-aggiunto pulsante per info già presenti

-aggiunto selezione in scena e apertura in albero
-sitemato accensione luce

Base/TreeView/TreeViewItemBase.vb

@@ -1,5 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports System.ComponentModel
+Imports EgtUILib
+Imports EgtUILib.EgtInterface
 
 ' Classe che definisce un elemento di base del TreeView
 Public Class TreeViewItemBase
@@ -31,7 +33,7 @@ Public Class TreeViewItemBase
       End Set
    End Property
 
-   Private m_isExpanded As Boolean
+   Friend m_isExpanded As Boolean
    Public Property IsExpanded As Boolean
       Get
          Return m_isExpanded
@@ -39,6 +41,25 @@ Public Class TreeViewItemBase
       Set(value As Boolean)
          If (value <> m_isExpanded) Then
             m_isExpanded = value
+            If Not Map.refProjectVM.bSelObjOnScene Then
+               Dim m_onldObjTreeOldId As Integer = Map.refManageLayerExpanderVM.m_nObjTreeOldId
+               If Not m_isExpanded Then
+               Else
+                  For Each Item As LayerTreeViewItem In Map.refManageLayerExpanderVM.LayerList
+                     For Each LayerItem As LayerTreeViewItem In Item.Items
+                        If m_isExpanded = LayerItem.m_isExpanded Then
+                           If m_onldObjTreeOldId = LayerItem.Id Then
+                              Map.refProjectVM.SetLastInteger(LayerItem.Id)
+                              Map.refProjectVM.ExecuteCommand(Controller.CMD.DESELECTPARTLAYEROBJ)
+                           Else
+                              Map.refManageLayerExpanderVM.SelectIdInObjTree(LayerItem.Id)
+                              'Map.refProjectVM.ExecuteCommand(Controller.CMD.SETCURRPARTLAYER)
+                           End If
+                        End If
+                     Next
+                  Next
+               End If
+            End If
             NotifyPropertyChanged("IsExpanded")
          End If
       End Set
@@ -92,6 +113,7 @@ Public Class InheritableTreeViewItem
    Implements INotifyPropertyChanged
 
    Friend m_Name As String
+
    Public Property Name As String
       Get
          Return m_Name
@@ -195,7 +217,6 @@ Public Class ParentItem
    Inherits TreeViewItemBase
 
    Private m_sPictureString As String
-   Private m_Items As ObservableCollection(Of ChildItem)
 
    Public Property PictureString As String
       Get
@@ -209,6 +230,7 @@ Public Class ParentItem
       End Set
    End Property
 
+   Private m_Items As ObservableCollection(Of ChildItem)
    Public Property Items As ObservableCollection(Of ChildItem)
       Get
          Return m_Items
@@ -255,4 +277,4 @@ Public Class ChildItem
       MyBase.New(Name, IsSelected, IsExpanded, IsActive)
    End Sub
 
-End Class
+End Class

Constants/ConstIni.vb

@@ -69,6 +69,7 @@ Module ConstIni
    Public Const K_SHOWGFRAME As String = "ShowGFrame"
    Public Const K_LINEWIDTH As String = "LineWidth"
    Public Const K_MARK As String = "Mark"
+   Public Const K_MARK2 As String = "Mark2"
    Public Const K_SELSURF As String = "SelSurf"
    Public Const K_SHOWMODE As String = "ShowMode"
    Public Const K_CURVEDIR As String = "CurveDir"
@@ -183,6 +184,7 @@ Module ConstIni
    Public Const K_SELGEOMSURFFINISHING As String = "SelGeomSurfFinishing"
    Public Const K_SELGEOMSURFROUGHING As String = "SelGeomSurfRoughing"
    Public Const K_SELGEOMFIVEAXMILLING As String = "SelGeomFiveAxMilling"
+   Public Const K_SELVMILLQUALITY As String = "VMillQuality"
    Public Const K_MACHININGGROUP As String = "MachiningGroup"
    Public Const K_SHOWONLYTABLE As String = "ShowOnlyTable"
    Public Const K_MOVETHROUGHDISPS As String = "MoveThroughDisps"

MainWindow/MainWindowVM.vb

@@ -385,8 +385,8 @@ Public Class MainWindowVM
          EgtSetLockId(sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2607, 1, IniFile.m_nKeyLevel) And
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2609, 1, IniFile.m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2607, 1, IniFile.m_nKeyOptions)
+                            EgtGetKeyOptions(3279, 2609, 1, IniFile.m_nKeyOptions)
       ' Leggo e imposto livello utilizzatore
       IniFile.m_nUserLevel = Math.Min(IniFile.m_nKeyLevel, GetPrivateProfileInt(S_GENERAL, K_USERLEVEL, 1))
       ' Imposto abilitazione lavorazioni avanzate
@@ -597,8 +597,11 @@ Public Class MainWindowVM
          ' pulisco output
          Map.refStatusBarVM.NotifyStatusOutput("")
          Map.refInputExpanderVM.ResetInputBox()
-      ElseIf e.Key = Key.Left OrElse e.Key = Key.Right OrElse e.Key = Key.Up OrElse e.Key = Key.Down AndAlso Map.refTopCommandBarVM.MachiningIsChecked AndAlso Map.refOperationParametersExpanderVM.OperationParameters.IsEnabled Then
+      ElseIf e.Key = Key.Left OrElse e.Key = Key.Right OrElse e.Key = Key.Up OrElse e.Key = Key.Down AndAlso
+             Map.refTopCommandBarVM.MachiningIsChecked AndAlso Map.refOperationParametersExpanderVM.OperationParameters.IsEnabled Then
          Map.refMachiningParameterExpanderVM.FocusSlider()
+         Dim nStep As Integer = If( e.Key = Key.Right OrElse e.Key = Key.Up, 1, -1)
+         Map.refMachiningParameterExpanderVM.SetSliderValue(nStep)
          e.Handled = True
       End If
    End Sub

My Project/AssemblyInfo.vb

@@ -70,6 +70,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.6.7.6")>
+<Assembly: AssemblyVersion("2.6.9.1")>
-<Assembly: AssemblyFileVersion("2.6.7.6")>
+<Assembly: AssemblyFileVersion("2.6.9.1")>
 

OptionPanel/DrawOptionPanel/InfoExpander/InfoExpanderV.xaml

@@ -3,7 +3,7 @@
              xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
 
    <Expander IsExpanded="{Binding IsEnabled}" IsEnabled="{Binding IsEnabled}"
-      Style="{StaticResource ExpanderStyle}">
+             Style="{StaticResource ExpanderStyle}">
       <Expander.Header>
          <TextBlock Text="{Binding PropertiesMsg}"/>
       </Expander.Header>

OptionPanel/DrawOptionPanel/InputExpander/InputExpanderV.xaml

@@ -1,9 +1,11 @@
 <UserControl x:Class="InputExpanderV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtCAM5="clr-namespace:EgtCAM5"
+             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5">
 
    <Expander Header="{Binding Title}" IsExpanded="{Binding IsExpanded}" IsEnabled="{Binding IsEnabled}"
-      Style="{StaticResource ExpanderStyle}">
+             Style="{StaticResource ExpanderStyle}">
       <StackPanel>
          <StackPanel.Style>
             <Style TargetType="{x:Type StackPanel}">
@@ -16,26 +18,75 @@
          </StackPanel.Style>
          <TextBlock Text="{Binding TextBlock}"
                     Visibility="{Binding TextVisibility}" Margin="5,5,0,5"/>
-         <TextBox Text="{Binding TextBox,UpdateSourceTrigger=PropertyChanged}"
+         <Grid>
-                  Visibility="{Binding TextVisibility}" Margin="5,0,5,5">
+            <Grid.ColumnDefinitions>
-            <TextBox.InputBindings>
+               <ColumnDefinition Width="1*"/>
-               <KeyBinding Key="Enter" Command="{Binding DoneCommand}"/>
+               <ColumnDefinition Width="Auto"/>
-               <KeyBinding Key="S" Modifiers="Control" Command="{Binding ShowCommand}"/>
+            </Grid.ColumnDefinitions>
-            </TextBox.InputBindings>
+            <TextBox x:Name="Txt" Text="{Binding TextBox,UpdateSourceTrigger=PropertyChanged}"  
-         </TextBox>
+                     PreviewKeyDown="TextBox_PreviewKeyDown" Height="Auto"
+                     Visibility="{Binding TextVisibility}" Margin="5,0,5,5" >
+               <TextBox.InputBindings>
+                  <KeyBinding Key="Enter" Command="{Binding DoneCommand}"/>
+                  <KeyBinding Key="S" Modifiers="Control" Command="{Binding ShowCommand}"/>
+               </TextBox.InputBindings>
+            </TextBox>
+            <Button Grid.Column="1" 
+                    Content="+"
+                    Command="{Binding ShowInfoItemCommand}"
+                    Visibility="Collapsed"
+                    Width="20"
+                    Height="20"
+                    Margin="5,-1,5,0" 
+                    VerticalAlignment="Top"/>
+            <!--Visibility="{Binding ShowInfoItemVisibility}"-->
+         </Grid>
          <CheckBox Content="{Binding CheckBoxText}" IsChecked="{Binding IsChecked}"
                    Visibility="{Binding CheckVisibility}" Margin="5,0,5,5"/>
          <ComboBox ItemsSource="{Binding ComboItemsList}" SelectedIndex="{Binding ComboSelectedIndex}"
-                   Visibility="{Binding ComboVisibility}" Margin="5,0,5,5"/>
+                   Visibility="{Binding ComboVisibility}" Margin="5,5,5,5"/>
+
+         <ItemsControl ItemsSource="{Binding InfoList}"
+                       Visibility="{Binding InfoVisibility}"
+                       Margin="5,5,0,10">
+            <ItemsControl.ItemTemplate>
+               <DataTemplate>
+                  <Grid>
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="Auto"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="Auto"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Text="{Binding Key}"
+                                Width="70"
+                                Margin="0,6,-15,0"/>
+                     <TextBox Grid.Column="1" 
+                              Text="{Binding Valour, UpdateSourceTrigger=PropertyChanged}"
+                              Margin="0,5,5,10">
+                        <TextBox.InputBindings>
+                           <KeyBinding Key="Enter" Command="{Binding DoneInfoCommand}"/>
+                        </TextBox.InputBindings>
+                     </TextBox>
+                     <Button Grid.Column="2" 
+                             Content="-"
+                             Command="{Binding RemoveInfoItemCommand}"
+                             Width="20"
+                             Height="20"
+                             Margin="5,-2,5,5"/>
+                  </Grid>
+               </DataTemplate>
+            </ItemsControl.ItemTemplate>
+         </ItemsControl>
+
          <Grid Margin="5,0,5,5">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Button Command="{Binding ShowCommand}" Visibility="{Binding ShowBtnVisibility}"
-               Content="{Binding ShowMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
+                    Content="{Binding ShowMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
             <Button Command="{Binding DoneCommand}" Grid.Column="1"
-               Content="{Binding OkMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
+                    Content="{Binding OkMsg}" Style="{StaticResource EgtCAM5_InputButton}"/>
          </Grid>
       </StackPanel>
    </Expander>

OptionPanel/DrawOptionPanel/InputExpander/InputExpanderV.xaml.vb

@@ -1,3 +1,11 @@
 Public Class InputExpanderV
 
+   Private Sub TextBox_PreviewKeyDown(sender As Object, e As KeyEventArgs)
+      If e.Key = Key.Enter And Keyboard.Modifiers = ModifierKeys.Shift Then
+         Txt.AcceptsReturn = True
+         Txt.TextWrapping = TextWrapping.Wrap
+         Txt.AppendText(Environment.NewLine)
+      End If
+   End Sub
+
 End Class

OptionPanel/DrawOptionPanel/InputExpander/InputExpanderVM.vb

@@ -1,11 +1,29 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports MS.Internal
 
 Public Class InputExpanderVM
    Inherits ViewModelBase
 
 #Region "FIELDS & PROPERTIES"
 
+   ' Variabile temporanea per salvare bShow
+   Private m_tmpbShow As Boolean
+
+   Private m_tmpInfoList As New ObservableCollection(Of InfoItem)
+   ''' <summary>
+   ''' Lista temporanea delle info
+   ''' </summary>
+   Private Property tmpInfoList As ObservableCollection(Of InfoItem)
+      Get
+         Return m_tmpInfoList
+      End Get
+      Set(value As ObservableCollection(Of InfoItem))
+         m_tmpInfoList = value
+         OnPropertyChanged("tmpInfoList")
+      End Set
+   End Property
+
    ' Expander fields
    Private m_IsExpanded As Boolean
    Public Property IsExpanded As Boolean
@@ -140,15 +158,47 @@ Public Class InputExpanderVM
       End Set
    End Property
 
+   Private m_InfoList As New ObservableCollection(Of InfoItem)
+   ''' <summary>
+   ''' Lista delle info modificate
+   ''' </summary>
+   Public Property InfoList As ObservableCollection(Of InfoItem)
+      Get
+         Return m_InfoList
+      End Get
+      Set(value As ObservableCollection(Of InfoItem))
+         m_InfoList = value
+         OnPropertyChanged("InfoList")
+      End Set
+   End Property
+
    Private m_ComboSelectedIndex As Integer
    Public Property ComboSelectedIndex As Integer
       Get
          Return m_ComboSelectedIndex
       End Get
       Set(value As Integer)
-         Map.refProjectVM.SetLastInteger(value)
+         If m_tmpbShow Then Map.refProjectVM.SetLastInteger(value)
          m_ComboSelectedIndex = value
+         ' Assegno l'indice selezionato ad una variabile temporanea per utilizzarlo quando rimuovo l'info dalla lista
+         Dim tmpComboSelectedIndex As Integer = ComboSelectedIndex
+         ' Controllo se l'indice è maggiore o uguale a zero e la lista tmp contiene valori
+         If m_ComboSelectedIndex >= 0 AndAlso tmpInfoList.Count > 0 Then
+            ' Controllo se la info è contenuta nella lista ComboItemsList
+            If ComboItemsList.Contains(tmpInfoList(m_ComboSelectedIndex).sKey) Then
+               ' Aggiungo la info alla lista per visualizzarla
+               InfoList.Add(New InfoItem(tmpInfoList(m_ComboSelectedIndex).nId, tmpInfoList(m_ComboSelectedIndex).sKey, m_tmpInfoList(m_ComboSelectedIndex).sValour))
+               ' Nascondo la combobox
+               ComboVisibility = Visibility.Collapsed
+               ' Rimuovo la info dalla ComboItemsList
+               ComboItemsList.Remove(tmpInfoList(m_ComboSelectedIndex).sKey)
+            End If
+            ' Rimuovo la info dalla tmpInfoList
+            tmpInfoList.Remove(tmpInfoList(tmpComboSelectedIndex))
+         End If
          OnPropertyChanged("ComboSelectedIndex")
+         OnPropertyChanged("ComboItemsList")
+         OnPropertyChanged("InfoList")
       End Set
    End Property
 
@@ -177,9 +227,43 @@ Public Class InputExpanderVM
       End Set
    End Property
 
+   Private m_ShowInfoItemVisibility As Visibility
+   ''' <summary>
+   ''' Propietà visibilità bottone +
+   ''' </summary>
+   Public Property ShowInfoItemVisibility As Visibility
+      Get
+         Return m_ShowInfoItemVisibility
+      End Get
+      Set(value As Visibility)
+         If value <> m_ShowInfoItemVisibility Then
+            m_ShowInfoItemVisibility = value
+            OnPropertyChanged("ShowInfoItemVisibility")
+         End If
+      End Set
+   End Property
+
+   Private m_InfoVisibility As Visibility
+   ''' <summary>
+   ''' Propietà visibilità lista info modificate
+   ''' </summary>
+   Public Property InfoVisibility As Visibility
+      Get
+         Return m_InfoVisibility
+      End Get
+      Set(value As Visibility)
+         If value <> m_InfoVisibility Then
+            m_InfoVisibility = value
+            OnPropertyChanged("InfoVisibility")
+         End If
+      End Set
+   End Property
+
    ' Commands definition
    Private m_cmdShow As ICommand
    Private m_cmdDone As ICommand
+   Private m_cmdShowInfoItem As ICommand
+   Private m_cmdRemoveInfoItem As ICommand
 
 #Region "Messages"
 
@@ -257,6 +341,15 @@ Public Class InputExpanderVM
    ''' Execute the Point.  This method is invoked by the PointCommand.
    ''' </summary>
    Public Sub Done(ByVal param As Object)
+      ' Controllo se la lista contenente la info modificata sia presente
+      If InfoList.Count > 0 Then
+         ' Ciclo sulla lista
+         For Each Item As InfoItem In InfoList
+            Map.refProjectVM.NotifyInputText((Item.Key & "=" & Item.Valour).Trim())
+            ' Assegno a m_TextBox la info modificata
+            m_TextBox &= vbCrLf & (Item.Key & "=" & Item.Valour).Trim() & vbCrLf
+         Next
+      End If
       Map.refProjectVM.Done(m_TextBox)
    End Sub
 
@@ -269,6 +362,30 @@ Public Class InputExpanderVM
 
 #End Region ' DoneCommand
 
+#Region "ShowInfoItemCommand"
+
+   ''' <summary>
+   ''' Comando per la visualizzazione della combobox
+   ''' </summary>
+   Public ReadOnly Property ShowInfoItemCommand As ICommand
+      Get
+         If m_cmdShowInfoItem Is Nothing Then
+            m_cmdShowInfoItem = New Command(AddressOf ShowInfoItem)
+         End If
+         Return m_cmdShowInfoItem
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Funzione per la visualizzazione della combobox
+   ''' </summary>
+   ''' <param name="param"></param>
+   Public Sub ShowInfoItem(ByVal param As Object)
+      ComboVisibility = Visibility.Visible
+   End Sub
+
+#End Region    ' ShowInfoItemCommand
+
 #End Region
 
 #Region "METHODS"
@@ -279,13 +396,37 @@ Public Class InputExpanderVM
          TextBlock = PrepareInputBoxParam.sLabel
          TextBox = ""
          TextVisibility = Visibility.Visible
+         ' Controllo se il titolo è uguale a INFO se si
+         If Title = EgtMsg(5359).ToUpper() Then
+            ' Metto tmpbShow a false
+            m_tmpbShow = False
+            ' Rendo visibile il pulsante che mostra la lista delle info
+            ShowInfoItemVisibility = Visibility.Visible
+            ' Rendo visibile la lista delle info selezionate
+            InfoVisibility = Visibility.Visible
+            ' Pulisco la lista tmpInfoList
+            tmpInfoList.Clear()
+            ' Pulisco la lista InfoList
+            InfoList.Clear()
+            ' Pulisco la lista ComboItemsList
+            ComboItemsList.Clear()
+            ' Popolo la lista ComboItemsList
+            ComboInfo()
+         End If
       End If
       If PrepareInputBoxParam.sCheckLabel <> "" Then
          CheckBoxText = PrepareInputBoxParam.sCheckLabel
          CheckVisibility = Visibility.Visible
       End If
       If PrepareInputBoxParam.bShowCombo Then
+         ' Assegno a tmpbShow PrepareInputBoxParam.bShowCombo
+         m_tmpbShow = PrepareInputBoxParam.bShowCombo
+         ' Pulisco la lista ComboItemsList
          ComboItemsList.Clear()
+         ' Pulisco la lista tmpInfoList
+         tmpInfoList.Clear()
+         ' Pulisco la lista InfoList
+         InfoList.Clear()
          ComboVisibility = Visibility.Visible
       End If
       If PrepareInputBoxParam.bShowBtn Then
@@ -302,6 +443,8 @@ Public Class InputExpanderVM
       CheckVisibility = Visibility.Collapsed
       ComboVisibility = Visibility.Collapsed
       ShowBtnVisibility = Visibility.Collapsed
+      ShowInfoItemVisibility = Visibility.Collapsed
+      InfoVisibility = Visibility.Collapsed
       IsExpanded = False
       IsEnabled = False
    End Sub
@@ -329,12 +472,44 @@ Public Class InputExpanderVM
 
    Private Function AddInputBoxCombo(ByVal sText As String, ByVal bSelected As Boolean) As Boolean
       ComboItemsList.Add(sText)
+
       If bSelected Then
          ComboSelectedIndex = ComboItemsList.Count - 1
       End If
       Return True
    End Function
 
+   ''' <summary>
+   ''' Rimovi nota da info lista
+   ''' </summary>
+   ''' <param name="InfoItem">Informazione da eliminare</param>
+   Friend Sub RemoveItemInfo(InfoItem As InfoItem)
+      ' Rimuovo info da lista modifica
+      InfoList.Remove(InfoItem)
+      ' Riaggiungo la info eliminata
+      ComboItemsList.Add(InfoItem.sKey)
+      ' Riaggiungo la info eliminata
+      tmpInfoList.Add(InfoItem)
+   End Sub
+
+   ''' <summary>
+   ''' Funzione che popola la lista ComboItemsList
+   ''' </summary>
+   Private Sub ComboInfo()
+      '''''''''''''''''''''''''''''' Recuperare funzione egtgetallinfo quando sarà pronta
+      Dim val As Integer
+      If Not m_tmpbShow Then
+         For Ind As Integer = 0 To 6
+            val += Ind
+            tmpInfoList.Add(New InfoItem(Ind, "A" & +Ind, val.ToString()))
+         Next
+
+         For Each InfoItem As InfoItem In tmpInfoList
+            ComboItemsList.Add(InfoItem.sKey)
+         Next
+      End If
+   End Sub
+
 #End Region    ' Methods
 
 End Class

OptionPanel/DrawOptionPanel/ManageLayerExpander/LayerTreeView.vb

@@ -69,7 +69,7 @@ Public Class LayerTreeViewItem
          Return m_bOnOff
       End Get
       Set(value As Boolean)
-         If Map.refProjectVM.GetController().GetStep() <> 0 Then Return
+         'If Map.refProjectVM.GetController().GetStep() <> 0 Then Return
          If m_bOnOff <> value Then
             m_bOnOff = value
             ' se abilitato, eseguo operazione

OptionPanel/DrawOptionPanel/ManageLayerExpander/ManageLayerExpanderV.xaml

@@ -1,9 +1,9 @@
 <UserControl x:Class="ManageLayerExpanderV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:interactivity="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
+             xmlns:interactivity="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
-   xmlns:expression="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"
+             xmlns:expression="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"
-   xmlns:local="clr-namespace:EgtCAM5">
+             xmlns:local="clr-namespace:EgtCAM5">
 
    <Expander IsExpanded="True" Style="{StaticResource ExpanderStyle}">
       <Expander.Header>
@@ -20,11 +20,11 @@
             <Button Content="{Binding NewLayerMsg}" Command="{Binding NewLayerCommand}"  Height="30"/>
             <Button Content="{Binding ColorMsg}" Command="{Binding LayerColorCommand}"  Height="30"/>
          </UniformGrid>
-         
+
-         <TreeView Name="LayerTreeView" MinHeight="150" MaxHeight="250" 
+         <TreeView x:Name="LayerTreeView" MinHeight="150" MaxHeight="250" 
-            ItemsSource="{Binding Path=LayerList}"
+                   ItemsSource="{Binding Path=LayerList}"
-            VirtualizingStackPanel.IsVirtualizing = "True"
+                   VirtualizingStackPanel.IsVirtualizing = "True"
-            VirtualizingStackPanel.VirtualizationMode = "Recycling">
+                   VirtualizingStackPanel.VirtualizationMode = "Recycling">
             <interactivity:Interaction.Triggers>
                <interactivity:EventTrigger EventName="MouseDoubleClick">
                   <interactivity:InvokeCommandAction Command="{Binding TreeViewDoubleClickCommand}"/>
@@ -50,8 +50,8 @@
                         <ColumnDefinition Width="Auto"/>
                      </Grid.ColumnDefinitions>
 
-                     <ToggleButton Style="{StaticResource EgtCAM5_LampToggleButton}" Grid.Column="0"
+                     <ToggleButton Style="{StaticResource EgtCAM5_LampToggleButton}" Grid.Column="0" 
-                                   IsChecked="{Binding OnOff}" Visibility="{Binding IsHidden}" Focusable="False" Height="15" Width="15" Margin="0,0,5,0"/>
+                                   IsChecked="{Binding OnOff}" Visibility="{Binding IsHidden}" Focusable="True" Height="15" Width="15" Margin="0,0,5,0"/>
                      <Image Grid.Column="1" Source="{Binding PictureString}" Height="15" Margin="0,0,5,0"/>
                      <TextBlock Grid.Column="2" Text="{Binding Name}" Margin="0,0,5,0"/>
                      <Ellipse Grid.Column="3" Height="10" Width="10" Fill="{Binding LayerColor}" />
@@ -61,7 +61,7 @@
             </TreeView.Resources>
 
             <!--Style dei nodi CathegoryItem che li riquadra di azzurro quando clicckati ed elimina l'ombra grigia 
-            che si presenta quando la categoria rimane vuota (ombra causata dal multibinding).--> 
+            che si presenta quando la categoria rimane vuota (ombra causata dal multibinding).-->
             <TreeView.ItemContainerStyle>
                <Style TargetType="{x:Type TreeViewItem}">
                   <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" />

OptionPanel/DrawOptionPanel/ManageLayerExpander/ManageLayerExpanderVM.vb

@@ -528,7 +528,7 @@ Public Class ManageLayerExpanderVM
 #Region "METHODS"
 
    Private WithEvents ObjTreeTimer As New System.Windows.Threading.DispatcherTimer
-   Private m_nObjTreeOldId As Integer = GDB_ID.NULL
+   Friend m_nObjTreeOldId As Integer = GDB_ID.NULL
    Private m_nObjTreeMenuId As Integer = GDB_ID.NULL
    Private m_bEnableUpdateObjInObjTree As Boolean = True
 

OptionPanel/MachiningOptionPanel/EstimationsExpander/EstimationsExpander.vb

@@ -177,12 +177,17 @@ Public Class EstimationsExpanderVM
       If Not bOk Then Return False
       ' Calcolo della stima
       If Not EgtEstimate(sEstFile, sInfo) Then
-         If EgtGetLastMachMgrErrorId() <> 0 Then
+         Dim nErr As Integer = EgtGetLastMachMgrErrorId()
+         If nErr = 1000 Then
+            MessageBox.Show(EgtMsg(5333), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr = 1001 Then
+            MessageBox.Show(EgtMsg(5334), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr <> 0 Then
             Dim sErr As String = EgtGetLastMachMgrErrorString()
             sErr = sErr.Replace("Cnc", "Est")
-            MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)
+            MessageBox.Show(sErr, EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Exclamation)
          Else
-            MessageBox.Show(EgtMsg(MSG_SIMULATION + 17), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
+            MessageBox.Show(EgtMsg(5317), EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Error)
          End If
          bOk = False
       End If

OptionPanel/MachiningOptionPanel/OperationExpander/MachiningParameterExpander/MachiningParameterExpanderVM.vb

@@ -126,6 +126,16 @@ Public Class MachiningParameterExpanderVM
       m_SliderValue = 1
       NotifyPropertyChanged(NameOf(SliderValue))
    End Sub
+   Friend Sub SetSliderValue(value As Integer)
+      Dim nOldSliderValue As Integer = m_SliderValue
+      m_SliderValue = Math.Min( Math.Max( m_SliderValue + value, 1), m_SliderScale)
+      Dim nStep As Integer = m_SliderValue - nOldSliderValue
+      If nStep = 0 Then Return
+      Dim nId As Integer = EgtPreviewMachiningTool(m_nPtEntId, nStep)
+      If nId <> GDB_ID.NULL Then m_nPtEntId = nId
+      EgtDraw()
+      NotifyPropertyChanged(NameOf(SliderValue))
+   End Sub
 
    Dim WoodDrillParamExpanderV As WoodDrillingParameterExpanderV
    Dim WoodSawParamExpanderV As WoodSawingParameterExpanderV

OptionPanel/MachiningOptionPanel/OperationExpander/OperationListBoxItem/OperationListBoxItem.vb

@@ -106,26 +106,32 @@ Public Class OperationListBoxItem
                Dim EntityIndex As Integer = 0
                Dim SubEntityIndex As Integer = 0
                While EgtGetMachiningGeometry(CountIndex, EntityIndex, SubEntityIndex)
-                  EgtSelectObj( EntityIndex)
+                  EgtSelectObj(EntityIndex)
-                  If EgtGetType( EntityIndex) = GDB_TY.SRF_MESH Or EgtGetType( EntityIndex) = GDB_TY.SRF_FRGN Then
+                  If EgtGetType(EntityIndex) = GDB_TY.SRF_MESH Or EgtGetType(EntityIndex) = GDB_TY.SRF_FRGN Then
                      SelData.AddIdSub(EntityIndex, SubEntityIndex)
                   End If
                   CountIndex += 1
                End While
             End If
             ' Notifico al contentcontrol OperationParameter di aggiornarsi
-            If Not IsNothing( Map.refOperationParametersExpanderVM) Then
+            If Not IsNothing(Map.refOperationParametersExpanderVM) Then
                Map.refOperationParametersExpanderVM.OnPropertyChanged("OperationParameters")
             End If
             Map.refOperationsListExpanderVM.OnPropertyChanged("MoveUp_IsEnabled")
             Map.refOperationsListExpanderVM.OnPropertyChanged("MoveDown_IsEnabled")
             ' Notifico l'operazione selezionata all'expander con l'albero delle lavorazioni aggiungibili
-            If Not IsNothing( Map.refMachiningTreeExpanderVM) Then
+            If Not IsNothing(Map.refMachiningTreeExpanderVM) Then
                Map.refMachiningTreeExpanderVM.nSelectedOperationId = Me.Id
             End If
             ' Aggiorno visualizzazione
             EgtDraw()
          End If
+         ' Resetto valori slider
+         If Not IsNothing(Map.refMachiningParameterExpanderVM) Then
+            Map.refMachiningParameterExpanderVM.SetSliderScale(EgtGetPreviewMachiningToolStepCount())
+            Map.refMachiningParameterExpanderVM.ResetSliderValue()
+         End If
+
          'OnPropertyChanged("ToolExpanderHeader")
          Map.refOperationsListExpanderVM.OnPropertyChanged("DuplicateCmd_IsEnabled")
          Map.refOperationsListExpanderVM.OnPropertyChanged("MachToDb_IsEnabled")

OptionPanel/MachiningOptionPanel/SimulationExpander/SimulationExpanderVM.vb

@@ -101,9 +101,11 @@ Public Class SimulationExpanderVM
       If Not GetCncFileName(True, sCncFile, sInfo) Then Return
       ' Eseguo
       If Not EgtGenerate(sCncFile, sInfo) Then
-         Dim nErr = EgtGetLastMachMgrErrorId()
+         Dim nErr As Integer = EgtGetLastMachMgrErrorId()
          If nErr = 1000 Then
             MessageBox.Show(EgtMsg(5333), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr = 1001 Then
+            MessageBox.Show(EgtMsg(5334), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
          ElseIf nErr <> 0 Then
             Dim sErr As String = EgtGetLastMachMgrErrorString()
             MessageBox.Show(sErr, EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Exclamation)
@@ -225,11 +227,16 @@ Public Class SimulationExpanderVM
       UpdateUI()
       ' Messaggio in caso di errore
       If Not bOk Then
-         If EgtGetLastMachMgrErrorId() <> 0 Then
+         Dim nErr As Integer = EgtGetLastMachMgrErrorId()
+         If nErr = 1000 Then
+            MessageBox.Show(EgtMsg(5333), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr = 1001 Then
+            MessageBox.Show(EgtMsg(5334), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr <> 0 Then
             Dim sErr As String = EgtGetLastMachMgrErrorString()
-            MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)                     '.... - ERRORE
+            MessageBox.Show(sErr, EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Exclamation)                     '.... - ERRORE
          Else
-            MessageBox.Show(EgtMsg(MSG_MESSAGEBOX + 10), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)    'Errore sconosciuto - ERRORE
+            MessageBox.Show(EgtMsg(15010), EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Error)    'Errore sconosciuto - ERRORE
          End If
       End If
       ' Imposto stato corrente
@@ -267,11 +274,16 @@ Public Class SimulationExpanderVM
       Map.refEstimationsExpanderVM.NotifyPropertyChanged("Estimation_IsEnabled")
       m_bStopOnNextCollision = True
       If Not EgtSimStart(False) Then
-         If EgtGetLastMachMgrErrorId() <> 0 Then
+         Dim nErr As Integer = EgtGetLastMachMgrErrorId()
+         If nErr = 1000 Then
+            MessageBox.Show(EgtMsg(5333), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr = 1001 Then
+            MessageBox.Show(EgtMsg(5334), EgtMsg(5320), MessageBoxButton.OK, MessageBoxImage.Information)
+         ElseIf nErr <> 0 Then
             Dim sErr As String = EgtGetLastMachMgrErrorString()
-            MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)                     '.... - ERRORE
+            MessageBox.Show(sErr, EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Exclamation)                     '.... - ERRORE
          Else
-            MessageBox.Show(EgtMsg(MSG_MESSAGEBOX + 10), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)    'Errore sconosciuto - ERRORE
+            MessageBox.Show(EgtMsg(15010), EgtMsg(5305), MessageBoxButton.OK, MessageBoxImage.Error)    'Errore sconosciuto - ERRORE
          End If
          SetSimulationStatus(MCH_SIM_ST.UI_STOP)
       End If

OptionsWindow/OptionModule.vb

@@ -56,6 +56,7 @@ Friend Module OptionModule
    Friend m_SelGeomSurfRoughing As SceneSelModeOpt
    Friend m_SelGeomWaterJetting As SceneSelModeOpt
    Friend m_SelGeomFiveAxMilling As SceneSelModeOpt
+   Friend m_SelVMillQuality As VMillSelTypeOpt
    ' Flag per aggiungere una nuova lavorazione alla fine della fase o subito dopo la lavorazione selezionata
    Friend m_bNewMachiningIsLastOne As Boolean
    ' Variabile che indica se usare lo script per calcolare automaticamente la disposizione quando si passa in lavorazione
@@ -147,6 +148,8 @@ Friend Module OptionModule
       m_SelGeomSurfRoughing = If(Temp < 0 Or Temp > 3, SceneSelModeOpt.PARTCURVESANDSURFACES, DirectCast(Temp, SceneSelModeOpt))
       Temp = GetPrivateProfileInt(S_MACH, K_SELGEOMFIVEAXMILLING, -1)
       m_SelGeomFiveAxMilling = If(Temp < 0 Or Temp > 3, SceneSelModeOpt.PARTCURVESANDSURFACES, DirectCast(Temp, SceneSelModeOpt))
+      Temp = GetPrivateProfileInt(S_MACH, K_SELVMILLQUALITY, 0)
+      m_SelVMillQuality = If(Temp < -2 Or Temp > 2, VMillSelTypeOpt.HIGHER, DirectCast(Temp, VMillSelTypeOpt))
       m_SelGeomWaterJetting = SceneSelModeOpt.PARTCURVES
       ' Inizializzo variabile che indica posizione nuova operazione di lavorazione
       m_bNewMachiningIsLastOne = (GetPrivateProfileInt(S_OPTIONS, K_NEWMACHININGISLASTONE, 0) <> 0)

OptionsWindow/OptionWindowV.xaml

@@ -9,11 +9,12 @@
                             WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
                             IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
                             MinWidth="400" MinHeight="382"
-                            Width="400" Height="520"
+                            Width="400" Height="575"
                             CloseCommand="{Binding CloseOptionsCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}">
 
    <EgtWPFLib5:EgtCustomWindow.Resources>
       <local:GeomTypeConverter x:Key="GeomTypeConverter"/>
+      <local:VMillTypeConverter x:Key="VMillTypeConverter"/>
    </EgtWPFLib5:EgtCustomWindow.Resources>
 
    <TabControl Margin="5,5,5,5">
@@ -316,30 +317,41 @@
                </UniformGrid>
             </GroupBox>
 
-            <Grid Margin="5,5,5,0">
+            <Grid Margin="10,5,10,0">
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
                <Grid.ColumnDefinitions>
                   <ColumnDefinition Width="2*"/>
                   <ColumnDefinition Width="1*"/>
                </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
+               <UniformGrid Columns="2" Grid.ColumnSpan="2" Margin="0,5,0,0">
-                  <RowDefinition Height="1*"/>
+                  <TextBlock Text="{Binding VMillQualityMsg}" VerticalAlignment="Center"/>
-                  <RowDefinition Height="1*"/>
+                  <ComboBox ItemsSource="{Binding VMillTypeList, Mode=OneWay}"
-               </Grid.RowDefinitions>
+                            SelectedItem="{Binding SelectedVMillTypeType}" Height="25">
-               <TextBlock Text="{Binding NewMachiningPosMsg}" VerticalAlignment="Center"
+                     <ComboBox.ItemTemplate>
-                          Grid.Row="0" Margin="0,0,0,5"/>
+                        <DataTemplate>
-               <CheckBox IsChecked="{Binding NewMachiningIsLastOne}"
+                           <TextBlock Text="{Binding Converter={StaticResource VMillTypeConverter}}"/>
-                         Grid.Column="1" Grid.Row="0" Margin="4,0,0,0" VerticalAlignment="Center"/>
+                        </DataTemplate>
-               <TextBlock Text="{Binding UseDispositionScriptMsg}" VerticalAlignment="Center"
+                     </ComboBox.ItemTemplate>
-                          Grid.Row="1" Margin="0,0,0,5"/>
+                  </ComboBox>
-               <CheckBox IsChecked="{Binding UseDispositionScript}"
+               </UniformGrid>
-                         Grid.Column="1" Grid.Row="1" Margin="4,0,0,0" VerticalAlignment="Center"/>
+               <TextBlock Grid.Row="1" Text="{Binding NewMachiningPosMsg}" VerticalAlignment="Center" 
-            </Grid>
+                          Margin="0,8,0,5"/>
-            <Grid Margin="5,5,5,0">
+               <CheckBox Grid.Row="1" Grid.Column="1" IsChecked="{Binding NewMachiningIsLastOne}"
-               <Button Content="{Binding AddMachineMsg}" Command="{Binding AddMachine_Command}"  Height="26" Margin="100,1"/>
+                         Margin="4,8,0,0" VerticalAlignment="Center"/>
-            </Grid>
+               <TextBlock Grid.Row="2" Text="{Binding UseDispositionScriptMsg}"
-            <Grid Margin="5,5,5,0">
+                          VerticalAlignment="Center" Margin="0,5,0,5"/>
-               <Button Content="{Binding ExportMachineMsg}" Command="{Binding ExportMachine_Command}"  Height="26" Margin="100,1"/>
+               <CheckBox Grid.Row="2" Grid.Column="1" IsChecked="{Binding UseDispositionScript}"
+                         Margin="4,5,0,0" VerticalAlignment="Center"/>
             </Grid>
+
+            <UniformGrid Rows="2">
+               <Button Content="{Binding AddMachineMsg}" Command="{Binding AddMachine_Command}" Height="26" Margin="100,10,100,5"/>
+               <Button Content="{Binding ExportMachineMsg}" Command="{Binding ExportMachine_Command}" Height="26" Margin="100,1"/>
+            </UniformGrid>
          </StackPanel>
       </TabItem>
 

OptionsWindow/OptionWindowVM.vb

@@ -2,6 +2,7 @@
 Imports System.Collections.ObjectModel
 Imports System.IO
 Imports EgtUILib
+Imports System.Globalization
 
 Public Class OptionWindowVM
    Inherits VMBase
@@ -19,6 +20,13 @@ Public Class OptionWindowVM
       End Get
    End Property
 
+   Private m_VMillTypeList As ObservableCollection(Of VMillSelTypeOpt) = New ObservableCollection(Of VMillSelTypeOpt)({VMillSelTypeOpt.LOWER, VMillSelTypeOpt.LOW, VMillSelTypeOpt.STANDARD, VMillSelTypeOpt.HIGH, VMillSelTypeOpt.HIGHER})
+   Public ReadOnly Property VMillTypeList As ObservableCollection(Of VMillSelTypeOpt)
+      Get
+         Return m_VMillTypeList
+      End Get
+   End Property
+
    Private m_UnitMeasureList As List(Of String) = New List(Of String)({"mm", "inch", EgtMsg(MSG_OPTIONPAGE + 45)})
    Public ReadOnly Property UnitMeasureList As List(Of String)
       Get
@@ -192,6 +200,17 @@ Public Class OptionWindowVM
       End Set
    End Property
 
+   Public Property SelectedVMillTypeType As VMillSelTypeOpt
+      Get
+         Return OptionModule.m_SelVMillQuality
+      End Get
+      Set(value As VMillSelTypeOpt)
+         If WritePrivateProfileString(S_MACH, K_SELVMILLQUALITY, CInt(value).ToString()) Then
+            OptionModule.m_SelVMillQuality = value
+         End If
+      End Set
+   End Property
+
    Public Property GeometryTolerance As String
       Get
          Return LenToString(OptionModule.m_dGeometryTolerance, 5)
@@ -268,8 +287,8 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bThickLine = value
-         WritePrivateProfileString(S_SCENE, K_LINEWIDTH, If( value, "2", "1"))
+         WritePrivateProfileString(S_SCENE, K_LINEWIDTH, If(value, "2", "1"))
-         EgtSetLineAttribs( If( value, 2, 1))
+         EgtSetLineAttribs(If(value, 2, 1))
       End Set
    End Property
 
@@ -589,7 +608,7 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bSpecialOn = value
-         WritePrivateProfileString(S_SPECIAL, K_SPECIALENABLE, If( value, "1", "0"))
+         WritePrivateProfileString(S_SPECIAL, K_SPECIALENABLE, If(value, "1", "0"))
       End Set
    End Property
 
@@ -609,7 +628,7 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bBeamOn = value
-         WritePrivateProfileString(S_BEAM, K_BEAMENABLE, If( value, "1", "0"))
+         WritePrivateProfileString(S_BEAM, K_BEAMENABLE, If(value, "1", "0"))
       End Set
    End Property
 
@@ -629,7 +648,7 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bWallOn = value
-         WritePrivateProfileString(S_WALL, K_WALLENABLE, If( value, "1", "0"))
+         WritePrivateProfileString(S_WALL, K_WALLENABLE, If(value, "1", "0"))
       End Set
    End Property
 
@@ -644,7 +663,7 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bDoorsOn = value
-         WritePrivateProfileString(S_DOORS, K_DDFENABLE, If( value, "1", "0"))
+         WritePrivateProfileString(S_DOORS, K_DDFENABLE, If(value, "1", "0"))
       End Set
    End Property
 
@@ -659,7 +678,7 @@ Public Class OptionWindowVM
       End Get
       Set(value As Boolean)
          OptionModule.m_bGunstockOn = value
-         WritePrivateProfileString(S_GUNSTOCK, K_GUNSTOCKENABLE, If( value, "1", "0"))
+         WritePrivateProfileString(S_GUNSTOCK, K_GUNSTOCKENABLE, If(value, "1", "0"))
       End Set
    End Property
 
@@ -717,17 +736,17 @@ Public Class OptionWindowVM
    End Property
    Public ReadOnly Property ThickLineMsg As String
       Get
-         Return EgtMsg( 6536)                     ' Linee spesse
+         Return EgtMsg(6536)                     ' Linee spesse
       End Get
    End Property
    Public ReadOnly Property SmoothTriMeshMsg As String
       Get
-         Return EgtMsg( 6518)                     ' Superfici smussate
+         Return EgtMsg(6518)                     ' Superfici smussate
       End Get
    End Property
    Public ReadOnly Property UpdateLicenceMsg As String
       Get
-         Return EgtMsg( 6553)                     ' Aggiorna licenza
+         Return EgtMsg(6553)                     ' Aggiorna licenza
       End Get
    End Property
 
@@ -966,6 +985,13 @@ Public Class OptionWindowVM
       End Get
    End Property
 
+   Public ReadOnly Property VMillQualityMsg As String
+      Get
+         Return EgtMsg(31214)
+      End Get
+   End Property
+
+
 #End Region
 
 #Region "COMMANDS"
@@ -1179,135 +1205,135 @@ Public Class OptionWindowVM
       Dim sMachDir As String = Path.Combine(IniFile.m_sMachinesRoot, sMachName)
       ' Preparo direttorio temporaneo
       Dim sTempDir As String = Path.Combine(IniFile.m_sMachinesRoot, "Temp")
-      If My.Computer.FileSystem.DirectoryExists( sTempDir) Then
+      If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       End If
-      My.Computer.FileSystem.CreateDirectory( sTempDir)
+      My.Computer.FileSystem.CreateDirectory(sTempDir)
       ' Unzip nel direttorio temporaneo
       Using zip As New Ionic.Zip.ZipFile(sMachZip)
-         zip.ExtractAll( sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
+         zip.ExtractAll(sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
       End Using
       ' Se non è una macchina segnalo il problema ed esco
-      If Not My.Computer.FileSystem.FileExists( Path.Combine( sTempDir, sMachName, sMachName & ".ini"))  Or
+      If Not My.Computer.FileSystem.FileExists(Path.Combine(sTempDir, sMachName, sMachName & ".ini")) Or
-         Not My.Computer.FileSystem.FileExists( Path.Combine( sTempDir, sMachName, sMachName & ".mlde")) Then
+         Not My.Computer.FileSystem.FileExists(Path.Combine(sTempDir, sMachName, sMachName & ".mlde")) Then
          ' Il file {0} non contiene una macchina  -  Avviso
          Dim sOut As String = String.Format(EgtMsg(MSG_OPTIONPAGE + 29), sMachZip)
          MessageBox.Show(sOut, EgtMsg(MSG_MESSAGEBOX + 2), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End If
       ' Imposto data e ora correnti al file mlde della macchina
       Try
-         File.SetLastWriteTime( Path.Combine( sTempDir, sMachName, sMachName & ".mlde"), System.DateTime.Now)
+         File.SetLastWriteTime(Path.Combine(sTempDir, sMachName, sMachName & ".mlde"), System.DateTime.Now)
       Catch ex As Exception
       End Try
       ' Verifico esistenza di una macchina con lo stesso nome
-      Dim bOldExists As Boolean = My.Computer.FileSystem.DirectoryExists( sMachDir)
+      Dim bOldExists As Boolean = My.Computer.FileSystem.DirectoryExists(sMachDir)
       Dim bUpdate As Boolean = True
       If bOldExists Then
-         Dim MachBox As New MachineBox( Application.Current.MainWindow, sMachName)
+         Dim MachBox As New MachineBox(Application.Current.MainWindow, sMachName)
-         Select MachBox.ShowDialog()
+         Select Case MachBox.ShowDialog()
-         Case MessageBoxResult.Yes
+            Case MessageBoxResult.Yes
-            bUpdate = False
+               bUpdate = False
-         Case MessageBoxResult.No
+            Case MessageBoxResult.No
-            bUpdate = True
+               bUpdate = True
-         Case MessageBoxResult.Cancel
+            Case MessageBoxResult.Cancel
-            ' Rimuovo il direttorio temporaneo ed esco
+               ' Rimuovo il direttorio temporaneo ed esco
-            My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+               My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
-            Return
+               Return
          End Select
          ' Faccio una copia di backup della macchina corrente
          Dim sBackupDir As String = sMachDir & ".old"
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir) Then
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir) Then
-            My.Computer.FileSystem.DeleteDirectory( sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+            My.Computer.FileSystem.DeleteDirectory(sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          End If
          Try
-            My.Computer.FileSystem.MoveDirectory( sMachDir, sBackupDir, True)
+            My.Computer.FileSystem.MoveDirectory(sMachDir, sBackupDir, True)
          Catch ex As Exception
             ' Ripristino lo stato originale ed esco
-            My.Computer.FileSystem.MoveDirectory( sBackupDir, sMachDir, True)
+            My.Computer.FileSystem.MoveDirectory(sBackupDir, sMachDir, True)
             ' L'aggiornamento della macchina "{0}" non è riuscito.
             Dim sKo As String = String.Format(EgtMsg(MSG_OPTIONPAGE + 35), sMachName)
-            EgtOutLog( sKo)
+            EgtOutLog(sKo)
             MessageBox.Show(sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
             Return
          End Try
       End If
       ' Installo la macchina
-      My.Computer.FileSystem.MoveDirectory( Path.Combine( sTempDir, sMachName), sMachDir, True)
+      My.Computer.FileSystem.MoveDirectory(Path.Combine(sTempDir, sMachName), sMachDir, True)
       ' Se è un aggiornamento, recupero utensili, lavorazioni, attrezzaggi e dati per travi
       If bOldExists And bUpdate Then
          Dim sBackupDir As String = sMachDir & ".old"
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir & "\Tools") Then
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir & "\Tools") Then
-            If My.Computer.FileSystem.DirectoryExists( sMachDir & "\Tools") Then
+            If My.Computer.FileSystem.DirectoryExists(sMachDir & "\Tools") Then
-                My.Computer.FileSystem.DeleteDirectory( sMachDir & "\Tools", FileIO.DeleteDirectoryOption.DeleteAllContents)
+               My.Computer.FileSystem.DeleteDirectory(sMachDir & "\Tools", FileIO.DeleteDirectoryOption.DeleteAllContents)
             End If
-            My.Computer.FileSystem.CopyDirectory( sBackupDir & "\Tools", sMachDir & "\Tools", True)
+            My.Computer.FileSystem.CopyDirectory(sBackupDir & "\Tools", sMachDir & "\Tools", True)
          End If
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir & "\Machinings") Then
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir & "\Machinings") Then
-            If My.Computer.FileSystem.DirectoryExists( sMachDir & "\Machinings") Then
+            If My.Computer.FileSystem.DirectoryExists(sMachDir & "\Machinings") Then
-                My.Computer.FileSystem.DeleteDirectory( sMachDir & "\Machinings", FileIO.DeleteDirectoryOption.DeleteAllContents)
+               My.Computer.FileSystem.DeleteDirectory(sMachDir & "\Machinings", FileIO.DeleteDirectoryOption.DeleteAllContents)
             End If
-            My.Computer.FileSystem.CopyDirectory( sBackupDir & "\Machinings", sMachDir & "\Machinings", True)
+            My.Computer.FileSystem.CopyDirectory(sBackupDir & "\Machinings", sMachDir & "\Machinings", True)
          End If
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir & "\SetUp") Then
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir & "\SetUp") Then
-            If My.Computer.FileSystem.DirectoryExists( sMachDir & "\SetUp") Then
+            If My.Computer.FileSystem.DirectoryExists(sMachDir & "\SetUp") Then
-                My.Computer.FileSystem.DeleteDirectory( sMachDir & "\SetUp", FileIO.DeleteDirectoryOption.DeleteAllContents)
+               My.Computer.FileSystem.DeleteDirectory(sMachDir & "\SetUp", FileIO.DeleteDirectoryOption.DeleteAllContents)
             End If
-            My.Computer.FileSystem.CopyDirectory( sBackupDir & "\SetUp", sMachDir & "\SetUp", True)
+            My.Computer.FileSystem.CopyDirectory(sBackupDir & "\SetUp", sMachDir & "\SetUp", True)
          End If
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir & "\Beam") Then
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir & "\Beam") Then
             ' Flag per sovrascrivere vecchio file BeamData.lua con nuovo
             Dim bBeamDataExists As Boolean = False
             Const sBeamData As String = "\BeamData.lua"
             ' Flag per sovrascrivere vecchio file MachiningTypes.ini
             Dim bMchgTypesExists As Boolean = False
             Const sMchgTypes As String = "\MachiningTypes.ini"
-            If My.Computer.FileSystem.DirectoryExists( sMachDir & "\Beam") Then
+            If My.Computer.FileSystem.DirectoryExists(sMachDir & "\Beam") Then
-               If My.Computer.FileSystem.FileExists( sMachDir & "\Beam" & sBeamData) Then
+               If My.Computer.FileSystem.FileExists(sMachDir & "\Beam" & sBeamData) Then
                   bBeamDataExists = True
-                  My.Computer.FileSystem.MoveFile( sMachDir & "\Beam" & sBeamData, sMachDir & sBeamData, True) 
+                  My.Computer.FileSystem.MoveFile(sMachDir & "\Beam" & sBeamData, sMachDir & sBeamData, True)
                End If
-               If My.Computer.FileSystem.FileExists( sMachDir & "\Beam" & sMchgTypes) Then
+               If My.Computer.FileSystem.FileExists(sMachDir & "\Beam" & sMchgTypes) Then
                   bMchgTypesExists = True
-                  My.Computer.FileSystem.MoveFile( sMachDir & "\Beam" & sMchgTypes, sMachDir & sMchgTypes, True) 
+                  My.Computer.FileSystem.MoveFile(sMachDir & "\Beam" & sMchgTypes, sMachDir & sMchgTypes, True)
                End If
-               My.Computer.FileSystem.DeleteDirectory( sMachDir & "\Beam", FileIO.DeleteDirectoryOption.DeleteAllContents)
+               My.Computer.FileSystem.DeleteDirectory(sMachDir & "\Beam", FileIO.DeleteDirectoryOption.DeleteAllContents)
             End If
-            My.Computer.FileSystem.CopyDirectory( sBackupDir & "\Beam", sMachDir & "\Beam", True)
+            My.Computer.FileSystem.CopyDirectory(sBackupDir & "\Beam", sMachDir & "\Beam", True)
-            If bBeamDataExists Then My.Computer.FileSystem.MoveFile( sMachDir & sBeamData, sMachDir & "\Beam" & sBeamData, True)
+            If bBeamDataExists Then My.Computer.FileSystem.MoveFile(sMachDir & sBeamData, sMachDir & "\Beam" & sBeamData, True)
-            If bMchgTypesExists Then My.Computer.FileSystem.MoveFile( sMachDir & sMchgTypes, sMachDir & "\Beam" & sMchgTypes, True)
+            If bMchgTypesExists Then My.Computer.FileSystem.MoveFile(sMachDir & sMchgTypes, sMachDir & "\Beam" & sMchgTypes, True)
          End If
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir & "\Wall") Then
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir & "\Wall") Then
             ' Flag per sovrascrittura vecchio file WallData.lua con nuovo
             Dim bWallDataExists As Boolean = False
             Const sWallData As String = "\WallData.lua"
             ' Flag per sovrascrivere vecchio file MachiningTypes.ini
             Dim bMchgTypesExists As Boolean = False
             Const sMchgTypes As String = "\MachiningTypes.ini"
-            If My.Computer.FileSystem.DirectoryExists( sMachDir & "\Wall") Then
+            If My.Computer.FileSystem.DirectoryExists(sMachDir & "\Wall") Then
-               If My.Computer.FileSystem.FileExists( sMachDir & "\Wall" & sWallData) Then
+               If My.Computer.FileSystem.FileExists(sMachDir & "\Wall" & sWallData) Then
                   bWallDataExists = True
-                  My.Computer.FileSystem.MoveFile( sMachDir & "\Wall" & sWallData, sMachDir & sWallData, True) 
+                  My.Computer.FileSystem.MoveFile(sMachDir & "\Wall" & sWallData, sMachDir & sWallData, True)
                End If
-               If My.Computer.FileSystem.FileExists( sMachDir & "\Wall" & sMchgTypes) Then
+               If My.Computer.FileSystem.FileExists(sMachDir & "\Wall" & sMchgTypes) Then
                   bMchgTypesExists = True
-                  My.Computer.FileSystem.MoveFile( sMachDir & "\Wall" & sMchgTypes, sMachDir & sMchgTypes, True) 
+                  My.Computer.FileSystem.MoveFile(sMachDir & "\Wall" & sMchgTypes, sMachDir & sMchgTypes, True)
                End If
-               My.Computer.FileSystem.DeleteDirectory( sMachDir & "\Wall", FileIO.DeleteDirectoryOption.DeleteAllContents)
+               My.Computer.FileSystem.DeleteDirectory(sMachDir & "\Wall", FileIO.DeleteDirectoryOption.DeleteAllContents)
             End If
-            My.Computer.FileSystem.CopyDirectory( sBackupDir & "\Wall", sMachDir & "\Wall", True)
+            My.Computer.FileSystem.CopyDirectory(sBackupDir & "\Wall", sMachDir & "\Wall", True)
-            If bWallDataExists Then My.Computer.FileSystem.MoveFile( sMachDir & sWallData, sMachDir & "\Wall" & sWallData, True)
+            If bWallDataExists Then My.Computer.FileSystem.MoveFile(sMachDir & sWallData, sMachDir & "\Wall" & sWallData, True)
-            If bMchgTypesExists Then My.Computer.FileSystem.MoveFile( sMachDir & sMchgTypes, sMachDir & "\Wall" & sMchgTypes, True)
+            If bMchgTypesExists Then My.Computer.FileSystem.MoveFile(sMachDir & sMchgTypes, sMachDir & "\Wall" & sMchgTypes, True)
          End If
       End If
       'La macchina "{0}" è stata aggiornata con successo.
       Dim sOk As String = String.Format(EgtMsg(MSG_OPTIONPAGE + 30), sMachName)
-      EgtOutLog( sOk)
+      EgtOutLog(sOk)
       MessageBox.Show(sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
       ' Rimuovo il direttorio temporaneo
-      My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+      My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       ' Aggiorno la lista delle macchina
       Map.refMachinePanelVM.InsertMachine(sMachDir)
    End Sub
@@ -1355,7 +1381,7 @@ Public Class OptionWindowVM
             ' aggiungo i file della Macchina
             Dim sMachineDir As String = IniFile.m_sMachinesRoot & "\" & sCurrMachineName
             If Directory.Exists(sMachineDir) Then
-               zip.AddSelectedFiles( "name != *\.git\*.* and name != *.git*", sMachineDir, sCurrMachineName, True)
+               zip.AddSelectedFiles("name != *\.git\*.* and name != *.git*", sMachineDir, sCurrMachineName, True)
             End If
             ' salvo lo zip
             zip.Save()
@@ -1366,7 +1392,7 @@ Public Class OptionWindowVM
          Dim sKo As String = String.Format(EgtMsg(6551), sCurrMachineName)
          EgtOutLog(sKo)
          MessageBox.Show(sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
-         return
+         Return
       End Try
       'La macchina "{0}" è stata esportata con successo.
       Dim sOk As String = String.Format(EgtMsg(6552), sCurrMachineName)
@@ -1391,10 +1417,10 @@ Public Class OptionWindowVM
       Dim sExeVer As String = IniFile.GetProgramVersion()
       ' Verifico presenza di una precedente installazione del Beam
       Dim sBeamVer As String = ""
-      IniFile.GetSpecialLuaVersion( IniFile.m_sBeamDirPath, sBeamVer)
+      IniFile.GetSpecialLuaVersion(IniFile.m_sBeamDirPath, sBeamVer)
-      If String.IsNullOrEmpty( sBeamVer) Then
+      If String.IsNullOrEmpty(sBeamVer) Then
          ' Il modulo "{0}" non è stato trovato, impossibile aggiornare. - Avviso
-         Dim sOut As String = String.Format(EgtMsg(6555), "Beam") 
+         Dim sOut As String = String.Format(EgtMsg(6555), "Beam")
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Esco
          Return
@@ -1410,26 +1436,26 @@ Public Class OptionWindowVM
       Dim sBeamZip As String = BeamDlg.FileName
       ' Preparo direttorio temporaneo
       Dim sTempDir As String = Path.Combine(IniFile.m_sTempDir, "Beam")
-      If My.Computer.FileSystem.DirectoryExists( sTempDir) Then
+      If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       End If
-      My.Computer.FileSystem.CreateDirectory( sTempDir)
+      My.Computer.FileSystem.CreateDirectory(sTempDir)
       ' Unzip nel direttorio temporaneo
       Using zip As New Ionic.Zip.ZipFile(sBeamZip)
-         zip.ExtractAll( sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
+         zip.ExtractAll(sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
       End Using
       ' Recupero i dati del nuovo Beam
       Dim sNewName = ""
       Dim sNewVer = ""
       Dim sNewMinExe = ""
-      IniFile.GetSpecialLuaData( sTempDir, sNewName, sNewVer, sNewMinExe)
+      IniFile.GetSpecialLuaData(sTempDir, sNewName, sNewVer, sNewMinExe)
       ' Verifico che sia veramente il Beam
       If String.Compare(sNewName, "Beam") <> 0 Then
          ' Il file zip non contiene il modulo "{0}". - Avviso
-         Dim sOut As String = String.Format(EgtMsg(6556), "Beam") 
+         Dim sOut As String = String.Format(EgtMsg(6556), "Beam")
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End If
       ' Verifico la versione minima del programma
@@ -1438,42 +1464,42 @@ Public Class OptionWindowVM
          Dim sOut As String = String.Format(EgtMsg(6557), "Beam", sNewMinExe)
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End If
       ' Verifico la versione del Beam e se più vecchia chiedo cosa fare
       If String.Compare(sNewVer, sBeamVer) < 0 Then
          ' La versione del nuovo modulo "{0}" è più vecchia dell'attuale. Vuoi sovrascrivere lo stesso ?
          Dim sOut As String = String.Format(EgtMsg(6558), "Beam")
-         if MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15003), MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.No Then
+         If MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15003), MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.No Then
             ' Rimuovo il direttorio temporaneo ed esco
-            My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+            My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
             Return
          End If
       End If
       ' Faccio una copia di backup del Beam corrente
       Dim sBackupDir As String = IniFile.m_sBeamDirPath & ".old"
-      If My.Computer.FileSystem.DirectoryExists( sBackupDir) Then
+      If My.Computer.FileSystem.DirectoryExists(sBackupDir) Then
-         My.Computer.FileSystem.DeleteDirectory( sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       End If
       Try
-         My.Computer.FileSystem.MoveDirectory( IniFile.m_sBeamDirPath, sBackupDir, True)
+         My.Computer.FileSystem.MoveDirectory(IniFile.m_sBeamDirPath, sBackupDir, True)
       Catch ex As Exception
          ' Ripristino lo stato originale ed esco
-         My.Computer.FileSystem.MoveDirectory( sBackupDir, IniFile.m_sBeamDirPath, True)
+         My.Computer.FileSystem.MoveDirectory(sBackupDir, IniFile.m_sBeamDirPath, True)
          ' L'aggiornamento del modulo "{0}" non è riuscito. - Errore
          Dim sOut As String = String.Format(EgtMsg(6559), "Beam")
-         EgtOutLog( sOut)
+         EgtOutLog(sOut)
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15001), MessageBoxButton.OK, MessageBoxImage.Error)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End Try
       ' Installo il Beam
-      My.Computer.FileSystem.MoveDirectory( sTempDir, IniFile.m_sBeamDirPath, True)
+      My.Computer.FileSystem.MoveDirectory(sTempDir, IniFile.m_sBeamDirPath, True)
       ' Il modulo "{0}" è stata aggiornato con successo. - Info
       Dim sOk As String = String.Format(EgtMsg(6560), "Beam")
-      EgtOutLog( sOk)
+      EgtOutLog(sOk)
       MessageBox.Show(Application.Current.MainWindow, sOk, EgtMsg(15003), MessageBoxButton.OK)
    End Sub
 
@@ -1495,10 +1521,10 @@ Public Class OptionWindowVM
       Dim sExeVer As String = IniFile.GetProgramVersion()
       ' Verifico presenza di una precedente installazione del Wall
       Dim sWallVer As String = ""
-      IniFile.GetSpecialLuaVersion( IniFile.m_sWallDirPath, sWallVer)
+      IniFile.GetSpecialLuaVersion(IniFile.m_sWallDirPath, sWallVer)
-      If String.IsNullOrEmpty( sWallVer) Then
+      If String.IsNullOrEmpty(sWallVer) Then
          ' Il modulo "{0}" non è stato trovato, impossibile aggiornare. - Avviso
-         Dim sOut As String = String.Format(EgtMsg(6555), "Wall") 
+         Dim sOut As String = String.Format(EgtMsg(6555), "Wall")
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Esco
          Return
@@ -1514,26 +1540,26 @@ Public Class OptionWindowVM
       Dim sWallZip As String = WallDlg.FileName
       ' Preparo direttorio temporaneo
       Dim sTempDir As String = Path.Combine(IniFile.m_sTempDir, "Wall")
-      If My.Computer.FileSystem.DirectoryExists( sTempDir) Then
+      If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       End If
-      My.Computer.FileSystem.CreateDirectory( sTempDir)
+      My.Computer.FileSystem.CreateDirectory(sTempDir)
       ' Unzip nel direttorio temporaneo
       Using zip As New Ionic.Zip.ZipFile(sWallZip)
-         zip.ExtractAll( sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
+         zip.ExtractAll(sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
       End Using
       ' Recupero i dati del nuovo Wall
       Dim sNewName = ""
       Dim sNewVer = ""
       Dim sNewMinExe = ""
-      IniFile.GetSpecialLuaData( sTempDir, sNewName, sNewVer, sNewMinExe)
+      IniFile.GetSpecialLuaData(sTempDir, sNewName, sNewVer, sNewMinExe)
       ' Verifico che sia veramente il Wall
       If String.Compare(sNewName, "Wall") <> 0 Then
          ' Il file zip non contiene il modulo "{0}". - Avviso
-         Dim sOut As String = String.Format(EgtMsg(6556), "Wall") 
+         Dim sOut As String = String.Format(EgtMsg(6556), "Wall")
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End If
       ' Verifico la versione minima del programma
@@ -1542,42 +1568,42 @@ Public Class OptionWindowVM
          Dim sOut As String = String.Format(EgtMsg(6557), "Wall", sNewMinExe)
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15002), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End If
       ' Verifico la versione del Wall e se più vecchia chiedo cosa fare
       If String.Compare(sNewVer, sWallVer) < 0 Then
          ' La versione del nuovo modulo "{0}" è più vecchia dell'attuale. Vuoi sovrascrivere lo stesso ?
          Dim sOut As String = String.Format(EgtMsg(6558), "Wall")
-         if MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15003), MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.No Then
+         If MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15003), MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.No Then
             ' Rimuovo il direttorio temporaneo ed esco
-            My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+            My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
             Return
          End If
       End If
       ' Faccio una copia di backup del Wall corrente
       Dim sBackupDir As String = IniFile.m_sWallDirPath & ".old"
-      If My.Computer.FileSystem.DirectoryExists( sBackupDir) Then
+      If My.Computer.FileSystem.DirectoryExists(sBackupDir) Then
-         My.Computer.FileSystem.DeleteDirectory( sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       End If
       Try
-         My.Computer.FileSystem.MoveDirectory( IniFile.m_sWallDirPath, sBackupDir, True)
+         My.Computer.FileSystem.MoveDirectory(IniFile.m_sWallDirPath, sBackupDir, True)
       Catch ex As Exception
          ' Ripristino lo stato originale ed esco
-         My.Computer.FileSystem.MoveDirectory( sBackupDir, IniFile.m_sWallDirPath, True)
+         My.Computer.FileSystem.MoveDirectory(sBackupDir, IniFile.m_sWallDirPath, True)
          ' L'aggiornamento del modulo "{0}" non è riuscito. - Errore
          Dim sOut As String = String.Format(EgtMsg(6559), "Wall")
-         EgtOutLog( sOut)
+         EgtOutLog(sOut)
          MessageBox.Show(Application.Current.MainWindow, sOut, EgtMsg(15001), MessageBoxButton.OK, MessageBoxImage.Error)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End Try
       ' Installo il Wall
-      My.Computer.FileSystem.MoveDirectory( sTempDir, IniFile.m_sWallDirPath, True)
+      My.Computer.FileSystem.MoveDirectory(sTempDir, IniFile.m_sWallDirPath, True)
       ' Il modulo "{0}" è stata aggiornato con successo. - Info
       Dim sOk As String = String.Format(EgtMsg(6560), "Wall")
-      EgtOutLog( sOk)
+      EgtOutLog(sOk)
       MessageBox.Show(Application.Current.MainWindow, sOk, EgtMsg(15003), MessageBoxButton.OK)
    End Sub
 
@@ -1665,4 +1691,29 @@ Public Class GeomTypeConverter
       Throw New NotImplementedException
    End Function
 
+End Class
+
+Public Class VMillTypeConverter
+   Implements IValueConverter
+
+   Public Function Convert(value As Object, targetType As Type, parameter As Object, culture As CultureInfo) As Object Implements IValueConverter.Convert
+      Select Case CInt(value)
+         Case VMillSelTypeOpt.LOWER
+            Return EgtMsg(31215)
+         Case VMillSelTypeOpt.LOW
+            Return EgtMsg(31216)
+         Case VMillSelTypeOpt.STANDARD
+            Return EgtMsg(31217)
+         Case VMillSelTypeOpt.HIGH
+            Return EgtMsg(31218)
+         Case VMillSelTypeOpt.HIGHER
+            Return EgtMsg(31219)
+         Case Else
+            Return ""
+      End Select
+   End Function
+
+   Public Function ConvertBack(value As Object, targetType As Type, parameter As Object, culture As CultureInfo) As Object Implements IValueConverter.ConvertBack
+      Throw New NotImplementedException()
+   End Function
 End Class

Project/ProjectVM.vb

@@ -4,7 +4,7 @@ Imports System.IO
 Imports System.Globalization
 Imports EgtUILib
 Imports EgtWPFLib5
-Imports EgtWPFLib5.EgtFloating
+Imports System.Windows.Forms.AxHost
 
 Public Class ProjectVM
    Inherits TabViewModel
@@ -58,14 +58,16 @@ Public Class ProjectVM
       End Get
    End Property
 
-#End Region
 
+
+#End Region
 #Region "EGTUILIB FIELDS"
 
-    Private m_bCPlaneTypePos As Boolean
+   Private m_bCPlaneTypePos As Boolean
 
    ' Variabile per implementazione eventi
    Private m_InputText As String
+   Friend bSelObjOnScene As Boolean = False
 
 #End Region
 
@@ -244,14 +246,14 @@ Public Class ProjectVM
             Dim sTitle As String = EgtMsg(10101)
             MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
          End If
-      ' Se altrimenti manca il collegamento con la chiave di rete
+         ' Se altrimenti manca il collegamento con la chiave di rete
       ElseIf IniFile.m_nKeyLevel = -9 Then
          EgtOutLog("Missing Link with Net Dongle")
          ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione."  "Errore"
          Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
          Dim sTitle As String = EgtMsg(10101)
          MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
-      ' Altrimenti manca la licenza
+         ' Altrimenti manca la licenza
       Else
          EgtOutLog("Problems with Licence")
          ' Box di avviso licenza con problemi : sKeyInfo \n "Programma senza licenza. \n Caricala e riavvia il programma."  "Errore"
@@ -307,10 +309,13 @@ Public Class ProjectVM
       Dim nLineWidth As Integer = 1
       nLineWidth = GetPrivateProfileInt(S_SCENE, K_LINEWIDTH, nLineWidth)
       m_ProjectScene.SetLineWidth(nLineWidth)
-      ' imposto colore di evidenziazione
+      ' imposto colori di evidenziazione
       Dim MarkColor As New Color3d(255, 255, 0)
       GetPrivateProfileColor(S_SCENE, K_MARK, MarkColor)
       m_ProjectScene.SetMarkMaterial(MarkColor)
+      Dim Mark2Color As New Color3d(255, 64, 64)
+      GetPrivateProfileColor(S_SCENE, K_MARK2, Mark2Color)
+      m_ProjectScene.SetMark2Material(Mark2Color)
       ' imposto colore per superfici selezionate
       Dim SelSurfColor As New Color3d(255, 255, 192)
       GetPrivateProfileColor(S_SCENE, K_SELSURF, SelSurfColor)
@@ -483,7 +488,7 @@ Public Class ProjectVM
             End If
             ' Esecuzione
             bOk = ExecBeam(sFile, sMachine, nFlag, True)
-         ' altrimenti pareti
+            ' altrimenti pareti
          Else
             ' Verifica abilitazione elaborazione pareti
             If Not VerifyWall(sFile, sMachine, nFlag) Then
@@ -497,12 +502,12 @@ Public Class ProjectVM
          If nFlag = 0 Or nFlag = 3 Or nFlag = 4 Then
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
-         ' Altrimenti se richiesta visualizzazione DB utensili
+            ' Altrimenti se richiesta visualizzazione DB utensili
          ElseIf nFlag = 11 And bOk Then
             MyMachinePanelVM.ToolDb()
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
-         ' Altrimenti se richiesta visualizzazione DB lavorazioni
+            ' Altrimenti se richiesta visualizzazione DB lavorazioni
          ElseIf nFlag = 12 And bOk Then
             MyMachinePanelVM.MachDb()
             If bBeam Then
@@ -512,7 +517,7 @@ Public Class ProjectVM
             End If
             Map.refMachinePanelVM.SaveCurrentMachine()
             Map.refMainWindowVM.CloseApplicationCmd()
-         ' Altrimenti se errore
+            ' Altrimenti se errore
          ElseIf Not bOk Then
             EgtZoom(ZM.ALL)
          End If
@@ -1320,6 +1325,25 @@ Public Class ProjectVM
          If Not EgtIsSelectedObj(nId) Then m_Controller.MouseSelectedObj(nId, bLast)
       Else
          m_Controller.MouseSelectedObj(nId, bLast)
+         ' Recupero primo layer selezionato
+         Dim nFirstSelId As Integer = EgtGetFirstSelectedObj()
+         ' Se viene selezionato un layer diverso deseleziono il layer precedente
+         If nFirstSelId <> nId Then
+            SetLastInteger(nFirstSelId)
+            Map.refProjectVM.ExecuteCommand(Controller.CMD.DESELECTPARTLAYEROBJ)
+         End If
+         ' Selezione layer in albero
+         bSelObjOnScene = True
+         Map.refManageLayerExpanderVM.UpdateObjInObjTree(nId)
+         Map.refManageLayerExpanderVM.SelectIdInObjTree(nId)
+         Map.refManageLayerExpanderVM.UpdateObjTree()
+         Map.refProjectVM.ExecuteCommand(Controller.CMD.SETCURRPARTLAYER)
+
+         ' Cancello geometria e info di eventuale precedente analisi
+         Analyze.ClearAnalyzeGroup()
+         Map.refStatusBarVM.NotifyStatusOutput("")
+         EgtDraw()
+         bSelObjOnScene = False
       End If
    End Sub
 
@@ -1390,7 +1414,7 @@ Public Class ProjectVM
          If nFac <> -1 Then
             ' Visualizzo la normale e il contorno della faccia
             Analyze.CreateAnalyzeGroup()
-            Analyze.CreateNormal(nId, nFac)
+            Analyze.CreateFacetNormal(nId, nFac)
             Analyze.CreateFacetLoops(nId, nFac)
             ' Recupero i dati (in globale o griglia a seconda della impostazione)
             Dim ptC As Point3d
@@ -1405,6 +1429,27 @@ Public Class ProjectVM
                                  " / φ=" + DoubleToString(dPhi, 2) + " θ=" + DoubleToString(dTheta, 2)
             Map.refStatusBarVM.NotifyStatusOutput(sOut)
          End If
+         ' Se Regione, visualizzo dati parte toccata
+      ElseIf EgtGetType(nId) = GDB_TY.SRF_FRGN Then
+         Dim nChk As Integer = nSub
+         If nChk >= 0 AndAlso nChk < EgtSurfFrChunkCount(nId) Then
+            ' Visualizzo la normale e il contorno della parte
+            Analyze.CreateAnalyzeGroup()
+            Analyze.CreateChunkNormal(nId, nChk)
+            Analyze.CreateChunkLoops(nId, nChk)
+            ' Recupero i dati (in globale o griglia a seconda della impostazione)
+            Dim ptC As Point3d
+            Dim vtN As Vector3d
+            EgtSurfFrChunkCenter(nId, nChk, If(m_bCPlaneTypePos, GDB_ID.GRID, GDB_ID.ROOT), ptC, vtN)
+            Dim dLen, dPhi, dTheta As Double
+            vtN.ToSpherical(dLen, dTheta, dPhi)
+            ' Emetto info sulla barra di stato
+            Dim sOut As String = "Chunk " + nChk.ToString() +
+                                 " : C(" + LenToString(ptC.x, 3) + "," + LenToString(ptC.y, 3) + "," + LenToString(ptC.z, 3) + ")" +
+                                   " N(" + DoubleToString(vtN.x, 4) + "," + DoubleToString(vtN.y, 4) + "," + DoubleToString(vtN.z, 4) + ")" +
+                                 " / φ=" + DoubleToString(dPhi, 2) + " θ=" + DoubleToString(dTheta, 2)
+            Map.refStatusBarVM.NotifyStatusOutput(sOut)
+         End If
       End If
       ' Aggiorno la visualizzazione
       EgtDraw()

Special-BeamWall/Wall.vb

@@ -60,8 +60,8 @@ Module Wall
          Map.refTopCommandBarVM.SetMachiningMode()
          ' Se simulazione
          If bOk And nFlag = 2 Then
-            ' Se da TS3 impedisco di fare altro
+            ' Se da TS3 e non pezzo da Vista, impedisco di fare altro
-            If bBtl Then
+            If bBtl AndAlso sFile.IndexOf( "Part_", StringComparison.InvariantCulture) = -1 Then
                Map.refSimulationExpanderVM.bOnlySimulation = True
             End If
             ' Vado in simulazione

StructureDataForMessenger.vb

@@ -1,4 +1,6 @@
 Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib5.MachiningTreeViewItem
 
 Public Class PrepareInputBoxParam
    Friend sTitle As String
@@ -62,4 +64,112 @@ Public Class NewMachOpParam
       Me.SelMachOpId = SelMachOpId
    End Sub
 
+End Class
+
+Public Class InfoItem
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Friend nId As Integer
+   ''' <summary>
+   ''' Indice lista info note
+   ''' </summary>
+   Public ReadOnly Property Id As Integer
+      Get
+         Return Id
+      End Get
+   End Property
+
+   Friend sKey As String
+   ''' <summary>
+   ''' Chiave lista info note
+   ''' </summary>
+   Public ReadOnly Property Key As String
+      Get
+         Return sKey
+      End Get
+   End Property
+
+   Friend sValour As String
+   ''' <summary>
+   ''' Valore lista info note
+   ''' </summary>
+   Public Property Valour As String
+      Get
+         Return sValour
+      End Get
+      Set(value As String)
+         sValour = value
+         NotifyPropertyChanged(NameOf(Valour))
+      End Set
+   End Property
+
+#End Region    ' Fields & Properties
+
+   ' Comandi
+   Private m_cmdRemoveInfoItem As ICommand
+   Private m_cmdDoneInfo As ICommand
+
+#Region "CONSTRUCTORS"
+
+   Sub New(nId As Integer, sKey As String, sValue As String)
+      Me.nId = nId
+      Me.sKey = sKey
+      Me.sValour = sValue
+   End Sub
+
+#End Region    ' Constructors
+
+#Region "COMMANDS"
+
+#Region "RemoveItemNoteCommand"
+
+   ''' <summary>
+   ''' Comando per rimuovere l'informazione selezionata dalla combobox
+   ''' </summary>
+   Public ReadOnly Property RemoveInfoItemCommand As ICommand
+      Get
+         If m_cmdRemoveInfoItem Is Nothing Then
+            m_cmdRemoveInfoItem = New Command(AddressOf RemoveInfoItem)
+         End If
+         Return m_cmdRemoveInfoItem
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Rimuove l'informazione selezionata dalla combobox
+   ''' </summary>
+   ''' <param name="param"></param>
+   Public Sub RemoveInfoItem(ByVal param As Object)
+      Map.refInputExpanderVM.RemoveItemInfo(Me)
+   End Sub
+
+#End Region    ' RemoveItemNoteCommand
+
+#Region "DoneInfoCommand"
+
+   ''' <summary>
+   ''' Comando per la conferma modifica o aggiunta nuova informazione
+   ''' </summary>
+   Public ReadOnly Property DoneInfoCommand As ICommand
+      Get
+         If m_cmdDoneInfo Is Nothing Then
+            m_cmdDoneInfo = New Command(AddressOf DoneInfo)
+         End If
+         Return m_cmdDoneInfo
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Conferma modifica o aggiunta nuova informazione
+   ''' </summary>
+   Public Sub DoneInfo(ByVal param As Object)
+      Map.refInputExpanderVM.Done(Me)
+   End Sub
+
+#End Region    ' DoneInfoCommand
+
+#End Region    ' Commands
+
 End Class

Utility/Analyze.vb

@@ -37,7 +37,7 @@ Module Analyze
       Return True
    End Function
 
-   Function CreateNormal( nId As Integer, nFac As Integer) As Boolean
+   Function CreateFacetNormal( nId As Integer, nFac As Integer) As Boolean
       If m_AnaGrpId = GDB_ID.NULL Then Return False
       Dim bEnMod As Boolean = EgtGetEnableModified()
       EgtDisableModified()
@@ -66,6 +66,35 @@ Module Analyze
       Return True
    End Function
 
+   Function CreateChunkNormal( nId As Integer, nChk As Integer) As Boolean
+      If m_AnaGrpId = GDB_ID.NULL Then Return False
+      Dim bEnMod As Boolean = EgtGetEnableModified()
+      EgtDisableModified()
+      Dim ptC As Point3d
+      Dim vtN As Vector3d
+      If EgtSurfFrChunkCenter( nId, nChk, GDB_ID.ROOT, ptC, vtN) Then
+         Dim nNormId As Integer = EgtCreateGeoVector( m_AnaGrpId, 50 * vtN, ptC, GDB_RT.GLOB)
+         EgtSetColor( nNormId, New Color3d( 255, 0,0))
+      End If
+      If bEnMod Then EgtEnableModified()
+      Return True
+   End Function
+
+   Function CreateChunkLoops( nId As Integer, nChk As Integer) As Boolean
+      If m_AnaGrpId = GDB_ID.NULL Then Return False
+      Dim bEnMod As Boolean = EgtGetEnableModified()
+      EgtDisableModified()
+      Dim nCount As Integer
+      Dim nFirstId As Integer = EgtExtractSurfFrChunkLoops( nId, nChk, m_AnaGrpId, nCount)
+      If nFirstId <> GDB_ID.NULL Then
+         For nCrvId As Integer = nFirstId To nFirstId + nCount - 1
+            EgtSetColor( nCrvId, New Color3d( 255, 0,0))
+         Next
+      End If
+      If bEnMod Then EgtEnableModified()
+      Return True
+   End Function
+
    Function CreateCurveCompoPntNbrs( nId As Integer) As Boolean
       If m_AnaGrpId = GDB_ID.NULL Then Return False
       Dim bEnMod As Boolean = EgtGetEnableModified()

Utility/IniFile.vb

@@ -34,6 +34,14 @@ Public Module IniFile
       MACHPATH = 5
    End Enum
 
+   Public Enum VMillSelTypeOpt As Integer
+      LOWER = -2
+      LOW = -1
+      STANDARD = 0
+      HIGH = 1
+      HIGHER = 2
+   End Enum
+
    ' MainWindow Page
    Friend m_nInstance As Integer = 0
    Friend m_nUserLevel As Integer = 1