Migliorata gestione avvio programma CameraMng

CAM/CamAuto.vb

@@ -154,6 +154,7 @@ Friend Module CamAuto
       Return ResetAllMachinings(nWarn)
    End Function
 
+   ' Ricalcola tutte le lavorazioni
    Friend Function ResetAllMachinings(ByRef nWarn As Integer) As Boolean
       ' Cancello tutte le lavorazioni
       EraseMachinings(GDB_ID.NULL)
@@ -170,6 +171,7 @@ Friend Module CamAuto
       Return True
    End Function
 
+   ' Elimina da ogni entità il nome della lavorazione asseganta
    Friend Function RestoreDef_Machinig(Optional bOnlySideAng As Boolean = True)
       Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
       Dim bApplySawingTilted As Boolean = m_MainWindow.m_CurrentMachine.bApplySawingTilted
@@ -180,6 +182,11 @@ Friend Module CamAuto
          Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
          Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
          SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         'nIdLayerOutLoop = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP & ".orig")
+         'If nIdLayerOutLoop <> GDB_ID.NULL Then
+         '   nEntId = EgtGetFirstInGroup(nIdLayerOutLoop)
+         '   SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         'End If
          nIdPart = EgtGetNextPart(nIdPart)
       End While
       Dim nRawId As Integer = CamAuto.GetCurrentRaw()
@@ -189,6 +196,11 @@ Friend Module CamAuto
          Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
          Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
          SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdLayerOutLoop = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP & ".orig")
+         If nIdLayerOutLoop <> GDB_ID.NULL Then
+            nEntId = EgtGetFirstInGroup(nIdLayerOutLoop)
+            SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         End If
          nIdPart = EgtGetNextPartInRawPart(nIdPart)
       End While
       Return bOk

CadCuts/SplitPageUC.xaml.vb

@@ -916,6 +916,8 @@ Public Class SplitPageUC
       Next
       m_CurrFirstInd = m_ItemList.IndexOf(ItemList(0))
       m_CurrLastInd = m_ItemList.IndexOf(ItemList(ItemList.Count - 1))
+      ' Aggiorno lo stato dei bottoni
+      UpdateEnableMoveBtn()
       EgtDraw()
    End Sub
 
@@ -932,7 +934,9 @@ Public Class SplitPageUC
       If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
       Dim Index As Integer = MachiningLsBx.SelectedIndex
       If Index = -1 Then Return
-      ChangeMachinig(m_MachiningList(Index).m_nId)
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+         ChangeMachinig(m_MachiningList(Index).m_nId)
+      End If
    End Sub
 
    Private Sub MoveUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles MoveUpBtn.Click
@@ -962,11 +966,27 @@ Public Class SplitPageUC
       End If
    End Sub
 
+   ' Uno spostamento è possibile solo se la pozione di arrivo è un taglio dello stesso tipo (FinalCut)
+   Private Sub UpdateEnableMoveBtn()
+      If Not MoveUpBtn.IsEnabled And Not MoveDownBtn.IsEnabled Then Return
+
+      ' MOVE UP (-1)
+      Dim OldItem As SplitMach = m_MachiningList(m_CurrFirstInd - 1)
+      Dim NewItem As SplitMach = m_MachiningList(m_CurrLastInd)
+      MoveUpBtn.IsEnabled = Not (OldItem.m_bFinalCut Or NewItem.m_bFinalCut) Or (OldItem.m_bFinalCut And NewItem.m_bFinalCut)
+
+      ' MOVE DOWN (1)
+      OldItem = m_MachiningList(m_CurrLastInd + 1)
+      NewItem = m_MachiningList(m_CurrFirstInd)
+      MoveDownBtn.IsEnabled = Not (OldItem.m_bFinalCut Or NewItem.m_bFinalCut) Or (OldItem.m_bFinalCut And NewItem.m_bFinalCut)
+   End Sub
+
    Private Sub MoveItem(direction As Integer)
       ' Checking selected item
       If m_CurrFirstInd = -1 OrElse MachiningLsBx.SelectedIndex < 0 Then
          Return
       End If
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
 
       ' Se la direzione è giù
       If direction = 1 And m_CurrLastInd < m_ItemList.Count - 1 Then
@@ -990,7 +1010,8 @@ Public Class SplitPageUC
          m_CurrFirstInd -= 1
          m_CurrLastInd -= 1
       End If
-
+      ' Aggiorno lo stato dei bottoni
+      UpdateEnableMoveBtn()
       ' Imposto flag di modifica
       m_bModified = True
    End Sub
@@ -1371,7 +1392,7 @@ Public Class SplitPageUC
 
             ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
             If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
-               EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+               EgtOutLog("L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama")
             Else
 
                EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -1448,7 +1469,7 @@ Public Class SplitPageUC
 
          ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
          If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
-            EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            EgtOutLog("L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama")
          Else
 
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -1490,7 +1511,7 @@ Public Class SplitPageUC
 
             ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
             If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
-               EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+               EgtOutLog("L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama")
             Else
 
                EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -1567,7 +1588,7 @@ Public Class SplitPageUC
 
          ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
          If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
-            EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            EgtOutLog("L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama")
          Else
 
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -1670,7 +1691,7 @@ Public Class SplitPageUC
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dPrevAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
 
             If Not m_MachiningList(nI).m_bCanStartAll Then
-               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               EgtOutLog("Il taglio non puo' essere allungato all'interno del pezzo")
                Return
             End If
 
@@ -1850,7 +1871,7 @@ Public Class SplitPageUC
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dNextAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
 
             If Not m_MachiningList(nI).m_bCanEndAll Then
-               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               EgtOutLog("Il taglio non puo' essere allungato all'interno del pezzo")
                Return
             End If
 

Constants/ConstMachIni.vb

@@ -12,24 +12,34 @@
    Public Const K_SIMULATIONAXESNUM As String = "SimulationAxesNum"
    Public Const K_L1NAME As String = "L1Name"
    Public Const K_L1ID As String = "L1Id"
+   Public Const K_L1TYPE As String = "L1Type"
    Public Const K_L2NAME As String = "L2Name"
    Public Const K_L2ID As String = "L2Id"
+   Public Const K_L2TYPE As String = "L2Type"
    Public Const K_L3NAME As String = "L3Name"
    Public Const K_L3ID As String = "L3Id"
+   Public Const K_L3TYPE As String = "L3Type"
    Public Const K_R1NAME As String = "R1Name"
    Public Const K_R1ID As String = "R1Id"
+   Public Const K_R1TYPE As String = "R1Type"
    Public Const K_R2NAME As String = "R2Name"
    Public Const K_R2ID As String = "R2Id"
+   Public Const K_R2TYPE As String = "R2Type"
    Public Const K_A6NAME As String = "A6Name"
    Public Const K_A6ID As String = "A6Id"
+   Public Const K_A6TYPE As String = "A6Type"
    Public Const K_A7NAME As String = "A7Name"
    Public Const K_A7ID As String = "A7Id"
+   Public Const K_A7TYPE As String = "A7Type"
    Public Const K_A8NAME As String = "A8Name"
    Public Const K_A8ID As String = "A8Id"
+   Public Const K_A8TYPE As String = "A8Type"
    Public Const K_A9NAME As String = "A9Name"
    Public Const K_A9ID As String = "A9Id"
+   Public Const K_A9TYPE As String = "A9Type"
    Public Const K_A10NAME As String = "A10Name"
    Public Const K_A10ID As String = "A10Id"
+   Public Const K_A10TYPE As String = "A10Type"
    Public Const K_DELTA_C As String = "DeltaC"
    Public Const K_ININCHES As String = "InInches"
    Public Const K_CPOS As String = "CPos"

DrawImport/DrawPageUC.xaml.vb

@@ -1563,10 +1563,15 @@ Public Class DrawPageUC
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
 
       End Select
-
       ' Pulisco l'ambiente lua
       ResetLuaVariables()
 
+      Try
+         VariablesGrd.Children.Remove(m_CompoDimension)
+      Catch ex As Exception
+         Dim x As Boolean = True
+      End Try
+
    End Sub
 
    Private Class CompoVar

DrawImport/SideAngleUc.xaml.vb

@@ -167,7 +167,42 @@ Public Class SideAngleUC
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
-      TxBlChBxView()
+      ' Controllo se la checkbox SideAngle è attiva
+      If SideAngleChBx.IsChecked Then
+         Dim dSideAngle As Double = 0
+         Dim dHell As Double = 0
+         ' Controllo se l'angolo della nuova entità non è nullo
+         If Not String.IsNullOrEmpty(NewA1TxBx.Text) Then
+            StringToDouble(NewA1TxBx.Text, dSideAngle)
+            ' Controllo se l'angolo è diverso da 0
+            If dSideAngle <> 0 Then
+               ' Aggiorno l'angolo delle entità
+               UpdateSideAngleAllEntities()
+            End If
+         End If
+         ' Controllo se il tallone della nuova entità non è nullo
+         If Not String.IsNullOrEmpty(NewH1TxBx.Text) Then
+            StringToDouble(NewH1TxBx.Text, dHell)
+            ' Controllo se il tallone è maggiore di 0
+            If dHell > 0 Then
+               ' Aggiorno il tallone delle entità
+               UpdateHeelAllEntities()
+            End If
+         End If
+         ' Elimino le righe per riposizionarle
+         Grid.SetRow(NewEntity, MAX_LINES - m_nShow + 1)
+         Grid.SetRow(NewA1TxBx, MAX_LINES - m_nShow + 1)
+         Grid.SetRow(NewH1TxBx, MAX_LINES - m_nShow + 1)
+
+         Grid.SetRow(SideAngleBl, MAX_LINES - m_nShow)
+         Grid.SetRow(HeelBl, MAX_LINES - m_nShow)
+         Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+         ' Rendo visibile solo la nuova entità
+         CollapsedCheckAllTextSideAng()
+      Else
+         ' Altrimenti eseguo impaginazione classica
+         TxBlChBxView()
+      End If
 
       ' Aggiorno valori
       If m_Mode = ModeOpt.DRIP Then
@@ -406,10 +441,16 @@ Public Class SideAngleUC
       Grid.SetRow(NewA1TxBx, MAX_LINES - m_nShow + 1)
       Grid.SetRow(NewH1TxBx, MAX_LINES - m_nShow + 1)
 
-      NewEntity.Text = "A#"
       ' Se interrompo la creazione di un unico SideAng
       If Not GetSideAngleFromAllEntities() Then Return
 
+      CollapsedCheckAllTextSideAng()
+   End Sub
+
+   ' Rende visibile NewEntity quando si attiva la spunta sulla checkbox
+   Private Sub CollapsedCheckAllTextSideAng()
+      NewEntity.Text = "A#"
+
       PrevBtn.Visibility = Visibility.Collapsed
       NextBtn.Visibility = Visibility.Collapsed
 
@@ -1465,7 +1506,7 @@ Public Class SideAngleUC
          EgtSetInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE, dSideAngle)
          EgtSetInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE, dSideAngle)
          Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
-         If Not String.IsNullOrEmpty(sSawingTilted) Then
+         If Not String.IsNullOrEmpty(sSawingTilted) And m_MainWindow.m_CurrentMachine.bApplySawingTilted Then
             EgtSetInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED, sSawingTilted)
          End If
          ' Cancello inclinazione nell'apposito campo info

Machine/Alarms2PageUC.xaml

@@ -16,7 +16,7 @@
             <ColumnDefinition Width="3*"/>
          </Grid.ColumnDefinitions>
          <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
+            <RowDefinition Height="Auto"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="1.5*"/>
             <RowDefinition Height="0.5*"/>
@@ -27,7 +27,9 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         <GroupBox Name="FinalSawCutGpBx" Style="{DynamicResource OmagCut_GroupBox}">
+         <!--Parametri Taglio Lama: 5 Parametri-->
+         <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.RowSpan="4" Margin="5,0,5,0">
+            <!--definizione della grigli ainterna-->
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -36,23 +38,182 @@
                <Grid.RowDefinitions>
                   <RowDefinition Height="0.5*"/>
                   <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
                </Grid.RowDefinitions>
 
-               <TextBlock Name="EnableFinalSawCutTxBl" Grid.Column="0" Grid.Row="0"
+               <TextBlock Name="CutExtraLenTxBl" Grid.Column="0" Grid.Row="0"
                           Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <CheckBox Name="EnableFinalSawCutChBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="CutExtraLenTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
-                         Style="{StaticResource OmagCut_CheckBox_Single}" 
-                         HorizontalAlignment="Right"/>
-
-               <TextBlock Name="FinalDepthTxBl" Grid.Column="0" Grid.Row="1"
-                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="FinalDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                                      Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
+               <TextBlock Name="AngleCutExtraLenTxBl" Grid.Column="0" Grid.Row="1" 
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="AngleCutExtraLenTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0" IsLength="False"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
+               <TextBlock Name="ExtArcMinRadTxBl" Grid.Column="0" Grid.Row="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="ExtArcMinRadTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+               <TextBlock Name="IntArcMaxSideAngTxBl" Grid.Column="0" Grid.Row="3"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="IntArcMaxSideAngTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0" IsLength="False"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+               <TextBlock Name="PreCutExitTxBl" Grid.Column="0" Grid.Row="4"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <CheckBox Name="PreCutExitChBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
+                         Style="{DynamicResource OmagCut_CheckBox_Single}" 
+                         HorizontalAlignment="Right"/>
 
             </Grid>
          </GroupBox>
+
+         <!--Parametri fori: 4 Parametri-->
+         <GroupBox Name="HolesGpBx" Grid.Column="1" Grid.RowSpan="3" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="145*"/>
+                  <ColumnDefinition Width="23*"/>
+                  <ColumnDefinition Width="169*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+               </Grid.RowDefinitions>
+
+               <TextBlock Name="HolesOffsetTxBl" Grid.Column="0" Grid.Row="0"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+               <EgtWPFLib:EgtTextBox Name="HolesOffsetTxBx" Grid.Column="2" Grid.Row="0" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+               <TextBlock Name="HolesOverlapTxBl" Grid.Column="0" Grid.Row="1"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+               <EgtWPFLib:EgtTextBox Name="HolesOverlapTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+               <TextBlock Name="HolesToleranceTxBl" Grid.Column="0" Grid.Row="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+               <EgtWPFLib:EgtTextBox Name="HolesToleranceTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+               <TextBlock Name="OneHoleInCornerTxBl" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="3"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
+               <CheckBox Name="OneHoleInCornerChBx" Grid.Column="2" Grid.Row="3" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="10,0,10,0"/>
+
+            </Grid>
+         </GroupBox>
+
+         <!--Parametri rettifica tagli sottosquadra: 1 Parametro -->
+         <GroupBox Name="RectificationWJParamGpBx"  Grid.Column="1" Grid.Row="4" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" >
+            <Grid Grid.Column="3" Grid.Row="2">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="*"/>
+               </Grid.RowDefinitions>
+
+               <TextBlock Name="EnableRectificationTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+               <CheckBox Name="EnableRectificationChBx" Grid.Row="0" Grid.ColumnSpan="2" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+            </Grid>
+         </GroupBox>
+
+         <!--Parametri WaterJet: 5 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
+         <GroupBox Name="WjsParamGpBx" Grid.Column="1" Grid.RowSpan="4" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="145*"/>
+                  <ColumnDefinition Width="23*"/>
+                  <ColumnDefinition Width="169*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+               </Grid.RowDefinitions>
+
+               <TextBlock Name="WjIntCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
+               <CheckBox Name="WjIntCutsChBx" Grid.Column="2" Grid.Row="0" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="10,0,10,0"/>
+
+               <TextBlock Name="HolesDiameterWJTxBl" Grid.Column="0" Grid.Row="1"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+               <EgtWPFLib:EgtTextBox Name="HolesDiameterWJTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+               <TextBlock Name="HolesOffsetWJTxBl" Grid.Column="0" Grid.Row="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+               <EgtWPFLib:EgtTextBox Name="HolesOffsetWJTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+               <TextBlock Name="MinRadiusWJTxBl" Grid.Column="0" Grid.Row="3"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+               <EgtWPFLib:EgtTextBox Name="MinRadiusWJTxBx" Grid.Column="2" Grid.Row="3" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+               <TextBlock Name="OneHoleInCornerWJTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
+               <CheckBox Name="OneHoleInCornerWJChBx" Grid.Column="2" Grid.Row="4" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="10,0,10,0"/>
+
+            </Grid>
+         </GroupBox>
+
+         <!--Parametri Fresatura: 3 Parametri-->
+         <GroupBox Name="MillingsParamGpBx" Grid.Column="2" Grid.RowSpan="3" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="*"/>
+                  <RowDefinition Height="*"/>
+                  <RowDefinition Height="*"/>
+               </Grid.RowDefinitions>
+
+               <TextBlock Name="CornerCutsTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+               <CheckBox Name="CornerCutsChBx" Grid.Row="0" Grid.ColumnSpan="2" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+               <TextBlock Name="InternalCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
+               <CheckBox Name="InternalCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+               <TextBlock Name="ShortTxBl" Grid.Column="0" Grid.Row="2"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="ShortTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            </Grid>
+         </GroupBox>
+
       </Grid>
    </Border>
 </UserControl>

Machine/Alarms2PageUC.xaml.vb

@@ -1,30 +1,278 @@
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Public Class Alarms2PageUC
 
+   ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_CurrentMachine As CurrentMachine
+
+   ' Properties
+   Private m_bFirst As Boolean = True
 
    Private Sub Alarms2Page_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      FinalSawCutGpBx.Header = EgtMsg(91254)     ' Taglio Finale
+      ' Variabile che accorcia il riferimento alla macchina corrente
-      EnableFinalSawCutTxBl.Text = EgtMsg(91255) ' Abilita
+      m_CurrentMachine = m_MainWindow.m_CurrentMachine
-      FinalDepthTxBl.Text = EgtMsg(91256)        ' Ultimo Spessore
+
+      SawGpBx.Header = EgtMsg(90925)                                     ' Parametri lama
+      HolesGpBx.Header = EgtMsg(90917)                                   ' Parametri fori
+      MillingsParamGpBx.Header = EgtMsg(90929)                           ' Parametri fresature
+      WjsParamGpBx.Header = EgtMsg(91058)                                ' Parametri waterjet
+      WjsParamGpBx.Header = EgtMsg(91058)                                ' Parametri waterjet
+      RectificationWJParamGpBx.Header = EgtMsg(91047)                    ' Rettifica
+
+      HolesOffsetTxBl.Text = EgtMsg(90909)                               ' Offset fori
+      HolesOverlapTxBl.Text = EgtMsg(90910)                              ' Sovrapp. fori
+      HolesToleranceTxBl.Text = EgtMsg(90911)                            ' Tolleranza fori
+      OneHoleInCornerTxBl.Text = EgtMsg(90926)                           ' Un solo foro in angolo
+      CutExtraLenTxBl.Text = EgtMsg(90906)                               ' Sicurezza tagli
+      AngleCutExtraLenTxBl.Text = EgtMsg(90907)                          ' Sicur. angoli
+      ExtArcMinRadTxBl.Text = EgtMsg(90918)                              ' Rmin archi est.
+      IntArcMaxSideAngTxBl.Text = EgtMsg(90924)                          ' Amax archi int.
+      PreCutExitTxBl.Text = EgtMsg(91065)                                ' PreTaglio uscite
+      CornerCutsTxBl.Text = EgtMsg(90944)                                ' Sempre sugli angoli
+      InternalCutsTxBl.Text = EgtMsg(90930)                              ' Sempre sugli interni
+      ShortTxBl.Text = EgtMsg(90949)                                     ' Accorciamento
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      EnableRectificationTxBl.Text = EgtMsg(91048)                       ' Abilita (sottosquadra)
+      '-- INIZIO -- nuovi parametri per preforo lavello
+      WjIntCutsTxBl.Text = EgtMsg(90930)                                 ' Sempre sugli interni
+      HolesDiameterWJTxBl.Text = EgtMsg(91044)                           ' Diametro
+      HolesOffsetWJTxBl.Text = EgtMsg(91045)                             ' Offset
+      MinRadiusWJTxBl.Text = EgtMsg(91046)                               ' Raggio Minimo
+      OneHoleInCornerWJTxBl.Text = EgtMsg(90926)                         ' Un solo foro in angolo
+
    End Sub
 
    Private Sub Allarm2Page_Loaded() Handles Me.Loaded
-      EnableFinalSawCutChBx.IsChecked = m_MainWindow.m_CurrentMachine.bEnableFinalSawCut
+      If m_bFirst Then
-      FinalDepthTxBx.Text = m_MainWindow.m_CurrentMachine.dFinalDepth
+         ' in assenza dell'uscita H1 nascondo i parametri lama
+         If EgtGetHeadId("H1") = GDB_ID.NULL Then
+            SawGpBx.Visibility = Visibility.Hidden
+         End If
+
+         ' Verifico la configurazione della macchina per creare i combobox
+         Select Case m_CurrentMachine.MountedToolConfig
+            Case CurrentMachine.MountedToolConfigs.SAW
+               ' Disattivo il gruppo dei parametri fori
+               HolesGpBx.Visibility = Windows.Visibility.Hidden
+            Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
+            'Non faccio alcunchè
+            Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+               'Da implementare
+         End Select
+
+         ' Se non previste forature, disabilito relativo box
+         If Not m_CurrentMachine.bDrilling Then
+            HolesGpBx.Visibility = Visibility.Hidden
+         End If
+
+         ' Se non previste fresature, disabilito relativo box e uso fresa con incisione
+         If Not m_CurrentMachine.bMilling Then
+            MillingsParamGpBx.Visibility = Visibility.Hidden
+         End If
+
+         ' Se non previsti tagli waterjet, disabilito relativo box
+         If Not m_CurrentMachine.bWaterJetting Then
+            WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
+         End If
+
+         m_bFirst = False
+      End If
+
+      Dim dVal As Double
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_HOLES_OFFSET, 0, m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.EXTRARONDRIREG, dVal)
+      HolesOffsetTxBx.Text = LenToString(dVal, 2)
+      ' Leggo sovrapposizione fori
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_HOLES_OVERLAP, 0, m_MainWindow.GetMachIniFile())
+      HolesOverlapTxBx.Text = LenToString(dVal, 2)
+      ' Leggo tolleranza diametro fori
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_HOLES_DIAMTOLER, 0, m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.HOLEDIAMTOLER, dVal)
+      HolesToleranceTxBx.Text = LenToString(dVal, 2)
+      ' Leggo un solo foro in corner
+      OneHoleInCornerChBx.IsChecked = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ONEHOLE_INTCORNER, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Leggo sicurezza su tagli
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_CUT, 0, m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.EXTRALONCUTREG, dVal)
+      CutExtraLenTxBx.Text = LenToString(dVal, 2)
+      ' Leggo sicurezza su tagli in angoli interni
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 0, m_MainWindow.GetMachIniFile())
+      AngleCutExtraLenTxBx.Text = LenToString(dVal, 2)
+      ' Leggo raggio minimo arco esterno
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_EXTARCMINRAD, 200, m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
+      ExtArcMinRadTxBx.Text = LenToString(dVal, 2)
+      ' Leggo angolo di fianco massimo arco interno
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_INTARCMAXSIDEANG, 45, m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
+      IntArcMaxSideAngTxBx.Text = DoubleToString(dVal, 2)
+      ' Leggo se PreCutExit attivo (per taglio ceramico)
+      Dim nPreCutExit As Integer = GetPrivateProfileInt(S_MACH_NEST, K_MACH_PRECUTEXIT, -1, m_MainWindow.GetMachIniFile())
+      If nPreCutExit = -1 Then
+         PreCutExitTxBl.Visibility = Visibility.Hidden
+         PreCutExitChBx.Visibility = Visibility.Hidden
+      Else
+         PreCutExitChBx.IsChecked = (nPreCutExit <> 0)
+      End If
+      ' Salvo DB lavorazioni con aggiornamenti parametri generali
+      EgtMdbSave()
+      ' Leggo lavorazione angoli con fresa
+      CornerCutsChBx.IsChecked = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Leggo lavorazione interni con fresa
+      InternalCutsChBx.IsChecked = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Leggo accorciamento angoli con fresa
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
+      ShortTxBx.Text = LenToString(dVal, 2)
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      WjIntCutsChBx.IsChecked = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Lavorazione preforo lavello con WaterJet
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_DIAMITERWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesDiameterWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_OFFSETWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesOffsetWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MIN_RADIUSWJ, 0, m_MainWindow.GetMachIniFile())
+      MinRadiusWJTxBx.Text = LenToString(dVal, 2)
+      OneHoleInCornerWJChBx.IsChecked = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
    End Sub
 
-   Private Sub EnableFinalSawCutChBx_IsChecked() Handles EnableFinalSawCutChBx.Click
+   Private Sub CutExtraLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles CutExtraLenTxBx.EgtClosed
-      m_MainWindow.m_CurrentMachine.bEnableFinalSawCut = EnableFinalSawCutChBx.IsChecked
-      WritePrivateProfileString(S_MACH, K_ENABLEFINALSAWCUT, If(m_MainWindow.m_CurrentMachine.bEnableFinalSawCut, "1", "0"), m_MainWindow.GetMachIniFile())
-   End Sub
-
-   Private Sub FinalDepthTxBx_EgtClosed() Handles FinalDepthTxBx.EgtClosed
       Dim dVal As Double = 0
-      StringToLen(FinalDepthTxBx.Text, dVal)
+      StringToLen(CutExtraLenTxBx.Text, dVal)
-      m_MainWindow.m_CurrentMachine.dFinalDepth = dVal
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_SAFE_LEN_CUT, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-      WritePrivateProfileString(S_MACH, K_FINALDEPTH, DoubleToString(m_MainWindow.m_CurrentMachine.dFinalDepth, 3), m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.EXTRALONCUTREG, dVal)
+      EgtMdbSave()
    End Sub
 
+   Private Sub AngleCutExtraLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles AngleCutExtraLenTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(AngleCutExtraLenTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub ExtArcMinRadTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ExtArcMinRadTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(ExtArcMinRadTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_EXTARCMINRAD, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
+      EgtMdbSave()
+   End Sub
+
+   Private Sub IntArcMaxSideAngTxBx_EgtClosed(sender As Object, e As EventArgs) Handles IntArcMaxSideAngTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToDouble(IntArcMaxSideAngTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_INTARCMAXSIDEANG, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
+      EgtMdbSave()
+   End Sub
+
+   Private Sub PreCutExitChBx_Click(sender As Object, e As RoutedEventArgs) Handles PreCutExitChBx.Click
+      If PreCutExitChBx.IsChecked Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_PRECUTEXIT, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_PRECUTEXIT, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
+   Private Sub HolesOffsetTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HolesOffsetTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesOffsetTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_HOLES_OFFSET, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.EXTRARONDRIREG, dVal)
+      EgtMdbSave()
+   End Sub
+
+   Private Sub HolesOverlapTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HolesOverlapTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesOverlapTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_HOLES_OVERLAP, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub HolesToleranceTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HolesToleranceTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesToleranceTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_HOLES_DIAMTOLER, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+      EgtMdbSetGeneralParam(MCH_GP.HOLEDIAMTOLER, dVal)
+      EgtMdbSave()
+   End Sub
+
+   Private Sub OneHoleInCornerChBx_Click(sender As Object, e As RoutedEventArgs) Handles OneHoleInCornerChBx.Click
+      If OneHoleInCornerChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_ONEHOLE_INTCORNER, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_ONEHOLE_INTCORNER, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
+   Private Sub CornerCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles CornerCutsChBx.Click
+      If CornerCutsChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
+   Private Sub ShortTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ShortTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(ShortTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_SHORTENING, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub InternalCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles InternalCutsChBx.Click
+      If InternalCutsChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
+   Private Sub WjIntCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles WjIntCutsChBx.Click
+      If WjIntCutsChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
+   ' -- INIZIO -- nuovi parametri per prefori WaterJet
+   Private Sub HolesDiameterWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesDiameterWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesDiameterWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_DIAMITERWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub HolesOffsetWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesOffsetWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesOffsetWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_OFFSETWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub MinRadiusWJTxBx_Click(sender As Object, e As EventArgs) Handles MinRadiusWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(MinRadiusWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MIN_RADIUSWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub OneHoleInCornerWJChBx_Click(sender As Object, e As EventArgs) Handles OneHoleInCornerWJChBx.Click
+      If OneHoleInCornerWJChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per prefori WaterJet
+
 End Class

Machine/AlarmsPageUC.xaml

@@ -20,7 +20,6 @@
          <Grid.RowDefinitions>
             <RowDefinition Height="2*"/>
             <RowDefinition Height="0.5*"/>
-
             <RowDefinition Height="1.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="1*"/>
@@ -30,254 +29,7 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         <!--Costruisco le riche per la colonna 3-->
+         <Grid Grid.RowSpan="3" Margin="6,0,6,0">
-         <Grid Grid.Column="2" Grid.RowSpan="9">
-            <Grid.RowDefinitions>
-               <!--GruopBox: taglio lama-->
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <!--GruopBoxs: Fresatura/>Foratura/WaterJet-->
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <!--GroupBox: vai ad Home-->
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.375*"/>
-            </Grid.RowDefinitions>
-
-            <!--Parametri Taglio Lama: 5 Parametri-->
-            <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="4">
-               <!--definizione della grigli ainterna-->
-               <Grid>
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="2*"/>
-                  </Grid.ColumnDefinitions>
-                  <Grid.RowDefinitions>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                     <RowDefinition Height="0.5*"/>
-                  </Grid.RowDefinitions>
-
-                  <TextBlock Name="CutExtraLenTxBl" Grid.Column="0" Grid.Row="0"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="CutExtraLenTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
-                                        Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                  <TextBlock Name="AngleCutExtraLenTxBl" Grid.Column="0" Grid.Row="1" 
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="AngleCutExtraLenTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0" IsLength="False"
-                                        Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                  <TextBlock Name="ExtArcMinRadTxBl" Grid.Column="0" Grid.Row="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ExtArcMinRadTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
-                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-
-                  <TextBlock Name="IntArcMaxSideAngTxBl" Grid.Column="0" Grid.Row="3"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="IntArcMaxSideAngTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0" IsLength="False"
-                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-
-                  <TextBlock Name="PreCutExitTxBl" Grid.Column="0" Grid.Row="4"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <CheckBox Name="PreCutExitChBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
-                            Style="{DynamicResource OmagCut_CheckBox_Single}" 
-                            HorizontalAlignment="Right"/>
-
-               </Grid>
-
-            </GroupBox>
-
-            <Grid Grid.Column="2" Grid.Row="4" Grid.RowSpan="8">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition />
-                  <ColumnDefinition />
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="*"/>
-                  <RowDefinition Height="*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="*"/>
-                  <RowDefinition Height="*"/>
-               </Grid.RowDefinitions>
-
-               <!--Parametri fori: 4 Parametri-->
-               <GroupBox Name="HolesGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="3" 
-                         Style="{DynamicResource OmagCut_GroupBox}">
-
-                  <Grid>
-                     <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="145*"/>
-                        <ColumnDefinition Width="23*"/>
-                        <ColumnDefinition Width="169*"/>
-                     </Grid.ColumnDefinitions>
-                     <Grid.RowDefinitions>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                     </Grid.RowDefinitions>
-
-                     <TextBlock Name="HolesOffsetTxBl" Grid.Column="0" Grid.Row="0"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                     <EgtWPFLib:EgtTextBox Name="HolesOffsetTxBx" Grid.Column="2" Grid.Row="0" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                     <TextBlock Name="HolesOverlapTxBl" Grid.Column="0" Grid.Row="1"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                     <EgtWPFLib:EgtTextBox Name="HolesOverlapTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                     <TextBlock Name="HolesToleranceTxBl" Grid.Column="0" Grid.Row="2"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                     <EgtWPFLib:EgtTextBox Name="HolesToleranceTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                     <TextBlock Name="OneHoleInCornerTxBl" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="3"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
-                     <CheckBox Name="OneHoleInCornerChBx" Grid.Column="2" Grid.Row="3" 
-                               Style="{DynamicResource OmagCut_CheckBox_Single}"
-                               HorizontalAlignment="Right" Margin="10,0,10,0"/>
-
-                  </Grid>
-
-               </GroupBox>
-
-               <!--Parametri Fresatura: 3 Parametri-->
-               <GroupBox Name="MillingsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="2" Grid.RowSpan="2">
-                  <Grid Grid.Column="3" Grid.Row="2">
-                     <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                     </Grid.ColumnDefinitions>
-                     <Grid.RowDefinitions>
-                        <RowDefinition Height="*"/>
-                        <RowDefinition Height="*"/>
-                        <RowDefinition Height="*"/>
-                     </Grid.RowDefinitions>
-
-                     <TextBlock Name="CornerCutsTxBl" Grid.Row="0" Grid.ColumnSpan="2"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                     <CheckBox Name="CornerCutsChBx" Grid.Row="0" Grid.ColumnSpan="2" 
-                               Style="{DynamicResource OmagCut_CheckBox_Single}"
-                               HorizontalAlignment="Right" Margin="0,0,10,0"/>
-
-                     <TextBlock Name="InternalCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
-                     <CheckBox Name="InternalCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" 
-                               Style="{DynamicResource OmagCut_CheckBox_Single}"
-                               HorizontalAlignment="Right" Margin="0,0,10,0"/>
-
-                     <TextBlock Name="ShortTxBl" Grid.Column="0" Grid.Row="2"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                     <EgtWPFLib:EgtTextBox Name="ShortTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-
-                  </Grid>
-
-               </GroupBox>
-
-               <!--Parametri rettifica tagli sottosquadra: 1 Parametro -->
-               <GroupBox Name="RectificationWJParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="2" >
-                  <Grid Grid.Column="3" Grid.Row="2">
-                     <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                     </Grid.ColumnDefinitions>
-                     <Grid.RowDefinitions>
-                        <RowDefinition Height="*"/>
-                     </Grid.RowDefinitions>
-
-                     <TextBlock Name="EnableRectificationTxBl" Grid.Row="0" Grid.ColumnSpan="2"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                     <CheckBox Name="EnableRectificationChBx" Grid.Row="0" Grid.ColumnSpan="2" 
-                               Style="{DynamicResource OmagCut_CheckBox_Single}"
-                               HorizontalAlignment="Right" Margin="0,0,10,0"/>
-
-                     <!--<TextBlock Name="OffsetRectificationTxBl" Grid.Row="1" Grid.Column="0" 
-                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                       <EgtWPFLib:EgtTextBox Name="OffsetRectificationTxBx" Grid.Row="1" Grid.Column="1" Margin="10,0,10,0"
-                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>-->
-
-                  </Grid>
-
-               </GroupBox>
-
-               <!--Parametri WaterJet: 5 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
-               <GroupBox Name="WjsParamGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="4" 
-                         Style="{DynamicResource OmagCut_GroupBox}">
-                  <Grid Grid.Column="3" Grid.Row="2">
-                     <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="145*"/>
-                        <ColumnDefinition Width="23*"/>
-                        <ColumnDefinition Width="169*"/>
-                     </Grid.ColumnDefinitions>
-                     <Grid.RowDefinitions>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="0.5*"/>
-                     </Grid.RowDefinitions>
-
-                     <TextBlock Name="WjIntCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
-                     <CheckBox Name="WjIntCutsChBx" Grid.Column="2" Grid.Row="0" 
-                               Style="{DynamicResource OmagCut_CheckBox_Single}"
-                               HorizontalAlignment="Right" Margin="10,0,10,0"/>
-
-                     <TextBlock Name="HolesDiameterWJTxBl" Grid.Column="0" Grid.Row="1"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                     <EgtWPFLib:EgtTextBox Name="HolesDiameterWJTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                     <TextBlock Name="HolesOffsetWJTxBl" Grid.Column="0" Grid.Row="2"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                     <EgtWPFLib:EgtTextBox Name="HolesOffsetWJTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                     <TextBlock Name="MinRadiusWJTxBl" Grid.Column="0" Grid.Row="3"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                     <EgtWPFLib:EgtTextBox Name="MinRadiusWJTxBx" Grid.Column="2" Grid.Row="3" Margin="10,0,10,0"
-                                           Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                     <TextBlock Name="OneHoleInCornerWJTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
-                                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
-                     <CheckBox Name="OneHoleInCornerWJChBx" Grid.Column="2" Grid.Row="4" 
-                               Style="{DynamicResource OmagCut_CheckBox_Single}"
-                               HorizontalAlignment="Right" Margin="10,0,10,0"/>
-
-
-                  </Grid>
-               </GroupBox>
-
-            </Grid>
-
-            <!--Parametri Taglio diretto: 1 Parametro-->
-            <GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="12" Grid.RowSpan="2">
-               <Grid>
-                  <TextBlock Name="FinalHomeTxBl"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                  <CheckBox Name="FinalHomeChBx"
-                            Style="{DynamicResource OmagCut_CheckBox_Single}"
-                            HorizontalAlignment="Right" Margin="0,0,10,0"/>
-               </Grid>
-
-            </GroupBox>
-
-         </Grid>
-
-         <Grid Grid.RowSpan="3">
             <Grid.RowDefinitions>
                <RowDefinition Height="1.75*"/>
                <RowDefinition Height="0.5*"/>
@@ -492,7 +244,7 @@
 
          </Grid>-->
 
-         <GroupBox Name="MaterialsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+         <GroupBox Name="MaterialsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Margin="5,0,5,0"
                    Grid.Row="3" Grid.ColumnSpan="1" Grid.RowSpan="5">
 
             <Grid>
@@ -524,7 +276,7 @@
 
          </GroupBox>
 
-         <GroupBox Name="MachiningsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1"
+         <GroupBox Name="MachiningsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Margin="0,0,5,0"
                    Grid.Row="0" Grid.ColumnSpan="1" Grid.RowSpan="3">
 
             <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
@@ -639,7 +391,7 @@
 
          </GroupBox>-->
 
-         <Grid Grid.Column="1" Grid.Row="3" Grid.RowSpan="3">
+         <Grid Grid.Column="1" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,5,0" >
             <Grid.ColumnDefinitions>
                <ColumnDefinition />
                <ColumnDefinition />
@@ -651,36 +403,29 @@
                <RowDefinition Height="*"/>
             </Grid.RowDefinitions>
 
-            <GroupBox Name="MachineParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="2">
+            <GroupBox Name="MachineParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="4">
-               <Grid Grid.Column="2" Grid.Row="1">
+               <Grid>
                   <Grid.ColumnDefinitions>
                      <ColumnDefinition Width="2*"/>
                      <ColumnDefinition Width="2*"/>
                   </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="2*"/>
+                     <RowDefinition Height="2*"/>
+                  </Grid.RowDefinitions>
 
                   <TextBlock Name="SafeZTxBl" Grid.Column="0"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="SafeZTxBx" Grid.Column="1" Margin="10,0,10,0"
                                         Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </Grid>
 
-            </GroupBox>
+                  <TextBlock Name="AdditionalTableTxBl" Grid.Row="1"
-
-            <Border Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="0" Grid.Row="2" Grid.ColumnSpan="2" Grid.RowSpan="2">
-               <Grid >
-                  <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="2*"/>
-                  </Grid.ColumnDefinitions>
-
-                  <TextBlock Name="AdditionalTableTxBl" Grid.Column="0"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                  <EgtWPFLib:EgtTextBox Name="AdditionalTableTxBx" Grid.Column="1" Margin="10,0,10,0"
+                  <EgtWPFLib:EgtTextBox Name="AdditionalTableTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                                         Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
                </Grid>
 
-            </Border>
+            </GroupBox>
-
          </Grid>
 
          <!--<GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="8">
@@ -693,7 +438,8 @@
 
          </GroupBox>-->
 
-         <GroupBox Name="NestingParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3">
+         <GroupBox Name="NestingParamGpBx" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3">
             <Grid Name="NestingGrid">
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -736,7 +482,8 @@
 
          </GroupBox>
 
-         <GroupBox Name="AutoRawImageParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="0" Grid.RowSpan="2">
+         <GroupBox Name="AutoRawImageParamGpBx" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="0" Grid.RowSpan="2">
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -773,8 +520,9 @@
 
          </GroupBox>
 
-         <GroupBox Name="CutFredGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
+         <GroupBox Name="CutFredGpBx" Margin="0,0,5,0"
-                   Grid.Row="2" Grid.RowSpan="1">
+                   Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2"
+                   Grid.Row="0" Grid.RowSpan="1">
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -798,8 +546,8 @@
          </GroupBox>
 
          <!--Incisioni-->
-         <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
+         <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Margin="0,0,5,0"
-                   Grid.Row="3" Grid.RowSpan="3">
+                   Grid.Row="1" Grid.RowSpan="3">
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -831,8 +579,36 @@
 
          </GroupBox>
 
+         <GroupBox Name="FinalSawCutGpBx" Grid.Column="2" Grid.Row="4" Grid.RowSpan="2" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="0.5*"/>
+               </Grid.RowDefinitions>
 
-         <Border  Name="SideAngCutProbeGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="6">
+               <TextBlock Name="EnableFinalSawCutTxBl" Grid.Column="0" Grid.Row="0"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <CheckBox Name="EnableFinalSawCutChBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+                         Style="{StaticResource OmagCut_CheckBox_Single}" 
+                         HorizontalAlignment="Right"/>
+
+               <TextBlock Name="FinalDepthTxBl" Grid.Column="0" Grid.Row="1"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="FinalDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+
+
+            </Grid>
+         </GroupBox>
+
+         <GroupBox Name="SideAngCutProbeGpBx" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="2">
             <Grid >
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -846,9 +622,11 @@
                          HorizontalAlignment="Right" Margin="0,0,10,0"/>
             </Grid>
 
-         </Border>
+         </GroupBox>
 
-         <Border Name="WashingGpBx" Style="{DynamicResource OmagCut_NoNameGroupBorder}" Grid.Column="3" Grid.Row="7">
+         <GroupBox Name="WashingGpBx" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" 
+                   Grid.Column="3" Grid.Row="3" Grid.RowSpan="2">
             <Grid >
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -862,10 +640,11 @@
                          HorizontalAlignment="Right" Margin="0,0,10,0"/>
             </Grid>
 
-         </Border>
+         </GroupBox>
 
          <!--Cornici-->
-         <GroupBox Name="FrameGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="8">
+         <GroupBox Name="FrameGpBx" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="5" Grid.RowSpan="2">
             <Grid >
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -881,7 +660,20 @@
 
          </GroupBox>
 
-         <Grid Grid.Column="0" Grid.Row="8">
+         <!--Parametri Taglio diretto: 1 Parametro-->
+         <GroupBox Name="DirectCutsParamGpBx" Margin="0,0,5,0"
+                   Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="7">
+            <Grid>
+               <TextBlock Name="FinalHomeTxBl"
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+               <CheckBox Name="FinalHomeChBx"
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,10,0"/>
+            </Grid>
+
+         </GroupBox>
+
+         <Grid Grid.Column="0" Grid.Row="8" Margin="0,0,5,0">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="2.5*"/>
                <ColumnDefinition Width="2.5*"/>

Machine/AlarmsPageUC.xaml.vb

@@ -62,45 +62,19 @@ Public Class AlarmsPageUC
       CurrCupWheelTxBl.Text = EgtMsg(91070)                              ' Scasso corrente
       CurrMillTxBl.Text = EgtMsg(90904)                                  ' Fresa corrente
       CurrWJetTxBl.Text = EgtMsg(90900)                                  ' Waterjet corrente
-      HolesOffsetTxBl.Text = EgtMsg(90909)                               ' Offset fori
-      HolesOverlapTxBl.Text = EgtMsg(90910)                              ' Sovrapp. fori
-      HolesToleranceTxBl.Text = EgtMsg(90911)                            ' Tolleranza fori
-      OneHoleInCornerTxBl.Text = EgtMsg(90926)                           ' Un solo foro in angolo
-      CutExtraLenTxBl.Text = EgtMsg(90906)                               ' Sicurezza tagli
-      AngleCutExtraLenTxBl.Text = EgtMsg(90907)                          ' Sicur. angoli
       CompleteCutsTxBl.Text = EgtMsg(90908)                              ' Rispetta i tagli completi
       SafeZTxBl.Text = EgtMsg(90905)                                     ' Z Sicura
       MaterialsGpBx.Header = EgtMsg(90913)                               ' Materiali
       NewMatBtn.Content = EgtMsg(90914)                                  ' Aggiungi
       RemoveMatBtn.Content = EgtMsg(90915)                               ' Rimuovi
       SetUpGpBx.Header = EgtMsg(90916)                                   ' Utensili correnti
-      HolesGpBx.Header = EgtMsg(90917)                                   ' Parametri fori
-      ExtArcMinRadTxBl.Text = EgtMsg(90918)                              ' Rmin archi est.
-      IntArcMaxSideAngTxBl.Text = EgtMsg(90924)                          ' Amax archi int.
-      PreCutExitTxBl.Text = EgtMsg(91065)                                ' PreTaglio uscite
       MachineParamGpBx.Header = EgtMsg(90919)                            ' Parametri macchina
-      SawGpBx.Header = EgtMsg(90925)                                     ' Parametri lama
       DirectCutsParamGpBx.Header = EgtMsg(90927)                         ' Tagli diretti
       FinalHomeTxBl.Text = EgtMsg(90928)                                 ' Home finale
-      MillingsParamGpBx.Header = EgtMsg(90929)                           ' Parametri fresature
+      TopMillGpBx.Header = EgtMsg(91061)                                ' Parametri incisioni
-      CornerCutsTxBl.Text = EgtMsg(90944)                                ' Sempre sugli angoli
-      InternalCutsTxBl.Text = EgtMsg(90930)                              ' Sempre sugli interni
-      ShortTxBl.Text = EgtMsg(90949)                                     ' Accorciamento
-      TopMillGpBx.Header = EgtMsg( 91061)                                ' Parametri incisioni
       TmEnableTxBl.Text = EgtMsg( 91062)                                 ' Con fresa
       TmDepthTxBl.Text = EgtMsg( 91063)                                  ' Profondità
       TmWidthTxBl.Text = EgtMsg( 91064)                                  ' Larghezza
-      WJsParamGpBx.Header = EgtMsg( 91058)                               ' Parametri waterjet
-      WjIntCutsTxBl.Text = EgtMsg(90930)                                 ' Sempre sugli interni
-      '-- INIZIO -- nuovi parametri per preforo lavello
-      HolesDiameterWJTxBl.Text = EgtMsg(91044)                           ' Diametro
-      HolesOffsetWJTxBl.Text = EgtMsg(91045)                             ' Offset
-      MinRadiusWJTxBl.Text = EgtMsg(91046)                               ' Raggio Minimo
-      OneHoleInCornerWJTxBl.Text = EgtMsg(90926)                         ' Un solo foro in angolo
-      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
-      RectificationWJParamGpBx.Header = EgtMsg(91047)                    ' Rettifica
-      EnableRectificationTxBl.Text = EgtMsg(91048)                       ' Abilita (sottosquadra)
-      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(90931)                            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -113,8 +87,6 @@ Public Class AlarmsPageUC
       BackImageBtn.Content = EgtMsg(90938)                               ' Sfondo
       ThresholdTxBl.Text = EgtMsg(90939)                                 ' Soglia
       ToleranceTxBl.Text = EgtMsg(90940)                                 ' Tolleranza
-      WashingTxBl.Text = EgtMsg(90941)                                   ' Lavaggio
-      SideAngCutProbeTxBl.Text = EgtMsg(90950)                           ' Tastatura tagli inclinati
       CutFredGpBx.Header = EgtMsg(90946)                                 ' Tagli Feed inizio/fine
       CfrLenTxBl.Text = EgtMsg(90947)                                    ' Lunghezza
       CfrPercTxBl.Text = EgtMsg(90948)                                   ' Riduzione %
@@ -130,16 +102,20 @@ Public Class AlarmsPageUC
       FrameGpBx.Header = EgtMsg(91068)                                   ' Cornici
       FramePauseTxBl.Text = EgtMsg(91067)                                ' Inserisci pausa
       UseLaserOriginTxBl.Text = EgtMsg(91129)                            ' Usa laser per origine
+      SideAngCutProbeGpBx.Header = EgtMsg(90950)                         ' Tastatura
+      SideAngCutProbeTxBl.Text = EgtMsg(90950)                           ' Tastatura tagli inclinati
+      WashingGpBx.Header = EgtMsg(90941)                                 ' Lavaggio
+      WashingTxBl.Text = EgtMsg(90941)                                   ' Lavaggio
+      FinalSawCutGpBx.Header = EgtMsg(91254)                             ' Taglio Finale
+      EnableFinalSawCutTxBl.Text = EgtMsg(91255)                         ' Abilita
+      FinalDepthTxBl.Text = EgtMsg(91256)                                ' Ultimo Spessore
       AutoRawImageParamGpBx.Visibility = Windows.Visibility.Hidden
    End Sub
 
    Private Sub AlarmsPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
-
       If m_bFirst Then
-
          ' in assenza dell'uscita H1 nascondo i parametri lama
          If EgtGetHeadId("H1") = GDB_ID.NULL Then
-            SawGpBx.Visibility = Visibility.Hidden
             TopMillGpBx.Visibility = Visibility.Hidden
             CurrSawTxBl.Visibility = Visibility.Hidden
             CurrSawCmBx.Visibility = Visibility.Hidden
@@ -157,31 +133,18 @@ Public Class AlarmsPageUC
                CurrToolsGrid.RowDefinitions.Add(EndRow)
                SetUpGpBx.SetValue(Grid.RowSpanProperty, 1)
                ' Disattivo il gruppo dei parametri fori
-               HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
             'Non faccio alcunchè
             Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
                'Da implementare
          End Select
 
-         ' Se non previste forature, disabilito relativo box
-         If Not m_CurrentMachine.bDrilling Then
-            HolesGpBx.Visibility = Visibility.Hidden
-         End If
-
          ' Se non previste fresature, disabilito relativo box e uso fresa con incisione
          If Not m_CurrentMachine.bMilling Then
-            MillingsParamGpBx.Visibility = Visibility.Hidden
             TmEnableChBx.IsEnabled = False
             TmEnableChBx.IsChecked = False
          End If
 
-         ' Se non previsti tagli waterjet, disabilito relativo box
-         If Not m_CurrentMachine.bWaterJetting Then
-            WjsParamGpBx.Visibility = Visibility.Hidden
-            RectificationWJParamGpBx.Visibility = Visibility.Hidden
-         End If
-
          ' Abilitazione box per contorni grezzo da foto
          If m_MainWindow.m_Camera.GetCalcContour() Then
             AutoRawImageParamGpBx.Visibility = Windows.Visibility.Visible
@@ -353,71 +316,12 @@ Public Class AlarmsPageUC
 
       ' Leggo offset fori
       Dim dVal As Double
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_HOLES_OFFSET, 0, m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.EXTRARONDRIREG, dVal)
-      HolesOffsetTxBx.Text = LenToString(dVal, 2)
-      ' Leggo sovrapposizione fori
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_HOLES_OVERLAP, 0, m_MainWindow.GetMachIniFile())
-      HolesOverlapTxBx.Text = LenToString(dVal, 2)
-      ' Leggo tolleranza diametro fori
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_HOLES_DIAMTOLER, 0, m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.HOLEDIAMTOLER, dVal)
-      HolesToleranceTxBx.Text = LenToString(dVal, 2)
-      ' Leggo un solo foro in corner
-      OneHoleInCornerChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ONEHOLE_INTCORNER, 0, m_MainWindow.GetMachIniFile()) <> 0)
-      ' Leggo sicurezza su tagli
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_CUT, 0, m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.EXTRALONCUTREG, dVal)
-      CutExtraLenTxBx.Text = LenToString(dVal, 2)
-      ' Leggo sicurezza su tagli in angoli interni
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 0, m_MainWindow.GetMachIniFile())
-      AngleCutExtraLenTxBx.Text = LenToString(dVal, 2)
       ' Leggo distanza di sicurezza
       dVal = 0
       EgtMdbGetGeneralParam(MCH_GP.SAFEZ, dVal)
       SafeZTxBx.Text = LenToString(dVal, 2)
-      ' Leggo raggio minimo arco esterno
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_EXTARCMINRAD, 200, m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
-      ExtArcMinRadTxBx.Text = LenToString(dVal, 2)
-      ' Leggo se PreCutExit attivo (per taglio ceramico)
-      Dim nPreCutExit As Integer = GetPrivateProfileInt(S_MACH_NEST, K_MACH_PRECUTEXIT, -1, m_MainWindow.GetMachIniFile())
-      If nPreCutExit = -1 Then
-         PreCutExitTxBl.Visibility = Visibility.Hidden
-         PreCutExitChBx.Visibility = Visibility.Hidden
-      Else
-         PreCutExitChBx.IsChecked = ( nPreCutExit <> 0)
-      End If
-      ' Leggo angolo di fianco massimo arco interno
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_INTARCMAXSIDEANG, 45, m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
-      IntArcMaxSideAngTxBx.Text = DoubleToString(dVal, 2)
       ' Salvo DB lavorazioni con aggiornamenti parametri generali
       EgtMdbSave()
-      ' Leggo lavorazione angoli con fresa
-      CornerCutsChBx.IsChecked =
-         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
-      ' Leggo lavorazione interni con fresa
-      InternalCutsChBx.IsChecked =
-         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
-      WjIntCutsChBx.IsChecked =
-         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
-      ' Lavorazione preforo lavello con WaterJet
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_DIAMITERWJ, 0, m_MainWindow.GetMachIniFile())
-      HolesDiameterWJTxBx.Text = LenToString(dVal, 2)
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_OFFSETWJ, 0, m_MainWindow.GetMachIniFile())
-      HolesOffsetWJTxBx.Text = LenToString(dVal, 2)
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MIN_RADIUSWJ, 0, m_MainWindow.GetMachIniFile())
-      MinRadiusWJTxBx.Text = LenToString(dVal, 2)
-      OneHoleInCornerWJChBx.IsChecked =
-         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
-      ' leggo se attiva la rettifica degli angoli per WaterJet
-      EnableRectificationChBx.IsChecked =
-         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
-      ' Leggo accorciamento angoli con fresa
-      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
-      ShortTxBx.Text = LenToString(dVal, 2)
       ' Leggo flag abilitazione incisioni con fresa
       TmEnableChBx.IsChecked =
              (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
@@ -483,6 +387,8 @@ Public Class AlarmsPageUC
          UseLaserOriginChBx.IsChecked = (nUseLaserOrigin <> 0)
       End If
 
+      EnableFinalSawCutChBx.IsChecked = m_MainWindow.m_CurrentMachine.bEnableFinalSawCut
+      FinalDepthTxBx.Text = m_MainWindow.m_CurrentMachine.dFinalDepth
    End Sub
 
    ' aggiorna le text delle lavorazioni (la selezione avviene nella pagina del grezzo o dalla pagina del progetto corrente)
@@ -708,6 +614,24 @@ Public Class AlarmsPageUC
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
       ' aggiorno la lista delle lavorazioni
       RefreschMachining()
+
+      ' Se è associata anche una lavorazione inclinata allora deve essere resettata
+      If m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+         m_CurrentMachine.sCurrSawTilted = CurrSawCmBx.SelectedItem.ToString()
+         ' Se nuova lama incompatibile con lavorazione di taglio corrente, resetto quest'ultima
+         sMchTuuid = String.Empty
+         sMchTool = String.Empty
+         If Not EgtMdbSetCurrMachining(m_CurrentMachine.sCurrSawingTilted) Or
+            Not EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sMchTuuid) Or
+            Not EgtTdbGetToolFromUUID(sMchTuuid, sMchTool) Or
+            String.Compare(sMchTool, m_CurrentMachine.sCurrSawTilted, True) <> 0 Then
+            m_CurrentMachine.sCurrSawingTilted = String.Empty
+         End If
+         ' Aggiorno utensili per lavoro in corso
+         m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+         ' aggiorno la lista delle lavorazioni
+         RefreschMachining()
+      End If
    End Sub
 
    ' -- SAW TILTED --
@@ -925,50 +849,6 @@ Public Class AlarmsPageUC
       m_MainWindow.m_MachinePageUC.MachinePageGrid.Children.Add(m_SetUpPage)
    End Sub
 
-   Private Sub HolesOffsetTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HolesOffsetTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(HolesOffsetTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_HOLES_OFFSET, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.EXTRARONDRIREG, dVal)
-      EgtMdbSave()
-   End Sub
-
-   Private Sub HolesOverlapTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HolesOverlapTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(HolesOverlapTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_HOLES_OVERLAP, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-   End Sub
-
-   Private Sub HolesToleranceTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HolesToleranceTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(HolesToleranceTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_HOLES_DIAMTOLER, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.HOLEDIAMTOLER, dVal)
-      EgtMdbSave()
-   End Sub
-
-   Private Sub OneHoleInCornerChBx_Click(sender As Object, e As RoutedEventArgs) Handles OneHoleInCornerChBx.Click
-      If OneHoleInCornerChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_ONEHOLE_INTCORNER, "1", m_MainWindow.GetMachIniFile())
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_ONEHOLE_INTCORNER, "0", m_MainWindow.GetMachIniFile())
-      End If
-   End Sub
-
-   Private Sub CutExtraLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles CutExtraLenTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(CutExtraLenTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_SAFE_LEN_CUT, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.EXTRALONCUTREG, dVal)
-      EgtMdbSave()
-   End Sub
-
-   Private Sub AngleCutExtraLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles AngleCutExtraLenTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(AngleCutExtraLenTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-   End Sub
-
    Private Sub SafeZTxBx_EgtClosed(sender As Object, e As EventArgs) Handles SafeZTxBx.EgtClosed
       Dim dSafeZ As Double = 0
       StringToLen(SafeZTxBx.Text, dSafeZ)
@@ -976,30 +856,6 @@ Public Class AlarmsPageUC
       EgtMdbSave()
    End Sub
 
-   Private Sub ExtArcMinRadTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ExtArcMinRadTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(ExtArcMinRadTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_EXTARCMINRAD, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.EXTSAWARCMINRAD, dVal)
-      EgtMdbSave()
-   End Sub
-
-   Private Sub IntArcMaxSideAngTxBx_EgtClosed(sender As Object, e As EventArgs) Handles IntArcMaxSideAngTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToDouble(IntArcMaxSideAngTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_INTARCMAXSIDEANG, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-      EgtMdbSetGeneralParam(MCH_GP.INTSAWARCMAXSIDEANG, dVal)
-      EgtMdbSave()
-   End Sub
-
-   Private Sub PreCutExitChBx_Click(sender As Object, e As RoutedEventArgs) Handles PreCutExitChBx.Click
-      If PreCutExitChBx.IsChecked Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_PRECUTEXIT, "1", m_MainWindow.GetMachIniFile())
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_PRECUTEXIT, "0", m_MainWindow.GetMachIniFile())
-      End If
-   End Sub
-
    Private Sub CompleteCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles CompleteCutsChBx.Click
       Dim NestPage As NestPageUC = m_MainWindow.m_CadCutPageUC.m_NestPage
       If CompleteCutsChBx.IsChecked() Then
@@ -1025,74 +881,6 @@ Public Class AlarmsPageUC
       AdjustGhigliottinaTextOnAutomaticOrCompleteCuts()
    End Sub
 
-   Private Sub CornerCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles CornerCutsChBx.Click
-      If CornerCutsChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
-      End If
-   End Sub
-
-   Private Sub ShortTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ShortTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(ShortTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_SHORTENING, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-   End Sub
-
-   Private Sub InternalCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles InternalCutsChBx.Click
-      If InternalCutsChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "1", m_MainWindow.GetMachIniFile())
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "0", m_MainWindow.GetMachIniFile())
-      End If
-   End Sub
-
-   Private Sub WjIntCutsChBx_Click(sender As Object, e As RoutedEventArgs) Handles WjIntCutsChBx.Click
-      If WjIntCutsChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "1", m_MainWindow.GetMachIniFile())
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, "0", m_MainWindow.GetMachIniFile())
-      End If
-   End Sub
-
-   ' -- INIZIO -- nuovi parametri per prefori WaterJet
-   Private Sub HolesDiameterWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesDiameterWJTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(HolesDiameterWJTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_HOLES_DIAMITERWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-   End Sub
-
-   Private Sub HolesOffsetWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesOffsetWJTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(HolesOffsetWJTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_HOLES_OFFSETWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-   End Sub
-
-   Private Sub MinRadiusWJTxBx_Click(sender As Object, e As EventArgs) Handles MinRadiusWJTxBx.EgtClosed
-      Dim dVal As Double = 0
-      StringToLen(MinRadiusWJTxBx.Text, dVal)
-      WritePrivateProfileString(S_MACH_NEST, K_MIN_RADIUSWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
-   End Sub
-
-   Private Sub OneHoleInCornerWJChBx_Click(sender As Object, e As EventArgs) Handles OneHoleInCornerWJChBx.Click
-      If OneHoleInCornerWJChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
-      End If
-   End Sub
-   ' --   FINE   -- nuovi parametri per prefori WaterJet
-
-   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
-   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
-      If EnableRectificationChBx.IsChecked() Then
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
-      Else
-         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
-      End If
-   End Sub
-   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
-
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
@@ -1557,4 +1345,16 @@ Public Class AlarmsPageUC
       Return String.Empty
    End Function
 
+   Private Sub EnableFinalSawCutChBx_IsChecked() Handles EnableFinalSawCutChBx.Click
+      m_MainWindow.m_CurrentMachine.bEnableFinalSawCut = EnableFinalSawCutChBx.IsChecked
+      WritePrivateProfileString(S_MACH, K_ENABLEFINALSAWCUT, If(m_MainWindow.m_CurrentMachine.bEnableFinalSawCut, "1", "0"), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub FinalDepthTxBx_EgtClosed() Handles FinalDepthTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(FinalDepthTxBx.Text, dVal)
+      m_MainWindow.m_CurrentMachine.dFinalDepth = dVal
+      WritePrivateProfileString(S_MACH, K_FINALDEPTH, DoubleToString(m_MainWindow.m_CurrentMachine.dFinalDepth, 3), m_MainWindow.GetMachIniFile())
+   End Sub
+
 End Class

Machine/MachinePageUC.xaml

@@ -30,10 +30,10 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-               <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource DatiMacchinaImg1}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </ToggleButton>
             <ToggleButton Name="Alarms2Btn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-               <Image Source="{DynamicResource DatiMacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource DatiMacchinaImg2}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </ToggleButton>
             <ToggleButton Name="ToolsDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                <Image Source="{DynamicResource DB-lavorazioniImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>

Machine/MachineStatusUC.xaml.vb

@@ -236,6 +236,10 @@ Public Class MachineStatusUC
    End Sub
 
    Sub DisplayPosition()
+      Dim nNumDec As Integer = -3
+      If m_MainWindow.m_CNCommunication.GetMachineInInches() Then
+         nNumDec = -4
+      End If
       ' Recupero le posizioni macchina
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
@@ -247,33 +251,37 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis1TxBx.Text = LenToString(dL1, nNumDec, True)
-      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, nNumDec, True)
-      Axis3TxBx.Text = LenToString(dL3, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, nNumDec, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, nNumDec, True)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, nNumDec, True)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, nNumDec, True)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, nNumDec, True)
    End Sub
 
    Sub DisplayPositionDelta()
+      Dim nNumDec As Integer = -3
+      If m_MainWindow.m_CNCommunication.GetMachineInInches() Then
+         nNumDec = -4
+      End If
       ' Recupero le posizioni macchina
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis1TxBx.Text = LenToString(dL1, nNumDec, True)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, nNumDec, True)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, nNumDec, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, nNumDec, True)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, nNumDec, True)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, nNumDec, True)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, nNumDec, True)
    End Sub
 
    Sub DisplayFeed()
@@ -335,16 +343,16 @@ Public Class MachineStatusUC
 
    Sub DisplayActiveMode(Mode As Integer)
       Select Case Mode
-      Case 0
+         Case 0
-         MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Auto.png", UriKind.Relative))
+            MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Auto.png", UriKind.Relative))
-      Case 1
+         Case 1
-         MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Single.png", UriKind.Relative))
+            MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Single.png", UriKind.Relative))
-      Case 2
+         Case 2
-         MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Mdi.png", UriKind.Relative))
+            MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Mdi.png", UriKind.Relative))
-      Case 7
+         Case 7
-         MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Manual.png", UriKind.Relative))
+            MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Manual.png", UriKind.Relative))
-      Case 8
+         Case 8
-         MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Home.png", UriKind.Relative))
+            MachineStatusImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("\Resources\MachineStatusImage\Home.png", UriKind.Relative))
       End Select
    End Sub
 

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.7.7.2")>
+<Assembly: AssemblyVersion("2.7.8.2")>
-<Assembly: AssemblyFileVersion("2.7.7.2")>
+<Assembly: AssemblyFileVersion("2.7.8.2")>

NcComm/CNCommunication.vb

@@ -73,6 +73,11 @@ Public Class CNCommunication
    Private m_nA10 As Integer = 9
    Private m_bInInches As Boolean = False   ' Solo per comandi diretti (assi sempre in mm)
 
+   ' NUVO! ver. 2.7h2: m_sA1=nome (in grafica), tipo (Linear/Rotary), m_nA1=indice (nel vettore CN)
+   Private m_ListAxesData As New List(Of AxisData)
+   Public Function GetListAxesData() As List(Of AxisData)
+      Return m_ListAxesData
+   End Function
 
    Friend Sub CNCommunication_Initialization()
 
@@ -164,83 +169,149 @@ Public Class CNCommunication
       End If
    End Sub
 
+#Region "ver 2.7h2 NUOVA LETTURA ASSI"
+
+   ' Dal nome della chiave cerca di estrarre la definizione del tipo di asse
+   Private Sub GetDefaultTypeAxis(sKeyAxis As String, ByRef bIsLinear As Boolean)
+      ' non è stato definito il tipo asse: cerco di assegnarlo di default
+      Dim sMsg As String = String.Empty
+      If sKeyAxis.StartsWith("L") Then
+         sMsg = "Linear"
+         bIsLinear = True
+      ElseIf sKeyAxis.StartsWith("R") Then
+         sMsg = "Rotary"
+         bIsLinear = False
+      Else
+         sMsg = "Linear"
+         bIsLinear = True
+      End If
+      EgtOutLog("In file *.ini machine in section '[Axes]' axis type '" & sKeyAxis & "' has been defined by default as " & sMsg)
+   End Sub
+
+   ' Legge da file *.ini macchina la definizione del tipo di asse 
+   Private Function GetTypeAxis(sKeyAxis As String)
+      Dim bIsLinear As Boolean = True
+      Dim sValue As String = String.Empty
+      GetPrivateProfileString(S_AXES, sKeyAxis, "", sValue, m_MainWindow.GetMachIniFile())
+      If Not String.IsNullOrEmpty(sValue) Then
+         If sValue.ToLower = "linear" Then
+            bIsLinear = True
+         ElseIf sValue.ToLower = "rotary" Then
+            bIsLinear = False
+         Else
+            GetDefaultTypeAxis(sKeyAxis, bIsLinear)
+         End If
+      Else
+         GetDefaultTypeAxis(sKeyAxis, bIsLinear)
+      End If
+      ' Ritorno il booleano che definisce il tipo di asse che è stato letto
+      Return bIsLinear
+   End Function
+
+   ' Imposto il vettore dei tipi asse macchina
+   Private Sub SetArrayAxisIsLinear()
+      For Each Item As AxisData In m_ListAxesData
+         m_CN.b_axis_is_linear(Item.nIndex) = Item.bIsLinear
+      Next
+   End Sub
+
+   ' Legge da file *.ini macchina il nome dell'asse, se non esiste impone il valore di default e restituisce FALSE
+   Private Function SetNameAxis(sKeyAxis As String, sAxisDefaultName As String, ByRef sAxisName As String) As Boolean
+      Dim bAxisExist As Boolean = False
+      Dim sValue As String = String.Empty
+      bAxisExist = (GetPrivateProfileString(S_AXES, sKeyAxis, "", sValue, m_MainWindow.GetMachIniFile()) > 0)
+      If String.IsNullOrEmpty(sValue) Then
+         sAxisName = sAxisDefaultName
+      Else
+         sAxisName = sValue
+      End If
+      Return bAxisExist
+   End Function
+
+   Private Function SetIndexAxis(sKeyAxis As String, nAxisDefaultIndex As Integer, ByRef nAxisIndex As String) As Boolean
+      Dim bAxisExist As Boolean = True
+      nAxisIndex = GetPrivateProfileInt(S_AXES, sKeyAxis, nAxisDefaultIndex, m_MainWindow.GetMachIniFile())
+      If Not m_CN.VerifyAxis(nAxisIndex) Then
+         nAxisIndex = -1
+         m_bAxesOk = False
+         EgtOutLog("Error on " & sKeyAxis)
+         bAxisExist = False
+      End If
+      Return bAxisExist
+   End Function
+
    Private Sub ReadAxesData()
       ' Nomi e indici degli assi macchina: definisco il nome degli assi da satampare nella pagina MachineStatusUC
       m_bAxesOk = True
-      GetPrivateProfileString(S_AXES, K_L1NAME, "X", m_sA1, m_MainWindow.GetMachIniFile())
+      Dim bAxisExist As Boolean = False
-      m_nA1 = GetPrivateProfileInt(S_AXES, K_L1ID, 0, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_L1NAME, "X", m_sA1)
-      If Not m_CN.VerifyAxis(m_nA1) Then
+      If SetIndexAxis(K_L1ID, 0, m_nA1) Then
-         m_nA1 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_L1TYPE), m_sA1, m_nA1))
-         EgtOutLog("Error on L1ID")
       End If
-      GetPrivateProfileString(S_AXES, K_L2NAME, "Y", m_sA2, m_MainWindow.GetMachIniFile())
+
-      m_nA2 = GetPrivateProfileInt(S_AXES, K_L2ID, 1, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_L2NAME, "Y", m_sA2)
-      If Not m_CN.VerifyAxis(m_nA2) Then
+      If SetIndexAxis(K_L2ID, 1, m_nA2) Then
-         m_nA2 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_L2TYPE), m_sA2, m_nA2))
-         EgtOutLog("Error on L2ID")
       End If
-      GetPrivateProfileString(S_AXES, K_L3NAME, "Z", m_sA3, m_MainWindow.GetMachIniFile())
+
-      m_nA3 = GetPrivateProfileInt(S_AXES, K_L3ID, 2, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_L3NAME, "Z", m_sA3)
-      If Not m_CN.VerifyAxis(m_nA3) Then
+      If SetIndexAxis(K_L3ID, 2, m_nA3) Then
-         m_nA3 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_L3TYPE), m_sA3, m_nA3))
-         EgtOutLog("Error on L3ID")
       End If
-      GetPrivateProfileString(S_AXES, K_R1NAME, "C", m_sA4, m_MainWindow.GetMachIniFile())
+
-      m_nA4 = GetPrivateProfileInt(S_AXES, K_R1ID, 8, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_R1NAME, "C", m_sA4)
-      If Not m_CN.VerifyAxis(m_nA4) Then
+      If SetIndexAxis(K_R1ID, 8, m_nA4) Then
-         m_nA4 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_R1TYPE), m_sA4, m_nA4))
-         EgtOutLog("Error on R1ID")
       End If
-      GetPrivateProfileString(S_AXES, K_R2NAME, "B", m_sA5, m_MainWindow.GetMachIniFile())
+
-      m_nA5 = GetPrivateProfileInt(S_AXES, K_R2ID, 7, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_R2NAME, "B", m_sA5)
-      If Not m_CN.VerifyAxis(m_nA5) Then
+      If SetIndexAxis(K_R2ID, 7, m_nA5) Then
-         m_nA5 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_R2TYPE), m_sA5, m_nA5))
-         EgtOutLog("Error on R2ID")
       End If
-      GetPrivateProfileString(S_AXES, K_A6NAME, "A", m_sA6, m_MainWindow.GetMachIniFile())
+
-      m_nA6 = GetPrivateProfileInt(S_AXES, K_A6ID, 6, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_A6NAME, "A", m_sA6)
-      If Not m_CN.VerifyAxis(m_nA6) Then
+      If SetIndexAxis(K_A6ID, 6, m_nA6) Then
-         m_nA6 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_A6TYPE), m_sA6, m_nA6))
-         EgtOutLog("Error on A6ID")
       End If
-      GetPrivateProfileString(S_AXES, K_A7NAME, "U", m_sA7, m_MainWindow.GetMachIniFile())
+
-      m_nA7 = GetPrivateProfileInt(S_AXES, K_A7ID, 3, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_A7NAME, "U", m_sA7)
-      If Not m_CN.VerifyAxis(m_nA7) Then
+      If SetIndexAxis(K_A7ID, 3, m_nA7) Then
-         m_nA7 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_A7TYPE), m_sA7, m_nA7))
-         EgtOutLog("Error on A7ID")
       End If
-      GetPrivateProfileString(S_AXES, K_A8NAME, "V", m_sA8, m_MainWindow.GetMachIniFile())
+
-      m_nA8 = GetPrivateProfileInt(S_AXES, K_A8ID, 4, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_A8NAME, "V", m_sA8)
-      If Not m_CN.VerifyAxis(m_nA8) Then
+      If SetIndexAxis(K_A8ID, 4, m_nA8) Then
-         m_nA8 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_A8TYPE), m_sA8, m_nA8))
-         EgtOutLog("Error on A8ID")
       End If
-      GetPrivateProfileString(S_AXES, K_A9NAME, "W", m_sA9, m_MainWindow.GetMachIniFile())
+
-      m_nA9 = GetPrivateProfileInt(S_AXES, K_A9ID, 5, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_A9NAME, "W", m_sA9)
-      If Not m_CN.VerifyAxis(m_nA9) Then
+      If SetIndexAxis(K_A9ID, 5, m_nA9) Then
-         m_nA9 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_A9TYPE), m_sA9, m_nA9))
-         EgtOutLog("Error on A9ID")
       End If
-      GetPrivateProfileString(S_AXES, K_A10NAME, "P", m_sA10, m_MainWindow.GetMachIniFile())
+
-      m_nA10 = GetPrivateProfileInt(S_AXES, K_A10ID, 5, m_MainWindow.GetMachIniFile())
+      bAxisExist = SetNameAxis(K_A10NAME, "P", m_sA10)
-      If Not m_CN.VerifyAxis(m_nA10) Then
+      If SetIndexAxis(K_A10ID, 5, m_nA10) Then
-         m_nA10 = -1
+         ' aggiungo l'asse alla lista degli assi
-         m_bAxesOk = False
+         If bAxisExist Then m_ListAxesData.Add(New AxisData(GetTypeAxis(K_A10TYPE), m_sA10, m_nA10))
-         EgtOutLog("Error on A10ID")
       End If
+
       ' Unità di misura
       m_bInInches = (GetPrivateProfileInt(S_AXES, K_ININCHES, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Crea il vettore che ad ogni posizione definisce il tipo di asse assegnato
+      SetArrayAxisIsLinear()
    End Sub
 
+#End Region    ' ver 2.7h2 nuova gestione
+
    Private Sub KillSimensCom(sProcessName As String)
       Dim sAppName As String = Path.GetFileNameWithoutExtension(sProcessName)
       Dim pList() As System.Diagnostics.Process = System.Diagnostics.Process.GetProcesses
@@ -1809,3 +1880,15 @@ Public Class IndexArrayToBit
    End Sub
 
 End Class
+
+' Utlizzata per definire la lista degli assi impostati in macchina
+Public Class AxisData
+   Public bIsLinear As Boolean
+   Public sName As String
+   Public nIndex As Integer
+   Sub New(_bIsLinear As Boolean, _sName As String, _nINdex As Integer)
+      bIsLinear = _bIsLinear
+      sName = _sName
+      nIndex = _nINdex
+   End Sub
+End Class

NcComm/CN_generico.vb

@@ -131,6 +131,8 @@ Public MustInherit Class CN_generico
    Public d_axis_position(MAX_AXES) As Double
    Public d_axis_delta(MAX_AXES) As Double
    Public b_axis_valid(MAX_AXES) As Boolean
+   ' ver. 2.7h2: gestione del tipo di asse per eseguire una corretta conversione dei dati inch/mm
+   Public b_axis_is_linear(MAX_AXES) As Boolean
 
    Public d_DReadELS_value As Double
    Public n_DReadELS_handle As Short

NcComm/M_MMFiles.vb

@@ -734,15 +734,26 @@ Module M_MMFiles
          ' Copia delle quote degli assi
          For nI As Integer = 0 To (m_Axes_Id.Count() - 1)
             Dim nId As Short = m_Axes_Id(nI)
-            ' agli assi lineari devo applicare il coefficiente
+
-            If (nId Mod 10) < 3 Then
+            '' agli assi lineari devo applicare il coefficiente
-               CurrCN.d_axis_position(nI) = SiemensRet.d_interf_axis_position(nId) * LinCoeff
+            'If (nId Mod 10) < 3 Then
-               CurrCN.d_axis_delta(nI) = SiemensRet.d_interf_axis_delta(nId) * LinCoeff
+            '   CurrCN.d_axis_position(nI) = SiemensRet.d_interf_axis_position(nId) * LinCoeff
-            ' gli assi rotanti sono sempre in gradi
+            '   CurrCN.d_axis_delta(nI) = SiemensRet.d_interf_axis_delta(nId) * LinCoeff
-            Else
+            '   ' gli assi rotanti sono sempre in gradi
-               CurrCN.d_axis_position(nI) = SiemensRet.d_interf_axis_position(nId)
+            'Else
-               CurrCN.d_axis_delta(nI) = SiemensRet.d_interf_axis_delta(nId)
+            '   CurrCN.d_axis_position(nI) = SiemensRet.d_interf_axis_position(nId)
+            '   CurrCN.d_axis_delta(nI) = SiemensRet.d_interf_axis_delta(nId)
+            'End If
+
+            ' ver 2.7h2
+            CurrCN.d_axis_position(nI) = SiemensRet.d_interf_axis_position(nId)
+            CurrCN.d_axis_delta(nI) = SiemensRet.d_interf_axis_delta(nId)
+            ' verifico se l'indice 'i' è associato ad un asse rotativo oppure lineare
+            If CurrCN.b_axis_is_linear(nI) Then
+               CurrCN.d_axis_position(nI) *= LinCoeff
+               CurrCN.d_axis_delta(nI) *= LinCoeff
             End If
+
          Next
 
          ' Copia variabili R

OmagCUT.vbproj

@@ -1447,6 +1447,12 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\icoBottom-3D.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DatiMacchina1.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\DatiMacchina2.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -484,7 +484,7 @@
    </Style>
 
    <Style x:Key="OmagCut_CurrProjSummeryTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_LowerCaseCharacterTextBlock}">
-      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
       <Setter Property="TextWrapping" Value="NoWrap"/>
       <Setter Property="Margin" Value="6,0,0,0"/>
    </Style>
@@ -639,10 +639,10 @@
    </Style>
 
    <Style x:Key="OmagCut_LowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}">
+      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
       <Setter Property="TextWrapping" Value="Wrap"/>
       <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <Setter Property="VerticalAlignment" Value="Center"/>
-      <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
    </Style>
 
    <DataTemplate x:Key="GroupBoxHeaderTemplate">
@@ -748,8 +748,80 @@
 
    <!--TextBlock per elementi delle ListBox-->
 
-   <Style x:Key="OmagCut_ListBoxTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_LowerCaseCharacterTextBlock}">
+   <Style x:Key="OmagCut_ListBoxTextBlock" TargetType="{x:Type TextBlock}">
-      <Setter Property="TextWrapping" Value="NoWrap"/>
+      <Setter Property="TextWrapping" Value="Wrap"/>
+      <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <Setter Property="VerticalAlignment" Value="Center"/>
+   </Style>
+
+   <!--DataTemplate testo ed immagine-->
+   <DataTemplate x:Key="DataTemplateItem">
+      <Grid >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0,8,6,4" />-->
+         <Image Grid.Column="0" Source="{Binding PictureString}" Style="{DynamicResource OmagCut_ListBoxIcon}" />
+         <!--<TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" VerticalAlignment="Center" />-->
+         <TextBlock Grid.Column="1" Text="{Binding Name}" Style="{DynamicResource OmagCut_ListBoxTextBlock}" />
+      </Grid>
+   </DataTemplate>
+
+   <!-- ListBoxItem -->
+
+   <Style x:Key="ItemList" TargetType="{x:Type ListBoxItem}">
+      <Setter Property="Background" Value="Transparent"/>
+      <Setter Property="BorderBrush" Value="Transparent"/>
+      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="BorderThickness" Value="2"/>
+      <Setter Property="Margin" Value="1,0,1,0"/>
+      <Setter Property="HorizontalContentAlignment" Value="{Binding HorizontalContentAlignment, RelativeSource={RelativeSource AncestorType={x:Type ItemsControl}}}"/>
+      <Setter Property="VerticalContentAlignment" Value="{Binding VerticalContentAlignment, RelativeSource={RelativeSource AncestorType={x:Type ItemsControl}}}"/>
+      <Setter Property="Padding" Value="2"/>
+      <Setter Property="Template">
+         <Setter.Value>
+            <ControlTemplate TargetType="{x:Type ListBoxItem}">
+               <Border x:Name="Bd"
+							  BorderBrush="{TemplateBinding BorderBrush}"
+							  BorderThickness="{TemplateBinding BorderThickness}"
+							  Background="{TemplateBinding Background}"
+							  Padding="{TemplateBinding Padding}"
+							  Margin="{TemplateBinding Margin}"
+							  SnapsToDevicePixels="true">
+                  <ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
+							               SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"
+							               VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/>
+               </Border>
+               <ControlTemplate.Triggers>
+                  <Trigger Property="IsSelected" Value="true">
+                     <Setter Property="Background" TargetName="Bd" Value="LightGray"/>
+                     <Setter Property="BorderBrush" TargetName="Bd" Value="White"/>
+                  </Trigger>
+                  <MultiTrigger>
+                     <MultiTrigger.Conditions>
+                        <Condition Property="IsSelected" Value="false"/>
+                        <Condition Property="IsMouseOver" Value="true"/>
+                     </MultiTrigger.Conditions>
+                     <Setter Property="Foreground" Value="Black"/>
+                     <Setter Property="Background" TargetName="Bd" Value="LightGray"/>
+                     <Setter Property="BorderBrush" TargetName="Bd" Value="LightGray"/>
+                  </MultiTrigger>
+                  <MultiTrigger>
+                     <MultiTrigger.Conditions>
+                        <Condition Property="IsSelected" Value="true"/>
+                        <Condition Property="Selector.IsSelectionActive" Value="false"/>
+                     </MultiTrigger.Conditions>
+                     <Setter Property="Background" TargetName="Bd" Value="LightGray"/>
+                     <Setter Property="BorderBrush" TargetName="Bd" Value="White"/>
+                  </MultiTrigger>
+                  <Trigger Property="IsEnabled" Value="false">
+                     <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                  </Trigger>
+               </ControlTemplate.Triggers>
+            </ControlTemplate>
+         </Setter.Value>
+      </Setter>
    </Style>
 
 </ResourceDictionary>

OmagCUTDictionary.xaml

@@ -194,7 +194,8 @@
    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
 
    <!--Machine-->
-   <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
+   <BitmapImage x:Key="DatiMacchinaImg1" UriSource="Resources/NewIcons/DatiMacchina1.png"></BitmapImage>
+   <BitmapImage x:Key="DatiMacchinaImg2" UriSource="Resources/NewIcons/DatiMacchina2.png"></BitmapImage>
    <BitmapImage x:Key="DB-lavorazioniImg" UriSource="Resources/NewIcons/DB-lavorazioni.png"></BitmapImage>
    <BitmapImage x:Key="DB-utensiliImg" UriSource="Resources/NewIcons/DB-utensili.png"></BitmapImage>
    <BitmapImage x:Key="MacchinaImg" UriSource="Resources/NewIcons/Macchina.png"></BitmapImage>
@@ -1039,6 +1040,7 @@
 
    <!--TextBlock per elementi delle ListBox-->
    <Style x:Key="OmagCut_LowerCaseCharacterTextBlock" TargetType="{x:Type TextBlock}">
+      <Setter Property="Foreground" Value="{StaticResource Omag_Black}"/>
       <Setter Property="TextWrapping" Value="Wrap"/>
       <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <Setter Property="VerticalAlignment" Value="Center"/>
@@ -1046,6 +1048,8 @@
 
    <Style x:Key="OmagCut_ListBoxTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_LowerCaseCharacterTextBlock}">
       <Setter Property="TextWrapping" Value="NoWrap"/>
+      <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <Setter Property="VerticalAlignment" Value="Center"/>
    </Style>
 
    <Style x:Key="OmagCut_CurrProjSummeryTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_LowerCaseCharacterTextBlock}">
@@ -1115,9 +1119,10 @@
 
    <!-- ListBoxItem -->
 
-   <Style TargetType="{x:Type ListBoxItem}">
+   <Style x:Key="ItemList" TargetType="{x:Type ListBoxItem}">
       <Setter Property="Background" Value="Transparent"/>
       <Setter Property="BorderBrush" Value="Transparent"/>
+      <Setter Property="Foreground" Value="Black"/>
       <Setter Property="BorderThickness" Value="2"/>
       <Setter Property="Margin" Value="1,0,1,0"/>
       <Setter Property="HorizontalContentAlignment" Value="{Binding HorizontalContentAlignment, RelativeSource={RelativeSource AncestorType={x:Type ItemsControl}}}"/>

Project/CurrentProjectPageUC.xaml.vb

@@ -330,13 +330,18 @@ Public Class CurrentProjectPageUC
          EgtSetCurrentContext(CurrentProjectScene.GetCtx())
          ' Cancello eventuali messaggi
          ClearMessage()
+         ' Se è stata modificata l'uso della lama inclinata allora aggiorno anche questa lavorazione
+         If m_MainWindow.m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+            ' assegno la lavorazione corrente per i tagli di lama inclinati (solo se specificato nella ComboBox della ChooseMachinig)
+            RestoreDef_Machinig(True)
+         End If
          ' Ricalcolo tutte le lavorazioni
          Dim nWarn As Integer = 0
          ResetAllMachinings(nWarn)
          If nWarn = 1 Then SetWarningMessage(EgtMsg(90351)) ' Lama troppo grande per utilizzo ventosa
-         ' Aggiorno visualizzazione
+            ' Aggiorno visualizzazione
-         EgtDraw()
+            EgtDraw()
-      End If
+         End If
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseDownScene

Project/OpenPageUC.xaml

@@ -36,7 +36,7 @@
             </Grid.ColumnDefinitions>
          </Grid>
 
-         <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" 
+         <TextBlock Name="FilePathTxBl" Grid.Row="0" 
                     Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
 
          <Grid Grid.Row="1" Grid.RowSpan="2">
@@ -46,7 +46,8 @@
             </Grid.RowDefinitions>
             <ListBox Name="FileListBox"  
                      ItemTemplate="{DynamicResource DataTemplateItem}"
-                     ItemsSource="{Binding ItemList}"/>
+                     ItemsSource="{Binding ItemList}"
+                     ItemContainerStyle="{DynamicResource ItemList}"/>
 
             <Grid Grid.Row="1" Margin="0,0,8,0">
                <Grid.ColumnDefinitions>

Project/ProjectMgrUC.xaml

@@ -56,10 +56,10 @@
                 PlacementTarget="{Binding ElementName=ResetCutBtn}">
             <WrapPanel Orientation="Vertical" 
                        Background="{DynamicResource OmagCut_Gray}">
-               <Button x:Name="ResetCut1Btn"
+               <Button x:Name="ResetCut2Btn"
                        Width ="78" Height="78"
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <Button x:Name="ResetCut2Btn"
+               <Button x:Name="ResetCut1Btn"
                        Width ="78" Height="78"
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
             </WrapPanel>

Project/ProjectMgrUC.xaml.vb

@@ -2,6 +2,9 @@
 Imports EgtWPFLib
 
 Public Class ProjectMgrUC
+   ' Creo una varibile statica per verificare di non stampare due volte lo stesso messaggio
+   Public Shared bFirstRun As Boolean = True
+
    ' Riferimenti a pagine (condivisi tra tutte le istanze della classe)
    Private Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private Shared m_CurrProjPage As CurrentProjectPageUC
@@ -11,6 +14,7 @@ Public Class ProjectMgrUC
    ' usato per scrivere i comadi di movimento test lavorazione
    Friend m_CN As CN_generico
 
+   ' L'inizializzazine avviene 2 volte: una per i tagli CAD ed una per le cornici
    Private Sub ProjectMgrUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Imposto i messaggi letti dal file dei messaggi
       NewBtn.ToolTip = EgtMsg(90303)                                   ' Nuovo
@@ -21,9 +25,12 @@ Public Class ProjectMgrUC
       VeinMatchingBtn.ToolTip = EgtMsg(90309)                          ' Vein Match
 
       RegisterBtn.Content = "REG"                                      ' Shape Registration
-      ResetCutBtn.Content = EgtMsg(90336)                              ' Reset
+
-      ResetCut2Btn.Content = EgtMsg(91024)                             ' Reset lavorazioni
+      'ResetCutBtn.Content = EgtMsg(90336)                              ' Reset
-      ResetCut1Btn.Content = EgtMsg(91025)                             ' Aggiorna feed/speed
+      'ResetCut2Btn.Content = EgtMsg(91024)                             ' Reset lavorazioni
+      'ResetCut1Btn.Content = EgtMsg(91025)                             ' Aggiorna feed/speed
+      PopulateListCmdReset()
+
       SimulateBtn.ToolTip = EgtMsg(90301)                              ' Simulate - Simula
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
          WorkBtn.ToolTip = EgtMsg(90310)                               ' Export - Esporta
@@ -255,6 +262,8 @@ Public Class ProjectMgrUC
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut
    End Sub
 
+#Region "RESET"
+
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
       If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
          If ResetCutPopUp.IsOpen Then
@@ -263,18 +272,28 @@ Public Class ProjectMgrUC
             ResetCutPopUp.IsOpen = True
          End If
       Else
-         ResetCut3Btn_Click()
+         CallFunction(0)
       End If
    End Sub
 
    ' Reimposto le feed di tutte le lavorazioni
    Private Sub ResetCut1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut1Btn.Click
+      CallFunction(1)
+   End Sub
+
+   ' Reimposto le lavorazioni di default e ripristino i parametri
+   Private Sub ResetCut2Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut2Btn.Click
+      CallFunction(2)
+   End Sub
+
+   ' Reimposto le feed di tutte le lavorazioni
+   Private Sub FeedReset()
       ' eseguo il ricalcolo delle sole FEED di lavorazione
       UpdateFeedAllMachining()
    End Sub
 
    ' Reimposto le lavorazioni di default e ripristino i parametri
-   Private Sub ResetCut2Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut2Btn.Click
+   Private Sub HardReset()
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -307,7 +326,7 @@ Public Class ProjectMgrUC
    End Sub
 
    ' Resetta i valori dei parametri (ma non le lavorazioni)
-   Private Sub ResetCut3Btn_Click()
+   Private Sub StandardReset()
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -333,6 +352,96 @@ Public Class ProjectMgrUC
       EgtDraw()
    End Sub
 
+   Private Const HARD_RESET As String = "HARD"
+   Private Const STANDARD_RESET As String = "STANDARD"
+   Private Const FEED_RESET As String = "FEED"
+
+   Private Enum RESET_TYPE
+      HARD
+      STANDARD
+      FEED
+   End Enum
+
+   Private m_ListCmdReset As New List(Of RESET_TYPE) From {RESET_TYPE.HARD, RESET_TYPE.STANDARD, RESET_TYPE.FEED}
+
+   Private Sub CallFunction(IndexListCmdReset As Integer)
+      Select Case m_ListCmdReset(IndexListCmdReset)
+         Case RESET_TYPE.STANDARD
+            EgtOutLog("STNADRD Reset")
+            StandardReset()
+         Case RESET_TYPE.HARD
+            EgtOutLog("HARD Reset")
+            HardReset()
+         Case RESET_TYPE.FEED
+            EgtOutLog("FEED Reset")
+            FeedReset()
+      End Select
+   End Sub
+
+   Private Sub SetBtnResetContent(IndexListCmdReset As Integer, Btn As Button)
+      Select Case m_ListCmdReset(IndexListCmdReset)
+         Case RESET_TYPE.STANDARD
+            Btn.Content = EgtMsg(90336)                             ' Reset
+         Case RESET_TYPE.HARD
+            Btn.Content = EgtMsg(91024)                             ' Reset lavorazioni
+         Case RESET_TYPE.FEED
+            Btn.Content = EgtMsg(91025)                             ' Aggiorna feed/speed
+      End Select
+   End Sub
+
+   Private Sub PopulateListCmdReset()
+      Dim sConfig As String = "HARD,STANDARD,FEED"
+      GetPrivateProfileString(S_GENERAL, "ResetCmd", sConfig, sConfig, m_MainWindow.GetIniFile())
+      Dim sItems As String() = sConfig.Split(",")
+      ' VERIFICA della lettura configurazione
+      If sItems.Count <> 3 Then
+         If bFirstRun Then
+            EgtOutLog("WARNING configurazione: in Config.ini del programma nella sezione 'General/ResetCmd' " &
+                   "non trovato una sequenza del tipo 'HARD,STANDARD,FEED'")
+         End If
+      Else
+         Dim bOk As Boolean = True
+         Dim sErrMsg As String = String.Empty
+         ' popolo una lista di appoggio
+         Dim TempList As New List(Of RESET_TYPE) From {RESET_TYPE.STANDARD, RESET_TYPE.STANDARD, RESET_TYPE.STANDARD}
+         For Index As Integer = 0 To sItems.Count - 1
+            If sItems(Index).Trim = STANDARD_RESET Then
+               TempList(Index) = RESET_TYPE.STANDARD
+            ElseIf sItems(Index).Trim = HARD_RESET Then
+               TempList(Index) = RESET_TYPE.HARD
+            ElseIf sItems(Index).Trim = FEED_RESET Then
+               TempList(Index) = RESET_TYPE.FEED
+            Else
+               bOk = False
+               sErrMsg = sErrMsg & If(String.IsNullOrEmpty(sErrMsg), "", ",") & sItems(Index).Trim
+            End If
+         Next
+         ' verifico che non ci siano elementi ripetuti nella lista
+         If Not bOk Then
+            If bFirstRun Then
+               EgtOutLog("WARNING configurazione: in Config.ini del programma nella sezione 'General/ResetCmd' " &
+                      "non trovato una sequenza del tipo 'HARD,STANDARD,FEED' (i seguenti parametri non sono decodificati: " &
+                      sErrMsg & " )")
+            End If
+         ElseIf TempList(0) = TempList(1) Or TempList(0) = TempList(2) Or TempList(1) = TempList(2) Then
+            If bFirstRun Then
+               EgtOutLog("WARNING configurazione: in Config.ini del programma nella sezione 'General/ResetCmd' " &
+                      "non trovato una sequenza del tipo 'HARD,STANDARD,FEED' (due o più dati sono ripetuti)")
+            End If
+         Else
+               m_ListCmdReset = TempList
+         End If
+      End If
+
+      SetBtnResetContent(0, ResetCutBtn)
+      SetBtnResetContent(1, ResetCut1Btn)
+      SetBtnResetContent(2, ResetCut2Btn)
+
+      bFirstRun = False
+   End Sub
+
+#End Region  ' Reset
+
    Private Sub SimulateBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulateBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -923,35 +1032,32 @@ Public Class ProjectMgrUC
    End Sub
 
    Public Sub UpdateFeedAllMachining()
-      ' recupero il valore di Feed della lavorazione corrente
+      Dim SettedMachinig As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, SettedMachinig)
+
+      ' Parametri della lavorazione letta da DB
       Dim sMachiningName As String = String.Empty
-      If Not EgtMdbGetCurrMachiningParam(MCH_MP.NAME, sMachiningName) Then
-         ' errore: lavorazione non trovata
-         EgtOutLog(" - Prima di 'Reset Feed' accedere alla pagina MACCHINA!")
-         'm_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Salvare la lavorazione corrente")
-         Return
-      End If
       Dim dFeed As Double = 0
-      EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
       Dim dFeedStarted As Double = 0
-      EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
       Dim dFeedEnded As Double = 0
-      EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
       Dim dFeedTipped As Double = 0
-      EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
       Dim dFeedBack As Double = 0
-      EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
       Dim dFeedSideAng As Double = 0
-      EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+      ' Elenco delle lavorazioni
       Dim MachiningList As New List(Of SplitMach)
 
       ' Recupero l'indice della fase corrente
       Dim nCurrPhase As Integer = 1
       ' recupero in numero di fasi presenti nel progetto
       Dim nCountPhase As Integer = EgtGetPhaseCount()
-      ' ciclo su tutte le fasi di lavorazione
+      ' Numero di lavorazioni del progetto (conteggiate nel ciclo for)
       Dim nMach As Integer = 0
+      ' Numero di lavorazioni aggiornate (conteggate nel ciclo for)
       Dim nMachUpdated As Integer = 0
+      ' Elenco dei nomi lavorazioni aggiorniate
+      Dim UpdateMachinigNameList As New List(Of String)
+
+      ' ciclo su tutte le fasi di lavorazione
       For IndexPhase As Integer = 1 To nCountPhase
          ' imposto la fase corrente
          nCurrPhase = IndexPhase
@@ -963,6 +1069,31 @@ Public Class ProjectMgrUC
             Dim nOperId As Integer = MachiningList(IndexMachining).m_nId
             ' setto la lavorazione come corrente
             If EgtSetCurrMachining(nOperId) Then
+               Dim sCurrMachiningName As String = String.Empty
+               EgtGetMachiningParam(MCH_MP.NAME, sCurrMachiningName)
+               ' Se la lavorazione corrente da DB è diversa da quella della lavorazione allora aggiorno i dati
+               If sCurrMachiningName <> sMachiningName Then
+                  sMachiningName = sCurrMachiningName
+                  ' Recupero la lavorazione dell'operazione indicata
+                  If Not EgtMdbSetCurrMachining(sMachiningName) Then
+                     EgtOutLog("ERRORE: Machining '" & sMachiningName & "' does not exist in DB of machining.")
+                     sMachiningName = String.Empty
+                     Continue For
+                  End If
+                  EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
+                  EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+                  EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+                  EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+                  EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+                  EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+               Else
+                  ' verifico se è stata applicata una variazione delle Feed 
+                  If UpdateMachinigNameList.FindIndex(Function(x) x = sCurrMachiningName) = -1 Then
+                     ' La lavorazione corrente non ha nessun parametro nuovo
+                     Continue For
+                  End If
+               End If
+
                Dim bUpdate As Boolean = False
                ' STANDARD
                Dim dOrigFeed As Double
@@ -1021,10 +1152,24 @@ Public Class ProjectMgrUC
                ' conto il numero di lavorazioni aggiornate
                If bUpdate Then
                   nMachUpdated += 1
+                  If UpdateMachinigNameList.FindIndex(Function(x) x = sCurrMachiningName) = -1 Then
+                     UpdateMachinigNameList.Add(sCurrMachiningName)
+                  End If
                End If
             End If
          Next
       Next
+
+      If UpdateMachinigNameList.Count > 0 Then
+         Dim sMsg As String = String.Empty
+         For Each Item As String In UpdateMachinigNameList
+            sMsg = sMsg & If(String.IsNullOrEmpty(sMsg), "", ",") & Item
+         Next
+         EgtOutLog("Le lavorazioni aggiornate sono: " & sMsg)
+      Else
+         EgtOutLog("Nessuna lavorazione è stata aggiornata: Feed da DB uguali a quelle impostate nelle lavorazioni")
+      End If
+
       m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(91243) & nMachUpdated & "/ " & nMach)      ' Lavorazione aggiornate: 
    End Sub
 

RawPhoto/Camera.vb

@@ -197,6 +197,8 @@ Public Class Camera
 
    ' OK: Avvio un processo per ogni tavola presente in macchina
    Public Function CamerasHide() As Boolean
+      If Not m_bCameraLink Then Return False
+
       ' Lancio il programma in cieco, se già attivo lo nascondo
       m_nCameraCount = GetTableCount()
 
@@ -215,12 +217,13 @@ Public Class Camera
                ' Gestisco correttamente solo il caso: 2 tavole e 1 camera
                m_nCameraCount = m_nCameraCount - 1
             Case Else
-               EgtOutLog(" 🚨 CAUTION : Differenza tra numero di camere e numero di tavole: " & DeltaCameraTab.ToString &
+               EgtOutLog(" --> CAUTION : Differenza tra numero di camere e numero di tavole: " & DeltaCameraTab.ToString &
                          ", sarà attivata solo la prima camera.")
                DeltaCameraTab = 0
          End Select
       Else
-         EgtOutLog(" 🚨 CAUTION : In file *.ini machine '[Photo]' there is not param 'CameraCounter'.")
+         ' 🚨 CAUTION: 
+         EgtOutLog(" --> CAUTION : In file *.ini machine '[Photo]' there is not param 'CameraCounter'.")
          ' Aggiungo un altro processo se camera Hq abilitata (non esite una vera tavola associata)
          If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
             m_nCameraCount = m_nCameraCount + 1

Utility/Utility.vb

@@ -45,140 +45,9 @@ Module Utility
 
    '--------------------------------------------------------------------------------------------------
 #Region "INCHES FRACTIONS"
-   'Enum FractionPattern
+   ' seleziona il tipo di Pattern di stampa dei dati
-   '   None
-   '   Feet_Inches
-   '   Inches
-   'End Enum
-
-   '' seleziona il tipo di Pattern con cui stamoare i dati
    Friend nCurrFractionPattern As FractionStringConverter.FractionPattern = FractionPattern.Feet_Inches
    Friend dPrecision As Double = 64
-
-   'Friend Function StringFractionToStringDecimal(dVal As Double, dBase As Double) As String
-   '   Dim sSign As String = String.Empty
-   '   If dVal < 0 Then
-   '      sSign = "-"
-   '      dVal = Math.Abs(dVal)
-   '   End If
-   '   Dim sFraction As String = String.Empty
-   '   ' integer and decima part of the value
-   '   Dim dInteger As Double = Math.Floor(dVal)
-   '   Dim dFraction As Double = dVal - dInteger
-   '   ' the nearest decimal numerator  
-   '   Dim dNumeretor As Double = dFraction * dBase
-   '   Dim dRound As Double = Math.Round(dNumeretor)
-   '   ' estimates the irreducible fraction
-   '   If dRound = 0 Then
-   '      ' no decimal part
-   '   ElseIf dRound = dBase Then
-   '      ' no decimal part
-   '      dInteger = dInteger + 1
-   '   Else
-   '      ' simplify fraction
-   '      While dRound Mod 2 = 0
-   '         dRound = dRound / 2
-   '         dBase = dBase / 2
-   '      End While
-   '      sFraction = DoubleToString(dRound, 0) & "/" & DoubleToString(dBase, 0)
-   '   End If
-   '   ' sVal: dFeet'dInteger"sFraction --- dInteger sFraction
-   '   Return WriteFraction(dInteger, sFraction)
-   'End Function
-
-   '' trasforma il valore da pollici a piedi
-   'Private Sub ConvertInchesToFeet(ByRef dFeet As Double, ByRef dInches As Double)
-   '   If dInches = 0 Then Return
-   '   While dInches - 12 >= 0
-   '      dFeet = dFeet + 1
-   '      dInches = dInches - 12
-   '   End While
-   'End Sub
-
-   '' stampa dati in funzione del pattern dichiarato
-   'Private Function WriteFraction(ByVal dInches As Double, sFraction As String) As String
-   '   Dim sVal As String = String.Empty
-   '   Select Case nCurrFractionPattern
-   '      Case FractionPattern.Feet_Inches
-   '         Dim dFeet As Double = 0
-   '         ConvertInchesToFeet(dFeet, dInches)
-   '         If dFeet > 0 Then
-   '            sVal = String.Format("{0}'{1}""{2}", DoubleToString(dFeet, 0), DoubleToString(dInches, 0), sFraction).Trim
-   '         Else
-   '            sVal = String.Format("{0}""{1}", DoubleToString(dInches, 0), sFraction).Trim
-   '         End If
-   '      Case FractionPattern.Inches
-   '         sVal = DoubleToString(dInches, 0) & " " & sFraction
-   '         sVal = String.Format("{0}""{1}", DoubleToString(dInches, 0), sFraction).Trim
-   '   End Select
-   '   Return sVal
-   'End Function
-
-   '' riceve la stringa sorgente e restituisce la nuova strunga in formato decimale (senza eseguire conversioni di unità)
-   'Friend Function StringFractionToDouble(sVal As String, ByRef sValConverted As String) As Boolean
-   '   Dim dVal As Double = 0
-   '   ' dato in ingresso: sVal = 2'3"23/32
-   '   Dim sFeet As String = String.Empty
-   '   Dim sFeetPattern As String = "^.*?(?=')"
-   '   Dim dFeet As Double = 0
-   '   Dim bOkFeet As Boolean = True
-   '   Dim bFeetExists As Boolean = False
-   '   Dim sInch As String = String.Empty
-   '   Dim sInchPattern As String = "(?<=')(.*?)(?="")"   ' se la stringa contiene l'apice singolo
-   '   Dim sInchPattern1 As String = "(.*?)(?="")"        ' se la stringa NON contiene l'apice singolo
-   '   Dim dInch As Double = 0
-   '   Dim bOkInch As Boolean = True
-   '   Dim bInchExists As Boolean = False
-   '   Dim sFraction As String = String.Empty
-   '   Dim sFractionPattern As String = "(?<="")(.*)"      ' se la stringa contiene l'apice doppio
-   '   Dim sFractionPattern1 As String = "(?<=')(.*)"      ' se la stringa NON contiene l'apice doppio ma solo quello singolo
-   '   Dim dFraction As Double = 0
-   '   Dim bOkFraction As Boolean = True
-   '   Dim bFractionExists As Boolean = False
-
-   '   ' recupero il valore di Feet (2')
-   '   Dim sMyMatch As String = Regex.Match(sVal, sFeetPattern).Groups(1).Value
-   '   If Not String.IsNullOrEmpty(sMyMatch) Or Not String.IsNullOrWhiteSpace(sMyMatch) Then
-   '      sFeet = sMyMatch.Trim
-   '      bOkFeet = StringToDouble(sFeet, dFeet)
-   '      bFeetExists = True
-   '   End If
-
-   '   ' recupero il valore di Inch (3") dopo i Feet - oppure direttamente i pollici
-   '   If bFeetExists Then
-   '      sMyMatch = Regex.Match(sVal, sInchPattern).Groups(1).Value
-   '   Else
-   '      sMyMatch = Regex.Match(sVal, sInchPattern1).Groups(1).Value
-   '   End If
-   '   If Not String.IsNullOrEmpty(sMyMatch) Or Not String.IsNullOrWhiteSpace(sMyMatch) Then
-   '      sInch = sMyMatch.Trim
-   '      bOkInch = StringToDouble(sInch, dInch)
-   '      bInchExists = True
-   '   End If
-
-   '   ' recupero il valore frazionario (23/32) dopo i pollici - oppure dopo i feet - oppure direttamente i valore inteso come pollici
-   '   If bInchExists Then
-   '      sMyMatch = Regex.Match(sVal, sFractionPattern).Groups(1).Value
-   '   ElseIf bFeetExists And Not bInchExists Then
-   '      sMyMatch = Regex.Match(sVal, sFractionPattern1).Groups(1).Value
-   '   ElseIf Not bFeetExists And Not bInchExists Then
-   '      sMyMatch = sVal
-   '   End If
-   '   If Not String.IsNullOrEmpty(sMyMatch) Or Not String.IsNullOrWhiteSpace(sMyMatch) Then
-   '      sFraction = sMyMatch
-   '      bOkFraction = StringToDouble(sFraction, dFraction)
-   '   End If
-
-   '   ' calcolo il valore decimale dell'espressione
-   '   If bOkFeet And bOkInch And bOkFraction Then
-   '      dVal = dFeet / 12 + dInch + dFraction
-   '      sValConverted = DoubleToString(dVal, 4)
-   '      Return True
-   '   Else
-   '      Return False
-   '   End If
-   'End Function
-
 #End Region    ' Inches Fraction
    '--------------------------------------------------------------------------------------------------