""
             },
             {
                "sValue": "CHAINSAW_FORCED",
                "sDescriptionShort": "ChainSaw only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000149,
+               "idDescriptionLongMsg": 1000150,
                "sMessageId": ""
             }
          ]
@@ -73,6 +89,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the tenon",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000151,
+         "idDescriptionLongMsg": 1000152,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0007/STR0007.json b/Strategies/Standard/STR0007/STR0007.json
index a85faa6..0f8731a 100644
--- a/Strategies/Standard/STR0007/STR0007.json
+++ b/Strategies/Standard/STR0007/STR0007.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on Mortise length",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000153,
+         "idDescriptionLongMsg": 1000154,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on Mortise width",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000155,
+         "idDescriptionLongMsg": 1000156,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "3",
          "sDescriptionShort": "Maximum number of milling passes",
          "sDescriptionLong": "Maximum number of milling passes. If more passes are required, pocketing is performed",
+         "idDescriptionShortMsg": 1000157,
+         "idDescriptionLongMsg": 1000158,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "true",
          "sDescriptionShort": "Use DoveTail tool in case of pocketing",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000159,
+         "idDescriptionLongMsg": 1000160,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -48,6 +56,8 @@
          "sValue": "true",
          "sDescriptionShort": "Add Anti-Splint",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000161,
+         "idDescriptionLongMsg": 1000162,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -58,6 +68,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Cutting Strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000163,
+         "idDescriptionLongMsg": 1000164,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -65,24 +77,32 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000165,
+               "idDescriptionLongMsg": 1000166,
                "sMessageId": ""
             },
             {
                "sValue": "BLADE_FORCED",
                "sDescriptionShort": "Blade only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000167,
+               "idDescriptionLongMsg": 1000168,
                "sMessageId": ""
             },
             {
                "sValue": "MILL_FORCED",
                "sDescriptionShort": "Mill only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000169,
+               "idDescriptionLongMsg": 1000170,
                "sMessageId": ""
             },
             {
                "sValue": "CHAINSAW_FORCED",
                "sDescriptionShort": "ChainSaw only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000171,
+               "idDescriptionLongMsg": 1000172,
                "sMessageId": ""
             }
          ]
@@ -93,6 +113,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the mortise cut surface",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000173,
+         "idDescriptionLongMsg": 1000174,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
@@ -104,6 +126,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the dovetail mortise",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000175,
+         "idDescriptionLongMsg": 1000176,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0008/STR0008.json b/Strategies/Standard/STR0008/STR0008.json
index 22d8522..870523e 100644
--- a/Strategies/Standard/STR0008/STR0008.json
+++ b/Strategies/Standard/STR0008/STR0008.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on mortise length",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000177,
+         "idDescriptionLongMsg": 1000178,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial on mortise width",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000179,
+         "idDescriptionLongMsg": 1000180,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Cutting Strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000181,
+         "idDescriptionLongMsg": 1000182,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -35,24 +41,32 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000183,
+               "idDescriptionLongMsg": 1000184,
                "sMessageId": ""
             },
             {
                "sValue": "BLADE_FORCED",
                "sDescriptionShort": "Blade only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000185,
+               "idDescriptionLongMsg": 1000186,
                "sMessageId": ""
             },
             {
                "sValue": "MILL_FORCED",
                "sDescriptionShort": "Mill only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000187,
+               "idDescriptionLongMsg": 1000188,
                "sMessageId": ""
             },
             {
                "sValue": "CHAINSAW_FORCED",
                "sDescriptionShort": "ChainSaw only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000189,
+               "idDescriptionLongMsg": 1000190,
                "sMessageId": ""
             }
          ]
@@ -63,6 +77,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the mortise cut surface",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000191,
+         "idDescriptionLongMsg": 1000192,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
@@ -74,6 +90,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the mortise",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000193,
+         "idDescriptionLongMsg": 1000194,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0009/STR0009.json b/Strategies/Standard/STR0009/STR0009.json
index 16b9d3e..2b836dc 100644
--- a/Strategies/Standard/STR0009/STR0009.json
+++ b/Strategies/Standard/STR0009/STR0009.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Depth Chamfer",
          "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges",
+         "idDescriptionShortMsg": 1000195,
+         "idDescriptionLongMsg": 1000196,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "false",
          "sDescriptionShort": "Use Anti-Splint strategy",
          "sDescriptionLong": "The strategy will apply blade cuts on corner to avoid wood splint",
+         "idDescriptionShortMsg": 1000197,
+         "idDescriptionLongMsg": 1000198,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the profile",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000199,
+         "idDescriptionLongMsg": 1000200,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0010/STR0010.json b/Strategies/Standard/STR0010/STR0010.json
index 4b279c9..4b7726d 100644
--- a/Strategies/Standard/STR0010/STR0010.json
+++ b/Strategies/Standard/STR0010/STR0010.json
@@ -8,6 +8,8 @@
          "sValue": "false",
          "sDescriptionShort": "Antisplint with blade",
          "sDescriptionLong": "Use the blade as antisplint in case the geometry is not through",
+         "idDescriptionShortMsg": 1000201,
+         "idDescriptionLongMsg": 1000202,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "",
          "sDescriptionShort": "Extend after tail",
          "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar",
+         "idDescriptionShortMsg": 1000203,
+         "idDescriptionLongMsg": 1000204,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "true",
          "sDescriptionShort": "Clean radius with mill",
          "sDescriptionLong": "Clean radius with mill",
+         "idDescriptionShortMsg": 1000205,
+         "idDescriptionLongMsg": 1000206,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "1",
          "sDescriptionShort": "Milling offset from side",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000207,
+         "idDescriptionLongMsg": 1000208,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -48,6 +56,8 @@
          "sValue": "NEVER",
          "sDescriptionShort": "Damage next piece",
          "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time",
+         "idDescriptionShortMsg": 1000209,
+         "idDescriptionLongMsg": 1000210,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -55,18 +65,24 @@
                "sValue": "NEVER",
                "sDescriptionShort": "Never damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000211,
+               "idDescriptionLongMsg": 1000212,
                "sMessageId": ""
             },
             {
                "sValue": "ONLY_IF_RAWPART",
                "sDescriptionShort": "Damage only if raw",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000213,
+               "idDescriptionLongMsg": 1000214,
                "sMessageId": ""
             },
             {
                "sValue": "ALWAYS",
                "sDescriptionShort": "Can damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000215,
+               "idDescriptionLongMsg": 1000216,
                "sMessageId": ""
             }
          ]
diff --git a/Strategies/Standard/STR0011/STR0011.json b/Strategies/Standard/STR0011/STR0011.json
index 950a130..0a0244e 100644
--- a/Strategies/Standard/STR0011/STR0011.json
+++ b/Strategies/Standard/STR0011/STR0011.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Tolerance on Diameter",
          "sDescriptionLong": "Tolerance on Diameter",
+         "idDescriptionShortMsg": 1000217,
+         "idDescriptionLongMsg": 1000218,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "0",
          "sDescriptionShort": "Depth PreHole",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000219,
+         "idDescriptionLongMsg": 1000220,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Drilling Mode",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000221,
+         "idDescriptionLongMsg": 1000222,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -35,18 +41,24 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000223,
+               "idDescriptionLongMsg": 1000224,
                "sMessageId": ""
             },
             {
                "sValue": "PREFER_ONE",
                "sDescriptionShort": "Preferred machining from one side only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000225,
+               "idDescriptionLongMsg": 1000226,
                "sMessageId": ""
             },
             {
                "sValue": "FORCE_TWO",
                "sDescriptionShort": "Force machining from two sides",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000227,
+               "idDescriptionLongMsg": 1000228,
                "sMessageId": ""
             }
          ]
@@ -57,6 +69,8 @@
          "sValue": "",
          "sDescriptionShort": "Available Drillbit list",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000229,
+         "idDescriptionLongMsg": 1000230,
          "sType": "tool",
          "sSubType": "MCH_TF.DRILLBIT",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0012/STR0012.json b/Strategies/Standard/STR0012/STR0012.json
index 8d0ff5b..a30e81f 100644
--- a/Strategies/Standard/STR0012/STR0012.json
+++ b/Strategies/Standard/STR0012/STR0012.json
@@ -8,6 +8,8 @@
          "sValue": "",
          "sDescriptionShort": "Extend after tail",
          "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar",
+         "idDescriptionShortMsg": 1000231,
+         "idDescriptionLongMsg": 1000232,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "NEVER",
          "sDescriptionShort": "Damage next piece",
          "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time",
+         "idDescriptionShortMsg": 1000233,
+         "idDescriptionLongMsg": 1000234,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -25,18 +29,24 @@
                "sValue": "NEVER",
                "sDescriptionShort": "Never damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000235,
+               "idDescriptionLongMsg": 1000236,
                "sMessageId": ""
             },
             {
                "sValue": "ONLY_IF_RAWPART",
                "sDescriptionShort": "Damage only if raw",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000237,
+               "idDescriptionLongMsg": 1000238,
                "sMessageId": ""
             },
             {
                "sValue": "ALWAYS",
                "sDescriptionShort": "Can damage",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000239,
+               "idDescriptionLongMsg": 1000240,
                "sMessageId": ""
             }
          ]
@@ -47,6 +57,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Ridge Lap strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000241,
+         "idDescriptionLongMsg": 1000242,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -54,18 +66,24 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000243,
+               "idDescriptionLongMsg": 1000244,
                "sMessageId": ""
             },
             {
                "sValue": "BLADE",
                "sDescriptionShort": "Use blade",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000245,
+               "idDescriptionLongMsg": 1000246,
                "sMessageId": ""
             },
             {
                "sValue": "MILL",
                "sDescriptionShort": "Use mill",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000247,
+               "idDescriptionLongMsg": 1000248,
                "sMessageId": ""
             }
          ]
diff --git a/Strategies/Standard/STR0013/STR0013.json b/Strategies/Standard/STR0013/STR0013.json
index 626e33b..28263ab 100644
--- a/Strategies/Standard/STR0013/STR0013.json
+++ b/Strategies/Standard/STR0013/STR0013.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Tolerance on Diameter",
          "sDescriptionLong": "Tolerance on Diameter",
+         "idDescriptionShortMsg": 1000249,
+         "idDescriptionLongMsg": 1000250,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "0",
          "sDescriptionShort": "Use mill as a drillbit",
          "sDescriptionLong": "Admit to use the mill as a drillbit",
+         "idDescriptionShortMsg": 1000251,
+         "idDescriptionLongMsg": 1000252,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "0",
          "sDescriptionShort": "Execute contour only",
          "sDescriptionLong": "Execute the contour anyway, even the hole is bigger than the tool diameter",
+         "idDescriptionShortMsg": 1000253,
+         "idDescriptionLongMsg": 1000254,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Drilling mode",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000255,
+         "idDescriptionLongMsg": 1000256,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -45,18 +53,24 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000257,
+               "idDescriptionLongMsg": 1000258,
                "sMessageId": ""
             },
             {
                "sValue": "PREFER_ONE",
                "sDescriptionShort": "Preferred machining from one side only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000259,
+               "idDescriptionLongMsg": 1000260,
                "sMessageId": ""
             },
             {
                "sValue": "FORCE_TWO",
                "sDescriptionShort": "Force machining from two sides",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000261,
+               "idDescriptionLongMsg": 1000262,
                "sMessageId": ""
             }
          ]
@@ -67,6 +81,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine drills",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000263,
+         "idDescriptionLongMsg": 1000264,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
diff --git a/Strategies/Standard/STR0014/STR0014.json b/Strategies/Standard/STR0014/STR0014.json
index bc53cfe..aff0b3b 100644
--- a/Strategies/Standard/STR0014/STR0014.json
+++ b/Strategies/Standard/STR0014/STR0014.json
@@ -8,6 +8,8 @@
          "sValue": "1",
          "sDescriptionShort": "Machining Depth",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000265,
+         "idDescriptionLongMsg": 1000266,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine mark and text",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000267,
+         "idDescriptionLongMsg": 1000268,
          "sType": "tool",
          "sSubType": "MCH_TF.MILL",
          "sMessageId": " ",
@@ -29,6 +33,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Marking Strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000269,
+         "idDescriptionLongMsg": 1000270,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -36,18 +42,24 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000271,
+               "idDescriptionLongMsg": 1000272,
                "sMessageId": ""
             },
             {
                "sValue": "PEN_FORCED",
                "sDescriptionShort": "Pen only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000273,
+               "idDescriptionLongMsg": 1000274,
                "sMessageId": ""
             },
             {
                "sValue": "VMILL_FORCED",
                "sDescriptionShort": "V-Mill only",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000275,
+               "idDescriptionLongMsg": 1000276,
                "sMessageId": ""
             }
          ]
diff --git a/Strategies/Standard/STR0015/STR0015.json b/Strategies/Standard/STR0015/STR0015.json
index d9532ef..5994258 100644
--- a/Strategies/Standard/STR0015/STR0015.json
+++ b/Strategies/Standard/STR0015/STR0015.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Depth Chamfer",
          "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges",
+         "idDescriptionShortMsg": 1000277,
+         "idDescriptionLongMsg": 1000278,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "false",
          "sDescriptionShort": "Only Chamfer",
          "sDescriptionLong": "Execute the chamfer only, no other machining",
+         "idDescriptionShortMsg": 1000279,
+         "idDescriptionLongMsg": 1000280,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "0",
          "sDescriptionShort": "Overmaterial",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000281,
+         "idDescriptionLongMsg": 1000282,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "15",
          "sDescriptionShort": "Max radius left on corners",
          "sDescriptionLong": "Radius-limit left by the tool at each corner of the feature",
+         "idDescriptionShortMsg": 1000283,
+         "idDescriptionLongMsg": 1000284,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -48,6 +56,8 @@
          "sValue": "true",
          "sDescriptionShort": "Execute cut to remove material",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000285,
+         "idDescriptionLongMsg": 1000286,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -58,6 +68,8 @@
          "sValue": "false",
          "sDescriptionShort": "Force strip",
          "sDescriptionLong": "Enable the parameter to force the software to leave a strip to sustain the piece",
+         "idDescriptionShortMsg": 1000287,
+         "idDescriptionLongMsg": 1000288,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -68,6 +80,8 @@
          "sValue": "0",
          "sDescriptionShort": "Strip width",
          "sDescriptionLong": "Width of the strip in case if foreseen from the machining",
+         "idDescriptionShortMsg": 1000289,
+         "idDescriptionLongMsg": 1000290,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -78,6 +92,8 @@
          "sValue": "AUTO",
          "sDescriptionShort": "Cutting Strategy",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000291,
+         "idDescriptionLongMsg": 1000292,
          "sType": "combo",
          "sMinUserLevel": "1",
          "Choices": [
@@ -85,24 +101,32 @@
                "sValue": "AUTO",
                "sDescriptionShort": "Automatic",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000293,
+               "idDescriptionLongMsg": 1000294,
                "sMessageId": ""
             },
             {
                "sValue": "NONE",
                "sDescriptionShort": "No machining",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000295,
+               "idDescriptionLongMsg": 1000296,
                "sMessageId": ""
             },
             {
                "sValue": "BLADE_FORCED",
                "sDescriptionShort": "Blade forced",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000297,
+               "idDescriptionLongMsg": 1000298,
                "sMessageId": ""
             },
             {
                "sValue": "MILL_FORCED",
                "sDescriptionShort": "Mill forced",
                "sDescriptionLong": "",
+               "idDescriptionShortMsg": 1000299,
+               "idDescriptionLongMsg": 1000300,
                "sMessageId": ""
             }
          ]
@@ -113,6 +137,8 @@
          "sValue": "",
          "sDescriptionShort": "Available mill to machine the profile",
          "sDescriptionLong": "",
+         "idDescriptionShortMsg": 1000301,
+         "idDescriptionLongMsg": 1000302,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
diff --git a/Strategies/Standard/TAILCUT/TAILCUT.json b/Strategies/Standard/TAILCUT/TAILCUT.json
index 24dfc4a..a40f732 100644
--- a/Strategies/Standard/TAILCUT/TAILCUT.json
+++ b/Strategies/Standard/TAILCUT/TAILCUT.json
@@ -8,6 +8,8 @@
          "sValue": "0",
          "sDescriptionShort": "Depth Chamfer",
          "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges",
+         "idDescriptionShortMsg": 1000309,
+         "idDescriptionLongMsg": 1000310,
          "sType": "d",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -18,6 +20,8 @@
          "sValue": "false",
          "sDescriptionShort": "Force to use chain saw",
          "sDescriptionLong": "Force to use chain saw",
+         "idDescriptionShortMsg": 1000311,
+         "idDescriptionLongMsg": 1000312,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -28,6 +32,8 @@
          "sValue": "true",
          "sDescriptionShort": "Force to add PreCuts",
          "sDescriptionLong": "Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length",
+         "idDescriptionShortMsg": 1000313,
+         "idDescriptionLongMsg": 1000314,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"
@@ -38,6 +44,8 @@
          "sValue": "true",
          "sDescriptionShort": "Finish with mill",
          "sDescriptionLong": "Use a mill to finish the surface if split with chain saw",
+         "idDescriptionShortMsg": 1000315,
+         "idDescriptionLongMsg": 1000316,
          "sType": "b",
          "sMessageId": " ",
          "sMinUserLevel": "1"