diff --git a/Strategies/GeneralParameters.json b/Strategies/GeneralParameters.json index 30568da..0af1506 100644 --- a/Strategies/GeneralParameters.json +++ b/Strategies/GeneralParameters.json @@ -1,4 +1,3 @@ - [ { "nGroup": "PIECE LOADING", @@ -7,6 +6,8 @@ "sValue": "BTL_POSITION", "sDescriptionShort": "Part loading position", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000001, + "idDescriptionLongMsg": 1000002, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -14,18 +15,24 @@ "sValue": "BTL_POSITION", "sDescriptionShort": "Loading position from BTL, no pre-rotation", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000003, + "idDescriptionLongMsg": 1000004, "sMessageId": "" }, { "sValue": "STD_PRE_ROTATION", "sDescriptionShort": "Get Best loading position from 0° and 180°", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000005, + "idDescriptionLongMsg": 1000006, "sMessageId": "" }, { "sValue": "FULL_PRE_ROTATION", "sDescriptionShort": "Get Best loading position in each piece rotation", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000007, + "idDescriptionLongMsg": 1000008, "sMessageId": "" } ] @@ -37,6 +44,8 @@ "sValue": "false", "sDescriptionShort": "Allow piece inversion", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000009, + "idDescriptionLongMsg": 1000010, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +57,8 @@ "sValue": "false", "sDescriptionShort": "Enable material optimization function in nesting (part rotation disabled)", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000011, + "idDescriptionLongMsg": 1000012, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -59,6 +70,8 @@ "sValue": "IF_NECESSARY", "sDescriptionShort": "Part rotating acceptability", "sDescriptionLong": "Acceptability of rotating the part between machining steps", + "idDescriptionShortMsg": 1000013, + "idDescriptionLongMsg": 1000014, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -66,18 +79,24 @@ "sValue": "NOT_ALLOWED", "sDescriptionShort": "Rotation not allowed", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000015, + "idDescriptionLongMsg": 1000016, "sMessageId": "" }, { "sValue": "IF_NECESSARY", "sDescriptionShort": "Rotation allowed only if strictly necessary", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000017, + "idDescriptionLongMsg": 1000018, "sMessageId": "" }, { "sValue": "NO_CONSTRAINT", "sDescriptionShort": "Rotation easily acceptable / no constraint", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000019, + "idDescriptionLongMsg": 1000020, "sMessageId": "" } ] @@ -89,6 +108,8 @@ "sValue": "AUTO", "sDescriptionShort": "Machining Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000021, + "idDescriptionLongMsg": 1000022, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -96,24 +117,32 @@ "sValue": "AUTO", "sDescriptionShort": "Quality and time equally prioritized", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000023, + "idDescriptionLongMsg": 1000024, "sMessageId": "" }, { "sValue": "FASTEST", "sDescriptionShort": "Fastest", "sDescriptionLong": "Prefer fastest strategies", + "idDescriptionShortMsg": 1000025, + "idDescriptionLongMsg": 1000026, "sMessageId": "" }, { "sValue": "HIGH_QUALITY", "sDescriptionShort": "High quality", "sDescriptionLong": "Prefer high-quality strategies", + "idDescriptionShortMsg": 1000027, + "idDescriptionLongMsg": 1000028, "sMessageId": "" }, { "sValue": "FIRST_IN_LIST", "sDescriptionShort": "Ordering rules", "sDescriptionLong": "The first complete strategy in list is the one chosen; no intelligent choosing", + "idDescriptionShortMsg": 1000029, + "idDescriptionLongMsg": 1000030, "sMessageId": "" } ] @@ -125,6 +154,8 @@ "sValue": "1", "sDescriptionShort": "Max number of reprocessing cycles", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000031, + "idDescriptionLongMsg": 1000032, "sType": "d", "sMessageId": " ", "sMinUserLevel": "10" @@ -136,6 +167,8 @@ "sValue": "true", "sDescriptionShort": "Use entire blade diameter to shorten path", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000033, + "idDescriptionLongMsg": 1000034, "sType": "b", "sMessageId": " ", "sMinUserLevel": "5" @@ -147,6 +180,8 @@ "sValue": "300", "sDescriptionShort": "Maximum length for dropped waste", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000035, + "idDescriptionLongMsg": 1000036, "sType": "d", "sMessageId": " ", "sMinUserLevel": "5" @@ -158,6 +193,8 @@ "sValue": "6000000", "sDescriptionShort": "Maximum volume for dropped waste", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000037, + "idDescriptionLongMsg": 1000038, "sType": "d", "sMessageId": " ", "sMinUserLevel": "5" @@ -169,8 +206,10 @@ "sValue": "150", "sDescriptionShort": "Maximum dice dimension", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000039, + "idDescriptionLongMsg": 1000040, "sType": "d", "sMessageId": " ", "sMinUserLevel": "5" } -] +] \ No newline at end of file diff --git a/Strategies/Standard/HEADCUT/HEADCUT.json b/Strategies/Standard/HEADCUT/HEADCUT.json index a6b28c7..cebf063 100644 --- a/Strategies/Standard/HEADCUT/HEADCUT.json +++ b/Strategies/Standard/HEADCUT/HEADCUT.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Depth Chamfer", "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges", + "idDescriptionShortMsg": 1000301, + "idDescriptionLongMsg": 1000302, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "false", "sDescriptionShort": "Force to use chain saw", "sDescriptionLong": "Force to use chain saw", + "idDescriptionShortMsg": 1000303, + "idDescriptionLongMsg": 1000304, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "false", "sDescriptionShort": "Force to add PreCuts", "sDescriptionLong": "Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length", + "idDescriptionShortMsg": 1000305, + "idDescriptionLongMsg": 1000306, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "true", "sDescriptionShort": "Finish with mill", "sDescriptionLong": "Use a mill to finish the surface if split with chain saw", + "idDescriptionShortMsg": 1000307, + "idDescriptionLongMsg": 1000308, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -58,5 +66,4 @@ "sMinUserLevel": "5" } ] -} - +} \ No newline at end of file diff --git a/Strategies/Standard/STR0001/STR0001.json b/Strategies/Standard/STR0001/STR0001.json index 29fe0c1..c3ec65b 100644 --- a/Strategies/Standard/STR0001/STR0001.json +++ b/Strategies/Standard/STR0001/STR0001.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on tenon length", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000041, + "idDescriptionLongMsg": 1000042, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on tenon width", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000043, + "idDescriptionLongMsg": 1000044, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "3", "sDescriptionShort": "Maximum number of milling passes", "sDescriptionLong": "Maximum number of milling passes. If more passes are required, pocketing is performed", + "idDescriptionShortMsg": 1000045, + "idDescriptionLongMsg": 1000046, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "true", "sDescriptionShort": "Use DoveTail tool to pocket", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000047, + "idDescriptionLongMsg": 1000048, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +56,8 @@ "sValue": "AUTO", "sDescriptionShort": "Cutting Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000049, + "idDescriptionLongMsg": 1000050, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -55,24 +65,32 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000051, + "idDescriptionLongMsg": 1000052, "sMessageId": "" }, { "sValue": "BLADE_FORCED", "sDescriptionShort": "Blade only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000053, + "idDescriptionLongMsg": 1000054, "sMessageId": "" }, { "sValue": "MILL_FORCED", "sDescriptionShort": "Mill only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000055, + "idDescriptionLongMsg": 1000056, "sMessageId": "" }, { "sValue": "CHAINSAW_FORCED", "sDescriptionShort": "ChainSaw only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000057, + "idDescriptionLongMsg": 1000058, "sMessageId": "" } ] @@ -83,6 +101,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the tenon cut surface", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000059, + "idDescriptionLongMsg": 1000060, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", @@ -94,6 +114,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the dovetail tenon", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000061, + "idDescriptionLongMsg": 1000062, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0002/STR0002.json b/Strategies/Standard/STR0002/STR0002.json index 43b7f08..8fbe5fe 100644 --- a/Strategies/Standard/STR0002/STR0002.json +++ b/Strategies/Standard/STR0002/STR0002.json @@ -8,6 +8,8 @@ "sValue": "15", "sDescriptionShort": "Max radius left on corners", "sDescriptionLong": "Radius-limit left by the tool at each corner of the feature", + "idDescriptionShortMsg": 1000063, + "idDescriptionLongMsg": 1000064, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "false", "sDescriptionShort": "Use Anti-Splint strategy", "sDescriptionLong": "The strategy will apply blade cuts on corner to avoid wood splint", + "idDescriptionShortMsg": 1000065, + "idDescriptionLongMsg": 1000066, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "", "sDescriptionShort": "Extend after tail", "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar", + "idDescriptionShortMsg": 1000067, + "idDescriptionLongMsg": 1000068, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "10", "sDescriptionShort": "Minimum approach distance on open sides", "sDescriptionLong": "Minimum approach distance on open sides", + "idDescriptionShortMsg": 1000069, + "idDescriptionLongMsg": 1000070, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +56,8 @@ "sValue": "", "sDescriptionShort": "Available mill to pocket the feature", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000071, + "idDescriptionLongMsg": 1000072, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0003/STR0003.json b/Strategies/Standard/STR0003/STR0003.json index f639c9d..692d6a1 100644 --- a/Strategies/Standard/STR0003/STR0003.json +++ b/Strategies/Standard/STR0003/STR0003.json @@ -8,6 +8,8 @@ "sValue": "true", "sDescriptionShort": "Finish with chainsaw if needed", "sDescriptionLong": "Finish with chainsaw if needed", + "idDescriptionShortMsg": 1000073, + "idDescriptionLongMsg": 1000074, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "", "sDescriptionShort": "Extend after tail", "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar", + "idDescriptionShortMsg": 1000075, + "idDescriptionLongMsg": 1000076, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "false", "sDescriptionShort": "Force ripping blade", "sDescriptionLong": "Force the use of ripping blade, designed for cuts parallel to the grain", + "idDescriptionShortMsg": 1000077, + "idDescriptionLongMsg": 1000078, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "true", "sDescriptionShort": "Not complete with Blade radius imprint left", "sDescriptionLong": "If the parameter is active, the automatism considers the feature as - not complete - if the blade radius imprint is left", + "idDescriptionShortMsg": 1000079, + "idDescriptionLongMsg": 1000080, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +56,8 @@ "sValue": "false", "sDescriptionShort": "Use Zig-Zag ChainSaw", "sDescriptionLong": "Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement.", + "idDescriptionShortMsg": 1000081, + "idDescriptionLongMsg": 1000082, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -58,6 +68,8 @@ "sValue": "true", "sDescriptionShort": "Sort by segment", "sDescriptionLong": "Sort the machinings according to the piece-segment where the machining has inserted", + "idDescriptionShortMsg": 1000083, + "idDescriptionLongMsg": 1000084, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -68,6 +80,8 @@ "sValue": "NEVER", "sDescriptionShort": "Damage next piece", "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time", + "idDescriptionShortMsg": 1000085, + "idDescriptionLongMsg": 1000086, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -75,18 +89,24 @@ "sValue": "NEVER", "sDescriptionShort": "Never damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000087, + "idDescriptionLongMsg": 1000088, "sMessageId": "" }, { "sValue": "ONLY_IF_RAWPART", "sDescriptionShort": "Damage only if raw", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000089, + "idDescriptionLongMsg": 1000090, "sMessageId": "" }, { "sValue": "ALWAYS", "sDescriptionShort": "Can damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000091, + "idDescriptionLongMsg": 1000092, "sMessageId": "" } ] diff --git a/Strategies/Standard/STR0004/STR0004.json b/Strategies/Standard/STR0004/STR0004.json index 40c0aa9..4105b73 100644 --- a/Strategies/Standard/STR0004/STR0004.json +++ b/Strategies/Standard/STR0004/STR0004.json @@ -8,6 +8,8 @@ "sValue": "false", "sDescriptionShort": "Use Zig-Zag ChainSaw", "sDescriptionLong": "Enable the parameter to set the Zig-Zag movement on the ChainSaw machining. Deactivate it to use One-Way movement.", + "idDescriptionShortMsg": 1000093, + "idDescriptionLongMsg": 1000094, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "", "sDescriptionShort": "Extend after tail", "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar", + "idDescriptionShortMsg": 1000095, + "idDescriptionLongMsg": 1000096, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "NEVER", "sDescriptionShort": "Damage next piece", "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time", + "idDescriptionShortMsg": 1000097, + "idDescriptionLongMsg": 1000098, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -35,18 +41,24 @@ "sValue": "NEVER", "sDescriptionShort": "Never damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000099, + "idDescriptionLongMsg": 1000100, "sMessageId": "" }, { "sValue": "ONLY_IF_RAWPART", "sDescriptionShort": "Damage only if raw", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000101, + "idDescriptionLongMsg": 1000102, "sMessageId": "" }, { "sValue": "ALWAYS", "sDescriptionShort": "Can damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000103, + "idDescriptionLongMsg": 1000104, "sMessageId": "" } ] diff --git a/Strategies/Standard/STR0005/STR0005.json b/Strategies/Standard/STR0005/STR0005.json index c5575bf..ad1cf38 100644 --- a/Strategies/Standard/STR0005/STR0005.json +++ b/Strategies/Standard/STR0005/STR0005.json @@ -8,6 +8,8 @@ "sValue": "false", "sDescriptionShort": "Force ripping blade", "sDescriptionLong": "Force the use of ripping blade, designed for cuts parallel to the grain", + "idDescriptionShortMsg": 1000105, + "idDescriptionLongMsg": 1000106, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "", "sDescriptionShort": "Extend after tail", "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar", + "idDescriptionShortMsg": 1000107, + "idDescriptionLongMsg": 1000108, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "NEVER", "sDescriptionShort": "Damage next piece", "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time", + "idDescriptionShortMsg": 1000109, + "idDescriptionLongMsg": 1000110, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -35,18 +41,24 @@ "sValue": "NEVER", "sDescriptionShort": "Never damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000111, + "idDescriptionLongMsg": 1000112, "sMessageId": "" }, { "sValue": "ONLY_IF_RAWPART", "sDescriptionShort": "Damage only if raw", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000113, + "idDescriptionLongMsg": 1000114, "sMessageId": "" }, { "sValue": "ALWAYS", "sDescriptionShort": "Can damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000115, + "idDescriptionLongMsg": 1000116, "sMessageId": "" } ] @@ -57,6 +69,8 @@ "sValue": "AUTO", "sDescriptionShort": "Cutting strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000117, + "idDescriptionLongMsg": 1000118, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -64,18 +78,24 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000119, + "idDescriptionLongMsg": 1000120, "sMessageId": "" }, { "sValue": "DROP_WASTE", "sDescriptionShort": "Drop waste", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000121, + "idDescriptionLongMsg": 1000122, "sMessageId": "" }, { "sValue": "KEEP_WASTE_ATTACHED", "sDescriptionShort": "Keep waste attached", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000123, + "idDescriptionLongMsg": 1000124, "sMessageId": "" } ] @@ -86,6 +106,8 @@ "sValue": "false", "sDescriptionShort": "Disable dicing", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000125, + "idDescriptionLongMsg": 1000126, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -96,6 +118,8 @@ "sValue": "false", "sDescriptionShort": "Prioritize machining speed over quality", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000127, + "idDescriptionLongMsg": 1000128, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -106,6 +130,8 @@ "sValue": "5", "sDescriptionShort": "Strip width", "sDescriptionLong": "In case the waste is still kept attached, this is the wigth dimension of the strip", + "idDescriptionShortMsg": 1000129, + "idDescriptionLongMsg": 1000130, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -116,6 +142,8 @@ "sValue": "true", "sDescriptionShort": "Clean blade radius with mill", "sDescriptionLong": "Clean blade radius with mill", + "idDescriptionShortMsg": 1000131, + "idDescriptionLongMsg": 1000132, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -126,6 +154,8 @@ "sValue": "1", "sDescriptionShort": "Milling offset from side", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000133, + "idDescriptionLongMsg": 1000134, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" diff --git a/Strategies/Standard/STR0006/STR0006.json b/Strategies/Standard/STR0006/STR0006.json index ce22a37..3b47bea 100644 --- a/Strategies/Standard/STR0006/STR0006.json +++ b/Strategies/Standard/STR0006/STR0006.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on tenon length", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000135, + "idDescriptionLongMsg": 1000136, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on tenon width", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000137, + "idDescriptionLongMsg": 1000138, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "3", "sDescriptionShort": "Maximum number of milling passes", "sDescriptionLong": "Maximum number of milling passes. If more passes are required, pocketing is performed", + "idDescriptionShortMsg": 1000139, + "idDescriptionLongMsg": 1000140, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "AUTO", "sDescriptionShort": "Cutting Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000141, + "idDescriptionLongMsg": 1000142, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -45,24 +53,32 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000143, + "idDescriptionLongMsg": 1000144, "sMessageId": "" }, { "sValue": "BLADE_FORCED", "sDescriptionShort": "Blade only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000145, + "idDescriptionLongMsg": 1000146, "sMessageId": "" }, { "sValue": "MILL_FORCED", "sDescriptionShort": "Mill only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000147, + "idDescriptionLongMsg": 1000148, "sMessageId": "" }, { "sValue": "CHAINSAW_FORCED", "sDescriptionShort": "ChainSaw only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000149, + "idDescriptionLongMsg": 1000150, "sMessageId": "" } ] @@ -73,6 +89,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the tenon", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000151, + "idDescriptionLongMsg": 1000152, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0007/STR0007.json b/Strategies/Standard/STR0007/STR0007.json index a85faa6..0f8731a 100644 --- a/Strategies/Standard/STR0007/STR0007.json +++ b/Strategies/Standard/STR0007/STR0007.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on Mortise length", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000153, + "idDescriptionLongMsg": 1000154, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on Mortise width", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000155, + "idDescriptionLongMsg": 1000156, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "3", "sDescriptionShort": "Maximum number of milling passes", "sDescriptionLong": "Maximum number of milling passes. If more passes are required, pocketing is performed", + "idDescriptionShortMsg": 1000157, + "idDescriptionLongMsg": 1000158, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "true", "sDescriptionShort": "Use DoveTail tool in case of pocketing", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000159, + "idDescriptionLongMsg": 1000160, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +56,8 @@ "sValue": "true", "sDescriptionShort": "Add Anti-Splint", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000161, + "idDescriptionLongMsg": 1000162, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -58,6 +68,8 @@ "sValue": "AUTO", "sDescriptionShort": "Cutting Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000163, + "idDescriptionLongMsg": 1000164, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -65,24 +77,32 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000165, + "idDescriptionLongMsg": 1000166, "sMessageId": "" }, { "sValue": "BLADE_FORCED", "sDescriptionShort": "Blade only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000167, + "idDescriptionLongMsg": 1000168, "sMessageId": "" }, { "sValue": "MILL_FORCED", "sDescriptionShort": "Mill only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000169, + "idDescriptionLongMsg": 1000170, "sMessageId": "" }, { "sValue": "CHAINSAW_FORCED", "sDescriptionShort": "ChainSaw only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000171, + "idDescriptionLongMsg": 1000172, "sMessageId": "" } ] @@ -93,6 +113,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the mortise cut surface", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000173, + "idDescriptionLongMsg": 1000174, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", @@ -104,6 +126,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the dovetail mortise", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000175, + "idDescriptionLongMsg": 1000176, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0008/STR0008.json b/Strategies/Standard/STR0008/STR0008.json index 22d8522..870523e 100644 --- a/Strategies/Standard/STR0008/STR0008.json +++ b/Strategies/Standard/STR0008/STR0008.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on mortise length", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000177, + "idDescriptionLongMsg": 1000178, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial on mortise width", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000179, + "idDescriptionLongMsg": 1000180, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "AUTO", "sDescriptionShort": "Cutting Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000181, + "idDescriptionLongMsg": 1000182, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -35,24 +41,32 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000183, + "idDescriptionLongMsg": 1000184, "sMessageId": "" }, { "sValue": "BLADE_FORCED", "sDescriptionShort": "Blade only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000185, + "idDescriptionLongMsg": 1000186, "sMessageId": "" }, { "sValue": "MILL_FORCED", "sDescriptionShort": "Mill only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000187, + "idDescriptionLongMsg": 1000188, "sMessageId": "" }, { "sValue": "CHAINSAW_FORCED", "sDescriptionShort": "ChainSaw only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000189, + "idDescriptionLongMsg": 1000190, "sMessageId": "" } ] @@ -63,6 +77,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the mortise cut surface", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000191, + "idDescriptionLongMsg": 1000192, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", @@ -74,6 +90,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the mortise", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000193, + "idDescriptionLongMsg": 1000194, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0009/STR0009.json b/Strategies/Standard/STR0009/STR0009.json index 16b9d3e..2b836dc 100644 --- a/Strategies/Standard/STR0009/STR0009.json +++ b/Strategies/Standard/STR0009/STR0009.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Depth Chamfer", "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges", + "idDescriptionShortMsg": 1000195, + "idDescriptionLongMsg": 1000196, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "false", "sDescriptionShort": "Use Anti-Splint strategy", "sDescriptionLong": "The strategy will apply blade cuts on corner to avoid wood splint", + "idDescriptionShortMsg": 1000197, + "idDescriptionLongMsg": 1000198, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the profile", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000199, + "idDescriptionLongMsg": 1000200, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0010/STR0010.json b/Strategies/Standard/STR0010/STR0010.json index 4b279c9..4b7726d 100644 --- a/Strategies/Standard/STR0010/STR0010.json +++ b/Strategies/Standard/STR0010/STR0010.json @@ -8,6 +8,8 @@ "sValue": "false", "sDescriptionShort": "Antisplint with blade", "sDescriptionLong": "Use the blade as antisplint in case the geometry is not through", + "idDescriptionShortMsg": 1000201, + "idDescriptionLongMsg": 1000202, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "", "sDescriptionShort": "Extend after tail", "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar", + "idDescriptionShortMsg": 1000203, + "idDescriptionLongMsg": 1000204, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "true", "sDescriptionShort": "Clean radius with mill", "sDescriptionLong": "Clean radius with mill", + "idDescriptionShortMsg": 1000205, + "idDescriptionLongMsg": 1000206, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "1", "sDescriptionShort": "Milling offset from side", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000207, + "idDescriptionLongMsg": 1000208, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +56,8 @@ "sValue": "NEVER", "sDescriptionShort": "Damage next piece", "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time", + "idDescriptionShortMsg": 1000209, + "idDescriptionLongMsg": 1000210, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -55,18 +65,24 @@ "sValue": "NEVER", "sDescriptionShort": "Never damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000211, + "idDescriptionLongMsg": 1000212, "sMessageId": "" }, { "sValue": "ONLY_IF_RAWPART", "sDescriptionShort": "Damage only if raw", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000213, + "idDescriptionLongMsg": 1000214, "sMessageId": "" }, { "sValue": "ALWAYS", "sDescriptionShort": "Can damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000215, + "idDescriptionLongMsg": 1000216, "sMessageId": "" } ] diff --git a/Strategies/Standard/STR0011/STR0011.json b/Strategies/Standard/STR0011/STR0011.json index 950a130..0a0244e 100644 --- a/Strategies/Standard/STR0011/STR0011.json +++ b/Strategies/Standard/STR0011/STR0011.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Tolerance on Diameter", "sDescriptionLong": "Tolerance on Diameter", + "idDescriptionShortMsg": 1000217, + "idDescriptionLongMsg": 1000218, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "0", "sDescriptionShort": "Depth PreHole", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000219, + "idDescriptionLongMsg": 1000220, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "AUTO", "sDescriptionShort": "Drilling Mode", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000221, + "idDescriptionLongMsg": 1000222, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -35,18 +41,24 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000223, + "idDescriptionLongMsg": 1000224, "sMessageId": "" }, { "sValue": "PREFER_ONE", "sDescriptionShort": "Preferred machining from one side only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000225, + "idDescriptionLongMsg": 1000226, "sMessageId": "" }, { "sValue": "FORCE_TWO", "sDescriptionShort": "Force machining from two sides", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000227, + "idDescriptionLongMsg": 1000228, "sMessageId": "" } ] @@ -57,6 +69,8 @@ "sValue": "", "sDescriptionShort": "Available Drillbit list", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000229, + "idDescriptionLongMsg": 1000230, "sType": "tool", "sSubType": "MCH_TF.DRILLBIT", "sMessageId": " ", diff --git a/Strategies/Standard/STR0012/STR0012.json b/Strategies/Standard/STR0012/STR0012.json index 8d0ff5b..a30e81f 100644 --- a/Strategies/Standard/STR0012/STR0012.json +++ b/Strategies/Standard/STR0012/STR0012.json @@ -8,6 +8,8 @@ "sValue": "", "sDescriptionShort": "Extend after tail", "sDescriptionLong": "The automatism considers this length as machinable. This means you accept to damage the next piece in the bar", + "idDescriptionShortMsg": 1000231, + "idDescriptionLongMsg": 1000232, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "NEVER", "sDescriptionShort": "Damage next piece", "sDescriptionLong": "This option allows you to decide how to consider the next piece in the bar. The software calculates specifics LeadIn/out to respect the parameter. This parameter may change the machining time", + "idDescriptionShortMsg": 1000233, + "idDescriptionLongMsg": 1000234, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -25,18 +29,24 @@ "sValue": "NEVER", "sDescriptionShort": "Never damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000235, + "idDescriptionLongMsg": 1000236, "sMessageId": "" }, { "sValue": "ONLY_IF_RAWPART", "sDescriptionShort": "Damage only if raw", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000237, + "idDescriptionLongMsg": 1000238, "sMessageId": "" }, { "sValue": "ALWAYS", "sDescriptionShort": "Can damage", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000239, + "idDescriptionLongMsg": 1000240, "sMessageId": "" } ] @@ -47,6 +57,8 @@ "sValue": "AUTO", "sDescriptionShort": "Ridge Lap strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000241, + "idDescriptionLongMsg": 1000242, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -54,18 +66,24 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000243, + "idDescriptionLongMsg": 1000244, "sMessageId": "" }, { "sValue": "BLADE", "sDescriptionShort": "Use blade", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000245, + "idDescriptionLongMsg": 1000246, "sMessageId": "" }, { "sValue": "MILL", "sDescriptionShort": "Use mill", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000247, + "idDescriptionLongMsg": 1000248, "sMessageId": "" } ] diff --git a/Strategies/Standard/STR0013/STR0013.json b/Strategies/Standard/STR0013/STR0013.json index 626e33b..28263ab 100644 --- a/Strategies/Standard/STR0013/STR0013.json +++ b/Strategies/Standard/STR0013/STR0013.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Tolerance on Diameter", "sDescriptionLong": "Tolerance on Diameter", + "idDescriptionShortMsg": 1000249, + "idDescriptionLongMsg": 1000250, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "0", "sDescriptionShort": "Use mill as a drillbit", "sDescriptionLong": "Admit to use the mill as a drillbit", + "idDescriptionShortMsg": 1000251, + "idDescriptionLongMsg": 1000252, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "0", "sDescriptionShort": "Execute contour only", "sDescriptionLong": "Execute the contour anyway, even the hole is bigger than the tool diameter", + "idDescriptionShortMsg": 1000253, + "idDescriptionLongMsg": 1000254, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "AUTO", "sDescriptionShort": "Drilling mode", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000255, + "idDescriptionLongMsg": 1000256, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -45,18 +53,24 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000257, + "idDescriptionLongMsg": 1000258, "sMessageId": "" }, { "sValue": "PREFER_ONE", "sDescriptionShort": "Preferred machining from one side only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000259, + "idDescriptionLongMsg": 1000260, "sMessageId": "" }, { "sValue": "FORCE_TWO", "sDescriptionShort": "Force machining from two sides", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000261, + "idDescriptionLongMsg": 1000262, "sMessageId": "" } ] @@ -67,6 +81,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine drills", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000263, + "idDescriptionLongMsg": 1000264, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", diff --git a/Strategies/Standard/STR0014/STR0014.json b/Strategies/Standard/STR0014/STR0014.json index bc53cfe..aff0b3b 100644 --- a/Strategies/Standard/STR0014/STR0014.json +++ b/Strategies/Standard/STR0014/STR0014.json @@ -8,6 +8,8 @@ "sValue": "1", "sDescriptionShort": "Machining Depth", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000265, + "idDescriptionLongMsg": 1000266, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine mark and text", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000267, + "idDescriptionLongMsg": 1000268, "sType": "tool", "sSubType": "MCH_TF.MILL", "sMessageId": " ", @@ -29,6 +33,8 @@ "sValue": "AUTO", "sDescriptionShort": "Marking Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000269, + "idDescriptionLongMsg": 1000270, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -36,18 +42,24 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000271, + "idDescriptionLongMsg": 1000272, "sMessageId": "" }, { "sValue": "PEN_FORCED", "sDescriptionShort": "Pen only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000273, + "idDescriptionLongMsg": 1000274, "sMessageId": "" }, { "sValue": "VMILL_FORCED", "sDescriptionShort": "V-Mill only", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000275, + "idDescriptionLongMsg": 1000276, "sMessageId": "" } ] diff --git a/Strategies/Standard/STR0015/STR0015.json b/Strategies/Standard/STR0015/STR0015.json index d9532ef..5994258 100644 --- a/Strategies/Standard/STR0015/STR0015.json +++ b/Strategies/Standard/STR0015/STR0015.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Depth Chamfer", "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges", + "idDescriptionShortMsg": 1000277, + "idDescriptionLongMsg": 1000278, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "false", "sDescriptionShort": "Only Chamfer", "sDescriptionLong": "Execute the chamfer only, no other machining", + "idDescriptionShortMsg": 1000279, + "idDescriptionLongMsg": 1000280, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "0", "sDescriptionShort": "Overmaterial", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000281, + "idDescriptionLongMsg": 1000282, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "15", "sDescriptionShort": "Max radius left on corners", "sDescriptionLong": "Radius-limit left by the tool at each corner of the feature", + "idDescriptionShortMsg": 1000283, + "idDescriptionLongMsg": 1000284, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -48,6 +56,8 @@ "sValue": "true", "sDescriptionShort": "Execute cut to remove material", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000285, + "idDescriptionLongMsg": 1000286, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -58,6 +68,8 @@ "sValue": "false", "sDescriptionShort": "Force strip", "sDescriptionLong": "Enable the parameter to force the software to leave a strip to sustain the piece", + "idDescriptionShortMsg": 1000287, + "idDescriptionLongMsg": 1000288, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -68,6 +80,8 @@ "sValue": "0", "sDescriptionShort": "Strip width", "sDescriptionLong": "Width of the strip in case if foreseen from the machining", + "idDescriptionShortMsg": 1000289, + "idDescriptionLongMsg": 1000290, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -78,6 +92,8 @@ "sValue": "AUTO", "sDescriptionShort": "Cutting Strategy", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000291, + "idDescriptionLongMsg": 1000292, "sType": "combo", "sMinUserLevel": "1", "Choices": [ @@ -85,24 +101,32 @@ "sValue": "AUTO", "sDescriptionShort": "Automatic", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000293, + "idDescriptionLongMsg": 1000294, "sMessageId": "" }, { "sValue": "NONE", "sDescriptionShort": "No machining", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000295, + "idDescriptionLongMsg": 1000296, "sMessageId": "" }, { "sValue": "BLADE_FORCED", "sDescriptionShort": "Blade forced", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000297, + "idDescriptionLongMsg": 1000298, "sMessageId": "" }, { "sValue": "MILL_FORCED", "sDescriptionShort": "Mill forced", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000299, + "idDescriptionLongMsg": 1000300, "sMessageId": "" } ] @@ -113,6 +137,8 @@ "sValue": "", "sDescriptionShort": "Available mill to machine the profile", "sDescriptionLong": "", + "idDescriptionShortMsg": 1000301, + "idDescriptionLongMsg": 1000302, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" diff --git a/Strategies/Standard/TAILCUT/TAILCUT.json b/Strategies/Standard/TAILCUT/TAILCUT.json index 24dfc4a..a40f732 100644 --- a/Strategies/Standard/TAILCUT/TAILCUT.json +++ b/Strategies/Standard/TAILCUT/TAILCUT.json @@ -8,6 +8,8 @@ "sValue": "0", "sDescriptionShort": "Depth Chamfer", "sDescriptionLong": "Depth of the V-Mill to execute chamfers on cut-edges", + "idDescriptionShortMsg": 1000309, + "idDescriptionLongMsg": 1000310, "sType": "d", "sMessageId": " ", "sMinUserLevel": "1" @@ -18,6 +20,8 @@ "sValue": "false", "sDescriptionShort": "Force to use chain saw", "sDescriptionLong": "Force to use chain saw", + "idDescriptionShortMsg": 1000311, + "idDescriptionLongMsg": 1000312, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -28,6 +32,8 @@ "sValue": "true", "sDescriptionShort": "Force to add PreCuts", "sDescriptionLong": "Autocam will apply a machining on the theoretical zero, to avoid collision if the theoretical piece length doesn't correspond to the real length", + "idDescriptionShortMsg": 1000313, + "idDescriptionLongMsg": 1000314, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1" @@ -38,6 +44,8 @@ "sValue": "true", "sDescriptionShort": "Finish with mill", "sDescriptionLong": "Use a mill to finish the surface if split with chain saw", + "idDescriptionShortMsg": 1000315, + "idDescriptionLongMsg": 1000316, "sType": "b", "sMessageId": " ", "sMinUserLevel": "1"