diff --git a/CadCuts/NestPageUC.xaml.vb b/CadCuts/NestPageUC.xaml.vb
index f6c4975..cdd87c1 100644
--- a/CadCuts/NestPageUC.xaml.vb
+++ b/CadCuts/NestPageUC.xaml.vb
@@ -168,6 +168,7 @@ Public Class NestPageUC
                   m_CurrSelectedCurv = nIdMy
                   EgtSelectObj(nIdSaw)
                   EgtSelectObj(nIdMy)
+                  EgtDraw()
                   Exit While
                End If
 
diff --git a/Constants/ConstMachIni.vb b/Constants/ConstMachIni.vb
index 354f9a3..1e7d119 100644
--- a/Constants/ConstMachIni.vb
+++ b/Constants/ConstMachIni.vb
@@ -44,6 +44,7 @@
 
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
+   Public Const K_NEWCONSOLE As String = "NewConsole"
    Public Const K_COMM As String = "Comm"
    Public Const K_REFRESH As String = "Refresh"
    Public Const K_MODE As String = "Mode"
@@ -98,7 +99,12 @@
    Public Const K_VACUUMOFF As String = "VacuumOff"
    Public Const K_BYPASSTATE As String = "BypassState"
    Public Const K_FEEDHOLD As String = "FeedHold"
+   ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
+   Public Const K_XYAXES As String = "XYAxes"
+   Public Const K_ZAXES As String = "ZAxes"
+   Public Const K_BCAXES As String = "BCAxes"
+   Public Const K_POWERON As String = "PowerON"
 
    Public Const S_PRODUCTIONLINE As String = "ProductionLine"
    Public Const K_ACTIVE As String = "Active"
diff --git a/DirectCuts/DirectCutPageUC.xaml b/DirectCuts/DirectCutPageUC.xaml
index e1cafd9..308d8ed 100644
--- a/DirectCuts/DirectCutPageUC.xaml
+++ b/DirectCuts/DirectCutPageUC.xaml
@@ -94,7 +94,10 @@
          <Grid.ColumnDefinitions>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="8*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="5*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -108,8 +111,26 @@
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-         
-         <Button Name="ManualModeBtn" Grid.Column="4"
+          
+          <!--Comando asse X-Y-->
+          <ToggleButton Name="XYBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+         </ToggleButton>
+          
+          <!--Comando asse Z-->
+          <ToggleButton Name="ZBtn" Grid.Column="3"   
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+          </ToggleButton>
+
+          <!--Comando asse B-C-->
+          <ToggleButton Name="BCBtn" Grid.Column="4"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
+          </ToggleButton>
+
+            <Button Name="ManualModeBtn" Grid.Column="7"
                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
diff --git a/DirectCuts/DirectCutPageUC.xaml.vb b/DirectCuts/DirectCutPageUC.xaml.vb
index a8db894..a793caa 100644
--- a/DirectCuts/DirectCutPageUC.xaml.vb
+++ b/DirectCuts/DirectCutPageUC.xaml.vb
@@ -36,6 +36,9 @@ Public Class DirectCutPageUC
    ' Indica che la finestra del talio Singolo deve essere di tipo manuale
    Friend m_bManulaCut As Boolean = False
 
+   ' elenco dei nuovi bottoni
+   Private m_ButtonAxesList As New List(Of MachineButton)
+
    Enum DirectCutPages
       DirectCut
       ManualAxesMove
@@ -70,7 +73,7 @@ Public Class DirectCutPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 3)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 6)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
       If m_bManulaCut Then
          m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
@@ -86,12 +89,15 @@ Public Class DirectCutPageUC
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
+      Dim bCollpsedNewBottonsConsole As Boolean = False
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
+         ' per le configurazioni diverse dalla Digitale5
+         bCollpsedNewBottonsConsole = True
       End If
 
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
@@ -106,11 +112,60 @@ Public Class DirectCutPageUC
       FlatteningCutBtn.Content = EgtMsg( 90206)
       PolishingBtn.Content = EgtMsg( 90231)
       CopyTemplateBtn.Content = EgtMsg( 90209)
-      SawTestBtn.Content = EgtMsg( 90207)
+      SawTestBtn.Content = EgtMsg(90207)
+
+      ' nuovi bottoni 20/05/2021
+      If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollpsedNewBottonsConsole Then
+         XYBtn.Content = "X - Y"
+         ZBtn.Content = "Z"
+         BCBtn.Content = "B - C"
+      Else
+         XYBtn.Visibility = Windows.Visibility.Collapsed
+         ZBtn.Visibility = Windows.Visibility.Collapsed
+         BCBtn.Visibility = Windows.Visibility.Collapsed
+      End If
+
    End Sub
 
    Private Sub DirectCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      '------ NUOVI BOTTONI ----------
+      ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
+      m_ButtonAxesList.Clear()
+      Dim m_nCount As Integer = 1
+      Dim bFoundBtn As Boolean = True
+      While bFoundBtn
+         Dim sNameBtn As String = K_BUTTON & (m_nCount).ToString()
+         Dim sMachineButtonType As String = String.Empty
+         Dim sTImageName As String = String.Empty
+         Dim sTLuaScriptName As String = String.Empty
+         Dim sFImageName As String = String.Empty
+         Dim sFLuaScriptName As String = String.Empty
+         Dim sStateFlag As String = String.Empty
+         bFoundBtn = m_ControlsMachineButton.GetPrivateProfileMachineButtons("AxesButtons", sNameBtn, sMachineButtonType, sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag, m_MainWindow.GetMachIniFile())
+         If bFoundBtn Then
+            m_nCount += 1
+            Dim ButtonToAdd As MachineButton = Nothing
+            ' la selezione dei comandi si trova nella pagina m_ControlsMachineButton.MachineButtonType (tipo Enum)
+            Select Case sMachineButtonType
+               Case 1
+                  ButtonToAdd = New NoStateButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 2
+                  ButtonToAdd = New TwoStateButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 3
+                  ButtonToAdd = New ThreeStateButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 4
+                  ButtonToAdd = New DoubleCommandButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 5
+                  ButtonToAdd = New PressedCommandButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+            End Select
+            If Not IsNothing(ButtonToAdd) Then
+               m_ButtonAxesList.Add(ButtonToAdd)
+            End If
+         End If
+      End While
+      ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
 
+      '-----------NUOVI BOTTONI------------
       ' Se rientro da simulazione
       If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
          LeftButtonGrid.Children.Add(m_SingleCut)
@@ -152,7 +207,7 @@ Public Class DirectCutPageUC
       MultipleCutBtn.IsEnabled = bRawOk
       GridCutBtn.IsEnabled = bRawOk
       FlatteningCutBtn.IsEnabled = bRawOk
-      PolishingBtn.IsEnabled = ( bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
+      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
       SawTestBtn.IsEnabled = bRawOk
 
       ' Nascondo i pezzi in parcheggio
@@ -258,6 +313,68 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
+   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
+      Dim XYAxesButton As MachineButton = m_ButtonAxesList(0)
+      ' eseguo lo script lua associato
+      XYAxesButton.ExecuteMDICommand(XYAxesButton.TLuaScriptName)
+      ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
+   End Sub
+
+   Friend Sub XYAxesChanged(bXYAxes As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim XYAxesButton As TwoStateButton = Nothing
+      For Each MachineButton In m_ButtonAxesList
+         If MachineButton.StateFlag = "XYAxes" Then
+            XYAxesButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(XYAxesButton) Then
+         XYAxesButton.SetIsChecked(bXYAxes)
+         XYBtn.IsChecked = bXYAxes
+      End If
+   End Sub
+
+   Private Sub ZBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBtn.Click
+      Dim ZAxesButton As MachineButton = m_ButtonAxesList(1)
+      ' eseguo lo script lua associato
+      ZAxesButton.ExecuteMDICommand(ZAxesButton.TLuaScriptName)
+   End Sub
+
+   Friend Sub ZAxesChanged(bZAxes As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ZAxesButton As TwoStateButton = Nothing
+      For Each MachineButton In m_ButtonAxesList
+         If MachineButton.StateFlag = "ZAxes" Then
+            ZAxesButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(ZAxesButton) Then
+         ZAxesButton.SetIsChecked(bZAxes)
+         ZBtn.IsChecked = bZAxes
+      End If
+   End Sub
+
+   Private Sub BCBtn_Click(sender As Object, e As RoutedEventArgs) Handles BCBtn.Click
+      Dim BCAxesButton As MachineButton = m_ButtonAxesList(2)
+      ' eseguo lo script lua associato
+      BCAxesButton.ExecuteMDICommand(BCAxesButton.TLuaScriptName)
+   End Sub
+
+   Friend Sub BCAxesChanged(bBCAxes As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim BCAxesButton As TwoStateButton = Nothing
+      For Each MachineButton In m_ButtonAxesList
+         If MachineButton.StateFlag = "BCAxes" Then
+            BCAxesButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(BCAxesButton) Then
+         BCAxesButton.SetIsChecked(bBCAxes)
+         BCBtn.IsChecked = bBCAxes
+      End If
+   End Sub
+   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
          ' aggiorno lo stato
diff --git a/DirectCuts/MachineButtonsUC.xaml.vb b/DirectCuts/MachineButtonsUC.xaml.vb
index 4cf0640..59a1fab 100644
--- a/DirectCuts/MachineButtonsUC.xaml.vb
+++ b/DirectCuts/MachineButtonsUC.xaml.vb
@@ -71,7 +71,7 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
-      ' Se variabile di stato "Nothing" imposto immagine fissa
+      ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
             StateFlagArray(nIndex) = BTN_STATE_DOOR_OPENED OrElse
@@ -97,19 +97,21 @@ Public Class MachineButtonsUC
       If Not m_MainWindow.m_bNCLink Then
          For nIndex As Integer = 0 To m_nCount - 1
             Dim sImage As String = If(String.IsNullOrEmpty(ImageArrayN(nIndex)), ImageArrayY(nIndex), ImageArrayN(nIndex))
-            Try
-               Dim s As String
-               If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
-                  s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & sImage
-               Else
-                  s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & sImage
-               End If
-               'Dim s As String = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & sImage
-               Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
-               GetImage(nIndex + 1).Source = sButtonImageSource
-            Catch ex As Exception
-               EgtOutLog("Error loading image " & sImage)
-            End Try
+            If Not String.IsNullOrEmpty(sImage) Then
+               Try
+                  Dim s As String
+                  If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+                     s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & sImage
+                  Else
+                     s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & sImage
+                  End If
+                  'Dim s As String = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & sImage
+                  Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+                  GetImage(nIndex + 1).Source = sButtonImageSource
+               Catch ex As Exception
+                  EgtOutLog("Error loading image " & sImage)
+               End Try
+            End If
          Next
       End If
 
@@ -562,6 +564,32 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
+   Friend Sub XYAxesChanged(ByVal bXYAxes As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, "XYAxes")
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bXYAxes
+   End Sub
+
+   Friend Sub ZAxesChanged(ByVal bZAxes As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, "ZAxes")
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bZAxes
+   End Sub
+
+   Friend Sub BCAxesChanged(ByVal bBCAxes As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, "BCAxes")
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bBCAxes
+   End Sub
+   '-----------------------------------------------------------------------------------------------------------------
+
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton
       Select Case nIndex
       Case 1
diff --git a/DrawImport/CompoDimensionUC.xaml.vb b/DrawImport/CompoDimensionUC.xaml.vb
index a186482..877ae92 100644
--- a/DrawImport/CompoDimensionUC.xaml.vb
+++ b/DrawImport/CompoDimensionUC.xaml.vb
@@ -76,7 +76,7 @@ Public Class CompoDimensionUC
          AddBtn.Visibility = Windows.Visibility.Visible
          CancelBtn.Visibility = Windows.Visibility.Visible
       Else
-         m_DrawPage.SideAngleBtn.IsEnabled = True
+         m_DrawPage.SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          m_DrawPage.FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
          m_DrawPage.EngraveBtn.IsEnabled = True
          m_DrawPage.DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
diff --git a/DrawImport/DrawPageUC.xaml.vb b/DrawImport/DrawPageUC.xaml.vb
index d5bc694..a6b3c9f 100644
--- a/DrawImport/DrawPageUC.xaml.vb
+++ b/DrawImport/DrawPageUC.xaml.vb
@@ -55,6 +55,16 @@ Public Class DrawPageUC
    Private m_sCsvList As String = ""
    Private m_sCsvName As String = ""
 
+   ' Abilito i tagli inclinati solo per macchina a 5 assi
+   Private m_bEnableSideAngle As Boolean = True
+
+   Friend ReadOnly Property bEnableSideAngle As Boolean
+      Get
+         Return m_bEnableSideAngle
+      End Get
+   End Property
+
+
    Friend ReadOnly Property sCompoName As String
       Get
          Return m_sCompoName
@@ -143,7 +153,13 @@ Public Class DrawPageUC
       m_bTrfData = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.TRF_IMPORT) And
                    (GetPrivateProfileInt(S_COMPO, K_TRFDATA, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Abilitazione CsvData
-      m_bCsvData = ( Not m_bTrfData And GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bCsvData = (Not m_bTrfData And GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+
+      ' Abilitazione tagli inclinati (solo per macchine a 5 assi)
+      m_bEnableSideAngle = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile()) > 4
+      If Not m_bEnableSideAngle Then
+         SideAngleBtn.IsEnabled = False
+      End If
 
       If m_bTrfData Then
          PartNameTxBl.Visibility = Windows.Visibility.Hidden
@@ -997,7 +1013,7 @@ Public Class DrawPageUC
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
             LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
-         SideAngleBtn.IsEnabled = True
+         SideAngleBtn.IsEnabled = m_bEnableSideAngle
          DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
          MessageGrid.Visibility = Windows.Visibility.Visible
@@ -1055,7 +1071,7 @@ Public Class DrawPageUC
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
             LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
-         SideAngleBtn.IsEnabled = True
+         SideAngleBtn.IsEnabled = m_bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
          EngraveBtn.IsEnabled = True
          MessageGrid.Visibility = Windows.Visibility.Visible
@@ -1107,7 +1123,7 @@ Public Class DrawPageUC
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
             LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
          End If
-         SideAngleBtn.IsEnabled = True
+         SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True
          DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
diff --git a/DrawImport/ImportPageUC.xaml.vb b/DrawImport/ImportPageUC.xaml.vb
index c7090bb..40527ba 100644
--- a/DrawImport/ImportPageUC.xaml.vb
+++ b/DrawImport/ImportPageUC.xaml.vb
@@ -598,7 +598,7 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = True
       OkBtn.IsEnabled = True
       ' abilito bottone angoli su lati esterni
-      SideAngleBtn.IsEnabled = True
+      SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
       DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
@@ -628,7 +628,7 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = True
       OkBtn.IsEnabled = True
       ' abilito bottone angoli su lati esterni
-      SideAngleBtn.IsEnabled = True
+      SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
       DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
@@ -658,7 +658,7 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = True
       OkBtn.IsEnabled = True
       ' abilito bottone angoli su lati esterni
-      SideAngleBtn.IsEnabled = True
+      SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
       DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
@@ -1021,7 +1021,7 @@ Public Class ImportPageUC
          m_nSelectedLayer = GDB_ID.NULL
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
-         SideAngleBtn.IsEnabled = True
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
@@ -1071,7 +1071,7 @@ Public Class ImportPageUC
          m_nSelectedLayer = GDB_ID.NULL
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
-         SideAngleBtn.IsEnabled = True
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
          DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
@@ -1119,7 +1119,7 @@ Public Class ImportPageUC
          m_nSelectedLayer = GDB_ID.NULL
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
-         SideAngleBtn.IsEnabled = True
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
diff --git a/DrawImport/InternalComponentPageUC.xaml.vb b/DrawImport/InternalComponentPageUC.xaml.vb
index 0e99a15..6ac6312 100644
--- a/DrawImport/InternalComponentPageUC.xaml.vb
+++ b/DrawImport/InternalComponentPageUC.xaml.vb
@@ -31,7 +31,7 @@ Public Class InternalComponentPageUC
       End If
       m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.InternalComponent
       ' Abilito bottoni angoli di fianco e lavorazioni da sotto
-      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = True
+      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = True
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
@@ -181,7 +181,7 @@ Public Class InternalComponentPageUC
          m_MainWindow.m_DrawPageUC.FiloTopBtn.IsChecked = False
          m_MainWindow.m_DrawPageUC.EngraveBtn.IsChecked = False
          m_MainWindow.m_DrawPageUC.DripCutBtn.IsChecked = False
-         m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = True
+         m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
          m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = True
          m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
diff --git a/DrawImport/MainComponentPageUC.xaml.vb b/DrawImport/MainComponentPageUC.xaml.vb
index 9e0eff3..5ae8317 100644
--- a/DrawImport/MainComponentPageUC.xaml.vb
+++ b/DrawImport/MainComponentPageUC.xaml.vb
@@ -190,7 +190,7 @@ Public Class MainComponentPageUC
          m_MainWindow.m_DrawPageUC.FiloTopBtn.IsChecked = False
          m_MainWindow.m_DrawPageUC.EngraveBtn.IsChecked = False
          m_MainWindow.m_DrawPageUC.DripCutBtn.IsChecked = False
-         m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = True
+         m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
          m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = True
          m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
diff --git a/DrawImport/SecondaryComponentPageUC.xaml.vb b/DrawImport/SecondaryComponentPageUC.xaml.vb
index a541cc0..e20c999 100644
--- a/DrawImport/SecondaryComponentPageUC.xaml.vb
+++ b/DrawImport/SecondaryComponentPageUC.xaml.vb
@@ -226,7 +226,7 @@ Public Class SecondaryComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsChecked = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsChecked = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsChecked = False
-      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = True
+      m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = True
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
diff --git a/Machine/MachineCNPageUC.xaml b/Machine/MachineCNPageUC.xaml
index 96de89e..045b31c 100644
--- a/Machine/MachineCNPageUC.xaml
+++ b/Machine/MachineCNPageUC.xaml
@@ -49,7 +49,7 @@
 
          </GroupBox>
 
-            <GroupBox Name="CommandsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
+         <GroupBox Name="CommandsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
             <Grid>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
@@ -82,7 +82,7 @@
 
          </GroupBox>
 
-            <GroupBox Name="PartProgTransferGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
+         <GroupBox Name="PartProgTransferGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
             Grid.ColumnSpan="3">
             <Grid>
             <Grid.ColumnDefinitions>
@@ -107,6 +107,22 @@
             </Grid>
          </GroupBox>
 
+            <GroupBox Name="PowerGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
+            Grid.Column="3" Grid.ColumnSpan="3" Margin="5,0,0,0">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <!--PowerON-->
+                    <Button Name="PowerONBtn" Grid.Column="0"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+                    <!--PowerOFF-->
+                    <Button Name="PowerOFFBtn" Grid.Column="1"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+                </Grid>
+            </GroupBox>
+
             <GroupBox Name="ErrorLstGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="3" Grid.ColumnSpan="4">
             <ListBox Name="ErrorLstBx">
                <ListBox.ItemTemplate>
diff --git a/Machine/MachineCNPageUC.xaml.vb b/Machine/MachineCNPageUC.xaml.vb
index 8e9b6ad..fd32cf1 100644
--- a/Machine/MachineCNPageUC.xaml.vb
+++ b/Machine/MachineCNPageUC.xaml.vb
@@ -6,6 +6,7 @@ Public Class MachineCNPageUC
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
+   Private m_ButtonPower As New List(Of MachineButton)
 
    Private Sub TestingPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       StartBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 1)
@@ -32,6 +33,15 @@ Public Class MachineCNPageUC
       Else
          PartProgTransferGpBx.Visibility = Windows.Visibility.Hidden
       End If
+
+      ' nuovi pulsanti
+      If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+         PowerONBtn.Content = "ON"
+         PowerOFFBtn.Content = "OFF"
+         PowerGpBx.Header = "Power"
+      Else
+         PowerGpBx.Visibility = Visibility.Collapsed
+      End If
    End Sub
 
    Private Sub TestingPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -40,6 +50,46 @@ Public Class MachineCNPageUC
          SingleBtn.Visibility = Visibility.Collapsed
          PartProgTransferGpBx.Visibility = Windows.Visibility.Hidden
       End If
+
+      '------ NUOVI BOTTONI ----------
+      ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
+      m_ButtonPower.Clear()
+      Dim m_nCount As Integer = 1
+      Dim bFoundBtn As Boolean = True
+      While bFoundBtn
+         Dim sNameBtn As String = K_BUTTON & (m_nCount).ToString()
+         Dim sMachineButtonType As String = String.Empty
+         Dim sTImageName As String = String.Empty
+         Dim sTLuaScriptName As String = String.Empty
+         Dim sFImageName As String = String.Empty
+         Dim sFLuaScriptName As String = String.Empty
+         Dim sStateFlag As String = String.Empty
+         bFoundBtn = m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.GetPrivateProfileMachineButtons("MachineButtons", sNameBtn, sMachineButtonType, sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag, m_MainWindow.GetMachIniFile())
+         If bFoundBtn Then
+            m_nCount += 1
+            Dim ButtonToAdd As MachineButton = Nothing
+            ' la selezione dei comandi si trova nella pagina m_ControlsMachineButton.MachineButtonType (tipo Enum)
+            Select Case sMachineButtonType
+               Case 1
+                  ButtonToAdd = New NoStateButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 2
+                  ButtonToAdd = New TwoStateButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 3
+                  ButtonToAdd = New ThreeStateButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 4
+                  ButtonToAdd = New DoubleCommandButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+               Case 5
+                  ButtonToAdd = New PressedCommandButton(sTImageName, sTLuaScriptName, sFImageName, sFLuaScriptName, sStateFlag)
+            End Select
+            If Not IsNothing(ButtonToAdd) Then
+               m_ButtonPower.Add(ButtonToAdd)
+            End If
+         End If
+      End While
+      ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
+
+      '-----------NUOVI BOTTONI------------
+
    End Sub
 
    Private Sub StartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StartBtn.Click
@@ -178,4 +228,32 @@ Public Class MachineCNPageUC
       MDITxBx.Background = Brushes.LightGray
    End Sub
 
+   Private Sub PowerON_Click(sender As Object, e As RoutedEventArgs) Handles PowerONBtn.Click
+      Dim PowerOnButton As MachineButton = m_ButtonPower(0)
+      ' eseguo lo script lua associato
+      PowerOnButton.ExecuteMDICommand(PowerOnButton.TLuaScriptName)
+      ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
+   End Sub
+
+   Private Sub PowerOFF_Click(sender As Object, e As RoutedEventArgs) Handles PowerOFFBtn.Click
+      Dim PowerOffButton As MachineButton = m_ButtonPower(1)
+      ' eseguo lo script lua associato
+      PowerOffButton.ExecuteMDICommand(PowerOffButton.TLuaScriptName)
+      ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
+   End Sub
+
+   Friend Sub PowerONChanged(bPowerON As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim PowerONButton As TwoStateButton = Nothing
+      For Each MachineButton In m_ButtonPower
+         If MachineButton.StateFlag = "ZAxes" Then
+            PowerONButton = MachineButton
+         End If
+      Next
+      'If Not IsNothing(PowerONButton) Then
+      '   PowerONButton.SetIsChecked(bZAxes)
+      '   PowerONBtn.IsChecked = bZAxes
+      'End If
+   End Sub
+
 End Class
diff --git a/MainWindow.xaml.vb b/MainWindow.xaml.vb
index 9a855c2..e005941 100644
--- a/MainWindow.xaml.vb
+++ b/MainWindow.xaml.vb
@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2304, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2304, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2305, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2305, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -1096,7 +1096,7 @@ Class MainWindow
       End If
 
       ' seleziono il tipo di avvio
-      m_CurrentProjectPageUC.StartProgram()
+      'm_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
       EgtDraw()
    End Sub
diff --git a/My Project/AssemblyInfo.vb b/My Project/AssemblyInfo.vb
index 99fe41c..8b56c10 100644
--- a/My Project/AssemblyInfo.vb	
+++ b/My Project/AssemblyInfo.vb	
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.4.3")>
-<Assembly: AssemblyFileVersion("2.3.4.3")>
+<Assembly: AssemblyVersion("2.3.5.1")>
+<Assembly: AssemblyFileVersion("2.3.5.1")>
diff --git a/NcComm/CNCommunication.vb b/NcComm/CNCommunication.vb
index 5c47f03..921b3aa 100644
--- a/NcComm/CNCommunication.vb
+++ b/NcComm/CNCommunication.vb
@@ -30,6 +30,8 @@ Public Class CNCommunication
    Private m_bNewVarData As Boolean = False
    Private m_bTimerBusy As Boolean = False
 
+   Private m_IsNewConsole As Boolean = False
+
    ' Lista errori
    Friend ErrorList As New ObservableCollection(Of String)
 
@@ -323,6 +325,19 @@ Public Class CNCommunication
          GetPrivateProfileString(S_NCDATA, K_BYPASSTATE, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
 
+         ' nuove variabili
+         m_IsNewConsole = GetPrivateProfileString(S_NCDATA, K_NEWCONSOLE, "", sVal, m_MainWindow.GetMachIniFile())
+         If m_IsNewConsole Then
+            GetPrivateProfileString(S_NCDATA, K_XYAXES, "", sVal, m_MainWindow.GetMachIniFile())
+            m_CN.SetCnDataVar(CN_generico.CnData.XYAxes, sVal)
+            GetPrivateProfileString(S_NCDATA, K_ZAXES, "", sVal, m_MainWindow.GetMachIniFile())
+            m_CN.SetCnDataVar(CN_generico.CnData.ZAxes, sVal)
+            GetPrivateProfileString(S_NCDATA, K_BCAxes, "", sVal, m_MainWindow.GetMachIniFile())
+            m_CN.SetCnDataVar(CN_generico.CnData.BCAxes, sVal)
+            GetPrivateProfileString(S_NCDATA, K_POWERON, "", sVal, m_MainWindow.GetMachIniFile())
+            m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+         End If
+
          ' Inizializzo la comunicazione
          m_CN.Init()
 
@@ -537,6 +552,13 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BypassChanged(m_CN.bBypassState)
+
+            ' Nuovi bottoni (uso joystick)
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.XYAxesChanged(m_CN.bXYAxes)
+               m_MainWindow.m_DirectCutPageUC.ZAxesChanged(m_CN.bZAxes)
+               m_MainWindow.m_DirectCutPageUC.BCAxesChanged(m_CN.bBCAxes)
+            End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -550,6 +572,14 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
             End If
             m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+
+            ' Nuovi bottoni (uso joystick) per Area4
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYAxesChanged(m_CN.bXYAxes)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZAxesChanged(m_CN.bZAxes)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCAxesChanged(m_CN.bBCAxes)
+            End If
+
          End If
       End If
 
@@ -557,6 +587,11 @@ Public Class CNCommunication
          m_MainWindow.m_RawPartPage.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
       End If
 
+      ' Nuove bottoni (Power Macchina)
+      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+      End If
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
diff --git a/NcComm/CN_generico.vb b/NcComm/CN_generico.vb
index d2e8c6f..86fd485 100644
--- a/NcComm/CN_generico.vb
+++ b/NcComm/CN_generico.vb
@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 47                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 50                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -60,6 +60,11 @@ Public MustInherit Class CN_generico
       Vacuum90 = 44
       VacuumOff = 45
       LaserTrac = 46
+
+      XYAxes = 47
+      ZAxes = 48
+      BCAxes = 49
+      PowerON = 50
    End Enum
 
 #End Region
@@ -194,6 +199,14 @@ Public MustInherit Class CN_generico
    Public bFeedHold As Boolean
    Public bSpeedHold As Boolean
 
+   ' Nuovi di bottoni -------------------------------------------
+   Public bXYAxes As Boolean
+   Public bZAxes As Boolean
+   Public bBCAxes As Boolean
+
+   Public bPowerON As Boolean
+   ' Nuovi di bottoni -------------------------------------------
+
    Public nMachineMode As Integer
 
    Public m_szCnDataVar(NUM_DATA - 1) As String
diff --git a/NcComm/M_Num.vb b/NcComm/M_Num.vb
index e0bb919..5faf889 100644
--- a/NcComm/M_Num.vb
+++ b/NcComm/M_Num.vb
@@ -1076,6 +1076,16 @@ Namespace Num
                   bVacuum90 = CBool(values(n))
                Case CnData.VacuumOff     ' (45) Stato aspirazione ventose spento
                   bVacuumOff = CBool(values(n))
+
+               Case CnData.XYAxes     ' (46) 
+                  bXYAxes = CBool(values(n))
+               Case CnData.ZAxes     ' (47)
+                  bZAxes = CBool(values(n))
+               Case CnData.BCAxes     ' (48)
+                  bBCAxes = CBool(values(n))
+               Case CnData.PowerON     ' (49)
+                  bPowerON = CBool(values(n))
+
             End Select
          Next
 
diff --git a/Project/CurrentProjectPageUC.xaml.vb b/Project/CurrentProjectPageUC.xaml.vb
index ecc9de6..6daa78e 100644
--- a/Project/CurrentProjectPageUC.xaml.vb
+++ b/Project/CurrentProjectPageUC.xaml.vb
@@ -180,21 +180,21 @@ Public Class CurrentProjectPageUC
 
          ' Se richiesto, carico ultimo progetto
          Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-         'If bAutoLoadLast Then
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
-         '   If Not LoadProject(sPath, False) Then
-         '      NewProject()
-         '   End If
-         '   EgtResetModified()
-         '   Altrimenti ne imposto uno nuovo
-         'Else
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   NewProject()
-         'End If
+         If bAutoLoadLast Then
+            m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
+            Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
+            If Not LoadProject(sPath, False) Then
+               NewProject()
+            End If
+            EgtResetModified()
+            'Altrimenti ne imposto uno nuovo
+         Else
+            m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
+            NewProject()
+         End If
 
-         ' creo nuovo progetto
-         NewProject()
+         '' creo nuovo progetto
+         'NewProject()
 
          ' Nascondo progress per fotografia
          PhotoProgress.Visibility = Windows.Visibility.Hidden
diff --git a/Project/ProjectMgrUC.xaml.vb b/Project/ProjectMgrUC.xaml.vb
index 4e5dde2..bf82ecd 100644
--- a/Project/ProjectMgrUC.xaml.vb
+++ b/Project/ProjectMgrUC.xaml.vb
@@ -314,9 +314,18 @@ Public Class ProjectMgrUC
          Dim dX, dY, dZ As Double
          EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
 
+         ' verifica assi lineari
+         EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
+         If nStat <> 0 Then
+            vtDirT.Rotate(Vector3d.Z_AX, 180)
+            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
+            EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
+         End If
+
          '--------------------------- Comunico i movimenti in origine macchina al CN ----------------------------------------
 
-         ExecuteComandCNC(ptMid, dC1, dB1)
+         ExecuteCommandCNC(ptMid, dC1, dB1)
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
@@ -606,7 +615,7 @@ Public Class ProjectMgrUC
    End Sub
 
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
-   Private Sub ExecuteComandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
+   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 
       'If m_CurrNcComm.m_nNCType = 3 AndAlso m_CurrNcComm.m_CN.m_IsSiemensOne Then
       '   SiemensMoveAxis(ptMid, dAngC, dAngB)
@@ -616,7 +625,9 @@ Public Class ProjectMgrUC
       Dim nTemp As Integer = 0
       Dim dTemp As Double = 0
       Dim CmdString As String = String.Empty
-      EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua")
+      If Not EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
+         Return
+      End If
 
       '----------- DATI MOVIMENTO -----------
       ' imposto avanzamneto in rapido (non deve essere impostata feed e speed)
@@ -692,7 +703,7 @@ Public Class ProjectMgrUC
 
       ' Reset lua
       EgtLuaResetGlobVar("CMD")
-      ' Modifico stringa per inserire i newline
+      ' Modifico stringa per inserire i newline ( in questo caso non c'è bisogno perchè tutto sulla stessa linea)
       CmdString = CmdString.Replace("<br/>", Environment.NewLine)
       ' Creo file...
       Dim FilePath As String = m_MainWindow.GetCncDir() & "\TestWork" & m_MainWindow.m_CurrentMachine.sIsoFileExt
@@ -811,13 +822,15 @@ Public Class ProjectMgrUC
    Private Sub TestBtn_Click(sender As Object, e As RoutedEventArgs) Handles TestBtn.Click
       If TestBtn.IsChecked Then
          m_CurrProjPage.m_bSelectCurv = True
+         ' deseleziono tutto
+         EgtDeselectAll()
       Else
          m_CurrProjPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
-         ' aggiorno il disegno
-         EgtDraw()
+         EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If
-
+      ' aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Private Sub VeinMatchingBtn_Click(sender As Object, e As RoutedEventArgs) Handles VeinMatchingBtn.Click