- in headcut e split varie correzioni a tagli aggiuntivi per trave larga; rimangono da implementare per BigSection

- test annotations @param, #return in funzione GetFaceHvRefDim del BeamLib

LuaLibs/ProcessHeadCut.lua

@@ -151,6 +151,31 @@ local function MakeChamfer( nOriId, Proc, nPhase, nRawId, nPartId, dOvmHead)
    return true, nil
 end
 
+---------------------------------------------------------------------
+-- tagli verticali aggiuntivi
+local function AddVerticalPreCuts( Proc, sCutting, dCutXOffset, b3Raw )
+   local _, dimH = BL.GetFaceHvRefDim( Proc.Id, 0, b3Raw)
+   local nVerticalCuts = ceil( dimH / ( 2 * BD.MAX_DIM_DICE)) - 1
+   local dVerticalSliceHeight = dimH / ( nVerticalCuts + 1)
+   -- recupero il diametro dell'utensile
+   local dSawDiam = 400
+   if EgtMdbSetCurrMachining( sCutting) then
+      local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
+      if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuid) or '') then
+         dSawDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or dSawDiam
+      end
+   end
+   local bOk, sErr
+   -- tagli orizzontali
+   for j = nVerticalCuts, 1, -1 do
+      local nFaceUse = MCH_MILL_FU.PARAL_FRONT
+      local dVerticalCutOffset = dVerticalSliceHeight * -j
+      bOk, sErr = Fbs.MakeOne( Proc.Id, 0, sCutting, dSawDiam, nFaceUse, nil, -0.1 -dCutXOffset, BD.CUT_SIC, dVerticalCutOffset, 0, 0, '', b3Raw)
+      if not bOk then return bOk, sErr end
+   end
+   return bOk, sErr
+end
+
 ---------------------------------------------------------------------
 -- Applicazione della lavorazione
 function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut)
@@ -162,6 +187,8 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
       local bOkc, sErrC = MakeChamfer( nOriId, Proc, nPhase, nRawId, nPartId, dOvmHead)
       if not bOkc then return bOkc, sErrC end
    end
+   -- eventuali informazioni sul tipo di finitura
+   local nQ05 = EgtGetInfo( nOriId or GDB_ID.NULL, 'Q05', 'i') or 0
    -- recupero la lavorazione
    local sCutting = ML.FindCutting( 'HeadSide')
    if not sCutting then
@@ -212,12 +239,13 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
    -- determino se più tagli con offset
    local nCuts = max( ceil( dOvmHead / (( BD.MAX_LEN_SCRAP_START or BD.MAX_LEN_SCRAP) + 0.5)), 1)
    local dOffsL = dOvmHead / nCuts
+   local _, dimH, dimV = BL.GetFaceHvRefDim( Proc.Id, 0, b3Raw)
+   local dMinOvmHeadForAddeddCuts = 10.123
    -- se taglio per sezioni alte e larghe
    if bBigSectionCut then
       if dOvmHead > 0 then
-         local nQ05 = EgtGetInfo( nOriId or GDB_ID.NULL, 'Q05', 'i') or 0
          -- se finitura con lama
-         if nQ05 == 1 or nQ05 == 0 then
+         if nQ05 < 2 then
             local dSawThickCheck = dSawThick
             if dSawThick2 > 0 and bDoubleHorizCut then
                dSawThickCheck = min( dSawThick, dSawThick2)
@@ -228,6 +256,11 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
             else
                dMaxElev = Proc.Box:getMax():getX() - b3Raw:getMin():getX()
             end
+            -- se trave larga effettuo tagli verticali aggiuntivi
+            if ( dimH > BD.MAX_LEN_DICE) and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL) then
+               local bOk, sErr = AddVerticalPreCuts( Proc, sCutting, 0, b3Raw)
+               if not bOk then return bOk, sErr end
+            end
             -- controllo se è necessario un taglio con dicing o si deve proseguire ai casi standard
             if dMaxElev > dSawThickCheck then
                local bOk, sErr = Cut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, nil, false, true, nil, nil, dCurrOvmT)
@@ -286,9 +319,7 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
       end
 
       -- per travi alte faccio dei tagli orizzontali aggiuntivi
-      local _, _, dimV = BL.GetFaceHvRefDim( Proc.Id, 0, b3Raw)
-      local dMinOvmHeadForHorizontalCuts = 10.123
-      local bAreHorizontalCutsNeeded = ( dimV > BD.MAX_LEN_DICE) and not bBigSectionCut and ( dOvmHead > dMinOvmHeadForHorizontalCuts - 10 * GEO.EPS_SMALL)
+      local bAreHorizontalCutsNeeded = ( dimV > BD.MAX_LEN_DICE) and not bBigSectionCut and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL)
       if bAreHorizontalCutsNeeded then
          local nHorizontalCuts = ceil( dimV / BD.MAX_DIM_DICE) - 1
          local dHorizontalSliceHeight = dimV / ( nHorizontalCuts + 1)
@@ -328,6 +359,11 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
       -- eseguo i tagli necessari
       for i = nCuts, 1, -1 do
          local dCutOffset = ( i - 1) * dOffsL
+         -- se trave larga effettuo tagli verticali aggiuntivi
+         if ( dimH > BD.MAX_LEN_DICE) and ( dOvmHead > dMinOvmHeadForAddeddCuts - 10 * GEO.EPS_SMALL) then
+            local bOk, sErr = AddVerticalPreCuts( Proc, sCutting, dCutOffset, b3Raw)
+            if not bOk then return bOk, sErr end
+         end
          local bOk, sErr = Fbs.MakeOne( Proc.Id, 0, sCutting, dSawDiam, nOrthoOpposite, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, dAccEnd, '', b3Raw)
          if not bOk then return false, sErr end
       end