//----------------------------------------------------------------------------
//  EgalTech 2016-2016
//----------------------------------------------------------------------------
// File : Operation.cpp       Data : 29.05.16          Versione : 1.6r7
// Contenuto : Implementazione gestione operazioni per CL.
//
//
//
// Modifiche : 29.05.16 DS Creazione modulo.
//
//
//----------------------------------------------------------------------------

//--------------------------- Include ----------------------------------------
#include "stdafx.h"
#include "DllMain.h"
#include "Operation.h"
#include "MachMgr.h"
#include "/EgtDev/Include/EGkGeoPoint3d.h"
#include "/EgtDev/Include/EGkCurveLine.h"
#include "/EgtDev/Include/EGkCurveArc.h"
#include "/EgtDev/Include/EGkGeomDB.h"
#include "/EgtDev/Include/EgtPointerOwner.h"

using namespace std ;

//----------------------------------------------------------------------------
bool
Operation::SetPathId( int nPathId)
{
   m_nPathId = nPathId ;
   return true ;
}

//----------------------------------------------------------------------------
bool
Operation::SetToolDir( const Vector3d& vtDir)
{
   m_vtTool = vtDir ;
   return ( m_vtTool.Normalize()) ;
}

//----------------------------------------------------------------------------
bool
Operation::SetCorrDir( const Vector3d& vtDir)
{
   m_vtCorr = vtDir ;
   return ( ! m_vtCorr.IsSmall()) ;
}

//----------------------------------------------------------------------------
bool
Operation::SetAuxDir( const Vector3d& vtDir)
{
   m_vtAux = vtDir ;
   return true ;
}

//----------------------------------------------------------------------------
bool
Operation::SetCorrAuxDir( const Vector3d& vtDir)
{
   m_vtCorr = vtDir ;
   m_vtAux = vtDir ;
   return ( ! m_vtCorr.IsSmall()) ;
}

//----------------------------------------------------------------------------
bool
Operation::SetFeed( double dFeed)
{
   m_dFeed = dFeed ;
   return true ;
}

//----------------------------------------------------------------------------
bool
Operation::SetFlag( int nFlag)
{
   m_nFlag = nFlag ;
   return true ;
}

//----------------------------------------------------------------------------
int
Operation::AddRapidStart( const Point3d& ptP)
{
   if ( m_pMchMgr == nullptr  ||  m_pGeomDB == nullptr)
      return GDB_ID_NULL ;
  // verifico di essere in uno stato valido per inizio
   if ( m_vtTool.IsSmall())
      return GDB_ID_NULL ;
  // creo oggetto punto per DB geometrico
   PtrOwner<IGeoPoint3d> pGP( CreateGeoPoint3d()) ;
   if ( IsNull( pGP))
      return GDB_ID_NULL ;
  // assegno le coordinate del punto
   pGP->Set( ptP) ;
  // inserisco l'oggetto nel DB geometrico
   int nId = m_pGeomDB->AddGeoObj( GDB_ID_NULL, m_nPathId, Release( pGP)) ;
   if ( nId == GDB_ID_NULL)
      return GDB_ID_NULL ;
  // creo oggetto dati Cam
   PtrOwner<CamData> pCam( new( nothrow) CamData) ;
   if ( IsNull( pCam))
      return GDB_ID_NULL ;
  // assegno valori
   pCam->SetMoveType( 0) ;
   pCam->SetToolDir( m_vtTool) ;
   pCam->SetCorrDir( m_vtCorr) ;
   pCam->SetAuxDir( m_vtAux) ;
   pCam->SetEndPoint( ptP) ;
   pCam->SetFeed( 0) ;
   pCam->SetFlag( m_nFlag) ;
  // associo questo oggetto a quello geometrico
   m_pGeomDB->SetUserObj( nId, Release( pCam)) ;
  // salvo la posizione corrente
   m_bCurr = true ;
   m_ptCurr = ptP ;
   return nId ;
}

//----------------------------------------------------------------------------
int
Operation::AddRapidMove( const Point3d& ptP)
{
   if ( m_pMchMgr == nullptr  ||  m_pGeomDB == nullptr)
      return GDB_ID_NULL ;
  // verifico di essere in uno stato valido per un movimento in rapido
   if ( ! m_bCurr  ||  m_vtTool.IsSmall())
      return GDB_ID_NULL ;
  // creo oggetto linea per DB geometrico
   PtrOwner<ICurveLine> pLine( CreateCurveLine()) ;
   if ( IsNull( pLine))
      return GDB_ID_NULL ;
  // assegno le coordinate degli estremi
   if ( ! pLine->Set( m_ptCurr, ptP))
      return GDB_ID_NULL ;
  // inserisco l'oggetto nel DB geometrico
   int nId = m_pGeomDB->AddGeoObj( GDB_ID_NULL, m_nPathId, Release( pLine)) ;
   if ( nId == GDB_ID_NULL)
      return GDB_ID_NULL ;
  // creo oggetto dati Cam
   PtrOwner<CamData> pCam( new( nothrow) CamData) ;
   if ( IsNull( pCam))
      return GDB_ID_NULL ;
  // assegno valori
   pCam->SetMoveType( 0) ;
   pCam->SetToolDir( m_vtTool) ;
   pCam->SetCorrDir( m_vtCorr) ;
   pCam->SetAuxDir( m_vtAux) ;
   pCam->SetEndPoint( ptP) ;
   pCam->SetFeed( 0) ;
   pCam->SetFlag( m_nFlag) ;
  // associo questo oggetto a quello geometrico
   m_pGeomDB->SetUserObj( nId, Release( pCam)) ;
  // salvo la posizione corrente
   m_ptCurr = ptP ;
   return nId ;
}

//----------------------------------------------------------------------------
int
Operation::AddLinearMove( const Point3d& ptP)
{
   if ( m_pMchMgr == nullptr  ||  m_pGeomDB == nullptr)
      return GDB_ID_NULL ;
  // verifico di essere in uno stato valido per un movimento lineare
   if ( ! m_bCurr  ||  m_vtTool.IsSmall()) {
      LOG_INFO( GetEMkLogger(), "Error on LinearMove : Curr or ToolDir")
      return GDB_ID_NULL ;
   }
  // se feed nulla, assegno il minimo e lo segnalo
   if ( m_dFeed < FEED_MIN) {
      m_dFeed = FEED_MIN ;
      LOG_INFO( GetEMkLogger(), "Error on LinearMove : Min Feed")
   }
  // creo oggetto linea per DB geometrico
   PtrOwner<ICurveLine> pLine( CreateCurveLine()) ;
   if ( IsNull( pLine))
      return GDB_ID_NULL ;
  // assegno le coordinate degli estremi
   if ( ! pLine->Set( m_ptCurr, ptP))
      return GDB_ID_NULL ;
  // inserisco l'oggetto nel DB geometrico
   int nId = m_pGeomDB->AddGeoObj( GDB_ID_NULL, m_nPathId, Release( pLine)) ;
   if ( nId == GDB_ID_NULL)
      return GDB_ID_NULL ;
  // creo oggetto dati Cam
   PtrOwner<CamData> pCam( new( nothrow) CamData) ;
   if ( IsNull( pCam))
      return GDB_ID_NULL ;
  // assegno valori
   pCam->SetMoveType( 1) ;
   pCam->SetToolDir( m_vtTool) ;
   pCam->SetCorrDir( m_vtCorr) ;
   pCam->SetAuxDir( m_vtAux) ;
   pCam->SetEndPoint( ptP) ;
   pCam->SetFeed( m_dFeed) ;
   pCam->SetFlag( m_nFlag) ;
  // associo questo oggetto a quello geometrico
   m_pGeomDB->SetUserObj( nId, Release( pCam)) ;
  // salvo la posizione corrente
   m_ptCurr = ptP ;
   return nId ;
}

//----------------------------------------------------------------------------
int
Operation::AddLinearMove( const Point3d& ptP, const string& sName)
{
   int nId = AddLinearMove( ptP) ;
   if ( nId != GDB_ID_NULL)
      m_pGeomDB->SetName( nId, sName) ;
   return nId ;
}

//----------------------------------------------------------------------------
int
Operation::AddArcMove( const Point3d& ptP, const Point3d& ptCen, double dAngCen, const Vector3d& vtN)
{
   if ( m_pMchMgr == nullptr  ||  m_pGeomDB == nullptr)
      return GDB_ID_NULL ;
  // verifico di essere in uno stato valido per un movimento arco
   if ( ! m_bCurr  ||  m_vtTool.IsSmall()) {
      LOG_INFO( GetEMkLogger(), "Error on ArcMove : Curr or ToolDir")
      return GDB_ID_NULL ;
   }
  // se feed nulla, assegno il minimo e lo segnalo
   if ( m_dFeed < FEED_MIN) {
      m_dFeed = FEED_MIN ;
      LOG_INFO( GetEMkLogger(), "Error on ArcMove : Min Feed")
   }
  // creo oggetto arco per DB geometrico
   PtrOwner<ICurveArc> pArc( CreateCurveArc()) ;
   if ( IsNull( pArc))
      return GDB_ID_NULL ;
  // assegno i dati dell'arco
   double dDeltaZ = ( ptP - m_ptCurr) * vtN ;
   if ( ! pArc->SetCPAN( ptCen, m_ptCurr, dAngCen, dDeltaZ, vtN))
      return GDB_ID_NULL ;
   Point3d ptFin ;
   if ( ! pArc->GetEndPoint( ptFin)  ||  ! AreSamePointApprox( ptFin, ptP))
      return GDB_ID_NULL ;
   int nMove = ( dAngCen > 0 ? 3 : 2) ;
  // inserisco l'oggetto nel DB geometrico
   int nId = m_pGeomDB->AddGeoObj( GDB_ID_NULL, m_nPathId, Release( pArc)) ;
   if ( nId == GDB_ID_NULL)
      return GDB_ID_NULL ;
  // creo oggetto dati Cam
   PtrOwner<CamData> pCam( new( nothrow) CamData) ;
   if ( IsNull( pCam))
      return GDB_ID_NULL ;
  // assegno valori
   pCam->SetMoveType( nMove) ;
   pCam->SetToolDir( m_vtTool) ;
   pCam->SetCorrDir( m_vtCorr) ;
   pCam->SetAuxDir( m_vtAux) ;
   pCam->SetEndPoint( ptP) ;
   pCam->SetCenter( ptCen) ;
   pCam->SetAngCen( dAngCen) ;
   pCam->SetNormDir( vtN) ;
   pCam->SetFeed( m_dFeed) ;
   pCam->SetFlag( m_nFlag) ;
  // associo questo oggetto a quello geometrico
   m_pGeomDB->SetUserObj( nId, Release( pCam)) ;
  // salvo la posizione corrente
   m_ptCurr = ptP ;
   return nId ;
}

//----------------------------------------------------------------------------
int
Operation::AddArcMove( const Point3d& ptP, const Point3d& ptCen, double dAngCen, const Vector3d& vtN, const string& sName)
{
   int nId = AddArcMove( ptP, ptCen, dAngCen, vtN) ;
   if ( nId != GDB_ID_NULL)
      m_pGeomDB->SetName( nId, sName) ;
   return nId ;
}

//----------------------------------------------------------------------------
bool
Operation::ResetMoveData( void)
{
   m_bCurr = false ;
   m_ptCurr = ORIG ;
   m_vtTool = V_NULL ;
   m_vtCorr = V_NULL ;
   m_vtAux = V_NULL ;
   m_dFeed = 0 ;
   m_nFlag = 0 ;
   return true ;
}