3dprinting/LuaLibs/AddManData.lua

-- AddManData.lua by Egaltech s.r.l. 2022/07/03
-- Raccolta costanti generali per Stampa 3d

-- Tabella per definizione modulo
local AddManData = {}

-- Intestazioni
require( 'EgtBase')

EgtOutLog( ' AddManData started', 1)

---------------------------------------------------------------------
SLICE_LAYER = "Slice"
CONTOUR_GRP = "Crv"
OUTER_CRV = "OuterCrv"
PATH_GRP = "Path"
SOLID_GRP = "Solid"
TOOLPATH_GRP = "ToolPath"
LAYER_SRF = "LayerSurf"
SHELL_CRV = "Shell"
EXTRA_SHELL_CRV = "ExtraShell"
INFILL_CRV = "Infill"
COASTING_CRV = "Coasting"
WIPE_CRV = "Wipe"
LEAD_IN_CRV = "LeadIn"
LEAD_OUT_CRV = "LeadOut"
LINK_CRV = "Link"
FRAME_PART = "FramePart"
START_GEOM = "Start"
TOT_SHELL_TRIM_SURF = "TotalShellSurfForTrim"
TRIM_SURF_LOOP = "TrimSurfLoop"
SURF_LOOP = "SurfLoop"

MIN_LEN = 0.1
MIN_AREA = 0.01
MIN_RIBS_LEN = 2
MIN_INFILL_LEN = 2

-- Parametri di lavorazione
SEC_DEFAULT = "Default"
KEY_PARAMS = "Params"
KEY_CALC_SOLIDS = "CalcSolids"
KEY_SPIRAL_VASE = "SpiralVase"
KEY_SLICING_TYPE = "SlicingType"
KEY_SLICING_DIR = "SlicingDir"
KEY_SLICE_STEP = "StrandH"
KEY_SHELLS_NBR = "StrandCount"
KEY_STRAND = "StrandW"
KEY_INNER_STRAND = "InnerStrandW"
KEY_STRAND_OVERLAP = "StrandOverlap"
KEY_OFFSET_SLICE = "Offset"
KEY_SP_OFFSET_ON_SLICE = "StartPointOffsetOnSlice"
KEY_STRAND_ORDER = "StrandOrder"
KEY_PRINT_ORDER = "PrintOrder"
KEY_PRINT_DIRECTION = "Direction"
KEY_TYPE = "Type"
KEY_LINK_TYPE = "LinkType"
KEY_LINK_PARAM = "LinkParam"
KEY_LINK_ZUP = "LinkZup"
KEY_SPEED = "Speed"
KEY_FEED = "Feed"
KEY_EXT_FEED = "ExtFeed"
KEY_INT_FEED = "IntFeed"
KEY_INFILL_FEED = "InfillFeed"
KEY_LEAD_IN_FEED = "LeadInFeed"
KEY_LEAD_OUT_FEED = "LeadOutFeed"
KEY_SUPPORT_FEED = "SupportFeed"
KEY_G0_FEED = "G0Feed"
KEY_MATERIAL = "Material"
KEY_LEAD_IN_TYPE = "LeadIn"
KEY_LEAD_IN_TANG_DIST = "LeadInTangDist"
KEY_LEAD_IN_ORTHO_DIST = "LeadInOrthoDist"
KEY_LEAD_OUT_TYPE = "LeadOut"
KEY_LEAD_OUT_TANG_DIST= "LeadOutTangDist"
KEY_LEAD_OUT_ORTHO_DIST= "LeadOutOrthoDist"
KEY_OFFSET_LEAD_POINT = "OffsetLeadPoint"
KEY_COASTING_LEN = "CoastingLen"
KEY_COASTING_FEED = "CoastingFeed"
KEY_WIPE_LEN = "WipeLen"
KEY_WIPE_DIR = "WipeDir"
KEY_WIPE_FEEDPU = "WipeFeedPu"
KEY_TOOL_DIAM = "ToolDiam"

-- Solid Fill
KEY_FLOOR_NBR = "FloorCount"
KEY_FLOOR_TYPE = "FloorType"
KEY_CEIL_NBR = "CeilCount"
KEY_CEIL_TYPE = "CeilType"
KEY_FILL_TYPE = "FillType"

-- Infill
KEY_INFILL_STRAND = "InfillStrandW"
KEY_INFILL_TYPE = "InfillType"
KEY_INFILL_DENSITY = "InfillDensity"
KEY_INFILL_LINK = "InfillLink"
KEY_INFILL_OVERLAP = "InfillOverlap"
KEY_INFILL_GRID_OVERLAP = "InfillGridOverlap"
KEY_INFILL_DIR = "InfillDirection"
KEY_INFILL_OFFSET_X = "InfillOffsetX"
KEY_INFILL_OFFSET_Y = "InfillOffsetY"
KEY_INFILL_COASTING = "InfillCoasting"
KEY_INFILL_WIPE = "InfillWipe"
KEY_INFILL_WIPE_DIR = "InfillWipeDir"

-- Ribs
KEY_RIBS_STRAND = "RibsStrandW"
KEY_RIBS_TYPE = "RibsType"
KEY_LIMIT_UNBDD_RIBS = "LimitUnboundedRibsWithSolid"
KEY_RIBS_OVERLAP = "RibsOverlap"
KEY_RIBS_SHELLS_NBR = "RibsStrandCount"
KEY_RIBS_LINK = "RibsLink"
KEY_RIBS_INVERT_DIR = "RibsInvertDirection"
KEY_RIBS_INVERT_ORDER = "RibsInvertOrder"
KEY_RIBS_LEAD_IN_INVERT = "RibsLeadInInvert"
KEY_RIBS_LEAD_IN_LEN = "RibsLeadInLen"
KEY_RIBS_LEAD_OUT_INVERT = "RibsLeadOutInvert"
KEY_RIBS_LEAD_OUT_LEN = "RibsLeadOutLen"
KEY_RIBS_LEAD_OUT_COASTING = "RibsLeadOutCoasting"
KEY_RIBS_LEAD_OUT_WIPE = "RibsLeadOutWipe"
KEY_RIBS_LEAD_OUT_WIPE_DIR = "RibsLeadOutWipeDir"
KEY_RIBS_INTERS = "RibsHaveIntersections"
KEY_RIBS_SPECIAL_CASE = "RibsSpecialCase"
KEY_SPLIT_ORDER = "SplitOrder"
KEY_SPLIT_AFTER_TRIM = "RibsSplitAfterTrim"
KEY_SPLIT_AFTER_TRIM_ORDER = "RibsSplitAfterTrimOrder"
KEY_SPLIT_AFTER_TRIM_TOT = "RibsSplitAfterTrimTot"
KEY_SPLIT_ID = "SplitId"
KEY_START_RIB = "StartRib"
KEY_ORIGINAL_RIB = "OriginalRib"
KEY_LOOP_RIB = "LoopRib"
KEY_RIBS_USER_LINK = "RibWithUserLink"
KEY_RIBS_USER_LINK_SAME_SIDE = "RibUserLinkOnSameSide"
KEY_RIBS_USER_LINK_CCW = "RibUserLinkCCW"
KEY_RIBS_USER_LINK_ORDER = "RibUserLinkOrder"
KEY_RIBS_USER_LINK_TOT = "RibsUserLinkParts"
KEY_RIBS_INVERT_STRAND_ORDER = "RibsInvertStrandOrder"

-- Regioni con diverso numero di passate
KEY_SHELL_NBR_DIFF = "ShellNbrDifference"
KEY_SHELL_NBR_COASTING = "ShellNbrCoasting"
KEY_SHELL_NBR_WIPE = "ShellNbrWipe"
KEY_SHELL_NBR_WIPE_DIR = "ShellNbrWipeDir"
KEY_EXTRA_SHELL_COASTING = "ExtraShellCoasting"
KEY_EXTRA_SHELL_WIPE = "ExtraShellWipe"
KEY_EXTRA_SHELL_WIPE_DIR = "ExtraShellWipeDir"

-- Solidi ausiliari
KEY_AUX_SOLIDS_STRAND = "AuxSolidsStrandW"
KEY_AUX_SOLIDS_SHELLS_NBR = "AuxSolidsStrandCount"
KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
KEY_AUX_SOLIDS_INFILL = "AuxSolidsInfill"
KEY_AUX_SOLIDS_PRINT_ORDER = "AuxSolidsStrandOrder"
KEY_AUX_SOLIDS_LINK_TYPE = "AuxSolidsLinkType"
KEY_AUX_SOLIDS_LINK_PARAM = "AuxSolidsLinkParam"
KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
KEY_AUX_SOLIDS_LP_OFFSET = "AuxSolidsOffsetLeadPoint"
KEY_AUX_SOLIDS_INFILL_LINK = "AuxSolidsInfillLink"
KEY_AUX_SOLIDS_DENSITY = "AuxSolidsDensity"
KEY_AUX_SOLIDS_DIR = "AuxSolidsDirection"
KEY_AUX_SOLIDS_OFFSET_X = "AuxSolidsOffsetX"
KEY_AUX_SOLIDS_OFFSET_Y = "AuxSolidsOffsetY"
KEY_AUX_SOLIDS_GRID_OVERLAP = "AuxSolidsGridOverlap"
KEY_AUX_SOLIDS_COASTING_LEN = "AuxSolidsCoastingLen"
KEY_AUX_SOLIDS_WIPE_LEN = "AuxSolidsWipeLen"
KEY_AUX_SOLIDS_WIPE_DIR = "AuxSolidsWipeDir"

-- Parametri di macchina
SEC_3DPRINTING = "3dPrinting"
KEY_COEFF_X = "CoeffX"
KEY_COEFF_Y = "CoeffY"
KEY_SPEED_MIN = "SpeedMin"
KEY_SPEED_MAX = "SpeedMax"

-- Altre chiavi
KEY_MAX_H = "SlicingHeight"
KEY_SLICE_NBR = "SliceNbr"
KEY_SLICE_Z = "SliceZ"
KEY_SLICE_DELTAZ = "DeltaZ"
KEY_SLICE_REAL_Z = "SliceRealZ"
KEY_ZIG_ZAG_INFILL = "ZigZagInfill"
KEY_ZIG_ZAG_DIR = "ZigZagDir"
KEY_INVERTED_CRV = "InvertedCrv"
KEY_CLOSED_CRV = "ClosedCrv"
KEY_ASSOCIATED_SURF = "AssociatedSurf"
KEY_ASSOCIATED_CRVS = "AssociatedCrvs"
KEY_ORIGINAL_SURF = "OriginalSurf"
KEY_HAS_SOLIDS = "Solids"
KEY_BOX_MIN_Z = "PartBoxMinZ"
KEY_ORIGINAL_START_POINT = "OriginalStartPoint"
KEY_FIRST_SOLID_LAY = "FirstSolidLay"
KEY_LAST_SOLID_LAY = "LastSolidLay"
KEY_ASSOCIATED_TP_CRV = "AssociatedToolPathCrv"
KEY_ASSOCIATED_P_CRV = "AssociatedPathCrv"
KEY_INTERNAL_SRF_LOOP = "InternalSrfLoop"
KEY_PREV_CRV = "PrevCrv"
KEY_NEXT_CRVS = "NextCrvs"
KEY_CRV_STRAND = "CurveStrand"
KEY_LAYER_CNT = "LayerCnt"

SLICING_TYPE = {
   VERTICAL = 1,
   DEG45_X = 2,
   DEG45_Y = 3,
   HORIZONTAL = 4,
}

TYPE = {
   OUTER_SHELL = 1,
   INNER_SHELL = 2,
   INFILL = 3,
   EXTRA_SHELL = 4,
   EXTRA_OUTER_SHELL = 5,
   LINK = 6,
   COASTING = 7,
   WIPE = 8,
   RIB = 9,
   AUX_SOLID = 10,
}

PRINT_ELEMENT = {
   SHELL = 1,
   EXTRA_SHELL = 2,
   INFILL = 3,
   AUX_SOLID = 4,
   RIB_UNBOUNDED = 5,
   RIB_EXTERNAL = 6,
   RIB_INTERNAL = 7,
   RIB_SUPPORT = 8,
}

PRINT_ORDER = {
   EXT_INT = 1,
   INT_EXT = 2,
}

PRINT_DIRECTION = {
   CCW = 1,
   CW = 2,
}

LINK_TYPE = {
   NONE = 1,
   LINEAR = 2,
   BIARC = 3,
}

LEAD_TYPE = {
   NONE = 1,
   LINEAR = 2,
   ARC = 3,
}

FILL_CATEGORY = {
   NONE = 0,
   SOLID_FILL = 16,
   INFILL = 32,
}

FILL_TYPE = {
   NONE = 0,
   OFFSET = 16,
   ZIGZAG = 17,
   LINES = 32,
   GRID = 33,
   ZIG_ZAG_GRID = 34,
   HONEYCOMB = 35,
   HONEYCOMB_GRID = 36,
}

RIB_TYPE = {
   INTERNAL = 1,
   EXTERNAL = 2,
   UNBOUNDED = 3,
   SUPPORT = 4,
}

---------------------------------------------------------------------
TABLE = "Table"
PART = "Part"
ORIGINAL_SOLID = "OriginalSolid"
PRINT_SOLID = "PrintSolid"
LAY_MACH_START = "MachStart"
LAY_RIBS = "Ribs"
LAY_AUX_SOLIDS = "AuxSolids"
LAY_SHELL_NBR = "ShellNumber"
LAY_AUX = "Aux"
LAY_FRAME = "Frame"
VIEWPARAMS = 'ViewParams'
IMPORTED_SOLID = 'ImportedSolid'
RESULT_READ_PROG = 'ResultReadProg'

KEY_PART_ON_TABLE = 'PartOnTable'
KEY_RESULT = 'Result'
KEY_WAITING_TIME = 'WaitingTime'
KEY_PALETTE = 'Palette'
KEY_LAYER_VIEW = 'LayerView'
KEY_SHELL_VIEW = 'ShellView'
KEY_INNER_NUM = 'InnerNum'
KEY_SEL_LAYER = 'SelLayer'
KEY_SLICE_ADV_MODE = 'SliceAdvMode'
KEY_SLICE_ADV_PERC = 'SliceAdvPerc'

KEY_MOVED_PART ='MovedPart'
KEY_MOVED_PART2 ='MovedPart2'

RESULT = {
   OK = 1,
   KO_MINUS = 2,
   KO_PLUS = 3,
}

PALETTE_TYPE = {
   IN_OUT = 1,
   RESULTS = 2,
}

LAYER_VIEW_TYPE = {
   ALL = 1,
   TILL_SEL = 2,
   ONLY_SEL = 3,
   FROM_SEL = 4,
}
SHELL_VIEW_TYPE = {
   ALL = 1,
   OUTER = 2,
   INNER = 3,
   INFILL = 4,
}
SLICE_ADV_TYPE = {
   ALL = 1,
   OUTER = 2,
   INNER = 3,
   INFILL = 4,
}

---------------------------------------------------------------------
RIBS_GRP = "Ribs"
RIBS_CRV = "Rib"
RIBS_LOOP_GRP = "RibsLoops"

SHELL_NBR_GRP = "ShellNbrRegions"
SHELL_NBR_CRV = "ShellNbrRegion"
SHELL_NBR_SURF = "ShellNbrSurf"

AUX_SOLIDS_GRP = "AuxSolids"
AUX_SOLIDS_INFILL_GRP = "InfillAuxSolids"
AUX_SOLIDS_CRV = "AuxSolid"
AUX_SOLIDS_INFILL_CRV = "InfillAuxSolid"
AUX_SOLIDS_SRF = "SrfAuxSolid"

INFILL_GRP = "Infill"
INFILL_CRV = "InfillCrv"

---------------------------------------------------------------------
-- parametri calcolo tempi, F ed S
LAY_TFSCALC = "TFSCalc"
KEY_TMIN = "TMin"
KEY_TTRG = "TTrg"
KEY_TMAX = "TMax"
KEY_FMIN = "FMin"
KEY_FTRG = "FTrg"
KEY_FMAX = "FMax"
KEY_TCUR = "TCur"
KEY_FCUR = "FCur"
KEY_LENGTH = "Length"
KEY_SLICEID = "SliceId"
KEY_MASS = "PrintMass"
KEY_MF = "MF"
KEY_TOTAREA = "TotArea"

---------------------------------------------------------------------
return AddManData