diff --git a/Beam/BeamData.lua b/Beam/BeamData.lua
index 544a09e..748468c 100644
--- a/Beam/BeamData.lua
+++ b/Beam/BeamData.lua
@@ -102,8 +102,8 @@ if EgtExistsFile( sData) then
         if Machine.Offsets.PRECUT_HEAD_DISABLE then BeamData.PRECUT_HEAD = ( Machine.Offsets.PRECUT_HEAD_DISABLE == 0) end
         if Machine.Offsets.PRECUT_TAIL_DISABLE then BeamData.PRECUT_TAIL = ( Machine.Offsets.PRECUT_TAIL_DISABLE == 0) end
         if Machine.Offsets.MIN_HEIGHT_ADDED_CUTS then BeamData.MIN_HEIGHT_ADDED_CUTS = min( Machine.Offsets.MIN_HEIGHT_ADDED_CUTS, BeamData.MIN_HEIGHT_ADDED_CUTS) end
-        if Machine.Offsets.NEWCLAMPING ~= nil then BeamData.NEWCLAMPING = Machine.Offsets.NEWCLAMPING end
-        if Machine.Offsets.FASTCLAMPING ~= nil then BeamData.FASTCLAMPING = Machine.Offsets.FASTCLAMPING end
+        if Machine.Offsets.NEWCLAMPING ~= nil then BeamData.NEWCLAMPING = ( Machine.Offsets.NEWCLAMPING == 1) end
+        if Machine.Offsets.FASTCLAMPING ~= nil then BeamData.FASTCLAMPING = ( Machine.Offsets.FASTCLAMPING == 1) end
       end
       if Machine.Trave then
          BeamData.MIN_WIDTH = Machine.Trave.XMIN or BeamData.MIN_WIDTH
diff --git a/Common_FAST.NUM.mlpe b/Common_FAST.NUM.mlpe
index 07d2cf4..6f857d9 100644
--- a/Common_FAST.NUM.mlpe
+++ b/Common_FAST.NUM.mlpe
@@ -3,6 +3,7 @@
 
 -- carico librerie
 local INFO_STD_PP = require( 'Version')
+local BD = require( 'BeamData')
 
 -- Variabili di modulo
 local CSP_INFO =     INFO_STD_PP.NAME..'  ver.'..INFO_STD_PP.VERSION..' by EgalWare s.r.l.'
@@ -602,6 +603,8 @@ end
 
 ---------------------------------------------------------------------
 function OnRapid()
+   -- recupero prossimo utensile
+   EMT.NEXTTOOL, EMT.NEXTHEAD, EMT.NEXTTCPOS = FindNextTool()
    MyBackupAxes()
    -- se primo movimento della lavorazione, gestione speciale
    if EMT.MCHFIRST and not EMT.OPEISDISP then
@@ -833,6 +836,26 @@ function OnRapid()
       EmtAdjustRotaryAxes()
       EmitZmax()
       EMT.ZMAX = true
+      -- se pezzi alti e devo cambiare utensile su testa con CU, porto la testa vicino al cambio utensile
+      if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
+         local dBAxis = 90
+         local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)         
+         local sEE = ' EE3'
+         local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
+         local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
+         local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
+         local sES = ' ES'..EgtNumToString( EMT.S, 0)
+         local sOut = 'G101' .. EmtGetAxis( 'L2') .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                      ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+         sOut = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -956,6 +979,35 @@ function OnArc()
    EmtUpdatePrev()
 end
 
+---------------------------------------------------------------------
+function FindNextTool()
+   -- salvo stato iniziale
+   local CurrMachId = EgtGetCurrMachining()
+   local CurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   -- cerco lavorazione con utensile su gruppo testa indicato
+   local sTool, sHead, sTcPos
+   local OpId = EgtGetNextActiveOperation( CurrMachId or EMT.MCHID)
+   while OpId do
+      local nType = EgtGetOperationType( OpId)
+      if nType ~= MCH_OY.NONE  and  nType ~= MCH_OY.DISP then
+         if EgtSetCurrMachining( OpId) then
+            sTool = EgtGetMachiningParam( MCH_MP.TOOL)
+            if EgtTdbSetCurrTool( sTool) then
+               sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+               sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+               break
+            end
+         end
+      end
+      OpId = EgtGetNextActiveOperation( OpId)
+   end
+   -- ripristino stato iniziale
+   EgtSetCurrMachining( CurrMachId or GDB_ID.NULL)
+   EgtTdbSetCurrTool( CurrTool or '')
+   -- restituisco risultato
+   return sTool, sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 function CalcCharStatus( sCmd, bSkipPress)
    -- aperto
diff --git a/Common_FAST.NUM_PLUS.mlpe b/Common_FAST.NUM_PLUS.mlpe
index 205957f..d035f7a 100644
--- a/Common_FAST.NUM_PLUS.mlpe
+++ b/Common_FAST.NUM_PLUS.mlpe
@@ -3,6 +3,7 @@
 
 -- carico librerie
 local INFO_STD_PP = require( 'Version')
+local BD = require( 'BeamData')
 
 -- Variabili di modulo
 local CSP_INFO =     INFO_STD_PP.NAME..'  ver.'..INFO_STD_PP.VERSION..' by EgalWare s.r.l.'
@@ -642,6 +643,8 @@ end
 
 ---------------------------------------------------------------------
 function OnRapid()
+   -- recupero prossimo utensile
+   EMT.NEXTTOOL, EMT.NEXTHEAD, EMT.NEXTTCPOS = FindNextTool()
    MyBackupAxes()
    -- se primo movimento della lavorazione, gestione speciale
    if EMT.MCHFIRST and not EMT.OPEISDISP then
@@ -907,6 +910,26 @@ function OnRapid()
       EmtAdjustRotaryAxes()
       EmitZmax( false)
       EMT.ZMAX = true
+      -- se pezzi alti e devo cambiare utensile su testa con CU, porto la testa vicino al cambio utensile
+      if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
+         local dBAxis = 90
+         local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)         
+         local sEE = ' EE3'
+         local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
+         local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
+         local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
+         local sES = ' ES'..EgtNumToString( EMT.S, 0)
+         local sOut = 'G101' .. EmtGetAxis( 'L2') .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                      ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+         sOut = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -1035,6 +1058,35 @@ function OnArc()
    EmtUpdatePrev()
 end
 
+---------------------------------------------------------------------
+function FindNextTool()
+   -- salvo stato iniziale
+   local CurrMachId = EgtGetCurrMachining()
+   local CurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   -- cerco lavorazione con utensile su gruppo testa indicato
+   local sTool, sHead, sTcPos
+   local OpId = EgtGetNextActiveOperation( CurrMachId or EMT.MCHID)
+   while OpId do
+      local nType = EgtGetOperationType( OpId)
+      if nType ~= MCH_OY.NONE  and  nType ~= MCH_OY.DISP then
+         if EgtSetCurrMachining( OpId) then
+            sTool = EgtGetMachiningParam( MCH_MP.TOOL)
+            if EgtTdbSetCurrTool( sTool) then
+               sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+               sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+               break
+            end
+         end
+      end
+      OpId = EgtGetNextActiveOperation( OpId)
+   end
+   -- ripristino stato iniziale
+   EgtSetCurrMachining( CurrMachId or GDB_ID.NULL)
+   EgtTdbSetCurrTool( CurrTool or '')
+   -- restituisco risultato
+   return sTool, sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 function CalcDinamicaPinze( dH, dS, dL)
    local MinTempoAcc = 0.3                         -- [s]
diff --git a/Common_FAST.TPA.mlpe b/Common_FAST.TPA.mlpe
index e683a67..21a1020 100644
--- a/Common_FAST.TPA.mlpe
+++ b/Common_FAST.TPA.mlpe
@@ -3,6 +3,7 @@
 
 -- carico librerie
 local INFO_STD_PP = require( 'Version')
+local BD = require( 'BeamData')
 
 -- Variabili di modulo
 local CSP_INFO =     INFO_STD_PP.NAME..'  ver.'..INFO_STD_PP.VERSION..' by EgalWare s.r.l.'
@@ -625,6 +626,8 @@ end
 
 ---------------------------------------------------------------------
 function OnRapid()
+   -- recupero prossimo utensile
+   EMT.NEXTTOOL, EMT.NEXTHEAD, EMT.NEXTTCPOS = FindNextTool()
    MyBackupAxes()
    -- se primo movimento della lavorazione, gestione speciale
    if EMT.MCHFIRST and not EMT.OPEISDISP then
@@ -849,6 +852,25 @@ function OnRapid()
       EmtAdjustRotaryAxes()
       EmitZmax( true)
       EMT.ZMAX = true
+      -- se pezzi alti e devo cambiare utensile su testa con CU, porto la testa vicino al cambio utensile
+      if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
+         local dBAxis = 90
+         local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)
+         local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
+                      ' P4=' .. EgtNumToString( dBAxis, 3) .. ' P5=' .. EgtNumToString( dCAxis, 3) .. 
+                      ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
+                      ' P8=0' .. ' P9=0' .. ' P10=3'
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+         sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
+                      ' P4=' .. EgtNumToString( dBAxis, 3) .. ' P5=' .. EgtNumToString( dCAxis, 3) .. 
+                      ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
+                      ' P8=0' .. ' P9=0' .. ' P10=3'
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -992,6 +1014,35 @@ function OnArc()
    EmtUpdatePrev()
 end
 
+---------------------------------------------------------------------
+function FindNextTool()
+   -- salvo stato iniziale
+   local CurrMachId = EgtGetCurrMachining()
+   local CurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   -- cerco lavorazione con utensile su gruppo testa indicato
+   local sTool, sHead, sTcPos
+   local OpId = EgtGetNextActiveOperation( CurrMachId or EMT.MCHID)
+   while OpId do
+      local nType = EgtGetOperationType( OpId)
+      if nType ~= MCH_OY.NONE  and  nType ~= MCH_OY.DISP then
+         if EgtSetCurrMachining( OpId) then
+            sTool = EgtGetMachiningParam( MCH_MP.TOOL)
+            if EgtTdbSetCurrTool( sTool) then
+               sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+               sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+               break
+            end
+         end
+      end
+      OpId = EgtGetNextActiveOperation( OpId)
+   end
+   -- ripristino stato iniziale
+   EgtSetCurrMachining( CurrMachId or GDB_ID.NULL)
+   EgtTdbSetCurrTool( CurrTool or '')
+   -- restituisco risultato
+   return sTool, sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 function CalcDinamicaPinze( dH, dS, dL)
    local MinTempoAcc = 0.3                         -- [s]