Imports EgtUILib
Imports EgtWPFLib
Imports System.Reflection
Imports System.Globalization

Public Class CadCutPageUC

   ' Riferimenti a pagine
   Private m_MainWindow As MainWindow = Application.Current.MainWindow
   Private m_CurrProjPage As CurrentProjectPageUC

   ' Dichiarazione delle Page UserControl
   Friend WithEvents m_NestPage As NestPageUC
   Friend m_SplitPage As SplitPageUC
   Friend m_MoveRawPartPage As MoveRawPartPage

   ' Riferimento alla finestra di salvataggio con nome
   Friend m_SaveNameWD As SaveNameWD

   ' Variabile che indica la modalità
   Friend m_MovePartPage As MovePartsPages

   ' Oggetto di gestione della macchina fotografica
   Friend m_Camera As New Camera

   ' Elenco pagine interne a cadcutpage
   Friend Enum MovePartsPages As Integer
      Nest
      Split
      MoveRawPart
   End Enum

   Private Sub CadCutPage_Initialized(sender As Object, e As EventArgs)

      ' Creazione delle Page UserControl
      m_NestPage = New NestPageUC
      m_SplitPage = New SplitPageUC
      m_MoveRawPartPage = New MoveRawPartPage

      ' Posizionamento nella griglia delle Page UserControl
      m_NestPage.SetValue(Grid.RowSpanProperty, 3)
      m_NestPage.SetValue(Grid.ColumnSpanProperty, 2)
      m_SplitPage.SetValue(Grid.RowSpanProperty, 3)
      m_SplitPage.SetValue(Grid.ColumnSpanProperty, 3)
      m_MoveRawPartPage.SetValue(Grid.RowSpanProperty, 3)
      m_MoveRawPartPage.SetValue(Grid.ColumnSpanProperty, 3)

      ' Nascondo progress e label per messaggi
      PhotoProgress.Visibility = Windows.Visibility.Hidden

      ' Imposto i messaggi letti dal file dei messaggi
      SimulateBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
      WorkBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 2)           'Work - Lavora
      NewBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 3)
      LoadBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 4)
      SaveBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 5)
      SaveNameBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 6)
   End Sub

   Private Sub CadCutPage_Loaded(sender As Object, e As RoutedEventArgs)
      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
      ' Seleziono UserControl di apertura
      CadCutPageGrid.Children.Add(m_NestPage)
      m_MovePartPage = MovePartsPages.Nest
      'm_bNesting = True
      SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Split.png", UriKind.Relative))
      EgtZoom(ZM.ALL)
      ' Inizializzo gestore macchina fotografica
      m_Camera.Init()
   End Sub

   Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
      ' Se macchina fotografica abilitata, faccio una foto
      If m_Camera.GetCameraLink() Then
         If Not m_Camera.CameraClick() Then
            m_CurrProjPage.SetErrorMessage(EgtMsg(90313))    'Fotografia non riuscita
         End If
         ' Altrimenti lancio browser di immagini
      Else
         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_PhotoPage)
      End If
   End Sub

   Friend Sub PostPhoto(ByVal sPath As String)
      ' Carico la foto
      m_MainWindow.m_CurrentProjectPageUC.LoadPhoto(sPath)
      ' Aggiorno visualizzazione
      EgtZoom(ZM.ALL)
   End Sub

   Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
      m_MainWindow.m_CurrentProjectPageUC.CurrProjGrid.Visibility = Windows.Visibility.Hidden
      m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Remove(Me)
      m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
      m_MainWindow.m_ActivePage = MainWindow.Pages.RawPart
   End Sub

   Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
   End Sub

   Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
      m_MainWindow.m_ActivePage = MainWindow.Pages.Import
   End Sub

   Private Sub CadCutPage_Unloaded(sender As Object, e As RoutedEventArgs)
      ' Chiudo tutti gli UserControl attivi
      Select Case m_MovePartPage
         Case MovePartsPages.Nest
            CadCutPageGrid.Children.Remove(m_NestPage)
         Case MovePartsPages.Split
            CadCutPageGrid.Children.Remove(m_SplitPage)
         Case MovePartsPages.MoveRawPart
            CadCutPageGrid.Children.Remove(m_MoveRawPartPage)
      End Select
   End Sub

   Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
      Select Case m_MovePartPage
         Case MovePartsPages.Nest
            SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Nest.png", UriKind.Relative))
            CadCutPageGrid.Children.Remove(m_NestPage)
            CadCutPageGrid.Children.Add(m_SplitPage)
            m_MovePartPage = MovePartsPages.Split
            ' !!! Provvisorio : riparto da capo !!!
            ' Cancello tutte le lavorazioni
            EraseMachinings(GDB_ID.NULL)
            ' Reinserisco tutte le lavorazioni
            AddMachinings(GDB_ID.NULL, True, False)
            ' Aggiorno visualizzazione
            EgtDraw()
         Case MovePartsPages.Split
            SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Split.png", UriKind.Relative))
            CadCutPageGrid.Children.Remove(m_SplitPage)
            CadCutPageGrid.Children.Add(m_NestPage)
            m_MovePartPage = MovePartsPages.Nest
      End Select
   End Sub

   Private Sub NewBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewBtn.Click
      ' Se progetto modificato, chiedo se salvarlo
      If EgtGetModified() Then
         Dim SaveCurrProj As New EgtMsgBox(m_MainWindow, "", EgtMsg(MSG_EGTMSGBOX + 1), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
         Select Case SaveCurrProj.DialogResult
            Case 0    ' Annulla
               Return
            Case 1    ' Si
               m_MainWindow.m_CurrentProjectPageUC.SaveProject()
            Case 2    ' No
               ' Non devo fare alcunchè
         End Select
      End If
      ' Cancello progetto salvato con nome da file ini
      WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", m_MainWindow.GetIniFile())
      m_MainWindow.m_CurrentProjectPageUC.NewProject()
      EgtZoom(ZM.ALL)
   End Sub

   Private Sub LoadBtn_Click(sender As Object, e As RoutedEventArgs) Handles LoadBtn.Click
      ' Se progetto modificato, chiedo se salvarlo
      If EgtGetModified() Then
         Dim SaveCurrProj As New EgtMsgBox(m_MainWindow, "", EgtMsg(MSG_EGTMSGBOX + 1), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
         Select Case SaveCurrProj.DialogResult
            Case 0    ' Annulla
               Return
            Case 1    ' Si
               m_MainWindow.m_CurrentProjectPageUC.SaveNameProject()
               m_MainWindow.m_CurrentProjectPageUC.SaveProject()
            Case 2    ' No
               ' Non devo fare alcunchè
         End Select
      End If
      ' Passo alla pagina di apertura con preview
      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
      m_MainWindow.m_ActivePage = MainWindow.Pages.Open
   End Sub

   Friend Sub PostLoad(ByVal sCurrDir As String, sCurrFile As String)
      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
      If Not m_MainWindow.m_CurrentProjectPageUC.LoadProject(sCurrDir & "\" & sCurrFile) Then
         m_MainWindow.m_CurrentProjectPageUC.NewProject()
      Else
         ' Verifico se file salvato con nome guardando il nome della cartella in cui si trova
         Dim sSaveNameDir As String = String.Empty
         GetPrivateProfileString(S_GENERAL, K_SAVENAMEDIR, "", sSaveNameDir, m_MainWindow.GetIniFile())
         If sCurrDir = sSaveNameDir Then
            WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, sCurrFile.Substring(0, sCurrFile.Length - 4), m_MainWindow.GetIniFile())
            ' Salvo equivalente con indice
            m_MainWindow.m_CurrentProjectPageUC.SetNextProjectIndex()
            m_MainWindow.m_CurrentProjectPageUC.SaveProject()
         Else
            WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, String.Empty, m_MainWindow.GetIniFile())
         End If
      End If
      EgtZoom(ZM.ALL)
   End Sub

   Private Sub SaveBtn_Click(sender As Object, e As RoutedEventArgs) Handles SaveBtn.Click
      ' Recupero nome corrente
      Dim sCurrNameProj As String = String.Empty
      GetPrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", sCurrNameProj, m_MainWindow.GetIniFile())
      ' Se vuoto vado alla salva con nome
      If String.IsNullOrEmpty(sCurrNameProj) Then
         SaveNameBtn_Click(sender, e)
         Return
      End If
      ' Salvataggio con nome
      m_MainWindow.m_CurrentProjectPageUC.SaveNameProject()
      ' Slvataggio con numero ciclico
      m_MainWindow.m_CurrentProjectPageUC.SaveProject()
      EgtDraw()
   End Sub

   Private Sub SaveNameBtn_Click(sender As Object, e As RoutedEventArgs) Handles SaveNameBtn.Click
      m_SaveNameWD = New SaveNameWD(m_MainWindow)
      m_SaveNameWD.ShowDialog()
   End Sub

   Private Sub SimulateBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulateBtn.Click
      m_MainWindow.m_CurrentProjectPageUC.CurrProjGrid.Visibility = Windows.Visibility.Hidden
      m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_CadCutPageUC)
      m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
   End Sub

   Private Sub WorkBtn_Click(sender As Object, e As RoutedEventArgs) Handles WorkBtn.Click
      Dim bOk As Boolean = True
      ' Se non c'è ordine delle lavorazioni, ne faccio uno automatico
      If Not m_CurrProjPage.GetOrderMachiningFlag() Then
         bOk = SortAllMachinings()
         If bOk Then
            m_CurrProjPage.SetOrderMachiningFlag()
            Dim bModif As Boolean = TestAllMachiningsForStrict()
            If bModif Then
               m_CurrProjPage.SetWarningMessage(EgtMsg(90321))     'Ridotte alcune lavorazioni per evitare interferenze
            End If
         End If
      End If
      ' Disabilito impostazione modificato
      EgtDisableModified()
      ' Aggiorno le lavorazioni
      bOk = UpdateAllMachiningsToolpaths() And bOk
      ' Salvo il progetto con le lavorazioni
      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\MachProj.nge"
      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath)
      ' Genero file CNC (lancio anche se errore in precedenza)
      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\CadCut.xpi"
      bOk = EgtGenerate(sCncPath, "OmagCut") And bOk
      ' Ripristino come fase corrente quella iniziale
      EgtSetCurrPhase(1)
      ' Abilito impostazione modificato
      EgtEnableModified()
      ' Se errore in generazione, segnalo l'errore ed esco
      If Not bOk Then
         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
         Return
      End If
      ' Download programma (eventuali errori sono segnalati dalla funzione)
      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
         ' copio il progetto corrente come progetto in lavorazione
         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
      End If
   End Sub

End Class