DataWall/LuaLibs/WMachiningLib.lua

-- MachiningLib.lua by Egaltech s.r.l. 2022/01/12
-- Libreria ricerca lavorazioni per Pareti
-- 2023/03/09 Piccola correzione alla SideDepth in FindMilling
--            In FindMilling aggiunta gestione spessore e massimo materiale nel caso di lam
-- 2023/05/25 Aggiunta funzione AddMachining che incapsula EgtAddMachining trascrivendo le priorità btl dalle feature alle lavorazioni.
-- 2023/06/07 Alla funzione AddMachining aggiunta la scrittura dell'info ISOUTLINE alle lavorazioni.

-- Tabella per definizione modulo
local WMachiningLib = {}

-- Include
require( 'EgtBase')

EgtOutLog( ' WMachiningLib started', 1)

-- Dati
local WD = require( 'WallData')
local Cuttings = require( 'CutData')
local Millings = require( 'MillingData')
local Pocketings = require( 'PocketingData')
local Sawings = require( 'SawingData')
local Drillings = require( 'DrillData')
local Surfacings
if EgtExistsFile( EgtGetCurrMachineDir() .. '\\Wall\\SurfacingData.lua') then
   Surfacings = require( 'SurfacingData')
end

---------------------------------------------------------------------
local function SetCurrMachiningAndTool( sMachName)
   if not EgtMdbSetCurrMachining( sMachName) then return false end
   local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
   local sTool = EgtTdbGetToolFromUUID( sTuuid)
   if not sTool then return false end
   if not EgtTdbSetCurrTool( sTool) then return false end
   return EgtTdbGetCurrToolParam( MCH_TP.ACTIVE)
end

---------------------------------------------------------------------
function WMachiningLib.FindCutting( sType, dDepth, nTool_ID)
   for i = 1, #Cuttings do
      local Cutting = Cuttings[i]
      if Cutting.On and Cutting.Type == sType and SetCurrMachiningAndTool( Cutting.Name) then
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE)
         local dSawDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or 0
         local dSawThick = EgtTdbGetCurrToolParam( MCH_TP.THICK) or 0
         local dSawMaxDepth = EgtTdbGetCurrToolMaxDepth() or 0
         local nMyTool_ID = EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'Tool_ID', 'i') 
         if nMchType == MCH_MY.SAWING and
            ( not dDepth or dSawMaxDepth > dDepth - 10 * GEO.EPS_SMALL) and
            ( not nTool_ID or nTool_ID == 0 or nTool_ID == nMyTool_ID) then
            return Cutting.Name, dSawDiam, dSawThick, dSawMaxDepth
         end
      end
   end
end

---------------------------------------------------------------------
function WMachiningLib.FindMilling( sType, dDepth, sTuuid, nTool_ID, dMaxDiam, dMaxMat, bTipFeed, dMinSideElev)
   for i = 1, #Millings do
      local Milling = Millings[i]
      if Milling.On and Milling.Type == sType and SetCurrMachiningAndTool( Milling.Name) then
         local bIsBlade = ( EgtTdbGetCurrToolParam( MCH_TP.TYPE) & MCH_TF.SAWBLADE ~= 0) or false
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE)
         local sMyTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
         local dTMaxMat = EgtIf( bIsBlade, EgtTdbGetCurrToolParam( MCH_TP.THICK), EgtTdbGetCurrToolParam( MCH_TP.MAXMAT))
         local dTMaxDepth = EgtIf( WD.MILL_MAX_DEPTH_AS_MAT, dTMaxMat, EgtTdbGetCurrToolMaxDepth())
         local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
         local dTDiamTh = EgtTdbGetCurrToolThDiam() or 0
         local dTTipFeed = EgtTdbGetCurrToolParam( MCH_TP.TIPFEED)
         local dTMaxDepthOnSide = EgtIf( bIsBlade, EgtTdbGetCurrToolParam( MCH_TP.MAXMAT), min( EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'SIDEDEPTH', 'd') or 999, 0.5 * ( dTDiam - dTDiamTh)))
         local nMyTool_ID = EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'Tool_ID', 'i')
         if nMchType == MCH_MY.MILLING and
            ( not sTuuid or sTuuid == sMyTuuid) and
            ( not dDepth or dTMaxDepth > dDepth - GEO.EPS_SMALL) and
            ( not dMaxDiam or dTDiam < dMaxDiam + GEO.EPS_SMALL) and
            ( not dMaxMat or dTMaxMat < dMaxMat + GEO.EPS_SMALL) and
            ( not bTipFeed or dTTipFeed > 1) and
            ( not dMinSideElev or dTMaxDepthOnSide > dMinSideElev - GEO.EPS_SMALL) and
            ( not nTool_ID or nTool_ID == 0 or nTool_ID == nMyTool_ID) then
            return Milling.Name, dTMaxDepth, dTMaxMat, dTDiam
         end
      end
   end
end

---------------------------------------------------------------------
function WMachiningLib.FindNailing( nType)
   for i = 1, #Millings do
      local Milling = Millings[i]
      if Milling.On and Milling.Type == 'Nailing' and SetCurrMachiningAndTool( Milling.Name) then
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE)
         local sTName = EgtTdbGetCurrToolParam( MCH_TP.NAME)
         if nMchType == MCH_MY.MILLING and
            sTName == tostring( nType) then
            return Milling.Name
         end
      end
   end
end

---------------------------------------------------------------------
function WMachiningLib.FindPocketing( sType, dMaxDiam, dDepth, nTool_ID)
   for i = 1, #Pocketings do
      local Pocketing = Pocketings[i]
      if Pocketing.On and Pocketing.Type == sType and SetCurrMachiningAndTool( Pocketing.Name) then
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE)
         local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
         local dTMaxDepth = EgtIf( WD.MILL_MAX_DEPTH_AS_MAT, EgtTdbGetCurrToolParam( MCH_TP.MAXMAT), EgtTdbGetCurrToolMaxDepth())
         local nMyTool_ID = EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'Tool_ID', 'i') 
         if nMchType == MCH_MY.POCKETING and
            ( not dMaxDiam or dTDiam < dMaxDiam + GEO.EPS_SMALL) and
            ( not dDepth or dTMaxDepth > dDepth - GEO.EPS_SMALL) and
            ( not nTool_ID or nTool_ID == 0 or nTool_ID == nMyTool_ID) then
            return Pocketing.Name, dTDiam, dTMaxDepth
         end
      end
   end
end

---------------------------------------------------------------------
function WMachiningLib.FindSawing( sType)
   for i = 1, #Sawings do
      local Sawing = Sawings[i]
      if Sawing.On and Sawing.Type == sType and SetCurrMachiningAndTool( Sawing.Name) then
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE) 
         if nMchType == MCH_MY.MORTISING then
            return Sawing.Name
         end
      end
   end
end

---------------------------------------------------------------------
function WMachiningLib.FindDrilling( dDiam, dDepth, sHead, bOnlyPockets)
   if bOnlyPockets == nil or not bOnlyPockets then
      -- ricerca sulle forature, dal diametro maggiore al minore
      for i = #Drillings, 1, -1 do
         local Drilling = Drillings[i]
         if Drilling.On and Drilling.Type == 'Drill' and SetCurrMachiningAndTool( Drilling.Name) then
            local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE) 
            local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
            local dTMaxMat = EgtTdbGetCurrToolParam( MCH_TP.MAXMAT)
            local sMyHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
            if nMchType == MCH_MY.DRILLING and
               dTDiam < dDiam + 10 * GEO.EPS_SMALL  and  dTDiam > dDiam - WD.DRILL_TOL - 10 * GEO.EPS_SMALL and
               ( not dDepth or dTMaxMat > dDepth - GEO.EPS_SMALL) and
               (( not sHead and sMyHead ~= 'H5' and sMyHead ~= 'H6') or sHead == sMyHead) then
               return Drilling.Name, Drilling.Type, dTMaxMat
            end
         end
      end
   end
   -- ricerca sulle svuotature, dal diametro maggiore al minore
   for i = #Drillings, 1, -1 do
      local Drilling = Drillings[i]
      if Drilling.On and Drilling.Type == 'Pocket' and SetCurrMachiningAndTool( Drilling.Name) then
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE)
         local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
         local dTMaxDepth = EgtIf( WD.MILL_MAX_DEPTH_AS_MAT, EgtTdbGetCurrToolParam( MCH_TP.MAXMAT), EgtTdbGetCurrToolMaxDepth())
         local sMyHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
         if nMchType == MCH_MY.POCKETING and
            dTDiam < dDiam - 10 * GEO.EPS_SMALL and
            ( not dDepth or dTMaxDepth > dDepth - GEO.EPS_SMALL) and
            ( ( not sHead and sMyHead ~= 'H5' and sMyHead ~= 'H6') or sHead == sMyHead) then
            return Drilling.Name, Drilling.Type, dTMaxDepth
         end
      end
   end
end

---------------------------------------------------------------------
function WMachiningLib.FindSurfacing( sType)
   if not Surfacings then return end
   for i = 1, #Surfacings do
      local Surfacing = Surfacings[i]
      if Surfacing.On and Surfacing.Type == sType and SetCurrMachiningAndTool( Surfacing.Name) then
         local nMchType = EgtMdbGetCurrMachiningParam( MCH_MP.TYPE)
         if nMchType == MCH_MY.SURFFINISHING then
            return Surfacing.Name
         end
      end
   end
end

-- incapsulo EgtAddMachining e trascrivo alcune informazioni utili nelle note dell'operazione
---------------------------------------------------------------------
function WMachiningLib.AddMachining( Proc, sName, sMachining)
   local nMchId, sFinalName = EgtAddMachining( sName, sMachining)
   local nPriority = EgtGetInfo( Proc.Id, 'PRIORITY', 'i')
   EgtSetInfo( nMchId, 'PRIORITY', nPriority)
   EgtSetInfo( nMchId, 'ISOUTLINE', Proc.IsOutline)
   return nMchId, sFinalName
end

-------------------------------------------------------------------------------------------------------------
return WMachiningLib