Imports System.Collections.ObjectModel
Imports System.ComponentModel
Imports System.IO
Imports EgtUILib
Imports EgtWPFLib5
Imports Ionic.zip

Public Class ProjectManagerHardwareVM
   Implements INotifyPropertyChanged

#Region "FIELDS & PROPERTIES"

   Friend m_CurrProject As Project

   ' Definizione comandi
   Private m_cmdNew As ICommand
   Private m_cmdSave As ICommand
   Private m_cmdOptions As ICommand
   Private m_cmdSendFeedback As ICommand
   Private m_cmdGuide As ICommand
   Private m_cmdDuplica As ICommand
   Private m_cmdDoor As ICommand

#Region "ToolTip"

   'Proprietà ToolTip
   Public ReadOnly Property NewToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 1)
      End Get
   End Property
   Public ReadOnly Property SaveToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 3)
      End Get
   End Property
   Public ReadOnly Property SendFeedbackToolTip As String
      Get
         Return EgtMsg(50046)
      End Get
   End Property
   Public ReadOnly Property OptionsToolTip As String
      Get
         Return EgtMsg(MSG_MAINWINDOW + 209)
      End Get
   End Property
   Public ReadOnly Property GuideToolTip As String
      Get
         Return EgtMsg(50305)
      End Get
   End Property
   Public ReadOnly Property Help As String
      Get
         Return EgtMsg(50305)
      End Get
   End Property
   Public ReadOnly Property DuplicaToolTip As String
      Get
         Return "Duplicate"
      End Get
   End Property

#End Region ' ToolTip

#End Region    ' Fields & Properties

#Region "CONSTRUCTOR"

   Sub New()
      Map.SetRefProjectManagerHardwareVM(Me)
   End Sub

#End Region    ' Constructor

#Region "COMMANDS"

#Region "NewCommand"

   ''' <summary>
   ''' Returns a command that do New.
   ''' </summary>
   Public ReadOnly Property NewCommand As ICommand
      Get
         If m_cmdNew Is Nothing Then
            m_cmdNew = New Command(AddressOf NewCmd)
         End If
         Return m_cmdNew
      End Get
   End Property

   ''' <summary>
   ''' Execute the New.  This method is invoked by the NewCommand.
   ''' </summary>
   Public Sub NewCmd()
      If Not IsNothing(Map.refHardwarePageVM.CurrHardware) Then
         ' controllo che quello che esiste sia salvato
         If Map.refHardwarePageVM.CurrHardware.SaveControl() = Hardware.SaveResult.nCancel Then Return
         ' notifico la modifica
         Map.refAssemblyManagerVM.CurrProject.SelAssemblyName.IsModified = True
         Map.refHardwarePageVM.CurrHardware.ClearGroupChapters()
         ' solo se il modello non esiste allora carico l'unico che può esistere
         Map.refHardwarePageVM.CurrHardware.TemplateName = "File Name"
         Map.refHardwarePageVM.CurrHardware.ReadChapterTemplate()
         Map.refSceneManagerVM.RefreshBtn()
         Map.refHardwarePageVM.CurrHardware.VisibilityTextTemplate = Visibility.Visible
         Map.refHardwarePageVM.CurrHardware.IsEnableType = True
      End If
   End Sub

#End Region ' NewCommand

#Region "SaveCommand"

   ''' <summary>
   ''' Returns a command that do Save.
   ''' </summary>
   Public ReadOnly Property SaveCommand As ICommand
      Get
         If m_cmdSave Is Nothing Then
            m_cmdSave = New Command(AddressOf Save)
         End If
         Return m_cmdSave
      End Get
   End Property

   ''' <summary>
   ''' Execute the Save.  This method is invoked by the SaveCommand.
   ''' </summary>
   Public Sub Save()
      If Not IsNothing(Map.refHardwarePageVM.CurrHardware) Then Map.refHardwarePageVM.CurrHardware.Save()
   End Sub

#End Region ' SaveCommand

#Region "OptionsCommand"

   ''' <summary>
   ''' Returns a command that do Export.
   ''' </summary>
   Public ReadOnly Property OptionsCommand As ICommand
      Get
         If m_cmdOptions Is Nothing Then
            m_cmdOptions = New Command(AddressOf Options)
         End If
         Return m_cmdOptions
      End Get
   End Property

   ''' <summary>
   ''' Execute the Export.  This method is invoked by the ExportCommand.
   ''' </summary>
   Public Sub Options(ByVal param As Object)
      Dim OptionsWindow As New OptionsV
      OptionsWindow.Height = 550
      OptionsWindow.Width = 650
      OptionsWindow.DataContext = New OptionsVM()
      OptionsWindow.Owner = Application.Current.MainWindow
      OptionsWindow.ShowDialog()
   End Sub

#End Region ' OptionsCommand

#Region "SendFeedbackCommand"

   ''' <summary>
   ''' Returns a command that do SendFeedback.
   ''' </summary>
   Public ReadOnly Property SendFeedbackCommand As ICommand
      Get
         If m_cmdSendFeedback Is Nothing Then
            m_cmdSendFeedback = New Command(AddressOf SendFeedback)
         End If
         Return m_cmdSendFeedback
      End Get
   End Property

   ''' <summary>
   ''' Execute the SendFeedback.  This method is invoked by the SendFeedbackCommand.
   ''' </summary>
   Public Sub SendFeedback()
      '' Recupero indirizzo a cui spedire la mail
      'Dim sSupportAddress As String = String.Empty
      'GetMainPrivateProfileString(S_GENERAL, K_SUPPORT, "support@egaltech.com", sSupportAddress)
      '' se vuoto do messaggio di errore ed esco
      'If String.IsNullOrWhiteSpace(sSupportAddress) Then
      '   MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 10), EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Error)
      '   Return
      'End If
      '' Recupero numero chiave
      'Dim sKey As String = String.Empty
      'EgtGetKeyInfo(sKey)
      '' Recupero file del progetto corrente (tipo file .nge)
      'Dim sCurrProject As String = String.Empty
      'EgtGetCurrFilePath(sCurrProject)
      '' se nome file vuoto, chiedo se si vuole salvare (file .nge)
      'If String.IsNullOrWhiteSpace(sCurrProject) Then
      '   If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
      '      Save()
      '   End If
      '   EgtGetCurrFilePath(sCurrProject)
      '   ' se modificato, chiedo se si vuole salvare
      'Else
      '   If EgtGetModified() Then
      '      If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
      '         Save()
      '      End If
      '   End If
      'End If
      '' recuro il file DDF associato al file .nge
      'Dim sCurrProjectDDF As String = String.Empty
      'sCurrProjectDDF = IniFile.m_sTempDir & "\CurrPart.ddf"
      '' recupero il file di log
      'Dim sFileLog As String = String.Empty
      'sFileLog = IniFile.m_sTempDir & "\EgtDOORCreatorLog1.txt"

      '' Creo zip file da allegare
      'Dim sZipToCreate As String = IniFile.m_sTempDir & "\Feedback.zip"
      'If File.Exists(sZipToCreate) Then
      '   File.Delete(sZipToCreate)
      'End If
      'Try
      '   Using zip As New Ionic.Zip.ZipFile(sZipToCreate, Console.Out)
      '      ' aggiungo progetto corrente .nge
      '      If File.Exists(sCurrProject) Then
      '         zip.AddItem(sCurrProject, "")
      '      End If
      '      ' aggiungo progetto corrente .ddf
      '      If File.Exists(sCurrProjectDDF) Then
      '         zip.AddItem(sCurrProjectDDF, "")
      '      End If
      '      ' aggiungo file log
      '      If File.Exists(sFileLog) Then
      '         zip.AddItem(sFileLog, "")
      '      End If
      '      ' aggiungo la cartella Doors
      '      If Directory.Exists(IniFile.m_sDoorsDirPath) Then
      '         zip.AddItem(IniFile.m_sDoorsDirPath, "Doors")
      '      End If
      '      zip.Save()
      '   End Using
      'Catch ex1 As Exception
      '   EgtOutLog("Exception in zip: " & ex1.ToString())
      'End Try

      '' preparo la mail per il supporto
      'Dim bEx As Boolean = False
      'Try
      '   Dim SendFeedbackWindow As New EgtWPFLib5.MapiMailMessage("EgtDOORCreator Feedback - " & sKey)
      '   SendFeedbackWindow.Recipients.Add(sSupportAddress)
      '   If Not String.IsNullOrWhiteSpace(sZipToCreate) AndAlso File.Exists(sZipToCreate) Then
      '      SendFeedbackWindow.Files.Add(IniFile.m_sTempDir & "\Feedback.zip")
      '   End If
      '   SendFeedbackWindow.ShowDialog()
      'Catch ex As Exception
      '   EgtOutLog("Feedback exception: " & ex.ToString)
      '   bEx = True
      'End Try
      'If bEx OrElse EgtWPFLib5.MapiMailMessage.m_ErrorCode <> 0 Then
      '   MessageBox.Show(String.Format(EgtMsg(MSG_TOPCOMMANDBAR + 12), sSupportAddress, sZipToCreate), EgtMsg(MSG_EGTDOORCREATOR + 118), MessageBoxButton.OK, MessageBoxImage.Information)
      '   ' stampo il messaggio nella StatusBar
      '   Map.refStatusBarVM.StatusOutput = EgtMsg(MSG_TOPCOMMANDBAR + 14)
      'Else
      '   ' stampo il messaggio nella StatusBar
      '   Map.refStatusBarVM.StatusOutput = EgtMsg(MSG_TOPCOMMANDBAR + 14)
      'End If
   End Sub

#End Region ' SendFeedbackCommand

#Region "Guide"
   Public ReadOnly Property GuideCommand As ICommand
      Get
         If m_cmdGuide Is Nothing Then
            m_cmdGuide = New Command(AddressOf Guide)
         End If
         Return m_cmdGuide
      End Get
   End Property

   Public Sub Guide()
      Dim GuideWindow As New GuideV(Application.Current.MainWindow, New GuideVM)
      GuideWindow.Show()
   End Sub

#End Region    ' Guide

#Region "Duplica"

   Public ReadOnly Property DuplicaCommand As ICommand
      Get
         If m_cmdDuplica Is Nothing Then
            m_cmdDuplica = New Command(AddressOf Duplica)
         End If
         Return m_cmdDuplica
      End Get
   End Property

   Public Sub Duplica()
      If Not IsNothing(Map.refHardwarePageVM) And Not IsNothing(Map.refHardwarePageVM.CurrHardware) Then
         If String.IsNullOrEmpty(Map.refHardwarePageVM.CurrHardware.SelTemplate) Then
            MessageBox.Show("Impossible to duplicate Hardware if there is no Hardware selected!", EgtMsg(50101), MessageBoxButton.OK, MessageBoxImage.Exclamation)
            Return
         End If


         If Map.refHardwarePageVM.CurrHardware.SaveControl() = Hardware.SaveResult.nCancel Then
            Return
         ElseIf Map.refHardwarePageVM.CurrHardware.SaveControl() = Hardware.SaveResult.nYes Then
            Map.refHardwarePageVM.CurrHardware.Save()
         End If
      End If

      If Not IsNothing(Map.refHardwarePageVM.CurrHardware) Then
         Dim refNewHardwareV As New NewHardwareV
         Dim refNewhardwareVM As New NewHardwareVM(Map.refHardwarePageVM.CurrHardware.HardwareGeneral)
         refNewHardwareV.DataContext = refNewhardwareVM
         refNewHardwareV.Owner = Application.Current.MainWindow
         refNewHardwareV.ShowDialog()
         refNewHardwareV.Close()
      End If

   End Sub


#End Region    ' Duplica

#Region "Door"

   Public ReadOnly Property DoorCommand As ICommand
      Get
         If m_cmdDoor Is Nothing Then
            m_cmdDoor = New Command(AddressOf GoToPartPage)
         End If
         Return m_cmdDoor
      End Get
   End Property

   Public Sub GoToPartPage()
      ' controllo che sia stato salvato 
      If Not IsNothing(Map.refHardwarePageVM) And Not IsNothing(Map.refHardwarePageVM.CurrHardware) Then
         If Map.refHardwarePageVM.CurrHardware.SaveControl() = Hardware.SaveResult.nCancel Then
            Return
         ElseIf Map.refHardwarePageVM.CurrHardware.SaveControl() = Hardware.SaveResult.nYes Then
            Map.refHardwarePageVM.CurrHardware.Save()
         End If
      End If
      ' torna all'EgtDOORCreator
      If OptionModule.m_ConfigurationSoftware = ConfigType.Assembly Then
         Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nAssemblyPage
      Else
         Map.refMainWindowVM.SelectedPage = MainWindowVM.ListPageEnum.nDDFPage
         Map.refCompoPanelVM.GoBackVisibility = Visibility.Collapsed
      End If
      ' elimino i riferimenti all'hardware corrente
      Map.refHardwarePageVM.CurrHardware = Nothing
      ' spengo il focus su tutti i bottoni
      For IndexCompoType As Integer = 0 To Map.refCompoPanelHardwareVM.CompoTypeList.Count - 1
         Map.refCompoPanelHardwareVM.CompoTypeList(IndexCompoType).IsSelectedBtn = False
      Next
      Map.refHardwarePageVM.CompoPanelControl.DataContext = Map.refCompoPanelHardwareVM
      Map.refProjectManagerVM.OpenLastProject()
      Map.refSceneManagerVM.RefreshBtn()
      CompoMatch.ResetHMD()
   End Sub


#End Region    ' LastProject

#End Region    ' Commands

   Public Event PropertyChanged As PropertyChangedEventHandler Implements INotifyPropertyChanged.PropertyChanged

   Public Sub NotifyPropertyChanged(propName As String)
      RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
   End Sub

End Class