DataBeam :

- migliorato orientamento braccio FAST su fori perpendicolari asse trave - migliorato orientamento braccio FAST su svuotature con normale perpendicolare ad asse trave per LapJoint.
2020-11-04 07:34:14 +00:00
parent aa0e483456
commit 1adb136219
3 changed files with 42 additions and 29 deletions
@@ -1,4 +1,4 @@
-- ProcessLapJoint.lua by Egaltech s.r.l. 2020/10/23
+-- ProcessLapJoint.lua by Egaltech s.r.l. 2020/11/03
 -- Gestione calcolo mezzo-legno per Travi
 -- 2019/10/08 Agg. gestione OpenPocket.

@@ -619,7 +619,7 @@ local function MakeOneFaceByMill( Proc, nPhase, nRawId, nPartId)
   -- recupero la lavorazione
   local sMilling = ML.FindMilling( 'BirdsMouth')
   if not sMilling then
-      local sErr = 'Error : milling not found in library'
+      local sErr = 'Error : BirdsMouth not found in library'
      EgtOutLog( sErr)
      return false, sErr
   end
@@ -695,7 +695,7 @@ local function MakeTwoFacesByMill( Proc, nPhase, nRawId, nPartId)
   -- recupero la lavorazione
   local dTDiam = 0
   if not sMilling then
-      local sErr = 'Error : milling not found in library'
+      local sErr = 'Error : LongSmallCut & BirdsMouth not found in library'
      EgtOutLog( sErr)
      return false, sErr
   else
@@ -932,7 +932,7 @@ local function MakeByMill( Proc, nPhase, nRawId, nPartId, nFacInd, rfFac, dH, dV
   else 
      sMilling = ML.FindMilling( 'LongSmallCut')
      if not sMilling then
-         sErr = 'Error : milling not found in library'
+         sErr = 'Error : LongSmallCut not found in library'
         EgtOutLog( sErr)
         return false, sErr
      end
@@ -1275,7 +1275,7 @@ local function MakeCleanCorner( Proc, nPhase, nRawId, nPartId, b3Raw, nFacInd, n
      -- recupero la lavorazione non calcolando l'elevazione
      sMilling = ML.FindMilling( 'CleanCorner', (dDiam*0.5))
      if not sMilling then
-         local sErr = 'Error : clean corner milling/tool not found in library'
+         local sErr = 'Error : CleanCorner not found in library'
         EgtOutLog( sErr)
         return false, sErr
      end
@@ -1765,7 +1765,7 @@ local function MakeChamfer( Proc, b3FacesUsed, nAddGrpId, vtOrtho, b3Solid, nSur
   -- recupero la lavorazione
   local sMilling = ML.FindMilling( 'Mark')
   if not sMilling then
-      local sErr = 'Error : chamfer not found in library'
+      local sErr = 'Error : Mark not found in library'
      EgtOutLog( sErr)
      return -1, sErr
   end
@@ -1985,7 +1985,7 @@ local function MakeByChainOrSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
      -- Recupero la lavorazione di lama
      local sCutting = ML.FindCutting( 'HeadSide')
      if not sCutting then
-         local sErr = 'Error : cutting not found in library'
+         local sErr = 'Error : HeadSide (cutting) not found in library'
         EgtOutLog( sErr)
         return false, sErr, 'MNF'
      end
@@ -2030,7 +2030,7 @@ local function MakeByChainOrSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
      -- Recupero la lavorazione
      local sSawing = ML.FindSawing( 'Sawing')
      if not sSawing then
-         local sErr = 'Error : chainsawing not found in library'
+         local sErr = 'Error : Sawing not found in library'
         EgtOutLog( sErr)
         return false, sErr, 'MNF'
      end
@@ -2210,7 +2210,7 @@ local function MakeAntiSplintBySaw( Proc, nFacet, vtN, b3Raw)
   -- Recupero la lavorazione di lama
   local sCutting = ML.FindCutting( 'HeadSide')
   if not sCutting then
-      local sErr = 'Error : cutting not found in library'
+      local sErr = 'Error : HeadSide (cutting) not found in library'
      EgtOutLog( sErr)
      return false, sErr
   end
@@ -2291,7 +2291,7 @@ local function MakePocket( Proc, nPartId, ptPs, tvtN, nFaceRef, sMchFind, nUseRo
      sPocketing = ML.FindPocketing( sMchFind, dFaceDiamTool, dElev + dCollSic)
   end
   if not sPocketing then
-      local sErr = 'Error : pocketing not found in library'
+      local sErr = 'Error : '..sMchFind..' not found in library'
      EgtOutLog( sErr)
      return false, sErr
   end
@@ -2322,19 +2322,20 @@ local function MakePocket( Proc, nPartId, ptPs, tvtN, nFaceRef, sMchFind, nUseRo
   -- imposto uso faccia
   EgtSetMachiningParam( MCH_MP.FACEUSE, MCH_MILL_FU.ORTHO_CONT)
   -- imposto posizione braccio porta testa
+   local nSCC = MCH_SCC.NONE
   if not BD.C_SIMM then
-      if tvtN[2]:getY() < GEO.EPS_SMALL then
-         EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.ADIR_YM)
-      else
-         EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.ADIR_YP)
+      nSCC = MCH_SCC.ADIR_YM 
+      if AreSameVectorApprox( tvtN[2], Z_AX()) then
+         nSCC = MCH_SCC.ADIR_YM
+      elseif abs( tvtN[2]:getX()) < 0.1 then
+         nSCC = EgtIf( BL.IsEndOrEnd2Phase( EgtGetCurrPhase()), MCH_SCC.ADIR_XM, MCH_SCC.ADIR_XP)
+      elseif tvtN[2]:getY() > 0.1 then
+         nSCC = MCH_SCC.ADIR_YP
      end
   else
-      if abs( tvtN[2]:getZ()) < 0.866 then
-         EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.ADIR_ZP)
-      else
-         EgtSetMachiningParam( MCH_MP.SCC, MCH_SCC.ADIR_YP)
-      end
+      nSCC = MCH_SCC.NONE
   end
+   EgtSetMachiningParam( MCH_MP.SCC, nSCC)
   -- se tasca aperta e non lavorata col truciolatore, imposto opportuno attacco
   if sMchFind == 'OpenPocket' and nUseRoughTool == 0 then
      EgtSetMachiningParam( MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALIN)
@@ -2393,7 +2394,7 @@ local function MachineByMill( Proc, nPhase, nRawId, nPartId, b3Solid, tvtN, nBas
               -- recupero la lavorazione
               local sMilling = ML.FindMilling( 'Long2Cut', dElev, sTuuidPk)
               if not sMilling then
-                  local sErr = 'Error : milling not found in library'
+                  local sErr = 'Error : Long2Cut not found in library'
                  EgtOutLog( sErr)
                  return false, sErr
               end
@@ -2469,7 +2470,7 @@ local function MachineByMill( Proc, nPhase, nRawId, nPartId, b3Solid, tvtN, nBas
            sMilling = ML.FindMilling( 'LongSmallCut', nil, sTuuidPk)
         end
         if not sMilling then
-            local sErr = 'Error : milling not found in library'
+            local sErr = 'Error : Long2Cut & LongSmallCut not found in library'
            EgtOutLog( sErr)
            return false, sErr
         end
@@ -3144,7 +3145,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
               -- Recupero la lavorazione di fresa
               local sMilling = ML.FindMilling( 'LongSmallCut')
               if not sMilling then
-                  local sErr = 'Error : milling not found in library'
+                  local sErr = 'Error : LongSmallCut not found in library'
                  EgtOutLog( sErr)
                  return false, sErr
               end
@@ -3173,7 +3174,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                  vtN, vtN2 = vtN2, vtN
                  sPocketing = ML.FindPocketing( sMchFind, dDiam2, dFacElev2 + dCollSic2)
                  if not sPocketing then
-                     local sErr = 'Error : pocketing not found in library'
+                     local sErr = 'Error : '..sMchFind..' not found in library'
                     EgtOutLog( sErr)
                     return false, sErr
                  end
@@ -3393,7 +3394,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                                 if sStat == 'MNF' then
                                    sPocketing = ML.FindPocketing( sMchFind, dDiam)
                                    if not sPocketing then
-                                       local sErr = 'Error : pocketing not found in library'
+                                       local sErr = 'Error : '..sMchFind..' not found in library'
                                       EgtOutLog( sErr)
                                       return false, sErr
                                    end
@@ -3407,7 +3408,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                           else
                              sPocketing = ML.FindPocketing( sMchFind, dDiam)
                              if not sPocketing then
-                                 local sErr = 'Error : pocketing not found in library'
+                                 local sErr = 'Error : '..sMchFind..' not found in library'
                                 EgtOutLog( sErr)
                                 return false, sErr
                              end
@@ -3456,7 +3457,7 @@ local function MakeMoreFaces( Proc, nPhase, nRawId, nPartId, dOvmHead, bSinglePa
                        if not bOk and sStat == 'MNF' then
                           sPocketing = ML.FindPocketing( sMchFind, dDiam)
                           if not sPocketing then
-                              local sErr2 = 'Error : pocketing not found in library'
+                              local sErr2 = 'Error : '..sMchFind..' not found in library'
                              EgtOutLog( sErr2)
                              return false, sErr2
                           end