Aggiunto comando per gestione ExecLua

- migliorati controlli per chiave di rete.

CadCuts/MoveRawPartPage.xaml

@@ -133,10 +133,14 @@
          </Button>
 
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
+         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
-         Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Grid Grid.Row="7" Grid.ColumnSpan="3">
+         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+
+            <Grid Grid.Row="7" Grid.ColumnSpan="3">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>
                <ColumnDefinition Width="1*"/>
@@ -155,9 +159,11 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="10*"/>
          </Grid.ColumnDefinitions>
-
+            <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
-
+            <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-      </Grid>
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+        </Grid>
 
    </Grid>
 

CadCuts/MoveRawPartPage.xaml.vb

@@ -11,8 +11,12 @@ Public Class MoveRawPartPage
    Private m_nAuxTabId As Integer = GDB_ID.NULL
    ' Fase corrente
    Private m_nCurrPhase As Integer = 0
+   ' Disposizione corrente
+   Private m_nCurrDisposition As Integer = GDB_ID.NULL
    ' Premuto Prev
    Private m_bPrev As Boolean = False
+   ' Pemuto Next
+   Private m_bToNext As Boolean = False
    ' Dati movimento
    Private m_dStep As Double = 0
    Private m_dRotation As Double = 0
@@ -27,7 +31,8 @@ Public Class MoveRawPartPage
    Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
-
+   ' Visibilità comando Scrap
+   Private m_ScrapsVisibility As Visibility = Visibility.Visible
    Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
 
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
@@ -35,12 +40,15 @@ Public Class MoveRawPartPage
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
+      ScrapsBtn.Content = "Add Scraps"
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_SplitPage = m_MainWindow.m_CadCutPageUC.m_SplitPage
       m_bActive = True
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Leggo tipo movimento grezzi
       m_bByHand = (GetVacuumType() = 0 Or
                    Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.AUTO_MANIP) Or
@@ -57,40 +65,47 @@ Public Class MoveRawPartPage
       m_SplitPage.GetEnabledCuts(Cuts)
       ' Fase precedente
       Dim nPrevPhase As Integer = EgtGetCurrPhase()
+      ' Creo nuova fase, eseguo spezzatura grezzi e vi sposto le lavorazioni
+      Dim vNewRaws As New List(Of Integer)
       If Not m_SplitPage.m_bShow Then
-         ' Creo nuova fase, eseguo spezzatura grezzi e vi sposto le lavorazioni
-         Dim vNewRaws As New List(Of Integer)
          SplitRawParts(nPrevPhase, Cuts, vNewRaws)
       Else
          EgtSetCurrPhase(nPrevPhase + 1)
          HideAllMachinings()
       End If
       m_nCurrPhase = EgtGetCurrPhase()
+
+      '---------------------------- SCRAPS ----------------------------
+      ' gestione visualizzazione del comando "Scraps"
+      Dim ScrapsVisibility As Visibility = Visibility.Collapsed
+      ' verifico se licenza abilitat: m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SCRAPS)
+      If GetPrivateProfileInt(S_SCRAPS, K_ENABLESCRAPS, 0, m_MainWindow.GetIniFile()) <> 0 Then
+         ' leggo il direttorio in cui cercare il database delle lastre
+         Dim PhotDir As String = String.Empty
+         GetPrivateProfileString(S_SCRAPS, K_PHOTODIR, "", PhotDir, m_MainWindow.GetIniFile())
+         ' verifico che esista il file "OmagPHOTOVb.sqlite" nel direttorio inidicato
+         If System.IO.File.Exists(PhotDir.Trim & "\OmagPHOTODb.sqlite") Then
+            ScrapsVisibility = Visibility.Visible
+         End If
+      End If
+      ' verifico che siano stati generati dei nuovi grezzi
+      If vNewRaws.Count = 0 Then
+         ScrapsVisibility = Visibility.Collapsed
+      End If
+      ' aggiorno la grafica
+      m_ScrapsVisibility = ScrapsVisibility
+      If m_ScrapsVisibility <> Visibility.Visible Then
+         Grid.SetColumnSpan(RemovePartBtn, 3)
+      Else
+         Grid.SetColumnSpan(RemovePartBtn, 2)
+      End If
+      '---------------------------- SCRAPS ----------------------------
+
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
       If m_SplitPage.m_bOnAuxTab Then
-         m_nAuxTabId = EgtGetTableId(AUX_TAB)
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente
-         ' Visualizzo tavolo ausiliario
+         SetAuxTabInCurrDisposition()
-         Dim bOldEnMod As Boolean = EgtGetEnableModified()
+         ' altrimenti, aggiorno visualizzazione
-         If bOldEnMod Then EgtDisableModified()
-         EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
-         If bOldEnMod Then EgtEnableModified()
-         ' Se definizione movimenti
-         If Not m_SplitPage.m_bShow Then
-            ' Area tavolo ausiliario
-            Dim b3AuxTab As New BBox3d
-            EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
-            ' Area tavolo principale
-            Dim b3Tab As New BBox3d
-            EgtGetTableArea(1, b3Tab)
-            ' Imposto offset su tavolo principale per includere anche il secondario
-            Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
-            Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
-            Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
-            Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
-            EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
-         End If
-         EgtZoom(ZM.ALL)
-      ' altrimenti, aggiorno visualizzazione
       Else
          EgtDraw()
       End If
@@ -128,14 +143,14 @@ Public Class MoveRawPartPage
                ' Distanza iniziale
                m_dCurrDist = 0
             End If
-         ' Non dovrebbe mai accadere, ma inizializzo con default
+            ' Non dovrebbe mai accadere, ma inizializzo con default
          Else
             m_vtDir = Vector3d.Y_AX()
             m_ptMid = Point3d.ORIG()
             m_dOrigDist = 0
             m_dCurrDist = 0
          End If
-      ' Altrimenti movimento con ventose
+         ' Altrimenti movimento con ventose
       Else
          m_bRemovedRaw = False
          m_bRawWithCups = False
@@ -149,6 +164,9 @@ Public Class MoveRawPartPage
             GetMoveInfoInDisposition(nDispId, m_RawMoveDataList)
          End If
       End If
+
+      ' aggiorno il messaggio del comando per gestire gli sfridi
+      VerifyIsNewScrap(m_CurrRawOnVacuum)
       ' Aggiorno interfaccia per taglio perpendicolare
       If m_bByHand Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -164,8 +182,10 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-      ' altrimenti per movimento con ventose
+         ScrapsBtn.Visibility = m_ScrapsVisibility
+         ' altrimenti per movimento con ventose
       ElseIf Not m_SplitPage.m_bOnAuxTab Then
          UpBtn.Visibility = Windows.Visibility.Visible
          LeftBtn.Visibility = Windows.Visibility.Visible
@@ -180,8 +200,10 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-      ' altrimenti per movimento finale dei pezzi
+         ScrapsBtn.Visibility = m_ScrapsVisibility
+         ' altrimenti per movimento finale dei pezzi
       Else
          UpBtn.Visibility = Windows.Visibility.Hidden
          LeftBtn.Visibility = Windows.Visibility.Hidden
@@ -196,14 +218,45 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Visible
          BottomLBtn.Visibility = Windows.Visibility.Visible
          BottomRBtn.Visibility = Windows.Visibility.Visible
+         PauseBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
+         ScrapsBtn.Visibility = Windows.Visibility.Hidden
       End If
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
       ' Abilitazione bottone modifica
       ModifyBtn.IsEnabled = m_SplitPage.m_bShow
       ' gestione abilitazione altri bottoni
       EnableButtons()
    End Sub
 
+   Private Sub SetAuxTabInCurrDisposition()
+      ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
+      m_nAuxTabId = EgtGetTableId(AUX_TAB)
+      ' Visualizzo tavolo ausiliario
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
+      If bOldEnMod Then EgtEnableModified()
+      ' Se definizione movimenti
+      If Not m_SplitPage.m_bShow Then
+         ' Area tavolo ausiliario
+         Dim b3AuxTab As New BBox3d
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+         ' Area tavolo principale
+         Dim b3Tab As New BBox3d
+         EgtGetTableArea(1, b3Tab)
+         ' Imposto offset su tavolo principale per includere anche il secondario
+         Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
+         Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
+         Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
+         Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
+         EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
+      End If
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -232,17 +285,19 @@ Public Class MoveRawPartPage
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nId, nStat)
+            ' aggiorno il messaggio del bottone "Scrap" a seconda che il grezzo sia già uno scrap
+            VerifyIsNewScrap(nId)
             ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
                If VerifyCollisionWithOtherRawPart(nId) Then
-                  ' mantengo la selezione del pezzo
+                     ' mantengo la selezione del pezzo
-                  EgtSetStatus(nId, GDB_ST.SEL)
+                     EgtSetStatus(nId, GDB_ST.SEL)
-                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                     m_CurrProjPage.SetErrorMessage("Collisione pezzi")
-               Else
+                  Else
-                  ' Se con ventose, le nascondo
+                     ' Se con ventose, le nascondo
-                  If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+                     If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                End If
             Else
 
@@ -271,9 +326,9 @@ Public Class MoveRawPartPage
                   MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
                   Dim AverageDensity As Double = 2700
                   AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
-                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
-                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -316,6 +371,8 @@ Public Class MoveRawPartPage
 
    ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
    Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
       If nIdOnVacumm = GDB_ID.NULL Then Return False
       ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
       Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
@@ -347,6 +404,27 @@ Public Class MoveRawPartPage
       Return False
    End Function
 
+   Private Function VerifyIsNewScrap(nMyId As Integer) As Boolean
+      Dim nVal As Integer = 0
+      If EgtGetInfo(nMyId, K_ISNEWSCRAPS, nVal) Then
+         If nVal = 1 Or nVal = 2 Then
+            ' 1 → è stato definito come nuovo grezzo oppure, 2 → è stato definito come nuovo grezzo ed è stato inserito nel DB delle lastre
+            ScrapsBtn.Content = "Remove Scrap"
+            ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
+            Return True
+         ElseIf nVal = 3 Then
+            ' non è possibile rimuovere il grezzo in questa fase
+            ScrapsBtn.Content = "Defined as Scrap"
+            ScrapsBtn.IsEnabled = False
+            Return True
+         End If
+      End If
+      ' non è un nuovo grezzo
+      ScrapsBtn.Content = "Add Scrap"
+      ScrapsBtn.IsEnabled = True And Not m_SplitPage.m_bShow
+      Return False
+   End Function
+
 #Region "Move Up/Down/Left/Right"
 
    Private Sub UpBtn_Click(sender As Object, e As RoutedEventArgs) Handles UpBtn.Click
@@ -679,6 +757,29 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+   Private Sub ScrapsBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ScrapsBtn.Click
+      Dim nRawId As Integer = EgtGetFirstSelectedObj()
+      While nRawId <> GDB_ID.NULL
+         ' verifico che il grezzo non contenga dei pezzi (altrimenti non risulta selezionabile)
+         Dim nPartInRaw As Integer = EgtGetFirstPartInRawPart(nRawId)
+         If nPartInRaw = GDB_ID.NULL Then
+            If Not VerifyIsNewScrap(nRawId) Then
+               EgtSetInfo(nRawId, K_ISNEWSCRAPS, "1")
+            Else
+               EgtRemoveInfo(nRawId, K_ISNEWSCRAPS)
+            End If
+            ' aggiorno il contenuto del bottone
+            VerifyIsNewScrap(nRawId)
+         Else
+            ' coumico che il grezzo contiene un pezzo e quindi non può essere definito come grezzo
+            m_CurrProjPage.ClearMessage()
+            m_CurrProjPage.SetErrorMessage("Part inside raw!")
+         End If
+         ' passo al grezzo succesivo (NON dovrebbero esserci altri grezzi selezionabili contemporaneamente!)
+         nRawId = EgtGetNextSelectedObj()
+      End While
+   End Sub
+
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
       Dim dStep As Double
       If StringToLen(StepMoveTxBx.Text, dStep) Then
@@ -741,9 +842,12 @@ Public Class MoveRawPartPage
 
       ' ricavo l'angolo di posizionamento del grezzo/pezzo sulla tavola
       If Not DispositionRawOnTable(nRawId, dAngRaw, AngRotList) Then Return
+      Dim bb3dRaw As New BBox3d
+      EgtGetRawPartBBox(nRawId, bb3dRaw)
+      Dim ForceToRotate As Boolean = bb3dRaw.DimX < bb3dRaw.DimY
 
       ' provo a verificare di poter depositare il pezzo (senza applicare delle rotazioni)
-      If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
+      If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Or ForceToRotate Then
          ' se sono impostati degli step di rotazione
          If AngRotList.Count > 0 Then
             Dim bOkRotate As Boolean = False
@@ -763,6 +867,16 @@ Public Class MoveRawPartPage
             Next
             If Not bOkRotate Then Return
          Else
+            ' sposto il pezzo in centro tavola → perchè tutti i movimenti sono fatti ruotando il pezzo in centro tavola!
+            Dim b3Area As New BBox3d
+            EgtGetTableArea(1, b3Area)
+            Dim b3RawTemp As New BBox3d
+            EgtGetRawPartBBox(nRawId, b3RawTemp)
+            ' ricavo il riferimento dell'angolo in basso a sinstra del grezzo rispetto alla tavola
+            Dim ptCorner As Point3d = New Point3d(b3Area.DimX / 2, b3Area.DimY / 2, 0) - New Vector3d(b3RawTemp.DimX / 2, b3RawTemp.DimY / 2, 0)
+            ' sposto il pezzo in questa posizione
+            EgtMoveToCornerRawPart(nRawId, ptCorner, MCH_CR.BL)
+            ' riprovo il movimento
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -dAngRaw) Then
                If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
                   ' riposiziono il pezzo come era prima
@@ -877,6 +991,64 @@ Public Class MoveRawPartPage
       Return True
    End Function
 
+   Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
+      ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
+      If m_RawMoveDataList.Count = 0 Then Return
+      ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
+      Dim Index As Integer = 0
+      For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
+         If Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.x) < EPS_SMALL AndAlso Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.y) < EPS_SMALL Then
+            m_RawMoveDataList.RemoveAt(Index)
+         End If
+      Next
+      ' verifico che la lista non sia vuota
+      If m_RawMoveDataList.Count = 0 Then Return
+
+      ' recupero disposizione fase corrente
+      Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' imposto la pausa nella disposizione corrente
+      SetPause(nDispId)
+      ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
+      SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
+      ' imposto eventuale movimento pezzi su tavola ausiliaria
+      SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      '' Eseguo calcolo speciale dei movimenti: per tavola multicut
+      'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
+
+      ' Creo nuova fase
+      Dim nNewPhase As Integer = EgtAddPhase()
+
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+
+      Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
+      'SetPause(nCurrDisposition)
+      m_nCurrDisposition = nCurrDisposition
+      ' EgtSetStatus(nRawIdSlected, GDB_ST.OFF)
+      EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+      EgtSetCurrPhase(nNewPhase)
+      SetAuxTabInCurrDisposition()
+      ' ripulisco la lista degli spostamenti
+      m_RawMoveDataList.Clear()
+      ' aggiorno la fase corrente
+      m_nCurrPhase = EgtGetCurrPhase()
+   End Sub
+
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
       ' Recupero il primo grezzo selezionato
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
@@ -912,7 +1084,30 @@ Public Class MoveRawPartPage
       EgtDeselectAll()
       ' Torno alla fase precedente
       m_bPrev = True
-      ' Passo alla pagina delle spezzature
+      ' Passo alla pagina delle spezzature solo se non esiste prima una fased di deposito sulla tavola di scarico
+
+      Dim nPrevDispId As Integer = EgtGetPrevOperation(m_nCurrDisposition)
+      ' verifico se la fasa precedente è di tipo scarico
+      If IsDispUnloadOnAuxTab(nPrevDispId) <> 0 Then
+         EgtSetCurrPhase(m_nCurrPhase - 1)
+         m_nCurrDisposition = nPrevDispId
+         m_nCurrPhase -= 1
+         m_bPrev = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         Return
+      End If
+
+      'If EgtGetOperationType(EgtGetPrevOperation(m_nCurrDisposition)) = MCH_OY.DISP AndAlso m_SplitPage.m_bOnAuxTab Then
+      '   EgtSetCurrPhase(m_nCurrPhase - 1)
+      '   m_nCurrDisposition = EgtGetPrevOperation(m_nCurrDisposition)
+      '   m_nCurrPhase -= 1
+      '   m_bPrev = False
+      '   m_SplitPage.m_bShow = True
+      '   EgtDraw()
+      '   Return
+      'End If
+
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_SplitPage)
       m_MainWindow.m_CadCutPageUC.m_CadCutMode = CadCutPageUC.CadCutModes.Split
@@ -928,6 +1123,19 @@ Public Class MoveRawPartPage
          ' non cambio pagina
          Return
       End If
+
+      ' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+      If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
+         EgtSetCurrPhase(m_nCurrPhase + 1)
+         m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         m_nCurrPhase += 1
+         m_bToNext = False
+         m_SplitPage.m_bShow = True
+         EgtDraw()
+         EnableButtons()
+         Return
+      End If
+
       ' resetto l'inidice del pezzo da mnovimentare
       m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
@@ -973,6 +1181,26 @@ Public Class MoveRawPartPage
       EnableButtons()
    End Sub
 
+   ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
+   Public Function IsDispUnloadOnAuxTab(nCurrDispId As Integer) As Integer
+      ' verifico se la fase precedente è uno scarico su tavola ausiliaria
+      Dim bVal As Integer = 0
+      EgtGetInfo(nCurrDispId, "Pat", bVal)
+      Return bVal
+   End Function
+
+   ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
+   Public Function GetNextDisposition(nCurrDisposId As Integer) As Integer
+      Dim nDispId As Integer = nCurrDisposId
+      While nDispId <> GDB_ID.NULL
+         If EgtGetOperationType(nDispId) = MCH_OY.DISP Then
+            Return nDispId
+         End If
+         nDispId = EgtGetNextOperation(nDispId)
+      End While
+      Return GDB_ID.NULL
+   End Function
+
    Private Sub EnableButtons()
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -987,11 +1215,22 @@ Public Class MoveRawPartPage
       TopRBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomLBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
+      PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
-      NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+      If m_SplitPage.m_bShow Then
+         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+      Else
+         NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+      End If
    End Sub
 
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
+      ' verifico che la fase corrente non sia vuota
+      Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      If EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+         EgtErase(nLastDispId)
+      End If
+
       ' Se movimento con ventose
       If Not m_bByHand Then
          ' nascondo le ventose
@@ -1007,11 +1246,11 @@ Public Class MoveRawPartPage
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
             ' imposto eventuale movimento pezzi su tavola ausiliaria
-            SaveMovePartsOnAuxTable( nDispId, m_SplitPage.m_bOnAuxTab)
+            SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
-      ' se altrimenti movimento senza ventose perchè lama troppo grande
+         ' se altrimenti movimento senza ventose perchè lama troppo grande
       ElseIf GetVacuumType() > 0 Then
          ' se non solo visualizzazione
          If Not m_SplitPage.m_bShow Then

CadCuts/NestPageUC.xaml.vb

@@ -1175,7 +1175,9 @@ Public Class NestPageUC
       m_ptPrev = ptCurr
       ' Terminata esecuzione di drag
       m_bDragging = False
-      ' se è stato eseguito il Drag allora cancello tutti i ponticelli
+      '' elimino il ponticello associato: nella vilualizzazione il percorso di lavorazioni non si muove! in attesa di gestione
+      'DeleteBridgeAssociated(nMoveId)
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
       ResetAllBRidges()
    End Sub
 
@@ -2312,6 +2314,11 @@ Public Class NestPageUC
       EgtZoom(ZM.ALL)
    End Sub
 
+   ' ripulisco la lista dei pezzi in parcheggio
+   Friend Sub ResetListOfGruopInPark()
+      m_ListOfGroupInPark.Clear()
+   End Sub
+
    Friend Function StoreOnePart(nId As Integer, Optional ByVal bForced As Boolean = False) As Boolean
       ' Se pezzo in grezzo, metto in parcheggio (sempre possibile)
       If bForced OrElse
@@ -2389,6 +2396,10 @@ Public Class NestPageUC
       Dim dEraseArea As Double = 0
       nId = EgtGetFirstSelectedObj()
       While nId <> GDB_ID.NULL
+         '' elimino eventuali ponticelli associati al pezzo: nella vilualizzazione il percorso di lavorazioni non si muove! in attesa di gestione
+         'DeleteBridgeAssociated(nId)
+         ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+         ResetAllBRidges()
          ' Recupero indice del successivo
          Dim nNextId = EgtGetNextSelectedObj()
          ' Se abilitata cancellazione in ogni caso o pezzo non da Csv
@@ -2434,6 +2445,47 @@ Public Class NestPageUC
       EgtZoom(ZM.ALL)
    End Sub
 
+   Private Sub DeleteBridgeAssociated(nMyId As Integer)
+      ' verifico se esistono dei ponticelli associati al pezzo indicato
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = BRIDGES
+      Dim nIdBridgesGroup As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nIdBridgesGroup <> GDB_ID.NULL Then
+         ' carico la prima entità del gruppo BRIDGES
+         Dim nIdBridgeLine As Integer = GDB_ID.NULL
+         nIdBridgeLine = EgtGetFirstNameInGroup(nIdBridgesGroup, BRIDGELINE)
+         ' ciclo su tutte le entità
+         While nIdBridgeLine <> GDB_ID.NULL
+            Dim nNextBridgeLine As Integer = GDB_ID.NULL
+            Dim nIdPart As Integer = GDB_ID.NULL
+            If EgtGetInfo(nIdBridgeLine, "PartStart", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            If EgtGetInfo(nIdBridgeLine, "PartEnd", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            ' il BridgeLine corrente non contiene riferimeti al pezzo da eliminare
+            nIdBridgeLine = EgtGetNext(nIdBridgeLine)
+         End While
+      End If
+   End Sub
+
    Private Sub SelectAllBtn_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Numero dei pezzi in tavola

CadCuts/SplitAuto.vb

@@ -363,6 +363,13 @@ Public Module SplitAuto
                   vNewRaws.Add(nNewRawId)
                   nNewRawId = EgtGetNextRawPart(nNewRawId)
                End While
+            Else
+               ' verifico che nella fase precedente è stato definito come sfrido, allora lo riassegno
+               Dim nVal As Integer = 0
+               EgtGetInfo(nRawId, K_ISNEWSCRAPS, nVal)
+               If nVal = 1 Or nVal = 2 Or nVal = 3 Then
+                  EgtSetInfo(nRaw1Id, K_ISNEWSCRAPS, "3")
+               End If
             End If
             ' Assegno ai nuovi grezzi eventuale texture del grezzo originale
             Dim nSolidId = EgtGetFirstNameInGroup(nRawId, NAME_RAW_SOLID)

CadCuts/SplitPageUC.xaml.vb

@@ -7,6 +7,7 @@ Public Class SplitPageUC
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Tipo movimento dei grezzi (manuale o con testa ventosa)
@@ -35,12 +36,9 @@ Public Class SplitPageUC
    Private m_nIdSelectedWaterJet_End As Integer = GDB_ID.NULL
    ' Id gruppo Bridges (Nuovo da versione 30/08/2022)
    Private m_nIdBridgesGroup As Integer = GDB_ID.NULL
-   Private m_nIdBridgeLineGroup As Integer = GDB_ID.NULL
    Private m_nIdBridge As Integer = GDB_ID.NULL
    Private m_ptSrtBridge As New Point3d
    Private m_ptEndBridge As New Point3d
-   Public Const BRIDGES As String = "Bridges"
-   Public Const BRIDGELINE As String = "BridgeLine"
 
    Private m_ItemList As New ObservableCollection(Of NameIdLsBxItem)
    'Private m_CurrInd As Integer = -1
@@ -59,6 +57,8 @@ Public Class SplitPageUC
    Private m_bDragging As Boolean = False
    ' Selected cut
    Private m_nSelected As Integer = GDB_ID.NULL
+   ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
+   Private m_StartEndModifyOnIntCorner As Boolean = False
 
    Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
       PrevBtn.IsEnabled = False
@@ -87,6 +87,7 @@ Public Class SplitPageUC
       AutoBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 18)         ' Auto
       RestartBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 19)      ' Restart
       BridgesWJBtn.ToolTip = "Bridges"
+      BridgesDeleteWJBtn.ToolTip = "Remove bridges"
    End Sub
 
    Private Sub SplitPageUC_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -107,6 +108,8 @@ Public Class SplitPageUC
       m_bEnableOnAuxTab = Not m_bByHand AndAlso
                           m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MOVE_PARTS) AndAlso
                           EgtGetTableId(AUX_TAB) <> GDB_ID.NULL
+      ' verifico se è abilitata la possibiltà di allungare i lati interni
+      m_StartEndModifyOnIntCorner = (GetPrivateProfileInt(S_NEST, K_STARTENDMODIFYONINTCORNER, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Nascondo eventuali pezzi in parcheggio
       HideParkedParts()
       ' Nascondo eventuale contorno da foto
@@ -237,27 +240,16 @@ Public Class SplitPageUC
          EgtGetName(nIdParent, sLayer)
          ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
          If sLayer = NAME_OUTLOOP Then
-            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+            If (EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE) AndAlso VerifySideIsAcceptable(nIdMy) Then
                If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
                   EgtDeselectObj(m_nIdSelectedSideWJ)
                End If
                ' recupero il gruppo della lavorazione associata
                nIdParentPart = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
-               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet associate a questo Part
-               Dim ListGroup As List(Of Integer) = m_MainWindow.m_CadCutPageUC.m_NestPage.ResearchGropuWJ(nIdParent, nIdPV)
-               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
-               Dim ListGroupSaw As List(Of Integer) = m_MainWindow.m_CadCutPageUC.m_NestPage.ResearchGropuSaw(nIdParent, nIdPV)
                ' se non esiste almeno 1 Preview di tipo WaterJet
-               If ListGroup.Count > 0 Then
+               If IsWaterJetting(nIdMy) Then
+                  ' NON RECUPERO LA PREVIEW DELLA LAVORAZIONE → m_nIdSelectedWaterJet
                   m_nIdSelectedSideWJ = nIdMy
-                  ' Ricalcolo tutte le lavorazioni
-                  Dim nWarn As Integer = 0
-                  ResetAllMachinings(nWarn)
-                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
-                  ListGroup = m_MainWindow.m_CadCutPageUC.m_NestPage.ResearchGropuWJ(nIdParent, nIdPV)
-                  Dim nIdWJ As Integer = m_MainWindow.m_CadCutPageUC.m_NestPage.GetPVIdFromIdSide(ListGroup, nIdMy)
-                  m_MainWindow.m_CadCutPageUC.m_NestPage.GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
                   ' recupero il punto più vicino alla curva passata
                   If IsFirst Then
                      EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptSrtBridge)
@@ -267,20 +259,23 @@ Public Class SplitPageUC
                      EgtModifyCurveEndPoint(m_nIdBridge, m_ptEndBridge, GDB_RT.GLOB)
                      If VerifyInterference(m_nIdBridge) Then
                         m_CurrProjPage.ClearMessage()
-                        ' salvo nel Gruppo "BridgeLine" gli dei pezzi che sono collegati
+                        EgtSetInfo(m_nIdBridge, "PartStart", m_nIdSelectedPartWJ_Srt)
-                        EgtSetInfo(EgtGetParent(m_nIdBridge), "PartStart", m_nIdSelectedPartWJ_Srt)
+                        EgtSetInfo(m_nIdBridge, "EntStart", m_nIdSelectedSideWJ_Srt)
-                        EgtSetInfo(EgtGetParent(m_nIdBridge), "PartEnd", m_nIdSelectedPartWJ_End)
+                        EgtSetInfo(m_nIdBridge, "PartEnd", m_nIdSelectedPartWJ_End)
+                        EgtSetInfo(m_nIdBridge, "EntEnd", m_nIdSelectedSideWJ_End)
+                        EgtSetInfo(m_nIdBridge, "Ph", EgtGetCurrPhase())
+                        ' Ricalcolo tutte le lavorazioni
+                        Dim nWarn As Integer = 0
+                        ResetAllMachinings(nWarn)
                      Else
                         ' attendo la selezione di un punto valido
                         m_nIdSelectedSideWJ = GDB_ID.NULL
-                        m_nIdSelectedWaterJet = GDB_ID.NULL
                         nIdParentPart = GDB_ID.NULL
                         m_CurrProjPage.ClearMessage()
                         m_CurrProjPage.SetWarningMessage("Bridge intersects part")
                         Return
                      End If
                   End If
-                  m_nIdSelectedWaterJet = nIdWJ
                   ' salvo il valore del PreView evidenziato
                   EgtSetMark(nIdParentPart)
                   ' EgtSetMark(nIdWJ)
@@ -306,13 +301,19 @@ Public Class SplitPageUC
       Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
       While nIdMy <> GDB_ID.NULL
          Dim sGroupName As String = String.Empty
+         Dim sSelName As String = String.Empty
          ' gruppo di appartenenza
          Dim nIdParent As Integer = EgtGetParent(nIdMy)
-         ' recupero il nome del Layer
+         ' recupero il nome del gruppo di appartenenza
          EgtGetName(nIdParent, sGroupName)
-         If sGroupName.Contains(BRIDGELINE) Then
+         ' recupero il nome dell'oggetto selezionato
-            EgtErase(nIdParent)
+         EgtGetName(nIdMy, sSelName)
+         If sGroupName.Contains(BRIDGES) AndAlso sSelName.Contains(BRIDGELINE) Then
+            EgtErase(nIdMy)
             EgtDraw()
+            ' Ricalcolo tutte le lavorazioni
+            Dim nWarn As Integer = 0
+            ResetAllMachinings(nWarn)
             Return
          End If
          nIdMy = EgtGetNextObjInSelWin()
@@ -323,9 +324,9 @@ Public Class SplitPageUC
       ptCurr.z = m_ptSrtBridge.z
       ' rappresento il egmento
       If m_nIdBridge = GDB_ID.NULL Then
-         m_nIdBridgeLineGroup = EgtCreateGroup(m_nIdBridgesGroup)
+         m_nIdBridge = EgtCreateLine(m_nIdBridgesGroup, m_ptSrtBridge, ptCurr, GDB_RT.GLOB)
-         EgtSetName(m_nIdBridgeLineGroup, BRIDGELINE)
+         ' assegno un nome alla linea
-         m_nIdBridge = EgtCreateLine(m_nIdBridgeLineGroup, m_ptSrtBridge, ptCurr, GDB_RT.GLOB)
+         EgtSetName(m_nIdBridge, BRIDGELINE)
       End If
       EgtModifyCurveEndPoint(m_nIdBridge, ptCurr, GDB_RT.GLOB)
       EgtDraw()
@@ -361,6 +362,75 @@ Public Class SplitPageUC
       Return True
    End Function
 
+   Private Function VerifySideIsAcceptable(nMyId As Integer) As Boolean
+      Dim dVal As Double = 0
+      ' verifico che l'entità selezionata non contenga questi parametri
+      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE2, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      If EgtGetInfo(nMyId, INFO_SIDE_ANGLE, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      If EgtGetInfo(nMyId, INFO_ORIG_SIDE_ANGLE, dVal) Then
+         If dVal <> 0 Then
+            Return False
+         End If
+      End If
+      ' altrimenti l'entità è accettabile
+      Return True
+   End Function
+
+   ' verifico che il lato selezionato appartenga ad una lavorazione di tipo Waterjet
+   Private Function IsWaterJetting(nMyId As Integer) As Boolean
+      ' verifico che sul lato indicato sia impostato un taglio di tipo WaterJet
+      Dim nMchId As Integer = GDB_ID.NULL
+      For nInd As Integer = 0 To m_MachiningList.Count() - 1
+         nMchId = m_MachiningList(nInd).m_nId
+         Dim nMachiningType As Integer = EgtGetOperationType(m_MachiningList(nInd).m_nId)
+         If nMachiningType = MCH_MY.WATERJETTING Then
+            EgtSetCurrMachining(nMchId)
+            Dim nIndex As Integer = 0
+            Dim nIdSide As Integer = GDB_ID.NULL
+            Dim nSub As Integer = GDB_ID.NULL
+            While EgtGetMachiningGeometry(nIndex, nIdSide, nSub)
+               If nIdSide = nMyId Then
+                  Return True
+               End If
+               nIndex += 1
+            End While
+         End If
+      Next
+      Return False
+   End Function
+
+   Private Sub RefreshMachList()
+      For nI As Integer = 0 To m_MachiningList.Count() - 1
+         ' cancello tutti gli indici di lavorazione presenti nel disegno
+         Dim nNbrId As Integer = GDB_ID.NULL
+         EgtErase(m_MachiningList(nI).m_nNbrId)
+         EgtRemoveInfo(m_MachiningList(nI).m_nId, "NbrId")
+      Next
+      ' Preparo la lista delle lavorazioni
+      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      ' Aggiorno visualizzazione delle lavorazioni
+      For nI As Integer = 0 To m_MachiningList.Count() - 1
+         ' sistemo colore
+         ColorMachining(m_MachiningList(nI))
+         ' assegno nuova numerazione
+         NumberDirectionMachining(nI)
+         ' conto il numero di tipi di lavorazioni
+         CountMachiningType(m_MachiningList(nI), m_nCountSawing, m_nCountWaterjetting, m_nCountOtherMachining)
+      Next
+      ' aggiorno grafica
+      ShowMachiningList()
+      ' aggiorno la visualizzazione
+      EgtDraw()
+   End Sub
+
    Private Sub DeselectWJBridgesPart()
       ' se in fase di definzione di un ponticello lo elimino
       If m_nIdSelectedSideWJ_Srt <> GDB_ID.NULL And m_nIdSelectedSideWJ_End = GDB_ID.NULL And m_nIdBridge <> GDB_ID.NULL Then
@@ -397,6 +467,8 @@ Public Class SplitPageUC
             OnMyMouseDownSceneBridges(sender, e, True, m_nIdSelectedSideWJ_Srt, m_nIdSelectedWaterJet_Srt, m_nIdSelectedPartWJ_Srt)
          Else
             OnMyMouseDownSceneBridges(sender, e, False, m_nIdSelectedSideWJ_End, m_nIdSelectedWaterJet_End, m_nIdSelectedPartWJ_End)
+            ' aggiorno la visualizzazione delle lavorazioni e la lista
+            RefreshMachList()
          End If
          ' se entrambi i pezzi sono stati definiti allora procedo alla deselezione
          If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL And m_nIdSelectedPartWJ_End <> GDB_ID.NULL Then
@@ -408,6 +480,8 @@ Public Class SplitPageUC
       ' eliminazione dei ponticelli
       If BridgesDeleteWJBtn.IsChecked Then
          OnMyMouseDownSceneBridgesDelete(sender, e)
+         ' aggiorno la visualizzazione delle lavorazioni e la lista
+         RefreshMachList()
          Return
       End If
 
@@ -859,6 +933,7 @@ Public Class SplitPageUC
       EnableButtons()
    End Sub
 
+   ' ERRORE: questo evento non è eseguito!
    Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs)
       If e.Key = Key.Escape Then
          ' se sono in fase di creazione di un ponticello interrompo
@@ -1304,21 +1379,24 @@ Public Class SplitPageUC
             Do
                ' Se c'è limite alla lunghezza libera
                If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
-                  ' Recupero sicurezza in corner interno
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
-                  Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+                  If Not m_StartEndModifyOnIntCorner Then
-                  ' Recupero lunghezza baffo del taglio
+                     ' Recupero sicurezza in corner interno
-                  Dim nPvId As Integer = GDB_ID.NULL
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
-                  EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     ' Recupero lunghezza baffo del taglio
-                  Dim dDT As Double = 0
+                     Dim nPvId As Integer = GDB_ID.NULL
-                  EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
-                  dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                  End If
                End If
                ' Modifica della lavorazione
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
                ' verifico che non sia sull'angolo interno (altrimenti vieto la modifica)
-               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUsal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
@@ -1472,21 +1550,24 @@ Public Class SplitPageUC
             Do
                ' Se c'è limite alla lunghezza libera
                If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
-                  ' Recupero sicurezza in corner interno
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
-                  Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
+                  If Not m_StartEndModifyOnIntCorner Then
-                  ' Recupero lunghezza baffo del taglio
+                     ' Recupero sicurezza in corner interno
-                  Dim nPvId As Integer = GDB_ID.NULL
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, m_MainWindow.GetMachIniFile()), 10 * EPS_SMALL)
-                  EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     ' Recupero lunghezza baffo del taglio
-                  Dim dDT As Double = 0
+                     Dim nPvId As Integer = GDB_ID.NULL
-                  EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
-                  dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                  End If
                End If
 
                ' Modifica della lavorazione
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUeal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
@@ -1658,6 +1739,16 @@ Public Class SplitPageUC
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      If m_bShow Then
+         Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+         ' recupero l'operazione successiva
+         Dim NextDisposition As Integer = EgtGetNextOperation(CurrDisposition)
+         If Not IsNothing(m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage) Then
+            ' verifico che l'operazione sia una disposizione, altrimenti cerco
+            NextDisposition = m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage.GetNextDisposition(NextDisposition)
+            m_bOnAuxTab = m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage.IsDispUnloadOnAuxTab(NextDisposition)
+         End If
+      End If
       m_bToNext = True
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(m_MainWindow.m_CadCutPageUC.m_SplitPage)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage)
@@ -1889,7 +1980,7 @@ Public Class SplitPageUC
                m_bOnAuxTab = False
                ' Ci deve essere almeno 1 taglio disabilitato e 1 e 1 solo passante
                NextBtn.IsEnabled = (GetDisabledCutsCount() > 0 And GetSplitCutsCount() = 1)
-            ' Altrimenti
+               ' Altrimenti
             Else
                ' movimento standard sulla tavola (almeno un taglio disabilitato)
                Dim bStdTab As Boolean = (GetDisabledCutsCount() > 0)
@@ -1900,7 +1991,7 @@ Public Class SplitPageUC
                ' Deve essere permesso almeno un tipo di movimento
                NextBtn.IsEnabled = bStdTab Or m_bOnAuxTab Or bFinalMoveTab
             End If
-         ' altrimenti sto solo visualizzando
+            ' altrimenti sto solo visualizzando
          Else
             ' movimento su tavola di scarico
             m_bOnAuxTab = (m_nCurrPhase = EgtGetPhaseCount() - 1 And m_bEnableOnAuxTab And EgtGetOperationType(EgtGetLastOperation()) = MCH_OY.DISP)
@@ -1939,6 +2030,8 @@ Public Class SplitPageUC
       ModifEndBtn.IsEnabled = Not m_bShow
       InvertBtn.IsEnabled = Not m_bShow
       PauseBtn.IsEnabled = Not m_bShow And m_MainWindow.m_CurrentMachine.bEnablePause
+      BridgesWJBtn.IsEnabled = Not m_bShow
+      BridgesDeleteWJBtn.IsEnabled = Not m_bShow
 
       ' nascondo i comandi che non devono essere visualizzati in funzione delle lavorazioni attive
       If m_nCountSawing = 0 And (m_nCountWaterjetting > 0 Or m_nCountOtherMachining) Then

CadCuts/VacuumCups.vb

@@ -67,17 +67,17 @@ Module VacuumCups
    End Function
 
    ' carico i dati macchina relativi al peso massimo movimentabile
-   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+   Friend Sub SetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
       m_RawDensity = Density
       m_MaxWeightSinglePlugger = MaxSingle
       m_MaxWeightDoublePlugger = MaxDouble
    End Sub
 
-   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+   Friend Sub SetRotationForExtraStrokeY(Rotate As Boolean)
       bRotateVacuumNearExtraStrokeY = Rotate
    End Sub
 
-   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+   Friend Sub SetRotationForExtraStrokeX(Rotate As Boolean)
       bRotateVacuumNearExtraStrokeX = Rotate
    End Sub
    Friend Function GetVacuumId() As Integer

Constants/ConstGen.vb

@@ -343,6 +343,11 @@ Module ConstGen
    ' Info in pezzo per facet di ultima superficie selezionata
    Public Const INFO_FRAME_FACET As String = "Facet"
 
+   ' Nome del groppo dei ponticelli per lavorazioni Water
+   Public Const BRIDGES As String = "Bridges"
+   ' Nome dell'entità ponticello contenuta nel gruppo BRIDGES
+   Public Const BRIDGELINE As String = "BridgeLine"
+
    ' utensile per le lavorazioni manuali
    Public Const DUMMY_SAW As String = "DummySAW"
    ' lavorazione manuale
@@ -386,6 +391,9 @@ Module ConstGen
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -135,6 +136,7 @@ Module ConstIni
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -155,6 +157,7 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
    Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"
@@ -170,6 +173,14 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
 
+   Public Const S_TRF As String = "TRF"
+   Public Const K_ORDCODE As String = "OrdCode"
+   Public Const K_ORDDESC As String = "OrdDesc"
+   Public Const K_PARTCODE As String = "PartCode"
+   Public Const K_MATCODE As String = "MatCode"
+   Public Const K_SURFCODE As String = "SurfCode"
+   Public Const K_TRFTHICKNESS As String = "TrfThickness"
+
    Public Const S_SLABDXF As String = "SlabDxf"
    Public Const K_IMPORTSLABDXF As String = "ImportSlabDxf"
    Public Const K_SLABLAYER As String = "SlabLayer"
@@ -216,6 +227,15 @@ Module ConstIni
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
+   Public Const S_SCRAPS As String = "Scraps"
+   Public Const K_ENABLESCRAPS As String = "EnableScraps"
+   Public Const K_PHOTODIR As String = "PhotoDir"
+   Public Const K_LASTBLOCK As String = "LastBlock"
+   Public Const K_TEMPLATE As String = "Template"
+   Public Const K_DAT As String = "Dat"
+   Public Const K_ZEBRAUTILITIES As String = "ZebraUtilities"
+   Public Const K_ENABLE_PRINTER As String = "EnablePrinter"
+
    Public Const S_REG As String = "Reg"
    Public Const K_REGSTEP As String = "Step"
    Public Const K_REGANGSTEP As String = "AngStep"

Constants/ConstMachIni.vb

@@ -46,6 +46,11 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_EXECLUA As String = "ExecLua"
+   Public Const K_DIRSCRIPT_LUA As String = "DirScript"
+   Public Const K_FILESCRIPT_LUA As String = "FileScript"
+   Public Const K_CALLFUNCTION As String = "CallFunction"
+
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
@@ -233,6 +238,9 @@
    Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
    Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
+   Public Const K_ISNEWSCRAPS As String = "IsNewScraps"
+   Public Const K_DATABASEID As String = "DatabaseID"
+
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
 

DirectCuts/DirectCutPageUC.xaml

@@ -201,7 +201,8 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="4*"/>
             <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -240,8 +241,14 @@
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
 
-         <!--Comando Manula/MDI-->
+         <!--Parking-->
-         <Button Name="ManualModeBtn" Grid.Column="7"
+         <ToggleButton Name="ParkingBtn" Grid.Column="6"
+              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+             <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+            <!--Comando Manula/MDI-->
+         <Button Name="ManualModeBtn" Grid.Column="8"
                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
              <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -257,6 +257,7 @@ Public Class DirectCutPageUC
       ZCBtn.Visibility = Visibility.Collapsed
       ZBBtn.Visibility = Visibility.Collapsed
       RemoteBtn.Visibility = Visibility.Collapsed
+      ParkingBtn.Visibility = Visibility.Collapsed
 
       Dim Item As MachineButton = Nothing
       For Each Item In m_ButtonJogList
@@ -277,6 +278,10 @@ Public Class DirectCutPageUC
                RemoteBtn.Visibility = Visibility.Visible
                RemoteBtn.Foreground = Brushes.White
                RemoteBtn.Content = "Remote"
+            Case K_PARKING
+               ParkingBtn.Visibility = Visibility.Visible
+               ParkingBtn.Foreground = Brushes.White
+               ParkingBtn.ToolTip = "Parking"
          End Select
       Next
    End Sub
@@ -513,6 +518,43 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
+   Private Sub ParkingBtn_Click(sender As Object, e As RoutedEventArgs) Handles ParkingBtn.Click
+      Dim ParkingButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_PARKING Then
+            ParkingButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ParkingButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = ParkingButton.TLuaScriptName
+      Else
+         sLuaFileName = ParkingButton.FLuaScriptName
+      End If
+      ParkingButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub ParkingStateChanged(bParkingState As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_PARKING Then
+            ParkingButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(bParkingState)
+         ParkingButton.IsChecked = bParkingState
+      End If
+   End Sub
+
    '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then

DrawImport/CompoTrfData.xaml.vb

@@ -24,6 +24,7 @@ Public Class CompoTrfData
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      SaveData()
       Close()
    End Sub
 
@@ -32,7 +33,30 @@ Public Class CompoTrfData
       Close()
    End Sub
 
+   Private Sub SaveData()
+      WritePrivateProfileString(S_TRF, K_ORDCODE, OrdCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_ORDDESC, OrdDescTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_PARTCODE, PartCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_MATCODE, MatCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_SURFCODE, SurfCodeTxBx.Text, m_MainWindow.GetIniFile())
+      ' prima di salvare lo spessore converto in mm e poi di nuovo in stringa
+      Dim dVal As Double = 0
+      StringToLen(ThicknessTxBx.Text, dVal)
+      WritePrivateProfileString(S_TRF, K_TRFTHICKNESS, DoubleToString(dVal, 4), m_MainWindow.GetIniFile())
+   End Sub
+
    Friend Sub SetData(sOrdCode As String, sOrdDesc As String, sPartCode As String, sMatCode As String, sSurfCode As String, dTh As Double)
+      ' se verifico che non sono stati iniziliazzti i campi allora provvedo a leggere il file ini del programma
+      If sOrdCode = "" And sOrdDesc = "" And sPartCode = "" And sMatCode = "" And sSurfCode = "" Then
+         GetPrivateProfileString(S_TRF, K_ORDCODE, sOrdCode, sOrdCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_ORDDESC, sOrdDesc, sOrdDesc, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_PARTCODE, sPartCode, sPartCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_MATCODE, sMatCode, sMatCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_SURFCODE, sSurfCode, sSurfCode, m_MainWindow.GetIniFile())
+         ' recupero il dato dello spessore che deve essere in mm
+         dTh = GetPrivateProfileDouble(S_TRF, K_TRFTHICKNESS, dTh, m_MainWindow.GetIniFile())
+      End If
+      ' inizializzo i campi della finestra
       OrdCodeTxBx.Text = sOrdCode
       OrdDescTxBx.Text = sOrdDesc
       PartCodeTxBx.Text = sPartCode

DrawImport/DrawPageUC.xaml

@@ -64,7 +64,7 @@
                <ToggleButton Name="DimensionBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowToggleButton}" Visibility="Collapsed"/>
             </Grid>
 
-            <Grid Name="VariablesGrd" Grid.Row="1" Grid.ColumnSpan="2"/>
+            <Grid Name="VariablesGrd" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2"/>
             
             <Grid Name="MessageGrid" Grid.Row="2" Grid.ColumnSpan="2">
                <TextBlock Name="MessageTxBl" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>

DrawImport/DrawPageUC.xaml.vb

@@ -1173,8 +1173,10 @@ Public Class DrawPageUC
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
       If m_bTrfData Then
          Dim DlgTrfData As New CompoTrfData(m_MainWindow)
+         ' carico i dati appena salvati nella pagina
          DlgTrfData.SetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          If DlgTrfData.ShowDialog() Then
+            ' recupero i dati salvati nella pagina
             DlgTrfData.GetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          End If
       ElseIf m_bCsvData Then
@@ -1253,6 +1255,8 @@ Public Class DrawPageUC
    Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       If EngraveBtn.IsChecked Then
+         ' Aumento lo spazio disponibile per inserirei i parametri (tolgo spazio ad eventuali messaggi)
+         Grid.SetRowSpan(VariablesGrd, 2)
          ' Imposto modalità
          m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
          If m_ActiveComponentPage = Pages.CompoDimension Then
@@ -1284,6 +1288,7 @@ Public Class DrawPageUC
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
+         Grid.SetRowSpan(VariablesGrd, 2)
          VariablesGrd.Children.Remove(m_SideAngleUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
             VariablesGrd.Children.Add(m_CompoDimension)

DrawImport/ImportPageUC.xaml.vb

@@ -839,7 +839,7 @@ Public Class ImportPageUC
          PartId = EgtGetNextPart(PartId)
       End While
 
-      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      ' identificativo univoico del gruppo di pezzi, se più di un "Repeat"
       Dim sGUICode As New List(Of String)
 
       ' Scrivo testi per nesting
@@ -881,6 +881,7 @@ Public Class ImportPageUC
          EgtInsertFile(sTmpFile)
 
          Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         If FirstOfImport = GDB_ID.NULL Then FirstOfImport = EgtGetFirstPart()
          Dim Index As Integer = 1
          While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
             If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
@@ -917,6 +918,7 @@ Public Class ImportPageUC
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
       While nId <> GDB_ID.NULL

DrawImport/SideAngleUc.xaml

@@ -5,7 +5,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+   d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -28,7 +28,7 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="0.2*"/>
-         <RowDefinition Height="4*"/>
+         <RowDefinition Height="5*"/>
          <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
@@ -135,7 +135,7 @@
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
           <Grid.ColumnDefinitions>
                 <ColumnDefinition Width="1.5*"/>
                 <ColumnDefinition Width="0.3*"/>
@@ -143,10 +143,11 @@
                 <ColumnDefinition Width="0.6*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
@@ -196,6 +197,16 @@
                                   Margin="0,0,0,-2"
                                   Width="85" Height="30"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+               Text="Angolo"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
         </Grid>
 
         <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"

DrawImport/SideAngleUc.xaml.vb

@@ -36,6 +36,7 @@ Public Class SideAngleUC
    Friend m_dDripDepth As Double = 10
    Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
+   Friend m_dEngraveAngle As Double = 0
 
    Private CurrEntityDrip As DripEntity
 
@@ -106,6 +107,9 @@ Public Class SideAngleUC
          ' Accorciamento
          Parameter4TxBl.Visibility = Windows.Visibility.Hidden
          Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         ' Angolo 
+         Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+         Parameter5TxBx.Visibility = Windows.Visibility.Hidden
       Else
          ' se aggiungo gli ENGRAVE e i DRIP
 
@@ -117,10 +121,12 @@ Public Class SideAngleUC
             GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
             GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
          Next
+
          ' Offset
          Parameter1TxBl.Visibility = Windows.Visibility.Visible
          Parameter1TxBx.Visibility = Windows.Visibility.Visible
          Parameter2TxBl.Visibility = Windows.Visibility.Visible
+
          ' Offset2
          If m_Mode <> ModeOpt.ENGRAVE Then
             Parameter2TxBx.Visibility = Windows.Visibility.Visible
@@ -131,6 +137,7 @@ Public Class SideAngleUC
             Parameter2aTxBx.Visibility = Windows.Visibility.Visible
             Parameter2bTxBx.Visibility = Windows.Visibility.Visible
          End If
+
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
@@ -146,6 +153,17 @@ Public Class SideAngleUC
             Parameter4TxBx.Visibility = Windows.Visibility.Hidden
          End If
 
+         ' Angolo
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter5TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 9)            ' Angolo
+            Parameter5TxBl.Visibility = Windows.Visibility.Visible
+            Parameter5TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter5TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -167,11 +185,13 @@ Public Class SideAngleUC
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
          m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
+         m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
          Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
+         Parameter5TxBx.Text = LenToString(m_dEngraveAngle, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -501,6 +521,7 @@ Public Class SideAngleUC
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3), m_MainWindow.GetIniFile())
       End If
 
       EgtDraw()
@@ -862,6 +883,8 @@ Public Class SideAngleUC
          End While
       End If
 
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -881,15 +904,70 @@ Public Class SideAngleUC
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
             'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
 
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1336,6 +1414,15 @@ Public Class SideAngleUC
       End If
    End Sub
 
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      If m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter5TxBx.Text, m_dEngraveAngle)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
+      End If
+   End Sub
+
    Friend Sub ReLoadSideAnglePage()
       SideAngleUC_Loaded(Me, New RoutedEventArgs)
    End Sub

EgtDictionary.xaml

@@ -1,16 +1,48 @@
-<ResourceDictionary
+<ResourceDictionary x:Class="EgtDictionary"
-   x:Class="EgtDictionary"
+                    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                    xmlns:Project="clr-namespace:OmagCUT"
-   xmlns:Project="clr-namespace:OmagCUT"
+                    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
-   xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
+                    xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+                    xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+                    xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
 
-   <!--Template che permette di andare a capo-->
+    <EgtWPFLib5:StatusBarVM x:Key="StatusBarVM"/>
+    <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
+    <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
+    <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+
+    <EgtPHOTOLib:ProjectSlabVM x:Key="ProjectSlabVM"/>
+    <EgtPHOTOLib:OptionPanelSlabVM x:Key="OptionPanelSlabVM"/>
+    <EgtPHOTOLib:ListPageSlabVM x:Key="ListPageSlabVM"/>
+    <EgtPHOTOLib:DetailPageSlabVM x:Key="DetailPageSlabVM"/>
+    <EgtPHOTOLib:SearchPanelSlabVM x:Key="SearchPanelSlabVM"/>
+    <EgtPHOTOLib:MyInstrumentPanelSlabVM x:Key="MyInstrumentPanelSlabVM"/>
+
+    <!--Colori predefiniti-->
+    <SolidColorBrush x:Key="Omag_Blue" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="Omag_Yellow" Color="#FFFFCE5B" />
+    <SolidColorBrush x:Key="Omag_Red" Color="Red" />
+    <SolidColorBrush x:Key="Omag_Green" Color="LawnGreen" />
+    <SolidColorBrush x:Key="Omag_VeryLightGray" Color="#FFF2F2F2" />
+    <SolidColorBrush x:Key="Omag_LightGray" Color="LightGray" />
+    <SolidColorBrush x:Key="Omag_Gray" Color="#FF9E9E9E" />
+    <SolidColorBrush x:Key="Omag_DarkGray" Color="#FF444444" />
+    <SolidColorBrush x:Key="Omag_White" Color="#FFFFFFFF" />
+    <SolidColorBrush x:Key="Omag_Black" Color="#FF000000" />
+
+    <SolidColorBrush x:Key="EgaltechBlue1" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="EgaltechWhite" Color="#FFFFFFFF" />
+
+    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="Button_DataTemplate_Wrap">
       <TextBlock TextWrapping="Wrap" Text="{Binding}"/>
    </DataTemplate>
 
-   <!--ButtonBase-->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- Button Style -->
+
    <Style TargetType="{x:Type Button}">
       <Setter Property="FocusVisualStyle">
          <Setter.Value>
@@ -71,7 +103,44 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Template che permette di andare a capo-->
+    <DataTemplate x:Key="WrapButton_DataTemplate">
+        <TextBlock TextWrapping="WrapWithOverflow" Text="{Binding}"/>
+    </DataTemplate>
+
+    <Style x:Key="ToolBar_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+    <Style x:Key="ToolBar_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="80"/>
+    </Style>
+    <Style x:Key="OptionPanel_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextWrapButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Setter Property="Height" Value="45"/>
+    </Style>
+    <Style x:Key="OptionPanel_NestingButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="CompoWindow_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+    <Style x:Key="EgtWPFLib5_InputButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="CheckBox_DataTemplate_Wrap">
@@ -375,7 +444,59 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <Style x:Key="ToolBar_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+
+    <Style x:Key="ToolBar_TextToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="70"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_WrapToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center" />
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="Option_ColorButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Padding" Value="5"/>
+        <Setter Property="HorizontalContentAlignment" Value="Center"/>
+        <Setter Property="VerticalContentAlignment" Value="Center"/>
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Style.Triggers>
+            <Trigger Property="IsMouseOver" Value="True">
+                <Setter Property="Background" Value="#FFB8C3CD"/>
+            </Trigger>
+            <Trigger Property="IsPressed" Value="True">
+                <Setter Property="OpacityMask" Value="#33FF0000"/>
+            </Trigger>
+            <Trigger Property="ToggleButton.IsChecked" Value="True">
+                <Setter Property="Background" Value="Transparent"/>
+            </Trigger>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Background" Value="#FFF4F4F4"/>
+                <Setter Property="BorderBrush" Value="#FFADB2B5"/>
+                <Setter Property="TextElement.Foreground"  Value="#FF838383"/>
+            </Trigger>
+        </Style.Triggers>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--TreeViewBase-->
    <!--Style e colori della freccia di espansione, necessari per modificare il ContainerItemStyle perchè contiene riferimenti ad essi-->
@@ -431,6 +552,32 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtCustomWindow -->
+
+    <Style TargetType="{x:Type EgtWPFLib5:EgtCustomWindow}" BasedOn="{StaticResource {x:Type EgtWPFLib5:EgtCustomWindow}}">
+        <Setter Property="TitleBarHeight" Value="32"/>
+        <Setter Property="TitleBarBrush" Value="{StaticResource Omag_LightGray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtFloatingPanel -->
+
+    <Style x:Key="ToolBar_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <Style x:Key="Option_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="IsToolBar" Value="False"/>
+        <Setter Property="TitleBarOrientation" Value="Vertical"/>
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
 </ResourceDictionary>

Machine/AlarmsPageUC.xaml

@@ -801,19 +801,23 @@
             <Grid Grid.Column="0" Grid.Row="8">
                 <Grid.ColumnDefinitions>
                     <ColumnDefinition Width="2.5*"/>
-                    <ColumnDefinition Width="5*"/>
+                    <ColumnDefinition Width="2.5*"/>
-                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="4.5*"/>
+                    <ColumnDefinition Width="1.8*"/>
                 </Grid.ColumnDefinitions>
                 <Button x:Name="SawProbingBtn"
-         	   Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+         	         Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
                     <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
                 </Button>
+                <Button x:Name="ExecLuaBtn" Grid.Column="1"
+         	         Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                    <Image Source="{DynamicResource PlayImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+                </Button>
 
-                
+                <TextBlock Name="UseLaserOriginTxBl" Grid.Column="2"
-                <TextBlock Name="UseLaserOriginTxBl" Grid.Column="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="2"
+                <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="3"
-                  HorizontalAlignment="Right" Margin="10,0,10,0"/>
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
             </Grid>
             
         </Grid>

Machine/AlarmsPageUC.xaml.vb

@@ -45,6 +45,13 @@ Public Class AlarmsPageUC
          SawProbingBtn.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' Se esiste un file lua valido allora mostro il pulsante per l'esecuzione dello script
+      If Not String.IsNullOrEmpty(GetExecLuaFile()) And
+         ExecLuaBtn.Visibility = Visibility.Visible Then
+      Else
+         ExecLuaBtn.Visibility = Visibility.Hidden
+      End If
+
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
@@ -578,6 +585,33 @@ Public Class AlarmsPageUC
          String.Compare(sMchTool, m_CurrentMachine.sCurrSaw, True) <> 0 Then
          m_CurrentMachine.sCurrSawing = String.Empty
       End If
+
+      'Dim sVal As String = String.Empty
+      'Dim dVal As Double = 0
+      'If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevLength(dVal)
+      'End If
+      'If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevPerc(dVal)
+      'End If
+
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevLength(dVal)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevPerc(dVal)
+      End If
+
+      ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
       ' aggiorno la lista delle lavorazioni
@@ -1300,4 +1334,53 @@ Public Class AlarmsPageUC
 
    End Sub
 
+   Private Sub ExecLuaBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExecLuaBtn.Click
+      Dim sExecFile As String = GetExecLuaFile()
+      Dim sCallFunction As String = GetCallFunction()
+      ' Recupero file LUA
+      Dim bExec As Boolean = EgtLuaExecFile(sExecFile)
+      ' Lancio l'esecuzione della funzione principale
+      bExec = bExec And EgtLuaCallFunction(sCallFunction)
+      ' Leggo variabili
+      Dim nErr As Integer = 0
+      EgtLuaGetGlobIntVar("CMD.ERR", nErr)
+      ' Reset lua
+      EgtLuaResetGlobVar("CMD")
+      ' Verifico condizioni di errore
+      If nErr <> 0 And bExec Then
+         ' Errore in tastatura lama
+         EgtOutLog("Error in execution file: " & sExecFile & ", calling function: " & sCallFunction & ", CMD.ERR=" & nErr, ToString)
+         Return
+      End If
+   End Sub
+
+   ' Recupero il percorso del file lua da eseguire
+   Private Function GetExecLuaFile() As String
+      Dim sDir As String = String.Empty
+      Dim sFile As String = String.Empty
+      If GetPrivateProfileString(S_EXECLUA, K_DIRSCRIPT_LUA, "", sDir, m_MainWindow.GetMachIniFile()) <> 0 And
+         GetPrivateProfileString(S_EXECLUA, K_FILESCRIPT_LUA, "", sFile, m_MainWindow.GetMachIniFile()) <> 0 Then
+         ' Formatto le stringhe lette
+         sDir = sDir.Trim
+         sFile = sFile.Trim
+         If sDir.EndsWith("\"c) Then
+            sDir = sDir.Remove(sDir.LastIndexOf("\"c))
+         End If
+         If Not sFile.EndsWith(".lua") Then
+            sFile = sFile & ".lua"
+         End If
+         If File.Exists(sDir & "\" & sFile) Then
+            Return sDir & "\" & sFile
+         End If
+      End If
+      Return String.Empty
+   End Function
+
+   ' Recupera il nome della funzione che deve essere chiamata
+   Private Function GetCallFunction() As String
+      Dim sCallFunction As String = "CMD.CmdString"
+      GetPrivateProfileString(S_EXECLUA, K_CALLFUNCTION, sCallFunction, sCallFunction, m_MainWindow.GetMachIniFile())
+      Return sCallFunction
+   End Function
+
 End Class

Machine/CurrentMachine.vb

@@ -609,6 +609,18 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
+            'Dim sVal As String = String.Empty
+            'Dim dVal As Double = m_dFsevLength
+            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, dVal)
+            '   SetFsevLength(dVal)
+            'End If
+            'dVal = m_dFsevPerc
+            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, m_dFsevPerc)
+            '   SetFsevPerc(dVal)
+            'End If
          End If
       End Set
    End Property
@@ -861,9 +873,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevLength = value
+            ' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevLength", m_dFsevLength.ToString, sCurrSawing, false)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevLength", m_dFsevLength.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevLength(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevLength = value
+      End If
+   End Sub
 
    Friend Property dFsevPerc As Double
       Get
@@ -872,9 +893,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevPerc = value
+            '' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSawing)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevPerc(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevPerc = value
+      End If
+   End Sub
 
    Friend ReadOnly Property ToolChangerNbr As Integer
       Get
@@ -1265,6 +1295,7 @@ Public Class CurrentMachine
 
       ' Leggo dati per feed ridotta all'inizio/fine dei tagli
       m_bFsevEnable = (GetPrivateProfileInt(S_NEST, K_MACH_CUTFSEVENABLE, 0, sMachIniFile) <> 0)
+      ' sposto la lettura nel DB delle lavorazioni della lama corrente!
       m_dFsevLength = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVLEN, 0, sMachIniFile)
       m_dFsevPerc = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVPERC, 0, sMachIniFile)
 
@@ -1386,6 +1417,142 @@ Public Class CurrentMachine
       Return dMaxThick
    End Function
 
+#Region "USERNOTE"
+
+   ' recupero le note UserNote associate alla LAVORAZIONE Machining
+   Friend Function MdbGetCurrMachiningUserNote(Machining As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtMdbGetCurrMachiningParam(MCH_MP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+      Return UserNotes
+   End Function
+
+   ' recupero le note UserNote associate all'UTENSILE Tool
+   Friend Function TdbGetCurrToolUserNote(Tool As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(CurrTool)
+      End If
+      Return UserNotes
+   End Function
+
+   ' imposta il nuovo valore in UserNote della LAVORAZIONE Machining
+   Friend Sub MdbSetCurrMachiningUserNote(sKeyUserNote As String, sValUserNote As String, Machining As String)
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtMdbSetCurrMachiningParam(MCH_MP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Machining))
+         EgtMdbSaveCurrMachining()
+         EgtMdbSave()
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+   End Sub
+
+   ' imposta il nuovo valore in UserNote dell'UTENSILE Tool
+   Friend Sub TdbSetCurrToolUserNote(sKeyUserNote As String, sValUserNote As String, Tool As String)
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Tool))
+         EgtTdbSaveCurrTool()
+         EgtTdbSave()
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(Tool)
+      End If
+   End Sub
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteMachinig(Machining As String) As String()
+      Dim sUserNotes As String = MdbGetCurrMachiningUserNote(Machining)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteTool(Tool As String) As String()
+      Dim sUserNotes As String = TdbGetCurrToolUserNote(Tool)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' recupera il valore della associato alla chiave per la lavorazione oppure utensile (bIsToolNote)
+   Friend Function GetUserNote(sKeyUserNote As String, ByRef sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As Boolean
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      If IsNothing(sUserNotesList) Then Return False
+      For Index As Integer = 0 To sUserNotesList.Count - 1
+         Dim sNote As String() = sUserNotesList(Index).Split("="c)
+         If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+            sValUserNote = sNote(1).Trim
+         End If
+      Next
+      Return True
+   End Function
+
+   ' ricostruisce la stringa UserNote da salvare
+   Friend Function AssembUserNote(sKeyUserNote As String, sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As String
+      Dim sUserNotes As String = String.Empty
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      Dim bExists As Boolean = False
+      If Not IsNothing(sUserNotesList) Then
+         For Index As Integer = 0 To sUserNotesList.Count - 1
+            Dim sNote As String() = sUserNotesList(Index).Split("="c)
+            If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+               sUserNotesList(Index) = sKeyUserNote & "=" & sValUserNote
+               bExists = True
+               Exit For
+            End If
+         Next
+         ' riassemblo la stringa
+         For Each Item As String In sUserNotesList
+            If Not String.IsNullOrWhiteSpace(Item) Then
+               sUserNotes &= Item & ";"
+            End If
+         Next
+      End If
+      If Not bExists Then
+         sUserNotes &= sKeyUserNote & "=" & sValUserNote & ";"
+      End If
+      Return sUserNotes
+   End Function
+
+#End Region    ' USERNOTE
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)

MainWindow.xaml.vb

@@ -2,6 +2,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtPHOTOLib
 Imports System.ComponentModel
 Imports System.Threading
 Imports System.Windows.Threading
@@ -320,11 +321,13 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
+      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2411, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
+                            EgtGetKeyOptions(9423, 2411, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -498,6 +501,64 @@ Class MainWindow
       AddHandler m_ProdLineTimer.Tick, AddressOf OnProdLine
       ' Imposto riferimento a funzione delle textbox che disattiva scene in libreria
       EgtWPFLib.EgtTextBox.m_refScenesIsEnabled = AddressOf IsEnabledScenes
+
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+      If GetPrivateProfileInt(S_SCRAPS, K_ENABLESCRAPS, 0, GetIniFile()) <> 0 Then
+         ' leggo il direttorio in cui cercare il database delle lastre
+         Dim PhotDir As String = String.Empty
+         GetPrivateProfileString(S_SCRAPS, K_PHOTODIR, "", PhotDir, GetIniFile())
+         ' verifico che esista il file "OmagPHOTOVb.sqlite" nel direttorio inidicato
+         If System.IO.File.Exists(PhotDir.Trim & "\" & DB_FILENAME) Then
+
+            If Not ManageDb.ConnectToDb(PhotDir.Trim & "\" & DB_FILENAME) Then
+               EgtOutLog("Error connecting to DB: " & PhotDir.Trim & "\" & DB_FILENAME)
+               ' coumico che il grezzo contiene un pezzo e quindi non può essere definito come grezzo
+               m_CurrentProjectPageUC.ClearMessage()
+               m_CurrentProjectPageUC.SetErrorMessage("Denied connection SlabDB")
+            Else
+               ' Impostazione direttorio per backup
+               Dim BackUpDir As String = m_sDataRoot & "\BackUp"
+               Directory.CreateDirectory(BackUpDir)
+               EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
+               EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
+               EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
+               EgtPHOTOLib.MainData.SetPhotoDir(PhotDir)
+               EgtPHOTOLib.MainData.SetBackUpDir(BackUpDir)
+               EgtPHOTOLib.MainData.SetIsOMagCUT(True)
+               Dim sLastBlock As String = String.Empty
+               GetPrivateProfileString(S_SCRAPS, K_LASTBLOCK, "", sLastBlock, GetIniFile())
+               If Not String.IsNullOrEmpty(sLastBlock) Then
+                  EgtPHOTOLib.MainData.SetLastBlock(sLastBlock)
+               End If
+
+               If GetPrivateProfileInt(S_SCRAPS, K_ENABLE_PRINTER, 0, GetIniFile()) = 1 Then
+                  ' leggo nome file prn (per stampante zebra)
+                  Dim m_TemplateFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_TEMPLATE, m_sDataRoot & "\Label\Default.prn", m_TemplateFilePrinter, GetIniFile())
+                  ' leggo nome del direttorio in cui scrivere il file ini (per stampante zebra) -- solo se si desidera scrivere il file in un direttorio diverso
+                  Dim m_DatFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_DAT, m_sDataRoot & "\Temp", m_DatFilePrinter, GetIniFile())
+                  ' leggo nome file exe (per stampante zebra)
+                  Dim m_ZebraUtilitiesExe As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_ZEBRAUTILITIES, System.AppDomain.CurrentDomain.BaseDirectory & "ZebraPrinterUtilitiesR32.exe", m_ZebraUtilitiesExe, GetIniFile())
+                  EgtPHOTOLib.MainData.SetTemplateFilePrinter(m_TemplateFilePrinter)
+                  EgtPHOTOLib.MainData.SetDataFilePrinter(m_DatFilePrinter)
+                  EgtPHOTOLib.MainData.SetZebraPrinterExe(m_ZebraUtilitiesExe)
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(True)
+               Else
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(False)
+               End If
+
+               ' è permessa una sola istanza alla volta del programma OmagCUT -> "(1)" : "(" & nIstance.ToString & ")"
+               EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (1)")
+                  Dim sIdKey As String = String.Empty
+                  EgtGetKeyInfo(sIdKey)
+                  EgtPHOTOLib.MainData.SetKey(sIdKey)
+               End If
+            End If
+      End If
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -546,6 +607,16 @@ Class MainWindow
       m_WorkInProgressPageUC.Prepare()
       m_WorkInProgressPageUC.UpdateTools()
 
+      Dim sVal As String = String.Empty
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevLength)
+         m_CurrentMachine.SetFsevLength(m_CurrentMachine.dFsevLength)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevPerc)
+         m_CurrentMachine.SetFsevPerc(m_CurrentMachine.dFsevPerc)
+      End If
+
       ' Se macchina fotografica abilitata, ne inizializzo il gestore
 #If Not TRIAL Then
       If GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) Then

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.7.1")>
+<Assembly: AssemblyVersion("2.4.11.1")>
-<Assembly: AssemblyFileVersion("2.4.7.1")>
+<Assembly: AssemblyFileVersion("2.4.11.1")>

NcComm/CNCommunication.vb

@@ -581,6 +581,7 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -607,6 +608,7 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
 
          End If

OmagCUT.vbproj

@@ -115,6 +115,9 @@
     <Reference Include="AxInterop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\AxInterop.FXLib.dll</HintPath>
     </Reference>
+    <Reference Include="EgtPHOTOLib">
+      <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
+    </Reference>
     <Reference Include="EgtUILib, Version=2.3.4.5, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
@@ -143,6 +146,10 @@
     </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
+    <Reference Include="System.Data.SQLite, Version=1.0.112.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=x86">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\System.Data.SQLite.dll</HintPath>
+    </Reference>
     <Reference Include="System.Drawing" />
     <Reference Include="System.Windows.Forms" />
     <Reference Include="System.Xml.Linq" />
@@ -210,6 +217,15 @@
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="Project\AddToDataBaseUC.xaml.vb">
+      <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\OmagPhotoWD.xaml.vb">
+      <DependentUpon>OmagPhotoWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\ScrapsWD.xaml.vb">
+      <DependentUpon>ScrapsWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Project\StartLauncheWD.xaml.vb">
       <DependentUpon>StartLauncheWD.xaml</DependentUpon>
     </Compile>
@@ -460,6 +476,18 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="Project\AddToDataBaseUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\OmagPhotoWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\ScrapsWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Project\StartLauncheWD.xaml">
     </Page>
     <Page Include="Project\CicloStartWD.xaml">
@@ -1268,6 +1296,9 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\Ponticelli_delete.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Parking.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDictionary.xaml

@@ -208,6 +208,7 @@
     <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
     <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
     <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+    <BitmapImage x:Key="ParkingImg" UriSource="Resources/NewIcons/Parking.png"></BitmapImage>
 
 
     <!--Frame-->

Project/AddToDataBaseUC.xaml

@@ -0,0 +1,95 @@
+<UserControl x:Class="AddToDataBaseUC"
+            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+            xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+            xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+            xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+            mc:Ignorable="d" 
+            d:DesignHeight="853.3" d:DesignWidth="1280">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="2.5*"/>
+                <ColumnDefinition Width="0.25*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+            <!--Nome BLOCCO-->
+            <TextBlock Name="BlockTxBl" Grid.Column="1" Grid.Row="1" Text="Name block"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="BlockTxBx" Grid.Column="3" Grid.Row="1"
+                  Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--Numero ID-->
+            <TextBlock Name="NbrIdTxBl" Grid.Column="1" Grid.Row="3" Text="ID"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="NbrIdTxBx" Grid.Column="3" Grid.Row="3"
+                  Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--STATE-->
+            <TextBlock Name="StateTxBl" Grid.Column="1" Grid.Row="5" Text="State"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <ComboBox Name="StateCmBx" Grid.Column="3" Grid.Row="5" Style="{StaticResource OmagCut_LeftComboBoxInBorder}">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+            <!--PROJECT-->
+            <TextBlock Name="ProjectNameTxBl" Grid.Column="1" Grid.Row="7" Text="Project"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="ProjectTxBx" Grid.Column="3" Grid.Row="7" 
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--MATERIAL-->
+            <TextBlock Name="MatTxBl" Grid.Column="1" Grid.Row="9" Text="Mat"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="MatTxBx" Grid.Column="3" Grid.Row="9" 
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}" IsEnabled="False"/>
+            <!--THICKNESS-->
+            <TextBlock Name="ThicknessTxBl" Grid.Column="1" Grid.Row="11" Text="Thickness"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="ThicknessTxBx" Grid.Column="3" Grid.Row="11"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <!--WAREHOUSE-->
+            <TextBlock Name="WarehouseTxBl" Grid.Column="1" Grid.Row="13" Text="Warehouse position"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="WarehouseTxBx" Grid.Column="3" Grid.Row="13"
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+
+            <!--CANCEL-->
+            <Button Name="CacelBtn" Grid.Column="1" Grid.Row="15" Content="Delete"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <!--ADD-->            
+            <Button Name="AddBtn" Grid.Column="3" Grid.Row="15" Content="Add"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <!--PRINT-->
+            <Button Name="PrintBtn" Grid.Column="1" Grid.Row="17" Content="Print"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            
+        </Grid>
+
+    </Border>
+
+</UserControl>

Project/AddToDataBaseUC.xaml.vb

@@ -0,0 +1,121 @@
+Imports EgtUILib
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class AddToDataBaseUC
+
+   Private m_OmagPhotoWD As OmagPhotoWD
+
+#Region "PROPERTY"
+   Private Sub BlockTxBx_EgtClosed(sender As Object, e As EventArgs) Handles BlockTxBx.EgtClosed
+      ' assegno il dato alla classe inizializzata nella libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock = BlockTxBx.Text
+      ' devo riasseganre il valore dell'indice
+      NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+      EnableButtons()
+   End Sub
+
+   Private Sub NbrIdTxBx_EgtClosed(sender As Object, e As EventArgs) Handles NbrIdTxBx.EgtClosed
+      ' assegno il dato alla classe inizializzata nella libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID = NbrIdTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub StateCmBx_Changed() Handles StateCmBx.SelectionChanged
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.State = StateCmBx.SelectedIndex
+      EnableButtons()
+   End Sub
+
+   Private Sub ProjectTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ProjectTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo = ProjectTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub ThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ThicknessTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness = ThicknessTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub WarehouseTxBx_EgtClosed(sender As Object, e As EventArgs) Handles WarehouseTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.WarehousePosition = WarehouseTxBl.Text
+      EnableButtons()
+   End Sub
+#End Region    ' Property
+
+   Sub New(LocalOmagPhotoWD As OmagPhotoWD)
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_OmagPhotoWD = LocalOmagPhotoWD
+   End Sub
+
+   ' dopo la crezione della pagina imposto lo stato dei pulsanti
+   Private Sub PostLoaded() Handles Me.Loaded
+      If EgtPHOTOLib.MainData.bEnableTextId Then
+         BlockTxBx.Visibility = Visibility.Collapsed
+         BlockTxBl.Visibility = Visibility.Collapsed
+      Else
+         NbrIdTxBx.IsEnabled = False
+      End If
+      PrintBtn.IsEnabled = EgtPHOTOLib.MainData.bEnablePrinter
+      EnableButtons()
+   End Sub
+
+#Region "COMMAND"
+   Private Sub CancelBtn_Click() Handles CacelBtn.Click
+      ' se è stata inserita nel DB allora devo rimuoverla ed esco dalla pagina
+      EgtPHOTOLib.refOptionPanelVM.Delete()
+      ' notifico che il grezzo è stato rimosso 
+      OmagPhotoWD.m_IsDeleted = True
+      ' notifico che il grezzo non è stato aggiunto al DB delle lastre
+      OmagPhotoWD.m_IsAdded = False
+      ' elimino l'identificativo usato nel database del grezzo appena inserito
+      OmagPhotoWD.m_sDtBsId = ""
+      ' esco dalla pagina
+      m_OmagPhotoWD.Close()
+   End Sub
+
+   Private Sub AddBtn_Click() Handles AddBtn.Click
+      ' se non sono validi i campi allora attendo
+      If Not EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled Then Return
+      ' modalità di funzionamento della libreria: ProjectSlabVM.ProjectModeOpt.NEWSLAB
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.Save()
+      ' notifico che il grezzo è stato aggiunto al DB delle lastre
+      OmagPhotoWD.m_IsAdded = True
+      ' salvo l'identificativo usato nel database del grezzo appena inserito
+      OmagPhotoWD.m_sDtBsId = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+      ' salvo il nome del blocco che è stato utilizzato
+      If Not EgtPHOTOLib.MainData.bEnableTextId Then
+         WritePrivateProfileString(S_SCRAPS, K_LASTBLOCK, EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock, m_OmagPhotoWD.m_MainWindow.GetIniFile())
+      End If
+      ' aggiorno il testo del messaggio "Add" → "Save"
+      AddBtn.Content = "Save"
+
+      ' notifico che da ora la lastra inserita è in modalità di modifica (non salvo la lastra come nuova, ma la sovrascrivo come in modifica)
+      EgtPHOTOLib.PhotoMap.refProjectVM.SetSelProjectMode(ProjectSlabVM.ProjectModeOpt.DETAIL)
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.SetOrigValues()
+
+      ' notifico che la lastra è in modifica da questo programma
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.IsSelected = EgtPHOTOLib.MainData.nKey
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+   End Sub
+
+   Private Sub PrintBtn_Click() Handles PrintBtn.Click
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.PrintLabel()
+   End Sub
+#End Region    ' Command
+
+#Region "METHODS"
+   Private Sub EnableButtons()
+      AddBtn.IsEnabled = EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled
+      ' se la stampante non è abilitata allora non permetto assolutamente di abilitare il comando
+      If EgtPHOTOLib.MainData.bEnablePrinter Then
+         PrintBtn.IsEnabled = EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled
+      End If
+
+   End Sub
+#End Region    ' Methods
+
+End Class

Project/CurrentProjectPageUC.xaml.vb

@@ -107,7 +107,8 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         If Not CurrentProjectScene.Init() Then
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
             ' Flag per riavvio programma
@@ -158,6 +159,7 @@ Public Class CurrentProjectPageUC
 #End If
             m_MainWindow.Close()
             If bRestart Then Process.Start(Application.ResourceAssembly.Location)
+            Return
          End If
          ' visualizzazione avanzata dei triangoli costituenti le superfici
          Dim bShowTriaAdv As Boolean = (GetPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -168,11 +170,6 @@ Public Class CurrentProjectPageUC
          ' dimensione lineare max in pixel delle textures
          Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())
          EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
-         ' Verifico abilitazione prodotto
-         If Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Then
-            Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 5), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL, 1)
-            m_MainWindow.Close()
-         End If
          ' Recupero e imposto handle finestra principale
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
@@ -399,6 +396,8 @@ Public Class CurrentProjectPageUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       m_dRawHeight = 0
       UpdateHeightTxBx()
+      ' prima di parcheggiare svuoto dei pezzi in parcheggio sia vuota
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ResetListOfGruopInPark()
       ' Parcheggio correttamente i pezzi precedentemente salvati
       Dim nId2 As Integer = EgtGetFirstPart()
       While nId2 <> GDB_ID.NULL
@@ -410,7 +409,7 @@ Public Class CurrentProjectPageUC
          nId2 = EgtGetNextPart(nId2)
       End While
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      SetTotalArea( dTotArea)
+      SetTotalArea(dTotArea)
       UpdateToProduceArea()
       ShowAreas()
       ' Dichiaro progetto non modificato

Project/OmagPhotoWD.xaml

@@ -0,0 +1,40 @@
+<Window x:Class="OmagPhotoWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        xmlns:OmagCUT="clr-namespace:OmagCUT"
+        xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"               
+        xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OmagPHOTO" Height="700" Width="1250" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" >
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid Name="OptionSLabGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="10*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="10*"/>
+                <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
+            
+            <!-- nel codice mi occupo di riempire la griglia con gli UserControl -->
+            
+            <Button Name="ExitBtn" Grid.Column="2" Grid.Row="3"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <DockPanel Grid.Column="1" Grid.Row="1" Visibility="Hidden">
+                <!--StatusBar-->
+                <EgtWPFLib5:StatusBarV DataContext="{StaticResource StatusBarVM}" DockPanel.Dock="Bottom"/>
+            </DockPanel>
+        </Grid>
+    </Border>
+</Window>

Project/OmagPhotoWD.xaml.vb

@@ -0,0 +1,171 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class OmagPhotoWD
+   ' Riferimento alla MainWindow
+   Friend m_MainWindow As MainWindow
+
+   Private m_AddToDataBaseUC As AddToDataBaseUC
+   Private m_StateList As New List(Of EgtWPFLib5.IdNameStruct)
+
+   ' il contorno dell sfrido è definito a partire dai punti che rappresentano i vertici dello stesso
+   Private m_ContornScrap As New List(Of Point3d)
+   ' se lo stato della lastra è "2" significa che è già stata inserita nel DB (non devo generare una nuova foto!)
+   Private m_nState As Integer = 1
+   ' salvo il nome del file *.jpg 
+   Private m_sFileImage As String = String.Empty
+
+   ' definsce se il slavataggio è andato a buon fine (questa variabile deve esistere anche dopo la chiusura della finestra!)
+   Public Shared m_IsAdded As Boolean = False
+   Public Shared m_sDtBsId As String = ""
+   Public Shared m_bSlabIsSelected As Boolean = False
+
+   ' definisce se il grezzo è stato eliminato dal DB
+   Public Shared m_IsDeleted As Boolean = False
+
+   Public Sub New(sImage As String, ContornScrap As List(Of Point3d), MnWindow As MainWindow, nState As Integer, DatabaseID As String)
+
+      InitializeComponent()
+
+      ' salvo il riferimento della finestra principale
+      m_MainWindow = MnWindow
+      ' leggo lo stato dello sfrido per decidere quale modalità di apertuta usare
+      m_nState = nState
+
+      '--------------- CARCICO lastra esistente ---------------
+      If m_nState = 2 Then
+         m_bSlabIsSelected = False
+         ' ricerco l'elemento già inserito nel DB
+         For Each Item As Slab In EgtPHOTOLib.refProjectVM.SlabList
+            Dim CurrId As String = Item.GetCurrentID.Trim
+            If Item.GetCurrentID.Trim = DatabaseID.Trim Then
+               EgtPHOTOLib.refProjectVM.SelSlab = Item
+               m_bSlabIsSelected = True
+               Exit For
+            End If
+         Next
+         ' se non trovo nessun elemento nel db allora esco
+         If IsNothing(EgtPHOTOLib.refProjectVM.SelSlab) Then
+            EgtOutLog("ID is not found in database: " & DatabaseID)
+            m_bSlabIsSelected = False
+            Return
+         End If
+         ' procedo alla visualizzazione della pagina
+         EgtPHOTOLib.PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.DETAIL
+         ' carico la lista degli stati letta dalla libreria
+         For Each Item As EgtWPFLib5.IdNameStruct In EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList
+            m_StateList.Add(Item)
+         Next
+
+         ' notifico che la lastra è in modifica da questo programma
+         EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.IsSelected = EgtPHOTOLib.MainData.nKey
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+
+         ' posiziono la finestra
+         Me.Top = 15
+         Me.Left = 15
+         Return
+      End If
+
+      '--------------- DEFINSCO nuova lastra esistente ---------------
+      ' imposto come prima pagina sempre la lista (per inizializzare gli elementi della libreria) → ACCELERARE il processo di creazione di questo oggetto!
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.NEWSLAB
+      ' imposto il percoso della foto appena generato
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ImagePath = sImage
+      ' carico la foto come texture
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.PostPhoto(sImage, "")
+      ' carico l'elenco dei materiali (non serve...)
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SetMaterialFromDB()
+      ' definisco la lista degli stati
+      For Each Item As EgtWPFLib5.IdNameStruct In EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList
+         m_StateList.Add(Item)
+      Next
+
+      ' imposto i dati lastra
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness = m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight
+      ' carico la lista degli stati letta dalla libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelState = EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList(0)
+      ' ricorco il materiale corrente nell'elenco dei materiali presenti nel DB (se non presente nell'elenco?)
+      For Each MaterialItem As String In EgtPHOTOLib.PhotoMap.refOptionPanelVM.MaterialList
+         If MaterialItem.ToLower = m_MainWindow.m_CurrentMachine.CurrMat.sName.ToLower Then
+            EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Material = MaterialItem
+            Exit For
+         End If
+      Next
+
+      ' salvo in locale i punti che arrivano dal progetto
+      m_ContornScrap = ContornScrap
+      ' avvio la finestra di modifica
+      Dim m_refImagePrevieV As New EgtPHOTOLib.ImagePreviewV()
+      ' modifico l'immagine e salvo
+      m_refImagePrevieV.SetContourScraps(m_ContornScrap)
+      m_refImagePrevieV.Show()
+      m_refImagePrevieV.SaveImage()
+      m_refImagePrevieV.Close()
+      m_bSlabIsSelected = True
+
+      ' posiziono la finestra
+      Me.Top = 15
+      Me.Left = 15
+   End Sub
+
+   ' posizionamento degli UserControl all'interno della griglia
+   Private Sub OmagPhotoWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' definisco nella pagina la posizione dello UserControl e inizializzo le liste
+      m_AddToDataBaseUC = New AddToDataBaseUC(Me)
+      m_AddToDataBaseUC.SetValue(Grid.ColumnProperty, 0)
+      m_AddToDataBaseUC.SetValue(Grid.RowProperty, 1)
+      m_AddToDataBaseUC.SetValue(Grid.RowSpanProperty, 2)
+      Me.OptionSLabGrid.Children.Add(m_AddToDataBaseUC)
+      m_AddToDataBaseUC.StateCmBx.ItemsSource = m_StateList
+      ' recupero la scena dalla libreria e la carico nel finestra
+      Dim MyScene As New EgtPHOTOLib.SceneHostSlabV(EgtPHOTOLib.PhotoMap.refSceneHostVM)
+      MyScene.SetValue(Grid.ColumnProperty, 1)
+      MyScene.SetValue(Grid.ColumnSpanProperty, 2)
+      MyScene.SetValue(Grid.RowProperty, 1)
+      Me.OptionSLabGrid.Children.Add(MyScene)
+   End Sub
+
+   ' carcio i dati della lastra
+   Private Sub PostLoaded() Handles Me.Loaded
+      If Not m_bSlabIsSelected Then
+         Return
+      End If
+      ' carico i campi con i dati letti da database
+      If m_nState = 2 Then
+         ' provo ad eseguire la separazione dei campi 
+         m_sDtBsId = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+         m_AddToDataBaseUC.BlockTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock
+         m_AddToDataBaseUC.NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+         m_AddToDataBaseUC.StateCmBx.SelectedIndex = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.State
+         m_AddToDataBaseUC.MatTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Material
+         m_AddToDataBaseUC.ThicknessTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness
+         m_AddToDataBaseUC.ProjectTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo
+         ' aggiorno il testo del messaggio "Add" → "Save"
+         m_AddToDataBaseUC.AddBtn.Content = "Save"
+         Return
+      End If
+      ' inizializzo i campi
+      'm_AddToDataBaseUC.IdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+      m_AddToDataBaseUC.BlockTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock
+      m_AddToDataBaseUC.NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+      m_AddToDataBaseUC.StateCmBx.SelectedIndex = 0
+      m_AddToDataBaseUC.MatTxBx.Text = m_MainWindow.m_CurrentMachine.CurrMat.sName
+      m_AddToDataBaseUC.ThicknessTxBx.Text = LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 4)
+      m_AddToDataBaseUC.ProjectTxBx.Text = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()
+      ' rendo in primo piano la finestra
+      Me.Activate()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' se esista una lastra corrente, notifico che deve essere deselezionata
+      If Not IsNothing(EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab) Then
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.IsSelected = 0
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+      End If
+      Me.Close()
+   End Sub
+
+End Class

Project/ProjectMgrUC.xaml.vb

@@ -494,6 +494,20 @@ Public Class ProjectMgrUC
          End If
          '------------------- FINE Avvio il Ciclo-Start-------------------------
 
+         ' ------------------ INIZIO gestione SCRAPS ---------------------------
+         Dim NewScrapsList As New List(Of Scrap)
+         ' procedo all'aggiornamento della lista degli sfridi
+         UpDateScrapList(NewScrapsList)
+
+         ' se esiste almeno uno sfrido da inserire come nuovo grezzo
+         If NewScrapsList.Count > 0 Then
+            ' apro la finestra con l'elenco degli sfridi
+            Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
+            MyScrapsWD.ShowDialog()
+
+         End If
+         ' ------------------ FINE gestione SCRAPS -----------------------------
+
          ' Altrimenti linea di produzione
       Else
          ' Verifico non sia già stato trasmesso
@@ -665,6 +679,32 @@ Public Class ProjectMgrUC
 #End If
    End Sub
 
+   ' aggiorno la lista dei grezzi/sfridi
+   Public Sub UpDateScrapList(ByRef NewScrapsList As List(Of Scrap))
+      If IsNothing(NewScrapsList) Then
+         NewScrapsList = New List(Of Scrap)
+      Else
+         NewScrapsList.Clear()
+      End If
+      ' procedo all'aggiornamento della lista degli sfridi
+      Dim CurrRawId As Integer = EgtGetFirstRawPart()
+      Dim IsNewScraps As Integer = 0
+      Dim nCountScrap As Integer = 1
+      While CurrRawId <> GDB_ID.NULL
+         If EgtGetInfo(CurrRawId, K_ISNEWSCRAPS, IsNewScraps) Then
+            If IsNewScraps = 1 Or IsNewScraps = 2 Then
+               ' deve essere aggiunto nel DB delle lastre come nuovo grezzo (l'indice è utilizzato per definire il nome della lastra)
+               NewScrapsList.Add(New Scrap(CurrRawId, "Scrap_" & nCountScrap.ToString, IsNewScraps))
+               nCountScrap += 1
+               ' è già stato aggiunto al DB delle lastre come nuovo grezzo
+            Else
+               ' non  è stato definito come nuovo grezzo
+            End If
+         End If
+         CurrRawId = EgtGetNextRawPart(CurrRawId)
+      End While
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 
@@ -938,3 +978,60 @@ Public Class ProjectMgrUC
    End Sub
 
 End Class
+
+Public Class Scrap
+
+   Private m_iPictureID As Integer
+   Private m_sName As String
+   Private m_IdRaw As Integer
+   Private m_nState As Integer
+
+   Public Property PictureID() As Integer
+      Get
+         Return m_iPictureID
+      End Get
+      Set(value As Integer)
+         m_iPictureID = value
+      End Set
+   End Property
+
+   Public Property Name() As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Public ReadOnly Property IdRaw() As Integer
+      Get
+         Return m_IdRaw
+      End Get
+   End Property
+
+   Public ReadOnly Property nState As Integer
+      Get
+         Return m_nState
+      End Get
+   End Property
+
+   Public ReadOnly Property PictureString() As String
+      Get
+         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+      End Get
+   End Property
+
+   Sub New(IdScrap As Integer, NameScrap As String, State As Integer)
+      m_IdRaw = IdScrap
+      m_sName = NameScrap
+      m_nState = State
+      ' immagine del grezzo
+      If m_nState = 2 Then
+         m_iPictureID = 5
+      Else
+         m_iPictureID = 4
+      End If
+   End Sub
+
+End Class

Project/ScrapsWD.xaml

@@ -0,0 +1,50 @@
+<Window x:Class="ScrapsWD"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+    FontFamily="{DynamicResource OmagCut_Font}"
+    Title="Scraps" Height="482.6" Width="226.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="3*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Label Name="TitleTxBl" Grid.Column="1" Grid.Row="1" Foreground="White" FontSize="20" VerticalAlignment="Center"/>
+            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+               ItemsSource="{Binding ItemList, NotifyOnSourceUpdated=True}"/>
+
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

Project/ScrapsWD.xaml.vb

@@ -0,0 +1,186 @@
+Imports EgtUILib
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class ScrapsWD
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refProjectMgrUC As ProjectMgrUC
+
+   Private m_ScrapList As New List(Of Scrap)
+   Private m_CurrScrapId As Integer = GDB_ID.NULL
+   Private m_CurrScrapState As Integer = 2
+   Private m_sDatabaseId As String = ""
+
+   Private Sub Initalized()
+      ' resetto eventuali errori mostrati nella pagina
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+
+      ' inserisco il titolo della pagina aperta
+      TitleTxBl.Content = "Scraps List"
+      ScrapsListBox.ItemsSource = m_ScrapList
+      ' definzione posizione finetra
+      Me.Left = 25
+      Me.Top = 25
+   End Sub
+
+   Public Sub New(Owner As Window, LocalProjectMgrUC As ProjectMgrUC, MyScrapList As List(Of Scrap))
+      Me.Owner = Owner
+      InitializeComponent()
+      m_ScrapList = MyScrapList
+      m_refProjectMgrUC = LocalProjectMgrUC
+      Initalized()
+   End Sub
+
+
+   ' visualizzo la fase del pezzo selezionato
+   Private Sub ScrapListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ScrapsListBox.PreviewMouseUp
+      Dim vItems As Scrap = ScrapsListBox.SelectedItems(0)
+      ' elimino l'utimo selzione
+      EgtResetMark(m_CurrScrapId)
+      EgtDeselectObj(m_CurrScrapId)
+      ' ricerco il grezzo associato a questo Id
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         If nRawId = vItems.IdRaw Then
+            m_CurrScrapId = nRawId
+            m_CurrScrapState = vItems.nState
+            If m_CurrScrapState = 2 Then
+               EgtGetInfo(nRawId, K_DATABASEID, m_sDatabaseId)
+            Else
+               m_sDatabaseId = String.Empty
+            End If
+            Dim nCurrRawPhase As Integer = 0
+            ' recupero la fase del grezzo corrente
+            EgtGetInfo(nRawId, "Ph", nCurrRawPhase)
+            If nCurrRawPhase <> 0 Then
+               ' evidenzio lo sfrido selezionato all'interno della fase
+               EgtSetCurrPhase(nCurrRawPhase)
+               EgtSetMark(m_CurrScrapId)
+               EgtSelectObj(m_CurrScrapId)
+               EgtDraw()
+               Return
+            End If
+         End If
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      If m_CurrScrapId = GDB_ID.NULL Then Return
+      ' creo una copia dell'immagine attuale (fotocamera 1)
+      Dim sImage As String = String.Empty
+      Dim sInfo As String = String.Empty
+      GetPrivateProfileString(S_CAMERA, K_CAM_IMAGE, "", sImage, m_MainWindow.GetIniFile())
+      GetPrivateProfileString(S_CAMERA, K_CAM_INFO, "", sInfo, m_MainWindow.GetIniFile())
+      ' recupero dalla libreria il percoso del database
+      Dim sPhotoDir As String = String.Empty
+      EgtPHOTOLib.GetPhotoDir(sPhotoDir)
+      ' recupero l'ora corrente
+      Dim sDate As String = Date.Now.ToString
+      sDate = sDate.Replace("/", "_")
+      sDate = sDate.Replace(" ", "_")
+      sDate = sDate.Replace(":", "_")
+      Dim sNewPath As String = sPhotoDir & "\Scrap_" & sDate
+      Try
+         File.Copy(sImage, sNewPath & ".jpg", False)
+         File.Copy(sInfo, sNewPath & ".txt", False)
+      Catch ex As Exception
+         EgtOutLog(ex.Message.ToString)
+      End Try
+
+      ' se non esiste la classe StatusBar allora provo ad inizializzarla...
+      If IsNothing(EgtWPFLib5.LibMap.refStatusBarVM) Then
+         Dim objStatusBarVM As New EgtWPFLib5.StatusBarVM
+      End If
+      ' salvo il contesto corrente del programma
+      Dim nCurrentContetxt As Integer = EgtGetCurrentContext()
+      ' costruisco l'elenco ordinato dei punti che reppresentano il contorno del grezzo da salvare
+      Dim ContornScrapList As New List(Of Point3d)
+
+      Dim RefId As New Frame3d
+      Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(m_CurrScrapId, "RawSolid")
+      EgtGetTextureFrame(nRawSolidId, nRawSolidId, RefId)
+      Dim nCurveCompoId As Integer = EgtGetFirstNameInGroup(m_CurrScrapId, "RawOutline")
+      Dim dStart As Double = 0
+      Dim dEnd As Double = 0
+      EgtCurveDomain(nCurveCompoId, dStart, dEnd)
+      Dim ptCurrPoint As Point3d
+      For dU As Integer = dStart To dEnd - 1
+         EgtAtParamPoint(nCurveCompoId, dU, m_CurrScrapId, ptCurrPoint)
+         ptCurrPoint.z = 0
+         ptCurrPoint.ToLoc(RefId)
+         ContornScrapList.Add(ptCurrPoint)
+      Next
+
+      MainData.SetPreviousContext(nCurrentContetxt)
+
+      'If Not IsNothing(MainData.ContextSTONELib) Or MainData.ContextSTONELib <> 0 Then
+      'If MainData.ContextSTONELib <> 0 Then
+      '   EgtSetCurrentContext(MainData.ContextSTONELib)
+      'End If
+
+      ' inizializzo PojectSlabV pechè si occupa di inizializzare le pagine Detail e Option 
+      Dim MyProjectSlab As New EgtPHOTOLib.ProjectSlabV
+      ' ACCELERARE il processo di creazione di questo oggetto!
+      MyProjectSlab.DataContext = New EgtPHOTOLib.ProjectSlabVM
+      ' per ogni creazione della nuova pagina viene creata una nuova scena, ma non viene eliminata
+      Dim refProjectVMSceneContext As Integer = EgtGetCurrentContext()
+
+      ' apro la finestra OmagPHOTO (passo il nome del file come copia dell'originale)
+      If ContornScrapList.Count > 2 Then
+         Dim MyOmagPhotoWD As New OmagPhotoWD(sNewPath & ".jpg", ContornScrapList, m_MainWindow, m_CurrScrapState, m_sDatabaseId)
+         OmagPhotoWD.m_IsAdded = False
+         OmagPhotoWD.m_sDtBsId = String.Empty
+         OmagPhotoWD.m_IsDeleted = False
+         MyOmagPhotoWD.ShowDialog()
+      Else
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Error loading contour scrap")
+      End If
+
+      ' ripristino il contesto corrente dell'immagine
+      EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)
+      ' se l'inserimento è andatoa buon fine allora procedo a notificarlo
+      If OmagPhotoWD.m_IsAdded AndAlso Not String.IsNullOrEmpty(OmagPhotoWD.m_sDtBsId) Then
+         EgtSetInfo(m_CurrScrapId, K_ISNEWSCRAPS, 2)
+         EgtSetInfo(m_CurrScrapId, K_DATABASEID, OmagPhotoWD.m_sDtBsId)
+      Else
+         ' se è stato eliminato dal DB allora aggiorno la lista dei grezzi
+         If OmagPhotoWD.m_IsDeleted Then
+            EgtSetInfo(m_CurrScrapId, K_ISNEWSCRAPS, 1)
+            EgtRemoveInfo(m_CurrScrapId, K_DATABASEID)
+         End If
+         Try
+            File.Delete(sNewPath & ".jpg")
+            File.Delete(sNewPath & ".txt")
+         Catch ex As Exception
+            EgtOutLog(ex.Message.ToString)
+         End Try
+      End If
+
+      '----------------INIZIO ELIMINAZIONE contesti generati da OmagPHOTOLib per la visualizzazione delle Texture
+      EgtDeleteContext(EgtPHOTOLib.MainData.ContextSTONELib)
+      EgtDeleteContext(refProjectVMSceneContext)
+      '----------------  FINE ELIMINAZIONE contesti
+
+      ' aggiorno la lista degli scrap
+      m_refProjectMgrUC.UpDateScrapList(m_ScrapList)
+      ScrapsListBox.ItemsSource = m_ScrapList
+      ScrapsListBox.Items.Refresh()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' resetto eventuali errori mostrati nella pagina
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' deseleziono l'oggetto corrente
+      EgtResetMark(m_CurrScrapId)
+      EgtDeselectObj(m_CurrScrapId)
+      ' reimposto la fase iniziale
+      EgtSetCurrPhase(1)
+      EgtDraw()
+      Me.Close()
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml.vb

@@ -513,6 +513,8 @@ Public Class RawPartPageUC
       End Select
       ' Aggiorno il punto precedente
       m_ptPrev = ptCurr
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBRidges()
    End Sub
 
    Private Sub ModifyRectangle(ptCurr As Point3d)

WorkInProgress/WorkInProgressPageUC.xaml.vb

@@ -309,7 +309,8 @@ Public Class WorkInProgressPageUC
       Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
       WorkInProgressScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
       ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-      If Not WorkInProgressScene.Init() Then
+      Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+      If Not WorkInProgressScene.Init() Or Not bProd Then
          ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
          Me.WorkInProgressPageGrid.Children.Remove(WorkInProgressSceneHost)
          ' Flag per riavvio programma
@@ -360,6 +361,7 @@ Public Class WorkInProgressPageUC
 #End If
          m_MainWindow.Close()
          If bRestart Then Process.Start( Application.ResourceAssembly.Location)
+         Return True
       End If
       ' dimensione lineare max in pixel delle textures
       Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())