3dPrinting :

- riorganizzazione
- correzioni nel collegamento e nel riordino dei setti.

LuaLibs/AddManData.lua

@@ -10,7 +10,6 @@ require( 'EgtBase')
 EgtOutLog( ' AddManData started', 1)
 
 ---------------------------------------------------------------------
-PARAMS_GRP = "PrintingParams"
 SLICE_LAYER = "Slice"
 CONTOUR_GRP = "Crv"
 OUTER_CRV = "OuterCrv"
@@ -23,24 +22,19 @@ INFILL_CRV = "Infill"
 COASTING_CRV = "Coasting"
 WIPE_CRV = "Wipe"
 FRAME_PART = "FramePart"
+START_POINT = "StartPoint"
 
 MIN_LEN = 1e-3
 MIN_AREA = 1e-6
 
-INFO_PARTD_ID = "PartId"
-
-DEFAULT_SECTION = "Default"
-LAYER_SECTION = ""
+-- Parametri di lavorazione
+SEC_DEFAULT = "Default"
 KEY_SLICING_45 = "Slicing45"
 KEY_SLICING_DIR="SlicingDir"
-KEY_SLICE_Z = "SliceZ"
-KEY_SLICE_DELTAZ = "DeltaZ"
-KEY_SLICE_NBR = "SliceNbr"
 KEY_SLICE_STEP = "StrandH"
 KEY_SHELLS_NBR = "StrandCount"
 KEY_STRAND = "StrandW"
 KEY_OFFSET_SLICE ="Offset"
-KEY_START_POINT = "StartPoint"
 KEY_SP_OFFSET_ON_SLICE = "StartPointOffsetOnSlice"
 KEY_PRINT_ORDER = "StrandOrder"
 KEY_PRINT_DIRECTION = "Direction"
@@ -59,8 +53,6 @@ KEY_LEAD_OUT_FEED = "LeadOutFeed"
 KEY_SUPPORT_FEED = "SupportFeed"
 KEY_G0_FEED = "G0Feed"
 KEY_MATERIAL = "Material"
-KEY_COEFF_X = "CoeffX"
-KEY_COEFF_Y = "CoeffY"
 KEY_LEAD_IN_TYPE = "LeadIn"
 KEY_LEAD_IN_TANG_DIST = "LeadInTangDist"
 KEY_LEAD_IN_ORTHO_DIST = "LeadInOrthoDist"
@@ -73,6 +65,29 @@ KEY_COASTING_FEED = "CoastingFeed"
 KEY_WIPE_LEN = "WipeLen"
 KEY_WIPE_FEEDPU = "WipeFeedPu"
 KEY_TOOL_DIAM = "ToolDiam" 
+KEY_SETTI_OVERLAP = "SettiOverlap"
+KEY_SETTI_SHELLS_NBR = "SettiStrandCount"
+KEY_SETTI_LINK = "SettiLink"
+KEY_SETTI_INVERT = "SettiInvert"
+KEY_SETTI_LEAD_IN_INVERT = "SettiLeadInInvert"
+KEY_SETTI_LEAD_IN_LEN = "SettiLeadInLen"
+KEY_SETTI_LEAD_OUT_INVERT = "SettiLeadOutInvert"
+KEY_SETTI_LEAD_OUT_LEN = "SettiLeadOutLen"
+KEY_SETTI_LEAD_OUT_WIPE1 = "SettiLeadOutWipeTang"
+KEY_SETTI_LEAD_OUT_WIPE2 = "SettiLeadOutWipe"
+KEY_SETTI_LEAD_OUT_WIPE_DIR = "SettiLeadOutWipeDir"
+
+-- Parametri di macchina
+SEC_3DPRINTING = "3dPrinting"
+KEY_COEFF_X = "CoeffX"
+KEY_COEFF_Y = "CoeffY"
+
+-- Altre chiavi
+KEY_SLICE_NBR = "SliceNbr"
+KEY_SLICE_Z = "SliceZ"
+KEY_SLICE_DELTAZ = "DeltaZ"
+KEY_START_POINT = "StartPoint"
+
 
 TYPE = {
    OUTER_SHELL = 1,
@@ -114,10 +129,13 @@ TABLE_OUTLINE = "Outline"
 TABLE_SURFACE = "Surface"
 PART = "Part"
 ORIGINAL_SOLID = "OriginalSolid"
+LAY_AUX = "Aux"
+LAY_WALLS = "Walls"
 VIEWPARAMS = 'ViewParams'
 IMPORTED_SOLID = 'ImportedSolid'
 RESULT_READ_PROG = 'ResultReadProg'
 
+KEY_PART_ON_TABLE = 'PartOnTable'
 KEY_RESULT = 'Result'
 KEY_PALETTE = 'Palette'
 KEY_LAYER_VIEW = 'LayerView'
@@ -160,17 +178,6 @@ SLICE_ADV_TYPE = {
 SETTI_GRP="Setti"
 SETTI_CRV="Setto"
 
-KEY_SETTI_OVERLAP = "SettiOverlap"
-KEY_SETTI_SHELLS_NBR = "SettiStrandCount"
-KEY_SETTI_LINK = "SettiLink"
-KEY_SETTI_INVERT = "SettiInvert"
-KEY_SETTI_LEAD_IN_INVERT = "SettiLeadInInvert"
-KEY_SETTI_LEAD_IN_LEN = "SettiLeadInLen"
-KEY_SETTI_LEAD_OUT_INVERT = "SettiLeadOutInvert"
-KEY_SETTI_LEAD_OUT_LEN = "SettiLeadOutLen"
-KEY_SETTI_LEAD_OUT_WIPE1 = "SettiLeadOutWipeTang"
-KEY_SETTI_LEAD_OUT_WIPE2 = "SettiLeadOutWipe"
-KEY_SETTI_LEAD_OUT_WIPE_DIR = "SettiLeadOutWipeDir"
 
 ---------------------------------------------------------------------
 return AddManData