- in FACEBYBLADE/MILL/CHAINSAW il parametro bOppositeToolDirection diventa OppositeToolDirectionMode (Enabled, Disabled, Optimized solo per blade); strategie modificate di conseguenza

- in FACEBYBLADE se OppositeToolDirectionMode = 'Optimized', la funzione sceglie se lavorare il lato in negativo per far combaciare concordanza e lavorazione verso l'alto

StrategyLibs/FACEBYBLADE.lua

@@ -250,7 +250,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
    local dPocketHeight = OptionalParameters.dPocketHeight or 0
    local dDepthToMachine = OptionalParameters.dDepthToMachine or EdgeToMachine.dElevation
    local bIsSplitFeature = OptionalParameters.bIsSplitFeature or false
-   local bOppositeToolDirection = OptionalParameters.bOppositeToolDirection or false
+   local OppositeToolDirectionMode = OptionalParameters.OppositeToolDirectionMode or 'Disabled'
    local bReduceBladePath = OptionalParameters.bReduceBladePath or false
    local sDepth = OptionalParameters.sDepth or 0
    local nToolIndex = OptionalParameters.nToolIndex
@@ -264,7 +264,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
 
    -- lunghezze, direzioni e punti caratteristici della lavorazione e del lato lavorato
    Cutting.dEdgeLength = EdgeToMachine.dLength
-   if bOppositeToolDirection then
+   if OppositeToolDirectionMode == 'Enabled' then
       Cutting.vtToolDirection = -EdgeToMachine.vtN
    else
       Cutting.vtToolDirection = EdgeToMachine.vtN
@@ -340,7 +340,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
    -- inizio e fine aperti o chiusi
       Cutting.bIsStartClosed = not EdgeToMachine.bIsStartOpen
       Cutting.bIsEndClosed = not EdgeToMachine.bIsEndOpen
-   -- lato di lavoro e inversione
+   -- lato di lavoro e inversione per avere taglio concorde
    if TOOLS[Cutting.nToolIndex].bIsCCW then
       Cutting.nWorkside = MCH_MILL_WS.RIGHT
       Cutting.bInvert = true
@@ -348,7 +348,32 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
       Cutting.nWorkside = MCH_MILL_WS.LEFT
       Cutting.bInvert = false
    end
-   if bOppositeToolDirection then
+   -- se OppositeToolDirectionMode è Optimized, se possibile e necessario, si attiva per garantire taglio concorde e verso l'alto (massima qualità)
+   if ( OppositeToolDirectionMode == 'Optimized') and ( Proc.nFct == 1) then
+      OppositeToolDirectionMode = 'Disabled'
+      -- la direzione di percorrenza del lato deve essere verso l'alto; bInvert va considerata perchè inverte la direzione di percorrenza.
+      if ( Cutting.bInvert and Cutting.vtEdgeDirection:getZ() > 100 * GEO.EPS_SMALL)
+         or ( ( not Cutting.bInvert) and Cutting.vtEdgeDirection:getZ() < -100 * GEO.EPS_SMALL) then
+
+         -- si attiva OppositeToolDirection solo se non cambiano le condizioni di taglio downUp
+         local dNewMinNzDownUp = TOOLS[nToolIndex].SetupInfo.GetMinNzDownUp( Part.b3Raw, FaceToMachine.vtN, -Cutting.vtToolDirection, TOOLS[nToolIndex])
+         if ( FaceToMachine.vtN:getZ() < dMinNzDownUp) == ( FaceToMachine.vtN:getZ() < dNewMinNzDownUp) then
+            OppositeToolDirectionMode = 'Enabled'
+            Cutting.vtToolDirection = -EdgeToMachine.vtN
+            Cutting.ptEdge1, _, Cutting.ptEdge2 = EgtSurfTmFacetOppositeSide( Proc.id, FaceToMachine.id, -Cutting.vtToolDirection, GDB_ID.ROOT)
+            Cutting.bInvert = not Cutting.bInvert
+         -- se le condizioni downUp cambiano, si setta per tagliare verso l'alto
+         else
+            if Cutting.nWorkside == MCH_MILL_WS.RIGHT then
+               Cutting.nWorkside = MCH_MILL_WS.LEFT
+               Cutting.bInvert = false
+            else
+               Cutting.nWorkside = MCH_MILL_WS.RIGHT
+               Cutting.bInvert = true
+            end
+         end
+      end
+   elseif OppositeToolDirectionMode == 'Enabled' then
       Cutting.bInvert = not Cutting.bInvert
    end
    if Cutting.bToolInvert then
@@ -360,7 +385,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
          -- TODO la depth dovrebbe essere quella del machining
          Cutting.dDepthToMachine = dDepthToMachine
          Cutting.dResidualDepth = 0
-         if bOppositeToolDirection then
+         if OppositeToolDirectionMode == 'Enabled' then
             Cutting.dRadialOffset = -dDepthToMachine
          else
             Cutting.dRadialOffset = EdgeToMachine.dElevation - dDepthToMachine
@@ -368,7 +393,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
       else
          Cutting.dDepthToMachine = TOOLS[Cutting.nToolIndex].dMaxDepth - 1
          Cutting.dResidualDepth = dDepthToMachine - Cutting.dDepthToMachine
-         if bOppositeToolDirection then
+         if OppositeToolDirectionMode == 'Enabled' then
             Cutting.dRadialOffset = -Cutting.dDepthToMachine
          else
             Cutting.dRadialOffset = EdgeToMachine.dElevation - Cutting.dDepthToMachine
@@ -397,7 +422,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
             end
          end
       end
-      if bOppositeToolDirection then
+      if OppositeToolDirectionMode == 'Enabled' then
          Cutting.dRadialOffset = -dDepthToMachine
       else
          Cutting.dRadialOffset = EdgeToMachine.dElevation - dDepthToMachine
@@ -423,7 +448,7 @@ function FACEBYBLADE.Make( Proc, Part, FaceToMachine, EdgeToMachine, OptionalPar
    -- overlap
    Cutting.dOverlap = 0
    -- EdgeUse e frame lavorazione
-   if bOppositeToolDirection then
+   if OppositeToolDirectionMode == 'Enabled' then
       Cutting.nFaceuse = BeamLib.GetNearestOrthoOpposite( -Cutting.vtToolDirection)
       --Cutting.vtFaceUse = -Cutting.vtToolDirection
       Cutting.nEdgesFaceUse = EdgeToMachine.id