2.5c4

- in LapJoint Gestito caso riconoscimento errato Stype 3
- piccola correzione a MachiningLib -> FindMilling

.gitignore

@@ -13,12 +13,9 @@
 /Debug64
 /Release64
 /ipch
-/bin
 /obj
 /.vs
-/32/*.lua
+/bin/*.lua
-/32/LuaLibs/*.lua
+/bin/*.ini
-/32/Images/*.png
+/bin/LuaLibs/*.lua
-/64/*.lua
+/bin/Images/*.png
-/64/LuaLibs/*.lua
-/64/Images/*.png

.gitlab-ci.yml

@@ -7,60 +7,33 @@ variables:
  NET_USERQ: 'steamw\egalware'
 
 #Note compilazione LUA:
-# lua53 -o 32\$FileName -s $FileName: -o = output, -s = NON include i debug symbols
+# lua54 -o bin\$FileName -s $FileName: -o = output, -s = NON include i debug symbols
 
-# helper compilazione LUA a 32 bit
+# helper compilazione LUA a 32 e 64 bit
-.LuaCompile32: &LuaCompile32
+.LuaCompile: &LuaCompile
   - |
-    Set-Alias lua53  C:\Tools\Lua32\luac53
+    Set-Alias lua54  C:\Tools\Lua32\luac54
     echo "Copia file *.ini"
     $FileList = Get-ChildItem("*.ini")
     ForEach ($File in $FileList) {
       $FileName = Split-Path $File -leaf
-      Copy-Item -Path $FileName -Destination 32\$FileName
+      Copy-Item -Path $FileName -Destination bin\$FileName
-      echo "Copy-Item -Path $FileName -Destination 32\$FileName"
+      echo "Copy-Item -Path $FileName -Destination bin\$FileName"
     }
-    echo "Compilazione file *.lua 32bit"
+    echo "Compilazione file *.lua 32/64bit"
     $FileList = Get-ChildItem("*.lua")
     ForEach ($File in $FileList) {
       $FileName = Split-Path $File -leaf
-      lua53 -o 32\$FileName $FileName
+      lua54 -o bin\$FileName $FileName
-      echo "lua53 -o 32\$FileName $FileName"
+      echo "lua54 -o bin\$FileName $FileName"
     }
     $FileList = Get-ChildItem("LuaLibs\*.lua")
     ForEach ($File in $FileList) {
       $FileName = Split-Path $File -leaf
-      lua53 -o 32\LuaLibs\$FileName LuaLibs\$FileName
+      lua54 -o bin\LuaLibs\$FileName LuaLibs\$FileName
-      echo "lua53 -o 32\LuaLibs\$FileName LuaLibs\$FileName"
+      echo "lua54 -o bin\LuaLibs\$FileName LuaLibs\$FileName"
     }
 
-# helper compilazione LUA a 64 bit
-.LuaCompile64: &LuaCompile64
-  - |
-    Set-Alias lua53  C:\Tools\Lua64\luac53
-    echo "Copia file *.ini"
-    $FileList = Get-ChildItem("*.ini")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      Copy-Item -Path $FileName -Destination 64\$FileName
-      echo "Copy-Item -Path $FileName -Destination 64\$FileName"
-    }
-    echo "Compilazione file *.lua 64bit"
-    $FileList = Get-ChildItem("*.lua")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      lua53 -o 64\$FileName $FileName
-      echo "lua53 -o 64\$FileName $FileName"
-    }
-    $FileList = Get-ChildItem("LuaLibs\*.lua")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      lua53 -o 64\LuaLibs\$FileName LuaLibs\$FileName
-      echo "lua53 -o 64\LuaLibs\$FileName LuaLibs\$FileName"
-    }
-
-#      Copy-Item -Path $FileName -Destination 64\$FileName
-#      echo "Copy-Item -Path $FileName -Destination 64\$FileName"
 # helper copia SORGENTI verso cartella di rete R:\ dei SORGENTI
 .CodeReplicaR: &CodeReplicaR
   - |
@@ -70,28 +43,23 @@ variables:
     SLEEP 2
     net use R: /delete
 
-
+# helper copia script verso cartella di rete R:\ delle cartelle bin
-# helper copia script verso cartella di rete R:\ delle cartelle 32 e 64
 .ReplicaR: &ReplicaR
   - |
     net use R: /delete
     net use R: $env:NET_SHARE_R /u:$env:NET_USERQ $ZDRIVE_PASSWD
-    ROBOCOPY /MIR 32 R:\EgtData\$env:APP_NAME\32
+    ROBOCOPY /MIR bin R:\EgtData\$env:APP_NAME\bin
-    ROBOCOPY /MIR 64 R:\EgtData\$env:APP_NAME\64
+    ROBOCOPY /MIR Images R:\EgtData\$env:APP_NAME\bin\Images
-    ROBOCOPY /MIR Images R:\EgtData\$env:APP_NAME\32\Images
-    ROBOCOPY /MIR Images R:\EgtData\$env:APP_NAME\64\Images
     SLEEP 2
     net use R: /delete
 
-# helper copia script verso cartella di rete R:\ delle cartelle 32 e 64
+# helper copia script verso cartella di rete R:\ delle cartelle bin
 .ReplicaZ: &ReplicaZ
   - |
     net use Z: /delete
     net use Z: $env:NET_SHARE_Z /u:$env:NET_USERQ $ZDRIVE_PASSWD
-    ROBOCOPY /MIR 32 Z:\EgtData\$env:APP_NAME\32
+    ROBOCOPY /MIR bin Z:\EgtData\$env:APP_NAME\bin
-    ROBOCOPY /MIR 64 Z:\EgtData\$env:APP_NAME\64
+    ROBOCOPY /MIR Images Z:\EgtData\$env:APP_NAME\bin\Images
-    ROBOCOPY /MIR Images Z:\EgtData\$env:APP_NAME\32\Images
-    ROBOCOPY /MIR Images Z:\EgtData\$env:APP_NAME\64\Images
     SLEEP 2
     net use Z: /delete
 
@@ -100,15 +68,13 @@ stages:
 
 LuaCompile:build:
  stage: build
-# only:
+ only:
-#   - main
+   - main
-#   - master
+   - master
  tags:
    - win
  script:    
-   - *LuaCompile32
+   - *LuaCompile
-   - *LuaCompile64
    - *CodeReplicaR
    - *ReplicaR
    - *ReplicaZ
-   

Compile.bat

@@ -1,53 +1,29 @@
 
-REM Compilazione degli script Wall Egaltech                         2022.05.09
+REM Compilazione degli script Wall Egaltech                         2023.02.27
 REM Per togliere info di debug aggiungere flag -s prima del nome del file di input
 
-REM Compilazione 32 bit
+REM Compilazione 32 e 64 bit
 
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WallExec.lua                      LuaLibs\WallExec.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WallExec.lua                      LuaLibs\WallExec.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WallLib.lua                       LuaLibs\WallLib.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WallLib.lua                       LuaLibs\WallLib.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WMachiningLib.lua                 LuaLibs\WMachiningLib.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WMachiningLib.lua                 LuaLibs\WMachiningLib.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessCut.lua                   LuaLibs\WProcessCut.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessCut.lua                   LuaLibs\WProcessCut.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessDoubleCut.lua             LuaLibs\WProcessDoubleCut.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDoubleCut.lua             LuaLibs\WProcessDoubleCut.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessDrill.lua                 LuaLibs\WProcessDrill.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDrill.lua                 LuaLibs\WProcessDrill.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessDtMortise.lua             LuaLibs\WProcessDtMortise.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessDtMortise.lua             LuaLibs\WProcessDtMortise.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessFreeContour.lua           LuaLibs\WProcessFreeContour.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessFreeContour.lua           LuaLibs\WProcessFreeContour.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessLapJoint.lua              LuaLibs\WProcessLapJoint.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessLapJoint.lua              LuaLibs\WProcessLapJoint.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessMark.lua                  LuaLibs\WProcessMark.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessMark.lua                  LuaLibs\WProcessMark.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessMortise.lua               LuaLibs\WProcessMortise.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessMortise.lua               LuaLibs\WProcessMortise.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessSawCut.lua                LuaLibs\WProcessSawCut.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessSawCut.lua                LuaLibs\WProcessSawCut.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessText.lua                  LuaLibs\WProcessText.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessText.lua                  LuaLibs\WProcessText.lua
-\EgtProg\Dll32\luac53 -o 32\LuaLibs\WProcessVariant.lua               LuaLibs\WProcessVariant.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\WProcessVariant.lua               LuaLibs\WProcessVariant.lua
-\EgtProg\Dll32\luac53 -o 32\BatchProcess.lua                          BatchProcess.lua
+\EgtProg\Dll32\luac54 -o bin\BatchProcess.lua                          BatchProcess.lua
-\EgtProg\Dll32\luac53 -o 32\BatchProcessNew.lua                       BatchProcessNew.lua
+\EgtProg\Dll32\luac54 -o bin\BatchProcessNew.lua                       BatchProcessNew.lua
-\EgtProg\Dll32\luac53 -o 32\GetWallData.lua                           GetWallData.lua
+\EgtProg\Dll32\luac54 -o bin\GetWallData.lua                           GetWallData.lua
-\EgtProg\Dll32\luac53 -o 32\NestFlipAndRotate.lua                     NestFlipAndRotate.lua
+\EgtProg\Dll32\luac54 -o bin\NestFlipAndRotate.lua                     NestFlipAndRotate.lua
-\EgtProg\Dll32\luac53 -o 32\NestProcess.lua                           NestProcess.lua
+\EgtProg\Dll32\luac54 -o bin\NestProcess.lua                           NestProcess.lua
-\EgtProg\Dll32\luac53 -o 32\Overturn.lua                              Overturn.lua
+\EgtProg\Dll32\luac54 -o bin\Overturn.lua                              Overturn.lua
-\EgtProg\Dll32\luac53 -o 32\Process.lua                               Process.lua
+\EgtProg\Dll32\luac54 -o bin\Process.lua                               Process.lua
-\EgtProg\Dll32\luac53 -o 32\Rotate.lua                                Rotate.lua
+\EgtProg\Dll32\luac54 -o bin\Rotate.lua                                Rotate.lua
-
+\EgtProg\Dll32\luac54 -o bin\Version.lua                               Version.lua
-REM Compilazione 64 bit
-
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WallExec.lua                      LuaLibs\WallExec.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WallLib.lua                       LuaLibs\WallLib.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WMachiningLib.lua                 LuaLibs\WMachiningLib.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessCut.lua                   LuaLibs\WProcessCut.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessDoubleCut.lua             LuaLibs\WProcessDoubleCut.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessDrill.lua                 LuaLibs\WProcessDrill.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessDtMortise.lua             LuaLibs\WProcessDtMortise.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessFreeContour.lua           LuaLibs\WProcessFreeContour.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessLapJoint.lua              LuaLibs\WProcessLapJoint.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessMark.lua                  LuaLibs\WProcessMark.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessMortise.lua               LuaLibs\WProcessMortise.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessSawCut.lua                LuaLibs\WProcessSawCut.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessText.lua                  LuaLibs\WProcessText.lua
-\EgtProg\Dll64\luac53 -o 64\LuaLibs\WProcessVariant.lua               LuaLibs\WProcessVariant.lua
-\EgtProg\Dll64\luac53 -o 64\BatchProcess.lua                          BatchProcess.lua
-\EgtProg\Dll64\luac53 -o 64\BatchProcessNew.lua                       BatchProcessNew.lua
-\EgtProg\Dll64\luac53 -o 64\GetWallData.lua                           GetWallData.lua
-\EgtProg\Dll64\luac53 -o 64\NestFlipAndRotate.lua                     NestFlipAndRotate.lua
-\EgtProg\Dll64\luac53 -o 64\NestProcess.lua                           NestProcess.lua
-\EgtProg\Dll64\luac53 -o 64\Overturn.lua                              Overturn.lua
-\EgtProg\Dll64\luac53 -o 64\Process.lua                               Process.lua
-\EgtProg\Dll64\luac53 -o 64\Rotate.lua                                Rotate.lua

GetWallData.lua

@@ -1,4 +1,4 @@
--- GetWallData.lua by Egaltech s.r.l. 2022/06/28
+-- GetWallData.lua by Egaltech s.r.l. 2023/03/08
 -- Recupero dati da file WallData.lua di macchina
 
 -- Intestazioni
@@ -37,6 +37,8 @@ local WD = require( 'WallData')
 -- Assegno valori di interesse
 GWD.SIMUL_VIEW_DIR = WD.SIMUL_VIEW_DIR
 GWD.ORIG_CORNER = WD.ORIG_CORNER
+GWD.DELTA_X = WD.DELTA_X
+GWD.DELTA_Y = WD.DELTA_Y
 GWD.NESTING_CORNER = WD.NESTING_CORNER
 GWD.HOR_DRILL_DIAM = WD.HOR_DRILL_DIAM
 GWD.MIN_HEIGHT = WD.MIN_HEIGHT

LuaLibs/WMachiningLib.lua

@@ -2,6 +2,7 @@
 -- Libreria ricerca lavorazioni per Pareti
 
 -- Tabella per definizione modulo
+-- 2023/03/09 Piccola correzione alla SideDepth in FindMilling
 local WMachiningLib = {}
 
 -- Include
@@ -62,7 +63,7 @@ function WMachiningLib.FindMilling( sType, dDepth, sTuuid, nTool_ID, dMaxDiam, d
          local dTDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
          local dTDiamTh = EgtTdbGetCurrToolThDiam() or 0
          local dTTipFeed = EgtTdbGetCurrToolParam( MCH_TP.TIPFEED)
-         local dTMaxDepthOnSide = min( EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'SIDEDEPTH', 'd') or 0, 0.5 * ( dTDiam - dTDiamTh))
+         local dTMaxDepthOnSide = min( EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'SIDEDEPTH', 'd') or 999, 0.5 * ( dTDiam - dTDiamTh))
          local nMyTool_ID = EgtTdbGetCurrToolValInNotes( MCH_TP.USERNOTES, 'Tool_ID', 'i')
          if nMchType == MCH_MY.MILLING and
             ( not sTuuid or sTuuid == sMyTuuid) and

LuaLibs/WProcessFreeContour.lua

@@ -1,4 +1,4 @@
--- ProcessFreeContour.lua by Egaltech s.r.l. 2022/08/29
+-- ProcessFreeContour.lua by Egaltech s.r.l. 2023/03/08
 -- Gestione calcolo profilo libero per Pareti
 -- 2021/11/15 Penna e chiodature sono sempre riportate sulla faccia sopra anche se nel progetto sono sotto.
 -- 2021/12/10 In taglio con lama aggiunta gestione SCC per testa Gearbox.
@@ -14,6 +14,8 @@
 -- 2022/08/29 Corretta gestione tipo Pocket senza fondo (sono lavorabili da entrambe le parti con fresatura).
 -- 2022/12/13 Aggiunta la funzione Is3EdgesApprox per riconoscere come 3 lati anche facce con lati aggiuntivi molto corti (<15 mm)
 -- 2022/12/14 Aggiunto l'accorciamento della lama in caso di facce vicine orientate verso il basso
+-- 2023/02/28 In lavorazioni con sega a catena per invertire lato mandrino ora Invert + Left invece di MCH_SCC.OPPOSITE.
+-- 2023/03/08 In lavorazione con fresa, se imposto Tool_ID non si controlla più possa lavorare di testa.
 
 -- Tabella per definizione modulo
 local WPF = {}
@@ -1714,23 +1716,22 @@ local function AddSawings( sSawing, vFace, Proc, nRawId, b3Raw)
          local dEal = vFace[i].Whisk - vFace[i].Len - dSawDiam / 2
          EgtSetMachiningParam( MCH_MP.STARTADDLEN, dSal)
          EgtSetMachiningParam( MCH_MP.ENDADDLEN, dEal)
-         -- percorso da non invertire
-         EgtSetMachiningParam( MCH_MP.INVERT, false)
          -- assegno utilizzo faccia
          EgtSetMachiningParam( MCH_MP.FACEUSE, MCH_MILL_FU.PARAL_DOWN)
          -- imposto angolo 3° asse rot
          EgtSetMachiningParam( MCH_MP.BLOCKEDAXIS, sRot3Ang)
          -- assegno affondamento
          EgtSetMachiningParam( MCH_MP.DEPTH, dDepth)
-         -- assegno lato di lavoro
+         -- assegno lato di lavoro e inversione direzione movimento
-         EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.RIGHT)
-         -- posizione braccio porta testa
          if vFace[i].Norm:getX() < 0.018 then 
-            EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.NONE)
+            EgtSetMachiningParam( MCH_MP.INVERT, false)
+            EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.RIGHT)
          else
-            EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.OPPOSITE)
+            EgtSetMachiningParam( MCH_MP.INVERT, true)
-            EgtSetMachiningParam( MCH_MP.OFFSR, dSawThick)
+            EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.LEFT)
          end
+         -- posizione braccio porta testa
+         EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.NONE)
          -- eseguo
          if not EgtApplyMachining( true, false) then
             local _, sErr = EgtGetLastMachMgrError()
@@ -1766,23 +1767,22 @@ local function AddSawings( sSawing, vFace, Proc, nRawId, b3Raw)
          end
          EgtSetMachiningParam( MCH_MP.STARTADDLEN, dSal)
          EgtSetMachiningParam( MCH_MP.ENDADDLEN, dEal)
-         -- percorso da non invertire
-         EgtSetMachiningParam( MCH_MP.INVERT, false)
          -- assegno utilizzo faccia
          EgtSetMachiningParam( MCH_MP.FACEUSE, MCH_MILL_FU.PARAL_DOWN)
          -- imposto angolo 3° asse rot
          EgtSetMachiningParam( MCH_MP.BLOCKEDAXIS, sRot3Ang)
          -- assegno affondamento
          EgtSetMachiningParam( MCH_MP.DEPTH, dDepth)
-         -- assegno lato di lavoro
+         -- assegno lato di lavoro e inversione direzione movimento
-         EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.RIGHT)
-         -- posizione braccio porta testa
          if vFace[i].Norm:getX() < 0.018 then
-            EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.NONE)
+            EgtSetMachiningParam( MCH_MP.INVERT, false)
+            EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.RIGHT)
          else
-            EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.OPPOSITE)
+            EgtSetMachiningParam( MCH_MP.INVERT, true)
-            EgtSetMachiningParam( MCH_MP.OFFSR, dSawThick)
+            EgtSetMachiningParam( MCH_MP.WORKSIDE, MCH_MILL_WS.LEFT)
          end
+         -- posizione braccio porta testa
+         EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.NONE)
          -- eseguo
          if not EgtApplyMachining( true, false) then
             local _, sErr = EgtGetLastMachMgrError()
@@ -2036,7 +2036,7 @@ local function MakeByCut( Proc, nRawId, b3Raw)
       end
    -- altrimenti provo con la sega a catena
    elseif sSawing then
-      local nCsOk, sCSErr, dThick = AddSawings( sSawing, vFace, Proc, nRawId, b3Raw)
+      local nCsOk, sCsErr, dThick = AddSawings( sSawing, vFace, Proc, nRawId, b3Raw)
       if nCsOk == 0 then return false, sCsErr end
       bDone = ( dThick ~= nil)
       -- se ci sono almeno due facce e lavorato almeno un angolo
@@ -2126,7 +2126,8 @@ local function MakeByMill( Proc, nRawId, b3Raw)
    local bToolInv = ( vtExtr:getZ() < -0.1)
    local nTool_ID = EgtGetInfo( Proc.Id, 'CNT_DATA', 'i')
    -- recupero la lavorazione
-   local sMilling = WM.FindMilling( 'FreeContour', nil, nil, nTool_ID, nil, nil, true)
+   local bTipFeed = EgtIf( nTool_ID, false, true)
+   local sMilling = WM.FindMilling( 'FreeContour', nil, nil, nTool_ID, nil, nil, bTipFeed)
    if not sMilling then
       local sErr = 'Error : milling not found in library'
       if nTool_ID then sErr = sErr .. ' (Tool_ID=' .. tostring( nTool_ID) .. ')' end

LuaLibs/WProcessLapJoint.lua

@@ -14,6 +14,7 @@
 -- 2022/11/15 DS Con lama massima inclinazione 60deg.
 -- 2022/12/01 Per 2 facce con angolo > 90° implementata lavorazione principale verticale. Se da sopra, aggiunta ripresa del lato inclinato.
 -- 2022/12/14 Nel caso di 2 facce piccola correzione al modo di ordinare le facce.
+-- 2023/03/09 Gestito caso riconoscimento errato Stype 3
 
 -- Tabella per definizione modulo
 local WPL = {}
@@ -142,6 +143,26 @@ function WPL.Classify( Proc, b3Raw)
                bAllowNegativeFace = true
             end
          end
+         
+         -- conto le adiacenze delle facce
+         local vAdj = {}
+         local nFacesWithMoreThanOneAdj = 0
+         for i = 1, Proc.Fct do
+            -- recupero le adiacenze del loop esterno
+            local vFacAdj = EgtSurfTmFacetAdjacencies( Proc.Id, i - 1)[1]
+            -- le conto
+            local nCount = 0
+            for j = 1, #vFacAdj do
+               if vFacAdj[j] >= 0 then
+                  nCount = nCount + 1
+               end
+            end
+            vAdj[i] = nCount
+            if nCount > 1 then
+               nFacesWithMoreThanOneAdj = nFacesWithMoreThanOneAdj + 1
+            end
+         end
+
          -- verifico se la faccia è lavorabile da sopra o di fianco
          if ( vtN:getZ() >= WD.NZ_MINA or ( dMinNz < -0.866 and Proc.Fct >= 3 and ( vtN:getZ() > - 0.01 or bAllowNegativeFace))) then
             Proc.Stype = 1
@@ -155,7 +176,7 @@ function WPL.Classify( Proc, b3Raw)
             Proc.Stype = 2
             return ( vtN2:getZ() >= WD.NZ_MINA or ( dMinNz < -0.866 and Proc.Fct >= 3 and vtN2:getZ() > - 0.01))
          -- se tre facce
-         elseif Proc.Fct == 3 then
+         elseif Proc.Fct == 3 and nFacesWithMoreThanOneAdj < 2 then
             -- verifico se U da sopra
             -- dati della faccia
             local nFac2 = EgtIf( nFacInd == 0, 1, 0)

LuaLibs/WProcessMark.lua

@@ -90,7 +90,7 @@ function WPMK.Make( Proc, nRawId, b3Raw)
    local b3Tab = EgtGetTableArea()
    local dMaxZTable = b3Tab:getMax():getZ()
    local dDeltaZ = dMinZRaw - dMaxZTable
-   local MIN_Z_OFFSET = 100
+   local MIN_Z_OFFSET = 99.9
    if vtExtr:getZ() < WD.NZ_MINA then
       if dDeltaZ < MIN_Z_OFFSET - GEO.EPS_SMALL or vtExtr:getZ() <= -0.1 then
          local sErr = 'Error : Mark from bottom impossible'

LuaLibs/WProcessMortise.lua

@@ -51,7 +51,7 @@ function WPM.Classify( Proc, b3Raw)
       local b3Tab = EgtGetTableArea()
       local dMaxZTable = b3Tab:getMax():getZ()
       local dDeltaZ = dMinZRaw - dMaxZTable
-      local MIN_Z_OFFSET = 100
+      local MIN_Z_OFFSET = 99.9
       return EgtIf( dDeltaZ < MIN_Z_OFFSET - GEO.EPS_SMALL, vtN:getZ() > WD.NZ_MINA, vtN:getZ() > -0.1)
    end
 end

LuaLibs/WallExec.lua

@@ -1,4 +1,4 @@
--- WallExec.lua by Egaltech s.r.l. 2022/05/12
+-- WallExec.lua by Egaltech s.r.l. 2023/03/06
 -- Libreria esecuzione lavorazioni per Pareti
 
 -- Tabella per definizione modulo
@@ -75,22 +75,22 @@ function WallExec.ProcessWalls( dRawL, dRawW, dRawH, vWall, bMachGroupOk, bNewPr
    end 
    if sOrigCorner == 'TL' then
       nCorner = MCH_CR.TL
-      OrigOnTab = Point3d( 0, b3Tab:getDimY() - abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
+      OrigOnTab = Point3d( 0 + abs( WD.DELTA_X or 0), b3Tab:getDimY() - abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
    elseif sOrigCorner == 'BL' then
       nCorner = MCH_CR.BL
-      OrigOnTab = Point3d( 0, abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
+      OrigOnTab = Point3d( 0 + abs( WD.DELTA_X or 0), abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
    elseif sOrigCorner == 'TR' then
       nCorner = MCH_CR.TR
-      OrigOnTab = Point3d( b3Tab:getDimX(), b3Tab:getDimY() - abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
+      OrigOnTab = Point3d( b3Tab:getDimX() - abs( WD.DELTA_X or 0), b3Tab:getDimY() - abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
    elseif sOrigCorner == 'BR' then
       nCorner = MCH_CR.BR
-      OrigOnTab = Point3d( b3Tab:getDimX(), abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
+      OrigOnTab = Point3d( b3Tab:getDimX() - abs( WD.DELTA_X or 0), abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
    elseif sOrigCorner == 'TM' then
       nCorner = MCH_CR.TR
-      OrigOnTab = Point3d( WD.MID_REF, b3Tab:getDimY() - abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
+      OrigOnTab = Point3d( WD.MID_REF - abs( WD.DELTA_X or 0), b3Tab:getDimY() - abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
    elseif sOrigCorner == 'BM' then
       nCorner = MCH_CR.BR
-      OrigOnTab = Point3d( WD.MID_REF, abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
+      OrigOnTab = Point3d( WD.MID_REF - abs( WD.DELTA_X or 0), abs( WD.DELTA_Y or 0), ( WD.DELTA_Z or 0))
    end
    -- Impostazione dell'attrezzaggio di default
    EgtImportSetup()

Version.lua

@@ -0,0 +1,4 @@
+-- Version.lua by Egalware s.r.l. 2023/03/08
+-- Gestione della versione di Wall
+
+VERSION = '2.5c4'