deleted ignored files

Beam/CutData.lua

@@ -1,15 +0,0 @@
--- CutData.lua by Egaltech s.r.l.   20/03/2023 09:48:29
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local CutData = {
-   { On = true, Name = 'MiSideInvSaw620', Type = 'HeadSide'},
-   { On = true, Name = 'MiSideSaw620', Type = 'TailSide'},
-   { On = true, Name = 'MiSideInvSaw600', Type = 'HeadSide'},
-   { On = true, Name = 'MiSideSaw600', Type = 'TailSide'},
-   { On = true, Name = 'MiSideInvSaw620_H1', Type = 'HeadSide'},
-   { On = true, Name = 'MiSideSaw620_H1', Type = 'TailSide'}
-}
-
----------------------------------------------------------------------
-return CutData

Beam/DrillData.lua

@@ -1,27 +0,0 @@
--- DrillData.lua by Egaltech s.r.l.   06/11/2023 13:29:15
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local DrillData = {
-   { On = true, Name = 'DrillD05_4', Type = 'Drill'},
-   { On = true, Name = 'DrillD06', Type = 'Drill'},
-   { On = true, Name = 'DrillD08', Type = 'Drill'},
-   { On = true, Name = 'DrillD08_Long', Type = 'Drill'},
-   { On = true, Name = 'DrillD10', Type = 'Drill'},
-   { On = true, Name = 'DrillD12', Type = 'Drill'},
-   { On = true, Name = 'DrillD12_Long', Type = 'Drill'},
-   { On = true, Name = 'DrillD14', Type = 'Drill'},
-   { On = true, Name = 'DrillD16', Type = 'Drill'},
-   { On = true, Name = 'DrillD18', Type = 'Drill'},
-   { On = true, Name = 'DrillD18_Short', Type = 'Drill'},
-   { On = true, Name = 'DrillD20', Type = 'Drill'},
-   { On = true, Name = 'DrillD20_AT', Type = 'Drill_AT'},
-   { On = true, Name = 'DrillD25', Type = 'Drill'},
-   { On = true, Name = 'DrillD38', Type = 'AngleDrill'},
-   { On = true, Name = 'DrillPockD20', Type = 'Pocket'},
-   { On = true, Name = 'DrillPockD25', Type = 'Pocket'},
-   { On = true, Name = 'DrillPockD20_AT', Type = 'Pocket_AT'}
-}
-
----------------------------------------------------------------------
-return DrillData

Beam/MillingData.lua

@@ -1,39 +0,0 @@
--- MillingData.lua by Egaltech s.r.l.   16/02/2024 14:27:51
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local MillingData = {
-   { On = true, Name = 'Profiling25x130', Type = 'Prof'},
-   { On = true, Name = 'FreeCont25x130', Type = 'FreeContour'},
-   { On = true, Name = 'FreeCont20x50', Type = 'FreeContour'},
-   { On = true, Name = 'Mill_Tenon100x150', Type = 'Tenon'},
-   { On = true, Name = 'Mill_Tenon100x60', Type = 'Tenon'},
-   { On = true, Name = 'Mill_DtTen60x130', Type = 'DtTenon'},
-   { On = true, Name = 'Mill_DtMrt60x130', Type = 'DtMortise'},
-   { On = true, Name = 'Mill_DtMrt60x39_AT', Type = 'DtMortise_AT'},
-   { On = false, Name = 'Mill_DtMrt40x120r', Type = 'DtMortise'},
-   { On = true, Name = 'Mill_DtMrt35x130', Type = 'DtMortise'},
-   { On = true, Name = 'Milling100x60', Type = 'BirdsMouth'},
-   { On = false, Name = 'Chamfer25x130', Type = 'Chamfer'},
-   { On = true, Name = 'Milling100x60', Type = 'Chamfer'},
-   { On = true, Name = 'Text45x40', Type = 'Mark'},
-   { On = true, Name = 'TextPenna', Type = 'Text'},
-   { On = true, Name = 'TextPenna_AT', Type = 'Text_AT'},
-   { On = true, Name = 'Text45x40', Type = 'Decor01'},
-   { On = true, Name = 'Mill_L2C100x60', Type = 'Long2Cut'},
-   { On = true, Name = 'Mill_L2CD25x130', Type = 'Long2CutDown'},
-   { On = false, Name = 'Mill_L2CD100x60', Type = 'Long2CutDown'},
-   { On = true, Name = 'Mill_L2CD25x130', Type = 'Long2CutSide'},
-   { On = true, Name = 'Mill_L2CD100x60', Type = 'Long2CutSide'},
-   { On = true, Name = 'Milling25x130', Type = 'LongSmallCut'},
-   { On = true, Name = 'Milling240x20x195', Type = 'BHSideMill'},
-   { On = true, Name = 'MillOnSideBH', Type = 'BHSideMill'},
-   { On = true, Name = 'FreeCont25x130', Type = 'SmallToolContour'},
-   { On = true, Name = 'Milling10x50', Type = 'SmallToolContour'},
-   { On = true, Name = 'Milling25x130', Type = 'AntiSplintMillCut'},
-   { On = true, Name = 'Clean35x40', Type = 'CleanCorner'},
-   { On = true, Name = 'Mill_DTCone125x160', Type = 'ProfTCone'}
-}
-
----------------------------------------------------------------------
-return MillingData

Beam/PocketingData.lua

@@ -1,22 +0,0 @@
--- PocketingData.lua by Egaltech s.r.l.   06/11/2023 12:45:01
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local PocketingData = {
-   { On = true, Name = 'Svuot100x60', Type = 'OpenPocket'},
-   { On = false, Name = 'Svuot100x150', Type = 'OpenPocket'},
-   { On = true, Name = 'Svuot60x80', Type = 'OpenPocket'},
-   { On = false, Name = 'Svuot35x70', Type = 'OpenPocket'},
-   { On = true, Name = 'Svuot20x50', Type = 'OpenPocket'},
-   { On = true, Name = 'Svuot25x130', Type = 'OpenPocket'},
-   { On = true, Name = 'Svuot20x100_AT', Type = 'OpenPocket_AT'},
-   { On = false, Name = 'Svuot35x70', Type = 'Pocket'},
-   { On = true, Name = 'Svuot20x50', Type = 'Pocket'},
-   { On = true, Name = 'Svuot25x130', Type = 'Pocket'},
-   { On = true, Name = 'Svuot20x100_AT', Type = 'Pocket_AT'},
-   { On = true, Name = 'Mortiser38.89x130', Type = 'Mortise'},
-   { On = true, Name = 'Svuot20x100_AT', Type = 'Mortise_AT'}
-}
-
----------------------------------------------------------------------
-return PocketingData

Beam/SawingData.lua

@@ -1,11 +0,0 @@
--- SawingData.lua by Egaltech s.r.l.   31/07/2022 20:04:48
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local SawingData = {
-   { On = true, Name = 'TaglioCatena', Type = 'Sawing'},
-   { On = true, Name = 'Mortasatura', Type = 'Mortising'}
-}
-
----------------------------------------------------------------------
-return SawingData

Beam/Ts3Data.bak

@@ -1,53 +0,0 @@
-local Offsets = {
-   YCARICO=-1456.85,
-   YSCARICO=1700,
-   OFFSETRIB=200,
-   PARKYY=480,
-   PARKVV=-480,
-   PIVOTFRESA=-176.965,
-   PIVOTLAMA=241.61,
-   OFFSETX=-900.45,
-   OFFSETZ=-1011.4,
-   MIN_X=-1350,
-   MAX_X=0,
-   MIN_Y=110,
-   MAX_Y=3735,
-   MIN_Z=-1350,
-   MAX_Z=0,
-   MIN_B=-180,
-   MAX_B=360,
-   MIN_C=-360,
-   MAX_C=360,
-   MIN_V=-3735,
-   MAX_V=-110,
-   TIPO_CN=1,
-   OFFSETCLAMA=0,
-   OFFSETBLAMA=0,
-   RIBCAR=0,
-   SECSUP=0,
-   BLOCKHAUS=0,
-   NOULOAD=0,
-   OFFSETX_RINV_1=150,
-   OFFSETZ_RINV_1=346.965,
-   OFFSETX_RINV_2=150,
-   OFFSETZ_RINV_2=346.965,
-   MIN_JOIN_SS = 200,
-}
-
-local Trave = {
-   XMIN=30,
-   XMAX=300,
-   ZMIN=30,
-   ZMAX=625,
-}
-
-local User = {
-   OPTIMIZATIONS_ENABLE_SLICES_F5=1,
-   OPTIMIZATIONS_ENABLE_SLICES_F6=1,
-   OPTIMIZATIONS_LENGTH_SLICES=100,
-   L020_DIAM_HOLE=14,
-   L040_OFFSET_P1=0,
-}
-
-local Machine = { Offsets=Offsets, Trave=Trave, User=User}
-return Machine

Beam/Ts3Data.lua

@@ -1,57 +0,0 @@
-local Offsets = {
-   YCARICO=-1456.85,
-   YSCARICO=1700,
-   OFFSETRIB=200,
-   PARKYY=480,
-   PARKVV=-480,
-   PIVOTFRESA=-176.965,
-   PIVOTLAMA=241.61,
-   OFFSETX=-900.45,
-   OFFSETZ=-1011.4,
-   MIN_X=-1350,
-   MAX_X=0,
-   MIN_Y=110,
-   MAX_Y=3735,
-   MIN_Z=-1350,
-   MAX_Z=0,
-   MIN_B=-180,
-   MAX_B=360,
-   MIN_C=-360,
-   MAX_C=360,
-   MIN_V=-3735,
-   MAX_V=-110,
-   TIPO_CN=1,
-   OFFSETCLAMA=0,
-   OFFSETBLAMA=0,
-   RIBCAR=0,
-   SECSUP=0,
-   BLOCKHAUS=0,
-   NOULOAD=0,
-   OFFSETX_RINV_1=150,
-   OFFSETZ_RINV_1=346.965,
-   OFFSETX_RINV_2=150,
-   OFFSETZ_RINV_2=346.965,
-   MIN_JOIN_SS=100,
-   PRECUT_HEAD_DISABLE=0,
-   PRECUT_TAIL_DISABLE=0,
-   MIN_HEIGHT_ADDED_CUTS=400
-}
-
-local Trave = {
-   XMIN=30,
-   XMAX=300,
-   ZMIN=30,
-   ZMAX=625,
-}
-
-local User = {
-   OPTIMIZATIONS_ENABLE_SLICES_F5=1,
-   OPTIMIZATIONS_ENABLE_SLICES_F6=1,
-   OPTIMIZATIONS_LENGTH_SLICES=100,
-   L020_DIAM_HOLE=14,
-   L040_OFFSET_P1=0,
-   ENABLE_TOOL_BETWEEN_VICES=0,
-}
-
-local Machine = { Offsets=Offsets, Trave=Trave, User=User}
-return Machine

SetUp/Standard.stu

@@ -1,15 +0,0 @@
-; Commento per evitare BOM con UTF-8
-[General]
-Pos1=T1;H1;1/D077C810-A58B-41DE-A3F5-D2187EBB1B67/Fresa100x60
-Pos2=T2;H1;1/0A54F32E-C48D-45DB-8502-953CA94FD7A0/Fresa25x130
-Pos3=T3;H1;1/877C9B3A-9078-42B6-808D-5ED5CF5C505B/Fresa20x50
-Pos4=T4;H1;1/5BC80CC4-B497-4509-981C-C7593EC1279F/FresaDT35x130
-Pos5=T5;H1;1/E49D40F3-E08A-4053-AA30-BF9FECCDA6FC/Fresa240x20x195
-Pos6=T6;H1;1/9EA5B450-B81B-4B8F-860B-C3B8D48310F3/Fresa30x160
-Pos7=T7;H1;1/0150315A-41DF-4916-AC88-338C1EF375EF/Penna
-Pos8=T8;H1;1/A9E87E22-71BF-44F9-B72A-4623BD96AA32/PuntaD06
-Pos9=T9;H1;1/0147ED47-EB5D-44D6-9CE2-5282B484B5BD/Smusso45x40
-Pos10=T10;H1;1/0C3199C0-5E96-4512-A06B-EECE879330BF/Fresa10x50
-Pos11=T11;H1;1/57898FF3-0FCA-4185-B40F-2318E501260A/PuntaD18
-Pos12=T42;H2;1/6CB00A83-DDCD-49E6-A301-E1A0482615CA/Lama620
-Pos13=T101;H3;1/A6CFDA65-DABB-441E-990A-776B5C24C2E4/ChainSaw

SetUp/TASCHE.stu

@@ -1,15 +0,0 @@
-; Commento per evitare BOM con UTF-8
-[General]
-Pos1=T1;H1;1/D077C810-A58B-41DE-A3F5-D2187EBB1B67/Fresa100x60
-Pos2=T2;H1;1/0A54F32E-C48D-45DB-8502-953CA94FD7A0/Fresa25x130
-Pos3=T3;H1;1/877C9B3A-9078-42B6-808D-5ED5CF5C505B/Fresa20x50
-Pos4=T4;H1;1/E7F6A2BB-1F66-48B9-9561-496231C33403/FresaDT60x146
-Pos5=T5;H1;1/0147ED47-EB5D-44D6-9CE2-5282B484B5BD/Smusso45x40
-Pos6=T6
-Pos7=T7
-Pos8=T8;H1;1/B5B974EF-D18A-45DE-9842-05B91639BE91/PuntaD14
-Pos9=T9;H1;1/BD98DE4D-F741-4A38-980C-DD188BBE3988/Fresa34x175
-Pos10=T10;H1;1/82505C4D-26F2-4197-824F-25129D782E2D/PuntaD20
-Pos11=T11;H1;1/57898FF3-0FCA-4185-B40F-2318E501260A/PuntaD18
-Pos12=T42;H2;1/6CB00A83-DDCD-49E6-A301-E1A0482615CA/Lama620
-Pos13=T101;H3;1/A6CFDA65-DABB-441E-990A-776B5C24C2E4/ChainSaw