diff --git a/Common_FAST.NUM.mlpe b/Common_FAST.NUM.mlpe
index 04948ea..ba68031 100644
--- a/Common_FAST.NUM.mlpe
+++ b/Common_FAST.NUM.mlpe
@@ -635,6 +635,12 @@ function OnRapid()
          bGoToHome = true
       end
 
+      -- ricavo i dati per la lavorazione
+      local sEE = ' EE' .. EgtIf( bZmax, '3', '4')
+      local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
+      local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
+      local sES = ' ES'..EgtNumToString( EMT.S, 0)
+
       -- primo posizionamento
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
@@ -656,12 +662,6 @@ function OnRapid()
          EmtOutput( '( *** ' .. sOut .. ' *** )')
       end
 
-      -- ricavo i dati per la lavorazione
-      local sEE = ' EE' .. EgtIf( bZmax, '3', '4')
-      local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
-      local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
-      local sES = ' ES'..EgtNumToString( EMT.S, 0)
-
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
       if not EMT.LOAD and ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and
          ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350) or bGoToHome) and EMT.FLAG2 == 1 then
diff --git a/Common_FAST.NUM_PLUS.mlpe b/Common_FAST.NUM_PLUS.mlpe
index 9006802..6074687 100644
--- a/Common_FAST.NUM_PLUS.mlpe
+++ b/Common_FAST.NUM_PLUS.mlpe
@@ -684,27 +684,6 @@ function OnRapid()
          bGoToHome = true
       end
 
-      -- primo posizionamento
-      local MyZHome = EgtGetAxisHomePos( 'Z')
-      local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
-      -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and EMT.FLAG2 == 1 then
-         local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
-                                       ' B' .. EmtLenToString( EMT.R2pp, 3) .. ' C' .. EmtLenToString( EMT.R1pp, 3) .. 
-                                       ' EE' .. EgtIf( bZmax, '3', '4') .. EMT.PREVsEL .. EMT.PREVsER .. EMT.PREVsET .. EMT.PREVsES
-         EmtOutput( sOutPreMove)
-         sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
-                                       ' B' .. EgtNumToString( 0, 3) .. ' C' .. EgtNumToString( EMT.R1, 3) .. sEE .. sEL .. sER .. sET .. sES
-         EmtOutput( sOutPreMove)
-         EmtOutput( 'G101 ET1001')
-         EmtOutput( 'G101 ET2001')
-      end
-
-      if not EMT.LOAD then
-         local sOut = string.gsub( string.gsub( EMT.MCHNAME..'/'..EMT.TOOL, '%(', '-'), '%)', '-')
-         EmtOutput( '( *** ' .. sOut .. ' *** )')
-      end
-
       -- ricavo i dati per la lavorazione
       local sEE = ' EE' .. EgtIf( bZmax, '3', '4')
       
@@ -734,6 +713,27 @@ function OnRapid()
 
       local sES = ' ES'..EgtNumToString( EMT.S, 0)
 
+      -- primo posizionamento
+      local MyZHome = EgtGetAxisHomePos( 'Z')
+      local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
+      -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
+      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and EMT.FLAG2 == 1 then
+         local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EmtLenToString( EMT.R2pp, 3) .. ' C' .. EmtLenToString( EMT.R1pp, 3) .. 
+                                       ' EE' .. EgtIf( bZmax, '3', '4') .. EMT.PREVsEL .. EMT.PREVsER .. EMT.PREVsET .. EMT.PREVsES
+         EmtOutput( sOutPreMove)
+         sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( 0, 3) .. ' C' .. EgtNumToString( EMT.R1, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOutPreMove)
+         EmtOutput( 'G101 ET1001')
+         EmtOutput( 'G101 ET2001')
+      end
+
+      if not EMT.LOAD then
+         local sOut = string.gsub( string.gsub( EMT.MCHNAME..'/'..EMT.TOOL, '%(', '-'), '%)', '-')
+         EmtOutput( '( *** ' .. sOut .. ' *** )')
+      end
+
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
       if not EMT.LOAD and ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and 
          ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350) or bGoToHome) and EMT.FLAG2 == 1 then
diff --git a/UpdateLog.txt b/UpdateLog.txt
index bef361d..ef8bda6 100644
--- a/UpdateLog.txt
+++ b/UpdateLog.txt
@@ -1,5 +1,8 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.7k1 (10/11/2025)
+- (GEN) Corretto set variabili info utensile prima del movimento in home in caso di pezzi alti per NUM/NUM_PLUS.
+
 Versione 2.7j2 (08/10/2025)
 - (SIM-GEN) Quando si scarica motosega, si raddrizza prima l'asse B e poi si muove il C. Ora sempre e non solo se pezzo alto.
 
diff --git a/Version.lua b/Version.lua
index e0a36b2..34dea05 100644
--- a/Version.lua
+++ b/Version.lua
@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.7--',                 -- versione script
+   VERSION = '2.7k1',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }