Imports System.Collections.ObjectModel
Imports System.IO
Imports EgtUILib
Imports EgtWPFLib5

Public Class OperationParametersExpanderVM
   Inherits ViewModelBase

   Private m_OperParamsViewIsEnabled As Boolean = True
   Public Property OperParamsViewIsEnabled As Boolean
      Get
         Return m_OperParamsViewIsEnabled
      End Get
      Set(value As Boolean)
         m_OperParamsViewIsEnabled = value
         OnPropertyChanged("OperParamsViewIsEnabled")
      End Set
   End Property

   Private m_ParametersIsExpanded As Boolean
   Public Property ParametersIsExpanded As Boolean
      Get
         Return m_ParametersIsExpanded
      End Get
      Set(value As Boolean)
         If value <> m_ParametersIsExpanded Then
            Map.refMachiningOptionPanelVM.Set_IsExpanded(MachiningOptionPanelVM.MachiningOptionPanelExpander.OPERATIONPARAMETERS, value)
         End If
         Map.refProjectVM.EmitTitle()
         ' disattivo database utensili, lavorazioni e setup se vado sulla modifica di una lavorazione
         Map.refMachinePanelVM.ToolMachSetUpIsEnabled(Not m_ParametersIsExpanded, Not m_ParametersIsExpanded, Not m_ParametersIsExpanded)
         ' disattivo MTable e SpecialPanel se vado sulla modifica di una lavorazione
         Map.refDoorPanelVM.MTableIsEnabled(Not m_ParametersIsExpanded)
         Map.refSpecialPanelVM.SpecialPanelIsEnabled(Not m_ParametersIsExpanded)
      End Set
   End Property

   Private m_ParametersExpanderName As String
   Public Property ParametersExpanderName As String
      Get
         If String.IsNullOrEmpty(m_ParametersExpanderName) Then
            Return EgtMsg(MSG_OPERATION + 2)
         Else
            Return m_ParametersExpanderName
         End If
      End Get
      Set(value As String)
         If value <> m_ParametersExpanderName Then
            m_ParametersExpanderName = value
         End If
         OnPropertyChanged("ParametersExpanderName")
      End Set
   End Property

   Public ReadOnly Property OperationParameters As ContentControl
      Get
         ' Cerco l'operazione selezionata all'interno di OperationList
         Dim selOperation As OperationListBoxItem = Nothing
         For Each Operation In Map.refOperationsListExpanderVM.OperationList
            If Operation.IsSelected Then
               selOperation = Operation
               Exit For
            End If
         Next
         If selOperation.m_Type = MCH_OY.DISP Then
            If IsNothing(m_DispositionParameterExpander) Then
               m_DispositionParameterExpander = New DispositionParameterExpanderV
               m_DispositionParameterExpander.DataContext = New DispositionParameterExpanderVM(m_OpenDispositionFunction)
            End If
            Return m_DispositionParameterExpander
         Else
            If IsNothing(m_MachiningParameterExpander) Then
               m_MachiningParameterExpander = New MachiningParameterExpanderV
               m_MachiningParameterExpanderVM = New MachiningParameterExpanderVM()
               m_MachiningParameterExpander.DataContext = m_MachiningParameterExpanderVM
            End If
            m_MachiningParameterExpanderVM.NotifyPropertyChanged("ParamExpanderPageV")
            Return m_MachiningParameterExpander
         End If
      End Get
   End Property

   ' Actions
   Private m_OpenDispositionFunction As Action(Of Boolean)

   Private m_MachiningParameterExpander As MachiningParameterExpanderV
   Private m_MachiningParameterExpanderVM As MachiningParameterExpanderVM
   Private m_DispositionParameterExpander As DispositionParameterExpanderV

#Region "CONSTRUCTOR"

   Sub New()
      ' Creo riferimento a questa classe in Map
      Map.SetRefOperationParametersExpanderVM(Me)
      Map.refOperationsListExpanderVM.ListIsExpanded = True
   End Sub

#End Region    ' Constructor

#Region "METHODS"

   Friend Function InitOperationParameters() As Boolean
      m_ParametersIsExpanded = True
      ' Cerco l'operazione selezionata all'interno di OperationList
      Dim selOperation As OperationListBoxItem = Nothing
      For Each Operation In Map.refOperationsListExpanderVM.OperationList
         If Operation.IsSelected Then
            selOperation = Operation
            Exit For
         End If
      Next
      If IsNothing(selOperation) Then Return False

      If IsValidDispositionType(selOperation.m_Type) Then
         ParametersExpanderName = selOperation.Name
         ' Abilito la selezione di tutti i tipi di geometria
         Map.refProjectVM.SceneSelMode = SceneSelModeOpt.ALL
         ' Verifico se c'è un grezzo nella disposizione corrente
         Dim bFirstRaw As Boolean = True
         Dim nRawPartId As Integer = EgtGetFirstRawPart()
         While nRawPartId <> GDB_ID.NULL
            If EgtVerifyRawPartCurrPhase(nRawPartId) Then
               bFirstRaw = False
               Exit While
            End If
            nRawPartId = EgtGetNextRawPart(nRawPartId)
         End While
         ' Lancio funzione che inizializza la disposizione
         m_OpenDispositionFunction(bFirstRaw)
         ' Nascondo tutte le lavorazioni
         Dim nOpId As Integer = EgtGetFirstOperation()
         While nOpId <> GDB_ID.NULL
            If IsValidMachiningType(EgtGetOperationType(nOpId)) Then
               EgtSetOperationStatus(nOpId, False)
            End If
            nOpId = EgtGetNextOperation(nOpId)
         End While
         EgtDraw()
      ElseIf IsValidMachiningType(selOperation.m_Type) Then
         ' Imposto la fase di lavorazione corrente
         EgtSetCurrPhase(EgtGetOperationPhase(selOperation.m_Id))
         ' Leggo il tipo di operazione per impostare il tipo di selezione
         EgtSetCurrMachining(selOperation.m_Id)
         Dim sOpMach As String = String.Empty
         EgtGetMachiningParam(MCH_MP.NAME, sOpMach)
         ParametersExpanderName = selOperation.Name & " (" & sOpMach & ")"
         Dim OperationType As Integer = -1
         EgtGetMachiningParam(MCH_MP.TYPE, OperationType)
         ' Abilito la selezione delle lavorazioni
         Map.refProjectVM.SceneSelType = SceneSelTypeOpt.MACHINING
         ' Abilito la selezione dei giusti tipi di geometria
         Select Case OperationType
            Case MCH_OY.SAWING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomSawing
            Case MCH_OY.DRILLING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomDrilling
            Case MCH_OY.MILLING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomMilling
            Case MCH_OY.POCKETING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomPocketing
            Case MCH_OY.MORTISING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomMortising
            Case MCH_OY.SAWROUGHING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomSawRoughing
            Case MCH_OY.SAWFINISHING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomSawFinishing
            Case MCH_OY.GENMACHINING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomGenMachining
            Case MCH_OY.CHISELING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomChiseling
            Case MCH_OY.SURFFINISHING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomSurfFinishing
            Case MCH_OY.WATERJETTING
               Map.refProjectVM.SceneSelMode = OptionModule.m_SelGeomWaterJetting
         End Select
         ' Imposto visualizzazione utensile
         DirectCast(m_MachiningParameterExpander.DataContext, MachiningParameterExpanderVM).ViewTool = True
      End If
      OnPropertyChanged("ParametersIsExpanded")
      Return True
   End Function

   Friend Function ExitOperationParameters() As Boolean
      m_ParametersIsExpanded = False
      ' Cerco l'operazione selezionata all'interno di OperationList
      Dim selOperation As OperationListBoxItem = Nothing
      For Each Operation In Map.refOperationsListExpanderVM.OperationList
         If Operation.IsSelected Then
            selOperation = Operation
            Exit For
         End If
      Next

      If selOperation.m_Type = MCH_OY.DISP Then
         ' Visualizzo tutte le lavorazioni della fase corrente
         Dim nCurrPhase = EgtGetCurrPhase()
         Dim nOpId As Integer = EgtGetFirstOperation()
         While nOpId <> GDB_ID.NULL
            If IsValidMachiningType(EgtGetOperationType(nOpId)) Then
               EgtSetOperationStatus(nOpId, (EgtGetOperationPhase(nOpId) = nCurrPhase))
            End If
            nOpId = EgtGetNextOperation(nOpId)
         End While
         EgtDraw()
      Else
         ' Nascondo visualizzazione utensile
         DirectCast(m_MachiningParameterExpander.DataContext, MachiningParameterExpanderVM).ViewTool = False
      End If
      ParametersExpanderName = String.Empty
      ' Disabilito la selezione delle lavorazioni
      Map.refProjectVM.SceneSelType = SceneSelTypeOpt.NULL
      ' Resetto il tipo di selezione
      Map.refProjectVM.SceneSelMode = SceneSelModeOpt.NULL
      OnPropertyChanged("ParametersIsExpanded")
      Return True
   End Function

#End Region

End Class