diff --git a/CMS_CORE_Application/Form1.cs b/CMS_CORE_Application/Form1.cs
index 8eee2ac..c192cfb 100644
--- a/CMS_CORE_Application/Form1.cs
+++ b/CMS_CORE_Application/Form1.cs
@@ -115,6 +115,23 @@ namespace CMS_CORE_Application
                 PreAlmLife = 21,
                 ResidualLife = 20,
                 EdgeAdditionalParams = new Dictionary<string, double>()
+                {
+                    { "cuttingEdge", 1 },
+                    { "lenght", 12 }
+                }
+            };
+
+            ShankModel newShank = new ShankModel()
+            {
+                Name = "MULTITOOLLISsimo",
+                MagazinePositionType = 1,
+                LeftSize = 1,
+                RightSize = 1,
+                IsEnabled = true,
+                InFixedPlace = true,
+                IsInhibited = true,
+                InChangeTool = true,
+                InUse = true
             };
 
             List<NewToolInMagazineModel> newMagazine = new List<NewToolInMagazineModel>()
@@ -194,34 +211,36 @@ namespace CMS_CORE_Application
                         error = true;
                         SetError(Lines, cmsError);
                     }
+                    // cmsError = N.TOOLS_WAddShank(ref newShank);
+                    // cmsError = N.TOOLS_WDeleteShank(4);
+                    //cmsError = N.TOOLS_WUpdateEdge(1, ref newEdge);
 
-                    cmsError = N.TOOLS_RConfiguration(ref toolsConfig);
-                    // cmsError = N.PLC_WRefreshAllMessages();
-                    cmsError = N.PLC_RHeadsData(headsTest, 1);
+                    //cmsError = N.TOOLS_RConfiguration(ref toolsConfig);
+                    //cmsError = N.PLC_WRefreshAllMessages();
+                    //cmsError = N.PLC_RHeadsData(headsTest, 1);
 
-                    cmsError = N.TOOLS_WAddEdge(6, ref newEdge);
+                    //cmsError = N.TOOLS_WAddEdge(6, ref newEdge);
 
 
-                    cmsError = N.TOOLS_RToolsData(ref dataTable);
-                    cmsError = N.TOOLS_RShanksData(ref shanks);
-                    cmsError = N.TOOLS_RFamilyData(ref famiies);
-                    cmsError = N.TOOLS_RMagazinePositions(ref positions);
-                    cmsError = N.TOOLS_WAddTool(ref newTool);
+                    //cmsError = N.TOOLS_RToolsData(ref dataTable);
+                    //cmsError = N.TOOLS_RShanksData(ref shanks);
+                    //cmsError = N.TOOLS_RFamilyData(ref famiies);
+                    //cmsError = N.TOOLS_RMagazinePositions(ref positions);
+                    //cmsError = N.TOOLS_WAddTool(ref newTool);
 
-                    ShankModel shank = new ShankModel();
-                    cmsError = N.TOOLS_WAddShank(ref shank);
-                    FamilyModel family = new FamilyModel
-                    {
-                        Name = "Da demo"
-                    };
-                    cmsError = N.TOOLS_WDeleteTool(11);
-                    // cmsError = N.TOOLS_WAddFamily(ref family);
-                    cmsError = N.TOOLS_RConfiguration(ref toolsConfig);
-                    // cmsError = N.TOOLS_WUpdateEdge(1, ref newEdge);
-                    cmsError = N.TOOLS_WUpdateTool(newTool);
-                    cmsError = N.TOOLS_RMagazineTools(1, ref magazine);
-                    cmsError = N.TOOLS_RAvailableTools(ref multiTools, ref tools);
-                    cmsError = N.TOOLS_WUpdateMagazineTools(1, newMagazine);
+                    //ShankModel shank = new ShankModel();
+                    //cmsError = N.TOOLS_WAddShank(ref shank);
+                    //FamilyModel family = new FamilyModel
+                    //{
+                    //    Name = "Da demo"
+                    //};
+                    //cmsError = N.TOOLS_WDeleteTool(11);
+                    //// cmsError = N.TOOLS_WAddFamily(ref family);
+                    //cmsError = N.TOOLS_RConfiguration(ref toolsConfig);
+                    //cmsError = N.TOOLS_WUpdateTool(newTool);
+                    //cmsError = N.TOOLS_RMagazineTools(1, ref magazine);
+                    //cmsError = N.TOOLS_RAvailableTools(ref multiTools, ref tools);
+                    //cmsError = N.TOOLS_WUpdateMagazineTools(1, newMagazine);
                     // N.PLC_WPowerOnData(6, true);
                     //N.PLC_RFunctionAccess(ref functionality);
 
diff --git a/CMS_CORE_Library/DataStructures.cs b/CMS_CORE_Library/DataStructures.cs
index bad8525..f4440f5 100644
--- a/CMS_CORE_Library/DataStructures.cs
+++ b/CMS_CORE_Library/DataStructures.cs
@@ -531,6 +531,7 @@ namespace CMS_CORE_Library
         {
             public string Name;
             public string Path;
+            public int Number;
         }
         
         public class MagazineAndToolModel
diff --git a/CMS_CORE_Library/Siemens/Nc_Siemens.cs b/CMS_CORE_Library/Siemens/Nc_Siemens.cs
index 09cb798..e44d666 100644
--- a/CMS_CORE_Library/Siemens/Nc_Siemens.cs
+++ b/CMS_CORE_Library/Siemens/Nc_Siemens.cs
@@ -1877,9 +1877,15 @@ namespace CMS_CORE.Siemens
                 {
                     case ToolAction.TOOL_DELETED:
                         {
-                            var tool = ToolTableData.SingleOrDefault(t => t.Id == toolInfo.tNo);
+                            SiemensToolModel tool = ToolTableData.SingleOrDefault(t => t.Id == toolInfo.tNo);
                             if (tool != null)
                                 ToolTableData.Remove(tool);
+                            else
+                            {
+                                ShankModel shank = Multitools.SingleOrDefault(t => t.Id == toolInfo.tNo);
+                                if (shank != null)
+                                    Multitools.Remove(shank);
+                            }
                         }
                         break;
 
@@ -1887,9 +1893,13 @@ namespace CMS_CORE.Siemens
                         {
                             // string[] toolsStrings = ReadToolTableFile();
 
-                            var newTool = CreateToolFromId((int)toolInfo.tNo, toolsStrings);
+                            SiemensToolModel newTool = CreateToolFromId((int)toolInfo.tNo, toolsStrings);
                             if (newTool != null)
                                 ToolTableData.Add(newTool);
+                            else
+                            {
+                                ShankModel newShank = CreateMultitoolFromId((int)toolInfo.tNo, toolsStrings);
+                            }
                         }
                         break;
 
@@ -1898,13 +1908,31 @@ namespace CMS_CORE.Siemens
                             // string[] toolsStrings = ReadToolTableFile();
 
                             // Fin edited toolIndex
-                            var toolIndex = ToolTableData.FindIndex(t => t.Id == toolInfo.tNo);
-                            // Get its new data
-                            var newTool = CreateToolFromId((int)toolInfo.tNo, toolsStrings);
+                            int toolIndex = ToolTableData.FindIndex(t => t.Id == toolInfo.tNo);
+                            // If the id belongs to a tool
+                            if(toolIndex != -1)
+                            {
+                                // Get tool new data
+                                SiemensToolModel newTool = CreateToolFromId((int)toolInfo.tNo, toolsStrings);
 
-                            // Replace the element
-                            if (newTool != null)
-                                ToolTableData[toolIndex] = newTool;
+                                // Replace the element
+                                if (newTool != null)
+                                    ToolTableData[toolIndex] = newTool;
+                            }
+                            else
+                            {
+                                // Find if its a multitool
+                                int multitoolIndex = Multitools.FindIndex(t => t.Id == toolInfo.tNo);
+
+                                if(multitoolIndex != -1)
+                                {
+                                    // Create model with new data
+                                    ShankModel newShank = CreateMultitoolFromId((int)toolInfo.tNo, toolsStrings);
+                                    // Replace element
+                                    if (newShank != null)
+                                        Multitools[multitoolIndex] = newShank;
+                                }
+                            }
                         }
                         break;
 
@@ -1947,6 +1975,7 @@ namespace CMS_CORE.Siemens
                 FamilyName = toolsStrings.FirstOrDefault(x => x.Contains("$TC_TP2[" + toolId)).Split('=').LastOrDefault().Replace("\"", ""),
                 LeftSize = Convert.ToByte(toolsStrings.FirstOrDefault(X => X.StartsWith("$TC_TP3[" + toolId)).Split('=').LastOrDefault()),
                 RightSize = Convert.ToByte(toolsStrings.FirstOrDefault(X => X.StartsWith("$TC_TP4[" + toolId)).Split('=').LastOrDefault()),
+                MagazinePositionType = Convert.ToByte(toolsStrings.FirstOrDefault( x => x.StartsWith("$TC_TP7[" + toolId)).Split('=').LastOrDefault()),
                 Rotation = rotation,
                 LifeType = (SIEMENS_LIFE_TYPE)Convert.ToInt32(toolsStrings.FirstOrDefault(x => x.StartsWith("$TC_TP9[" + toolId)).Split('=').LastOrDefault()),
                 Cooling1 = GetBitValue(toolInfo, 11),
@@ -1956,6 +1985,7 @@ namespace CMS_CORE.Siemens
                 IsInhibited = GetBitValue(toolStatus, 3),
                 IsMeasured = GetBitValue(toolStatus, 4),
                 InChangeTool = GetBitValue(toolStatus, 5),
+                IsEnabled = GetBitValue(toolStatus, 6),
                 IsInUse = GetBitValue(toolStatus, 7),
                 PreAlarm = GetBitValue(toolStatus, 8),
                 EdgesData = new List<EdgeModel>()
@@ -2000,6 +2030,39 @@ namespace CMS_CORE.Siemens
             return toolValues;
         }
 
+        private ShankModel CreateMultitoolFromId(int multitoolId, string[] toolsStrings)
+        {
+            SiemensEdgesConfiguration toolEdgesConfig = new SiemensEdgesConfiguration();
+
+            // Find tool status status
+            var toolStatusByte = toolsStrings.FirstOrDefault(X => X.StartsWith("$TC_MTP8[" + multitoolId));
+            if (toolStatusByte == null)
+                return null;
+
+            byte toolStatus = Convert.ToByte(toolStatusByte.Split('=').LastOrDefault());
+
+            ShankModel oldShank = Multitools.Where(x => x.Id == multitoolId).FirstOrDefault();
+
+            // Create shank model
+            ShankModel shank = new ShankModel()
+            {
+                Id = multitoolId,
+                Name = toolsStrings.FirstOrDefault(x => x.Contains("$TC_MTP2[" + multitoolId)).Split('=').LastOrDefault().Replace("\"", ""),
+                LeftSize = Convert.ToByte(toolsStrings.FirstOrDefault(X => X.StartsWith("$TC_MTP3[" + multitoolId)).Split('=').LastOrDefault()),
+                RightSize = Convert.ToByte(toolsStrings.FirstOrDefault(X => X.StartsWith("$TC_MTP4[" + multitoolId)).Split('=').LastOrDefault()),
+                MagazinePositionType = Convert.ToByte(toolsStrings.FirstOrDefault(x => x.StartsWith("$TC_MTP7[" + multitoolId)).Split('=').LastOrDefault()),
+                IsEnabled = GetBitValue(toolStatus, 2),
+                IsInhibited = GetBitValue(toolStatus, 3),
+                InChangeTool = GetBitValue(toolStatus, 6),
+                InFixedPlace = GetBitValue(toolStatus, 7),
+                InUse = GetBitValue(toolStatus, 8),
+                ChildsTools = oldShank == null ? new List<ShankChildModel>() : oldShank.ChildsTools
+            };
+            
+
+            return shank;
+        }
+
         private void CreateToolsFromFileStrings(string[] toolsStrings)
         {
             SiemensEdgesConfiguration toolEdgesConfig = new SiemensEdgesConfiguration();
@@ -2503,28 +2566,7 @@ namespace CMS_CORE.Siemens
                 tool.FamilyName = tool.FamilyName.Substring(0, 32);
             try
             {
-                // Get tool ids
-                List<int> toolIds = ToolTableData.Select(x => x.Id).ToList();
-                // Sort tools ids array
-                toolIds.Sort((x, y) => x.CompareTo(y));
-                int toolId = 1;
-                for (int i = 1; i <= toolIds.Count; i++)
-                {
-                    // If next id is different than previus + 1, there is an empty space
-                    if (toolIds[i] + 1 != toolIds[i + 1])
-                    {
-                        // Check if the empty space is a Multitool
-                        ShankModel shank = Multitools.Where(x => x.Id == (toolIds[i] + 1)).FirstOrDefault();
-                        if (shank == null)
-                        {
-                            // Set new id
-                            toolId = toolIds[i] + 1;
-                            i = toolIds.Count; // Exit
-                        }
-                    }
-                }
-
-                tool.Id = toolId;
+                tool.Id = GetNextToolId();
 
                 //Create Tools
                 string[] piArgs = new string[6];
@@ -2537,8 +2579,10 @@ namespace CMS_CORE.Siemens
 
                 PiSvc pi = new PiSvc(piArgs);
                 pi.Start();
-
-                TOOLS_WUpdateTool(tool);
+                // Update new tool
+                CmsError cmsError = TOOLS_WUpdateTool(tool);
+                if (cmsError.IsError())
+                    return cmsError;
 
                 SiemensEdgesConfiguration toolEdgesConfig = new SiemensEdgesConfiguration();
                 List<EdgeConfigModel> toolTypeConfig = toolEdgesConfig.EdgesConfig[tool.ToolType];
@@ -2570,9 +2614,69 @@ namespace CMS_CORE.Siemens
 
         public override CmsError TOOLS_WAddShank(ref ShankModel shank)
         {
+            try
+            {
+                if (shank.Name.Count() > 32)
+                    shank.Name = shank.Name.Substring(0, 32);
+
+                if (Multitools.Count >= MAX_MULTITOOLS_NUMBER)
+                    return INCORRECT_PARAMETERS_ERROR;
+
+                shank.Id = GetNextToolId();
+
+                //Create Shank with NC Pi service
+                string[] piArgs = new string[8];
+                piArgs[0] = "/NC";
+                piArgs[1] = "401";
+                piArgs[2] = shank.Name.Trim().PadRight(32);
+                piArgs[3] = "-0001"; // Reserved
+                piArgs[4] = "00000";  // "00000" or “-0001” -> Nc choice / “00001” not allowed
+                piArgs[5] = "002"; // From "002" to "$MN_MAX_TOOLS_PER_MULTITOOL" // 001 not allowed
+                piArgs[6] = "1"; // “1”..”3” tipo di riconoscimento distanza tra utensili nel multitool
+                piArgs[7] = "_N_TMCRMT";
+
+                // PI create command
+                PiSvc pi = new PiSvc(piArgs);
+                pi.Start();
+
+                // Update data
+                CmsError cmsError = TOOLS_WUpdateShank(ref shank);
+                if (cmsError.IsError())
+                    return cmsError;
+            }
+            catch (Exception ex)
+            {
+                return ManageException(ex);
+            }
+
             return NO_ERROR;
         }
 
+        private int GetNextToolId()
+        {
+            // Get tool ids
+            List<int> toolIds = ToolTableData.Select(x => x.Id).ToList();
+            // Sort tools ids array
+            toolIds.Sort((x, y) => x.CompareTo(y));
+
+            for (int i = 0; i <= toolIds.Count; i++)
+            {
+                // If next id is different than previus + 1, there is an empty space
+                if (toolIds[i] + 1 != toolIds[i + 1])
+                {
+                    // Check if the empty space is a Multitool
+                    ShankModel shank = Multitools.Where(x => x.Id == (toolIds[i] + 1)).FirstOrDefault();
+                    if (shank == null)
+                    {
+                        // Set new id
+                        return toolIds[i] + 1;
+                    }
+                }
+            }
+
+            return 1;
+        }
+
         public override CmsError TOOLS_WUpdateFamilyData(string oldName, string newName)
         {
             return NO_ERROR;
@@ -2589,47 +2693,19 @@ namespace CMS_CORE.Siemens
             {
                 // TC_TP2
                 DataSvc dataSvc = new DataSvc();
-                Item item = new Item("/Tool/Data/toolIdent[" + tool.Id + "]") { Value = tool.FamilyName };
-                dataSvc.Write(item);
-
-                // TC_TP3
-                item = new Item() { Path = "/Tool/Data/toolsize_left[" + tool.Id + "]", Value = tool.LeftSize };
-                dataSvc.Write(item);
-
-                // TC_TP4
-                item = new Item() { Path = "/Tool/Data/toolsize_right[" + tool.Id + "]", Value = tool.RightSize };
-                dataSvc.Write(item);
-
-                // TC_TP7
-                item = new Item() { Path = "/Tool/Data/toolplace_spec[" + tool.Id + "]", Value = tool.MagazinePositionType };
-                dataSvc.Write(item);
-
-                // TC_TP8
+                // Create status byte from bit array
                 BitArray bitArray = new BitArray(new bool[] { tool.IsActive, tool.IsEnabled, tool.IsInhibited, tool.IsMeasured, tool.PreAlarm, tool.InChangeTool, tool.InFixedPlace, tool.IsInUse });
                 int[] array = new int[1];
                 bitArray.CopyTo(array, 0);
 
-                item = new Item() { Path = "/Tool/Data/toolStateL[" + tool.Id + "]", Value = array[0] };
-                dataSvc.Write(item);
+                // Read tool info ( rotation, cooling etc...)
+                Item toolInfo = new Item("/Tool/Compensation/edgeData[c" + tool.Id + ",25]");
+                dataSvc.Read(toolInfo);
+                int val = Convert.ToInt32(toolInfo.Value);
 
-                // TC_TP9
-                item = new Item() { Path = "/Tool/Data/toolMon[" + tool.Id + "]", Value = (int)tool.LifeType, };
-                dataSvc.Write(item);
+                bool clockwhise = false, counterClockwhise = false;
 
-                // EdgesData
-                // TC_DP1
-                item = new Item() { Path = "/Tool/Compensation/edgeData[c" + tool.Id + ",1]", Value = tool.ToolType };
-                dataSvc.Write(item);
-
-                // TC_DP25
-                item = new Item("/Tool/Compensation/edgeData[c" + tool.Id + ",25]");
-                dataSvc.Read(item);
-                int val = Convert.ToInt32(item.Value);
-
-                bool clockwhise = false;
-                bool counterClockwhise = false;
-
-                // Convert rotation data
+                // Convert rotation into boolean
                 switch (tool.Rotation)
                 {
                     case ROTATION.CLOCKWHISE:
@@ -2641,21 +2717,38 @@ namespace CMS_CORE.Siemens
                         clockwhise = false;
                         counterClockwhise = true;
                         break;
-
-                    default:
-                        clockwhise = false;
-                        counterClockwhise = false;
-                        break;
                 }
+
                 // Set rotation data
                 val = SetBitValue(val, clockwhise, 9);
                 val = SetBitValue(val, counterClockwhise, 10);
                 // Set cooling
                 val = SetBitValue(val, tool.Cooling1, 11);
                 val = SetBitValue(val, tool.Cooling2, 12);
-                // Write
-                item.Value = val;
-                dataSvc.Write(item);
+
+                toolInfo.Value = val;
+
+                List<Item> items = new List<Item>()
+                {
+                    // TC_TP2
+                    new Item("/Tool/Data/toolIdent[" + tool.Id + "]") { Value = tool.FamilyName },
+                    // TC_TP3
+                    new Item() { Path = "/Tool/Data/toolsize_left[" + tool.Id + "]", Value = tool.LeftSize },
+                    // TC_TP4
+                    new Item() { Path = "/Tool/Data/toolsize_right[" + tool.Id + "]", Value = tool.RightSize },
+                    // TC_TP7
+                    new Item() { Path = "/Tool/Data/toolplace_spec[" + tool.Id + "]", Value = tool.MagazinePositionType },
+                    // TC_TP8
+                    new Item() { Path = "/Tool/Data/toolStateL[" + tool.Id + "]", Value = array[0] },
+                    // TC_TP9
+                    new Item() { Path = "/Tool/Data/toolMon[" + tool.Id + "]", Value = (int)tool.LifeType, },
+                    // TC_DP1
+                    new Item() { Path = "/Tool/Compensation/edgeData[c" + tool.Id + ",1]", Value = tool.ToolType },
+                    // TC_DP25
+                    { toolInfo }
+                };
+
+                dataSvc.Write(items.ToArray());
             }
             catch (Exception ex)
             {
@@ -2686,11 +2779,37 @@ namespace CMS_CORE.Siemens
             {
                 return ManageException(ex);
             }
+
             return NO_ERROR;
         }
 
         public override CmsError TOOLS_WDeleteShank(int id)
         {
+            // Find if exists
+            var multitool = Multitools.Where(x => x.Id == id).FirstOrDefault();
+            if (multitool == null)
+                return INCORRECT_PARAMETERS_ERROR;
+
+            try
+            {
+                // Create string parameters
+                string[] piArgs = new string[7];
+                piArgs[0] = "/NC";
+                piArgs[1] = "401";
+                piArgs[2] = "".PadRight(32);
+                piArgs[3] = "00000";
+                piArgs[4] = id.ToString().PadLeft(5, '0');  // Tool ID (> 00000)
+                piArgs[5] = "1";  // 0 No delete childs, 1 delete childs
+                piArgs[6] = "_N_TMDLMT";
+                // Start NC delete command
+                PiSvc pi = new PiSvc(piArgs);
+                pi.Start();
+            }
+            catch (Exception ex)
+            {
+                return ManageException(ex);
+            }
+
             return NO_ERROR;
         }
 
@@ -2772,31 +2891,34 @@ namespace CMS_CORE.Siemens
                 // Get config for current tool type
                 List<EdgeConfigModel> toolTypeConfig = toolEdgesConfig.EdgesConfig[tool.ToolType];
                 DataSvc dataSvc = new DataSvc();
-                Item item;
+                List<Item> items = new List<Item>();
+                int edgeOffset = (edge.Id - 1) * 9;
                 switch (tool.LifeType)
                 {
                     case SIEMENS_LIFE_TYPE.TIME:
                         {
-                            item = new Item() { Path = "/Tool/Supervision/data" };
-
+                            items.Add(new Item() { Path = string.Format("/Tool/Supervision/data[c{0}, {1}]", tool.Id, edgeOffset + 1), Value = edge.PreAlmLife});
+                            items.Add(new Item() { Path = string.Format("/Tool/Supervision/data[c{0}, {1}]", tool.Id, edgeOffset + 2), Value = edge.NominalLife });
+                            items.Add(new Item() { Path = string.Format("/Tool/Supervision/data[c{0}, {1}]", tool.Id, edgeOffset + 5), Value = edge.ResidualLife });
                         }
                         break;
                     case SIEMENS_LIFE_TYPE.COUNT:
                         {
-
+                            items.Add(new Item() { Path = string.Format("/Tool/Supervision/data[c{0}, {1}]", tool.Id, edgeOffset + 3), Value = edge.PreAlmLife });
+                            items.Add(new Item() { Path = string.Format("/Tool/Supervision/data[c{0}, {1}]", tool.Id, edgeOffset + 4), Value = edge.NominalLife });
+                            items.Add(new Item() { Path = string.Format("/Tool/Supervision/data[c{0}, {1}]", tool.Id, edgeOffset + 6), Value = edge.ResidualLife });
                         }
                         break;
                 }
-                
                 foreach (EdgeConfigModel conf in toolTypeConfig)
                 {
                     if (edge.EdgeAdditionalParams.ContainsKey(conf.Name))
                     {
-                        var paramId = Regex.Match("$TC_DP2[", @"\d+").Value;
-                        item = new Item() { Path = "/Tool/Compensation/edgeData[c" + tool.Id + ", " + paramId + "]", Value = tool.RightSize };
-                        dataSvc.Write(item);
+                        items.Add(new Item() { Path = string.Format("/Tool/Compensation/edgeData[c{0}, {1}]", edge.Id, edgeOffset + conf.Number), Value = edge.EdgeAdditionalParams[conf.Name] });
                     }
                 }
+
+                dataSvc.Write(items.ToArray());
             }
             catch (Exception ex)
             {
@@ -2809,30 +2931,27 @@ namespace CMS_CORE.Siemens
         {
             try
             {
-                // TC_MTP2
                 DataSvc dataSvc = new DataSvc();
-                Item item = new Item("/Tool/MT/multitoolIdent[" + shank.Id + "]") { Value = shank.Name };
-                dataSvc.Write(item);
-
-                // TC_MTP3
-                item = new Item() { Path = "/Tool/MT/multitoolsize_left[" + shank.Id + "]", Value = shank.LeftSize };
-                dataSvc.Write(item);
-
-                // TC_MTP4
-                item = new Item() { Path = "/Tool/MT/multitoolsize_right[" + shank.Id + "]", Value = shank.RightSize };
-                dataSvc.Write(item);
-
-                // TC_TMP7
-                item = new Item() { Path = "/Tool/MT/multitoolplace_spec[" + shank.Id + "]", Value = shank.MagazinePositionType };
-                dataSvc.Write(item);
-
-                // TC_MTP8
+                // Set status byte
                 BitArray bitArray = new BitArray(new bool[] { false, shank.IsEnabled, shank.IsInhibited, false, false, shank.InChangeTool, shank.InFixedPlace, shank.InUse });
                 int[] array = new int[1];
                 bitArray.CopyTo(array, 0);
 
-                item = new Item() { Path = "/Tool/MT/multitoolStateL[" + shank.Id + "]", Value = array[0] };
-                dataSvc.Write(item);
+                List<Item> items = new List<Item>()
+                {                
+                    // TC_MTP2
+                    new Item("/Tool/MT/multitoolIdent[" + shank.Id + "]") { Value = shank.Name },
+                    // TC_MTP3
+                    new Item() { Path = "/Tool/MT/multitoolsize_left[" + shank.Id + "]", Value = shank.LeftSize },
+                    // TC_MTP4
+                    new Item() { Path = "/Tool/MT/multitoolsize_right[" + shank.Id + "]", Value = shank.RightSize },
+                    // TC_TMP7
+                    new Item() { Path = "/Tool/MT/multitoolplace_spec[" + shank.Id + "]", Value = shank.MagazinePositionType },
+                    // TC_MTP8
+                    new Item() { Path = "/Tool/MT/multitoolStateL[" + shank.Id + "]", Value = array[0] }
+                };
+
+                dataSvc.Write(items.ToArray());
             }
             catch (Exception ex)
             {
diff --git a/CMS_CORE_Library/Siemens/SiemensEdgesConfigurations.cs b/CMS_CORE_Library/Siemens/SiemensEdgesConfigurations.cs
index 2f029a5..cd7a483 100644
--- a/CMS_CORE_Library/Siemens/SiemensEdgesConfigurations.cs
+++ b/CMS_CORE_Library/Siemens/SiemensEdgesConfigurations.cs
@@ -10,430 +10,430 @@ namespace CMS_CORE_Library.Siemens
             {
                 100, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 110, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 111, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "cornerRadius", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "cornerRadius", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 120, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 121, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34}
                 }
             },
             {
                 130, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "geomLenght1", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "geomLenght2", Path = "$TC_DP4["},
-                    new EdgeConfigModel{Name = "geomLenght3", Path = "$TC_DP5["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "geomDeltaLenght1", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "geomDeltaLenght2", Path = "$TC_DP13["},
-                    new EdgeConfigModel{Name = "geomDeltaLenght3", Path = "$TC_DP14["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "adapterLenght1", Path = "$TC_DP21["},
-                    new EdgeConfigModel{Name = "adapterLenght2", Path = "$TC_DP22["},
-                    new EdgeConfigModel{Name = "adapterLenght3", Path = "$TC_DP23["},
-                    new EdgeConfigModel{Name = "v", Path = "$TC_DPV["},
-                    new EdgeConfigModel{Name = "vector1", Path = "$TC_DPV3["},
-                    new EdgeConfigModel{Name = "vector2", Path = "$TC_DPV4["},
-                    new EdgeConfigModel{Name = "vector3", Path = "$TC_DPV5["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "geomLenght1", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "geomLenght2", Path = "$TC_DP4[", Number = 4},
+                    new EdgeConfigModel{ Name = "geomLenght3", Path = "$TC_DP5[", Number = 5},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "geomDeltaLenght1", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "geomDeltaLenght2", Path = "$TC_DP13[", Number = 13},
+                    new EdgeConfigModel{ Name = "geomDeltaLenght3", Path = "$TC_DP14[", Number = 14},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "adapterLenght1", Path = "$TC_DP21[", Number = 21},
+                    new EdgeConfigModel{ Name = "adapterLenght2", Path = "$TC_DP22[", Number = 22},
+                    new EdgeConfigModel{ Name = "adapterLenght3", Path = "$TC_DP23[", Number = 23},
+                    new EdgeConfigModel{ Name = "v", Path = "$TC_DPV[", Number = 27},
+                    new EdgeConfigModel{ Name = "vector1", Path = "$TC_DPV3[", Number = 28},
+                    new EdgeConfigModel{ Name = "vector2", Path = "$TC_DPV4[", Number = 29},
+                    new EdgeConfigModel{ Name = "vector3", Path = "$TC_DPV5[", Number = 30},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 131, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "geomLenght1", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "geomLenght2", Path = "$TC_DP4["},
-                    new EdgeConfigModel{Name = "geomLenght3", Path = "$TC_DP5["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "cornerRadius", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "geomDeltaLenght1", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "geomDeltaLenght2", Path = "$TC_DP13["},
-                    new EdgeConfigModel{Name = "geomDeltaLenght3", Path = "$TC_DP14["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "adapterLenght1", Path = "$TC_DP21["},
-                    new EdgeConfigModel{Name = "adapterLenght2", Path = "$TC_DP22["},
-                    new EdgeConfigModel{Name = "adapterLenght3", Path = "$TC_DP23["},
-                    new EdgeConfigModel{Name = "v", Path = "$TC_DPV["},
-                    new EdgeConfigModel{Name = "vector1", Path = "$TC_DPV3["},
-                    new EdgeConfigModel{Name = "vector2", Path = "$TC_DPV4["},
-                    new EdgeConfigModel{Name = "vector3", Path = "$TC_DPV5["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "geomLenght1", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "geomLenght2", Path = "$TC_DP4[", Number = 4},
+                    new EdgeConfigModel{ Name = "geomLenght3", Path = "$TC_DP5[", Number = 5},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "cornerRadius", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "geomDeltaLenght1", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "geomDeltaLenght2", Path = "$TC_DP13[", Number = 13},
+                    new EdgeConfigModel{ Name = "geomDeltaLenght3", Path = "$TC_DP14[", Number = 14},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "adapterLenght1", Path = "$TC_DP21[", Number = 21},
+                    new EdgeConfigModel{ Name = "adapterLenght2", Path = "$TC_DP22[", Number = 22},
+                    new EdgeConfigModel{ Name = "adapterLenght3", Path = "$TC_DP23[", Number = 23},
+                    new EdgeConfigModel{ Name = "v", Path = "$TC_DPV[", Number = 27},
+                    new EdgeConfigModel{ Name = "vector1", Path = "$TC_DPV3[", Number = 28},
+                    new EdgeConfigModel{ Name = "vector2", Path = "$TC_DPV4[", Number = 29},
+                    new EdgeConfigModel{ Name = "vector3", Path = "$TC_DPV5[", Number = 30},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 140,  new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "outsideRadius", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "ToolAngle", Path = "$TC_DP11["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "outsideRadius", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "ToolAngle", Path = "$TC_DP11[", Number = 11},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 145, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 150, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "Width", Path = "$TC_DP9[" },
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15[" },
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "Width", Path = "$TC_DP9[", Number = 9 },
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15 },
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 151, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "Width", Path = "$TC_DP9[" },
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15[" },
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "Width", Path = "$TC_DP9[", Number = 9 },
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15 },
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 155, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "taperAngle", Path = "$TC_DP11[" },
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "taperAngle", Path = "$TC_DP11[", Number = 11 },
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 156, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "cornerRadius", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "taperAngle", Path = "$TC_DP11[" },
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "cornerRadius", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "taperAngle", Path = "$TC_DP11[", Number = 11 },
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 157, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "taperAngle", Path = "$TC_DP11[" },
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "taperAngle", Path = "$TC_DP11[", Number = 11},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             {
                 160,  new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "teeth", Path = "$TC_DPNT[" }
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "teeth", Path = "$TC_DPNT[", Number = 34 }
                 }
             },
             //////// 200 - 300
             {
                 200, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{ Name = "tipAngle", Path = "$TC_DP24["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "tipAngle", Path = "$TC_DP24[", Number = 24}
                 }
             },
             {
                 205, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 210, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 220, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{ Name = "tipAngle", Path = "$TC_DP24["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "tipAngle", Path = "$TC_DP24[", Number = 24}
                 }
             },
             {
                 230, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{ Name = "tipAngle", Path = "$TC_DP24["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "tipAngle", Path = "$TC_DP24[", Number = 24}
                 }
             },
             {
                 231, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 240, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "pitch", Path = "$TC_DP9["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "pitch", Path = "$TC_DP9[", Number = 9},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15}
                 }
             },
             {
                 241, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 242, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 250, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             ///////// 700 - 900
             {
                 700, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "geomLenght1", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "geomLenght2", Path = "$TC_DP4["},
-                    new EdgeConfigModel{Name = "geomLenght3", Path = "$TC_DP5["},
-                    new EdgeConfigModel{Name = "diameter", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "geomSlotWidth", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "geomPrjection", Path = "$TC_DP8["},
-                    new EdgeConfigModel{Name = "geomWearLenght1", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "geomWearLenght2", Path = "$TC_DP13["},
-                    new EdgeConfigModel{Name = "geomWearLenght3", Path = "$TC_DP14["},
-                    new EdgeConfigModel{Name = "WearDiameter", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "WearSlotWdth", Path = "$TC_DP16["},
-                    new EdgeConfigModel{Name = "WearGeomPrjection", Path = "$TC_DP17["},
-                    new EdgeConfigModel{Name = "adapterLenght1", Path = "$TC_DP21["},
-                    new EdgeConfigModel{Name = "adapterLenght2", Path = "$TC_DP22["},
-                    new EdgeConfigModel{Name = "adapterLenght3", Path = "$TC_DP23["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "geomLenght1", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "geomLenght2", Path = "$TC_DP4[", Number = 4},
+                    new EdgeConfigModel{ Name = "geomLenght3", Path = "$TC_DP5[", Number = 5},
+                    new EdgeConfigModel{ Name = "diameter", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "geomSlotWidth", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "geomPrjection", Path = "$TC_DP8[", Number = 8},
+                    new EdgeConfigModel{ Name = "geomWearLenght1", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "geomWearLenght2", Path = "$TC_DP13[", Number = 13},
+                    new EdgeConfigModel{ Name = "geomWearLenght3", Path = "$TC_DP14[", Number = 14},
+                    new EdgeConfigModel{ Name = "WearDiameter", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "WearSlotWdth", Path = "$TC_DP16[", Number = 16},
+                    new EdgeConfigModel{ Name = "WearGeomPrjection", Path = "$TC_DP17[", Number = 17},
+                    new EdgeConfigModel{ Name = "adapterLenght1", Path = "$TC_DP21[", Number = 21},
+                    new EdgeConfigModel{ Name = "adapterLenght2", Path = "$TC_DP22[", Number = 22},
+                    new EdgeConfigModel{ Name = "adapterLenght3", Path = "$TC_DP23[", Number = 23}
                 }
             },
             {
                 710, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 711, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 712, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "corrAngle", Path = "$TC_DP10["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "corrAngle", Path = "$TC_DP10[", Number = 10},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 713, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "geomLenght1", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "geomLenght2", Path = "$TC_DP4["},
-                    new EdgeConfigModel{Name = "geomLenght3", Path = "$TC_DP5["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "boomLenght", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "corrAngle", Path = "$TC_DP10["},
-                    new EdgeConfigModel{Name = "geomWearLenght1", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "geomWearLenght2", Path = "$TC_DP13["},
-                    new EdgeConfigModel{Name = "geomWearLenght3", Path = "$TC_DP14["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "adapterLenght1", Path = "$TC_DP21["},
-                    new EdgeConfigModel{Name = "adapterLenght2", Path = "$TC_DP22["},
-                    new EdgeConfigModel{Name = "adapterLenght3", Path = "$TC_DP23["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "geomLenght1", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "geomLenght2", Path = "$TC_DP4[", Number = 4},
+                    new EdgeConfigModel{ Name = "geomLenght3", Path = "$TC_DP5[", Number = 5},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "boomLenght", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "corrAngle", Path = "$TC_DP10[", Number = 10},
+                    new EdgeConfigModel{ Name = "geomWearLenght1", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "geomWearLenght2", Path = "$TC_DP13[", Number = 13},
+                    new EdgeConfigModel{ Name = "geomWearLenght3", Path = "$TC_DP14[", Number = 14},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "adapterLenght1", Path = "$TC_DP21[", Number = 21},
+                    new EdgeConfigModel{ Name = "adapterLenght2", Path = "$TC_DP22[", Number = 22},
+                    new EdgeConfigModel{ Name = "adapterLenght3", Path = "$TC_DP23[", Number = 23}
                 }
             },
             {
                 714, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "geomLenght1", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "geomLenght2", Path = "$TC_DP4["},
-                    new EdgeConfigModel{Name = "geomLenght3", Path = "$TC_DP5["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "ballRadius", Path = "$TC_DP7["},
-                    new EdgeConfigModel{Name = "corrAngle", Path = "$TC_DP10["},
-                    new EdgeConfigModel{Name = "geomWearLenght1", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "geomWearLenght2", Path = "$TC_DP13["},
-                    new EdgeConfigModel{Name = "geomWearLenght3", Path = "$TC_DP14["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "adapterLenght1", Path = "$TC_DP21["},
-                    new EdgeConfigModel{Name = "adapterLenght2", Path = "$TC_DP22["},
-                    new EdgeConfigModel{Name = "adapterLenght3", Path = "$TC_DP23["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "geomLenght1", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "geomLenght2", Path = "$TC_DP4[", Number = 4},
+                    new EdgeConfigModel{ Name = "geomLenght3", Path = "$TC_DP5[", Number = 5},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "ballRadius", Path = "$TC_DP7[", Number = 7},
+                    new EdgeConfigModel{ Name = "corrAngle", Path = "$TC_DP10[", Number = 10},
+                    new EdgeConfigModel{ Name = "geomWearLenght1", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "geomWearLenght2", Path = "$TC_DP13[", Number = 13},
+                    new EdgeConfigModel{ Name = "geomWearLenght3", Path = "$TC_DP14[", Number = 14},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "adapterLenght1", Path = "$TC_DP21[", Number = 21},
+                    new EdgeConfigModel{ Name = "adapterLenght2", Path = "$TC_DP22[", Number = 22},
+                    new EdgeConfigModel{ Name = "adapterLenght3", Path = "$TC_DP23[", Number = 23}
                 }
             },
             {
                 725, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "geomLenght1", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "geomLenght2", Path = "$TC_DP4["},
-                    new EdgeConfigModel{Name = "geomLenght3", Path = "$TC_DP5["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "corrAngle", Path = "$TC_DP10["},
-                    new EdgeConfigModel{Name = "geomWearLenght1", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "geomWearLenght2", Path = "$TC_DP13["},
-                    new EdgeConfigModel{Name = "geomWearLenght3", Path = "$TC_DP14["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["},
-                    new EdgeConfigModel{Name = "adapterLenght1", Path = "$TC_DP21["},
-                    new EdgeConfigModel{Name = "adapterLenght2", Path = "$TC_DP22["},
-                    new EdgeConfigModel{Name = "adapterLenght3", Path = "$TC_DP23["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "geomLenght1", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "geomLenght2", Path = "$TC_DP4[", Number = 4},
+                    new EdgeConfigModel{ Name = "geomLenght3", Path = "$TC_DP5[", Number = 5},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "corrAngle", Path = "$TC_DP10[", Number = 10},
+                    new EdgeConfigModel{ Name = "geomWearLenght1", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "geomWearLenght2", Path = "$TC_DP13[", Number = 13},
+                    new EdgeConfigModel{ Name = "geomWearLenght3", Path = "$TC_DP14[", Number = 14},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
+                    new EdgeConfigModel{ Name = "adapterLenght1", Path = "$TC_DP21[", Number = 21},
+                    new EdgeConfigModel{ Name = "adapterLenght2", Path = "$TC_DP22[", Number = 22},
+                    new EdgeConfigModel{ Name = "adapterLenght3", Path = "$TC_DP23[", Number = 23}
                 }
             },
             {
                 730, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
             {
                 900, new List<EdgeConfigModel>()
                 {
-                    new EdgeConfigModel{Name = "cuttingEdge", Path = "$TC_DP2["},
-                    new EdgeConfigModel{Name = "lenght", Path = "$TC_DP3["},
-                    new EdgeConfigModel{Name = "radius", Path = "$TC_DP6["},
-                    new EdgeConfigModel{Name = "wearLenght", Path = "$TC_DP12["},
-                    new EdgeConfigModel{Name = "wearRadius", Path = "$TC_DP15["}
+                    new EdgeConfigModel{ Name = "cuttingEdge", Path = "$TC_DP2[", Number = 2},
+                    new EdgeConfigModel{ Name = "lenght", Path = "$TC_DP3[", Number = 3},
+                    new EdgeConfigModel{ Name = "radius", Path = "$TC_DP6[", Number = 6},
+                    new EdgeConfigModel{ Name = "wearLenght", Path = "$TC_DP12[", Number = 12},
+                    new EdgeConfigModel{ Name = "wearRadius", Path = "$TC_DP15[", Number = 15},
                 }
             },
         };