-- =============================================
-- Author:		Steamware
-- Mod. date: 2014.10.21
-- Description:	aggiorna le tabelle QuoteList con i dati selezionati dalla TabProdSc
-- =============================================
CREATE PROCEDURE [dbo].[stp_QL_update]
(
	@QuoteType	CHAR(1) = 'Q',
	@CodQuote	BIGINT	= 0,
	@QuoteRev	INT		= 0
) 
AS
BEGIN

	SET NOCOUNT ON;

	-- dichiaro valori da recuperare
	DECLARE	@strTemp		NVARCHAR(50) = '' --stringa temporanea x variabili "locali"	
		  , @valid			BIT -- bit validità generico totale
		  , @validStep      BIT -- bit validità generico singolo step
		  , @errorScore		INT -- punteggio errori (1 per errore o anche punti diversi x "Peso", da valutare
		  , @CodDiesGroup	NVARCHAR(50) = ''
		  , @CodPlant		NVARCHAR(50) = ''
		  , @CodPlantCMIL	NVARCHAR(50) 
		  , @CodPlantFix	NVARCHAR(50) = ''
		  , @HoleNum		INT

	-- ITEM
	DECLARE @CodItem		NVARCHAR(50) = '' -- cod item
		  , @ItemDescr		NVARCHAR(50) = '' -- descrizione item
		  , @CodifProfilo   NVARCHAR(50) = '' -- Cod. Profilo
		  , @ClasseMerc     NVARCHAR(50) = '' 
		  , @CodClientAssoc NVARCHAR(50) = '' 
		  , @KeyAM			NVARCHAR(50) = ''
		  , @KeyAMI			NVARCHAR(50) = ''
		  , @KeyAMIL		NVARCHAR(50) = ''
		  , @NumSMED		INT = 0 -- numero cambi
		  , @KgTeo			DECIMAL(18, 6) = 0 -- kg totali
		  , @RawMat			NVARCHAR(50)
		  ,	@ProdTeo		DECIMAL(18,6) = 0
		  ,	@ProdTeo_sim	DECIMAL(18,6) = 0   
		  ,	@ScTec			DECIMAL(18,6)
		  ,	@BatchQty		INT
		  ,	@MAC_SC			DECIMAL(18,6)       -- Messa a cento scarto cesoia
		  ,	@MAC_ST			DECIMAL(18,6)       -- Messa a cento scarto tecnico
		  ,	@MAC_IN			DECIMAL(18,6)       -- Messa a cento difettosità all'incestatura
		  ,	@MAC_IM			DECIMAL(18,6)       -- Messa a cento difettosità all'imballo
		  ,	@MAC_SC_sim 	DECIMAL(18,6) = 0   -- Messa a cento scarto cesoia - SIMULAZIONE
		  ,	@MAC_ST_sim 	DECIMAL(18,6) = 0   -- Messa a cento scarto tecnico - SIMULAZIONE
		  ,	@MAC_IN_sim 	DECIMAL(18,6) = 0   -- Messa a cento difettosità all'incestatura - SIMULAZIONE
		  ,	@MAC_IM_sim 	DECIMAL(18,6) = 0   -- Messa a cento difettosità all'imballo - SIMULAZIONE
		  ,	@FCR_sim		DECIMAL(18,6) = 0   -- Messa a cento complessiva - SIMULAZIONE
		  ,	@SSR			DECIMAL(9,6)        -- percentuale vendita rottame
		  ,	@DiesPrice		DECIMAL(9,3)        -- prezzo matrice
          , @NumDiesExaust  INT = 0             -- numero matrici rottamate
		  ,	@DiesEOLife		DECIMAL(9,2)        -- durata matrice CLASSE MATRICE
		  ,	@DiesExpLife	DECIMAL(9,2)        -- durata matrice ARTICOLO
		  ,	@DiesPriceLife	DECIMAL(18,6)       -- Price/Life matrice
		  ,	@DiesByClass	BIT = 0             -- definisce se i dati della matrice siano calcolati puntualmente (0) o per classe (1)
		  ,	@OCF01			DECIMAL(18,6) = 0 -- altri costi di fase 01
		  ,	@VCF01			DECIMAL(18,6) = 0 -- costi variabili di fase 01
		  ,	@VCF04			DECIMAL(18,6) = 0 -- costi variabili di fase 04
		  ,	@SellCostF01	DECIMAL(18,6) = 0 -- costo vendita fase 01
		  ,	@SellCostF04	DECIMAL(18,6) = 0 -- costo vendita fase 04
		  ,	@RefCostF01		DECIMAL(18,6) = 0 -- costo rifusione fase 01 
		  ,	@RefCostF04		DECIMAL(18,6) = 0 -- costo rifusione fase 04
	-- IMBALLO
	DECLARE	@CodPackag		NVARCHAR(50) = '0'  -- codice dell'imballo
		  , @CodClient		NVARCHAR(50) = ''   -- codice cliente
		  , @NumImb			DECIMAL(9,6) = 0    -- num imballatori
		  , @PkgDesc		NVARCHAR(50) = ''   -- descrizione imballo
		  , @PRMWeight		DECIMAL(9,4) = 0    -- peso dell'imballo
		  , @PWeight		DECIMAL(9,4) = 0    -- peso del pacco
		  , @PTare			DECIMAL(9,4) = 0    -- media delal tara di imballo dichiarata
		  , @PCost			DECIMAL(9,6) = 0    -- costo unitario dell'imballo (al kg) 
		  , @PTareStRatio	DECIMAL(9,4) = 0    -- coefficiente di recupero tara/prodotto
		  , @PTotQta        DECIMAL(18,3) = 0   -- Qta Kg Tot Imballati
		  , @PDurata        DECIMAL(18,6) = 0   -- Tempo d'imballaggio
		  , @PLiv           NVARCHAR(50)  = ''  -- Livello Search dati Imballo     
		  , @PLivDett       NVARCHAR(50)  = ''  -- Key Livello Search Dati Imballo
		  ,	@ProdTeoImb		DECIMAL(18,6) = 0   -- produttività SIMULATA imballo
		  ,	@ProdTeoImb_sim	DECIMAL(18,6) = 0   -- produttività SIMULATA imballo
	-- TRASPORTI
	DECLARE	@TranspZone		NVARCHAR(50) = '' -- codice ZONA
		  ,	@TranspCost		DECIMAL(9,6) = 0  -- costo di trasporto
		  ,	@HasTC			INT

	-- PROVVIGIONI
	DECLARE	@Provvig		DECIMAL(9,6) -- provvigione agente
	
	-- default: validità è true!
	SET		@valid = 1
	-- default: error score è nullo
	SET		@errorScore = 0

	-- =================================================
	--   CREAZIONE TEMP TABLE
	-- =================================================

	-- elimino e ricreo #QuoteParam temp table... NON Serve nella stored
	--IF OBJECT_ID('tempdb..#QuoteParam') IS NOT NULL
	--	DROP TABLE #QuoteParam

	CREATE TABLE #Quoteparam
	(
				 Quotetype  CHAR( 1 )           COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
				 Codquote   BIGINT              NOT NULL,
				 Quoterev   INT                 NOT NULL,
				 Nump       INT IDENTITY( 1,1 ) NOT NULL,
				 Processnum NVARCHAR( 50 )      COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
				 Descr      NVARCHAR( 50 )      COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
				 Parameter  NVARCHAR( 100 )     COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT(''),
	--PRIMARY KEY
	--		(	QuoteType ASC, CodQuote ASC, QuoteRev ASC ) WITH  (PAD_INDEX  = ON, FILLFACTOR = 99 )
	);

	-- oppure creo l'indice successivamente
	--CREATE CLUSTERED INDEX #ix_Quoteparam ON #Quoteparam (QuoteType ASC, CodQuote ASC, QuoteRev ASC)
	--WITH (PAD_INDEX  = ON, FILLFACTOR = 100)

	--CREATE STATISTICS [#ix_QuoteType_CodQuote] ON #Quoteparam ([QuoteType], [CodQuote], [QuoteRev])

	-- elimino e ricreo ##QuoteWorkInt temp table...
	--IF OBJECT_ID('tempdb..#QuoteWorkInt') IS NOT NULL 	DROP TABLE #QuoteWorkInt

   CREATE TABLE #QuoteWorkInt
	(
		QuoteType     CHAR(1)   COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
		CodQuote      BIGINT    NOT NULL,
		QuoteRev      INT       NOT NULL,
		NumWI         INT IDENTITY(1,1) NOT NULL,
		ProcessNum    NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
		CodPlant      NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
		Class01       NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class02       NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class03       NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class04       NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class05       NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		NetProd       DECIMAL(9, 3) NOT NULL DEFAULT ((0)),
		WSR           DECIMAL(9, 8) NOT NULL DEFAULT ((0)),
		MSR           DECIMAL(9, 8) NOT NULL DEFAULT ((0)),
		DSR           DECIMAL(9, 8) NOT NULL DEFAULT ((0)),
		FC4UG         DECIMAL(9, 6) NOT NULL DEFAULT ((0)),
		VC4UG         DECIMAL(9, 6) NOT NULL DEFAULT ((0)),
		OH4UG         DECIMAL(9, 6) NOT NULL DEFAULT ((0)),
		SC4UG         DECIMAL(9, 6) NOT NULL DEFAULT ((0)),
		-- campi calcolati
		WYR   AS ((1)-WSR),
		MYR   AS ((1)-MSR),
		DYR   AS ((1)-DSR),
		WCR   AS ( CASE WHEN ((1)-WSR)=0 THEN 1 ELSE (1)/((1)-WSR) END ),
		MCR   AS ( CASE WHEN ((1)-MSR)=0 THEN 1 ELSE (1)/((1)-MSR) END ),
		DCR   AS ( CASE WHEN ((1)-DSR)=0 THEN 1 ELSE (1)/((1)-DSR) END ),
		valid BIT NOT NULL DEFAULT((1)),
	)

-- elimino e ricreo #QuoteOC temp table...
--IF OBJECT_ID('tempdb..#QuoteOC') IS NOT NULL DROP TABLE #QuoteOC

	CREATE TABLE #QuoteOC 
	(
		QuoteType   CHAR(1)             COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
		CodQuote    BIGINT              NOT NULL,
		QuoteRev    INT                 NOT NULL,
		NumEx       INT IDENTITY(1,1)   NOT NULL,
		ProcessNum  NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		CodPlant    NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class01     NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class02     NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class03     NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class04     NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		Class05     NVARCHAR(50)        COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL DEFAULT (''),
		TotQty      DECIMAL(18, 6)      NOT NULL DEFAULT ((1)),
		TotCost     DECIMAL(18, 6)      NOT NULL DEFAULT ((0)),
		Quota       DECIMAL(18, 6)      NOT NULL DEFAULT ((1)),
		C4UG        AS ( CASE WHEN TotQty= 0 THEN 0 ELSE (TotCost*Quota) / TotQty END ),
		valid       BIT NOT NULL DEFAULT ((1))
	)

	-- ===================================
	--  INIZIO TRANSAZIONE
	-- ===================================
	SET XACT_ABORT ON;
	BEGIN TRAN

        
		---------------------------------------
		-- salvataggio parametri iniziale
		---------------------------------------
        DECLARE @NetProd01_sim  DECIMAL(9,3) = 0 -- prod simulazione fase 01
        DECLARE @NetProd04_sim  DECIMAL(9,3) = 0 -- prod simulazione fase 04
        
        -- cerco la prod netta fase 1 di simulazione...
        SELECT  @NetProd01_sim = CAST(Parameter AS DECIMAL(9,3))
        FROM    dbo.QuoteParam
        WHERE   descr = 'NetProd01_sim'
            AND QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

        -- cerco la prod netta fase 1 di simulazione...
        SELECT  @NetProd04_sim = CAST(Parameter AS DECIMAL(9,3))
        FROM    dbo.QuoteParam
        WHERE   descr = 'NetProd04_sim'
            AND QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

        --SELECT @NetProd01_sim as NetProd01_sim, @NetProd04_sim as NetProd04_sim
                
		---------------------------------------
		-- svuotamento iniziale
		---------------------------------------
	
		-- elimino quote PARAMETRI!
		DELETE FROM	dbo.QuoteParam
		WHERE	QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

		-- elimino lavorazioni ESTERNE!
		DELETE FROM	dbo.QuoteWorkExt
		WHERE	QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

		-- elimino lavorazioni INTERNE
		DELETE FROM	dbo.QuoteWorkInt
		WHERE	QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

		-- elimino OtherCosts
		DELETE FROM	dbo.QuoteOC
		WHERE	QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

		-- se ci sono eccezioni nella tab dell'anagrafico articoli imposto il codPlant desiderato
		SET	@CodPlantFix = ISNULL ( ( SELECT id.CodPlant FROM dbo.ItemDet id 
									  INNER JOIN dbo.QuoteList ql ON id.CodItem = ql.CodItem
									  WHERE ql.QuoteType   = @QuoteType
										AND ql.CodQuote    = @CodQuote
										AND ql.QuoteRev    = @QuoteRev ), '' )

		-- recupero da dati dell'offerta il valore del cliente
		SELECT	@CodClient		= CodClient
		FROM	dbo.QuoteList
		WHERE	QuoteType = @QuoteType AND CodQuote = @CodQuote AND QuoteRev = @QuoteRev
		
		IF (@QuoteType IN ('Q', 'R','C' ) )    -- Quotation, Reddittivity, Cost List
			BEGIN
				-- recupero dati!!
				SELECT	TOP 1 @CodItem	        = ql.CodItem
							, @CodDiesGroup     = tps.CodDiesGroup
							, @CodPlant         = CASE WHEN @CodPlantFix <> '' THEN @CodPlantFix ELSE tps.CodPlant END
							, @HoleNum          = tps.HoleNum
							, @KeyAM	        = ql.KeyAM
							, @KeyAMI	        = ql.KeyAM + '-' + ISNULL(@CodPlant,'0000')
							, @KeyAMIL	        = ql.KeyAM + '-' + ISNULL(@CodPlant,'0000') + '-' + CAST(ISNULL(tps.HoleNum,0) AS NVARCHAR(10))
							, @ProdTeo	        = tps.ProdTeo
							, @ScTec	        = tps.ScTec
							, @KgTeo	        = tps.KgTeo
							, @NumSMED	        = tps.NumSMED
							, @RawMat	        = ql.RawMat
							, @BatchQty	        = ql.BatchQty
							, @ItemDescr        = i.ItemDescr
							, @CodifProfilo     = i.Class01
							, @ClasseMerc       = i.Class02
							, @CodClientAssoc   = i.Class03

				FROM dbo.QuoteList ql 
				INNER JOIN dbo.TabProdSc tps ON ql.KeyAM = tps.KeyAM 
				INNER JOIN dbo.ItemDet i ON ql.CodItem = i.CodItem
				WHERE	ql.QuoteType	= @QuoteType
					AND	ql.CodQuote		= @CodQuote
					AND	ql.QuoteRev		= @QuoteRev
				ORDER BY tps.KgTeo DESC

				-- =================================================================================
				-- recupero dall'offerta il valore del PACKAGE/IMBALLO scelto e i dati relativi
				-- Secondo la logica Client-Item-Package ( vedi funzione )
				-- =================================================================================
				-- SET @CodPackag = ( SELECT dbo.f_getCodPackag( @CodItem , @CodClient ) )
				-- attenzione è una function tabellare
				--SELECT @CodPackag = CodPackag, @PTotQta = TotQta, @PWeight = Weight, @PTare = Tare,
				--       @NumImb = NumImb, @PDurata = Durata, @PLiv = LivPackag , @PLivDett = LivPackagDet
				--FROM f_getDataCodPackag ( @CodItem, @CodClient)

				EXEC dbo.stp_getDataCodPackag @CodItem, @CodClient, @CodPackag = @CodPackag OUT, @TotQta = @PTotQta OUT, @Weight = @PWeight OUT, @Tare = @PTare OUT,
					   @NumImb = @NumImb OUT, @Durata = @PDurata OUT, @LivPackag = @PLiv OUT, @LivPackagDet = @PLivDett OUT

			END
		-- --------------------------------------------------------------------------------------------
		-- se offerta tipo 'S' non recupero dati da storico ma li cerco da tabella apposita..
		-- --------------------------------------------------------------------------------------------
		ELSE IF (@QuoteType = 'S')
			BEGIN
				 -- salvo i parametri da QuoteSimPar a #Quoteparam
				INSERT INTO #Quoteparam(Quotetype, CodQuote, QuoteRev ,ProcessNum, Descr, Parameter) 
				SELECT  Quotetype, CodQuote, QuoteRev, '01' AS ProcessNum, NomePar AS Descr, ValPar AS Parameter
				FROM    dbo.QuoteSimPar
				WHERE   QuoteType	= @QuoteType
					AND	CodQuote	= @CodQuote
					AND	QuoteRev	= @QuoteRev
					AND NomePar NOT IN ('CodDiesGroup', 'CodPlant')

				-- recupero parametri da SIM iniziali......
				;WITH myCTE as 
				(   -- Pivot table 
					SELECT CodDiesGroup, CodPlant, CodPackag, NetProd01_sim, NetProd04_sim
					FROM
					(   SELECT NomePar, ValPar 
						FROM dbo.QuoteSimPar
						WHERE QuoteType = @QuoteType AND CodQuote = @CodQuote AND QuoteRev = @QuoteRev ) AS SourceTable
					PIVOT ( MIN(ValPar) FOR NomePar IN ( CodDiesGroup, CodPlant, CodPackag, NetProd01_sim, NetProd04_sim )
					) AS PivotTable
				)

				SELECT  @CodDiesGroup   = CodDiesGroup,
						@CodPlant       = CodPlant,
						@CodPackag      = ISNULL(CodPackag, 0),
						@ProdTeo_sim    = NetProd01_sim,			-- ??? @ProdTeo_sim NON USATA?
						@ProdTeoImb_sim = NetProd04_sim				-- ??? @ProdTeoImb_sim NON USATA ?
				FROM myCTE
				

                -- 2014.10.12 anticipato calcolo x avere holeNum x chiave AMIL successiva...
				SELECT	    @CodDiesGroup   = ISNULL(@CodDiesGroup, '')
				SELECT	    @CodPlant       = ISNULL(@CodPlant, '')
				SELECT	    @CodPlantCMIL   = ISNULL(@CodPlant, '0000')
				SELECT	    @HoleNum        = dbo.f_getSubstring(@CodDiesGroup, '-', 3)

                -- 2014.09.09 FIX calcolo prod teorica imballo da lookup...
				SELECT	TOP 1 @ProdTeo	        = tps.ProdTeo							
				FROM dbo.QuoteList ql 
                    -- modifica 2014.10.12 messa chiave AMIL
				    --INNER JOIN dbo.TabProdSc tps ON ql.KeyAM = tps.KeyAM 
				    INNER JOIN dbo.TabProdSc tps ON ql.KeyAM  + '-' + @CodPlantCMIL + '-' + CAST(ISNULL(@HoleNum,0) AS NVARCHAR(10)) = tps.KeyAMIL 
				    WHERE	ql.QuoteType	= @QuoteType
					    AND	ql.CodQuote		= @CodQuote
					    AND	ql.QuoteRev		= @QuoteRev
				    ORDER BY tps.KgTeo DESC

				SELECT	TOP 1 @CodItem	    = ql.CodItem
							, @KeyAM	    = ql.KeyAM
							, @KeyAMI	    = ql.KeyAM + '-' + @CodPlantCMIL
							, @KeyAMIL	    = ql.KeyAM + '-' + @CodPlantCMIL + '-' + CAST(ISNULL(@HoleNum,0) AS NVARCHAR(10))
							, @ScTec	    = 0
							, @KgTeo	    = 0
							, @NumSMED	    = 0
							, @RawMat	    = ql.RawMat
							, @BatchQty	    = ql.BatchQty
							, @ItemDescr    = i.ItemDescr
							, @CodifProfilo = i.Class01
							, @ClasseMerc   = i.Class02
							, @CodClientAssoc = i.Class03

				FROM dbo.QuoteList ql 
				INNER JOIN dbo.ItemDet i ON ql.CodItem = i.CodItem
				WHERE	ql.QuoteType	= @QuoteType
					AND	ql.CodQuote		= @CodQuote
					AND	ql.QuoteRev		= @QuoteRev

				-- provo a caricare dati produzione da KeyAMIL + CodDiesGroup
				SELECT TOP 1  @ScTec	    = ISNULL(ScTec, 0)
							, @KgTeo	    = ISNULL(KgTeo, 0)
							, @NumSMED	    = ISNULL(NumSMED, 0)
                            -- 2014.08.22 - TOLTO NON deve usare la teorica...
							--, @ProdTeo	    = ISNULL(ProdTeo, 0) -- VERIFICARE!!! NON DOVREBBE FARLO... ha già calcolato
				FROM        dbo.TabProdSc
				WHERE       KeyAMIL = @KeyAMIL
					AND     CodDiesGroup = @CodDiesGroup


				-- =================================================================================
				-- carico dati package generali
				-- =================================================================================

				SELECT @PTotQta = TotQta, @PWeight = Weight, @PTare = Tare, @NumImb = NumImb, @PDurata = Durata
						 , @PLiv = 'Package', @PLivDett= CodPackag
				FROM dbo.Package2 WHERE CodPackag = @CodPackag

				--SELECT @CodPackag = CodPackag, @PTotQta = TotQta, @PWeight = Weight, @PTare = Tare,
				--       @NumImb = NumImb, @PDurata = Durata, @PLiv = LivPackag , @PLivDett = LivPackagDet
				--FROM f_getDataCodPackag ( @CodItem, @CodClient)

			END

		-- e aggiorno il CodPackage in QuoteRM
		UPDATE	dbo.QuoteRM
			SET CodPackag = ISNULL(@CodPackag,'')
		FROM dbo.QuoteRM
		WHERE	QuoteType	= @QuoteType
			AND	CodQuote	= @CodQuote
			AND	QuoteRev	= @QuoteRev

		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES  ( @QuoteType, @CodQuote, @QuoteRev, '01', 'ItemDescr',      @ItemDescr )
			,   ( @QuoteType, @CodQuote, @QuoteRev, '01', 'CodifProfilo',   @CodifProfilo )
			,   ( @QuoteType, @CodQuote, @QuoteRev, '01', 'ClasseMerc',     @ClasseMerc ) 
			,   ( @QuoteType, @CodQuote, @QuoteRev, '01', 'CodClientAssoc', @CodClientAssoc )

		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		SELECT  @QuoteType, @CodQuote, @QuoteRev, '01', 'ClientNameAssoc', ClientDet.ClientName
		FROM dbo.ClientDet 
		WHERE ClientDet.CodClient = @CodClientAssoc
		
		-- INFORMAZIONI su MATRICE
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES (@QuoteType, @CodQuote, @QuoteRev, '01', 'CodDiesGroup', ISNULL(@CodDiesGroup, '') )

		SET @strTemp = dbo.f_getSubstring(@CodDiesGroup, '-', 1) 
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES (@QuoteType, @CodQuote, @QuoteRev, '01', 'TipoDies', ISNULL(@strTemp, '') ) 

		SET @strTemp = dbo.f_getSubstring(@CodDiesGroup, '-', 2)
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES (@QuoteType, @CodQuote, @QuoteRev, '01', 'DiamDies', CASE WHEN ISNULL(@strTemp,'') = '' THEN 1 ELSE @strTemp END )
		
		SET @strTemp = dbo.f_getSubstring(@CodDiesGroup, '-', 3)
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES (@QuoteType, @CodQuote, @QuoteRev, '01', 'HoleNumDies', ISNULL(@strTemp, 1) )

		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '01', 'NumDiesInList', COUNT(CodDies)
		FROM	dbo.DiesDet
		WHERE	CodDiesGroup = @CodDiesGroup AND CodItem = @CodItem

        ------------------------------------------------------------------------------------------------------------
        -- 2014.09.10 faccio MODIFICA x contare matrici esauste da articolo SE disponibili...
        --
        SELECT	@NumDiesExaust = COUNT(CodDies)
		FROM	dbo.DiesDet
		WHERE	CodDiesGroup = @CodDiesGroup AND CodItem = @CodItem AND Active = 0

        -- se zero ricalcolo x gruppo e salvo...
        IF(@NumDiesExaust = 0)
            BEGIN
                SELECT	@NumDiesExaust = COUNT(CodDies)
		        FROM	dbo.DiesDet
		        WHERE	CodDiesGroup = @CodDiesGroup AND Active = 0
            END

        INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES  ( @QuoteType, @CodQuote, @QuoteRev, '01', 'NumDiesExaust'  , @NumDiesExaust)
		
		--INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		--SELECT	@QuoteType, @CodQuote, @QuoteRev, '01', 'NumDiesExaust', COUNT(CodDies)
		--FROM	dbo.DiesDet
		--WHERE	CodDiesGroup = @CodDiesGroup AND Active = 0
        --
        -- FINE modifica 2014.09.10
        ------------------------------------------------------------------------------------------------------------

		
		-- fix valori null!!
		SET @CodPlant   = ISNULL(@CodPlant, '')
		SET @KeyAM      = ISNULL(@KeyAM, '')
		SET @KeyAMIL    = ISNULL(@KeyAMIL, '')
		SET @NumSMED    = ISNULL(@NumSMED, 0) 
		SET @BatchQty   = ISNULL(@BatchQty, 0) 
		SET @KgTeo      = ISNULL(@KgTeo, 0)
		SET @RawMat     = ISNULL(@RawMat, '')
		SET @ProdTeo    = ISNULL(@ProdTeo, 0) 
		SET @ProdTeoImb = ISNULL(@ProdTeoImb, 0) 
		SET @ScTec      = ISNULL(@ScTec, 0)
			
		-- inserisco parametri calcolati x lavorazione estrusione
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES  ( @QuoteType, @CodQuote, @QuoteRev, '01', 'CodPlant'  , @CodPlant)
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'KeyAM'     , @KeyAM)
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'KeyAMIL'   , @KeyAMIL)
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'NumSMED'   , CONVERT(NVARCHAR(100) , @NumSMED))
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'KgTeo'     , CONVERT(NVARCHAR(100) , @KgTeo))

		-- -----------------------------------------
		---- inserisco lavorazione estrusione!
		-- -----------------------------------------
		-- *** verifica errori ***
		SELECT @errorScore  = @errorScore + CASE WHEN @ProdTeo = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN @ProdTeo = 0 THEN 0 ELSE @valid END

		INSERT INTO #QuoteWorkInt (QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, Class03, NetProd, WSR, valid)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '01', @CodPlant, @KeyAM, @KeyAMIL, @RawMat, @ProdTeo, @ScTec, @valid

		INSERT INTO #QuoteParam (QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '01', 'KgProdotti', ISNULL(SUM(KgTeo),0)
		FROM	dbo.QuoteList ql 
		INNER JOIN dbo.TabProdSc tps ON ql.KeyAM = tps.KeyAM
		WHERE	ql.QuoteType	= @QuoteType
			AND	ql.CodQuote		= @CodQuote
			AND	ql.QuoteRev		= @QuoteRev
			
		-- inserisco dati mancanti di MSR/CSR (scarto cesoia x estrusione) - DSR è NULLO x estrusione!
		UPDATE	#QuoteWorkInt
		SET     MSR = rmd.CSR
		FROM	#QuoteWorkInt qwi
		INNER JOIN dbo.RawMatDet rmd ON qwi.Class03 = rmd.RawMat

        IF (@QuoteType IN ('Q', 'R', 'C' ) )    -- Quotation, Reddittivity, Cost List
			BEGIN
		        -- calcolo i costi legati alla fase estrusione!
		        UPDATE	#QuoteWorkInt
		        SET		FC4UG = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE (cp.FC * cp.QuotaPlantStd / cp.QuotaManStd) / qwi.NetProd END
			          , VC4UG = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE (cp.VC * cp.QuotaPlantStd / cp.QuotaManStd) / qwi.NetProd END
			          , OH4UG = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE (cp.OH * cp.QuotaPlantStd / cp.QuotaManStd) / qwi.NetProd END
			          , SC4UG = CASE WHEN ql.BatchQty = 0                       THEN -99 ELSE cp.SC / ql.BatchQty END
			          , valid = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 OR ql.BatchQty = 0 THEN 0 ELSE qwi.valid END   -- attenzione che è già impostato sopra
		        FROM	#QuoteWorkInt qwi
		        INNER JOIN dbo.Cost2Plant cp ON qwi.CodPlant = cp.CodPlant AND qwi.ProcessNum = cp.ProcessNum
		        INNER JOIN dbo.QuoteList ql ON qwi.QuoteType = ql.QuoteType AND qwi.CodQuote = ql.CodQuote AND qwi.QuoteRev = ql.QuoteRev
		        WHERE	qwi.ProcessNum = '01'
		    END

        -- 2014.10.12 modifica x gestione del caso SIM come produttività da impiegare x calcoli
        ELSE IF (@QuoteType = 'S' ) 
            BEGIN
            
                -- calcolo i costi legati alla fase estrusione!
		        UPDATE	#QuoteWorkInt
		        SET		FC4UG = CASE WHEN @NetProd01_sim = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE (cp.FC * cp.QuotaPlantStd / cp.QuotaManStd) / @NetProd01_sim END
			          , VC4UG = CASE WHEN @NetProd01_sim = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE (cp.VC * cp.QuotaPlantStd / cp.QuotaManStd) / @NetProd01_sim END
			          , OH4UG = CASE WHEN @NetProd01_sim = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE (cp.OH * cp.QuotaPlantStd / cp.QuotaManStd) / @NetProd01_sim END
			          , SC4UG = CASE WHEN ql.BatchQty = 0                          THEN -99 ELSE cp.SC / ql.BatchQty END
			          , valid = CASE WHEN @NetProd01_sim = 0 OR cp.QuotaManStd = 0 OR ql.BatchQty = 0 THEN 0 ELSE qwi.valid END   -- attenzione che è già impostato sopra
		        FROM	#QuoteWorkInt qwi
		        INNER JOIN dbo.Cost2Plant cp ON qwi.CodPlant = cp.CodPlant AND qwi.ProcessNum = cp.ProcessNum
		        INNER JOIN dbo.QuoteList ql ON qwi.QuoteType = ql.QuoteType AND qwi.CodQuote = ql.CodQuote AND qwi.QuoteRev = ql.QuoteRev
		        WHERE	qwi.ProcessNum = '01'
            END

		-- *** verifica errori ***
		SELECT @errorScore  = @errorScore + CASE WHEN valid = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN valid = 0 THEN 0 ELSE @valid END
		FROM #QuoteWorkInt qwi
		--INNER JOIN dbo.Cost2Plant cp ON qwi.CodPlant = cp.CodPlant AND qwi.ProcessNum = cp.ProcessNum
		--INNER JOIN dbo.QuoteList ql ON qwi.QuoteType = ql.QuoteType AND qwi.CodQuote = ql.CodQuote AND qwi.QuoteRev = ql.QuoteRev
		WHERE	qwi.ProcessNum = '01'

		 -- inserisco lavorazione incestatura!
		INSERT INTO #QuoteWorkInt (QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, Class03)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '02', @CodPlant, @KeyAM, @KeyAMI, @RawMat
		
		-- inserisco dati mancanti di DSR x incestatura come 1 - OUT/IN
		UPDATE	#QuoteWorkInt
		SET		DSR   = CASE td.TotIN WHEN 0 THEN -99 ELSE 1 - CAST(td.TotOUT AS DECIMAL(18,6)) / CAST(td.TotIN AS DECIMAL(18,6)) END , 
				valid = CASE td.TotIN WHEN 0 THEN 0 ELSE 1 END
		FROM	#QuoteWorkInt qwi
		INNER JOIN dbo.TabDifett td ON qwi.Class02 = td.KeyAMI AND qwi.ProcessNum = td.ProcessNum
		WHERE	qwi.ProcessNum = '02' -- solo incestatura

		-- *** verifica errori ***
		SELECT @errorScore  = @errorScore + CASE WHEN qwi.valid = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN qwi.valid = 0 THEN 0 ELSE @valid END
		FROM	#QuoteWorkInt qwi
--        INNER JOIN dbo.TabDifett td ON qwi.Class02 = td.KeyAMI AND qwi.ProcessNum = td.ProcessNum
		WHERE	qwi.ProcessNum = '02' -- solo incestatura
		
		-- inserisco lavorazione FORNO!
		INSERT INTO #QuoteWorkInt(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, Class03)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '03', @CodPlant, @KeyAM, @KeyAMI, @RawMat
		
		-- inserisco lavorazione imballo!
		INSERT INTO #QuoteWorkInt(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, Class03, Class04, Class05)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', @CodPlant, @KeyAM, @KeyAMIL, @RawMat, @CodItem, @KeyAMI

        -- 2014.08.22 inserito passaggio di calcolo produttività simulata imballo a seconda caso 'S' o caso standard...
        DECLARE @valid04 BIT = 0
        IF (@QuoteType <> 'S')
            BEGIN
                SELECT  @ProdTeoImb = CASE @PDurata WHEN 0 THEN 0 ELSE @PTotQta / @PDurata END,
                        @valid04    = CASE WHEN @PDurata = 0 OR @PTotQta = 0 THEN 0 ELSE 1 END       -- @PTotQta non può essere mai = 0
            END
        ELSE
            BEGIN
                SELECT  @ProdTeoImb = CASE @PDurata WHEN 0 THEN 0 ELSE @PTotQta / @PDurata END,
                        @valid04    = 1 
            END

		UPDATE	qwi
			SET		NetProd = @ProdTeoImb,
					valid   = @valid04
		FROM	#QuoteWorkInt AS qwi
--		INNER JOIN dbo.TabImbArt ti ON qwi.Class04 = ti.KeyA
		WHERE	qwi.ProcessNum = '04' -- solo imballo

		-- *** controllo errori
		SELECT @errorScore  = @errorScore + CASE WHEN @PDurata = 0 OR @PTotQta = 0 OR @PWeight = 0 THEN 1 ELSE 0 END,           -- verificare @PWeight -> dove salvo l'errore?
			   @valid       =               CASE WHEN @PDurata = 0 OR @PTotQta = 0 OR @PWeight = 0 THEN 0 ELSE @valid END

		-- parametro num imballatori
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', 'QuotaMan', @NumImb
		
		-- parametro Livello search package/imballo
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', 'LivPackage', @PLiv

		-- parametro Livello search package/imballo
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', 'LivPackageDett', @PLivDett

		-- calcolo i costi legati alla fase di imballo!
        IF (@QuoteType IN ('Q', 'R', 'C' ) )    -- Quotation, Reddittivity, Cost List
			BEGIN
		        UPDATE	#QuoteWorkInt
		        SET		FC4UG = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE ( ( cp.FC * cp.QuotaPlantStd ) * ( @NumImb / cp.QuotaManStd ) ) / qwi.NetProd END
			          , VC4UG = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE ( ( cp.VC * cp.QuotaPlantStd ) * ( @NumImb / cp.QuotaManStd ) ) / qwi.NetProd END
			          , OH4UG = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE ( ( cp.OH * cp.QuotaPlantStd ) * ( @NumImb / cp.QuotaManStd ) ) / qwi.NetProd END
			          , SC4UG = CASE WHEN ql.BatchQty = 0                       THEN -99 ELSE cp.SC / ql.BatchQty END
			          , valid = CASE WHEN qwi.NetProd = 0 OR cp.QuotaManStd = 0 OR ql.BatchQty = 0 THEN 0 ELSE 1 END
		        FROM	#QuoteWorkInt qwi
		        INNER JOIN dbo.Cost2Plant cp ON qwi.CodPlant = cp.CodPlant AND qwi.ProcessNum = cp.ProcessNum
		        INNER JOIN dbo.QuoteList ql ON qwi.QuoteType = ql.QuoteType AND qwi.CodQuote = ql.CodQuote AND qwi.QuoteRev = ql.QuoteRev
		        WHERE	qwi.ProcessNum = '04' -- solo imballo
            END
        ELSE IF (@QuoteType = 'S') 
            BEGIN
		        UPDATE	#QuoteWorkInt
		        SET		FC4UG = CASE WHEN @NetProd04_sim = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE ( ( cp.FC * cp.QuotaPlantStd ) * ( @NumImb / cp.QuotaManStd ) ) / @NetProd04_sim END
			          , VC4UG = CASE WHEN @NetProd04_sim = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE ( ( cp.VC * cp.QuotaPlantStd ) * ( @NumImb / cp.QuotaManStd ) ) / @NetProd04_sim END
			          , OH4UG = CASE WHEN @NetProd04_sim = 0 OR cp.QuotaManStd = 0 THEN -99 ELSE ( ( cp.OH * cp.QuotaPlantStd ) * ( @NumImb / cp.QuotaManStd ) ) / @NetProd04_sim END
			          , SC4UG = CASE WHEN ql.BatchQty = 0                          THEN -99 ELSE cp.SC / ql.BatchQty END
			          , valid = CASE WHEN @NetProd04_sim = 0 OR cp.QuotaManStd = 0 OR ql.BatchQty = 0 THEN 0 ELSE 1 END
		        FROM	#QuoteWorkInt qwi
		        INNER JOIN dbo.Cost2Plant cp ON qwi.CodPlant = cp.CodPlant AND qwi.ProcessNum = cp.ProcessNum
		        INNER JOIN dbo.QuoteList ql ON qwi.QuoteType = ql.QuoteType AND qwi.CodQuote = ql.CodQuote AND qwi.QuoteRev = ql.QuoteRev
		        WHERE	qwi.ProcessNum = '04' -- solo imballo
            END

		-- *** verifica errori ***
		SELECT @errorScore  = @errorScore + CASE WHEN qwi.valid = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN qwi.valid = 0 THEN 0 ELSE @valid END
		FROM	#QuoteWorkInt qwi
		--INNER JOIN dbo.Cost2Plant cp ON qwi.CodPlant = cp.CodPlant AND qwi.ProcessNum = cp.ProcessNum
		--INNER JOIN dbo.QuoteList ql ON qwi.QuoteType = ql.QuoteType AND qwi.CodQuote = ql.CodQuote AND qwi.QuoteRev = ql.QuoteRev
		WHERE	qwi.ProcessNum = '04' -- solo imballo

		-- inserisco dati mancanti di DSR x imballo come 1 - OUT/IN
		UPDATE	#QuoteWorkInt
		SET		DSR = 1 - ( CASE WHEN CAST(td.TotIN AS DECIMAL(18,6)) = 0 THEN 1 ELSE CAST(td.TotOUT AS DECIMAL(18,6)) / CAST(td.TotIN AS DECIMAL(18,6)) END ) ,
				valid = CASE WHEN td.TotIN = 0 THEN 0 ELSE 1 END
		FROM	#QuoteWorkInt qwi
		INNER JOIN dbo.TabDifett td ON qwi.Class05 = td.KeyAMI AND qwi.ProcessNum = td.ProcessNum 
		WHERE	qwi.ProcessNum = '04' -- solo imballo

		-- *** verifica errori ***
		SELECT @errorScore  = @errorScore + CASE WHEN qwi.valid = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN qwi.valid = 0 THEN 0 ELSE @valid END
		FROM	#QuoteWorkInt qwi
		--INNER JOIN dbo.TabDifett td ON qwi.Class05 = td.KeyAMI AND qwi.ProcessNum = td.ProcessNum 
		WHERE	qwi.ProcessNum = '04' -- solo imballo
		
		-- recupero le MAC fase 01
		SELECT	 @MAC_SC	= MCR
				,@MAC_ST	= WCR
		FROM	#QuoteWorkInt
		WHERE	ProcessNum  = '01'

		-- recupero le MAC fase 02
		SELECT	@MAC_IN	    = DCR
		FROM	#QuoteWorkInt
		WHERE   ProcessNum  = '02'

		-- recupero le MAC fase 04
		SELECT	@MAC_IM		= DCR
		FROM	#QuoteWorkInt
		WHERE	ProcessNum  = '04'

		-- calcolo percentuale vendita rottame
		SELECT	@SSR = SSR
		FROM	dbo.RawMatDet
		WHERE	RawMat = @RawMat
				

		-- NOTA :   la transazione posso probabilmente iniziarla qui visto che è il 
		--          primo Update/insert/delete su tabelle non temporanee delete a parte
		 IF (@QuoteType = 'S')
			BEGIN
				-- recupero i 3 scarti...
				DECLARE @WSR01_sim  DECIMAL(18,6) = 0
				DECLARE @MSR01_sim  DECIMAL(18,6) = 0
				DECLARE @DSR_sim    DECIMAL(18,6) = 0

				 -- recupero parametri da SIM iniziali......
				;WITH myCTE2 as
				(
					-- Pivot table 
					SELECT WSR01_sim, MSR01_sim, DSR_sim
					FROM
					(SELECT NomePar, ValPar 
						FROM dbo.QuoteSimPar
						WHERE QuoteType = @QuoteType
						AND CodQuote    = @CodQuote
						AND QuoteRev    = @QuoteRev
						) AS SourceTable
					PIVOT
					( MIN(ValPar) 
						FOR NomePar IN
						(
							WSR01_sim, MSR01_sim, DSR_sim
						)
					) AS PivotTable
				)

				SELECT  @MAC_ST_sim     = 1 / (1 - CONVERT(DECIMAL(18,6), WSR01_sim)),
						@MAC_SC_sim     = 1 / (1 - CONVERT(DECIMAL(18,6), MSR01_sim)),
						@MAC_IN_sim     = 1,
						@MAC_IM_sim     = 1 / (1 - CONVERT(DECIMAL(18,6), DSR_sim))
				FROM    myCTE2

				-- salvo la messa a cento da simulazione in variabile
				SET     @FCR_sim = CASE WHEN ( @MAC_ST_sim * @MAC_SC_sim * @MAC_IN_sim * @MAC_IM_sim ) = 0 
										THEN 1 
										ELSE ( @MAC_ST_sim * @MAC_SC_sim * @MAC_IN_sim * @MAC_IM_sim ) 
								   END

				-- salvo in tabella!
				UPDATE	dbo.QuoteRM
				SET		FCR = ISNULL(@FCR_sim,1)
				WHERE	QuoteType	= @QuoteType
					AND	CodQuote	= @CodQuote
					AND	QuoteRev	= @QuoteRev
					AND	RawMat		= @RawMat
			END
		 ELSE
			BEGIN    
				-- update rese RawMat!
				UPDATE	dbo.QuoteRM
				SET		FCR = @MAC_SC * @MAC_ST * @MAC_IN * @MAC_IM
				WHERE	QuoteType	= @QuoteType
					AND	CodQuote	= @CodQuote
					AND	QuoteRev	= @QuoteRev
					AND	RawMat		= @RawMat
			END
		-- inserisco i costi delle utilities in QuoteOC
			
		-- inserisco altri costi x lavorazione estrusione! GAS ed EE
		INSERT INTO #QuoteOC(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, TotQty, TotCost, Quota)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '01', @CodPlant, CodUtil, @RawMat, @BatchQty, ISNULL(UnitCost * @BatchQty, 0), 1
		FROM	dbo.Utilities
		WHERE	CodPlant = @CodPlant

		-- *** controllo errori - se non trovo costi GAS ed EE segnalo errore
		IF @@ROWCOUNT = 0
		   SET @validStep = 0;
		ELSE       
		   SET @validStep = 1;

		SELECT @errorScore  = @errorScore + CASE WHEN @validStep = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN @validStep = 0 THEN 0 ELSE @valid END
		
		/*************************************************************
		* MATRICE
		*
		* calcolo prezzo e durata matrice con procedura a 5 step...
		* A) media ponderata prezzo ed ExpLife da DiesDet selezionando x CodItem + CodDiesGroup 
		* B) EOLLife x media ponderata su DiesDet dove Active = 0 e vita cmq superiore 5000 KG ( escludendo rotture accidentali )
		* C) SE prezzo = 0 --> prendo prezzo da DiesGroupDet selezionando x CodDiesGroup
		* D) Se EOL = 0 --> prendo ExpLife della singola matrice, se è 0 --> prendo EOLLife da DiesGroupDet selezionando x CodDiesGroup
		* E) Calcolo Price / Life
		*
		*************************************************************/

		-- se sono in simulazione leggo tutto direttamente da tab dbo.DiesGroupDet
		IF (@QuoteType = 'S')
			BEGIN
				SELECT	@DiesPrice      = Price,
						@DiesExpLife    = ExpLife, 
						@DiesEOLife     = CASE WHEN EOLLife > 0 THEN EOLLife ELSE ExpLife END, 
						@DiesByClass    = 1 -- imposto come calcolata matrice da gruppo
				FROM	dbo.DiesGroupDet
				WHERE	CodDiesGroup	= @CodDiesGroup
			END

		ELSE
			BEGIN

				-- (A) da DiesDet
				SELECT	@DiesPrice		= CASE WHEN SUM(ISNULL(ActLife, 1)) <> 0 THEN SUM(ISNULL(Price, 0)   * ISNULL(ActLife, 1)) / SUM(ISNULL(ActLife, 1)) END, 
						@DiesExpLife	= CASE WHEN SUM(ISNULL(ActLife, 1)) <> 0 THEN SUM(ISNULL(ExpLife, 0) * ISNULL(ActLife, 1)) / SUM(ISNULL(ActLife, 1)) END
				FROM	dbo.DiesDet
				WHERE	CodItem			= @CodItem 
					AND	CodDiesGroup	= @CodDiesGroup
				GROUP BY CodItem, CodDiesGroup

				-- (B) da DiesDet
				SELECT	@DiesEOLife		= AVG( ISNULL(ActLife, 0))
				FROM	dbo.DiesDet
				WHERE	CodItem			= @CodItem 
					AND	CodDiesGroup	= @CodDiesGroup
					AND	Active			= 0          -- solo matrici rottamate
					AND ActLife         > 5000       -- solo se hanno Life > 5000 Kg ( non rotture accidentali )
				GROUP BY CodItem, CodDiesGroup        
			END

		-- continuo!
		SET	@DiesPrice		= ISNULL(@DiesPrice,0)
		SET	@DiesExpLife	= ISNULL(@DiesExpLife,0)
		SET	@DiesEOLife		= ISNULL(@DiesEOLife,0)
		SET @validStep      = 1

		-- (C) verifico se prezzo è OK...
		IF (@DiesPrice = 0)
		BEGIN
			-- calcolo da DiesGroupDet
			SELECT	@DiesPrice		= ISNULL(Price, 0), @DiesByClass = 1 -- imposto come calcolata matrice da gruppo
			FROM	dbo.DiesGroupDet
			WHERE	CodDiesGroup	= @CodDiesGroup
		END
		
		-- (D) verifico se vita è OK...
		IF (@DiesEOLife = 0)
		BEGIN
			-- uso exp life articolo...
			SET	@DiesEOLife = @DiesExpLife
		END

		-- controllo che non sia nulla/vuota la durata...
		IF (@DiesEOLife = 0)
		BEGIN
			SELECT	@DiesEOLife = CASE WHEN EOLLife > 0 THEN EOLLife ELSE ExpLife END, 
					@DiesByClass = 1                                -- imposto come calcolata matrice da gruppo
			FROM	dbo.DiesGroupDet
			WHERE	CodDiesGroup	= @CodDiesGroup
		END
		
		-- controllo che non sia nulla/vuota la durata...
		IF ( @DiesEOLife > 0 AND @DiesPrice > 0 )
		  BEGIN 
			-- (E) Calcolo price/life!
			SET	@DiesPriceLife = @DiesPrice / @DiesEOLife
		  END
		ELSE 
		  BEGIN
			SET @DiesPriceLife = 0              -- metto a zero il DiesPriceLife
			SET @validStep     = 0              -- indico che valore non è valido  ( ND excel )
		  END
		
		 -- se è una simulazione uso cmq i valori caricati e non calcolati
		 IF (@QuoteType = 'S')
			BEGIN
				-- recupero i costi matrice da simulazione
				DECLARE @DiesPrice_sim DECIMAL(9,3) = 0
				DECLARE @DiesCommLife  DECIMAL(9,2) = 0 -- questa mi serve dopo?
				DECLARE @DiesTecLife   DECIMAL(9,2) = 0

				;WITH myCTE2 as
				(   -- Pivot table 
					SELECT DiesPrice_sim, DiesCommLife, DiesTecLife
					FROM
					(   SELECT NomePar, ValPar 
						FROM dbo.QuoteSimPar
						WHERE QuoteType = @QuoteType AND CodQuote = @CodQuote AND QuoteRev = @QuoteRev
					) AS SourceTable
					PIVOT ( MIN(ValPar) FOR NomePar IN ( DiesPrice_sim, DiesCommLife, DiesTecLife )
					) AS PivotTable
				)
				SELECT  @DiesPrice_sim  = DiesPrice_sim,
						@DiesCommLife   = DiesCommLife,
						@DiesTecLife    = DiesTecLife
				FROM    myCTE2              
				
				IF ( ISNULL(@DiesPrice_sim,0) = 0 OR ISNULL(@DiesTecLife,0) = 0 )
				BEGIN
				   SET @DiesPriceLife = 0
				   SET @validStep     = 0
				END
				ELSE 
				BEGIN
					SET @DiesPriceLife = @DiesPrice_sim / @DiesTecLife
					SET @validStep = 1   -- potrebbe essere stato messo = 0 da Quote non di simulazione
				END
		   END

		-- inserisco costi per Matrice: costo e durata da matrice, se non ci sono da gruppo, (anche solo uno dei due, ovviamente più facile trovare durata x matrice...)
		INSERT INTO #QuoteOC(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, TotQty, TotCost, Quota, valid)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '01', @CodPlant, 'MATRICE', @RawMat, @BatchQty, ISNULL(@DiesPriceLife * @BatchQty, 0), 1, @validStep

		-- *** controllo errori
		SELECT @errorScore  = @errorScore + CASE WHEN @validStep = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN @validStep = 0 THEN 0 ELSE @valid END

		-- inserisco parametri calcolati x matrice
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES	( @QuoteType, @CodQuote, @QuoteRev, '01', 'DiesPrice',   CONVERT(NVARCHAR(100), @DiesPrice) )
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'DiesExpLife', CONVERT(NVARCHAR(100), @DiesExpLife) )
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'DiesEOLife',  CONVERT(NVARCHAR(100), @DiesEOLife) )
			   ,( @QuoteType, @CodQuote, @QuoteRev, '01', 'DiesByClass', CONVERT(NVARCHAR(100), ISNULL(@DiesByClass,0)) )

		/*************************************************************
		* VENDITA ROTTAME
		*
		* calcolo COSTO DI VENDITA PER LE 2 FASI ESTRUSIONE 01 ED IMBALLO 04
		* - calcolo costi variabili fase 01 / 04
		* - calcolo costo di vendita x fase 01 / 04
		*************************************************************/

		SELECT	@OCF01 = SUM(ISNULL(C4UG,0))
		FROM	#QuoteOC
			
		SELECT	@VCF01 = @OCF01 + VC4UG	
		FROM	#QuoteWorkInt
		WHERE	ProcessNum	= '01'
			
		SELECT	@VCF04 = @OCF01 + SUM(VC4UG)
		FROM	#QuoteWorkInt
			
		SELECT	@SellCostF01 =  CASE WHEN @QuoteType = 'S' THEN ((@MAC_ST_sim * @MAC_SC_sim * @MAC_IN_sim) - 1) ELSE ((@MAC_ST * @MAC_SC * @MAC_IN) - 1) END
									* (q.RawMatCost  + q.RawMatExtraCost - CASE WHEN SSVA > 0 THEN SSVA ELSE q.RawMatCost * SSVR END + @VCF01) 
									-- ((prodotto delle MAC = inverso del prodotto delle rese) - 1) * (costo Al - prezzo rivendita + costi var fase 01)
			  , @RefCostF01  = -- ( (A - B) / 100 - C )
							   (
								-- (A) = (costo pieno di acquisto + costi fase 1) * MAC * 100 (IN CENTESIMI)
								((q.RawMatCost + q.RawMatExtraCost + @VCF01) * 
								CASE WHEN @QuoteType = 'S' THEN (@MAC_ST_sim * @MAC_SC_sim * @MAC_IN_sim * 100) ELSE  (@MAC_ST * @MAC_SC * @MAC_IN * 100) END
								)
					 -- (B) = ((MAC * 100) - 100) * Resa di fonderia * (costo pieno acquisto - costo di trasformazione))
							  -	CASE WHEN @QuoteType = 'S' THEN ((@MAC_ST_sim * @MAC_SC_sim * @MAC_IN_sim * 100) - 100) ELSE ((@MAC_ST * @MAC_SC * @MAC_IN * 100) - 100) END
									* rmd.ProcYield * (q.RawMatCost + q.RawMatExtraCost + @VCF01 - rmd.ProcCost)
							   ) / 100 -- divido per 100 finale
								-- (C) = sottraggo costo pieno alluminio
							  - (q.RawMatCost + q.RawMatExtraCost + @VCF01)
		FROM	dbo.RawMatDet rmd 
		INNER JOIN dbo.QuoteRM q ON q.RawMat = rmd.RawMat
		WHERE	q.QuoteType	= @QuoteType
			AND	q.CodQuote	= @CodQuote
			AND	q.QuoteRev	= @QuoteRev
			AND	q.RawMat	= @RawMat
			
		SELECT	@SellCostF04 = CASE WHEN @QuoteType = 'S' THEN ((@MAC_IM_sim) - 1) ELSE ((@MAC_IM) - 1) END 
									* (q.RawMatCost  + q.RawMatExtraCost - CASE WHEN SSVA > 0 THEN SSVA ELSE q.RawMatCost * SSVR END + @VCF01 + @VCF04) 
									-- ((prodotto delle MAC = inverso del prodotto delle rese) - 1) * (costo Al - prezzo rivendita + costi var fase 01 e fase 04)
			  , @RefCostF04  = -- ( (A - B) / 100 - C )
							   (
								-- (A) = (costo pieno di acquisto + costi variabili fase 1 e 4) * MAC * 100 (IN CENTESIMI)
								((q.RawMatCost + q.RawMatExtraCost + @VCF01 + @VCF04) * 
								CASE WHEN @QuoteType = 'S' THEN (@MAC_IM_sim * 100) ELSE (@MAC_IM * 100) END
								)
								-- (B) = ((MAC * 100) - 100) * Resa di fonderia * (costo pieno acquisto - costo di trasformazione))
							  -	CASE WHEN @QuoteType = 'S' THEN ((@MAC_IM_sim * 100) - 100) ELSE ((@MAC_IM * 100) - 100) END 
									* rmd.ProcYield * (q.RawMatCost + q.RawMatExtraCost + @VCF01 + @VCF04 - rmd.ProcCost)
							   ) / 100 -- divido per 100 finale
								-- (C) = sottraggo costo pieno alluminio
							  - (q.RawMatCost + q.RawMatExtraCost + @VCF01 + @VCF04)

							  -- NOTA: usiamo (q.RawMatCost + q.RawMatExtraCost + @VCF01) e non (q.RawMatCost + q.RawMatExtraCost + @VCF01 + @RefCostF01) perché la differenza è minimale, si tratta di 10/20 PPM...

		FROM	dbo.RawMatDet rmd 
		INNER JOIN dbo.QuoteRM q ON q.RawMat = rmd.RawMat
		WHERE	q.QuoteType	= @QuoteType
			AND	q.CodQuote	= @CodQuote
			AND	q.QuoteRev	= @QuoteRev
			AND	q.RawMat	= @RawMat
		
		-- inserisco costi per VENDITA
		INSERT INTO #QuoteOC(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01, Class02, TotQty, TotCost, Quota)
		VALUES ( @QuoteType, @CodQuote, @QuoteRev, '01', @CodPlant, 'VENDITA', @RawMat, @BatchQty, ISNULL(@SellCostF01 * @BatchQty, 0), @SSR )
		-- inserisco costi per ROTTAME
			  ,( @QuoteType, @CodQuote, @QuoteRev, '01', @CodPlant, 'ROTTAME', @RawMat, @BatchQty, ISNULL(@RefCostF01 * @BatchQty, 0), 1 - @SSR )
		-- inserisco costi per VENDITA
			  ,( @QuoteType, @CodQuote, @QuoteRev, '04', @CodPlant, 'VENDITA', @RawMat, @BatchQty, ISNULL(@SellCostF04 * @BatchQty, 0), @SSR )
		-- inserisco costi per ROTTAME
			  ,( @QuoteType, @CodQuote, @QuoteRev, '04', @CodPlant, 'ROTTAME', @RawMat, @BatchQty, ISNULL(@RefCostF04 * @BatchQty, 0), 1 - @SSR )
	
		-- calcolo Package Cost e RMWeight da tab PackageDet
		-- EXEC stp_packageCost @CodItem, @CodClient, @CodPackag, @PDesc=@PkgDesc OUTPUT, @RMWeight=@PRMWeight OUTPUT, @Weight=@PWeight OUTPUT, @Tare=@PTare OUTPUT, @PackCost=@PCost OUTPUT, @TareStRat=@PTareStRatio OUTPUT
		-- stored sostituita perchè la maggior parte dei calcoli li ho già fatti
		SELECT	@PCost          = CASE @PWeight WHEN 0 THEN 0 ELSE RMCost / @PWeight END
			  , @PRMWeight      = RMWeight
			  , @PkgDesc        = PackagDesc
			  , @PTareStRatio   = CASE @PWeight WHEN 0 THEN 0 ELSE ( RMWeight - @PTare) / @PWeight END
		FROM	dbo.PackagDet
		WHERE	CodPackag = @CodPackag

		-- inserisco costi per IMBALLO
		INSERT INTO #QuoteOC(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01,  Class02, TotQty, TotCost, Quota, valid)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', @CodPlant, 'IMBALLO', @RawMat, @BatchQty, ISNULL(@PCost * @BatchQty, 0), 1, CASE WHEN ISNULL(@PCost * @BatchQty, 0) = 0 THEN 0 ELSE 1 END
				
		-- *** controllo errori - costo imballo non può essere = 0
		SELECT @errorScore  = @errorScore + CASE WHEN ISNULL(@PCost * @BatchQty, 0) = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN ISNULL(@PCost * @BatchQty, 0) = 0 THEN 0 ELSE @valid END

		-- inserisco parametri calcolati x imballaggio
		INSERT INTO #QuoteParam(QuoteType, CodQuote, QuoteRev, ProcessNum, Descr, Parameter)
		VALUES   ( @QuoteType, @CodQuote, @QuoteRev, '04', 'PkgDesc',                            @PkgDesc )
				,( @QuoteType, @CodQuote, @QuoteRev, '04', 'PRMWeight',   CONVERT(NVARCHAR(100), @PRMWeight ) )
				,( @QuoteType, @CodQuote, @QuoteRev, '04', 'PWeight',     CONVERT(NVARCHAR(100), @PWeight ) ) 
				,( @QuoteType, @CodQuote, @QuoteRev, '04', 'PTare',       CONVERT(NVARCHAR(100), @PTare) )
				,( @QuoteType, @CodQuote, @QuoteRev, '04', 'TareStRatio', CONVERT(NVARCHAR(100), @PTareStRatio ) )
		
		
		---------------------------------------------	
		-- inserisco costi per TRASPORTI
		---------------------------------------------
		-- recupero tipo di trasporto ( se ha costi o meno )
		SELECT	@HasTC = i.HasTC
		FROM	dbo.QuoteList q 
		INNER JOIN dbo.Incoterms i ON q.CodInco = i.CodInco
		WHERE	q.QuoteType	= @QuoteType
			AND	q.CodQuote	= @CodQuote
			AND	q.QuoteRev	= @QuoteRev

		-- Se non trovo @HasTC setto i valori in modo che diano errore
		IF @HasTC IS NULL
			BEGIN 
			   SET @HasTC      =  1
			   SET @TranspCost =  0
			END
		ELSE
			BEGIN 
				-- recupero zona da cliente...
				SELECT	@TranspZone = TranspZone
				FROM	dbo.ClientDet	
				WHERE	CodClient	= @CodClient

				-- recupero costi trasporto 
				SELECT	@TranspCost = TranspCost     -- se non lo trova rimane a 0
				FROM	dbo.TranspCostDet
				WHERE	TranspZone	= @TranspZone
			END

		INSERT INTO #QuoteOC(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01,  Class02, TotQty, TotCost, Quota, valid)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', @CodPlant, 'TRASPORTI', @RawMat, @BatchQty, ISNULL(@HasTC * @TranspCost * @BatchQty, 0), 1
			  , CASE WHEN @HasTC = 1 AND @TranspCost = 0 THEN 0 ELSE 1 END 

		-- *** controllo errori - se previsti costi imballo allora devo avere il costo <> 0
		SELECT @errorScore  = @errorScore + CASE WHEN @HasTC = 1 AND @TranspCost = 0 THEN 1 ELSE 0 END,
			   @valid       =               CASE WHEN @HasTC = 1 AND @TranspCost = 0 THEN 0 ELSE @valid END
  
		
		---------------------------------------------	
		-- inserisco costi per PROVVIGIONI
		---------------------------------------------
		IF (@QuoteType = 'R') OR (@QuoteType = 'S')     -- SOLO se R o S prima leggo dai dati caricati negli ordini
		  BEGIN
			SELECT @Provvig = CONVERT(DECIMAL(9,6),ValPar) FROM dbo.QuoteSimPar 
			WHERE NomePar = 'ProvvCost' 
			  AND QuoteType=@QuoteType AND CodQuote=@CodQuote AND QuoteRev=@QuoteRev
		  END

		-- leggo da tabella agenti
		IF ISNULL(@Provvig, 0) = 0
		  BEGIN
			SELECT	@Provvig = ISNULL(a.QuotaProvvAg, 0)
			FROM	dbo.AgentsDet a
			INNER JOIN dbo.ClientDet c ON a.CodAg = c.CodAg
			INNER JOIN dbo.QuoteList q ON q.CodClient = c.CodClient
			WHERE	q.QuoteType	= @QuoteType
				AND	q.CodQuote	= @CodQuote
				AND	q.QuoteRev	= @QuoteRev
		 END

		-- fix eventuali valori null
		SET @Provvig =  ISNULL(@Provvig, 0)

		-- inserisco costi per PROVVIGIONI
		INSERT INTO #QuoteOC(QuoteType, CodQuote, QuoteRev, ProcessNum, CodPlant, Class01,  Class02, TotQty, TotCost, Quota)
		SELECT	@QuoteType, @CodQuote, @QuoteRev, '04', @CodPlant, 'PROVVIGIONI', @RawMat, @BatchQty, ISNULL(@Provvig * @BatchQty, 0), 1

		/* ==================================================
			 CARICO TABELLE EFFETTIVE
		   ==================================================*/

		-- carico quote parametri!
		INSERT dbo.QuoteParam
		SELECT * FROM #QuoteParam

		-- carico lavorazioni INTERNE!
		INSERT dbo.QuoteWorkInt  -- ci sono valori calcolati quindi devo selezionare i campi
		SELECT QuoteType, CodQuote, QuoteRev, NumWI, ProcessNum, CodPlant, Class01, Class02, Class03, Class04, Class05
			 , NetProd, WSR, MSR, DSR, FC4UG, VC4UG, OH4UG, SC4UG, valid 
		FROM #QuoteWorkInt

		---- *** verifica errori ***
		SELECT DISTINCT @errorScore  = @errorScore + CASE WHEN TotQty = 0 THEN 1 ELSE 0 END,
						@valid       =               CASE WHEN TotQty = 0 THEN 0 ELSE @valid END
		FROM #QuoteOC

		---- carico OTHERCOSTS
		INSERT dbo.QuoteOC  -- ci sono valori calcolati quindi devo selezionare i campi
		SELECT QuoteType, CodQuote, QuoteRev, NumEx, ProcessNum, CodPlant, Class01, Class02
			 , Class03, Class04, Class05
			 , CASE TotQty WHEN 0 THEN 1 ELSE TotQty END   -- evito errore in campo calcolato se TotQty = 0
			 , TotCost, Quota, valid
		FROM #QuoteOC

		-- update valori di errore generale
		UPDATE	dbo.QuoteList
		SET		valid			= @valid
			  , errorScore		= @errorScore
		WHERE	QuoteType		= @QuoteType
			AND	CodQuote		= @CodQuote
			AND	QuoteRev		= @QuoteRev

	COMMIT TRAN;
	
	--SELECT COUNT(*) FROM #QuoteParam
	--SELECT COUNT(*) FROM #QuoteWorkInt
	--SELECT COUNT(*) FROM #QuoteOC

	-- elimino temp table... NON serve nella stored
	--IF OBJECT_ID('tempdb..#QuoteParam') IS NOT NULL
	--	DROP TABLE #QuoteParam
	--IF OBJECT_ID('tempdb..#QuoteWorkInt') IS NOT NULL
	--	DROP TABLE #QuoteWorkInt
	--IF OBJECT_ID('tempdb..#QuoteOC') IS NOT NULL
	--	DROP TABLE #QuoteOC

END