-
-
- <%: Title %>.
-Modify this template to jump-start your ASP.NET application.
- -
- To learn more about ASP.NET, visit http://asp.net.
- The page features videos, tutorials, and samples to help you get the most from ASP.NET.
- If you have any questions about ASP.NET visit
- our forums.
-
-
- Test datepicker
-
-
- test tabs!
-
-
-
-
-
- uno
-
-
- due
-
-
- tre
-
-
- quattro
-
-
- e cinque
-
- - -
+
+
+ <%: Title %>.
+Modify this template to jump-start your ASP.NET application.
+ +
+ To learn more about ASP.NET, visit http://asp.net.
+ The page features videos, tutorials, and samples to help you get the most from ASP.NET.
+ If you have any questions about ASP.NET visit
+ our forums.
+
+
+ Test datepicker
+
+
+ test tabs!
+
+
+
+
+
+ uno
+
+
+ due
+
+
+ tre
+
+
+ quattro
+
+
+ e cinque
+
+ + +
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- HKLM\Key\Full\Name +
- HKEY_LOCAL_MACHINE\Key\Full\Name +
- HKCU\Key\Full\Name +
- HKEY_CURRENT_USER\Key\Full\Name +
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ | Condition | +Foreground Color | +Background Color | +
|---|---|---|
| level == LogLevel.Fatal | +Red | +NoChange | +
| level == LogLevel.Error | +Yellow | +NoChange | +
| level == LogLevel.Warn | +Magenta | +NoChange | +
| level == LogLevel.Info | +White | +NoChange | +
| level == LogLevel.Debug | +Gray | +NoChange | +
| level == LogLevel.Trace | +DarkGray | +NoChange | +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+-
+
System.Data.SqlClient -SQL Sever Client
+ System.Data.SqlServerCe.3.5 -SQL Sever Compact 3.5
+ System.Data.OracleClient -Oracle Client from Microsoft (deprecated in .NET Framework 4)
+ Oracle.DataAccess.Client -ODP.NET provider from Oracle
+ System.Data.SQLite -System.Data.SQLite driver for SQLite
+ Npgsql -Npgsql driver for PostgreSQL
+ MySql.Data.MySqlClient -MySQL Connector/Net
+
-
+
sqlserver ,mssql ,microsoft ormsde - SQL Server Data Provider
+ oledb - OLEDB Data Provider
+ odbc - ODBC Data Provider
+
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${basedir}/${level}.log
+ All + a random value between 0 and 20 milliseconds - 2nd attempt
+ a random value between 0 and 40 milliseconds - 3rd attempt
+ a random value between 0 and 80 milliseconds - 4th attempt
+ ... + and so on. +
+ Caution: Enabling this option can considerably slow down your file
+ logging in multi-process scenarios. If only one process is going to
+ be writing to the file, consider setting
+ To set up the target in the configuration file, + use the following syntax: +
++ The result is: +
+
+ + To set up the log target programmatically similar to above use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ Mail target works best when used with BufferingWrapper target + which lets you send multiple log messages in single mail +
++ To set up the buffered mail target in the configuration file, + use the following syntax: +
++ To set up the buffered mail target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
+
+ + The result is: +
+ To set up the target with coloring rules in the configuration file, + use the following syntax: +
+
+
+
+ + The result is: +
+ To set up the log target programmatically similar to above use code like this: +
+
+ ,
+
+
+ for RowColoring,
+
+
+ for WordColoring
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- HKLM\Key\Full\Name +
- HKEY_LOCAL_MACHINE\Key\Full\Name +
- HKCU\Key\Full\Name +
- HKEY_CURRENT_USER\Key\Full\Name +
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ | Condition | +Foreground Color | +Background Color | +
|---|---|---|
| level == LogLevel.Fatal | +Red | +NoChange | +
| level == LogLevel.Error | +Yellow | +NoChange | +
| level == LogLevel.Warn | +Magenta | +NoChange | +
| level == LogLevel.Info | +White | +NoChange | +
| level == LogLevel.Debug | +Gray | +NoChange | +
| level == LogLevel.Trace | +DarkGray | +NoChange | +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+-
+
System.Data.SqlClient -SQL Sever Client
+ System.Data.SqlServerCe.3.5 -SQL Sever Compact 3.5
+ System.Data.OracleClient -Oracle Client from Microsoft (deprecated in .NET Framework 4)
+ Oracle.DataAccess.Client -ODP.NET provider from Oracle
+ System.Data.SQLite -System.Data.SQLite driver for SQLite
+ Npgsql -Npgsql driver for PostgreSQL
+ MySql.Data.MySqlClient -MySQL Connector/Net
+
-
+
sqlserver ,mssql ,microsoft ormsde - SQL Server Data Provider
+ oledb - OLEDB Data Provider
+ odbc - ODBC Data Provider
+
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${basedir}/${level}.log
+ All + a random value between 0 and 20 milliseconds - 2nd attempt
+ a random value between 0 and 40 milliseconds - 3rd attempt
+ a random value between 0 and 80 milliseconds - 4th attempt
+ ... + and so on. +
+ Caution: Enabling this option can considerably slow down your file
+ logging in multi-process scenarios. If only one process is going to
+ be writing to the file, consider setting
+ To set up the target in the configuration file, + use the following syntax: +
++ The result is: +
+
+ + To set up the log target programmatically similar to above use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ Mail target works best when used with BufferingWrapper target + which lets you send multiple log messages in single mail +
++ To set up the buffered mail target in the configuration file, + use the following syntax: +
++ To set up the buffered mail target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
+
+ + The result is: +
+ To set up the target with coloring rules in the configuration file, + use the following syntax: +
+
+
+
+ + The result is: +
+ To set up the log target programmatically similar to above use code like this: +
+
+ ,
+
+
+ for RowColoring,
+
+
+ for WordColoring
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- HKLM\Key\Full\Name +
- HKEY_LOCAL_MACHINE\Key\Full\Name +
- HKCU\Key\Full\Name +
- HKEY_CURRENT_USER\Key\Full\Name +
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ | Condition | +Foreground Color | +Background Color | +
|---|---|---|
| level == LogLevel.Fatal | +Red | +NoChange | +
| level == LogLevel.Error | +Yellow | +NoChange | +
| level == LogLevel.Warn | +Magenta | +NoChange | +
| level == LogLevel.Info | +White | +NoChange | +
| level == LogLevel.Debug | +Gray | +NoChange | +
| level == LogLevel.Trace | +DarkGray | +NoChange | +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+-
+
System.Data.SqlClient -SQL Sever Client
+ System.Data.SqlServerCe.3.5 -SQL Sever Compact 3.5
+ System.Data.OracleClient -Oracle Client from Microsoft (deprecated in .NET Framework 4)
+ Oracle.DataAccess.Client -ODP.NET provider from Oracle
+ System.Data.SQLite -System.Data.SQLite driver for SQLite
+ Npgsql -Npgsql driver for PostgreSQL
+ MySql.Data.MySqlClient -MySQL Connector/Net
+
-
+
sqlserver ,mssql ,microsoft ormsde - SQL Server Data Provider
+ oledb - OLEDB Data Provider
+ odbc - ODBC Data Provider
+
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${basedir}/${level}.log
+ All + a random value between 0 and 20 milliseconds - 2nd attempt
+ a random value between 0 and 40 milliseconds - 3rd attempt
+ a random value between 0 and 80 milliseconds - 4th attempt
+ ... + and so on. +
+ Caution: Enabling this option can considerably slow down your file
+ logging in multi-process scenarios. If only one process is going to
+ be writing to the file, consider setting
+ To set up the target in the configuration file, + use the following syntax: +
++ The result is: +
+
+ + To set up the log target programmatically similar to above use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ Mail target works best when used with BufferingWrapper target + which lets you send multiple log messages in single mail +
++ To set up the buffered mail target in the configuration file, + use the following syntax: +
++ To set up the buffered mail target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
+
+ + The result is: +
+ To set up the target with coloring rules in the configuration file, + use the following syntax: +
+
+
+
+ + The result is: +
+ To set up the log target programmatically similar to above use code like this: +
+
+ ,
+
+
+ for RowColoring,
+
+
+ for WordColoring
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- HKLM\Key\Full\Name +
- HKEY_LOCAL_MACHINE\Key\Full\Name +
- HKCU\Key\Full\Name +
- HKEY_CURRENT_USER\Key\Full\Name +
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ | Condition | +Foreground Color | +Background Color | +
|---|---|---|
| level == LogLevel.Fatal | +Red | +NoChange | +
| level == LogLevel.Error | +Yellow | +NoChange | +
| level == LogLevel.Warn | +Magenta | +NoChange | +
| level == LogLevel.Info | +White | +NoChange | +
| level == LogLevel.Debug | +Gray | +NoChange | +
| level == LogLevel.Trace | +DarkGray | +NoChange | +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+-
+
System.Data.SqlClient -SQL Sever Client
+ System.Data.SqlServerCe.3.5 -SQL Sever Compact 3.5
+ System.Data.OracleClient -Oracle Client from Microsoft (deprecated in .NET Framework 4)
+ Oracle.DataAccess.Client -ODP.NET provider from Oracle
+ System.Data.SQLite -System.Data.SQLite driver for SQLite
+ Npgsql -Npgsql driver for PostgreSQL
+ MySql.Data.MySqlClient -MySQL Connector/Net
+
-
+
sqlserver ,mssql ,microsoft ormsde - SQL Server Data Provider
+ oledb - OLEDB Data Provider
+ odbc - ODBC Data Provider
+
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${basedir}/${level}.log
+ All + a random value between 0 and 20 milliseconds - 2nd attempt
+ a random value between 0 and 40 milliseconds - 3rd attempt
+ a random value between 0 and 80 milliseconds - 4th attempt
+ ... + and so on. +
+ Caution: Enabling this option can considerably slow down your file
+ logging in multi-process scenarios. If only one process is going to
+ be writing to the file, consider setting
+ To set up the target in the configuration file, + use the following syntax: +
++ The result is: +
+
+ + To set up the log target programmatically similar to above use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ Mail target works best when used with BufferingWrapper target + which lets you send multiple log messages in single mail +
++ To set up the buffered mail target in the configuration file, + use the following syntax: +
++ To set up the buffered mail target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
+
+ + The result is: +
+ To set up the target with coloring rules in the configuration file, + use the following syntax: +
+
+
+
+ + The result is: +
+ To set up the log target programmatically similar to above use code like this: +
+
+ ,
+
+
+ for RowColoring,
+
+
+ for WordColoring
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${basedir}/${level}.log
+ All + a random value between 0 and 20 milliseconds - 2nd attempt
+ a random value between 0 and 40 milliseconds - 3rd attempt
+ a random value between 0 and 80 milliseconds - 4th attempt
+ ... + and so on. +
+ Caution: Enabling this option can considerably slow down your file
+ logging in multi-process scenarios. If only one process is going to
+ be writing to the file, consider setting
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
+
+
+ .
-
+
- ApplicationData - roaming application data for current user. +
- CommonApplicationData - application data for all users. +
- MyDocuments - My Documents +
- DesktopDirectory - Desktop directory +
- LocalApplicationData - non roaming application data +
- Personal - user profile directory +
- System - System directory +
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will crawl. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To print the results, use any application that's able to receive messages over + TCP or UDP. NetCat is + a simple but very powerful command-line tool that can be used for that. This image + demonstrates the NetCat tool receiving log messages from Network target. +
+
+ + NOTE: If your receiver application is ever likely to be off-line, don't use TCP protocol + or you'll get TCP timeouts and your application will be very slow. + Either switch to UDP transport or use AsyncWrapper target + so that your application threads will not be blocked by the timing-out connection attempts. +
++ There are two specialized versions of the Network target: Chainsaw + and NLogViewer which write to instances of Chainsaw log4j viewer + or NLogViewer application respectively. +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ -
+
- tcp://host:port - TCP (auto select IPv4/IPv6) (not supported on Windows Phone 7.0) +
- tcp4://host:port - force TCP/IPv4 (not supported on Windows Phone 7.0) +
- tcp6://host:port - force TCP/IPv6 (not supported on Windows Phone 7.0) +
- udp://host:port - UDP (auto select IPv4/IPv6, not supported on Silverlight and on Windows Phone 7.0) +
- udp4://host:port - force UDP/IPv4 (not supported on Silverlight and on Windows Phone 7.0) +
- udp6://host:port - force UDP/IPv6 (not supported on Silverlight and on Windows Phone 7.0) +
- http://host:port/pageName - HTTP using POST verb +
- https://host:port/pageName - HTTPS using POST verb +
${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${longdate}|${level:uppercase=true}|${logger}|${message}
+ ${basedir}/${level}.log
+ All + a random value between 0 and 20 milliseconds - 2nd attempt
+ a random value between 0 and 40 milliseconds - 3rd attempt
+ a random value between 0 and 80 milliseconds - 4th attempt
+ ... + and so on. +
+ Caution: Enabling this option can considerably slow down your file
+ logging in multi-process scenarios. If only one process is going to
+ be writing to the file, consider setting
+ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ The result is a message box: +
+
+ + To set up the log target programmatically use code like this: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ + To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
++ To set up the target in the configuration file, + use the following syntax: +
++ This assumes just one target and a single rule. More configuration + options are described here. +
++ To set up the log target programmatically use code like this: +
+The example web service that works with this example is shown below
++ Asynchronous target wrapper allows the logger code to execute more quickly, by queueing + messages and processing them in a separate thread. You should wrap targets + that spend a non-trivial amount of time in their Write() method with asynchronous + target to speed up logging. +
++ Because asynchronous logging is quite a common scenario, NLog supports a + shorthand notation for wrapping all targets with AsyncWrapper. Just add async="true" to + the <targets/> element in the configuration file. +
+
+
+ ... your targets go here ...
+
+ ]]>
+ + To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+${longdate}|${level:uppercase=true}|${logger}|${message}
+ This example causes the messages to be written to server1, + and if it fails, messages go to server2.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages not contains the string '1' to be ignored.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
++ This example works like this. If there are no Warn,Error or Fatal messages in the buffer + only Info messages are written to the file, but if there are any warnings or errors, + the output includes detailed trace (levels >= Debug). You can plug in a different type + of buffering wrapper (such as ASPNetBufferingWrapper) to achieve different + functionality. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt + chosen randomly on a per-message basis. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each log message to be repeated 3 times.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes each write attempt to be repeated 3 times, + sleeping 1 second between attempts if first one fails.
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to either file1.txt or file2.txt. + Each odd message is written to file2.txt, each even message goes to file1.txt. +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+This example causes the messages to be written to both file1.txt or file2.txt +
++ To set up the target in the configuration file, + use the following syntax: +
++ The above examples assume just one target and a single rule. See below for + a programmatic configuration that's equivalent to the above config file: +
+