Versione con gestione parametri HCING e TCING settabili su tutte le lavorazioni

- piccola modifica a nuovo calcolo step per Vmill.

Common_FAST.NUM.mlpe

@@ -1532,7 +1532,10 @@ function MyAdjustLinearAxes()
 
    if EMT.REFLOC then
       local vtE
-      if EMT.HEAD ~= 'H3' then
+      -- su NUM aggregati non gestiti
+      if EMT.HEAD == 'H5' or EMT.HEAD == 'H6' or EMT.HEAD == 'H7' then
+         EmtSetLastError( 1211, "Aggregates not managed")
+      elseif EMT.HEAD ~= 'H3' then
          local Len = EMT.TLEN + EgtIf( EMT.HEAD == 'H1', MillOffs, abs( SawOffs))
          local LenRef = MillOffs
          vtE = Vector3d( EMT.EXTR) * Len - Z_AX() * LenRef

Common_FAST.NUM_PLUS.mlpe

@@ -493,7 +493,7 @@ function OnMachiningEnd()
    end
    for i = 1, #EMT.AUXSTR do
       local sOut = EMT.AUXSTR[i]
-      if EMT.AUXTYPE == 'S' then
+      if EMT.AUXTYPE == 'S' and sOut:find( 'G101 ') then
          sOut = sOut .. ' EH1'
       elseif EMT.AUXTYPE == 'U' and not EMT.CHY_ON and not sOut:find( 'ET') then
          sOut = sOut .. ' ET2'

Common_FAST.mlpe

@@ -213,20 +213,24 @@ function OnSimulDispositionStart()
                end
             end
             -- determino la risoluzione dello Zmap
-            local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
             local dTol = 4.71
-            if dArea < CoeffVM * 0.15e6 then
+            if EmtGetVMillStep then
-               dTol = 0.71
+               dTol = EmtGetVMillStep( b3Raw:getDimX(), b3Raw:getDimY(), b3Raw:getDimZ(), 4.71)
-            elseif dArea < CoeffVM * 0.3e6 then
+            else
-               dTol = 1.01
+               local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
-            elseif dArea < CoeffVM * 0.6e6 then
+               if dArea < 0.075e6 then
-               dTol = 1.51
+                  dTol = 0.71
-            elseif dArea < CoeffVM * 1.2e6 then
+               elseif dArea < 0.15e6 then
-               dTol = 1.97
+                  dTol = 1.01
-            elseif dArea < CoeffVM * 2.4e6 then
+               elseif dArea < 0.3e6 then
-               dTol = 2.81
+                  dTol = 1.51
-            elseif dArea < CoeffVM * 4.8e6 then
+               elseif dArea < 0.6e6 then
-               dTol = 3.77
+                  dTol = 1.97
+               elseif dArea < 1.2e6 then
+                  dTol = 2.81
+               elseif dArea < 2.4e6 then
+                  dTol = 3.77
+               end
             end
             -- creo lo Zmap
             local VMillId = EgtVolZmapBox( nPartRawId, b3Raw:getMin(), b3Raw:getDimX(), b3Raw:getDimY(), b3Raw:getDimZ(), dTol, true, GDB_RT.GLOB)
@@ -1129,18 +1133,19 @@ end
 ---------------------------------------------------------------------
 --   *** ESTIMATION T&L ***
 ---------------------------------------------------------------------
-local RAPID_X_FEED =  75000    -- mm/min
+local ESTIMATION_RAPID_COEFF = EstimationRapidMultiplier or 1
-local RAPID_Y_FEED = 100000    -- mm/min
+local RAPID_X_FEED =  75000 / ESTIMATION_RAPID_COEFF    -- mm/min
-local RAPID_Z_FEED =  50000    -- mm/min
+local RAPID_Y_FEED = 100000 / ESTIMATION_RAPID_COEFF    -- mm/min
-local RAPID_C_FEED =  15000    -- deg/min
+local RAPID_Z_FEED =  50000 / ESTIMATION_RAPID_COEFF    -- mm/min
-local RAPID_B_FEED =  15000    -- deg/min
+local RAPID_C_FEED =  15000 / ESTIMATION_RAPID_COEFF    -- deg/min
-local RAPID_MIN_T = 0.1        -- s
+local RAPID_B_FEED =  15000 / ESTIMATION_RAPID_COEFF    -- deg/min
-local LOAD_T = 2               -- s
+local RAPID_MIN_T = 0.1 * ESTIMATION_RAPID_COEFF       -- s
-local CHAR_ONE_MOVE_T = 1      -- s
+local LOAD_T = 2  * ESTIMATION_RAPID_COEFF              -- s
-local ROTATION_T = 40          -- s
+local CHAR_ONE_MOVE_T = 1  * ESTIMATION_RAPID_COEFF     -- s
-local SPLIT_T = 6              -- s
+local ROTATION_T = 40  * ESTIMATION_RAPID_COEFF         -- s
-local UNLOAD_T = 4             -- s
+local SPLIT_T = 6  * ESTIMATION_RAPID_COEFF             -- s
-local FALL_T = 2               -- s
+local UNLOAD_T = 4  * ESTIMATION_RAPID_COEFF            -- s
+local FALL_T = 2  * ESTIMATION_RAPID_COEFF              -- s
 
 ---------------------------------------------------------------------
 function OnEstimStart()

Common_FAST.mlse

@@ -33,9 +33,9 @@ local DeltaTol = DELTA_TOL_S
 local DELTA_SIC = 1
 local AGG_LOAD = 50
 local MIN_JOIN_VV = EgtClamp( MinJoinVV or 75, 60, 150)
-local MIN_JOIN_SS = EgtClamp( MinJoinSS or 100, 80, 200)
+local MIN_JOIN_SS = EgtClamp( MinJoinSS or 100, 80, 275)
 local MIN_JOIN_LS = EgtClamp( MinJoinLS or 290, 250, 400)
-local MIN_JOIN_SL = EgtClamp( MinJoinSL or 100, 80, 200)
+local MIN_JOIN_SL = EgtClamp( MinJoinSL or 100, 80, 400)
 local MIN_JOIN_LL = EgtClamp( MinJoinLL or 400, 300, 600)
 local MinJoin = MIN_JOIN_SS
 local MinOther = abs( MinY) + abs( MaxV) + MinJoin
@@ -368,6 +368,17 @@ function OnSpecialApplyDisposition()
    EMC.HCING = EgtGetInfo( nCurrRawId, 'HCING', 'd') or 0
    EMC.TCING = EgtGetInfo( nCurrRawId, 'TCING', 'd') or 0
 
+   -- correggo area non pinzabile in testa o coda in base alle info sulla lavorazione
+   local sNotes = EgtGetMachiningParam( MCH_MP.USERNOTES) or ''
+   local dHCING = tonumber( EgtGetValInNotes( sNotes, 'HCING'))
+   if dHCING then
+      EMC.HCING = max( dHCING, -50)
+   end
+   local dTCING = tonumber( EgtGetValInNotes( sNotes, 'TCING'))
+   if dTCING then
+      EMC.TCING = max( dTCING, -50)
+   end
+
    -- Devo scaricare il pezzo o il grezzo rimasto
    -- Posizione trave
    local dPosT
@@ -511,6 +522,17 @@ function OnPostApplyMachining()
    local bSplitting = ( sNotes:find( 'Split') ~= nil)
    local bPreCut = ( sNotes:find( 'Precut') ~= nil)
    local bCutting = ( sNotes:find( 'Cut') ~= nil)
+
+   -- correggo area non pinzabile in testa o coda in base alle info sulla lavorazione
+   local dHCING = tonumber( EgtGetValInNotes( sNotes, 'HCING'))
+   if dHCING then
+      EMC.HCING = max( dHCING, -50)
+   end
+   local dTCING = tonumber( EgtGetValInNotes( sNotes, 'TCING'))
+   if dTCING then
+      EMC.TCING = max( dTCING, -50)
+   end
+
    local bUnload = IsEndPhase( EMC.PHASE) or IsEnd2Phase( EMC.PHASE)
    if bPreSplit or bPreCut then
       EgtSetInfo( EMC.MCHID, 'IS_PRE', '1')
@@ -635,6 +657,17 @@ function SpecApplyPath( bPreSplit, bSplitting, bPreCut, bCutting, bUnload, bPreR
    EMC.HCING = EgtGetInfo( nCurrRawId, 'HCING', 'd') or 0
    EMC.TCING = EgtGetInfo( nCurrRawId, 'TCING', 'd') or 0
    
+   -- correggo area non pinzabile in testa o coda in base alle info sulla lavorazione
+   local sNotes = EgtGetMachiningParam( MCH_MP.USERNOTES)
+   local dHCING = tonumber( EgtGetValInNotes( sNotes, 'HCING'))
+   if dHCING then
+      EMC.HCING = max( dHCING, -50)
+   end
+   local dTCING = tonumber( EgtGetValInNotes( sNotes, 'TCING'))
+   if dTCING then
+      EMC.TCING = max( dTCING, -50)
+   end
+
    -- Calcolo dell'ingombro della lavorazione
    local dDistFront, dDistBack = SpecialCalcMachiningEncumbrance( EMC.MCHID, bPreCut)
    if not dDistFront or not dDistBack then return end
@@ -1682,7 +1715,7 @@ function SpecAdjustCarriages( vCmd, dTPosI, dYDeltaI, dVDeltaI, dTPosF, dYDeltaF
             if abs( dYDeltaF - dYDeltaI) > 10 * GEO.EPS_SMALL then
                table.insert( vCmd, { 11, 0})
                dYPosA = max( MyMinY, dTPosI + dYDeltaF)
-               dTPosA = -( dYPosA + dVDeltaF)
+               dTPosA = dYPosA - dYDeltaF
                dVPosA = dTPosA + dVDeltaF
                table.insert( vCmd, { 3, 'Y', dYPosA , 'T', dTPosA, 'V', dVPosA})
                table.insert( vCmd, { 11, CalcCharStatus( 'Y', dYDeltaF)})

Essetre-FAST.ini

@@ -68,10 +68,14 @@ Milling=1
 Pocketing=1
 Mortising=1
 Chiseling=0
-SawRoughing=0
-SawFinishing=0
 GenMachining=0
-SurfFinishing=0
+SurfRoughing=1
+SurfFinishing=1
+5AxMilling=1
+
+[5AxMilling]
+5AxScript1=5AxProject
+5AxScript2=5AxPocketProject
 
 [Machining]
 InitScript=InitMach.lua

Essetre-FAST.mlde

@@ -1,4 +1,4 @@
--- Descrizione macchina Essetre-FAST by EgalTech s.r.l.   2024/03/28
+-- Descrizione macchina Essetre-FAST by EgalTech s.r.l.   2024/12/23
 -- 2021/12/29 DS ver 2.3l4 Per NUM non va considerato MillOffs negli offset in Z.
 -- 2022/01/27 DS ver 2.4a2 Modifiche per tagli testa/coda su pezzi alti.
 -- 2022/02/10 DS ver 2.4a3 Ridotto di 10mm pinzaggio con pezzi alti ma sottili.
@@ -24,8 +24,8 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.6l1'
+PP_VER = '2.7a3_DEV1'
-PP_NVER = '2.6.12.1'
+PP_NVER = '2.7.1.3'
 MIN_MACH_VER = '2.5k1'
 MACH_NAME = 'Essetre-FAST'
 
@@ -87,10 +87,10 @@ SecondSupport = 0
 SpecialBH = false
 MaxUnloadLen = 0
 BeamHeightForFixRot = 9999                     -- per abilitare assegnare 500
-CoeffVM = 0.5
 NewTopC = true
 SafeXRotAxes = 150
 AggreBlockHaus = false
+EstimationRapidMultiplier = 1
 
 -- leggo e aggiorno con parametri da BeamData
 if BD then
@@ -159,14 +159,12 @@ if EgtExistsFile( sData) then
          if Machine.Offsets.MIN_JOIN_LL then MinJoinLL = Machine.Offsets.MIN_JOIN_LL end
          if Machine.Offsets.NEWTOPC then NewTopC = ( Machine.Offsets.NEWTOPC == 1) end
          if Machine.Offsets.AGGRE_BH then AggreBlockHaus = ( Machine.Offsets.AGGRE_BH == 1) end
+         if Machine.Offsets.COEFF_STIMATEMPI and Machine.Offsets.COEFF_STIMATEMPI > 0 then EstimationRapidMultiplier = Machine.Offsets.COEFF_STIMATEMPI end
       end
    end
 end
 if SpecialBH then SecondSupport = 0 end
 
--- TODO da rimuovere
-AggreBlockHaus = true
-
 EmtGeneral {
       File='Essetre-FAST.nge',
       Offset = Vector3d( 0, 1150.16, -1500.0),

MachNotes.ini

@@ -25,13 +25,16 @@
 
 [Chiseling]
 
-[SawRoughing]
-
-[SawFinishing]
-
 [GenMachining]
-0=l,LinTol,0.1
+
-1=l,MaxLen,2
+[SurfRoughing]
+
+[SurfFinishing]
+0=b,SkipMaxDown,1
+
+[5AxMilling]
+0=l,LinTol,0.01
+1=l,MaxLen,10
 2=s,Type,ZigZag
 3=d,SideAng,90
 4=l,Step,10
@@ -43,8 +46,3 @@
 10=l,LoOrth,0
 11=l,LoElev,0
 12=b,DirFromGuide,1
-
-[SurfRoughing]
-
-[SurfFinishing]
-0=b,SkipMaxDown,1

UpdateLog.txt

@@ -1,5 +1,16 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.7a3 (08/01/2024)
+- (GEN) Dopo separazione, in NUM_PLUS, si srive EH1 solo se macro G101, perchè altrimenti non è prevista. Ticket#2239
+
+Versione 2.7a2 (08/01/2024)
+- (MLDE-SIM) Aggiunta gestione FACOLTATIVA 'EstimationRapidMultiplier' in MLDE per regolare il tempo stimato. Se non presente in MLDE, default 1.
+- (SIM) Aggiunta gestione qualità VMILL da impostazioni macchina
+
+Versione 2.7a1 (07/01/2024)
+- (MLDE-SIM-GEN) Nuovo aggregato 90° (H7) per fresa tipo BlockHaus. Ticket#2142
+- (SIM-GEN) Aumentati limiti massimi di pinzaggio minimo
+
 Versione 2.6l1 (02/12/2024)
 - (SIM) Corretto movimento VMILL durante scarico pezzo piccolo a caduta
 - (SIM-GEN) Per decidere posizione parcheggio barra dopo separazione, si considera lunghezza coda del pezzo in lavoro per evitare collisioni. Ticket#2168

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.6l1',                 -- versione script
+   VERSION = '2.7a3',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }