diff --git a/AlarmsPageUC.xaml b/AlarmsPageUC.xaml
index de21fc2..2e7acd7 100644
--- a/AlarmsPageUC.xaml
+++ b/AlarmsPageUC.xaml
@@ -182,17 +182,6 @@
                <RowDefinition Height="4*"/>
             </Grid.RowDefinitions>
 
-            <GroupBox Name="ErrorLstGpBx" Style="{StaticResource OmagCut_GroupBox}" Grid.Row="1">
-               <ListBox Name="ErrorLstBx">
-                  <ListBox.ItemTemplate>
-                     <DataTemplate>
-                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                     </DataTemplate>
-                  </ListBox.ItemTemplate>
-               </ListBox>
-
-            </GroupBox>
-
          </Grid>
 
          <Grid Grid.Column="2">
diff --git a/AlarmsPageUC.xaml.vb b/AlarmsPageUC.xaml.vb
index 0f991cb..b8c0572 100644
--- a/AlarmsPageUC.xaml.vb
+++ b/AlarmsPageUC.xaml.vb
@@ -44,7 +44,6 @@ Public Class AlarmsPageUC
       AngleCutExtraLenTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 7)
       CompleteCutsTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 8)
       SafeZTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 5)
-      ErrorLstGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 12)
       MaterialsGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 13)
       NewMatBtn.Content = EgtMsg(MSG_ALARMSPAGEUC + 14)
       RemoveMatBtn.Content = EgtMsg(MSG_ALARMSPAGEUC + 15)
diff --git a/CNCommunication.vb b/CNCommunication.vb
index 3b9f173..e304901 100644
--- a/CNCommunication.vb
+++ b/CNCommunication.vb
@@ -187,7 +187,7 @@ Public Class CNCommunication
       ' Assegno riferimento al CN alle diverse pagine
       m_MainWindow.m_MachineStatusUC.m_CN = Me.m_CN
       m_MainWindow.m_MachinePageUC.m_AlarmsPageUC.m_CN = Me.m_CN
-      m_MainWindow.m_MachinePageUC.m_TestingPage.m_CN = Me.m_CN
+      m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.m_CN = Me.m_CN
       m_MainWindow.m_DirectCutPageUC.m_MachineButtons.m_CN = Me.m_CN
       m_MainWindow.m_DirectCutPageUC.m_ManualAxesMove.m_CN = Me.m_CN
       m_MainWindow.m_DirectCutPageUC.m_CN = Me.m_CN
@@ -271,7 +271,7 @@ Public Class CNCommunication
             For Each Item In m_CN.sz_NC_error_messages
                ErrorList.Add(Item)
             Next
-            m_AlarmsPage.ErrorLstBx.ItemsSource = ErrorList
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.ErrorLstBx.ItemsSource = ErrorList
          End If
          m_CN.b_NC_error = False
          m_AlarmsPage.NcError()
diff --git a/CadCutPageUC.xaml.vb b/CadCutPageUC.xaml.vb
index d5ff571..425d50f 100644
--- a/CadCutPageUC.xaml.vb
+++ b/CadCutPageUC.xaml.vb
@@ -79,6 +79,7 @@ Public Class CadCutPageUC
       Else
          m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
          m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_PhotoPage)
+         m_MainWindow.m_ActivePage = MainWindow.Pages.Photo
       End If
    End Sub
 
diff --git a/ConstMsg.vb b/ConstMsg.vb
index a16e108..b2766c4 100644
--- a/ConstMsg.vb
+++ b/ConstMsg.vb
@@ -25,6 +25,7 @@
    Public Const MSG_MACHININGSDBPAGEUC As Integer = MSG_OMAGCUT + 760
    Public Const MSG_COMBOBOXPARAM As Integer = MSG_OMAGCUT + 800
    Public Const MSG_ALARMSPAGEUC As Integer = MSG_OMAGCUT + 900
+   Public Const MSG_MACHINECNPAGEUC As Integer = MSG_OMAGCUT + 930
    Public Const MSG_OPTIONSPAGEUC As Integer = MSG_OMAGCUT + 950
    Public Const MSG_EGTMSGBOX As Integer = MSG_OMAGCUT + 1100
 
diff --git a/DrawPageUC.xaml.vb b/DrawPageUC.xaml.vb
index 3b4e6c9..64bbcef 100644
--- a/DrawPageUC.xaml.vb
+++ b/DrawPageUC.xaml.vb
@@ -357,16 +357,25 @@ Public Class DrawPageUC
          ' Ne recupero l'Id
          Dim nId2 As Integer = EgtGetLastPart()
          ' Ne recupero il layer OutLoop
-         Dim nOutLoopLayer As Integer = EgtGetFirstNameInGroup(nId2, "OutLoop")
+         Dim nOutLoopLayer As Integer = EgtGetFirstNameInGroup(nId2, SideAngleUC.OUTLOOP_LAYER)
+         ' Calcolo dimensione ingombro OutLoop
+         Dim ptMin, ptMax As Point3d
+         EgtGetBBoxGlob(nOutLoopLayer, GDB_BB.STANDARD, ptMin, ptMax)
+         Dim dBBoxRad As Double = 0.5 * Point3d.DistXY(ptMin, ptMax)
+         ' Creo layer per testi nesting
+         Dim TextLayer As Integer = EgtCreateGroup(nId2)
+         EgtSetName(TextLayer, SideAngleUC.NEST_SIDE_ANGLE_LAYER)
          ' Modifico inclinazione lati
          For Each Entity In m_SideAngle.m_SideAngleEntityList
             Dim nCurrEntityName As Integer = EgtGetFirstNameInGroup(nOutLoopLayer, Entity.sEntityName)
-            If Entity.dSideAngle <> 0 Then
+            If Math.Abs(Entity.dSideAngle) > EPS_ANG_SMALL Then
                ' Scrivo nuovo angolo nelle info
-               EgtSetInfo(nCurrEntityName, "SideAng", Entity.dSideAngle)
+               EgtSetInfo(nCurrEntityName, SideAngleUC.SIDE_ANGLE_INFO, Entity.dSideAngle)
+               ' Creo testo con angolo di inclinazione per nesting
+               SideAngleUC.AddTextToLine(Entity.dSideAngle & "°", TextLayer, nCurrEntityName, 10, dBBoxRad, False)
             Else
                ' Cancello inclinazione nell'apposito campo info
-               EgtRemoveInfo(nCurrEntityName, "SideAng")
+               EgtRemoveInfo(nCurrEntityName, SideAngleUC.SIDE_ANGLE_INFO)
             End If
          Next
          ' Muovo la regione in Z per evitare problemi in visualizzazione
diff --git a/ImportPageUC.xaml.vb b/ImportPageUC.xaml.vb
index 13d788c..af892df 100644
--- a/ImportPageUC.xaml.vb
+++ b/ImportPageUC.xaml.vb
@@ -444,6 +444,11 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      ' Ricavo nome pezzo selezionato per cancellarne i testi
+      Dim Part1 As Integer = m_MainWindow.m_ImportPageUC.m_nSelectedPart
+      EgtErase(EgtGetFirstNameInGroup(Part1, SideAngleUC.SIDE_ANGLE_LAYER))
+      ' Scrivo testi per nesting
+      m_SideAngleUC.WriteSideAngleForNest()
       ' Vettore nomi file temporanei
       Dim sTmpFiles As New ArrayList()
       ' Ciclo di salvataggio dei pezzi
@@ -520,11 +525,9 @@ Public Class ImportPageUC
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
-         ' Ricavo nome primo pezzo
-         Dim Part1 As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
-         ' Ricavo nome pezzo precedentemente selezionato
-         Part1 = m_MainWindow.m_ImportPageUC.m_nSelectedPart
-         EgtErase(EgtGetFirstNameInGroup(Part1, "SideAngle"))
+         ' Ricavo nome pezzo selezionato
+         Dim Part1 As Integer = m_MainWindow.m_ImportPageUC.m_nSelectedPart
+         EgtErase(EgtGetFirstNameInGroup(Part1, SideAngleUC.SIDE_ANGLE_LAYER))
       End If
    End Sub
 
diff --git a/MachineCNPageUC.xaml b/MachineCNPageUC.xaml
new file mode 100644
index 0000000..b698050
--- /dev/null
+++ b/MachineCNPageUC.xaml
@@ -0,0 +1,130 @@
+<UserControl x:Class="MachineCNPageUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   mc:Ignorable="d" 
+   d:DesignHeight="768" d:DesignWidth="1280">
+
+   <!-- Chiamata al Dictionary -->
+   <UserControl.Resources>
+      <ResourceDictionary Source="OmagCutDictionary.xaml"/>
+   </UserControl.Resources>
+
+   <!-- Definizione della ImportPage -->
+   <Border Background="{StaticResource OmagCut_Gray}" >
+
+      <Grid Name="ImportPageGrid">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="7.5*"/>
+            <ColumnDefinition Width="1.5*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="4.5*"/>
+         </Grid.RowDefinitions>
+
+         <GroupBox Name="CNModeGpBx" Style="{StaticResource OmagCut_GroupBox}" Grid.ColumnSpan="2" Margin="0,0,4,0">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1.5*"/>
+                  <ColumnDefinition Width="1.5*"/>
+               </Grid.ColumnDefinitions>
+
+               <Button Name="AutoBtn" Grid.Column="0"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="ManualBtn" Grid.Column="1"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="MDIBtn" Grid.Column="2"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="SingleBtn" Grid.Column="3"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="HomeBtn" Grid.Column="4"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+
+            </Grid>
+
+         </GroupBox>
+
+         <GroupBox Name="CommandsGpBx" Style="{StaticResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+
+               <Button Name="StartBtn" Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="StopBtn" Grid.Column="1"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="ResetBtn" Grid.Column="2"
+                  Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+
+            </Grid>
+
+         </GroupBox>
+
+         <GroupBox Name="MDICommandGpBx" Style="{StaticResource OmagCut_GroupBox}" Grid.Row="1">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="6*"/>
+                  <ColumnDefinition Width="1.5*"/>
+               </Grid.ColumnDefinitions>
+
+               <EgtWPFLib:EgtTextBox Name="MDITxBx" Width="470" Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+               <Button Name="MDIConfirmBtn" Grid.Column="1" 
+               Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+
+            </Grid>
+
+         </GroupBox>
+
+         <GroupBox Name="PartProgTransferGpBx" Style="{StaticResource OmagCut_GroupBox}" Grid.Row="2"
+            Grid.ColumnSpan="3">
+            <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+
+               <Button Name="DownloadBtn" Grid.Column="0"
+               Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="UploadBtn" Grid.Column="1"
+               Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="ActivateBtn" Grid.Column="2"
+               Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="DeleteBtn" Grid.Column="3"
+               Style="{StaticResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <EgtWPFLib:EgtTextBox Name="DULoadTxBx" Grid.Column="4" Width="100" Text="900.0"
+                  Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+
+            </Grid>
+         </GroupBox>
+
+         <GroupBox Name="ErrorLstGpBx" Style="{StaticResource OmagCut_GroupBox}" Grid.Row="3" Grid.ColumnSpan="4">
+            <ListBox Name="ErrorLstBx">
+               <ListBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ListBox.ItemTemplate>
+            </ListBox>
+
+         </GroupBox>
+
+      </Grid>
+
+   </Border>
+
+</UserControl>
diff --git a/TestingPageUC.xaml.vb b/MachineCNPageUC.xaml.vb
similarity index 69%
rename from TestingPageUC.xaml.vb
rename to MachineCNPageUC.xaml.vb
index e1b73ee..8cb190c 100644
--- a/TestingPageUC.xaml.vb
+++ b/MachineCNPageUC.xaml.vb
@@ -1,10 +1,33 @@
-Public Class TestingPageUC
+Imports EgtUILib
+
+Public Class MachineCNPageUC
 
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = Application.Current.MainWindow
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   Private Sub TestingPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      StartBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 1)
+      StopBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 2)
+      ResetBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 3)
+      AutoBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 4)
+      SingleBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 5)
+      MDIBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 6)
+      ManualBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 7)
+      HomeBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 8)
+      DownloadBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 9)
+      UploadBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 10)
+      ActivateBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 11)
+      DeleteBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 12)
+      MDIConfirmBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 13)
+      CNModeGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 14)
+      CommandsGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 15)
+      MDICommandGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 16)
+      PartProgTransferGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 17)
+      ErrorLstGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 12)
+   End Sub
+
    Private Sub TestingPage_Loaded(sender As Object, e As RoutedEventArgs)
       'If m_bFirst Then
 
diff --git a/MachinePageUC.xaml b/MachinePageUC.xaml
index 46fd182..527ff5b 100644
--- a/MachinePageUC.xaml
+++ b/MachinePageUC.xaml
@@ -4,7 +4,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Loaded="MachinePage_Loaded" Initialized="MachinePage_Initialized" Unloaded="MachinePage_Unloaded">
+   d:DesignHeight="853.3" d:DesignWidth="1280">
    
    <!-- Chiamata al Dictionary -->
    <UserControl.Resources>
diff --git a/MachinePageUC.xaml.vb b/MachinePageUC.xaml.vb
index f682c14..ae551fa 100644
--- a/MachinePageUC.xaml.vb
+++ b/MachinePageUC.xaml.vb
@@ -9,7 +9,7 @@ Public Class MachinePageUC
    Friend m_AlarmsPageUC As AlarmsPageUC
    Friend m_ToolsDbPageUC As ToolsDbPageUC
    Friend m_MachiningDbPageUC As MachiningDbPageUC
-   Friend m_TestingPage As TestingPageUC
+   Friend m_MachineCNPageUC As MachineCNPageUC
 
    ' Riferimento alla pagina correntemente attiva
    Friend m_ActiveMachinePage As MachinePages
@@ -18,27 +18,22 @@ Public Class MachinePageUC
       Alarms
       ToolsDb
       MachiningDb
-      Testing
+      MachineCN
    End Enum
 
-   Private Sub MachinePage_Initialized(sender As Object, e As EventArgs)
+   Private Sub MachinePage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
 
       'Creazione delle Page UserControl
       m_AlarmsPageUC = New AlarmsPageUC
       m_ToolsDbPageUC = New ToolsDbPageUC
       m_MachiningDbPageUC = New MachiningDbPageUC
-      m_TestingPage = New TestingPageUC
+      m_MachineCNPageUC = New MachineCNPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_AlarmsPageUC.SetValue(Grid.RowProperty, 1)
       m_ToolsDbPageUC.SetValue(Grid.RowProperty, 1)
       m_MachiningDbPageUC.SetValue(Grid.RowProperty, 1)
-      m_TestingPage.SetValue(Grid.RowProperty, 1)
-
-      'Inizializzazione della pagina di apertura all'apertura della pagina MachinePage
-      MachinePageGrid.Children.Add(m_AlarmsPageUC)
-      AlarmsBtn.IsChecked = True
-      m_ActiveMachinePage = MachinePages.Alarms
+      m_MachineCNPageUC.SetValue(Grid.RowProperty, 1)
 
       AlarmsBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 5)
       ToolsDBBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 6)
@@ -46,13 +41,16 @@ Public Class MachinePageUC
       TestingPageBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 8)
    End Sub
 
-   Private Sub MachinePage_Loaded(sender As Object, e As RoutedEventArgs)
+   Private Sub MachinePage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
 
-      Dim Test As Integer = GetPrivateProfileInt(S_GENERAL, K_TESTINGPAGE, 0, m_MainWindow.GetIniFile())
-      If Test = 1 Then
-         TestingPageBtn.Visibility = Windows.Visibility.Visible
+      'Inizializzazione della pagina di apertura all'apertura della pagina MachinePage
+      If Not m_MainWindow.m_MachineStatusUC.m_bIsClicked Then
+         AlarmsBtn.IsChecked = True
+         m_ActiveMachinePage = MachinePages.Alarms
       Else
-         TestingPageBtn.Visibility = Windows.Visibility.Hidden
+         TestingPageBtn.IsChecked = True
+         m_ActiveMachinePage = MachinePages.MachineCN
+         m_MainWindow.m_MachineStatusUC.m_bIsClicked = False
       End If
 
    End Sub
@@ -67,10 +65,10 @@ Public Class MachinePageUC
          Case MachinePages.MachiningDb
             AlarmsBtn.IsChecked = False
             MachiningDBBtn.IsChecked = True
-         Case MachinePages.Testing
+         Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
-            MachinePageGrid.Children.Remove(m_TestingPage)
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
       End Select
@@ -89,10 +87,10 @@ Public Class MachinePageUC
          Case MachinePages.MachiningDb
             ToolsDBBtn.IsChecked = False
             MachiningDBBtn.IsChecked = True
-         Case MachinePages.Testing
+         Case MachinePages.MachineCN
             ToolsDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
-            MachinePageGrid.Children.Remove(m_TestingPage)
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
             MachinePageGrid.Children.Add(m_ToolsDbPageUC)
             m_ActiveMachinePage = MachinePages.ToolsDb
       End Select
@@ -111,10 +109,10 @@ Public Class MachinePageUC
             MachiningDBBtn.IsChecked = False
          Case MachinePages.MachiningDb
             MachiningDBBtn.IsChecked = True
-         Case MachinePages.Testing
+         Case MachinePages.MachineCN
             MachiningDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
-            MachinePageGrid.Children.Remove(m_TestingPage)
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
             m_ActiveMachinePage = MachinePages.MachiningDb
       End Select
@@ -126,19 +124,19 @@ Public Class MachinePageUC
             AlarmsBtn.IsChecked = False
             TestingPageBtn.IsChecked = True
             MachinePageGrid.Children.Remove(m_AlarmsPageUC)
-            MachinePageGrid.Children.Add(m_TestingPage)
-            m_ActiveMachinePage = MachinePages.Testing
+            MachinePageGrid.Children.Add(m_MachineCNPageUC)
+            m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.ToolsDb
             ToolsDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
          Case MachinePages.MachiningDb
             TestingPageBtn.IsChecked = False
-         Case MachinePages.Testing
+         Case MachinePages.MachineCN
             TestingPageBtn.IsChecked = True
       End Select
    End Sub
 
-   Private Sub MachinePage_Unloaded(sender As Object, e As RoutedEventArgs)
+   Private Sub MachinePage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       Select Case m_ActiveMachinePage
          Case MachinePages.Alarms
             If Not IsNothing(m_AlarmsPageUC.m_SetUpPage) And MachinePageGrid.Children.Contains(m_AlarmsPageUC.m_SetUpPage) Then
@@ -157,10 +155,10 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_MachiningDbPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
-         Case MachinePages.Testing
+         Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
-            MachinePageGrid.Children.Remove(m_TestingPage)
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
       End Select
diff --git a/MachineStatusUC.xaml b/MachineStatusUC.xaml
index 9c70c7b..6838d9c 100644
--- a/MachineStatusUC.xaml
+++ b/MachineStatusUC.xaml
@@ -4,7 +4,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="85.3" d:DesignWidth="1280" Initialized="MachineStatus_Initialized" PreviewMouseDown="MachineStatus_PreviewMouseDown" Loaded="MachineStatus_Loaded">
+   d:DesignHeight="85.3" d:DesignWidth="1280" Initialized="MachineStatus_Initialized" Loaded="MachineStatus_Loaded">
    
    <!-- Chiamata al Dictionary -->
    <UserControl.Resources>
diff --git a/MachineStatusUC.xaml.vb b/MachineStatusUC.xaml.vb
index 48c6bb6..9e8cb74 100644
--- a/MachineStatusUC.xaml.vb
+++ b/MachineStatusUC.xaml.vb
@@ -6,6 +6,8 @@ Public Class MachineStatusUC
    Private m_MainWindow As MainWindow = Application.Current.MainWindow
    Private m_MachinePage As MachinePageUC
 
+   ' Flag che indica se è stato premuto questo controllo per chiamare la paginacon lista errori
+   Friend m_bIsClicked As Boolean = False
    Friend m_CN As CN_generico
 
    Private Sub MachineStatus_Initialized(sender As Object, e As EventArgs)
@@ -16,7 +18,7 @@ Public Class MachineStatusUC
       m_MachinePage = m_MainWindow.m_MachinePageUC
    End Sub
 
-   Private Sub MachineStatus_PreviewMouseDown(sender As Object, e As MouseButtonEventArgs)
+   Private Sub MachineStatus_PreviewMouseDown(sender As Object, e As MouseButtonEventArgs) Handles Me.PreviewMouseDown
       MachinePageClick()
    End Sub
 
@@ -29,7 +31,7 @@ Public Class MachineStatusUC
             m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_WorkInProgressPageUC)
             m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_MachinePageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.Machine
-            AlarmsPageClick()
+            m_bIsClicked = True
          Case MainWindow.Pages.DirectCut
             m_MainWindow.DirectCutBtn.IsChecked = False
             m_MainWindow.MachineBtn.IsChecked = True
@@ -37,7 +39,7 @@ Public Class MachineStatusUC
             m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
             m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_MachinePageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.Machine
-            AlarmsPageClick()
+            m_bIsClicked = True
          Case MainWindow.Pages.CadCut
             m_MainWindow.CadCutBtn.IsChecked = False
             m_MainWindow.MachineBtn.IsChecked = True
@@ -45,7 +47,7 @@ Public Class MachineStatusUC
             m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
             m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_MachinePageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.Machine
-            AlarmsPageClick()
+            m_bIsClicked = True
          Case MainWindow.Pages.RawPart
             m_MainWindow.CadCutBtn.IsChecked = True
             m_MainWindow.MachineBtn.IsChecked = False
@@ -65,37 +67,17 @@ Public Class MachineStatusUC
             m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
             m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_MachinePageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.Machine
-            AlarmsPageClick()
+            m_bIsClicked = True
          Case MainWindow.Pages.Machine
             m_MainWindow.MachineBtn.IsChecked = True
-            AlarmsPageClick()
+            m_bIsClicked = True
          Case MainWindow.Pages.Options
             m_MainWindow.MachineBtn.IsChecked = True
             m_MainWindow.OptionsBtn.IsChecked = False
             m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OptionsPageUC)
             m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_MachinePageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.Machine
-            AlarmsPageClick()
-      End Select
-   End Sub
-
-   Sub AlarmsPageClick()
-      'Emulo il click della pagina allarmi dopo il click della pagina macchina
-      Select Case m_MachinePage.m_ActiveMachinePage
-         Case MachinePageUC.MachinePages.Alarms
-            m_MachinePage.AlarmsBtn.IsChecked = True
-         Case MachinePageUC.MachinePages.ToolsDb
-            m_MachinePage.AlarmsBtn.IsChecked = False
-            m_MachinePage.ToolsDBBtn.IsChecked = True
-         Case MachinePageUC.MachinePages.MachiningDb
-            m_MachinePage.AlarmsBtn.IsChecked = False
-            m_MachinePage.MachiningDBBtn.IsChecked = True
-         Case MachinePageUC.MachinePages.Testing
-            m_MachinePage.AlarmsBtn.IsChecked = True
-            m_MachinePage.TestingPageBtn.IsChecked = False
-            m_MachinePage.MachinePageGrid.Children.Remove(m_MachinePage.m_TestingPage)
-            m_MachinePage.MachinePageGrid.Children.Add(m_MachinePage.m_AlarmsPageUC)
-            m_MachinePage.m_ActiveMachinePage = MachinePageUC.MachinePages.Alarms
+            m_bIsClicked = True
       End Select
    End Sub
 
diff --git a/MainWindow.xaml.vb b/MainWindow.xaml.vb
index 8390c3f..85799f2 100644
--- a/MainWindow.xaml.vb
+++ b/MainWindow.xaml.vb
@@ -71,6 +71,7 @@ Class MainWindow
       WorkInProgress
       DirectCut
       CadCut
+      Photo
       Open
       RawPart
       Draw
@@ -351,7 +352,7 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_CurrentProjectPageUC)
             MainWindowGrid.Children.Add(m_WorkInProgressPageUC)
             m_ActivePage = Pages.WorkInProgress
-         Case Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
+         Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
             WorkInProgressBtn.IsChecked = False
             CadCutBtn.IsChecked = True
          Case Pages.FrameCut
@@ -399,7 +400,7 @@ Class MainWindow
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Remove(m_CadCutPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_DirectCutPageUC)
             m_ActivePage = Pages.DirectCut
-         Case Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
+         Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
             DirectCutBtn.IsChecked = False
             CadCutBtn.IsChecked = True
          Case Pages.FrameCut
@@ -448,7 +449,7 @@ Class MainWindow
             m_ActivePage = Pages.CadCut
          Case Pages.CadCut
             CadCutBtn.IsChecked = True
-         Case Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
+         Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
             CadCutBtn.IsChecked = True
          Case Pages.FrameCut
             CadCutBtn.IsChecked = True
@@ -500,7 +501,7 @@ Class MainWindow
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Remove(m_CadCutPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_FrameCutPageUC)
             m_ActivePage = Pages.FrameCut
-         Case Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
+         Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
             CadCutBtn.IsChecked = True
             FrameCutBtn.IsChecked = False
          Case Pages.FrameCut
@@ -550,7 +551,7 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_CurrentProjectPageUC)
             MainWindowGrid.Children.Add(m_MachinePageUC)
             m_ActivePage = Pages.Machine
-         Case Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
+         Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.Simulation
             CadCutBtn.IsChecked = True
             MachineBtn.IsChecked = False
          Case Pages.FrameCut
@@ -593,7 +594,7 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_CurrentProjectPageUC)
             MainWindowGrid.Children.Add(m_OptionsPageUC)
             m_ActivePage = Pages.Options
-         Case Pages.RawPart
+         Case Pages.Photo, Pages.RawPart
             CadCutBtn.IsChecked = True
             OptionsBtn.IsChecked = False
          Case Pages.Simulation
diff --git a/OmagCUT.vbproj b/OmagCUT.vbproj
index 0ff09dc..3a83dfc 100644
--- a/OmagCUT.vbproj
+++ b/OmagCUT.vbproj
@@ -239,8 +239,8 @@
     <Compile Include="SplitPageUC.xaml.vb">
       <DependentUpon>SplitPageUC.xaml</DependentUpon>
     </Compile>
-    <Compile Include="TestingPageUC.xaml.vb">
-      <DependentUpon>TestingPageUC.xaml</DependentUpon>
+    <Compile Include="MachineCNPageUC.xaml.vb">
+      <DependentUpon>MachineCNPageUC.xaml</DependentUpon>
     </Compile>
     <Compile Include="ToolChangerPosUC.xaml.vb">
       <DependentUpon>ToolChangerPosUC.xaml</DependentUpon>
@@ -410,7 +410,7 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
-    <Page Include="TestingPageUC.xaml">
+    <Page Include="MachineCNPageUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
diff --git a/PhotoPageUC.xaml.vb b/PhotoPageUC.xaml.vb
index 3b4bdf0..68e8c6f 100644
--- a/PhotoPageUC.xaml.vb
+++ b/PhotoPageUC.xaml.vb
@@ -136,6 +136,7 @@ Public Class PhotoPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_PhotoPage)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
       ' Lancio caricamento nuova foto
       If m_bFileOk Then
          m_MainWindow.m_CadCutPageUC.PostPhoto(m_sCurrDir & "\" & m_sCurrFile)
@@ -146,6 +147,7 @@ Public Class PhotoPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_PhotoPage)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
    End Sub
 
    Private Sub PhotoPage_Unloaded(sender As Object, e As RoutedEventArgs)
diff --git a/RawPartPageUC.xaml b/RawPartPageUC.xaml
index 853d09e..0e39af8 100644
--- a/RawPartPageUC.xaml
+++ b/RawPartPageUC.xaml
@@ -45,8 +45,8 @@
             <RowDefinition Height="4*"/>
             <RowDefinition Height="1*"/>
             <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="0.5*"/>
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
          
@@ -87,6 +87,7 @@
             <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
             <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Width="90"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
          </Grid>
                   
          <!-- Definizione della Grid per il materiale -->
@@ -119,17 +120,36 @@
          </GroupBox>
 
          <!-- Definizione della Grid per Punti -->
-         <GroupBox Name="PointsGpBx" Grid.Row="4" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_GroupBox}" >
+         <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_GroupBox}" >
 
-            <Grid>
+            <Grid >
                <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
                </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
 
-               <ToggleButton Name="AddBtn" Style="{StaticResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="RemoveBtn" Grid.Column="1"
+               <ComboBox Name="ByPointsCmbx" Grid.ColumnSpan="6" Height="38" Width="200">
+                  <ComboBox.ItemTemplate>
+                     <DataTemplate>
+                        <Label Content="{Binding sName}" FontSize="20" />
+                     </DataTemplate>
+                  </ComboBox.ItemTemplate>
+               </ComboBox>
+
+               <ToggleButton Name="AddBtn" Grid.Row="1" Grid.ColumnSpan="2" Margin="0,10,0,0"
                   Style="{StaticResource OmagCut_YellowToggleButton}"/>
+               <ToggleButton Name="RemoveBtn" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Margin="0,10,0,0"
+                  Style="{StaticResource OmagCut_YellowToggleButton}"/>
+               <Button Name="CloseBtn" Grid.Column="4" Grid.Row="1" Grid.ColumnSpan="2" Margin="0,10,0,0"
+                  Style="{StaticResource OmagCut_YellowTextButton}"/>
             </Grid>
             
          </GroupBox>
diff --git a/RawPartPageUC.xaml.vb b/RawPartPageUC.xaml.vb
index c35947a..8d09fdb 100644
--- a/RawPartPageUC.xaml.vb
+++ b/RawPartPageUC.xaml.vb
@@ -45,10 +45,29 @@ Public Class RawPartPageUC
       REMOVE = 2
    End Enum
 
+   ' Variabile che indica la modalità di acquisizione punti(se presi dal disegno o dal laser)
+   Private m_bPointsFromDraw As Boolean = True
+   ' Array per modalità per punti
+   Private ByPointsModeArray As New List(Of StringIdCmBx)
+   ' Id della curva composita Kerf definita con il laser
+   Private m_nKerfId As Integer = GDB_ID.NULL
+   ' Primo punto acquisito
+   Private m_bptLast As Boolean = False
+   Private m_ptLast As Point3d = Point3d.ORIG
+   ' Lista di linee che creeranno la curva composita Kerf
+   Private m_CurveXKerfList As New List(Of Integer)
+   ' Flag che indica se è in corso la definizione tramite laser o se il grezzo è già chiuso
+   Private m_bIsRawDefiningByLaser As Boolean = False
+
    Private Sub RawPartPage_Initialized(sender As Object, e As EventArgs)
+      ' Definizione dei campi per modalità per punti
+      ByPointsModeArray.Add(New StringIdCmBx(0, EgtMsg(MSG_RAWPARTPAGEUC + 29)))      'From Draw
+      ByPointsModeArray.Add(New StringIdCmBx(1, EgtMsg(MSG_RAWPARTPAGEUC + 30)))      'From Laser
 
       'Associazione della lista materiali alla combobox
       MaterialsCmbx.ItemsSource = m_MainWindow.m_CurrentMachine.Materials
+      ' Associazione della lista modalità per punti alla CmBx
+      ByPointsCmbx.ItemsSource = ByPointsModeArray
 
       'Associazione tag textbox e label per visualizzare nome nella calcolatrice
       LengthTxBx.Tag = LengthTxBl
@@ -89,6 +108,12 @@ Public Class RawPartPageUC
          m_dTableLength = ptMax.x - ptMin.x
          m_dTableWidth = ptMax.y - ptMin.y
       End If
+      ' Parcheggio pezzi presenti nel grezzo
+      Dim nPartId As Integer = EgtGetFirstPartInRawPart(m_CurrProjPage.m_nRawId)
+      While nPartId <> GDB_ID.NULL
+         m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId)
+         nPartId = EgtGetFirstPartInRawPart(m_CurrProjPage.m_nRawId)
+      End While
       ' Nascondo eventuali pezzi in parcheggio
       HideParkedParts()
       ' Deseleziono pezzi
@@ -109,7 +134,7 @@ Public Class RawPartPageUC
          m_RawOffsY = ptRawMin.y - m_ptTableMin.y + m_RawKerf
          ' aggiorno l'apparenza del grezzo
          AdjustRawPartOnStart()
-      ' Altrimenti lo definisco
+         ' Altrimenti lo definisco
       Else
          ' Leggo da Ini gli ultimi valori
          m_RawLength = GetPrivateProfileDouble(S_RAWPART, K_RAWLENGTH, 2500, m_MainWindow.GetIniFile())
@@ -134,10 +159,19 @@ Public Class RawPartPageUC
       If EgtExistsInfo(m_CurrProjPage.m_nRawId, KEY_RAWBYPOINTS) Then
          m_bRectangle = False
          ByPointsBtn.IsChecked = True
+         PointsGpBx.Visibility = Windows.Visibility.Visible
+         ByPointsCmbx.SelectedItem = StringIdCmBx.FromIdToStringIdCmBx(0, ByPointsModeArray)
+         ' Visualizzo bottoni da disegno
+         AddBtn.SetValue(Grid.ColumnSpanProperty, 3)
+         RemoveBtn.SetValue(Grid.ColumnProperty, 3)
+         RemoveBtn.SetValue(Grid.ColumnSpanProperty, 3)
+         CloseBtn.Visibility = Windows.Visibility.Hidden
+         m_bPointsFromDraw = True
          EgtZoom(ZM.ALL)
       Else
          m_bRectangle = True
          RectangleBtn.IsChecked = True
+         PointsGpBx.Visibility = Windows.Visibility.Hidden
          UpdateRawPart(bHeightModified)
       End If
       ' Imposto il materiale corrente nella combobox
@@ -187,7 +221,7 @@ Public Class RawPartPageUC
             ' il grezzo non è cambiato, perchè il nuovo punto è sulla vecchia linea
             AddBtn.IsChecked = False
             m_nPtMode = PTMODE.MOVE
-         ' se rimuovi
+            ' se rimuovi
          ElseIf m_nPtMode = PTMODE.REMOVE Then
             ' ci devono essere almeno 4 punti
             If EgtGetCurveCompoJointCount(nKerfId) >= 4 Then
@@ -321,7 +355,7 @@ Public Class RawPartPageUC
       Dim nKerfId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_KERF)
       ' Identifico il punto
       Dim nU = CInt(m_dDragPar)
-      ' Aggiusto Z punto movimentato
+      ' Aggiusto Z punto movimentato (è in globale)
       ptCurr.z = m_ptTableMin.z + m_CurrProjPage.m_dAddTable + m_RawHeight
       ' Sposto il punto
       If Not EgtModifyCurveCompoJoint(nKerfId, nU, ptCurr, GDB_RT.GLOB) Then Return
@@ -358,6 +392,11 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      If Not m_bRectangle And Not m_bPointsFromDraw Then
+         If m_bIsRawDefiningByLaser Then
+            CloseRawByLaser()
+         End If
+      End If
       ' Apro pagina di selezione della lavorazione prima di chiudere il grezzo
       m_ChooseMachiningPage = New ChooseMachining(m_MainWindow)
       If m_ChooseMachiningPage.DialogResult Then
@@ -385,11 +424,16 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub RectangleBtn_Click(sender As Object, e As RoutedEventArgs) Handles RectangleBtn.Click
+      ' Se ero in  modalità da laser
+      If m_bPointsFromDraw Then
+         VerifyLaserDefining()
+      End If
       m_bRectangle = True
       LengthTxBx.IsEnabled = True
       WidthTxBx.IsEnabled = True
       OffsetXTxBx.IsEnabled = True
       OffsetYTxBx.IsEnabled = True
+      PointsGpBx.Visibility = Windows.Visibility.Hidden
       UpdateRawPart()
    End Sub
 
@@ -399,22 +443,86 @@ Public Class RawPartPageUC
       WidthTxBx.IsEnabled = False
       OffsetXTxBx.IsEnabled = False
       OffsetYTxBx.IsEnabled = False
+      PointsGpBx.Visibility = Windows.Visibility.Visible
+      ByPointsCmbx.SelectedItem = StringIdCmBx.FromIdToStringIdCmBx(0, ByPointsModeArray)
+      m_bPointsFromDraw = True
    End Sub
 
    Private Sub AddBtn_Click(sender As Object, e As RoutedEventArgs) Handles AddBtn.Click
       If m_bRectangle Then
          AddBtn.IsChecked = False
       End If
-      RemoveBtn.IsChecked = False
-      m_nPtMode = If(AddBtn.IsChecked, PTMODE.ADD, PTMODE.MOVE)
+      If m_bPointsFromDraw Then
+         RemoveBtn.IsChecked = False
+         m_nPtMode = If(AddBtn.IsChecked, PTMODE.ADD, PTMODE.MOVE)
+      Else
+         Dim ptAcquired As Point3d
+         AcquireLaserPoint(ptAcquired)
+         ' Aggiusto Z punto movimentato (è in locale al tavolo)
+         ptAcquired.z = m_CurrProjPage.m_dAddTable + m_RawHeight
+         If m_bptLast Then
+            Dim NewLine As Integer = EgtCreateLine(m_CurrProjPage.m_nRawId, m_ptLast, ptAcquired)
+            EgtSetColor(NewLine, m_KerfCol)
+            m_CurveXKerfList.Add(NewLine)
+         Else
+            m_bptLast = True
+         End If
+         m_ptLast = ptAcquired
+         If m_CurveXKerfList.Count > 1 Then
+            OkBtn.IsEnabled = True
+         End If
+         AddBtn.IsChecked = False
+         EgtDraw()
+      End If
+   End Sub
+
+   Private Sub AcquireLaserPoint(ByRef ptAcquired As Point3d)
+      Dim ptTipP1 As Point3d
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
+         Return
+      End If
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = String.Empty
+      GetPrivateProfileString(S_MACH_MACH, K_CURRSAW, "", sSaw, m_MainWindow.GetMachIniFile())
+      ' Imposto come testa corrente il laser (senza utensile ovviamente)
+      If Not EgtSetCalcTool("", "H3", 1) Then
+         Return
+      End If
+      ' Trasformo in posizione punta utensile in basso
+      If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, ptTipP1) Then
+         Return
+      End If
+      ' Ora imposto la lama corrente
+      If Not EgtSetCalcTool(sSaw, "H1", 1) Then
+         Return
+      End If
+      ' Porto il tip nell'origine tavola
+      ptAcquired = ptTipP1
+      ptAcquired.ToLoc(New Frame3d(m_ptTableMin))
    End Sub
 
    Private Sub RemoveBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemoveBtn.Click
       If m_bRectangle Then
          RemoveBtn.IsChecked = False
       End If
-      AddBtn.IsChecked = False
-      m_nPtMode = If(RemoveBtn.IsChecked, PTMODE.REMOVE, PTMODE.MOVE)
+      If m_bPointsFromDraw Then
+         AddBtn.IsChecked = False
+         m_nPtMode = If(RemoveBtn.IsChecked, PTMODE.REMOVE, PTMODE.MOVE)
+      Else
+         If m_CurveXKerfList.Count > 0 Then
+            ' Cancello ultima linea
+            EgtErase(m_CurveXKerfList(m_CurveXKerfList.Count - 1))
+            m_CurveXKerfList.RemoveAt(m_CurveXKerfList.Count - 1)
+            ' Aggiorno ptLast
+            EgtEndPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
+         Else
+            m_bptLast = False
+         End If
+         RemoveBtn.IsChecked = False
+         EgtDraw()
+      End If
    End Sub
 
    Private Sub UpdateRawPart(Optional bHeightModified As Boolean = False)
@@ -435,11 +543,11 @@ Public Class RawPartPageUC
       If nRawId = GDB_ID.NULL And m_RawHeight > EPS_SMALL Then
          m_CurrProjPage.m_nRawId = EgtAddRawPart(Point3d.ORIG(), m_RawLength + 2 * m_RawKerf,
                                                  m_RawWidth + 2 * m_RawKerf, m_RawHeight, Col)
-      ' se esiste e da cancellare
+         ' se esiste e da cancellare
       ElseIf m_RawHeight < EPS_SMALL Then
          EgtRemoveRawPart(nRawId)
          m_CurrProjPage.m_nRawId = GDB_ID.NULL
-      ' Altrimenti lo modifico
+         ' Altrimenti lo modifico
       Else
          m_CurrProjPage.m_nRawId = nRawId
          EgtModifyRawPart(nRawId, Point3d.ORIG(), m_RawLength + 2 * m_RawKerf,
@@ -495,11 +603,11 @@ Public Class RawPartPageUC
       If m_CurrProjPage.m_nRawId = GDB_ID.NULL Then
          UpdateRawPart(True)
          Return
-      ' se da cancellare
+         ' se da cancellare
       ElseIf m_RawHeight < EPS_SMALL Then
          EgtRemoveRawPart(m_CurrProjPage.m_nRawId)
          m_CurrProjPage.m_nRawId = GDB_ID.NULL
-      ' altrimenti da aggiornare
+         ' altrimenti da aggiornare
       Else
          ' Aggiorno solido
          EgtModifyRawPartHeight(m_CurrProjPage.m_nRawId, m_RawHeight)
@@ -833,4 +941,94 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Unloaded(sender As Object, e As RoutedEventArgs)
    End Sub
 
+   Private Sub VerifyLaserDefining()
+      If m_bIsRawDefiningByLaser Then
+         If m_CurveXKerfList.Count > 1 Then
+            CloseRawByLaser()
+         Else
+            ' Elimino tutti i segmenti disegnati
+            For Each nEntityId In m_CurveXKerfList
+               If EgtGetType(nEntityId) = GDB_TY.CRV_LINE Then
+                  EgtErase(nEntityId)
+               End If
+            Next
+            ' Azzero lista e punto di partenza
+            m_CurveXKerfList.Clear()
+            'Creo rettangolo
+            UpdateRawPart()
+         End If
+         m_bIsRawDefiningByLaser = False
+      End If
+   End Sub
+
+   Private Sub ByPointsMode_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles ByPointsCmbx.SelectionChanged
+      Dim SelectedItem As StringIdCmBx = ByPointsCmbx.SelectedItem
+      Select Case SelectedItem.nId
+         Case 0
+            m_bPointsFromDraw = True
+            AddBtn.SetValue(Grid.ColumnSpanProperty, 3)
+            VerifyLaserDefining()
+            ' Visualizzo bottoni per disegno
+            RemoveBtn.SetValue(Grid.ColumnProperty, 3)
+            RemoveBtn.SetValue(Grid.ColumnSpanProperty, 3)
+            CloseBtn.Visibility = Windows.Visibility.Hidden
+         Case 1
+            m_bPointsFromDraw = False
+            LoadFromMachine()
+            ' Azzero lista e punto di partenza
+            m_CurveXKerfList.Clear()
+            m_bptLast = False
+            ' Segno flag che indica definizione grezzo con laser in corso
+            m_bIsRawDefiningByLaser = True
+            ' Visualizzo bottoni per laser
+            AddBtn.SetValue(Grid.ColumnSpanProperty, 2)
+            RemoveBtn.SetValue(Grid.ColumnProperty, 2)
+            RemoveBtn.SetValue(Grid.ColumnSpanProperty, 2)
+            CloseBtn.Visibility = Windows.Visibility.Visible
+            OkBtn.IsEnabled = False
+      End Select
+   End Sub
+
+   Private Sub LoadFromMachine()
+      ' Elimino grezzo già presente
+      EgtErase(EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID))
+      EgtErase(EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_KERF))
+      EgtErase(EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_OUTLINE))
+      EgtErase(EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_OUTKERF))
+      EgtDraw()
+   End Sub
+
+   Private Sub CloseBtn_Checked(sender As Object, e As RoutedEventArgs) Handles CloseBtn.Click
+      CloseRawByLaser()
+   End Sub
+
+   Private Sub CloseRawByLaser()
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXKerfList(0), ptStart)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, m_ptLast, ptStart))
+      ' Trasformo lista di curve in un array
+      Dim CurveXKerfArray As Integer() = m_CurveXKerfList.ToArray
+      ' Creo contorno kerf
+      Dim nKerfId As Integer = EgtCreateCurveCompoByChain(m_CurrProjPage.m_nRawId, m_CurveXKerfList.Count, CurveXKerfArray, ptStart, True)
+      EgtSetName(nKerfId, NAME_KERF)
+      EgtSetColor(nKerfId, m_KerfCol)
+      ' Pulisco lista entità del grezzo
+      m_CurveXKerfList.Clear()
+      ' Aggiorno il grezzo
+      UpdateRawPartKerf()
+      ' Aggiorno dimensioni grezzo
+      UpdateRawXYData()
+      ' Salvo il valore del kerf (sempre in mm)
+      EgtSetInfo(m_CurrProjPage.m_nRawId, KEY_KERF, DoubleToString(m_RawKerf, 4))
+      ' Segno flag che indica fine della definizione
+      m_bIsRawDefiningByLaser = False
+      ' Elimino primo punto per prossimo grezzo
+      m_bptLast = False
+      ' Aggiorno visualizzazione
+      EgtDraw()
+      ' Disattivo il bottone
+      CloseBtn.IsEnabled = False
+   End Sub
+
 End Class
diff --git a/SideAngleUc.xaml.vb b/SideAngleUc.xaml.vb
index e86b9d1..a3e4263 100644
--- a/SideAngleUc.xaml.vb
+++ b/SideAngleUc.xaml.vb
@@ -2,6 +2,18 @@
 
 Public Class SideAngleUC
 
+   ' Costanti layer componenti
+   Friend Const COMPO_LAYER_AUX As String = "LayAux"
+   Friend Const COMPO_LAYER_QUOTATURE As String = "Quotature"
+   Friend Const COMPO_LAYER_ETICHETTE As String = "Etichette"
+   ' Costanti testi angoli inclinati
+   Friend Const SIDE_ANGLE_LAYER As String = "SideAngle"
+   Friend Const NEST_SIDE_ANGLE_LAYER As String = "NestSideAngle"
+   ' Costante info angolo inclinato
+   Friend Const SIDE_ANGLE_INFO As String = "SideAng"
+   ' Costante layer contorno esterno pezzo
+   Friend Const OUTLOOP_LAYER As String = "OutLoop"
+
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = Application.Current.MainWindow
    Private m_DrawPage As DrawPageUC
@@ -52,9 +64,9 @@ Public Class SideAngleUC
       ' Ricavo nome primo pezzo
       Dim Part1 As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
       ' Nascondo layer delle misure
-      EgtSetStatus(EgtGetFirstNameInGroup(Part1, "LayAux"), GDB_ST.OFF)
-      EgtSetStatus(EgtGetFirstNameInGroup(Part1, "Quotature"), GDB_ST.OFF)
-      EgtSetStatus(EgtGetFirstNameInGroup(Part1, "Etichette"), GDB_ST.OFF)
+      EgtSetStatus(EgtGetFirstNameInGroup(Part1, COMPO_LAYER_AUX), GDB_ST.OFF)
+      EgtSetStatus(EgtGetFirstNameInGroup(Part1, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+      EgtSetStatus(EgtGetFirstNameInGroup(Part1, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       EgtZoom(ZM.ALL)
       EgtDraw()
    End Sub
@@ -68,7 +80,7 @@ Public Class SideAngleUC
       Dim TxBlIndex As Integer = 1
       For Index As Integer = 10 - m_SideAngleEntityList.Count + 1 To 10
          GetChBxFromIndex(Index).Visibility = Windows.Visibility.Visible
-         GetTxBlFromIndex(Index).Text = "A " & TxBlIndex
+         GetTxBlFromIndex(Index).Text = "A" & TxBlIndex
          GetTxBlFromIndex(Index).Visibility = Windows.Visibility.Visible
          TxBlIndex += 1
       Next
@@ -130,16 +142,16 @@ Public Class SideAngleUC
          ' Ricavo nome primo pezzo
          Part1 = EgtGetFirstInGroup(GDB_ID.ROOT)
          ' Attivo layer delle misure
-         EgtSetStatus(EgtGetFirstNameInGroup(Part1, "LayAux"), GDB_ST.ON_)
-         EgtSetStatus(EgtGetFirstNameInGroup(Part1, "Quotature"), GDB_ST.ON_)
-         EgtSetStatus(EgtGetFirstNameInGroup(Part1, "Etichette"), GDB_ST.ON_)
+         EgtSetStatus(EgtGetFirstNameInGroup(Part1, COMPO_LAYER_AUX), GDB_ST.ON_)
+         EgtSetStatus(EgtGetFirstNameInGroup(Part1, COMPO_LAYER_QUOTATURE), GDB_ST.ON_)
+         EgtSetStatus(EgtGetFirstNameInGroup(Part1, COMPO_LAYER_ETICHETTE), GDB_ST.ON_)
          ' Svuoto layer in cui sono presenti i testi con le inclinazioni dei lati
-         EgtEmptyGroup(EgtGetFirstNameInGroup(Part1, "SideAngle"))
+         EgtEmptyGroup(EgtGetFirstNameInGroup(Part1, SIDE_ANGLE_LAYER))
 
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Ricavo nome pezzo precedentemente selezionato
          Part1 = m_MainWindow.m_ImportPageUC.m_PrevSelPart
-         EgtErase(EgtGetFirstNameInGroup(Part1, "SideAngle"))
+         EgtErase(EgtGetFirstNameInGroup(Part1, SIDE_ANGLE_LAYER))
       End If
       EgtDraw()
    End Sub
@@ -148,7 +160,7 @@ Public Class SideAngleUC
       ' Ricavo nome primo pezzo
       Dim Part1 As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
       ' Ricavo nome layer con geometria esterna pezzo
-      Dim OutLoop As Integer = EgtGetFirstNameInGroup(Part1, "OutLoop")
+      Dim OutLoop As Integer = EgtGetFirstNameInGroup(Part1, OUTLOOP_LAYER)
       For Each Entity In m_SideAngleEntityList
          Entity.nGeomId = EgtGetFirstNameInGroup(OutLoop, Entity.sEntityName)
       Next
@@ -171,26 +183,26 @@ Public Class SideAngleUC
 
       ' Cancello testi già presenti
       ' Ricavo nome layer con geometria esterna pezzo
-      Dim OutLoop As Integer = EgtGetFirstNameInGroup(Part1, "OutLoop")
+      Dim OutLoop As Integer = EgtGetFirstNameInGroup(Part1, OUTLOOP_LAYER)
       ' Calcolo dimensione ingombro OutLoop
       Dim ptMin, ptMax As Point3d
       EgtGetBBoxGlob(OutLoop, GDB_BB.STANDARD, ptMin, ptMax)
       Dim dBBoxRad As Double = 0.5 * Point3d.DistXY(ptMin, ptMax)
       ' Ricavo nome layer con testi inclinazioni
-      Dim TextLayer As Integer = EgtGetFirstNameInGroup(Part1, "SideAngle")
+      Dim TextLayer As Integer = EgtGetFirstNameInGroup(Part1, SIDE_ANGLE_LAYER)
       ' Se presente lo svuoto
       If TextLayer <> GDB_ID.NULL Then
          EgtEmptyGroup(TextLayer)
       Else
          ' altrimenti lo creo
          TextLayer = EgtCreateGroup(Part1)
-         EgtSetName(TextLayer, "SideAngle")
+         EgtSetName(TextLayer, SIDE_ANGLE_LAYER)
       End If
       ' Lo svuoto
 
       For Each Entity In m_SideAngleEntityList
          ' Creo testo con angolo di inclinazione
-         AddTextToLine(Entity.sEntityName & " = " & DoubleToString(Entity.dSideAngle, 1) & "°", Entity.nTextId, Entity.nGeomId, 10, dBBoxRad)
+         AddTextToLine(Entity.sEntityName & " = " & DoubleToString(Entity.dSideAngle, 1) & "°", Entity.nTextId, Entity.nGeomId, 10, dBBoxRad, True)
       Next
 
       'Aggiorno visualizzazione
@@ -214,14 +226,14 @@ Public Class SideAngleUC
 
       AdjustFlatPart(Part1)
       ' Ricavo nome layer con geometria esterna pezzo
-      Dim OutLoop As Integer = EgtGetFirstNameInGroup(Part1, "OutLoop")
+      Dim OutLoop As Integer = EgtGetFirstNameInGroup(Part1, OUTLOOP_LAYER)
       ' Calcolo dimensione ingombro OutLoop
       Dim ptMin, ptMax As Point3d
       EgtGetBBoxGlob(OutLoop, GDB_BB.STANDARD, ptMin, ptMax)
       Dim dBBoxRad As Double = 0.5 * Point3d.DistXY(ptMin, ptMax)
       ' Creo layer per testi
       Dim TextLayer As Integer = EgtCreateGroup(Part1)
-      EgtSetName(TextLayer, "SideAngle")
+      EgtSetName(TextLayer, SIDE_ANGLE_LAYER)
 
       Dim LastLine As Integer = EgtGetLastInGroup(OutLoop)
       Dim CurrLine As Integer = EgtGetFirstInGroup(OutLoop)
@@ -312,13 +324,13 @@ Public Class SideAngleUC
       EgtGetName(CurrLine, sEntityName)
       m_SideAngleEntityList.Add(New SideAngleEntity(CurrLine, sEntityName, TextLayer, 0))
       ' Cancello inclinazione nell'apposito campo info
-      EgtRemoveInfo(CurrLine, "SideAng")
+      EgtRemoveInfo(CurrLine, SIDE_ANGLE_INFO)
       ' Creo testo con angolo di inclinazione 0
-      AddTextToLine(sEntityName & " = 0°", TextLayer, CurrLine, 10, dBBoxRad)
+      AddTextToLine(sEntityName & " = 0°", TextLayer, CurrLine, 10, dBBoxRad, True)
    End Sub
 
    ' Funzione che dato un segmento e una distanz, scrive il testo centrato alla sua destra
-   Private Sub AddTextToLine(sText As String, TextLayer As Integer, CurrLine As Integer, dDistance As Double, dBBoxRad As Double)
+   Friend Shared Sub AddTextToLine(sText As String, TextLayer As Integer, CurrLine As Integer, dDistance As Double, dBBoxRad As Double, bTextExt As Boolean)
       ' Calcolo altezza testo
       Dim dH As Double = 0.1 * dBBoxRad
       ' Creo testo
@@ -339,23 +351,44 @@ Public Class SideAngleUC
       Dim vtCurrLine As Vector3d = ptLineEnd - ptLineStart
       ' lo normalizzo per ottenerne il versore
       vtCurrLine.Normalize()
-      ' calcolo vettore dal centro del BBox all'estremo più vicino
+      ' calcolo vettore dal centro del BBox all'estremo più vicino se testo esterno alla figura
       Dim vtptExtptMC As Vector3d
-      If vtCurrLine.x > 0 Then
-         If vtCurrLine.y > 0 Then
-            vtptExtptMC = ptMidBBox - New Point3d(ptMinBBox.x, ptMaxBBox.y, 0)
+      If bTextExt Then
+         If vtCurrLine.x > 0 Then
+            If vtCurrLine.y > 0 Then
+               vtptExtptMC = ptMidBBox - New Point3d(ptMinBBox.x, ptMaxBBox.y, 0)
+            Else
+               vtptExtptMC = ptMidBBox - ptMaxBBox
+            End If
          Else
-            vtptExtptMC = ptMidBBox - ptMaxBBox
+            If vtCurrLine.y > 0 Then
+               vtptExtptMC = ptMidBBox - ptMinBBox
+            Else
+               vtptExtptMC = ptMidBBox - New Point3d(ptMaxBBox.x, ptMinBBox.y, 0)
+            End If
          End If
       Else
-         If vtCurrLine.y > 0 Then
-            vtptExtptMC = ptMidBBox - ptMinBBox
+         If vtCurrLine.x > 0 Then
+            If vtCurrLine.y > 0 Then
+               vtptExtptMC = ptMidBBox - New Point3d(ptMaxBBox.x, ptMinBBox.y, 0)
+            Else
+               vtptExtptMC = ptMidBBox - ptMinBBox
+            End If
          Else
-            vtptExtptMC = ptMidBBox - New Point3d(ptMaxBBox.x, ptMinBBox.y, 0)
+            If vtCurrLine.y > 0 Then
+               vtptExtptMC = ptMidBBox - ptMaxBBox
+            Else
+               vtptExtptMC = ptMidBBox - New Point3d(ptMinBBox.x, ptMaxBBox.y, 0)
+            End If
          End If
+
       End If
       ' ruoto il vettore della CurrLine per ottenerne il perpendicolare
-      vtCurrLine.Rotate(Vector3d.Z_AX, -90)
+      If bTextExt Then
+         vtCurrLine.Rotate(Vector3d.Z_AX, -90)
+      Else
+         vtCurrLine.Rotate(Vector3d.Z_AX, 90)
+      End If
       ' Calcolo il centro del testo
       Dim ptTextMC As Point3d = Point3d.Media(ptLineStart, ptLineEnd) + vtCurrLine * (dDistance + (vtCurrLine * vtptExtptMC))
       EgtMove(nText, (ptTextMC - Point3d.ORIG))
@@ -390,10 +423,10 @@ Public Class SideAngleUC
       End If
       ' Scrivo nuovo angolo nelle info
       If dSideAngle <> 0 Then
-         EgtSetInfo(CurrEntity.nGeomId, "SideAng", dSideAngle)
+         EgtSetInfo(CurrEntity.nGeomId, SIDE_ANGLE_INFO, dSideAngle)
       Else
          ' Cancello inclinazione nell'apposito campo info
-         EgtRemoveInfo(CurrEntity.nGeomId, "SideAng")
+         EgtRemoveInfo(CurrEntity.nGeomId, SIDE_ANGLE_INFO)
       End If
       ' Aggiorno lista entità con nuova inclinazione
       CurrEntity.dSideAngle = dSideAngle
@@ -439,6 +472,37 @@ Public Class SideAngleUC
 
    End Sub
 
+   Friend Sub WriteSideAngleForNest()
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
+      Dim CurrPart As Integer
+      CurrPart = EgtGetFirstInGroup(GDB_ID.ROOT)
+      While CurrPart <> GDB_ID.NULL
+         ' Ricavo nome layer con geometria esterna pezzo
+         Dim OutLoop As Integer = EgtGetFirstNameInGroup(CurrPart, OUTLOOP_LAYER)
+         ' Calcolo dimensione ingombro OutLoop
+         Dim ptMin, ptMax As Point3d
+         EgtGetBBoxGlob(OutLoop, GDB_BB.STANDARD, ptMin, ptMax)
+         Dim dBBoxRad As Double = 0.5 * Point3d.DistXY(ptMin, ptMax)
+         ' Creo layer per testi nesting
+         Dim TextLayer As Integer = EgtCreateGroup(CurrPart)
+         EgtSetName(TextLayer, NEST_SIDE_ANGLE_LAYER)
+
+         Dim CurrLine As Integer = EgtGetFirstInGroup(OutLoop)
+         ' Ciclo che verifica se possibile inclinare la linea corrente fino alla penultima
+         While CurrLine <> GDB_ID.NULL
+            Dim dSideAngle As Double = 0
+            EgtGetInfo(CurrLine, SIDE_ANGLE_INFO, dSideAngle)
+            If Math.Abs(dSideAngle) > EPS_ANG_SMALL Then
+               ' Creo testo con angolo di inclinazione
+               AddTextToLine(dSideAngle & "°", TextLayer, CurrLine, 10, dBBoxRad, False)
+            End If
+            CurrLine = EgtGetNext(CurrLine)
+         End While
+         CurrPart = EgtGetNext(CurrPart)
+      End While
+   End Sub
+
    Friend Sub ReLoadSideAnglePage()
       SideAngleUC_Unloaded(Me, New RoutedEventArgs)
       SideAngleUC_Loaded(Me, New RoutedEventArgs)
diff --git a/TestingPageUC.xaml b/TestingPageUC.xaml
deleted file mode 100644
index 12d5be1..0000000
--- a/TestingPageUC.xaml
+++ /dev/null
@@ -1,73 +0,0 @@
-<UserControl x:Class="TestingPageUC"
-             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-             mc:Ignorable="d" 
-             d:DesignHeight="768" d:DesignWidth="1280" Loaded="TestingPage_Loaded">
-
-   <!-- Chiamata al Dictionary -->
-   <UserControl.Resources>
-      <ResourceDictionary Source="OmagCutDictionary.xaml"/>
-   </UserControl.Resources>
-
-   <!-- Definizione della ImportPage -->
-   <Border Style="{StaticResource CustomBorder}" >
-
-      <Grid Name="ImportPageGrid" >
-         <Grid.ColumnDefinitions>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <!-- Definizione della grid inferiore -->
-         <Grid Name="LowerButtonGrid" Grid.Row="2" Grid.ColumnSpan="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="2*"/>
-            </Grid.ColumnDefinitions>
-
-            <Button Name="StartBtn" Content="Start" />
-            <Button Name="StopBtn" Grid.Column="1" Content="Stop" />
-            <Button Name="ResetBtn" Grid.Column="2" Content="Reset" />
-
-            <Button Name="AutoBtn" Grid.Column="3" Content="Auto" />
-            <Button Name="SingleBtn" Grid.Column="4" Content="Single" />
-            <Button Name="MDIBtn" Grid.Column="5" Content="MDI" />
-            <Button Name="ManualBtn" Grid.Column="6" Content="Manual" />
-            <Button Name="HomeBtn" Grid.Column="7" Content="Home" />
-
-            <Button Name="DownloadBtn" Grid.Column="8" Content="Download" />
-            <Button Name="UploadBtn" Grid.Column="9" Content="Upload" />
-            <Button Name="ActivateBtn" Grid.Column="10" Content="Activate" />
-            <Button Name="DeleteBtn" Grid.Column="11" Content="Delete" />
-            <Button Name="MDIConfirmBtn" Grid.Column="12" Content="ConfirmMDI" />
-
-            <UniformGrid Grid.Column="13" Rows="2">
-               <TextBox Name="MDITxBx" TextWrapping="Wrap" Text="G24+ XYZ P1/0/0 Q0/1/0 R0/0/1"
-                  />
-               <TextBox Name="DULoadTxBx" Text="900.0" />
-            </UniformGrid>
-
-         </Grid>
-
-      </Grid>
-
-   </Border>
-
-</UserControl>