3dprinting/LuaLibs/AddManData.lua

-- AddManData.lua by Egaltech s.r.l. 2022/04/12
-- Raccolta costanti generali per Stampa 3d

-- Tabella per definizione modulo
local AddManData = {}

-- Intestazioni
require( 'EgtBase')

EgtOutLog( ' AddManData started', 1)

---------------------------------------------------------------------
SLICE_LAYER = "Slice"
CONTOUR_GRP = "Crv"
OUTER_CRV = "OuterCrv"
PATH_GRP = "Path"
SOLID_GRP = "Solid"
TOOLPATH_GRP = "ToolPath"
LAYER_SRF = "LayerSurf"
SHELL_CRV = "Shell"
INFILL_CRV = "Infill"
COASTING_CRV = "Coasting"
WIPE_CRV = "Wipe"
LEAD_IN_CRV = "LeadIn"
LEAD_OUT_CRV = "LeadOut"
FRAME_PART = "FramePart"
START_POINT = "StartPoint"

MIN_LEN = 0.1
MIN_AREA = 0.01

-- Parametri di lavorazione
SEC_DEFAULT = "Default"
KEY_SLICING_45 = "Slicing45"
KEY_SLICING_DIR="SlicingDir"
KEY_SLICE_STEP = "StrandH"
KEY_SHELLS_NBR = "StrandCount"
KEY_STRAND = "StrandW"
KEY_OFFSET_SLICE ="Offset"
KEY_SP_OFFSET_ON_SLICE = "StartPointOffsetOnSlice"
KEY_PRINT_ORDER = "StrandOrder"
KEY_PRINT_DIRECTION = "Direction"
KEY_TYPE = "Type"
KEY_LINK_TYPE = "LinkType"
KEY_LINK_PARAM = "LinkParam"
KEY_LINK_ZUP = "LinkZup"
KEY_FLOOR_NBR = "FloorCount"
KEY_SPEED = "Speed"
KEY_FEED = "Feed"
KEY_EXT_FEED = "ExtFeed"
KEY_INT_FEED = "IntFeed"
KEY_INFILL_FEED = "InfillFeed"
KEY_LEAD_IN_FEED = "LeadInFeed"
KEY_LEAD_OUT_FEED = "LeadOutFeed"
KEY_SUPPORT_FEED = "SupportFeed"
KEY_G0_FEED = "G0Feed"
KEY_MATERIAL = "Material"
KEY_LEAD_IN_TYPE = "LeadIn"
KEY_LEAD_IN_TANG_DIST = "LeadInTangDist"
KEY_LEAD_IN_ORTHO_DIST = "LeadInOrthoDist"
KEY_LEAD_OUT_TYPE = "LeadOut"
KEY_LEAD_OUT_TANG_DIST= "LeadOutTangDist"
KEY_LEAD_OUT_ORTHO_DIST= "LeadOutOrthoDist"
KEY_OFFSET_LEAD_POINT = "OffsetLeadPoint"
KEY_COASTING_LEN = "CoastingLen"
KEY_COASTING_FEED = "CoastingFeed"
KEY_WIPE_LEN = "WipeLen"
KEY_WIPE_FEEDPU = "WipeFeedPu"
KEY_TOOL_DIAM = "ToolDiam" 
KEY_SETTI_OVERLAP = "SettiOverlap"
KEY_SETTI_SHELLS_NBR = "SettiStrandCount"
KEY_SETTI_LINK = "SettiLink"
KEY_SETTI_INVERT_DIR = "SettiInvertDirection"
KEY_SETTI_INVERT_ORDER = "SettiInvertOrder"
KEY_SETTI_LEAD_IN_INVERT = "SettiLeadInInvert"
KEY_SETTI_LEAD_IN_LEN = "SettiLeadInLen"
KEY_SETTI_LEAD_OUT_INVERT = "SettiLeadOutInvert"
KEY_SETTI_LEAD_OUT_LEN = "SettiLeadOutLen"
KEY_SETTI_LEAD_OUT_WIPE1 = "SettiLeadOutWipeTang"
KEY_SETTI_LEAD_OUT_WIPE2 = "SettiLeadOutWipe"
KEY_SETTI_LEAD_OUT_WIPE_DIR = "SettiLeadOutWipeDir"

-- Parametri di macchina
SEC_3DPRINTING = "3dPrinting"
KEY_COEFF_X = "CoeffX"
KEY_COEFF_Y = "CoeffY"

-- Altre chiavi
KEY_SLICE_NBR = "SliceNbr"
KEY_SLICE_Z = "SliceZ"
KEY_SLICE_DELTAZ = "DeltaZ"
KEY_START_POINT = "StartPoint"


TYPE = {
   OUTER_SHELL = 1,
   INNER_SHELL = 2,
   INFILL = 3,
   LINK = 4,
   COASTING = 5,
   WIPE = 6,
   SETTO = 7,
}

PRINT_ORDER = {
   EXT_INT_INF = 1,
   INF_INT_EXT = 2,
}

PRINT_DIRECTION = {
   CCW = 1,
   CW = 2,
}

LINK_TYPE = {
   NONE = 1,
   LINEAR = 2,
   BIARC = 3,   
}

LEAD_TYPE = {
   NONE = 1,
   LINEAR = 2,
   ARC = 3,
}


---------------------------------------------------------------------

TABLE = "Table"
TABLE_OUTLINE = "Outline"
TABLE_SURFACE = "Surface"
PART = "Part"
ORIGINAL_SOLID = "OriginalSolid"
LAY_AUX = "Aux"
LAY_WALLS = "Walls"
VIEWPARAMS = 'ViewParams'
IMPORTED_SOLID = 'ImportedSolid'
RESULT_READ_PROG = 'ResultReadProg'

KEY_PART_ON_TABLE = 'PartOnTable'
KEY_RESULT = 'Result'
KEY_PALETTE = 'Palette'
KEY_LAYER_VIEW = 'LayerView'
KEY_SHELL_VIEW = 'ShellView'
KEY_INNER_NUM = 'InnerNum'
KEY_SEL_LAYER = 'SelLayer'
KEY_SLICE_ADV_MODE = 'SliceAdvMode'
KEY_SLICE_ADV_PERC = 'SliceAdvPerc'

RESULT = {
   OK = 1,
   KO_MINUS = 2,
   KO_PLUS = 3,
}

PALETTE_TYPE = {
   IN_OUT = 1,
   RESULTS = 2,
}

LAYER_VIEW_TYPE = {
   ALL = 1,
   TILL_SEL = 2,
   ONLY_SEL = 3,
}
SHELL_VIEW_TYPE = {
   ALL = 1,
   OUTER = 2,
   INNER = 3,
   INFILL = 4,
}
SLICE_ADV_TYPE = {
   ALL = 1,
   OUTER = 2,
   INNER = 3,
   INFILL = 4,
}

---------------------------------------------------------------------
SETTI_GRP="Setti"
SETTI_CRV="Setto"


---------------------------------------------------------------------
return AddManData