eliminati file non git

SetUp/Standard.stu

@@ -1,14 +0,0 @@
-; Commento per evitare BOM con UTF-8
-[General]
-Pos1=T9;H1;1/C24D419A-4196-4A93-A392-AB60F7C21FA9/Fresa20x50
-Pos2=T1;H2;1/B68769CD-E781-4A6E-B8E8-25DABB823898/Lama450
-Pos3=T2
-Pos4=T3
-Pos5=T4;H1;1/0A54F32E-C48D-45DB-8502-953CA94FD7A0/Fresa14.5x100
-Pos6=T5;H1;1/0D83BA50-5D8F-4831-8EEF-CD2BCF6E21F2/Fresa200
-Pos7=T6
-Pos8=T7;H1;1/EC758B83-51D2-4247-B406-C13581AAC5C5/PuntaD18
-Pos9=T8;H1;1/B449357F-293E-4EDC-8EE4-127A9863F116/PuntaD12
-Pos10=T10;H1;1/B758356D-D1A5-4DA7-A0BC-65F59CA1DA24/Fresa25x130
-Pos11=T11;H11;1/C6F17A98-329D-410A-A339-51059CCE1A83/11
-Pos12=T12;H12;1/7EAAE1B6-0429-4074-A4E5-3E897BEEF424/12

Wall/CutData.lua

@@ -1,12 +0,0 @@
--- CutData.lua by Egaltech s.r.l.   05/07/2022 19:29:52
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local CutData = {
-   { On = false, Name = 'Cutting300', Type = 'Standard'},
-   { On = true, Name = 'Cutting300Pull', Type = 'Standard'},
-   { On = true, Name = 'Cutting450', Type = 'Standard'}
-}
-
----------------------------------------------------------------------
-return CutData

Wall/DrillData.lua

@@ -1,19 +0,0 @@
--- DrillData.lua by Egaltech s.r.l.   04/03/2022 16:10:20
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local DrillData = {
-   { On = true, Name = 'DrillD7', Type = 'Drill'},
-   { On = true, Name = 'DrillD14', Type = 'Drill'},
-   { On = true, Name = 'DrillD16', Type = 'Drill'},
-   { On = true, Name = 'DrillD18', Type = 'Drill'},
-   { On = true, Name = 'DrillD20', Type = 'Drill'},
-   { On = true, Name = 'DrillD32', Type = 'Drill'},
-   { On = false, Name = 'DrillD35', Type = 'Drill'},
-   { On = true, Name = 'DrillPockD20', Type = 'Pocket'},
-   { On = true, Name = 'DrillPockD25', Type = 'Pocket'},
-   { On = true, Name = 'DrillPockD40X120', Type = 'Pocket'}
-}
-
----------------------------------------------------------------------
-return DrillData

Wall/MillingData.lua

@@ -1,18 +0,0 @@
--- MillingData.lua by Egaltech s.r.l.   24/05/2022 08:41:12
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local MillingData = {
-   { On = true, Name = 'Milling200x63', Type = 'Side'},
-   { On = true, Name = 'MillingBH', Type = 'SideGroove'},
-   { On = true, Name = 'Milling25x130', Type = 'FreeContour'},
-   { On = true, Name = 'Milling20x50', Type = 'FreeContour'},
-   { On = true, Name = 'Clean60x40', Type = 'CleanCorner60'},
-   { On = true, Name = 'Clean30x40', Type = 'CleanCorner30'},
-   { On = true, Name = 'Text45x40', Type = 'Text'},
-   { On = true, Name = 'Nailing_11', Type = 'Nailing'},
-   { On = true, Name = 'Nailing_12', Type = 'Nailing'}
-}
-
----------------------------------------------------------------------
-return MillingData

Wall/PocketingData.lua

@@ -1,15 +0,0 @@
--- PocketingData.lua by Egaltech s.r.l.   02/05/2022 09:25:48
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local PocketingData = {
-   { On = true, Name = 'Svuot20x50', Type = 'Pocket'},
-   { On = true, Name = 'Svuot100x60', Type = 'Pocket'},
-   { On = true, Name = 'Svuot25x130', Type = 'Pocket'},
-   { On = true, Name = 'Svuot40x120', Type = 'Pocket'},
-   { On = true, Name = 'Svuot20x50', Type = 'OpenPocket'},
-   { On = true, Name = 'Svuot25x130', Type = 'OpenPocket'}
-}
-
----------------------------------------------------------------------
-return PocketingData

Wall/SawingData.lua

@@ -1,10 +0,0 @@
--- SawingData.lua by Egaltech s.r.l.   14/12/2021 16:37:13
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local SawingData = {
-   { On = true, Name = 'TaglioCatena', Type = 'Sawing'}
-}
-
----------------------------------------------------------------------
-return SawingData

Wall/Ts3Data.lua

@@ -1,233 +0,0 @@
--- C:\TechnoEssetre7\EgtData\Essetre-Wall_XS0014.data
-
-local Offsets = {
-   MIN_X=-3900,
-   MAX_X=45,
-   MIN_Y=-22010,
-   MAX_Y=0.1,
-   MIN_Z=-875,
-   MAX_Z=0,
-   MIN_B=-120,
-   MAX_B=120,
-   MIN_C=-360,
-   MAX_C=360,
-   TIPO_CN=1,
-   ZERO_X=-192.5,
-   ZERO_Y=-1033.3,
-   ZERO_Z=-781.4,
-   PIVOT=92.9,
-   OFFSET_ZERO3_X=0,
-   OFFSET_ZERO3_Y=-9013.3,
-   OFFSET_ZERO3_Z=0,
-   ZERO_NAIL11_X=-455.0,
-   ZERO_NAIL11_Y=-722.0,
-   ZERO_NAIL11_Z=-573.7,
-   ZERO_NAIL12_X=72,
-   ZERO_NAIL12_Y=-716,
-   ZERO_NAIL12_Z=-569.5,
-   CHAIN_SAW=0,
-   NAIL11=1,
-   NAIL12=1,
-   DELTA_X=0,
-   OFFSET_ZERO11_X=-5.9,
-   OFFSET_ZERO11_Y=-11639.8,
-   OFFSET_ZERO11_Z=0,
-   OFFSET_ZERO13_X=-5.9,
-   OFFSET_ZERO13_Y=-20655.7,
-   OFFSET_ZERO13_Z=0,
-   Zzz=1
-}
-
-local Trave = {
-   XMIN=10,
-   XMAX=3590,
-   YMIN=50,
-   YMAX=9350,
-   ZMIN=1,
-   ZMAX=400,
-   ZMAX_LAYERS=400,
-   Zzz=1
-}
-
-local User = {
-   VELOCITA_VELOCITARAPIDOFRESE=10000,
-   VELOCITA_VELOCITA_USCITA_LAMA=20000,
-   VELOCITA_FEED_ENTRY=5000,
-   VELOCITA_FEED_EXIT=20000,
-   NESTING_MATERIAL=1,
-   NESTING_TYPEEXTERNALOP=1,
-   NESTING_FROM_BTL=1,
-   NESTING_ORDINA=1,
-   NESTING_NOCOMPAT=0,
-   PROFILES_PROF_SMUSSO=5,
-   PAUSE_ACTIVE_PAUSE=0,
-   SAFETY_DISTANCE_ZSAVE=40,
-   OPTIMIZATIONS_ENABLE_SLICES_F5=0,
-   OPTIMIZATIONS_LENGTH_MAX_SCRAP_F5=799,
-   OPTIMIZATIONS_LENGTH_MAX_SCRAP_F5_P5=1350,
-   OPTIMIZATIONS_ENABLE_SLICES_F6=0,
-   OPTIMIZATIONS_LENGTH_SLICES=150,
-   OPTIMIZATIONS_SYMMETRIC_HEADS_PF=0,
-   OPTIMIZATIONS_RECOVERY_PRINT_ONLY=1,
-   L056_DISTSICUR=5,
-   L056_ENTRY_SPLINTER=10,
-   L056_ACTIVE_AS=1,
-   L055_ADD_P13=0,
-   L055_MODSAG=1,
-   L055_DISTSICUR=20,
-   L055_ENTRY_SPLINTER=20,
-   L055_TOLL_W=0,
-   L055_ACTIVE_AS=1,
-   L051_FORCE_P4=0,
-   L050_ATTIVA_CICLO_L050=0,
-   L050_FORCE_P4=0,
-   L050_ISOOUTSVUOTA=1,
-   L050_ADDDEPTH=0,
-   L050_DIAM_LUNG=1,
-   L050_USE2HEAD=0,
-   L053_ISOOUTSVUOTA=2,
-   L053_DIAM_LUNG=1,
-   L060_PEN_F2=2,
-   L060_PEN_F1=2,
-   L060_ORTHO_WRITER=0,
-   L060_ORTHO_WRITER_ADD_Y=0,
-   L060_DISABLE_L060=0,
-   L060_PEN_POSITION=0,
-   L101_MANUAL_POSITIONING=0,
-   L102_MANUAL_POSITIONING=0,
-   L103_MANUAL_POSITIONING=0,
-   L103_RID_SCALA_SMUSSO=5,
-   L103_ADD_WIDTH=0,
-   L103_ADD_WIDTH_CHAMFER=0,
-   L106_MANUAL_POSITIONING=0,
-   L106_RANGE=0,
-   L106_ADD_WIDTH=0,
-   L106_ASL=0,
-   L106_ASL_DEPTH=0,
-   L138_TOLLERANZA=0,
-   L052_ATTIVA_CICLO_MASCHIO=2,
-   L052_RIDLARGL052=0,
-   L052_REDUCTION=0,
-   L037_FEED_1=2000,
-   L037_FEED_2=4000,
-   L037_FEED_3=3000,
-   L037_MIN_LENGTH_ROT_AXE_A=130,
-   L037_TOOL_WIDTH=0,
-   L034_CHAMFER=0,
-   L034_FEED_CHAMFER=3000,
-   L034_PROF_AS=180,
-   L034_USE_SAW=19,
-   L034_LENGTH_MIN_DIV=900,
-   L032_ADD_P13=0,
-   L032_LENGTH_MIN_DIV=900,
-   T055_DISTSICURTENON=5,
-   T055_RIDP11=1,
-   T055_RIDLARGT055=0,
-   T055_ACTIVE_AS=1,
-   T055_ADDP15=0,
-   T050_REDUCTION=2,
-   T050_RIDLARGT050=0,
-   T050_RIDALTET050=0,
-   T050_FORCE_P4=0,
-   T050_ATTIVA_CICLO_MASCHIO=0,
-   T050_FEED_ENTRY=1500,
-   L040_ADD_P11=1,
-   L040_ADD_P11_PASS=0,
-   L040_OFFSET_P1=-1,
-   L040_OFFSET_P1_MAX_DISTANCE=0,
-   L040_2_DRILLINGS=0,
-   L040_TYPEDRILLING=1,
-   L040_USE2HEAD=0,
-   L017_ATTIVA_CICLO_MASCHIO=0,
-   L017_USAMORTASA_TURN=0,
-   L017_USAMORTASA=0,
-   L017_USE_SAW=0,
-   L017_GLOBAL_CUT=0,
-   L017_P7MAGG90=0,
-   L017_DIAM_LUNG=1,
-   L012_ENABLE_180=0,
-   L012_LIM=1,
-   L012_WORK_F1=0,
-   L012_MM_WORK_F1=0,
-   L012_LENGTH_MIN_DIV=900,
-   L012_USCITA_COMPLUVIO=0,
-   L012_ALT_MAX_LAMA=361,
-   L010_ENABLE_180=0,
-   L010_LIM=0,
-   L010_MM_SLICES=150,
-   L010_LONGITUDINAL_CYCLE=0,
-   L010_LENGTH_MIN_DIV=900,
-   L010_ALT_MAX_LAMA=361,
-   L016_CYCLE_ZPASS=0,
-   L016_USAMORTASA=0,
-   L016_LENGTH_MIN_DIV=2000,
-   L020_DIAM_HOLE=0,
-   L020_OFFSET_P1=0,
-   L020_MANUAL_POSITIONING=0,
-   L020_DIAM_HOLE_INV=0,
-   L020_DOUBLE_HOLE=1,
-   L020_ANTISCHEGGIA_LAMA=0,
-   L020_ALTMAXLAMA=360,
-   L030_NO_CAT_FIN=1,
-   L030_AUM_DIM=0,
-   L030_USE_ONLY_MILLER=0,
-   L030_PAUSE_PARETI=2,
-   L030_DELTA_PORTALE=500,
-   L030_ANTISCHEGGIA_FRESA=0,
-   L030_ANTISCHEGGIA_LAMA=0,
-   L030_ANTISCHEGGIA_LIMITE_MINIMO=0,
-   L030_USE_BIG_MILLER=1,
-   L030_MAX_HAUTEUR_OUTIL_203=350,
-   L030_MAX_LARGEUR_OUTIL_203=250,
-   L030_OFFSET_P1_OUTIL_203=0,
-   L030_SORMONTO_TASCA=0,
-   L030_ATTIVA_CICLO_FEMMINA=0,
-   L030_DISTANCE_FOR_TOOL_TYPE_4=135,
-   L030_USE_SAW_P4_12=16,
-   L030_LENGTH_MIN_DIV=900,
-   L030_OFFSETPIANOCATENA=15,
-   T010_TYPECUT=0,
-   T010_LENGHT_SLICES=400,
-   T010_ADD_EXIT_ORIZZ=26,
-   T010_ADD_EXIT=26,
-   T010_DISTSICURCUT=15,
-   T010_ADD_EXIT_DOLAMA=10,
-   T010_TRONCA_DOPPIA_PENDENZA=0,
-   T010_TRONCATURA_CON_G107=1,
-   T010_DISABILITA_TRONCATURA=0,
-   T010_DOUBLE_CUT_HALF=0,
-   T010_ALT_CAMBIO_TRONCATURA_FAST=360,
-   T010_NO_START_X=0,
-   T010_DIST_INF_HEAD=110,
-   T010_ADD_ENTRY_CUT=20,
-   T010_USACATENA=1,
-   T010_ALTCATENA=362,
-   T010_USA_TRUCIOLATORE=1,
-   T010_OFFSETPIANOCATENA=20,
-   T010_DISABLE_MILLING_AFTER_DIVISION=0,
-   T010_SAFETY_DISTANCE=5,
-   T010_ROT_C_SAW=700,
-   T010_FEED_ENTRY_SAW=4900,
-   T010_USASEMPRECATENA=0,
-   T010_T010ORIZZFINITURA=0,
-   T010_TAGLLAT=0,
-   P010_DEPTH=6,
-   P011_DISTSICURTENON=5,
-   P011_RIDLARGT055=0,
-   P011_RIDP11=2,
-   P011_ACTIVE_AS=1,
-   L038_ACTIVE_CUT=1,
-   L036_LENGTH_MIN_DIV=900,
-   T138_OFFSETTIMBERLAKE=0,
-   WUP_LAVSOLOEST=1,
-   T030_LENGTH_MIN_DIV=500,
-   T030_ANGMAXINF=15,
-   L013_LENGTH_MIN_DIV=2000,
-   P003_ALT_MAX_LAMA=440,
-   P003_OFFSETPIANOCATENA=0,
-   T080_ALTCATENA=399,
-   Zzz=1
-}
-
-local Machine = { Offsets=Offsets, Trave=Trave, User=User}
-return Machine