diff --git a/LuaLibs/BasicCustomerStrategies.lua b/LuaLibs/BasicCustomerStrategies.lua
index fde7b67..e976d26 100644
--- a/LuaLibs/BasicCustomerStrategies.lua
+++ b/LuaLibs/BasicCustomerStrategies.lua
@@ -65,7 +65,7 @@ local function GetStrategies_Egalware( Proc)
    ---------------------------------------------------------------------
    -- Feature : Ridge or Valley Cut (0-12)
    elseif ID.IsDoubleLongitudinalCut( Proc) then
-      Strategies = { { sStrategyId = 'STR0010'}}
+      Strategies = { { sStrategyId = 'STR0005'}, { sStrategyId = 'STR0010'}}
    ---------------------------------------------------------------------
    -- Feature : Saw Cut (0-13)
    elseif ID.IsSawCut( Proc) then
@@ -389,7 +389,7 @@ local function GetStrategies_Essetre( Proc)
    ---------------------------------------------------------------------
    -- Feature : Ridge or Valley Cut (0-12)
    elseif ID.IsDoubleLongitudinalCut( Proc) then
-      Strategies = { { sStrategyId = 'STR0010'}}
+      Strategies = { { sStrategyId = 'STR0005'}, { sStrategyId = 'STR0010'}}
    ---------------------------------------------------------------------
    -- Feature : Saw Cut (0-13)
    elseif ID.IsSawCut( Proc) then
diff --git a/LuaLibs/BeamExec.lua b/LuaLibs/BeamExec.lua
index cc8b00c..de23e49 100644
--- a/LuaLibs/BeamExec.lua
+++ b/LuaLibs/BeamExec.lua
@@ -135,6 +135,7 @@ function BeamExec.GetToolsFromDB()
          if not Tool.SetupInfo.dMaxMatDecrease then
             Tool.SetupInfo.dMaxMatDecrease = 0
          end
+         -- TODO sostituire la qualità numerica con una stringa??
          Tool.nQuality = 1
          Tool.sUUID = EgtTdbGetCurrToolParam( MCH_TP.UUID)
          Tool.sUserNotes = EgtTdbGetCurrToolParam( MCH_TP.USERNOTES)
diff --git a/LuaLibs/MachiningLib.lua b/LuaLibs/MachiningLib.lua
index 7911981..89953ed 100644
--- a/LuaLibs/MachiningLib.lua
+++ b/LuaLibs/MachiningLib.lua
@@ -751,7 +751,7 @@ function MachiningLib.AddOperations( vProc, Part, sRotation)
       { sName = 'nOpenOutRaw',                sMchParam = 'OpenOutRaw'},
       { sName = 'nPlunge',                    sMchParam = 'Plunge'},
       { sName = 'vtFaceUse',                  sMchParam = 'VtFaceUse'},
-      { sName = 'nEdgeFaceUse',               sMchParam = 'EdgeFaceUse'}
+      { sName = 'nEdgesFaceUse',               sMchParam = 'EdgesFaceUse'}
    }
 
    -- parametri da scrivere nelle note di sistema
diff --git a/StrategyLibs/BLADETOWASTE.lua b/StrategyLibs/BLADETOWASTE.lua
index ba9ace0..57a0bee 100644
--- a/StrategyLibs/BLADETOWASTE.lua
+++ b/StrategyLibs/BLADETOWASTE.lua
@@ -441,7 +441,6 @@ local function CutWithDicing( Proc, Part, OptionalParameters)
       -- calcolo lavorazione della singola faccia
       for j = 1, #vCuts[i] do
          local Cutting = {}
-         local _, Edges = FaceData.GetEdgesInfo( vCuts[i][1], 0)
          local vtNCurrentFace = EgtSurfTmFacetNormVersor( vCuts[i][j], 0, GDB_ID.ROOT)
          local FaceToMachine = { id = 0, vtN = vtNCurrentFace}
          -- se taglio DownUp e strato pari composto da 1 o 2 elementi (tutti gli altri casi vengono saltati)
@@ -453,6 +452,7 @@ local function CutWithDicing( Proc, Part, OptionalParameters)
             end
             -- lavorazione
             local ProcTrimesh = FeatureLib.GetProcFromTrimesh( vCuts[i][j], Part)
+            local _, Edges = FaceData.GetEdgesInfo( vCuts[i][j], 0)
             local EdgeToMachine = BeamLib.FindEdgeBestOrientedAsDirection( Edges, vtToolDirectionNew)
             local dDepthToMachine = EdgeToMachine.dElevation + BeamData.CUT_EXTRA
             local OptionalParametersFaceByBlade = { dDepthToMachine = dDepthToMachine,
@@ -488,6 +488,7 @@ local function CutWithDicing( Proc, Part, OptionalParameters)
                end
             end
             local ProcTrimesh = FeatureLib.GetProcFromTrimesh( vCuts[i][j], Part)
+            local _, Edges = FaceData.GetEdgesInfo( vCuts[i][j], 0)
             local EdgeToMachine = BeamLib.FindEdgeBestOrientedAsDirection( Edges, vtToolDirection)
             local EdgeToMachineAlternative = {}
             if ( i % 2 == 0) and ( Proc.Fct == 1) and bNoPerpCuts then
diff --git a/StrategyLibs/FACEBYBLADE.lua b/StrategyLibs/FACEBYBLADE.lua
index a1f0b23..b44a0c2 100644
--- a/StrategyLibs/FACEBYBLADE.lua
+++ b/StrategyLibs/FACEBYBLADE.lua
@@ -174,7 +174,6 @@ local function GetSCC( vtMachiningDirection, vtEdgeDirection, vtNFace)
 end
 
 
--- TODO calcolo area lavorata per completamento
 -- TODO EdgeToMachineAlternative da gestire
 -- TODO invert avanzato (direzione, Z, alternativa, ...) da gestire
 -- TODO bilinea da gestire
@@ -350,13 +349,15 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
    Cutting.dStartSafetyLength = BeamData.CUT_SIC
    -- overlap
    Cutting.dOverlap = 0
-   -- faceuse e frame lavorazione
+   -- EdgeUse e frame lavorazione
    if bOppositeToolDirection then
       Cutting.nFaceuse = BeamLib.GetNearestOrthoOpposite( -Cutting.vtToolDirection)
-      Cutting.vtFaceUse = -Cutting.vtToolDirection
+      --Cutting.vtFaceUse = -Cutting.vtToolDirection
+      Cutting.nEdgesFaceUse = EdgeToMachine.id
    else
       Cutting.nFaceuse = BeamLib.GetNearestOrthoOpposite( Cutting.vtToolDirection)
-      Cutting.vtFaceUse = Cutting.vtToolDirection
+      --Cutting.vtFaceUse = Cutting.vtToolDirection
+      Cutting.nEdgesFaceUse = EdgeToMachine.id
    end
    -- SCC
    Cutting.nSCC = GetSCC( Cutting.vtToolDirection, Cutting.vtEdgeDirection, FaceToMachine.vtN)
diff --git a/StrategyLibs/FACEBYMILL.lua b/StrategyLibs/FACEBYMILL.lua
index 81540aa..bcdbb99 100644
--- a/StrategyLibs/FACEBYMILL.lua
+++ b/StrategyLibs/FACEBYMILL.lua
@@ -352,10 +352,12 @@ function FACEBYMILL.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPara
    -- faceuse e frame lavorazione
    if bOppositeToolDirection then
       Milling.nFaceuse = BeamLib.GetNearestOrthoOpposite( -Milling.vtToolDirection)
-      Milling.vtFaceUse = -Milling.vtToolDirection
+      --Milling.vtFaceUse = -Milling.vtToolDirection
+      Milling.nEdgesFaceUse = EdgeToMachine.id
    else
       Milling.nFaceuse = BeamLib.GetNearestOrthoOpposite( Milling.vtToolDirection)
-      Milling.vtFaceUse = Milling.vtToolDirection
+      --Milling.vtFaceUse = Milling.vtToolDirection
+      Milling.nEdgesFaceUse = EdgeToMachine.id
    end
    -- SCC
    Milling.nSCC = GetSCC( Milling.vtToolDirection)