EgtCAM5/TopCommandBar/TopCommandBarVM.vb

Imports System.Collections.ObjectModel
Imports System.IO
Imports EgtUILib

Public Class TopCommandBarVM
   Inherits ViewModelBase

#Region "FIELDS & PROPERTIES"

   Private m_ProjectMode As ProjectModeOpt

   Public ReadOnly Property MruFileNames As ObservableCollection(Of String)
      Get
         Return IniFile.m_MruFiles.m_FileNames
      End Get
   End Property

   ' Definizione comandi
   Private m_cmdNew As ICommand
   Private m_cmdOpen As ICommand
   Private Shared m_cmdOpenMruFile As ICommand
   Private m_cmdSave As ICommand
   Private m_cmdSaveAs As ICommand
   Private m_cmdInsert As ICommand
   Private m_cmdImport As ICommand
   Private m_cmdExport As ICommand
   Private m_cmdOptions As ICommand
   Private m_cmdSendFeedback As ICommand

#Region "Messages"

   Public ReadOnly Property DrawMsg As String
      Get
         Return EgtMsg(MSG_MAINWINDOW + 1)
      End Get
   End Property
   Public ReadOnly Property MachiningMsg As String
      Get
         Return EgtMsg(MSG_MAINWINDOW + 2)
      End Get
   End Property

#End Region    ' Messages

#Region "ToolTip"

   'Proprietà ToolTip
   Public ReadOnly Property NewToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 1)
      End Get
   End Property
   Public ReadOnly Property OpenToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 2)
      End Get
   End Property
   Public ReadOnly Property SaveToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 3)
      End Get
   End Property
   Public ReadOnly Property SaveAsToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 4)
      End Get
   End Property
   Public ReadOnly Property InsertToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 5)
      End Get
   End Property
   Public ReadOnly Property ImportToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 6)
      End Get
   End Property
   Public ReadOnly Property ExportToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 7)
      End Get
   End Property
   Public ReadOnly Property OptionsToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 9)
      End Get
   End Property
   Public ReadOnly Property SendFeedbackToolTip As String
      Get
         Return EgtMsg(MSG_TOPCOMMANDBAR + 13)
      End Get
   End Property

#End Region ' ToolTip

   Private m_DrawIsChecked As Boolean
   Public Property DrawIsChecked As Boolean
      Get
         Return m_DrawIsChecked
      End Get
      Set(value As Boolean)
         If value <> m_DrawIsChecked Then
            m_DrawIsChecked = value
            SetDrawMode(value)
            OnPropertyChanged("DrawIsChecked")
         End If
      End Set
   End Property

   Private m_MachiningIsChecked As Boolean
   Public Property MachiningIsChecked As Boolean
      Get
         Return m_MachiningIsChecked
      End Get
      Set(value As Boolean)
         If value <> m_MachiningIsChecked Then
            m_MachiningIsChecked = value
            SetMachiningMode(value)
         End If
      End Set
   End Property

   Private m_DrawIsEnabled As Boolean = True
   Public Property DrawIsEnabled As Boolean
      Get
         Return m_DrawIsEnabled
      End Get
      Set(value As Boolean)
         m_DrawIsEnabled = value
         OnPropertyChanged("DrawIsEnabled")
      End Set
   End Property

   Private m_MachiningIsEnabled As Boolean
   Public Property MachiningIsEnabled As Boolean
      Get
         Return m_MachiningIsEnabled
      End Get
      Set(value As Boolean)
         m_MachiningIsEnabled = value
         OnPropertyChanged("MachiningIsEnabled")
      End Set
   End Property

   Private m_SaveIsEnabled As Boolean = True
   Public Property SaveIsEnabled As Boolean
      Get
         Return m_SaveIsEnabled
      End Get
      Set(value As Boolean)
         If value <> m_SaveIsEnabled Then
            m_SaveIsEnabled = value
            OnPropertyChanged("SaveIsEnabled")
         End If
      End Set
   End Property

#End Region    ' Fields & Properties

#Region "Get & Set"

   Friend Function GetProjectMode() As ProjectModeOpt
      Return m_ProjectMode
   End Function

   Private Sub SetDrawMode(value As Boolean)
      If value Then
         Application.Msn.NotifyColleagues(Application.DRAWMODE_ISCHECKED)
         EgtResetCurrMachGroup()
         EgtZoom(ZM.ALL)
         Application.Msn.NotifyColleagues(Application.LOADOBJTREE)
         IniFile.m_ProjectMode = ProjectModeOpt.DRAW
      End If
   End Sub

   Private Sub SetMachiningMode(value As Boolean)
      If value Then
         Application.Msn.NotifyColleagues(Application.INITIALIZEMACHGROUPS)
      Else
         ' Deevidenzio l'ultima operazione evidenziata
         Application.Msn.NotifyColleagues(Application.REMOVEMARKFROMLASTOPERATION)
         ' e deseleziono tutto
         EgtDeselectAll()
      End If
   End Sub

#End Region    ' Get & Set

#Region "CONSTRUCTOR"

   Sub New()
      ' Creo riferimento a questa classe in EgtCAM5Map
      Map.SetRefTopCommandBarVM(Me)
      ' Inizializzo la selezione della modilità Draw all'apertura del programma
      DrawIsChecked = True
      Application.Msn.Register(Application.SETMACHININGMODE, Sub()
                                                                MachiningIsChecked = True
                                                                OnPropertyChanged("MachiningIsChecked")
                                                             End Sub)
      Application.Msn.Register(Application.MACHGROUPSRESULT, Sub(bOk As Boolean)
                                                                If bOk Then
                                                                   'EgtZoom(ZM.ALL)
                                                                   Application.Msn.NotifyColleagues(Application.UPDATECURRENTMACHINE)
                                                                   Application.Msn.NotifyColleagues(Application.MACHININGMODE_ISCHECKED)
                                                                   Application.Msn.NotifyColleagues(Application.UPDATEOPERATIONMACHININGLIST)
                                                                   IniFile.m_ProjectMode = ProjectModeOpt.MACHINING
                                                                Else
                                                                   m_MachiningIsChecked = False
                                                                   ' Error loading or creating Machining Group    -   Error
                                                                   MessageBox.Show(EgtMsg(10008), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)
                                                                End If
                                                             End Sub)
      Application.Msn.Register(Application.MAINWINDOW_CONTENTRENDERED, Sub()
                                                                          If IniFile.m_ProjectMode = ProjectModeOpt.ONLYDRAW Then
                                                                             MachiningIsEnabled = False
                                                                          Else
                                                                             MachiningIsEnabled = True
                                                                          End If
                                                                       End Sub)
      Application.Msn.Register(Application.SETDRAWISENABLED, Sub(DrawIsEnabled As Boolean)
                                                                Me.DrawIsEnabled = DrawIsEnabled
                                                             End Sub)
   End Sub

#End Region

#Region "COMMANDS"

#Region "NewCommand"

   ''' <summary>
   ''' Returns a command that do New.
   ''' </summary>
   Public ReadOnly Property NewCommand As ICommand
      Get
         If m_cmdNew Is Nothing Then
            m_cmdNew = New RelayCommand(AddressOf NewCmd)
         End If
         Return m_cmdNew
      End Get
   End Property

   ''' <summary>
   ''' Execute the New.  This method is invoked by the NewCommand.
   ''' </summary>
   Friend Sub NewCmd()
      Map.refProjectVM.GetController.NewProject(True)
      Application.Msn.NotifyColleagues(Application.SELECTIDINOBJTREENOMARK, EgtGetCurrLayer())
      OnPropertyChanged("MruFileNames")
   End Sub

#End Region ' NewCommand

#Region "OpenCommand"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property OpenCommand As ICommand
      Get
         If m_cmdOpen Is Nothing Then
            m_cmdOpen = New RelayCommand(AddressOf Open)
         End If
         Return m_cmdOpen
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Friend Sub Open()
      OpenProject(String.Empty)
   End Sub

   Friend Sub OpenProject(sFilePath As String)
      If String.IsNullOrEmpty(sFilePath) Then
         Dim sDir As String = String.Empty
         GetPrivateProfileString(S_GENERAL, K_LASTNGEDIR, "", sDir)
         Map.refProjectVM.GetController.OpenProject(sDir)
      Else
         Map.refProjectVM.GetController.OpenProject(sFilePath, False)
      End If
      Application.Msn.NotifyColleagues(Application.SELECTIDINOBJTREENOMARK, EgtGetCurrLayer())
   End Sub

#End Region ' OpenCommand

#Region "OpenMruFileCommand"

   ''' <summary>
   ''' Returns a command that do Open.
   ''' </summary>
   Public ReadOnly Property OpenMruFileCommand As ICommand
      Get
         If m_cmdOpenMruFile Is Nothing Then
            m_cmdOpenMruFile = New RelayCommand(AddressOf OpenMruFile)
         End If
         Return m_cmdOpenMruFile
      End Get
   End Property

   ''' <summary>
   ''' Execute the Open.  This method is invoked by the OpenCommand.
   ''' </summary>
   Public Sub OpenMruFile(ByVal param As Object)
      OpenProject(DirectCast(param, String).Replace("__", "_"))
   End Sub

#End Region ' OpenMruFileCommand

#Region "SaveCommand"

   ''' <summary>
   ''' Returns a command that do Save.
   ''' </summary>
   Public ReadOnly Property SaveCommand As ICommand
      Get
         If m_cmdSave Is Nothing Then
            m_cmdSave = New RelayCommand(AddressOf Save)
         End If
         Return m_cmdSave
      End Get
   End Property

   ''' <summary>
   ''' Execute the Save.  This method is invoked by the SaveCommand.
   ''' </summary>
   Public Sub Save(ByVal param As Object)
      Application.Msn.NotifyColleagues(Application.SAVEPROJECT)
   End Sub

#End Region ' SaveCommand

#Region "SaveAsCommand"

   ''' <summary>
   ''' Returns a command that do SaveAs.
   ''' </summary>
   Public ReadOnly Property SaveAsCommand As ICommand
      Get
         If m_cmdSaveAs Is Nothing Then
            m_cmdSaveAs = New RelayCommand(AddressOf SaveAs)
         End If
         Return m_cmdSaveAs
      End Get
   End Property

   ''' <summary>
   ''' Execute the SaveAs.  This method is invoked by the SaveAsCommand.
   ''' </summary>
   Public Sub SaveAs(ByVal param As Object)
      Application.Msn.NotifyColleagues(Application.SAVEASPROJECT)
   End Sub

#End Region ' SaveAsCommand

#Region "InsertCommand"

   ''' <summary>
   ''' Returns a command that do Insert.
   ''' </summary>
   Public ReadOnly Property InsertCommand As ICommand
      Get
         If m_cmdInsert Is Nothing Then
            m_cmdInsert = New RelayCommand(AddressOf Insert)
         End If
         Return m_cmdInsert
      End Get
   End Property

   ''' <summary>
   ''' Execute the Insert.  This method is invoked by the InsertCommand.
   ''' </summary>
   Public Sub Insert(ByVal param As Object)
      Application.Msn.NotifyColleagues(Application.INSERTPROJECT)
   End Sub

#End Region ' InsertCommand

#Region "ImportCommand"

   ''' <summary>
   ''' Returns a command that do Import.
   ''' </summary>
   Public ReadOnly Property ImportCommand As ICommand
      Get
         If m_cmdImport Is Nothing Then
            m_cmdImport = New RelayCommand(AddressOf Import)
         End If
         Return m_cmdImport
      End Get
   End Property

   ''' <summary>
   ''' Execute the Import.  This method is invoked by the ImportCommand.
   ''' </summary>
   Public Sub Import(ByVal param As Object)
      Application.Msn.NotifyColleagues(Application.IMPORTPROJECT)
   End Sub

#End Region ' ImportCommand

#Region "ExportCommand"

   ''' <summary>
   ''' Returns a command that do Export.
   ''' </summary>
   Public ReadOnly Property ExportCommand As ICommand
      Get
         If m_cmdExport Is Nothing Then
            m_cmdExport = New RelayCommand(AddressOf Export)
         End If
         Return m_cmdExport
      End Get
   End Property

   ''' <summary>
   ''' Execute the Export.  This method is invoked by the ExportCommand.
   ''' </summary>
   Public Sub Export(ByVal param As Object)
      Application.Msn.NotifyColleagues(Application.EXPORTPROJECT)
   End Sub

#End Region ' ExportCommand

#Region "OptionsCommand"

   ''' <summary>
   ''' Returns a command that do Export.
   ''' </summary>
   Public ReadOnly Property OptionsCommand As ICommand
      Get
         If m_cmdOptions Is Nothing Then
            m_cmdOptions = New RelayCommand(AddressOf Options)
         End If
         Return m_cmdOptions
      End Get
   End Property

   ''' <summary>
   ''' Execute the Export.  This method is invoked by the ExportCommand.
   ''' </summary>
   Public Sub Options(ByVal param As Object)
      Dim OptionsWindow As New OptionWindowV
      OptionsWindow.Height = 614
      OptionsWindow.Width = 1024
      OptionsWindow.DataContext = New OptionWindowVM
      OptionsWindow.Owner = Application.Current.MainWindow
      OptionsWindow.ShowDialog()
   End Sub

#End Region ' OptionsCommand

#Region "SendFeedbackCommand"

   ''' <summary>
   ''' Returns a command that do SendFeedback.
   ''' </summary>
   Public ReadOnly Property SendFeedbackCommand As ICommand
      Get
         If m_cmdSendFeedback Is Nothing Then
            m_cmdSendFeedback = New RelayCommand(AddressOf SendFeedback)
         End If
         Return m_cmdSendFeedback
      End Get
   End Property

   ''' <summary>
   ''' Execute the SendFeedback.  This method is invoked by the SendFeedbackCommand.
   ''' </summary>
   Public Sub SendFeedback(ByVal param As Object)
      ' Recupero indirizzo a cui spedire la mail
      Dim sSupportAddress As String = String.Empty
      GetPrivateProfileString(S_GENERAL, K_SUPPORT, "support@egaltech.com", sSupportAddress)
      ' se vuoto do messaggio di errore ed esco
      If String.IsNullOrWhiteSpace(sSupportAddress) Then
         MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 10), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
         Return
      End If
      ' Recupero numero chiave
      Dim sKey As String = String.Empty
      EgtGetKeyInfo(sKey)
      ' Recupero file del progetto corrente
      Dim sCurrProject As String = String.Empty
      EgtGetCurrFilePath(sCurrProject)
      ' se nome file vuoto, chiedo se si vuole salvare
      If String.IsNullOrWhiteSpace(sCurrProject) Then
         If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
            Application.Msn.NotifyColleagues(Application.SAVEPROJECT)
         End If
         EgtGetCurrFilePath(sCurrProject)
         ' se modificato, chiedo se si vuole salvare
      Else
         If EgtGetModified() Then
            If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
               Application.Msn.NotifyColleagues(Application.SAVEPROJECT)
            End If
         End If
      End If
      ' Verifico se il progetto corrente è una porta
      Dim nPartId As Integer = EgtGetFirstPart()
      If nPartId = GDB_ID.NULL Then
         nPartId = EgtGetFirstPartInRawPart(EgtGetFirstRawPart())
      End If
      Dim sPartName As String = String.Empty
      EgtGetName(nPartId, sPartName)
      Dim bPrjIsDoor As Boolean = (String.Compare(sPartName, "DOOR") = 0)
      ' Recupero macchine dei gruppi di lavoro del progetto
      Dim Machines As New List(Of String)
      Dim nMchGrpId As Integer = EgtGetFirstMachGroup()
      While nMchGrpId <> GDB_ID.NULL
         Dim sMachineName As String = String.Empty
         EgtGetMachGroupMachineName(nMchGrpId, sMachineName)
         If Not String.IsNullOrWhiteSpace(sMachineName) Then
            Machines.Add(sMachineName)
         End If
         nMchGrpId = EgtGetNextMachGroup(nMchGrpId)
      End While
      ' Recupero altri file con lo stesso nome del progetto
      Dim OtherFiles As New List(Of String)
      If Not String.IsNullOrWhiteSpace(sCurrProject) Then
         Dim sCurrProjectDir As String = Path.GetDirectoryName(sCurrProject)
         If Not String.IsNullOrWhiteSpace(sCurrProjectDir) Then
            Dim TempFiles() As String = Directory.GetFiles(sCurrProjectDir)
            For FileIndex = 0 To TempFiles.Count - 1
               If Path.GetFileNameWithoutExtension(TempFiles(FileIndex)).Contains(Path.GetFileNameWithoutExtension(sCurrProject)) AndAlso TempFiles(FileIndex) <> sCurrProject Then
                  OtherFiles.Add(TempFiles(FileIndex))
               End If
            Next
         End If
      End If
      ' Creo zip file da allegare
      Dim sZipToCreate As String = IniFile.m_sTempDir & "\Feedback.zip"
      If File.Exists(sZipToCreate) Then
         File.Delete(sZipToCreate)
      End If
      Try
         Using zip As New Ionic.Zip.ZipFile(sZipToCreate, Console.Out)
            ' aggiungo file macchine
            For Each sMachineName As String In Machines
               Dim sMachineDir As String = IniFile.m_sMachinesRoot & "\" & sMachineName
               If Directory.Exists(sMachineDir) Then
                  zip.AddItem(sMachineDir, sMachineName)
               End If
            Next
            ' aggiungo progetto corrente
            If File.Exists(sCurrProject) Then
               zip.AddItem(sCurrProject, "")
            End If
            ' aggiungo file log
            If File.Exists(IniFile.m_sLogFile) Then
               zip.AddItem(IniFile.m_sLogFile, "")
            End If
            ' aggiungo file ausiliari
            For Each sOther As String In OtherFiles
               zip.AddItem(sOther, "")
            Next
            ' se door attivo, progetto corrente è una porta e definito direttorio base di Doors
            If IniFile.IsActiveDoors And bPrjIsDoor And Directory.Exists(IniFile.m_sDoorsDirPath) Then
               ' aggiungo Doors completo
               zip.AddItem(IniFile.m_sDoorsDirPath, "Doors")
            End If
            ' salvo lo zip
            zip.Save()
         End Using
      Catch ex1 As Exception
         EgtOutLog("Exception in zip: " & ex1.ToString())
      End Try
      ' preparo la mail per il supporto
      Dim bEx As Boolean = False
      Try
         Dim SendFeedbackWindow As New EgtWPFLib5.MapiMailMessage("EgtCAM5 Feedback - " & sKey)
         SendFeedbackWindow.Recipients.Add(sSupportAddress)
         If Not String.IsNullOrWhiteSpace(sZipToCreate) AndAlso File.Exists(sZipToCreate) Then
            SendFeedbackWindow.Files.Add(IniFile.m_sTempDir & "\Feedback.zip")
         End If
         SendFeedbackWindow.ShowDialog()
      Catch ex As Exception
         EgtOutLog("Feedback exception: " & ex.ToString)
         bEx = True
      End Try
      If bEx OrElse EgtWPFLib5.MapiMailMessage.m_ErrorCode <> 0 Then
         MessageBox.Show(String.Format(EgtMsg(MSG_TOPCOMMANDBAR + 12), sSupportAddress, sZipToCreate), EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK, MessageBoxImage.Information)
      Else
         Application.Msn.NotifyColleagues(Application.NOTIFYSTATUSOUTPUT, EgtMsg(MSG_TOPCOMMANDBAR + 14))
      End If
   End Sub

#End Region ' SendFeedbackCommand

#End Region    ' Commands

End Class