diff --git a/LuaLibs/PanelSaw.lua b/LuaLibs/PanelSaw.lua
index c50f993..287f7ce 100644
--- a/LuaLibs/PanelSaw.lua
+++ b/LuaLibs/PanelSaw.lua
@@ -32,6 +32,7 @@ local function GetPanelList()
       PanelList[i].dWidth = EgtGetInfo( idMachGroup, 'PANELWIDTH', 'd')
       PanelList[i].dThickness = EgtGetInfo( idMachGroup, 'PANELHEIGHT', 'd')
       PanelList[i].sMaterialFullName = EgtGetInfo( idMachGroup, 'MATERIAL', 's') or '0000-MATERIAL'
+      PanelList[i].sMaterialPlusThickness = PanelList[i].sMaterialFullName .. '_' .. tostring( string.format( '%.1f', PanelList[i].dThickness))
       local vMaterialInfo = EgtSplitString( PanelList[i].sMaterialFullName, '-')
       PanelList[i].idMaterial = vMaterialInfo[1]
       PanelList[i].idProd = EgtGetInfo( idMachGroup, 'PRODID', 'i')
@@ -39,10 +40,29 @@ local function GetPanelList()
       PanelList[i].nPdn = EgtGetInfo( idPart, 'PDN', 'i')
       PanelList[i].sName = EgtGetInfo( idPart, 'NAM', 's')
       PanelList[i].sDescription = PanelList[i].sName
+      local sGrainInfo = EgtGetInfo( idPart, "GRAINDIRECTION", 's')
+      PanelList[i].sGrainDirection = 'None'
+      if sGrainInfo then
+         local bUseGrain = ( string.sub( sGrainInfo, 7) == '1')
+         local sGrainDirection = string.sub( sGrainInfo, 1, 5)
+         if bUseGrain then
+            if sGrainDirection == "1,0,0" then
+               PanelList[i].sGrainDirection = 'Length'
+            elseif sGrainDirection == "0,1,0" then
+               PanelList[i].sGrainDirection = 'Width'
+            end
+         end
+      end
       -- in questa modalità ogni MachGroup è 1 pezzo, non esistono multipli
       -- TODO valutare se raggruppare i pannelli uguali per la cutting list
       PanelList[i].nQuantity = 1
-      -- TODO aggiungere labeling, edgebanding, graindirection, ...
+      -- TODO le informazioni di edgebanding devono arrivare dal btl
+      PanelList[i].sEdgeMaterialLeft = ''
+      PanelList[i].sEdgeMaterialRight = ''
+      PanelList[i].sEdgeMaterialTop = ''
+      PanelList[i].sEdgeMaterialBottom = ''
+      -- TODO il barcode deve arrivare dal btl
+      PanelList[i].sBarcode = ''
 
       idMachGroup = EgtGetNextMachGroup( idMachGroup)
    end
@@ -75,7 +95,7 @@ local function GetProjectInfo()
    local ProjectInfo = {}
    local idBtlInfo = EgtGetFirstNameInGroup( GDB_ID.ROOT, 'BtlInfo') or GDB_ID.NULL
 
-   ProjectInfo.sProjectName = EgtGetInfo( idBtlInfo, 'PROJECTNAME', 's') or ''
+   _, ProjectInfo.sProjectName = EgtSplitPath( EgtGetInfo( idBtlInfo, 'PROJECTNAME', 's') or '')
 
    return ProjectInfo
 end
@@ -122,7 +142,14 @@ local function BuildCuttingList_Cutty( PanelList, SheetList, ProjectInfo)
          ValuesPlaceholders = { '%.3f', '%.3f', '%d', '%d', '%d', '%d', '%d', '%-20s', '%d', '%d', '%d', '%d', '%-50s', '%d', '%d', '%d', '%d', '%d', '%d', '%.3f', '%d', '%d', '%-85d', '%.3f', '%.3f'},
       }
       for i = 1, #CurrentPanelList do
-         F2.ValuesList[i] = { CurrentPanelList[i].dLength, CurrentPanelList[i].dWidth, CurrentPanelList[i].nQuantity, 0, 0, 0, 0, CurrentPanelList[i].nPdn, 0, 0, 0, 0, CurrentPanelList[i].sDescription, 0, 0, 0, 0, 1, 0, 1500, 0, 0, 0, 0, 0}
+         local nGrain = 0
+         if PanelList[i].sGrainDirection == 'Length' then
+            nGrain = 1
+         elseif PanelList[i].sGrainDirection == 'Width' then
+            nGrain = 1
+            CurrentPanelList[i].dLength, CurrentPanelList[i].dWidth = CurrentPanelList[i].dWidth, CurrentPanelList[i].dLength
+         end
+         F2.ValuesList[i] = { CurrentPanelList[i].dLength, CurrentPanelList[i].dWidth, CurrentPanelList[i].nQuantity, 0, nGrain, 0, 0, CurrentPanelList[i].nPdn, 0, 0, 0, 0, CurrentPanelList[i].sDescription, 0, 0, 0, 0, 1, 0, 1500, 0, 0, 0, 0, 0}
       end
 
       local F7 = {
@@ -264,9 +291,54 @@ local function BuildCuttingList_Cutty( PanelList, SheetList, ProjectInfo)
 end
 
 
+local function BuildCuttingList_Homag( PanelList, ActualSheetList, ProjectInfo)
+
+   local LinesToWriteList = {}
+   local sExtension = 'csv'
+   local Lines = {}
+
+   local Header = {
+      Values = { 'Description', 'Quantity', 'Length', 'Width', 'Material', 'Grain', 'EdgeLeft', 'EdgeRight', 'EdgeTop', 'EdgeBottom', 'OrderNumber', 'BarCode'},
+      ValuesPlaceholders = { '%s', '%s', '%s', '%s', '%s', '%s', '%s', '%s', '%s', '%s', '%s', '%s'}
+   }
+
+   local Panels = {
+      ValuesList = {},
+      ValuesPlaceholders = { '%s', '%d', '%.1f', '%.1f', '%s', '%s', '%s', '%s', '%s', '%s', '%s', '%s' }
+   }
+   for i = 1, #PanelList do
+      local sGrain = PanelList[i].sGrainDirection
+      -- TODO questo dipenderà dalla lingua dell'esportazione; andrà fatto un tipo di esportazione specifica per ogni lingua (es: HOMAG_NL, HOMAG_ENG, ...)
+      if sGrain == 'None' then
+         sGrain = 'Geen'
+      elseif sGrain == 'Length' then
+         sGrain = 'Lengte'
+      elseif sGrain == 'Width' then
+         sGrain = 'Breedte'
+      end
+      Panels.ValuesList[i] = { PanelList[i].sDescription, PanelList[i].nQuantity, PanelList[i].dLength, PanelList[i].dWidth, PanelList[i].sMaterialPlusThickness, sGrain, PanelList[i].sEdgeMaterialLeft, PanelList[i].sEdgeMaterialRight, PanelList[i].sEdgeMaterialTop, PanelList[i].sEdgeMaterialBottom, ProjectInfo.sProjectName, PanelList[i].sBarcode}
+   end
+
+   -- Intestazione
+   table.insert( Lines, string.format( table.concat( Header.ValuesPlaceholders, ','), table.unpack( Header.Values)))
+
+   -- Lista Pannelli
+   for i = 1, #Panels.ValuesList do
+      local Values = Panels.ValuesList[i]
+      local Placeholders = Panels.ValuesPlaceholders
+      table.insert( Lines, string.format( table.concat( Placeholders, ','), table.unpack( Values)))
+   end
+   
+   LinesToWriteList[1] = Lines
+   
+   return LinesToWriteList, sExtension
+end
+
+
 local function BuildCuttingList( PanelList, sOutputType)
 
    local LinesToWriteList = {}
+   local sExtension = ''
    local SheetList = GetSheetList()
    local ProjectInfo = GetProjectInfo()
    local dRequiredThickness = PanelList[1].dThickness
@@ -292,10 +364,11 @@ local function BuildCuttingList( PanelList, sOutputType)
    -- Homag
    elseif sOutputType == 'HOMAG' then
 
+      LinesToWriteList, sExtension = BuildCuttingList_Homag( PanelList, ActualSheetList, ProjectInfo)
 
    end
 
-   return LinesToWriteList
+   return LinesToWriteList, sExtension
 end
 
 
@@ -335,12 +408,14 @@ function PanelSaw.GenerateCuttingList( sOutputType)
 
       if sOutputType then
          -- costruzione lista istruzioni
-         local LinesToWriteList = BuildCuttingList( PanelListSingleMaterial, sOutputType)
+         local LinesToWriteList, sExtension = BuildCuttingList( PanelListSingleMaterial, sOutputType)
          
          for i = 1, #LinesToWriteList do
             -- scrittura file
             local sFilename = sCurrentNgePath .. 'CutList-' .. sCurrentNgeName .. '-' .. key .. '-' .. i .. sOutputType
             sFilename = sFilename:gsub( '%.', '_')
+            -- aggiunta eventuale estensione
+            sFilename = sFilename .. '.' .. sExtension
             local hFile, nFileErr = io.open( sFilename, 'w')
             if not hFile then
                EgtOutLog( 'Error creating cutting list : IO error ' .. tostring( nFileErr))